--- /dev/null
+/*
+ * Copyright (c) 2012 Broadcom Corporation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+
+#ifndef FWIL_TYPES_H_
+#define FWIL_TYPES_H_
+
+#include <linux/if_ether.h>
+
+
+#define BRCMF_FIL_ACTION_FRAME_SIZE 1800
+
+/* ARP Offload feature flags for arp_ol iovar */
+#define BRCMF_ARP_OL_AGENT 0x00000001
+#define BRCMF_ARP_OL_SNOOP 0x00000002
+#define BRCMF_ARP_OL_HOST_AUTO_REPLY 0x00000004
+#define BRCMF_ARP_OL_PEER_AUTO_REPLY 0x00000008
+
+#define BRCMF_BSS_INFO_VERSION 109 /* curr ver of brcmf_bss_info_le struct */
+#define BRCMF_BSS_RSSI_ON_CHANNEL 0x0002
+
+#define BRCMF_STA_ASSOC 0x10 /* Associated */
+
+/* size of brcmf_scan_params not including variable length array */
+#define BRCMF_SCAN_PARAMS_FIXED_SIZE 64
+
+/* masks for channel and ssid count */
+#define BRCMF_SCAN_PARAMS_COUNT_MASK 0x0000ffff
+#define BRCMF_SCAN_PARAMS_NSSID_SHIFT 16
+
+/* primary (ie tx) key */
+#define BRCMF_PRIMARY_KEY (1 << 1)
+#define DOT11_BSSTYPE_ANY 2
+#define BRCMF_ESCAN_REQ_VERSION 1
+
+#define BRCMF_MAXRATES_IN_SET 16 /* max # of rates in rateset */
+
+/* OBSS Coex Auto/On/Off */
+#define BRCMF_OBSS_COEX_AUTO (-1)
+#define BRCMF_OBSS_COEX_OFF 0
+#define BRCMF_OBSS_COEX_ON 1
+
+/* WOWL bits */
+/* Wakeup on Magic packet: */
+#define BRCMF_WOWL_MAGIC (1 << 0)
+/* Wakeup on Netpattern */
+#define BRCMF_WOWL_NET (1 << 1)
+/* Wakeup on loss-of-link due to Disassoc/Deauth: */
+#define BRCMF_WOWL_DIS (1 << 2)
+/* Wakeup on retrograde TSF: */
+#define BRCMF_WOWL_RETR (1 << 3)
+/* Wakeup on loss of beacon: */
+#define BRCMF_WOWL_BCN (1 << 4)
+/* Wakeup after test: */
+#define BRCMF_WOWL_TST (1 << 5)
+/* Wakeup after PTK refresh: */
+#define BRCMF_WOWL_M1 (1 << 6)
+/* Wakeup after receipt of EAP-Identity Req: */
+#define BRCMF_WOWL_EAPID (1 << 7)
+/* Wakeind via PME(0) or GPIO(1): */
+#define BRCMF_WOWL_PME_GPIO (1 << 8)
+/* need tkip phase 1 key to be updated by the driver: */
+#define BRCMF_WOWL_NEEDTKIP1 (1 << 9)
+/* enable wakeup if GTK fails: */
+#define BRCMF_WOWL_GTK_FAILURE (1 << 10)
+/* support extended magic packets: */
+#define BRCMF_WOWL_EXTMAGPAT (1 << 11)
+/* support ARP/NS/keepalive offloading: */
+#define BRCMF_WOWL_ARPOFFLOAD (1 << 12)
+/* read protocol version for EAPOL frames: */
+#define BRCMF_WOWL_WPA2 (1 << 13)
+/* If the bit is set, use key rotaton: */
+#define BRCMF_WOWL_KEYROT (1 << 14)
+/* If the bit is set, frm received was bcast frame: */
+#define BRCMF_WOWL_BCAST (1 << 15)
+/* If the bit is set, scan offload is enabled: */
+#define BRCMF_WOWL_SCANOL (1 << 16)
+/* Wakeup on tcpkeep alive timeout: */
+#define BRCMF_WOWL_TCPKEEP_TIME (1 << 17)
+/* Wakeup on mDNS Conflict Resolution: */
