--- /dev/null
+/******************************************************************************
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2014 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called COPYING.
+ *
+ * Contact Information:
+ * Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+#include <linux/etherdevice.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <net/mac80211.h>
+
+#include "iwl-io.h"
+#include "iwl-agn-hw.h"
+#include "iwl-trans.h"
+#include "iwl-modparams.h"
+
+#include "dev.h"
+#include "agn.h"
+
+int iwlagn_hw_valid_rtc_data_addr(u32 addr)
+{
+ return (addr >= IWLAGN_RTC_DATA_LOWER_BOUND) &&
+ (addr < IWLAGN_RTC_DATA_UPPER_BOUND);
+}
+
+int iwlagn_send_tx_power(struct iwl_priv *priv)
+{
+ struct iwlagn_tx_power_dbm_cmd tx_power_cmd;
+ u8 tx_ant_cfg_cmd;
+
+ if (WARN_ONCE(test_bit(STATUS_SCAN_HW, &priv->status),
+ "TX Power requested while scanning!\n"))
+ return -EAGAIN;
+
+ /* half dBm need to multiply */
+ tx_power_cmd.global_lmt = (s8)(2 * priv->tx_power_user_lmt);
+
+ if (tx_power_cmd.global_lmt > priv->nvm_data->max_tx_pwr_half_dbm) {
+ /*
+ * For the newer devices which using enhanced/extend tx power
+ * table in EEPROM, the format is in half dBm. driver need to
+ * convert to dBm format before report to mac80211.
+ * By doing so, there is a possibility of 1/2 dBm resolution
+ * lost. driver will perform "round-up" operation before
+ * reporting, but it will cause 1/2 dBm tx power over the
+ * regulatory limit. Perform the checking here, if the
+ * "tx_power_user_lmt" is higher than EEPROM value (in
+ * half-dBm format), lower the tx power based on EEPROM
+ */
+ tx_power_cmd.global_lmt =
+ priv->nvm_data->max_tx_pwr_half_dbm;
+ }
+ tx_power_cmd.flags = IWLAGN_TX_POWER_NO_CLOSED;
+ tx_power_cmd.srv_chan_lmt = IWLAGN_TX_POWER_AUTO;
+
+ if (IWL_UCODE_API(priv->fw->ucode_ver) == 1)
+ tx_ant_cfg_cmd = REPLY_TX_POWER_DBM_CMD_V1;
+ else
+ tx_ant_cfg_cmd = REPLY_TX_POWER_DBM_CMD;
+
+ return iwl_dvm_send_cmd_pdu(priv, tx_ant_cfg_cmd, 0,
+ sizeof(tx_power_cmd), &tx_power_cmd);
+}
+
+void iwlagn_temperature(struct iwl_priv *priv)
+{
+ lockdep_assert_held(&priv->statistics.lock);
+
+ /* store temperature from correct statistics (in Celsius) */
+ priv->temperature = le32_to_cpu(priv->statistics.common.temperature);
+ iwl_tt_handler(priv);
+}
+
+int iwlagn_hwrate_to_mac80211_idx(u32 rate_n_flags, enum ieee80211_band band)
+{
+ int idx = 0;
+ int band_offset = 0;
+
+ /* HT rate format: mac80211 wants an MCS number, which is just LSB */
+ if (rate_n_flags & RATE_MCS_HT_MSK) {
+ idx = (rate_n_flags & 0xff);
+ return idx;
+ /* Legacy rate format, search for match in table */
+ } else {
+ if (band == IEEE80211_BAND_5GHZ)
+ band_offset = IWL_FIRST_OFDM_RATE;
+ for (idx = band_offset; idx < IWL_RATE_COUNT_LEGACY; idx++)
+ if (iwl_rates[idx].plcp == (rate_n_flags & 0xFF))
+ return idx - band_offset;
+ }
+
+ return -1;
+}
+
+int iwlagn_manage_ibss_station(struct iwl_priv *priv,
+ struct ieee80211_vif *vif, bool add)
+{
+ struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
+
+ if (add)
+ return iwlagn_add_bssid_station(priv, vif_priv->ctx,
+ vif->bss_conf.bssid,
+ &vif_priv->ibss_bssid_sta_id);
+ return iwl_remove_station(priv, vif_priv->ibss_bssid_sta_id,
+ vif->bss_conf.bssid);
+}
+
+/**
+ * iwlagn_txfifo_flush: send REPLY_TXFIFO_FLUSH command to uCode
+ *
+ * pre-requirements:
+ * 1. acquire mutex before calling
+ * 2. make sure rf is on and not in exit state
+ */
+int iwlagn_txfifo_flush(struct iwl_priv *priv, u32 scd_q_msk)
+{
+ struct iwl_txfifo_flush_cmd_v3 flush_cmd_v3 = {
+ .flush_control = cpu_to_le16(IWL_DROP_ALL),
+ };
+ struct iwl_txfifo_flush_cmd_v2 flush_cmd_v2 = {
+ .flush_control = cpu_to_le16(IWL_DROP_ALL),
+ };
+
+ u32 queue_control = IWL_SCD_VO_MSK | IWL_SCD_VI_MSK |
+ IWL_SCD_BE_MSK | IWL_SCD_BK_MSK | IWL_SCD_MGMT_MSK;
+
+ if ((priv->valid_contexts != BIT(IWL_RXON_CTX_BSS)))
+ queue_control |= IWL_PAN_SCD_VO_MSK | IWL_PAN_SCD_VI_MSK |
+ IWL_PAN_SCD_BE_MSK | IWL_PAN_SCD_BK_MSK |
+ IWL_PAN_SCD_MGMT_MSK |
+ IWL_PAN_SCD_MULTICAST_MSK;
+
+ if (priv->nvm_data->sku_cap_11n_enable)
+ queue_control |= IWL_AGG_TX_QUEUE_MSK;
+
+ if (scd_q_msk)
+ queue_control = scd_q_msk;
+
+ IWL_DEBUG_INFO(priv, "queue control: 0x%x\n", queue_control);
+ flush_cmd_v3.queue_control = cpu_to_le32(queue_control);
+ flush_cmd_v2.queue_control = cpu_to_le16((u16)queue_control);
+
+ if (IWL_UCODE_API(priv->fw->ucode_ver) > 2)
+ return iwl_dvm_send_cmd_pdu(priv, REPLY_TXFIFO_FLUSH, 0,
+ sizeof(flush_cmd_v3),
+ &flush_cmd_v3);
+ return iwl_dvm_send_cmd_pdu(priv, REPLY_TXFIFO_FLUSH, 0,
+ sizeof(flush_cmd_v2), &flush_cmd_v2);
+}
+
+void iwlagn_dev_txfifo_flush(struct iwl_priv *priv)
