--- /dev/null
+/*
+ * This file function prototypes, data structure
+ * and definitions for all the host/station commands
+ */
+
+#ifndef _LBS_HOST_H_
+#define _LBS_HOST_H_
+
+#include "types.h"
+#include "defs.h"
+
+#define DEFAULT_AD_HOC_CHANNEL 6
+
+#define CMD_OPTION_WAITFORRSP 0x0002
+
+/* Host command IDs */
+
+/*
+ * Return command are almost always the same as the host command, but with
+ * bit 15 set high. There are a few exceptions, though...
+ */
+#define CMD_RET(cmd) (0x8000 | cmd)
+
+/* Return command convention exceptions: */
+#define CMD_RET_802_11_ASSOCIATE 0x8012
+
+/* Command codes */
+#define CMD_GET_HW_SPEC 0x0003
+#define CMD_EEPROM_UPDATE 0x0004
+#define CMD_802_11_RESET 0x0005
+#define CMD_802_11_SCAN 0x0006
+#define CMD_802_11_GET_LOG 0x000b
+#define CMD_MAC_MULTICAST_ADR 0x0010
+#define CMD_802_11_AUTHENTICATE 0x0011
+#define CMD_802_11_EEPROM_ACCESS 0x0059
+#define CMD_802_11_ASSOCIATE 0x0050
+#define CMD_802_11_SET_WEP 0x0013
+#define CMD_802_11_GET_STAT 0x0014
+#define CMD_802_3_GET_STAT 0x0015
+#define CMD_802_11_SNMP_MIB 0x0016
+#define CMD_MAC_REG_MAP 0x0017
+#define CMD_BBP_REG_MAP 0x0018
+#define CMD_MAC_REG_ACCESS 0x0019
+#define CMD_BBP_REG_ACCESS 0x001a
+#define CMD_RF_REG_ACCESS 0x001b
+#define CMD_802_11_RADIO_CONTROL 0x001c
+#define CMD_802_11_RF_CHANNEL 0x001d
+#define CMD_802_11_RF_TX_POWER 0x001e
+#define CMD_802_11_RSSI 0x001f
+#define CMD_802_11_RF_ANTENNA 0x0020
+#define CMD_802_11_PS_MODE 0x0021
+#define CMD_802_11_DATA_RATE 0x0022
+#define CMD_RF_REG_MAP 0x0023
+#define CMD_802_11_DEAUTHENTICATE 0x0024
+#define CMD_802_11_REASSOCIATE 0x0025
+#define CMD_MAC_CONTROL 0x0028
+#define CMD_802_11_AD_HOC_START 0x002b
+#define CMD_802_11_AD_HOC_JOIN 0x002c
+#define CMD_802_11_QUERY_TKIP_REPLY_CNTRS 0x002e
+#define CMD_802_11_ENABLE_RSN 0x002f
+#define CMD_802_11_SET_AFC 0x003c
+#define CMD_802_11_GET_AFC 0x003d
+#define CMD_802_11_DEEP_SLEEP 0x003e
+#define CMD_802_11_AD_HOC_STOP 0x0040
+#define CMD_802_11_HOST_SLEEP_CFG 0x0043
+#define CMD_802_11_WAKEUP_CONFIRM 0x0044
+#define CMD_802_11_HOST_SLEEP_ACTIVATE 0x0045
+#define CMD_802_11_BEACON_STOP 0x0049
+#define CMD_802_11_MAC_ADDRESS 0x004d
+#define CMD_802_11_LED_GPIO_CTRL 0x004e
+#define CMD_802_11_BAND_CONFIG 0x0058
+#define CMD_GSPI_BUS_CONFIG 0x005a
+#define CMD_802_11D_DOMAIN_INFO 0x005b
+#define CMD_802_11_KEY_MATERIAL 0x005e
+#define CMD_802_11_SLEEP_PARAMS 0x0066
+#define CMD_802_11_INACTIVITY_TIMEOUT 0x0067
+#define CMD_802_11_SLEEP_PERIOD 0x0068
+#define CMD_802_11_TPC_CFG 0x0072
+#define CMD_802_11_PA_CFG 0x0073
+#define CMD_802_11_FW_WAKE_METHOD 0x0074
+#define CMD_802_11_SUBSCRIBE_EVENT 0x0075
+#define CMD_802_11_RATE_ADAPT_RATESET 0x0076