+#define BRCMF_WOWL_MDNS_CONFLICT (1 << 18)
+/* Wakeup on mDNS Service Connect: */
+#define BRCMF_WOWL_MDNS_SERVICE (1 << 19)
+/* tcp keepalive got data: */
+#define BRCMF_WOWL_TCPKEEP_DATA (1 << 20)
+/* Firmware died in wowl mode: */
+#define BRCMF_WOWL_FW_HALT (1 << 21)
+/* Enable detection of radio button changes: */
+#define BRCMF_WOWL_ENAB_HWRADIO (1 << 22)
+/* Offloads detected MIC failure(s): */
+#define BRCMF_WOWL_MIC_FAIL (1 << 23)
+/* Wakeup in Unassociated state (Net/Magic Pattern): */
+#define BRCMF_WOWL_UNASSOC (1 << 24)
+/* Wakeup if received matched secured pattern: */
+#define BRCMF_WOWL_SECURE (1 << 25)
+/* Link Down indication in WoWL mode: */
+#define BRCMF_WOWL_LINKDOWN (1 << 31)
+
+#define BRCMF_WOWL_MAXPATTERNS 8
+#define BRCMF_WOWL_MAXPATTERNSIZE 128
+
+#define BRCMF_COUNTRY_BUF_SZ 4
+
+/* join preference types for join_pref iovar */
+enum brcmf_join_pref_types {
+ BRCMF_JOIN_PREF_RSSI = 1,
+ BRCMF_JOIN_PREF_WPA,
+ BRCMF_JOIN_PREF_BAND,
+ BRCMF_JOIN_PREF_RSSI_DELTA,
+};
+
+enum brcmf_fil_p2p_if_types {
+ BRCMF_FIL_P2P_IF_CLIENT,
+ BRCMF_FIL_P2P_IF_GO,
+ BRCMF_FIL_P2P_IF_DYNBCN_GO,
+ BRCMF_FIL_P2P_IF_DEV,
+};
+
+enum brcmf_wowl_pattern_type {
+ BRCMF_WOWL_PATTERN_TYPE_BITMAP = 0,
+ BRCMF_WOWL_PATTERN_TYPE_ARP,
+ BRCMF_WOWL_PATTERN_TYPE_NA
+};
+
+struct brcmf_fil_p2p_if_le {
+ u8 addr[ETH_ALEN];
+ __le16 type;
+ __le16 chspec;
+};
+
+struct brcmf_fil_chan_info_le {
+ __le32 hw_channel;
+ __le32 target_channel;
+ __le32 scan_channel;
+};
+
+struct brcmf_fil_action_frame_le {
+ u8 da[ETH_ALEN];
+ __le16 len;
+ __le32 packet_id;
+ u8 data[BRCMF_FIL_ACTION_FRAME_SIZE];
+};
+
+struct brcmf_fil_af_params_le {
+ __le32 channel;
+ __le32 dwell_time;
+ u8 bssid[ETH_ALEN];
+ u8 pad[2];
+ struct brcmf_fil_action_frame_le action_frame;
+};
+
+struct brcmf_fil_bss_enable_le {
+ __le32 bsscfg_idx;
+ __le32 enable;
+};
+
+struct brcmf_fil_bwcap_le {
+ __le32 band;
+ __le32 bw_cap;
+};
+
+/**
+ * struct tdls_iovar - common structure for tdls iovars.
+ *
+ * @ea: ether address of peer station.
+ * @mode: mode value depending on specific tdls iovar.
+ * @chanspec: channel specification.
+ * @pad: unused (for future use).
+ */
+struct brcmf_tdls_iovar_le {
+ u8 ea[ETH_ALEN]; /* Station address */
+ u8 mode; /* mode: depends on iovar */
+ __le16 chanspec;
+ __le32 pad; /* future */
+};
+
+enum brcmf_tdls_manual_ep_ops {
+ BRCMF_TDLS_MANUAL_EP_CREATE = 1,
+ BRCMF_TDLS_MANUAL_EP_DELETE = 3,
+ BRCMF_TDLS_MANUAL_EP_DISCOVERY = 6
+};
+
+/* Pattern matching filter. Specifies an offset within received packets to
+ * start matching, the pattern to match, the size of the pattern, and a bitmask
+ * that indicates which bits within the pattern should be matched.