+{
+ mutex_lock(&priv->mutex);
+ ieee80211_stop_queues(priv->hw);
+ if (iwlagn_txfifo_flush(priv, 0)) {
+ IWL_ERR(priv, "flush request fail\n");
+ goto done;
+ }
+ IWL_DEBUG_INFO(priv, "wait transmit/flush all frames\n");
+ iwl_trans_wait_tx_queue_empty(priv->trans, 0xffffffff);
+done:
+ ieee80211_wake_queues(priv->hw);
+ mutex_unlock(&priv->mutex);
+}
+
+/*
+ * BT coex
+ */
+/* Notmal TDM */
+static const __le32 iwlagn_def_3w_lookup[IWLAGN_BT_DECISION_LUT_SIZE] = {
+ cpu_to_le32(0xaaaaaaaa),
+ cpu_to_le32(0xaaaaaaaa),
+ cpu_to_le32(0xaeaaaaaa),
+ cpu_to_le32(0xaaaaaaaa),
+ cpu_to_le32(0xcc00ff28),
+ cpu_to_le32(0x0000aaaa),
+ cpu_to_le32(0xcc00aaaa),
+ cpu_to_le32(0x0000aaaa),
+ cpu_to_le32(0xc0004000),
+ cpu_to_le32(0x00004000),
+ cpu_to_le32(0xf0005000),
+ cpu_to_le32(0xf0005000),
+};
+
+
+/* Loose Coex */
+static const __le32 iwlagn_loose_lookup[IWLAGN_BT_DECISION_LUT_SIZE] = {
+ cpu_to_le32(0xaaaaaaaa),
+ cpu_to_le32(0xaaaaaaaa),
+ cpu_to_le32(0xaeaaaaaa),
+ cpu_to_le32(0xaaaaaaaa),
+ cpu_to_le32(0xcc00ff28),
+ cpu_to_le32(0x0000aaaa),
+ cpu_to_le32(0xcc00aaaa),
+ cpu_to_le32(0x0000aaaa),
+ cpu_to_le32(0x00000000),
+ cpu_to_le32(0x00000000),
+ cpu_to_le32(0xf0005000),
+ cpu_to_le32(0xf0005000),
+};
+
+/* Full concurrency */
+static const __le32 iwlagn_concurrent_lookup[IWLAGN_BT_DECISION_LUT_SIZE] = {
+ cpu_to_le32(0xaaaaaaaa),
+ cpu_to_le32(0xaaaaaaaa),
+ cpu_to_le32(0xaaaaaaaa),
+ cpu_to_le32(0xaaaaaaaa),
+ cpu_to_le32(0xaaaaaaaa),
+ cpu_to_le32(0xaaaaaaaa),
+ cpu_to_le32(0xaaaaaaaa),
+ cpu_to_le32(0xaaaaaaaa),
+ cpu_to_le32(0x00000000),
+ cpu_to_le32(0x00000000),
+ cpu_to_le32(0x00000000),
+ cpu_to_le32(0x00000000),
+};
+
+void iwlagn_send_advance_bt_config(struct iwl_priv *priv)
+{
+ struct iwl_basic_bt_cmd basic = {
+ .max_kill = IWLAGN_BT_MAX_KILL_DEFAULT,
+ .bt3_timer_t7_value = IWLAGN_BT3_T7_DEFAULT,
+ .bt3_prio_sample_time = IWLAGN_BT3_PRIO_SAMPLE_DEFAULT,
+ .bt3_timer_t2_value = IWLAGN_BT3_T2_DEFAULT,
+ };
+ struct iwl_bt_cmd_v1 bt_cmd_v1;
+ struct iwl_bt_cmd_v2 bt_cmd_v2;
+ int ret;
+
+ BUILD_BUG_ON(sizeof(iwlagn_def_3w_lookup) !=
+ sizeof(basic.bt3_lookup_table));
+
+ if (priv->lib->bt_params) {
+ /*
+ * newer generation of devices (2000 series and newer)
+ * use the version 2 of the bt command
+ * we need to make sure sending the host command
+ * with correct data structure to avoid uCode assert
+ */
+ if (priv->lib->bt_params->bt_session_2) {
+ bt_cmd_v2.prio_boost = cpu_to_le32(
+ priv->lib->bt_params->bt_prio_boost);
+ bt_cmd_v2.tx_prio_boost = 0;
+ bt_cmd_v2.rx_prio_boost = 0;
+ } else {
+ /* older version only has 8 bits */
+ WARN_ON(priv->lib->bt_params->bt_prio_boost & ~0xFF);
+ bt_cmd_v1.prio_boost =
+ priv->lib->bt_params->bt_prio_boost;
+ bt_cmd_v1.tx_prio_boost = 0;
+ bt_cmd_v1.rx_prio_boost = 0;
+ }
+ } else {
+ IWL_ERR(priv, "failed to construct BT Coex Config\n");
+ return;
+ }
+
+ /*
+ * Possible situations when BT needs to take over for receive,
+ * at the same time where STA needs to response to AP's frame(s),
+ * reduce the tx power of the required response frames, by that,
+ * allow the concurrent BT receive & WiFi transmit
+ * (BT - ANT A, WiFi -ANT B), without interference to one another
+ *
+ * Reduced tx power apply to control frames only (ACK/Back/CTS)
+ * when indicated by the BT config command
+ */
+ basic.kill_ack_mask = priv->kill_ack_mask;
+ basic.kill_cts_mask = priv->kill_cts_mask;
+ if (priv->reduced_txpower)
+ basic.reduce_txpower = IWLAGN_BT_REDUCED_TX_PWR;
+ basic.valid = priv->bt_valid;
+
+ /*
+ * Configure BT coex mode to "no coexistence" when the
+ * user disabled BT coexistence, we have no interface
+ * (might be in monitor mode), or the interface is in
+ * IBSS mode (no proper uCode support for coex then).
+ */
+ if (!iwlwifi_mod_params.bt_coex_active ||
+ priv->iw_mode == NL80211_IFTYPE_ADHOC) {
+ basic.flags = IWLAGN_BT_FLAG_COEX_MODE_DISABLED;
+ } else {
+ basic.flags = IWLAGN_BT_FLAG_COEX_MODE_3W <<
+ IWLAGN_BT_FLAG_COEX_MODE_SHIFT;
+
+ if (!priv->bt_enable_pspoll)
+ basic.flags |= IWLAGN_BT_FLAG_SYNC_2_BT_DISABLE;
+ else
+ basic.flags &= ~IWLAGN_BT_FLAG_SYNC_2_BT_DISABLE;
+
+ if (priv->bt_ch_announce)
+ basic.flags |= IWLAGN_BT_FLAG_CHANNEL_INHIBITION;
+ IWL_DEBUG_COEX(priv, "BT coex flag: 0X%x\n", basic.flags);
+ }
+ priv->bt_enable_flag = basic.flags;
+ if (priv->bt_full_concurrent)
+ memcpy(basic.bt3_lookup_table, iwlagn_concurrent_lookup,
+ sizeof(iwlagn_concurrent_lookup));
+ else
+ memcpy(basic.bt3_lookup_table, iwlagn_def_3w_lookup,
+ sizeof(iwlagn_def_3w_lookup));
+
+ IWL_DEBUG_COEX(priv, "BT coex %s in %s mode\n",
+ basic.flags ? "active" : "disabled",
+ priv->bt_full_concurrent ?
