Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / net / wireless / iwlwifi / mvm / phy-ctxt.c
diff --git a/kernel/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c b/kernel/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
new file mode 100644 (file)
index 0000000..e68a475
--- /dev/null
@@ -0,0 +1,295 @@
+/******************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
+ * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called COPYING.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
+ * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *  * Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  * Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  * Neither the name Intel Corporation nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *****************************************************************************/
+
+#include <net/mac80211.h>
+#include "fw-api.h"
+#include "mvm.h"
+
+/* Maps the driver specific channel width definition to the fw values */
+u8 iwl_mvm_get_channel_width(struct cfg80211_chan_def *chandef)
+{
+       switch (chandef->width) {
+       case NL80211_CHAN_WIDTH_20_NOHT:
+       case NL80211_CHAN_WIDTH_20:
+               return PHY_VHT_CHANNEL_MODE20;
+       case NL80211_CHAN_WIDTH_40:
+               return PHY_VHT_CHANNEL_MODE40;
+       case NL80211_CHAN_WIDTH_80:
+               return PHY_VHT_CHANNEL_MODE80;
+       case NL80211_CHAN_WIDTH_160:
+               return PHY_VHT_CHANNEL_MODE160;
+       default:
+               WARN(1, "Invalid channel width=%u", chandef->width);
+               return PHY_VHT_CHANNEL_MODE20;
+       }
+}
+
+/*
+ * Maps the driver specific control channel position (relative to the center
+ * freq) definitions to the the fw values
+ */
+u8 iwl_mvm_get_ctrl_pos(struct cfg80211_chan_def *chandef)
+{
+       switch (chandef->chan->center_freq - chandef->center_freq1) {
+       case -70:
+               return PHY_VHT_CTRL_POS_4_BELOW;
+       case -50:
+               return PHY_VHT_CTRL_POS_3_BELOW;
+       case -30:
+               return PHY_VHT_CTRL_POS_2_BELOW;
+       case -10:
+               return PHY_VHT_CTRL_POS_1_BELOW;
+       case  10:
+               return PHY_VHT_CTRL_POS_1_ABOVE;
+       case  30:
+               return PHY_VHT_CTRL_POS_2_ABOVE;
+       case  50:
+               return PHY_VHT_CTRL_POS_3_ABOVE;
+       case  70:
+               return PHY_VHT_CTRL_POS_4_ABOVE;
+       default:
+               WARN(1, "Invalid channel definition");
+       case 0:
+               /*
+                * The FW is expected to check the control channel position only
+                * when in HT/VHT and the channel width is not 20MHz. Return
+                * this value as the default one.
+                */
+               return PHY_VHT_CTRL_POS_1_BELOW;
+       }
+}
+
+/*
+ * Construct the generic fields of the PHY context command
+ */
+static void iwl_mvm_phy_ctxt_cmd_hdr(struct iwl_mvm_phy_ctxt *ctxt,
+                                    struct iwl_phy_context_cmd *cmd,
+                                    u32 action, u32 apply_time)
+{
+       memset(cmd, 0, sizeof(struct iwl_phy_context_cmd));
+
+       cmd->id_and_color = cpu_to_le32(FW_CMD_ID_AND_COLOR(ctxt->id,
+                                                           ctxt->color));
+       cmd->action = cpu_to_le32(action);
+       cmd->apply_time = cpu_to_le32(apply_time);
+}
+
+/*
+ * Add the phy configuration to the PHY context command
+ */
+static void iwl_mvm_phy_ctxt_cmd_data(struct iwl_mvm *mvm,
+                                     struct iwl_phy_context_cmd *cmd,
+                                     struct cfg80211_chan_def *chandef,
+                                     u8 chains_static, u8 chains_dynamic)
+{
+       u8 active_cnt, idle_cnt;
+
+       /* Set the channel info data */
+       cmd->ci.band = (chandef->chan->band == IEEE80211_BAND_2GHZ ?
+             PHY_BAND_24 : PHY_BAND_5);
+
+       cmd->ci.channel = chandef->chan->hw_value;
+       cmd->ci.width = iwl_mvm_get_channel_width(chandef);
+       cmd->ci.ctrl_pos = iwl_mvm_get_ctrl_pos(chandef);
+
+       /* Set rx the chains */
+       idle_cnt = chains_static;
+       active_cnt = chains_dynamic;
+
+       /* In scenarios where we only ever use a single-stream rates,
+        * i.e. legacy 11b/g/a associations, single-stream APs or even
+        * static SMPS, enable both chains to get diversity, improving
+        * the case where we're far enough from the AP that attenuation
+        * between the two antennas is sufficiently different to impact
+        * performance.