+ */
+struct brcmf_pkt_filter_pattern_le {
+ /*
+ * Offset within received packet to start pattern matching.
+ * Offset '0' is the first byte of the ethernet header.
+ */
+ __le32 offset;
+ /* Size of the pattern. Bitmask must be the same size.*/
+ __le32 size_bytes;
+ /*
+ * Variable length mask and pattern data. mask starts at offset 0.
+ * Pattern immediately follows mask.
+ */
+ u8 mask_and_pattern[1];
+};
+
+/* IOVAR "pkt_filter_add" parameter. Used to install packet filters. */
+struct brcmf_pkt_filter_le {
+ __le32 id; /* Unique filter id, specified by app. */
+ __le32 type; /* Filter type (WL_PKT_FILTER_TYPE_xxx). */
+ __le32 negate_match; /* Negate the result of filter matches */
+ union { /* Filter definitions */
+ struct brcmf_pkt_filter_pattern_le pattern; /* Filter pattern */
+ } u;
+};
+
+/* IOVAR "pkt_filter_enable" parameter. */
+struct brcmf_pkt_filter_enable_le {
+ __le32 id; /* Unique filter id */
+ __le32 enable; /* Enable/disable bool */
+};
+
+/* BSS info structure
+ * Applications MUST CHECK ie_offset field and length field to access IEs and
+ * next bss_info structure in a vector (in struct brcmf_scan_results)
+ */
+struct brcmf_bss_info_le {
+ __le32 version; /* version field */
+ __le32 length; /* byte length of data in this record,
+ * starting at version and including IEs
+ */
+ u8 BSSID[ETH_ALEN];
+ __le16 beacon_period; /* units are Kusec */
+ __le16 capability; /* Capability information */
+ u8 SSID_len;
+ u8 SSID[32];
+ struct {
+ __le32 count; /* # rates in this set */
+ u8 rates[16]; /* rates in 500kbps units w/hi bit set if basic */
+ } rateset; /* supported rates */
+ __le16 chanspec; /* chanspec for bss */
+ __le16 atim_window; /* units are Kusec */
+ u8 dtim_period; /* DTIM period */
+ __le16 RSSI; /* receive signal strength (in dBm) */
+ s8 phy_noise; /* noise (in dBm) */
+
+ u8 n_cap; /* BSS is 802.11N Capable */
+ /* 802.11N BSS Capabilities (based on HT_CAP_*): */
+ __le32 nbss_cap;
+ u8 ctl_ch; /* 802.11N BSS control channel number */
+ __le32 reserved32[1]; /* Reserved for expansion of BSS properties */
+ u8 flags; /* flags */
+ u8 reserved[3]; /* Reserved for expansion of BSS properties */
+ u8 basic_mcs[MCSSET_LEN]; /* 802.11N BSS required MCS set */
+
+ __le16 ie_offset; /* offset at which IEs start, from beginning */
+ __le32 ie_length; /* byte length of Information Elements */
+ __le16 SNR; /* average SNR of during frame reception */
+ /* Add new fields here */
+ /* variable length Information Elements */
+};
+
+struct brcm_rateset_le {
+ /* # rates in this set */
+ __le32 count;
+ /* rates in 500kbps units w/hi bit set if basic */
+ u8 rates[BRCMF_MAXRATES_IN_SET];
+};
+
+struct brcmf_ssid {
+ u32 SSID_len;
+ unsigned char SSID[32];
+};
+
+struct brcmf_ssid_le {
+ __le32 SSID_len;
+ unsigned char SSID[32];
+};
+
+struct brcmf_scan_params_le {
+ struct brcmf_ssid_le ssid_le; /* default: {0, ""} */
+ u8 bssid[ETH_ALEN]; /* default: bcast */
+ s8 bss_type; /* default: any,
+ * DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT
+ */
+ u8 scan_type; /* flags, 0 use default */
+ __le32 nprobes; /* -1 use default, number of probes per channel */