+ "full concurrency" : "3-wire");
+
+ if (priv->lib->bt_params->bt_session_2) {
+ memcpy(&bt_cmd_v2.basic, &basic,
+ sizeof(basic));
+ ret = iwl_dvm_send_cmd_pdu(priv, REPLY_BT_CONFIG,
+ 0, sizeof(bt_cmd_v2), &bt_cmd_v2);
+ } else {
+ memcpy(&bt_cmd_v1.basic, &basic,
+ sizeof(basic));
+ ret = iwl_dvm_send_cmd_pdu(priv, REPLY_BT_CONFIG,
+ 0, sizeof(bt_cmd_v1), &bt_cmd_v1);
+ }
+ if (ret)
+ IWL_ERR(priv, "failed to send BT Coex Config\n");
+
+}
+
+void iwlagn_bt_adjust_rssi_monitor(struct iwl_priv *priv, bool rssi_ena)
+{
+ struct iwl_rxon_context *ctx, *found_ctx = NULL;
+ bool found_ap = false;
+
+ lockdep_assert_held(&priv->mutex);
+
+ /* Check whether AP or GO mode is active. */
+ if (rssi_ena) {
+ for_each_context(priv, ctx) {
+ if (ctx->vif && ctx->vif->type == NL80211_IFTYPE_AP &&
+ iwl_is_associated_ctx(ctx)) {
+ found_ap = true;
+ break;
+ }
+ }
+ }
+
+ /*
+ * If disable was received or If GO/AP mode, disable RSSI
+ * measurements.
+ */
+ if (!rssi_ena || found_ap) {
+ if (priv->cur_rssi_ctx) {
+ ctx = priv->cur_rssi_ctx;
+ ieee80211_disable_rssi_reports(ctx->vif);
+ priv->cur_rssi_ctx = NULL;
+ }
+ return;
+ }
+
+ /*
+ * If rssi measurements need to be enabled, consider all cases now.
+ * Figure out how many contexts are active.
+ */
+ for_each_context(priv, ctx) {
+ if (ctx->vif && ctx->vif->type == NL80211_IFTYPE_STATION &&
+ iwl_is_associated_ctx(ctx)) {
+ found_ctx = ctx;
+ break;
+ }
+ }
+
+ /*
+ * rssi monitor already enabled for the correct interface...nothing
+ * to do.
+ */
+ if (found_ctx == priv->cur_rssi_ctx)
+ return;
+
+ /*
+ * Figure out if rssi monitor is currently enabled, and needs
+ * to be changed. If rssi monitor is already enabled, disable
+ * it first else just enable rssi measurements on the
+ * interface found above.
+ */
+ if (priv->cur_rssi_ctx) {
+ ctx = priv->cur_rssi_ctx;
+ if (ctx->vif)
+ ieee80211_disable_rssi_reports(ctx->vif);
+ }
+
+ priv->cur_rssi_ctx = found_ctx;
+
+ if (!found_ctx)
+ return;
+
+ ieee80211_enable_rssi_reports(found_ctx->vif,
+ IWLAGN_BT_PSP_MIN_RSSI_THRESHOLD,
+ IWLAGN_BT_PSP_MAX_RSSI_THRESHOLD);
+}
+
+static bool iwlagn_bt_traffic_is_sco(struct iwl_bt_uart_msg *uart_msg)
+{
+ return (BT_UART_MSG_FRAME3SCOESCO_MSK & uart_msg->frame3) >>
+ BT_UART_MSG_FRAME3SCOESCO_POS;
+}
+
+static void iwlagn_bt_traffic_change_work(struct work_struct *work)
+{
+ struct iwl_priv *priv =
+ container_of(work, struct iwl_priv, bt_traffic_change_work);
+ struct iwl_rxon_context *ctx;
+ int smps_request = -1;
+
+ if (priv->bt_enable_flag == IWLAGN_BT_FLAG_COEX_MODE_DISABLED) {
+ /* bt coex disabled */
+ return;
+ }
+
+ /*
+ * Note: bt_traffic_load can be overridden by scan complete and
+ * coex profile notifications. Ignore that since only bad consequence
+ * can be not matching debug print with actual state.
+ */
+ IWL_DEBUG_COEX(priv, "BT traffic load changes: %d\n",
+ priv->bt_traffic_load);
+
+ switch (priv->bt_traffic_load) {
+ case IWL_BT_COEX_TRAFFIC_LOAD_NONE:
+ if (priv->bt_status)
+ smps_request = IEEE80211_SMPS_DYNAMIC;
+ else
+ smps_request = IEEE80211_SMPS_AUTOMATIC;
+ break;
+ case IWL_BT_COEX_TRAFFIC_LOAD_LOW:
+ smps_request = IEEE80211_SMPS_DYNAMIC;
+ break;
+ case IWL_BT_COEX_TRAFFIC_LOAD_HIGH:
+ case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS:
+ smps_request = IEEE80211_SMPS_STATIC;
+ break;
+ default:
+ IWL_ERR(priv, "Invalid BT traffic load: %d\n",
+ priv->bt_traffic_load);
+ break;
+ }
+
+ mutex_lock(&priv->mutex);
+
+ /*
+ * We can not send command to firmware while scanning. When the scan
+ * complete we will schedule this work again. We do check with mutex
+ * locked to prevent new scan request to arrive. We do not check
+ * STATUS_SCANNING to avoid race when queue_work two times from
+ * different notifications, but quit and not perform any work at all.
+ */
+ if (test_bit(STATUS_SCAN_HW, &priv->status))
+ goto out;
+
+ iwl_update_chain_flags(priv);
+
+ if (smps_request != -1) {
+ priv->current_ht_config.smps = smps_request;
+ for_each_context(priv, ctx) {
+ if (ctx->vif && ctx->vif->type == NL80211_IFTYPE_STATION)
+ ieee80211_request_smps(ctx->vif, smps_request);
+ }
+ }
+
+ /*
+ * Dynamic PS poll related functionality. Adjust RSSI measurements if
+ * necessary.
+ */
+ iwlagn_bt_coex_rssi_monitor(priv);
+out:
+ mutex_unlock(&priv->mutex);
+}
+
+/*
+ * If BT sco traffic, and RSSI monitor is enabled, move measurements to the
+ * correct interface or disable it if this is the last interface to be
+ * removed.