+#define CMD_802_11_TX_RATE_QUERY 0x007f
+#define CMD_GET_TSF 0x0080
+#define CMD_BT_ACCESS 0x0087
+#define CMD_FWT_ACCESS 0x0095
+#define CMD_802_11_MONITOR_MODE 0x0098
+#define CMD_MESH_ACCESS 0x009b
+#define CMD_MESH_CONFIG_OLD 0x00a3
+#define CMD_MESH_CONFIG 0x00ac
+#define CMD_SET_BOOT2_VER 0x00a5
+#define CMD_FUNC_INIT 0x00a9
+#define CMD_FUNC_SHUTDOWN 0x00aa
+#define CMD_802_11_BEACON_CTRL 0x00b0
+
+/* For the IEEE Power Save */
+#define PS_MODE_ACTION_ENTER_PS 0x0030
+#define PS_MODE_ACTION_EXIT_PS 0x0031
+#define PS_MODE_ACTION_SLEEP_CONFIRMED 0x0034
+
+#define CMD_ENABLE_RSN 0x0001
+#define CMD_DISABLE_RSN 0x0000
+
+#define CMD_ACT_GET 0x0000
+#define CMD_ACT_SET 0x0001
+
+/* Define action or option for CMD_802_11_SET_WEP */
+#define CMD_ACT_ADD 0x0002
+#define CMD_ACT_REMOVE 0x0004
+
+#define CMD_TYPE_WEP_40_BIT 0x01
+#define CMD_TYPE_WEP_104_BIT 0x02
+
+#define CMD_NUM_OF_WEP_KEYS 4
+
+#define CMD_WEP_KEY_INDEX_MASK 0x3fff
+
+/* Define action or option for CMD_802_11_SCAN */
+#define CMD_BSS_TYPE_BSS 0x0001
+#define CMD_BSS_TYPE_IBSS 0x0002
+#define CMD_BSS_TYPE_ANY 0x0003
+
+/* Define action or option for CMD_802_11_SCAN */
+#define CMD_SCAN_TYPE_ACTIVE 0x0000
+#define CMD_SCAN_TYPE_PASSIVE 0x0001
+
+#define CMD_SCAN_RADIO_TYPE_BG 0
+
+#define CMD_SCAN_PROBE_DELAY_TIME 0
+
+/* Define action or option for CMD_MAC_CONTROL */
+#define CMD_ACT_MAC_RX_ON 0x0001
+#define CMD_ACT_MAC_TX_ON 0x0002
+#define CMD_ACT_MAC_LOOPBACK_ON 0x0004
+#define CMD_ACT_MAC_WEP_ENABLE 0x0008
+#define CMD_ACT_MAC_INT_ENABLE 0x0010
+#define CMD_ACT_MAC_MULTICAST_ENABLE 0x0020
+#define CMD_ACT_MAC_BROADCAST_ENABLE 0x0040
+#define CMD_ACT_MAC_PROMISCUOUS_ENABLE 0x0080
+#define CMD_ACT_MAC_ALL_MULTICAST_ENABLE 0x0100
+#define CMD_ACT_MAC_STRICT_PROTECTION_ENABLE 0x0400
+
+/* Event flags for CMD_802_11_SUBSCRIBE_EVENT */
+#define CMD_SUBSCRIBE_RSSI_LOW 0x0001
+#define CMD_SUBSCRIBE_SNR_LOW 0x0002
+#define CMD_SUBSCRIBE_FAILCOUNT 0x0004
+#define CMD_SUBSCRIBE_BCNMISS 0x0008
+#define CMD_SUBSCRIBE_RSSI_HIGH 0x0010
+#define CMD_SUBSCRIBE_SNR_HIGH 0x0020
+
+#define RADIO_PREAMBLE_LONG 0x00
+#define RADIO_PREAMBLE_SHORT 0x02
+#define RADIO_PREAMBLE_AUTO 0x04
+
+/* Define action or option for CMD_802_11_RF_CHANNEL */
+#define CMD_OPT_802_11_RF_CHANNEL_GET 0x00
+#define CMD_OPT_802_11_RF_CHANNEL_SET 0x01
+
+/* Define action or option for CMD_802_11_DATA_RATE */
+#define CMD_ACT_SET_TX_AUTO 0x0000
+#define CMD_ACT_SET_TX_FIX_RATE 0x0001
+#define CMD_ACT_GET_TX_RATE 0x0002
+
+/* Options for CMD_802_11_FW_WAKE_METHOD */
+#define CMD_WAKE_METHOD_UNCHANGED 0x0000
+#define CMD_WAKE_METHOD_COMMAND_INT 0x0001
+#define CMD_WAKE_METHOD_GPIO 0x0002
+
+/* Object IDs for CMD_802_11_SNMP_MIB */