+        */
+       if (active_cnt == 1 && iwl_mvm_rx_diversity_allowed(mvm)) {
+               idle_cnt = 2;
+               active_cnt = 2;
+       }
+
+       cmd->rxchain_info = cpu_to_le32(iwl_mvm_get_valid_rx_ant(mvm) <<
+                                       PHY_RX_CHAIN_VALID_POS);
+       cmd->rxchain_info |= cpu_to_le32(idle_cnt << PHY_RX_CHAIN_CNT_POS);
+       cmd->rxchain_info |= cpu_to_le32(active_cnt <<
+                                        PHY_RX_CHAIN_MIMO_CNT_POS);
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+       if (unlikely(mvm->dbgfs_rx_phyinfo))
+               cmd->rxchain_info = cpu_to_le32(mvm->dbgfs_rx_phyinfo);
+#endif
+
+       cmd->txchain_info = cpu_to_le32(iwl_mvm_get_valid_tx_ant(mvm));
+}
+
+/*
+ * Send a command to apply the current phy configuration. The command is send
+ * only if something in the configuration changed: in case that this is the
+ * first time that the phy configuration is applied or in case that the phy
+ * configuration changed from the previous apply.
+ */
+static int iwl_mvm_phy_ctxt_apply(struct iwl_mvm *mvm,
+                                 struct iwl_mvm_phy_ctxt *ctxt,
+                                 struct cfg80211_chan_def *chandef,
+                                 u8 chains_static, u8 chains_dynamic,
+                                 u32 action, u32 apply_time)
+{
+       struct iwl_phy_context_cmd cmd;
+       int ret;
+
+       /* Set the command header fields */
+       iwl_mvm_phy_ctxt_cmd_hdr(ctxt, &cmd, action, apply_time);
+
+       /* Set the command data */
+       iwl_mvm_phy_ctxt_cmd_data(mvm, &cmd, chandef,
+                                 chains_static, chains_dynamic);
+
+       ret = iwl_mvm_send_cmd_pdu(mvm, PHY_CONTEXT_CMD, 0,
+                                  sizeof(struct iwl_phy_context_cmd),
+                                  &cmd);
+       if (ret)
+               IWL_ERR(mvm, "PHY ctxt cmd error. ret=%d\n", ret);
+       return ret;
+}
+
+/*
+ * Send a command to add a PHY context based on the current HW configuration.
+ */
+int iwl_mvm_phy_ctxt_add(struct iwl_mvm *mvm, struct iwl_mvm_phy_ctxt *ctxt,
+                        struct cfg80211_chan_def *chandef,
+                        u8 chains_static, u8 chains_dynamic)
+{
+       WARN_ON(!test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status) &&
+               ctxt->ref);
+       lockdep_assert_held(&mvm->mutex);
+
+       ctxt->channel = chandef->chan;
+
+       return iwl_mvm_phy_ctxt_apply(mvm, ctxt, chandef,
+                                     chains_static, chains_dynamic,
+                                     FW_CTXT_ACTION_ADD, 0);
+}
+
+/*
+ * Update the number of references to the given PHY context. This is valid only
+ * in case the PHY context was already created, i.e., its reference count > 0.
+ */
+void iwl_mvm_phy_ctxt_ref(struct iwl_mvm *mvm, struct iwl_mvm_phy_ctxt *ctxt)
+{
+       lockdep_assert_held(&mvm->mutex);
+       ctxt->ref++;
+}
+
+/*
+ * Send a command to modify the PHY context based on the current HW
+ * configuration. Note that the function does not check that the configuration
+ * changed.
+ */
+int iwl_mvm_phy_ctxt_changed(struct iwl_mvm *mvm, struct iwl_mvm_phy_ctxt *ctxt,
+                            struct cfg80211_chan_def *chandef,
+                            u8 chains_static, u8 chains_dynamic)
+{
+       lockdep_assert_held(&mvm->mutex);
+
+       ctxt->channel = chandef->chan;
+       return iwl_mvm_phy_ctxt_apply(mvm, ctxt, chandef,
+                                     chains_static, chains_dynamic,
+                                     FW_CTXT_ACTION_MODIFY, 0);
+}
+
+void iwl_mvm_phy_ctxt_unref(struct iwl_mvm *mvm, struct iwl_mvm_phy_ctxt *ctxt)
+{
+       lockdep_assert_held(&mvm->mutex);
+
+       if (WARN_ON_ONCE(!ctxt))
+               return;
+
+       ctxt->ref--;
+}
+
+static void iwl_mvm_binding_iterator(void *_data, u8 *mac,
+                                    struct ieee80211_vif *vif)
+{
+       unsigned long *data = _data;
+       struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
+
+       if (!mvmvif->phy_ctxt)
+               return;
+
+       if (vif->type == NL80211_IFTYPE_STATION ||
+           vif->type == NL80211_IFTYPE_AP)
+               __set_bit(mvmvif->phy_ctxt->id, data);
+}
+
+int iwl_mvm_phy_ctx_count(struct iwl_mvm *mvm)
+{
+       unsigned long phy_ctxt_counter = 0;
+
+       ieee80211_iterate_active_interfaces_atomic(mvm->hw,
+                                                  IEEE80211_IFACE_ITER_NORMAL,
+                                                  iwl_mvm_binding_iterator,
+                                                  &phy_ctxt_counter);
+
+       return hweight8(phy_ctxt_counter);
+}