+ */
+void iwlagn_bt_coex_rssi_monitor(struct iwl_priv *priv)
+{
+ if (priv->bt_is_sco &&
+ priv->bt_traffic_load == IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS)
+ iwlagn_bt_adjust_rssi_monitor(priv, true);
+ else
+ iwlagn_bt_adjust_rssi_monitor(priv, false);
+}
+
+static void iwlagn_print_uartmsg(struct iwl_priv *priv,
+ struct iwl_bt_uart_msg *uart_msg)
+{
+ IWL_DEBUG_COEX(priv, "Message Type = 0x%X, SSN = 0x%X, "
+ "Update Req = 0x%X\n",
+ (BT_UART_MSG_FRAME1MSGTYPE_MSK & uart_msg->frame1) >>
+ BT_UART_MSG_FRAME1MSGTYPE_POS,
+ (BT_UART_MSG_FRAME1SSN_MSK & uart_msg->frame1) >>
+ BT_UART_MSG_FRAME1SSN_POS,
+ (BT_UART_MSG_FRAME1UPDATEREQ_MSK & uart_msg->frame1) >>
+ BT_UART_MSG_FRAME1UPDATEREQ_POS);
+
+ IWL_DEBUG_COEX(priv, "Open connections = 0x%X, Traffic load = 0x%X, "
+ "Chl_SeqN = 0x%X, In band = 0x%X\n",
+ (BT_UART_MSG_FRAME2OPENCONNECTIONS_MSK & uart_msg->frame2) >>
+ BT_UART_MSG_FRAME2OPENCONNECTIONS_POS,
+ (BT_UART_MSG_FRAME2TRAFFICLOAD_MSK & uart_msg->frame2) >>
+ BT_UART_MSG_FRAME2TRAFFICLOAD_POS,
+ (BT_UART_MSG_FRAME2CHLSEQN_MSK & uart_msg->frame2) >>
+ BT_UART_MSG_FRAME2CHLSEQN_POS,
+ (BT_UART_MSG_FRAME2INBAND_MSK & uart_msg->frame2) >>
+ BT_UART_MSG_FRAME2INBAND_POS);
+
+ IWL_DEBUG_COEX(priv, "SCO/eSCO = 0x%X, Sniff = 0x%X, A2DP = 0x%X, "
+ "ACL = 0x%X, Master = 0x%X, OBEX = 0x%X\n",
+ (BT_UART_MSG_FRAME3SCOESCO_MSK & uart_msg->frame3) >>
+ BT_UART_MSG_FRAME3SCOESCO_POS,
+ (BT_UART_MSG_FRAME3SNIFF_MSK & uart_msg->frame3) >>
+ BT_UART_MSG_FRAME3SNIFF_POS,
+ (BT_UART_MSG_FRAME3A2DP_MSK & uart_msg->frame3) >>
+ BT_UART_MSG_FRAME3A2DP_POS,
+ (BT_UART_MSG_FRAME3ACL_MSK & uart_msg->frame3) >>
+ BT_UART_MSG_FRAME3ACL_POS,
+ (BT_UART_MSG_FRAME3MASTER_MSK & uart_msg->frame3) >>
+ BT_UART_MSG_FRAME3MASTER_POS,
+ (BT_UART_MSG_FRAME3OBEX_MSK & uart_msg->frame3) >>
+ BT_UART_MSG_FRAME3OBEX_POS);
+
+ IWL_DEBUG_COEX(priv, "Idle duration = 0x%X\n",
+ (BT_UART_MSG_FRAME4IDLEDURATION_MSK & uart_msg->frame4) >>
+ BT_UART_MSG_FRAME4IDLEDURATION_POS);
+
+ IWL_DEBUG_COEX(priv, "Tx Activity = 0x%X, Rx Activity = 0x%X, "
+ "eSCO Retransmissions = 0x%X\n",
+ (BT_UART_MSG_FRAME5TXACTIVITY_MSK & uart_msg->frame5) >>
+ BT_UART_MSG_FRAME5TXACTIVITY_POS,
+ (BT_UART_MSG_FRAME5RXACTIVITY_MSK & uart_msg->frame5) >>
+ BT_UART_MSG_FRAME5RXACTIVITY_POS,
+ (BT_UART_MSG_FRAME5ESCORETRANSMIT_MSK & uart_msg->frame5) >>
+ BT_UART_MSG_FRAME5ESCORETRANSMIT_POS);
+
+ IWL_DEBUG_COEX(priv, "Sniff Interval = 0x%X, Discoverable = 0x%X\n",
+ (BT_UART_MSG_FRAME6SNIFFINTERVAL_MSK & uart_msg->frame6) >>
+ BT_UART_MSG_FRAME6SNIFFINTERVAL_POS,
+ (BT_UART_MSG_FRAME6DISCOVERABLE_MSK & uart_msg->frame6) >>
+ BT_UART_MSG_FRAME6DISCOVERABLE_POS);
+
+ IWL_DEBUG_COEX(priv, "Sniff Activity = 0x%X, Page = "
+ "0x%X, Inquiry = 0x%X, Connectable = 0x%X\n",
+ (BT_UART_MSG_FRAME7SNIFFACTIVITY_MSK & uart_msg->frame7) >>
+ BT_UART_MSG_FRAME7SNIFFACTIVITY_POS,
+ (BT_UART_MSG_FRAME7PAGE_MSK & uart_msg->frame7) >>
+ BT_UART_MSG_FRAME7PAGE_POS,
+ (BT_UART_MSG_FRAME7INQUIRY_MSK & uart_msg->frame7) >>
+ BT_UART_MSG_FRAME7INQUIRY_POS,
+ (BT_UART_MSG_FRAME7CONNECTABLE_MSK & uart_msg->frame7) >>
+ BT_UART_MSG_FRAME7CONNECTABLE_POS);
+}
+
+static bool iwlagn_set_kill_msk(struct iwl_priv *priv,
+ struct iwl_bt_uart_msg *uart_msg)
+{
+ bool need_update = false;
+ u8 kill_msk = IWL_BT_KILL_REDUCE;
+ static const __le32 bt_kill_ack_msg[3] = {
+ IWLAGN_BT_KILL_ACK_MASK_DEFAULT,
+ IWLAGN_BT_KILL_ACK_CTS_MASK_SCO,
+ IWLAGN_BT_KILL_ACK_CTS_MASK_REDUCE};
+ static const __le32 bt_kill_cts_msg[3] = {
+ IWLAGN_BT_KILL_CTS_MASK_DEFAULT,
+ IWLAGN_BT_KILL_ACK_CTS_MASK_SCO,
+ IWLAGN_BT_KILL_ACK_CTS_MASK_REDUCE};
+
+ if (!priv->reduced_txpower)
+ kill_msk = (BT_UART_MSG_FRAME3SCOESCO_MSK & uart_msg->frame3)
+ ? IWL_BT_KILL_OVERRIDE : IWL_BT_KILL_DEFAULT;
+ if (priv->kill_ack_mask != bt_kill_ack_msg[kill_msk] ||
+ priv->kill_cts_mask != bt_kill_cts_msg[kill_msk]) {
+ priv->bt_valid |= IWLAGN_BT_VALID_KILL_ACK_MASK;
+ priv->kill_ack_mask = bt_kill_ack_msg[kill_msk];
+ priv->bt_valid |= IWLAGN_BT_VALID_KILL_CTS_MASK;
+ priv->kill_cts_mask = bt_kill_cts_msg[kill_msk];
+ need_update = true;
+ }
+ return need_update;
+}
+
+/*
+ * Upon RSSI changes, sends a bt config command with following changes
+ * 1. enable/disable "reduced control frames tx power
+ * 2. update the "kill)ack_mask" and "kill_cts_mask"
+ *
+ * If "reduced tx power" is enabled, uCode shall
+ * 1. ACK/Back/CTS rate shall reduced to 6Mbps
+ * 2. not use duplciate 20/40MHz mode
+ */
+static bool iwlagn_fill_txpower_mode(struct iwl_priv *priv,
+ struct iwl_bt_uart_msg *uart_msg)
+{
+ bool need_update = false;
+ struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+ int ave_rssi;
+
+ if (!ctx->vif || (ctx->vif->type != NL80211_IFTYPE_STATION)) {