+#define SNMP_MIB_OID_BSS_TYPE 0x0000
+#define SNMP_MIB_OID_OP_RATE_SET 0x0001
+#define SNMP_MIB_OID_BEACON_PERIOD 0x0002 /* Reserved on v9+ */
+#define SNMP_MIB_OID_DTIM_PERIOD 0x0003 /* Reserved on v9+ */
+#define SNMP_MIB_OID_ASSOC_TIMEOUT 0x0004 /* Reserved on v9+ */
+#define SNMP_MIB_OID_RTS_THRESHOLD 0x0005
+#define SNMP_MIB_OID_SHORT_RETRY_LIMIT 0x0006
+#define SNMP_MIB_OID_LONG_RETRY_LIMIT 0x0007
+#define SNMP_MIB_OID_FRAG_THRESHOLD 0x0008
+#define SNMP_MIB_OID_11D_ENABLE 0x0009
+#define SNMP_MIB_OID_11H_ENABLE 0x000A
+
+/* Define action or option for CMD_BT_ACCESS */
+enum cmd_bt_access_opts {
+ /* The bt commands start at 5 instead of 1 because the old dft commands
+ * are mapped to 1-4. These old commands are no longer maintained and
+ * should not be called.
+ */
+ CMD_ACT_BT_ACCESS_ADD = 5,
+ CMD_ACT_BT_ACCESS_DEL,
+ CMD_ACT_BT_ACCESS_LIST,
+ CMD_ACT_BT_ACCESS_RESET,
+ CMD_ACT_BT_ACCESS_SET_INVERT,
+ CMD_ACT_BT_ACCESS_GET_INVERT
+};
+
+/* Define action or option for CMD_FWT_ACCESS */
+enum cmd_fwt_access_opts {
+ CMD_ACT_FWT_ACCESS_ADD = 1,
+ CMD_ACT_FWT_ACCESS_DEL,
+ CMD_ACT_FWT_ACCESS_LOOKUP,
+ CMD_ACT_FWT_ACCESS_LIST,
+ CMD_ACT_FWT_ACCESS_LIST_ROUTE,
+ CMD_ACT_FWT_ACCESS_LIST_NEIGHBOR,
+ CMD_ACT_FWT_ACCESS_RESET,
+ CMD_ACT_FWT_ACCESS_CLEANUP,
+ CMD_ACT_FWT_ACCESS_TIME,
+};
+
+/* Define action or option for CMD_802_11_HOST_SLEEP_CFG */
+enum cmd_wol_cfg_opts {
+ CMD_ACT_ACTION_NONE = 0,
+ CMD_ACT_SET_WOL_RULE,
+ CMD_ACT_GET_WOL_RULE,
+ CMD_ACT_RESET_WOL_RULE,
+};
+
+/* Define action or option for CMD_MESH_ACCESS */
+enum cmd_mesh_access_opts {
+ CMD_ACT_MESH_GET_TTL = 1,
+ CMD_ACT_MESH_SET_TTL,
+ CMD_ACT_MESH_GET_STATS,
+ CMD_ACT_MESH_GET_ANYCAST,
+ CMD_ACT_MESH_SET_ANYCAST,
+ CMD_ACT_MESH_SET_LINK_COSTS,
+ CMD_ACT_MESH_GET_LINK_COSTS,
+ CMD_ACT_MESH_SET_BCAST_RATE,
+ CMD_ACT_MESH_GET_BCAST_RATE,
+ CMD_ACT_MESH_SET_RREQ_DELAY,
+ CMD_ACT_MESH_GET_RREQ_DELAY,
+ CMD_ACT_MESH_SET_ROUTE_EXP,
+ CMD_ACT_MESH_GET_ROUTE_EXP,
+ CMD_ACT_MESH_SET_AUTOSTART_ENABLED,
+ CMD_ACT_MESH_GET_AUTOSTART_ENABLED,
+ CMD_ACT_MESH_SET_GET_PRB_RSP_LIMIT = 17,
+};
+
+/* Define actions and types for CMD_MESH_CONFIG */
+enum cmd_mesh_config_actions {
+ CMD_ACT_MESH_CONFIG_STOP = 0,
+ CMD_ACT_MESH_CONFIG_START,
+ CMD_ACT_MESH_CONFIG_SET,
+ CMD_ACT_MESH_CONFIG_GET,
+};
+
+enum cmd_mesh_config_types {
+ CMD_TYPE_MESH_SET_BOOTFLAG = 1,
+ CMD_TYPE_MESH_SET_BOOTTIME,
+ CMD_TYPE_MESH_SET_DEF_CHANNEL,
+ CMD_TYPE_MESH_SET_MESH_IE,
+ CMD_TYPE_MESH_GET_DEFAULTS,
+ CMD_TYPE_MESH_GET_MESH_IE, /* GET_DEFAULTS is superset of GET_MESHIE */
+};
+
+/* Card Event definition */
+#define MACREG_INT_CODE_TX_PPA_FREE 0
+#define MACREG_INT_CODE_TX_DMA_DONE 1
+#define MACREG_INT_CODE_LINK_LOST_W_SCAN 2