+ __le32 active_time; /* -1 use default, dwell time per channel for
+ * active scanning
+ */
+ __le32 passive_time; /* -1 use default, dwell time per channel
+ * for passive scanning
+ */
+ __le32 home_time; /* -1 use default, dwell time for the
+ * home channel between channel scans
+ */
+ __le32 channel_num; /* count of channels and ssids that follow
+ *
+ * low half is count of channels in
+ * channel_list, 0 means default (use all
+ * available channels)
+ *
+ * high half is entries in struct brcmf_ssid
+ * array that follows channel_list, aligned for
+ * s32 (4 bytes) meaning an odd channel count
+ * implies a 2-byte pad between end of
+ * channel_list and first ssid
+ *
+ * if ssid count is zero, single ssid in the
+ * fixed parameter portion is assumed, otherwise
+ * ssid in the fixed portion is ignored
+ */
+ __le16 channel_list[1]; /* list of chanspecs */
+};
+
+struct brcmf_scan_results {
+ u32 buflen;
+ u32 version;
+ u32 count;
+ struct brcmf_bss_info_le bss_info_le[];
+};
+
+struct brcmf_escan_params_le {
+ __le32 version;
+ __le16 action;
+ __le16 sync_id;
+ struct brcmf_scan_params_le params_le;
+};
+
+struct brcmf_escan_result_le {
+ __le32 buflen;
+ __le32 version;
+ __le16 sync_id;
+ __le16 bss_count;
+ struct brcmf_bss_info_le bss_info_le;
+};
+
+#define WL_ESCAN_RESULTS_FIXED_SIZE (sizeof(struct brcmf_escan_result_le) - \
+ sizeof(struct brcmf_bss_info_le))
+
+/* used for association with a specific BSSID and chanspec list */
+struct brcmf_assoc_params_le {
+ /* 00:00:00:00:00:00: broadcast scan */
+ u8 bssid[ETH_ALEN];
+ /* 0: all available channels, otherwise count of chanspecs in
+ * chanspec_list */
+ __le32 chanspec_num;
+ /* list of chanspecs */
+ __le16 chanspec_list[1];
+};
+
+/**
+ * struct join_pref params - parameters for preferred join selection.
+ *
+ * @type: preference type (see enum brcmf_join_pref_types).
+ * @len: length of bytes following (currently always 2).
+ * @rssi_gain: signal gain for selection (only when @type is RSSI_DELTA).
+ * @band: band to which selection preference applies.
+ * This is used if @type is BAND or RSSI_DELTA.
+ */
+struct brcmf_join_pref_params {
+ u8 type;
+ u8 len;
+ u8 rssi_gain;
+ u8 band;
+};
+
+/* used for join with or without a specific bssid and channel list */
+struct brcmf_join_params {
+ struct brcmf_ssid_le ssid_le;
+ struct brcmf_assoc_params_le params_le;
+};
+
+/* scan params for extended join */
+struct brcmf_join_scan_params_le {
+ u8 scan_type; /* 0 use default, active or passive scan */
+ __le32 nprobes; /* -1 use default, nr of probes per channel */
+ __le32 active_time; /* -1 use default, dwell time per channel for
+ * active scanning
+ */
+ __le32 passive_time; /* -1 use default, dwell time per channel
+ * for passive scanning
+ */
+ __le32 home_time; /* -1 use default, dwell time for the home
+ * channel between channel scans
+ */
+};
+
+/* extended join params */
+struct brcmf_ext_join_params_le {
+ struct brcmf_ssid_le ssid_le; /* {0, ""}: wildcard scan */
+ struct brcmf_join_scan_params_le scan_le;
+ struct brcmf_assoc_params_le assoc_le;
+};
+
+struct brcmf_wsec_key {