+ IWL_DEBUG_INFO(priv, "BSS ctx not active or not in sta mode\n");
+ return false;
+ }
+
+ ave_rssi = ieee80211_ave_rssi(ctx->vif);
+ if (!ave_rssi) {
+ /* no rssi data, no changes to reduce tx power */
+ IWL_DEBUG_COEX(priv, "no rssi data available\n");
+ return need_update;
+ }
+ if (!priv->reduced_txpower &&
+ !iwl_is_associated(priv, IWL_RXON_CTX_PAN) &&
+ (ave_rssi > BT_ENABLE_REDUCED_TXPOWER_THRESHOLD) &&
+ (uart_msg->frame3 & (BT_UART_MSG_FRAME3ACL_MSK |
+ BT_UART_MSG_FRAME3OBEX_MSK)) &&
+ !(uart_msg->frame3 & (BT_UART_MSG_FRAME3SCOESCO_MSK |
+ BT_UART_MSG_FRAME3SNIFF_MSK | BT_UART_MSG_FRAME3A2DP_MSK))) {
+ /* enabling reduced tx power */
+ priv->reduced_txpower = true;
+ priv->bt_valid |= IWLAGN_BT_VALID_REDUCED_TX_PWR;
+ need_update = true;
+ } else if (priv->reduced_txpower &&
+ (iwl_is_associated(priv, IWL_RXON_CTX_PAN) ||
+ (ave_rssi < BT_DISABLE_REDUCED_TXPOWER_THRESHOLD) ||
+ (uart_msg->frame3 & (BT_UART_MSG_FRAME3SCOESCO_MSK |
+ BT_UART_MSG_FRAME3SNIFF_MSK | BT_UART_MSG_FRAME3A2DP_MSK)) ||
+ !(uart_msg->frame3 & (BT_UART_MSG_FRAME3ACL_MSK |
+ BT_UART_MSG_FRAME3OBEX_MSK)))) {
+ /* disable reduced tx power */
+ priv->reduced_txpower = false;
+ priv->bt_valid |= IWLAGN_BT_VALID_REDUCED_TX_PWR;
+ need_update = true;
+ }
+
+ return need_update;
+}
+
+int iwlagn_bt_coex_profile_notif(struct iwl_priv *priv,
+ struct iwl_rx_cmd_buffer *rxb,
+ struct iwl_device_cmd *cmd)
+{
+ struct iwl_rx_packet *pkt = rxb_addr(rxb);
+ struct iwl_bt_coex_profile_notif *coex = (void *)pkt->data;
+ struct iwl_bt_uart_msg *uart_msg = &coex->last_bt_uart_msg;
+
+ if (priv->bt_enable_flag == IWLAGN_BT_FLAG_COEX_MODE_DISABLED) {
+ /* bt coex disabled */
+ return 0;
+ }
+
+ IWL_DEBUG_COEX(priv, "BT Coex notification:\n");
+ IWL_DEBUG_COEX(priv, " status: %d\n", coex->bt_status);
+ IWL_DEBUG_COEX(priv, " traffic load: %d\n", coex->bt_traffic_load);
+ IWL_DEBUG_COEX(priv, " CI compliance: %d\n",
+ coex->bt_ci_compliance);
+ iwlagn_print_uartmsg(priv, uart_msg);
+
+ priv->last_bt_traffic_load = priv->bt_traffic_load;
+ priv->bt_is_sco = iwlagn_bt_traffic_is_sco(uart_msg);
+
+ if (priv->iw_mode != NL80211_IFTYPE_ADHOC) {
+ if (priv->bt_status != coex->bt_status ||
+ priv->last_bt_traffic_load != coex->bt_traffic_load) {
+ if (coex->bt_status) {
+ /* BT on */
+ if (!priv->bt_ch_announce)
+ priv->bt_traffic_load =
+ IWL_BT_COEX_TRAFFIC_LOAD_HIGH;
+ else
+ priv->bt_traffic_load =
+ coex->bt_traffic_load;
+ } else {
+ /* BT off */
+ priv->bt_traffic_load =
+ IWL_BT_COEX_TRAFFIC_LOAD_NONE;
+ }
+ priv->bt_status = coex->bt_status;
+ queue_work(priv->workqueue,
+ &priv->bt_traffic_change_work);
+ }
+ }
+
+ /* schedule to send runtime bt_config */
+ /* check reduce power before change ack/cts kill mask */
+ if (iwlagn_fill_txpower_mode(priv, uart_msg) ||
+ iwlagn_set_kill_msk(priv, uart_msg))
+ queue_work(priv->workqueue, &priv->bt_runtime_config);
+
+
+ /* FIXME: based on notification, adjust the prio_boost */
+
+ priv->bt_ci_compliance = coex->bt_ci_compliance;
+ return 0;
+}
+
+void iwlagn_bt_rx_handler_setup(struct iwl_priv *priv)
+{
+ priv->rx_handlers[REPLY_BT_COEX_PROFILE_NOTIF] =
+ iwlagn_bt_coex_profile_notif;
+}
+
+void iwlagn_bt_setup_deferred_work(struct iwl_priv *priv)
+{
+ INIT_WORK(&priv->bt_traffic_change_work,
+ iwlagn_bt_traffic_change_work);
+}
+
+void iwlagn_bt_cancel_deferred_work(struct iwl_priv *priv)
+{
+ cancel_work_sync(&priv->bt_traffic_change_work);
+}
+
+static bool is_single_rx_stream(struct iwl_priv *priv)
+{
+ return priv->current_ht_config.smps == IEEE80211_SMPS_STATIC ||
+ priv->current_ht_config.single_chain_sufficient;
+}
+
+#define IWL_NUM_RX_CHAINS_MULTIPLE 3
+#define IWL_NUM_RX_CHAINS_SINGLE 2
+#define IWL_NUM_IDLE_CHAINS_DUAL 2
+#define IWL_NUM_IDLE_CHAINS_SINGLE 1
+
+/*
+ * Determine how many receiver/antenna chains to use.
+ *
+ * More provides better reception via diversity. Fewer saves power
+ * at the expense of throughput, but only when not in powersave to
+ * start with.
+ *
+ * MIMO (dual stream) requires at least 2, but works better with 3.
+ * This does not determine *which* chains to use, just how many.
+ */
+static int iwl_get_active_rx_chain_count(struct iwl_priv *priv)
+{
+ if (priv->lib->bt_params &&
+ priv->lib->bt_params->advanced_bt_coexist &&
+ (priv->bt_full_concurrent ||
+ priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH)) {
+ /*
+ * only use chain 'A' in bt high traffic load or
+ * full concurrency mode
+ */
+ return IWL_NUM_RX_CHAINS_SINGLE;
+ }
+ /* # of Rx chains to use when expecting MIMO. */
+ if (is_single_rx_stream(priv))
+ return IWL_NUM_RX_CHAINS_SINGLE;
+ else
+ return IWL_NUM_RX_CHAINS_MULTIPLE;
+}
+
+/*
+ * When we are in power saving mode, unless device support spatial
+ * multiplexing power save, use the active count for rx chain count.