+#define MACREG_INT_CODE_LINK_LOST_NO_SCAN 3
+#define MACREG_INT_CODE_LINK_SENSED 4
+#define MACREG_INT_CODE_CMD_FINISHED 5
+#define MACREG_INT_CODE_MIB_CHANGED 6
+#define MACREG_INT_CODE_INIT_DONE 7
+#define MACREG_INT_CODE_DEAUTHENTICATED 8
+#define MACREG_INT_CODE_DISASSOCIATED 9
+#define MACREG_INT_CODE_PS_AWAKE 10
+#define MACREG_INT_CODE_PS_SLEEP 11
+#define MACREG_INT_CODE_MIC_ERR_MULTICAST 13
+#define MACREG_INT_CODE_MIC_ERR_UNICAST 14
+#define MACREG_INT_CODE_WM_AWAKE 15
+#define MACREG_INT_CODE_DEEP_SLEEP_AWAKE 16
+#define MACREG_INT_CODE_ADHOC_BCN_LOST 17
+#define MACREG_INT_CODE_HOST_AWAKE 18
+#define MACREG_INT_CODE_STOP_TX 19
+#define MACREG_INT_CODE_START_TX 20
+#define MACREG_INT_CODE_CHANNEL_SWITCH 21
+#define MACREG_INT_CODE_MEASUREMENT_RDY 22
+#define MACREG_INT_CODE_WMM_CHANGE 23
+#define MACREG_INT_CODE_BG_SCAN_REPORT 24
+#define MACREG_INT_CODE_RSSI_LOW 25
+#define MACREG_INT_CODE_SNR_LOW 26
+#define MACREG_INT_CODE_MAX_FAIL 27
+#define MACREG_INT_CODE_RSSI_HIGH 28
+#define MACREG_INT_CODE_SNR_HIGH 29
+#define MACREG_INT_CODE_MESH_AUTO_STARTED 35
+#define MACREG_INT_CODE_FIRMWARE_READY 48
+
+
+/* 802.11-related definitions */
+
+/* TxPD descriptor */
+struct txpd {
+ /* union to cope up with later FW revisions */
+ union {
+ /* Current Tx packet status */
+ __le32 tx_status;
+ struct {
+ /* BSS type: client, AP, etc. */
+ u8 bss_type;
+ /* BSS number */
+ u8 bss_num;
+ /* Reserved */
+ __le16 reserved;
+ } bss;
+ } u;
+ /* Tx control */
+ __le32 tx_control;
+ __le32 tx_packet_location;
+ /* Tx packet length */
+ __le16 tx_packet_length;
+ /* First 2 byte of destination MAC address */
+ u8 tx_dest_addr_high[2];
+ /* Last 4 byte of destination MAC address */
+ u8 tx_dest_addr_low[4];
+ /* Pkt Priority */
+ u8 priority;
+ /* Pkt Trasnit Power control */
+ u8 powermgmt;
+ /* Amount of time the packet has been queued (units = 2ms) */
+ u8 pktdelay_2ms;
+ /* reserved */
+ u8 reserved1;
+} __packed;
+
+/* RxPD Descriptor */
+struct rxpd {
+ /* union to cope up with later FW revisions */
+ union {
+ /* Current Rx packet status */
+ __le16 status;
+ struct {
+ /* BSS type: client, AP, etc. */
+ u8 bss_type;
+ /* BSS number */
+ u8 bss_num;
+ } __packed bss;
+ } __packed u;
+
+ /* SNR */
+ u8 snr;
+
+ /* Tx control */
+ u8 rx_control;
+
+ /* Pkt length */
+ __le16 pkt_len;
+
+ /* Noise Floor */
+ u8 nf;
+
+ /* Rx Packet Rate */
+ u8 rx_rate;
+
+ /* Pkt addr */
+ __le32 pkt_ptr;
+
+ /* Next Rx RxPD addr */
+ __le32 next_rxpd_ptr;
+
+ /* Pkt Priority */
+ u8 priority;
+ u8 reserved[3];
+} __packed;
+
+struct cmd_header {
+ __le16 command;
+ __le16 size;
+ __le16 seqnum;
+ __le16 result;
+} __packed;
+
+/* Generic structure to hold all key types. */