+ */
+static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt)
+{
+ /* # Rx chains when idling, depending on SMPS mode */
+ switch (priv->current_ht_config.smps) {
+ case IEEE80211_SMPS_STATIC:
+ case IEEE80211_SMPS_DYNAMIC:
+ return IWL_NUM_IDLE_CHAINS_SINGLE;
+ case IEEE80211_SMPS_AUTOMATIC:
+ case IEEE80211_SMPS_OFF:
+ return active_cnt;
+ default:
+ WARN(1, "invalid SMPS mode %d",
+ priv->current_ht_config.smps);
+ return active_cnt;
+ }
+}
+
+/* up to 4 chains */
+static u8 iwl_count_chain_bitmap(u32 chain_bitmap)
+{
+ u8 res;
+ res = (chain_bitmap & BIT(0)) >> 0;
+ res += (chain_bitmap & BIT(1)) >> 1;
+ res += (chain_bitmap & BIT(2)) >> 2;
+ res += (chain_bitmap & BIT(3)) >> 3;
+ return res;
+}
+
+/**
+ * iwlagn_set_rxon_chain - Set up Rx chain usage in "staging" RXON image
+ *
+ * Selects how many and which Rx receivers/antennas/chains to use.
+ * This should not be used for scan command ... it puts data in wrong place.
+ */
+void iwlagn_set_rxon_chain(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
+{
+ bool is_single = is_single_rx_stream(priv);
+ bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
+ u8 idle_rx_cnt, active_rx_cnt, valid_rx_cnt;
+ u32 active_chains;
+ u16 rx_chain;
+
+ /* Tell uCode which antennas are actually connected.
+ * Before first association, we assume all antennas are connected.
+ * Just after first association, iwl_chain_noise_calibration()
+ * checks which antennas actually *are* connected. */
+ if (priv->chain_noise_data.active_chains)
+ active_chains = priv->chain_noise_data.active_chains;
+ else
+ active_chains = priv->nvm_data->valid_rx_ant;
+
+ if (priv->lib->bt_params &&
+ priv->lib->bt_params->advanced_bt_coexist &&
+ (priv->bt_full_concurrent ||
+ priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH)) {
+ /*
+ * only use chain 'A' in bt high traffic load or
+ * full concurrency mode
+ */
+ active_chains = first_antenna(active_chains);
+ }
+
+ rx_chain = active_chains << RXON_RX_CHAIN_VALID_POS;
+
+ /* How many receivers should we use? */
+ active_rx_cnt = iwl_get_active_rx_chain_count(priv);
+ idle_rx_cnt = iwl_get_idle_rx_chain_count(priv, active_rx_cnt);
+
+
+ /* correct rx chain count according hw settings
+ * and chain noise calibration
+ */
+ valid_rx_cnt = iwl_count_chain_bitmap(active_chains);
+ if (valid_rx_cnt < active_rx_cnt)
+ active_rx_cnt = valid_rx_cnt;
+
+ if (valid_rx_cnt < idle_rx_cnt)
+ idle_rx_cnt = valid_rx_cnt;
+
+ rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS;
+ rx_chain |= idle_rx_cnt << RXON_RX_CHAIN_CNT_POS;
+
+ ctx->staging.rx_chain = cpu_to_le16(rx_chain);
+
+ if (!is_single && (active_rx_cnt >= IWL_NUM_RX_CHAINS_SINGLE) && is_cam)
+ ctx->staging.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK;
+ else
+ ctx->staging.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK;
+
+ IWL_DEBUG_ASSOC(priv, "rx_chain=0x%X active=%d idle=%d\n",
+ ctx->staging.rx_chain,
+ active_rx_cnt, idle_rx_cnt);
+
+ WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 ||
+ active_rx_cnt < idle_rx_cnt);
+}
+
+u8 iwl_toggle_tx_ant(struct iwl_priv *priv, u8 ant, u8 valid)
+{
+ int i;
+ u8 ind = ant;
+
+ if (priv->band == IEEE80211_BAND_2GHZ &&
+ priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH)
+ return 0;
+
+ for (i = 0; i < RATE_ANT_NUM - 1; i++) {
+ ind = (ind + 1) < RATE_ANT_NUM ? ind + 1 : 0;
+ if (valid & BIT(ind))
+ return ind;
+ }
+ return ant;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static void iwlagn_convert_p1k(u16 *p1k, __le16 *out)
+{
+ int i;
+
+ for (i = 0; i < IWLAGN_P1K_SIZE; i++)
+ out[i] = cpu_to_le16(p1k[i]);
+}
+
+struct wowlan_key_data {
+ struct iwl_rxon_context *ctx;
+ struct iwlagn_wowlan_rsc_tsc_params_cmd *rsc_tsc;
+ struct iwlagn_wowlan_tkip_params_cmd *tkip;
+ const u8 *bssid;
+ bool error, use_rsc_tsc, use_tkip;
+};
+
+
+static void iwlagn_wowlan_program_keys(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta,
+ struct ieee80211_key_conf *key,
+ void *_data)
+{
+ struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
+ struct wowlan_key_data *data = _data;
+ struct iwl_rxon_context *ctx = data->ctx;
+ struct aes_sc *aes_sc, *aes_tx_sc = NULL;
+ struct tkip_sc *tkip_sc, *tkip_tx_sc = NULL;
+ struct iwlagn_p1k_cache *rx_p1ks;
+ u8 *rx_mic_key;
+ struct ieee80211_key_seq seq;
+ u32 cur_rx_iv32 = 0;
+ u16 p1k[IWLAGN_P1K_SIZE];
+ int ret, i;
+
+ mutex_lock(&priv->mutex);
+
+ if ((key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
+ key->cipher == WLAN_CIPHER_SUITE_WEP104) &&
+ !sta && !ctx->key_mapping_keys)
+ ret = iwl_set_default_wep_key(priv, ctx, key);
+ else
+ ret = iwl_set_dynamic_key(priv, ctx, key, sta);
+
+ if (ret) {
+ IWL_ERR(priv, "Error setting key during suspend!\n");
+ data->error = true;
+ }
+
+ switch (key->cipher) {
+ case WLAN_CIPHER_SUITE_TKIP:
+ if (sta) {
+ tkip_sc = data->rsc_tsc->all_tsc_rsc.tkip.unicast_rsc;
+ tkip_tx_sc = &data->rsc_tsc->all_tsc_rsc.tkip.tsc;
+
+ rx_p1ks = data->tkip->rx_uni;
+
+ ieee80211_get_key_tx_seq(key, &seq);
+ tkip_tx_sc->iv16 = cpu_to_le16(seq.tkip.iv16);
+ tkip_tx_sc->iv32 = cpu_to_le32(seq.tkip.iv32);
+
+ ieee80211_get_tkip_p1k_iv(key, seq.tkip.iv32, p1k);
+ iwlagn_convert_p1k(p1k, data->tkip->tx.p1k);
+
+ memcpy(data->tkip->mic_keys.tx,
+ &key->key[NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY],
+ IWLAGN_MIC_KEY_SIZE);
+
+ rx_mic_key = data->tkip->mic_keys.rx_unicast;
+ } else {
+ tkip_sc =
+ data->rsc_tsc->all_tsc_rsc.tkip.multicast_rsc;
+ rx_p1ks = data->tkip->rx_multi;
+ rx_mic_key = data->tkip->mic_keys.rx_mcast;
+ }
+
+ /*
+ * For non-QoS this relies on the fact that both the uCode and
+ * mac80211 use TID 0 (as they need to to avoid replay attacks)
+ * for checking the IV in the frames.