+struct enc_key {
+ u16 len;
+ u16 flags; /* KEY_INFO_* from defs.h */
+ u16 type; /* KEY_TYPE_* from defs.h */
+ u8 key[32];
+};
+
+/* lbs_offset_value */
+struct lbs_offset_value {
+ u32 offset;
+ u32 value;
+} __packed;
+
+#define MAX_11D_TRIPLETS 83
+
+struct mrvl_ie_domain_param_set {
+ struct mrvl_ie_header header;
+
+ u8 country_code[IEEE80211_COUNTRY_STRING_LEN];
+ struct ieee80211_country_ie_triplet triplet[MAX_11D_TRIPLETS];
+} __packed;
+
+struct cmd_ds_802_11d_domain_info {
+ struct cmd_header hdr;
+
+ __le16 action;
+ struct mrvl_ie_domain_param_set domain;
+} __packed;
+
+/*
+ * Define data structure for CMD_GET_HW_SPEC
+ * This structure defines the response for the GET_HW_SPEC command
+ */
+struct cmd_ds_get_hw_spec {
+ struct cmd_header hdr;
+
+ /* HW Interface version number */
+ __le16 hwifversion;
+ /* HW version number */
+ __le16 version;
+ /* Max number of TxPD FW can handle */
+ __le16 nr_txpd;
+ /* Max no of Multicast address */
+ __le16 nr_mcast_adr;
+ /* MAC address */
+ u8 permanentaddr[6];
+
+ /* region Code */
+ __le16 regioncode;
+
+ /* Number of antenna used */
+ __le16 nr_antenna;
+
+ /* FW release number, example 0x01030304 = 2.3.4p1 */
+ __le32 fwrelease;
+
+ /* Base Address of TxPD queue */
+ __le32 wcb_base;
+ /* Read Pointer of RxPd queue */
+ __le32 rxpd_rdptr;
+
+ /* Write Pointer of RxPd queue */
+ __le32 rxpd_wrptr;
+
+ /*FW/HW capability */
+ __le32 fwcapinfo;
+} __packed;
+
+struct cmd_ds_802_11_subscribe_event {
+ struct cmd_header hdr;
+
+ __le16 action;
+ __le16 events;
+
+ /* A TLV to the CMD_802_11_SUBSCRIBE_EVENT command can contain a
+ * number of TLVs. From the v5.1 manual, those TLVs would add up to
+ * 40 bytes. However, future firmware might add additional TLVs, so I
+ * bump this up a bit.
+ */
+ uint8_t tlv[128];
+} __packed;
+
+/*
+ * This scan handle Country Information IE(802.11d compliant)
+ * Define data structure for CMD_802_11_SCAN
+ */
+struct cmd_ds_802_11_scan {
+ struct cmd_header hdr;
+
+ uint8_t bsstype;
+ uint8_t bssid[ETH_ALEN];
+ uint8_t tlvbuffer[0];
+} __packed;
+
+struct cmd_ds_802_11_scan_rsp {
+ struct cmd_header hdr;
+
+ __le16 bssdescriptsize;
+ uint8_t nr_sets;
+ uint8_t bssdesc_and_tlvbuffer[0];
+} __packed;
+
+struct cmd_ds_802_11_get_log {
+ struct cmd_header hdr;
+
+ __le32 mcasttxframe;
+ __le32 failed;
+ __le32 retry;
+ __le32 multiretry;
+ __le32 framedup;
+ __le32 rtssuccess;
+ __le32 rtsfailure;
+ __le32 ackfailure;
+ __le32 rxfrag;
+ __le32 mcastrxframe;
+ __le32 fcserror;
+ __le32 txframe;
+ __le32 wepundecryptable;
+} __packed;
+
+struct cmd_ds_mac_control {
+ struct cmd_header hdr;
+ __le16 action;
+ u16 reserved;
+} __packed;
+
+struct cmd_ds_mac_multicast_adr {
+ struct cmd_header hdr;
+ __le16 action;
+ __le16 nr_of_adrs;
+ u8 maclist[ETH_ALEN * MRVDRV_MAX_MULTICAST_LIST_SIZE];
+} __packed;
+
+struct cmd_ds_802_11_authenticate {
+ struct cmd_header hdr;
+
+ u8 bssid[ETH_ALEN];
+ u8 authtype;
+ u8 reserved[10];
+} __packed;
+
+struct cmd_ds_802_11_deauthenticate {
+ struct cmd_header hdr;
+
+ u8 macaddr[ETH_ALEN];
+ __le16 reasoncode;
+} __packed;
+
+struct cmd_ds_802_11_associate {
+ struct cmd_header hdr;
+
+ u8 bssid[6];
+ __le16 capability;
+ __le16 listeninterval;
+ __le16 bcnperiod;
+ u8 dtimperiod;
+ u8 iebuf[512]; /* Enough for required and most optional IEs */
+} __packed;
+
+struct cmd_ds_802_11_associate_response {
+ struct cmd_header hdr;
+
+ __le16 capability;
+ __le16 statuscode;
+ __le16 aid;
+ u8 iebuf[512];
+} __packed;
+
+struct cmd_ds_802_11_set_wep {
+ struct cmd_header hdr;
+
+ /* ACT_ADD, ACT_REMOVE or ACT_ENABLE */
+ __le16 action;
+
+ /* key Index selected for Tx */
+ __le16 keyindex;
+
+ /* 40, 128bit or TXWEP */
+ uint8_t keytype[4];
+ uint8_t keymaterial[4][16];
+} __packed;
+
+struct cmd_ds_802_11_snmp_mib {
+ struct cmd_header hdr;
+
+ __le16 action;
+ __le16 oid;
+ __le16 bufsize;
+ u8 value[128];
+} __packed;
+
+struct cmd_ds_reg_access {
+ struct cmd_header hdr;
+
+ __le16 action;
+ __le16 offset;
+ union {
+ u8 bbp_rf; /* for BBP and RF registers */
+ __le32 mac; /* for MAC registers */
+ } value;
+} __packed;
+
+struct cmd_ds_802_11_radio_control {
+ struct cmd_header hdr;
+
+ __le16 action;
+ __le16 control;
+} __packed;
+
+struct cmd_ds_802_11_beacon_control {
+ struct cmd_header hdr;
+
+ __le16 action;
+ __le16 beacon_enable;
+ __le16 beacon_period;
+} __packed;
+
+struct cmd_ds_802_11_sleep_params {
+ struct cmd_header hdr;
+
+ /* ACT_GET/ACT_SET */
+ __le16 action;
+
+ /* Sleep clock error in ppm */
+ __le16 error;
+
+ /* Wakeup offset in usec */
+ __le16 offset;
+
+ /* Clock stabilization time in usec */
+ __le16 stabletime;
+
+ /* control periodic calibration */
+ uint8_t calcontrol;
+
+ /* control the use of external sleep clock */
+ uint8_t externalsleepclk;
+
+ /* reserved field, should be set to zero */
+ __le16 reserved;
+} __packed;
+
+struct cmd_ds_802_11_rf_channel {
+ struct cmd_header hdr;
+
+ __le16 action;
+ __le16 channel;
+ __le16 rftype; /* unused */
+ __le16 reserved; /* unused */
+ u8 channellist[32]; /* unused */
+} __packed;
+
+struct cmd_ds_802_11_rssi {
+ struct cmd_header hdr;
+
+ /*
+ * request: number of beacons (N) to average the SNR and NF over
+ * response: SNR of most recent beacon
+ */
+ __le16 n_or_snr;
+
+ /*
+ * The following fields are only set in the response.
+ * In the request these are reserved and should be set to 0.