+ */
+ for (i = 0; i < IWLAGN_NUM_RSC; i++) {
+ ieee80211_get_key_rx_seq(key, i, &seq);
+ tkip_sc[i].iv16 = cpu_to_le16(seq.tkip.iv16);
+ tkip_sc[i].iv32 = cpu_to_le32(seq.tkip.iv32);
+ /* wrapping isn't allowed, AP must rekey */
+ if (seq.tkip.iv32 > cur_rx_iv32)
+ cur_rx_iv32 = seq.tkip.iv32;
+ }
+
+ ieee80211_get_tkip_rx_p1k(key, data->bssid, cur_rx_iv32, p1k);
+ iwlagn_convert_p1k(p1k, rx_p1ks[0].p1k);
+ ieee80211_get_tkip_rx_p1k(key, data->bssid,
+ cur_rx_iv32 + 1, p1k);
+ iwlagn_convert_p1k(p1k, rx_p1ks[1].p1k);
+
+ memcpy(rx_mic_key,
+ &key->key[NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY],
+ IWLAGN_MIC_KEY_SIZE);
+
+ data->use_tkip = true;
+ data->use_rsc_tsc = true;
+ break;
+ case WLAN_CIPHER_SUITE_CCMP:
+ if (sta) {
+ u8 *pn = seq.ccmp.pn;
+
+ aes_sc = data->rsc_tsc->all_tsc_rsc.aes.unicast_rsc;
+ aes_tx_sc = &data->rsc_tsc->all_tsc_rsc.aes.tsc;
+
+ ieee80211_get_key_tx_seq(key, &seq);
+ aes_tx_sc->pn = cpu_to_le64(
+ (u64)pn[5] |
+ ((u64)pn[4] << 8) |
+ ((u64)pn[3] << 16) |
+ ((u64)pn[2] << 24) |
+ ((u64)pn[1] << 32) |
+ ((u64)pn[0] << 40));
+ } else
+ aes_sc = data->rsc_tsc->all_tsc_rsc.aes.multicast_rsc;
+
+ /*
+ * For non-QoS this relies on the fact that both the uCode and
+ * mac80211 use TID 0 for checking the IV in the frames.
+ */
+ for (i = 0; i < IWLAGN_NUM_RSC; i++) {
+ u8 *pn = seq.ccmp.pn;
+
+ ieee80211_get_key_rx_seq(key, i, &seq);
+ aes_sc->pn = cpu_to_le64(
+ (u64)pn[5] |
+ ((u64)pn[4] << 8) |
+ ((u64)pn[3] << 16) |
+ ((u64)pn[2] << 24) |
+ ((u64)pn[1] << 32) |
+ ((u64)pn[0] << 40));
+ }
+ data->use_rsc_tsc = true;
+ break;
+ }
+
+ mutex_unlock(&priv->mutex);
+}
+
+int iwlagn_send_patterns(struct iwl_priv *priv,
+ struct cfg80211_wowlan *wowlan)
+{
+ struct iwlagn_wowlan_patterns_cmd *pattern_cmd;
+ struct iwl_host_cmd cmd = {
+ .id = REPLY_WOWLAN_PATTERNS,
+ .dataflags[0] = IWL_HCMD_DFL_NOCOPY,
+ };
+ int i, err;
+
+ if (!wowlan->n_patterns)
+ return 0;
+
+ cmd.len[0] = sizeof(*pattern_cmd) +
+ wowlan->n_patterns * sizeof(struct iwlagn_wowlan_pattern);
+
+ pattern_cmd = kmalloc(cmd.len[0], GFP_KERNEL);
+ if (!pattern_cmd)
+ return -ENOMEM;
+
+ pattern_cmd->n_patterns = cpu_to_le32(wowlan->n_patterns);
+
+ for (i = 0; i < wowlan->n_patterns; i++) {
+ int mask_len = DIV_ROUND_UP(wowlan->patterns[i].pattern_len, 8);
+
+ memcpy(&pattern_cmd->patterns[i].mask,
+ wowlan->patterns[i].mask, mask_len);
+ memcpy(&pattern_cmd->patterns[i].pattern,
+ wowlan->patterns[i].pattern,
+ wowlan->patterns[i].pattern_len);
+ pattern_cmd->patterns[i].mask_size = mask_len;
+ pattern_cmd->patterns[i].pattern_size =
+ wowlan->patterns[i].pattern_len;
+ }
+
+ cmd.data[0] = pattern_cmd;
+ err = iwl_dvm_send_cmd(priv, &cmd);
+ kfree(pattern_cmd);
+ return err;
+}
+
+int iwlagn_suspend(struct iwl_priv *priv, struct cfg80211_wowlan *wowlan)
+{
+ struct iwlagn_wowlan_wakeup_filter_cmd wakeup_filter_cmd;
+ struct iwl_rxon_cmd rxon;
+ struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+ struct iwlagn_wowlan_kek_kck_material_cmd kek_kck_cmd;
+ struct iwlagn_wowlan_tkip_params_cmd tkip_cmd = {};
+ struct iwlagn_d3_config_cmd d3_cfg_cmd = {
+ /*
+ * Program the minimum sleep time to 10 seconds, as many
+ * platforms have issues processing a wakeup signal while
+ * still being in the process of suspending.
+ */
+ .min_sleep_time = cpu_to_le32(10 * 1000 * 1000),
+ };
+ struct wowlan_key_data key_data = {
+ .ctx = ctx,
+ .bssid = ctx->active.bssid_addr,
+ .use_rsc_tsc = false,
+ .tkip = &tkip_cmd,
+ .use_tkip = false,
+ };
+ int ret, i;
+ u16 seq;
+
+ key_data.rsc_tsc = kzalloc(sizeof(*key_data.rsc_tsc), GFP_KERNEL);
+ if (!key_data.rsc_tsc)
+ return -ENOMEM;
+
+ memset(&wakeup_filter_cmd, 0, sizeof(wakeup_filter_cmd));
+
+ /*
+ * We know the last used seqno, and the uCode expects to know that
+ * one, it will increment before TX.
+ */
+ seq = le16_to_cpu(priv->last_seq_ctl) & IEEE80211_SCTL_SEQ;
+ wakeup_filter_cmd.non_qos_seq = cpu_to_le16(seq);
+
+ /*
+ * For QoS counters, we store the one to use next, so subtract 0x10
+ * since the uCode will add 0x10 before using the value.
+ */
+ for (i = 0; i < IWL_MAX_TID_COUNT; i++) {
+ seq = priv->tid_data[IWL_AP_ID][i].seq_number;
+ seq -= 0x10;
+ wakeup_filter_cmd.qos_seq[i] = cpu_to_le16(seq);
+ }
+
+ if (wowlan->disconnect)
+ wakeup_filter_cmd.enabled |=
+ cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_BEACON_MISS |
+ IWLAGN_WOWLAN_WAKEUP_LINK_CHANGE);
+ if (wowlan->magic_pkt)
+ wakeup_filter_cmd.enabled |=
+ cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_MAGIC_PACKET);
+ if (wowlan->gtk_rekey_failure)
+ wakeup_filter_cmd.enabled |=
+ cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_GTK_REKEY_FAIL);
+ if (wowlan->eap_identity_req)
+ wakeup_filter_cmd.enabled |=
+ cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_EAP_IDENT_REQ);
+ if (wowlan->four_way_handshake)
+ wakeup_filter_cmd.enabled |=
+ cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_4WAY_HANDSHAKE);
+ if (wowlan->n_patterns)
+ wakeup_filter_cmd.enabled |=
+ cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_PATTERN_MATCH);
+
+ if (wowlan->rfkill_release)
+ d3_cfg_cmd.wakeup_flags |=
+ cpu_to_le32(IWLAGN_D3_WAKEUP_RFKILL);
+
+ iwl_scan_cancel_timeout(priv, 200);
+
+ memcpy(&rxon, &ctx->active, sizeof(rxon));
+
+ priv->ucode_loaded = false;
+ iwl_trans_stop_device(priv->trans);
+
+ priv->wowlan = true;
+
+ ret = iwl_load_ucode_wait_alive(priv, IWL_UCODE_WOWLAN);
+ if (ret)
+ goto out;
+
+ /* now configure WoWLAN ucode */
+ ret = iwl_alive_start(priv);
+ if (ret)
+ goto out;
+
+ memcpy(&ctx->staging, &rxon, sizeof(rxon));
+ ret = iwlagn_commit_rxon(priv, ctx);
+ if (ret)
+ goto out;
+
+ ret = iwl_power_update_mode(priv, true);
+ if (ret)
+ goto out;
+
+ if (!iwlwifi_mod_params.sw_crypto) {
+ /* mark all keys clear */
+ priv->ucode_key_table = 0;
+ ctx->key_mapping_keys = 0;
+
+ /*
+ * This needs to be unlocked due to lock ordering
+ * constraints. Since we're in the suspend path
+ * that isn't really a problem though.
+ */
+ mutex_unlock(&priv->mutex);
+ ieee80211_iter_keys(priv->hw, ctx->vif,
+ iwlagn_wowlan_program_keys,
+ &key_data);
+ mutex_lock(&priv->mutex);
+ if (key_data.error) {
+ ret = -EIO;
+ goto out;
+ }
+
+ if (key_data.use_rsc_tsc) {
+ struct iwl_host_cmd rsc_tsc_cmd = {
+ .id = REPLY_WOWLAN_TSC_RSC_PARAMS,
+ .data[0] = key_data.rsc_tsc,
+ .dataflags[0] = IWL_HCMD_DFL_NOCOPY,
+ .len[0] = sizeof(*key_data.rsc_tsc),
+ };
+
+ ret = iwl_dvm_send_cmd(priv, &rsc_tsc_cmd);
+ if (ret)
+ goto out;
+ }
+
+ if (key_data.use_tkip) {
+ ret = iwl_dvm_send_cmd_pdu(priv,
+ REPLY_WOWLAN_TKIP_PARAMS,
+ 0, sizeof(tkip_cmd),
+ &tkip_cmd);
+ if (ret)
+ goto out;
+ }
+
+ if (priv->have_rekey_data) {
+ memset(&kek_kck_cmd, 0, sizeof(kek_kck_cmd));
+ memcpy(kek_kck_cmd.kck, priv->kck, NL80211_KCK_LEN);
+ kek_kck_cmd.kck_len = cpu_to_le16(NL80211_KCK_LEN);
+ memcpy(kek_kck_cmd.kek, priv->kek, NL80211_KEK_LEN);
+ kek_kck_cmd.kek_len = cpu_to_le16(NL80211_KEK_LEN);
+ kek_kck_cmd.replay_ctr = priv->replay_ctr;
+
+ ret = iwl_dvm_send_cmd_pdu(priv,
+ REPLY_WOWLAN_KEK_KCK_MATERIAL,
+ 0, sizeof(kek_kck_cmd),
+ &kek_kck_cmd);
+ if (ret)
+ goto out;
+ }
+ }
+
+ ret = iwl_dvm_send_cmd_pdu(priv, REPLY_D3_CONFIG, 0,
+ sizeof(d3_cfg_cmd), &d3_cfg_cmd);
+ if (ret)
+ goto out;
+
+ ret = iwl_dvm_send_cmd_pdu(priv, REPLY_WOWLAN_WAKEUP_FILTER,
+ 0, sizeof(wakeup_filter_cmd),
+ &wakeup_filter_cmd);
+ if (ret)
+ goto out;
+
+ ret = iwlagn_send_patterns(priv, wowlan);
+ out:
+ kfree(key_data.rsc_tsc);
+ return ret;
+}
+#endif
+
+int iwl_dvm_send_cmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
+{
+ if (iwl_is_rfkill(priv) || iwl_is_ctkill(priv)) {
+ IWL_WARN(priv, "Not sending command - %s KILL\n",
+ iwl_is_rfkill(priv) ? "RF" : "CT");
+ return -EIO;
+ }
+
+ if (test_bit(STATUS_FW_ERROR, &priv->status)) {
+ IWL_ERR(priv, "Command %s failed: FW Error\n",
+ iwl_dvm_get_cmd_string(cmd->id));
+ return -EIO;
+ }
+
+ /*
+ * This can happen upon FW ASSERT: we clear the STATUS_FW_ERROR flag
+ * in iwl_down but cancel the workers only later.
+ */
+ if (!priv->ucode_loaded) {
+ IWL_ERR(priv, "Fw not loaded - dropping CMD: %x\n", cmd->id);
+ return -EIO;
+ }
+
+ /*
+ * Synchronous commands from this op-mode must hold
+ * the mutex, this ensures we don't try to send two
+ * (or more) synchronous commands at a time.
+ */
+ if (!(cmd->flags & CMD_ASYNC))
+ lockdep_assert_held(&priv->mutex);
+
+ return iwl_trans_send_cmd(priv->trans, cmd);
+}
+
+int iwl_dvm_send_cmd_pdu(struct iwl_priv *priv, u8 id,
+ u32 flags, u16 len, const void *data)
+{
+ struct iwl_host_cmd cmd = {
+ .id = id,
+ .len = { len, },
+ .data = { data, },
+ .flags = flags,
+ };
+
+ return iwl_dvm_send_cmd(priv, &cmd);
+}
Code Review / kvmfornfv.git / blobdiff