+ */
+ __le16 nf; /* most recent beacon noise floor */
+ __le16 avg_snr; /* average SNR weighted by N from request */
+ __le16 avg_nf; /* average noise floor weighted by N from request */
+} __packed;
+
+struct cmd_ds_802_11_mac_address {
+ struct cmd_header hdr;
+
+ __le16 action;
+ u8 macadd[ETH_ALEN];
+} __packed;
+
+struct cmd_ds_802_11_rf_tx_power {
+ struct cmd_header hdr;
+
+ __le16 action;
+ __le16 curlevel;
+ s8 maxlevel;
+ s8 minlevel;
+} __packed;
+
+/* MONITOR_MODE only exists in OLPC v5 firmware */
+struct cmd_ds_802_11_monitor_mode {
+ struct cmd_header hdr;
+
+ __le16 action;
+ __le16 mode;
+} __packed;
+
+struct cmd_ds_set_boot2_ver {
+ struct cmd_header hdr;
+
+ __le16 action;
+ __le16 version;
+} __packed;
+
+struct cmd_ds_802_11_fw_wake_method {
+ struct cmd_header hdr;
+
+ __le16 action;
+ __le16 method;
+} __packed;
+
+struct cmd_ds_802_11_ps_mode {
+ struct cmd_header hdr;
+
+ __le16 action;
+
+ /*
+ * Interval for keepalive in PS mode:
+ * 0x0000 = don't change
+ * 0x001E = firmware default
+ * 0xFFFF = disable
+ */
+ __le16 nullpktinterval;
+
+ /*
+ * Number of DTIM intervals to wake up for:
+ * 0 = don't change
+ * 1 = firmware default
+ * 5 = max
+ */
+ __le16 multipledtim;
+
+ __le16 reserved;
+ __le16 locallisteninterval;
+
+ /*
+ * AdHoc awake period (FW v9+ only):
+ * 0 = don't change
+ * 1 = always awake (IEEE standard behavior)
+ * 2 - 31 = sleep for (n - 1) periods and awake for 1 period
+ * 32 - 254 = invalid
+ * 255 = sleep at each ATIM
+ */
+ __le16 adhoc_awake_period;
+} __packed;
+
+struct cmd_confirm_sleep {
+ struct cmd_header hdr;
+
+ __le16 action;
+ __le16 nullpktinterval;
+ __le16 multipledtim;
+ __le16 reserved;
+ __le16 locallisteninterval;
+} __packed;
+
+struct cmd_ds_802_11_data_rate {
+ struct cmd_header hdr;
+
+ __le16 action;
+ __le16 reserved;
+ u8 rates[MAX_RATES];
+} __packed;
+
+struct cmd_ds_802_11_rate_adapt_rateset {
+ struct cmd_header hdr;
+ __le16 action;
+ __le16 enablehwauto;
+ __le16 bitmap;
+} __packed;
+
+struct cmd_ds_802_11_ad_hoc_start {
+ struct cmd_header hdr;
+
+ u8 ssid[IEEE80211_MAX_SSID_LEN];
+ u8 bsstype;
+ __le16 beaconperiod;
+ u8 dtimperiod; /* Reserved on v9 and later */
+ struct ieee_ie_ibss_param_set ibss;
+ u8 reserved1[4];
+ struct ieee_ie_ds_param_set ds;
+ u8 reserved2[4];
+ __le16 probedelay; /* Reserved on v9 and later */
+ __le16 capability;
+ u8 rates[MAX_RATES];
+ u8 tlv_memory_size_pad[100];
+} __packed;
+
+struct cmd_ds_802_11_ad_hoc_result {
+ struct cmd_header hdr;
+
+ u8 pad[3];
+ u8 bssid[ETH_ALEN];
+} __packed;
+
+struct adhoc_bssdesc {
+ u8 bssid[ETH_ALEN];
+ u8 ssid[IEEE80211_MAX_SSID_LEN];
+ u8 type;
+ __le16 beaconperiod;
+ u8 dtimperiod;
+ __le64 timestamp;
+ __le64 localtime;
+ struct ieee_ie_ds_param_set ds;
+ u8 reserved1[4];
+ struct ieee_ie_ibss_param_set ibss;
+ u8 reserved2[4];
+ __le16 capability;
+ u8 rates[MAX_RATES];
+
+ /*
+ * DO NOT ADD ANY FIELDS TO THIS STRUCTURE. It is used below in the
+ * Adhoc join command and will cause a binary layout mismatch with
+ * the firmware
+ */
+} __packed;
+
+struct cmd_ds_802_11_ad_hoc_join {
+ struct cmd_header hdr;
+
+ struct adhoc_bssdesc bss;
+ __le16 failtimeout; /* Reserved on v9 and later */
+ __le16 probedelay; /* Reserved on v9 and later */
+} __packed;
+
+struct cmd_ds_802_11_ad_hoc_stop {
+ struct cmd_header hdr;
+} __packed;
+
+struct cmd_ds_802_11_enable_rsn {
+ struct cmd_header hdr;
+
+ __le16 action;
+ __le16 enable;
+} __packed;
+
+struct MrvlIEtype_keyParamSet {
+ /* type ID */
+ __le16 type;
+
+ /* length of Payload */
+ __le16 length;
+
+ /* type of key: WEP=0, TKIP=1, AES=2 */
+ __le16 keytypeid;
+
+ /* key control Info specific to a keytypeid */
+ __le16 keyinfo;
+
+ /* length of key */
+ __le16 keylen;
+
+ /* key material of size keylen */
+ u8 key[32];
+} __packed;
+
+#define MAX_WOL_RULES 16
+
+struct host_wol_rule {
+ uint8_t rule_no;
+ uint8_t rule_ops;
+ __le16 sig_offset;
+ __le16 sig_length;
+ __le16 reserve;
+ __be32 sig_mask;
+ __be32 signature;
+} __packed;
+
+struct wol_config {
+ uint8_t action;
+ uint8_t pattern;
+ uint8_t no_rules_in_cmd;
+ uint8_t result;
+ struct host_wol_rule rule[MAX_WOL_RULES];
+} __packed;
+
+struct cmd_ds_host_sleep {
+ struct cmd_header hdr;
+ __le32 criteria;
+ uint8_t gpio;
+ uint16_t gap;
+ struct wol_config wol_conf;
+} __packed;
+
+
+
+struct cmd_ds_802_11_key_material {
+ struct cmd_header hdr;
+
+ __le16 action;
+ struct MrvlIEtype_keyParamSet keyParamSet[2];
+} __packed;
+
+struct cmd_ds_802_11_eeprom_access {
+ struct cmd_header hdr;
+ __le16 action;
+ __le16 offset;
+ __le16 len;
+ /* firmware says it returns a maximum of 20 bytes */
+#define LBS_EEPROM_READ_LEN 20
+ u8 value[LBS_EEPROM_READ_LEN];
+} __packed;
+
+struct cmd_ds_802_11_tpc_cfg {
+ struct cmd_header hdr;
+
+ __le16 action;
+ uint8_t enable;
+ int8_t P0;
+ int8_t P1;
+ int8_t P2;
+ uint8_t usesnr;
+} __packed;
+
+
+struct cmd_ds_802_11_pa_cfg {
+ struct cmd_header hdr;
+
+ __le16 action;
+ uint8_t enable;
+ int8_t P0;
+ int8_t P1;
+ int8_t P2;
+} __packed;
+
+
+struct cmd_ds_802_11_led_ctrl {
+ struct cmd_header hdr;
+
+ __le16 action;
+ __le16 numled;
+ u8 data[256];
+} __packed;
+
+/* Automatic Frequency Control */
+struct cmd_ds_802_11_afc {
+ struct cmd_header hdr;
+
+ __le16 afc_auto;
+ union {
+ struct {
+ __le16 threshold;
+ __le16 period;
+ };
+ struct {
+ __le16 timing_offset; /* signed */
+ __le16 carrier_offset; /* signed */
+ };
+ };
+} __packed;
+
+struct cmd_tx_rate_query {
+ __le16 txrate;
+} __packed;
+
+struct cmd_ds_get_tsf {
+ __le64 tsfvalue;
+} __packed;
+
+struct cmd_ds_bt_access {
+ struct cmd_header hdr;
+
+ __le16 action;
+ __le32 id;
+ u8 addr1[ETH_ALEN];
+ u8 addr2[ETH_ALEN];
+} __packed;
+
+struct cmd_ds_fwt_access {
+ struct cmd_header hdr;
+
+ __le16 action;
+ __le32 id;
+ u8 valid;
+ u8 da[ETH_ALEN];
+ u8 dir;
+ u8 ra[ETH_ALEN];
+ __le32 ssn;
+ __le32 dsn;
+ __le32 metric;
+ u8 rate;
+ u8 hopcount;
+ u8 ttl;
+ __le32 expiration;
+ u8 sleepmode;
+ __le32 snr;
+ __le32 references;
+ u8 prec[ETH_ALEN];
+} __packed;
+
+struct cmd_ds_mesh_config {
+ struct cmd_header hdr;
+
+ __le16 action;
+ __le16 channel;
+ __le16 type;
+ __le16 length;
+ u8 data[128]; /* last position reserved */
+} __packed;
+
+struct cmd_ds_mesh_access {
+ struct cmd_header hdr;
+
+ __le16 action;
+ __le32 data[32]; /* last position reserved */
+} __packed;
+
+/* Number of stats counters returned by the firmware */
+#define MESH_STATS_NUM 8
+#endif
Code Review / kvmfornfv.git / blobdiff