+ u32 index; /* key index */
+ u32 len; /* key length */
+ u8 data[WLAN_MAX_KEY_LEN]; /* key data */
+ u32 pad_1[18];
+ u32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
+ u32 flags; /* misc flags */
+ u32 pad_2[3];
+ u32 iv_initialized; /* has IV been initialized already? */
+ u32 pad_3;
+ /* Rx IV */
+ struct {
+ u32 hi; /* upper 32 bits of IV */
+ u16 lo; /* lower 16 bits of IV */
+ } rxiv;
+ u32 pad_4[2];
+ u8 ea[ETH_ALEN]; /* per station */
+};
+
+/*
+ * dongle requires same struct as above but with fields in little endian order
+ */
+struct brcmf_wsec_key_le {
+ __le32 index; /* key index */
+ __le32 len; /* key length */
+ u8 data[WLAN_MAX_KEY_LEN]; /* key data */
+ __le32 pad_1[18];
+ __le32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
+ __le32 flags; /* misc flags */
+ __le32 pad_2[3];
+ __le32 iv_initialized; /* has IV been initialized already? */
+ __le32 pad_3;
+ /* Rx IV */
+ struct {
+ __le32 hi; /* upper 32 bits of IV */
+ __le16 lo; /* lower 16 bits of IV */
+ } rxiv;
+ __le32 pad_4[2];
+ u8 ea[ETH_ALEN]; /* per station */
+};
+
+/* Used to get specific STA parameters */
+struct brcmf_scb_val_le {
+ __le32 val;
+ u8 ea[ETH_ALEN];
+};
+
+/* channel encoding */
+struct brcmf_channel_info_le {
+ __le32 hw_channel;
+ __le32 target_channel;
+ __le32 scan_channel;
+};
+
+struct brcmf_sta_info_le {
+ __le16 ver; /* version of this struct */
+ __le16 len; /* length in bytes of this structure */
+ __le16 cap; /* sta's advertised capabilities */
+ __le32 flags; /* flags defined below */
+ __le32 idle; /* time since data pkt rx'd from sta */
+ u8 ea[ETH_ALEN]; /* Station address */
+ __le32 count; /* # rates in this set */
+ u8 rates[BRCMF_MAXRATES_IN_SET]; /* rates in 500kbps units */
+ /* w/hi bit set if basic */
+ __le32 in; /* seconds elapsed since associated */
+ __le32 listen_interval_inms; /* Min Listen interval in ms for STA */
+ __le32 tx_pkts; /* # of packets transmitted */
+ __le32 tx_failures; /* # of packets failed */
+ __le32 rx_ucast_pkts; /* # of unicast packets received */
+ __le32 rx_mcast_pkts; /* # of multicast packets received */
+ __le32 tx_rate; /* Rate of last successful tx frame */
+ __le32 rx_rate; /* Rate of last successful rx frame */
+ __le32 rx_decrypt_succeeds; /* # of packet decrypted successfully */
+ __le32 rx_decrypt_failures; /* # of packet decrypted failed */
+};
+
+struct brcmf_chanspec_list {
+ __le32 count; /* # of entries */
+ __le32 element[1]; /* variable length uint32 list */
+};
+
+/*
+ * WLC_E_PROBRESP_MSG
+ * WLC_E_P2P_PROBREQ_MSG
+ * WLC_E_ACTION_FRAME_RX
+ */
+struct brcmf_rx_mgmt_data {
+ __be16 version;
+ __be16 chanspec;
+ __be32 rssi;
+ __be32 mactime;
+ __be32 rate;
+};
+
+/**
+ * struct brcmf_fil_wowl_pattern_le - wowl pattern configuration struct.
+ *
+ * @cmd: "add", "del" or "clr".
+ * @masksize: Size of the mask in #of bytes
+ * @offset: Pattern byte offset in packet
+ * @patternoffset: Offset of start of pattern. Starting from field masksize.
+ * @patternsize: Size of the pattern itself in #of bytes
+ * @id: id
+ * @reasonsize: Size of the wakeup reason code
+ * @type: Type of pattern (enum brcmf_wowl_pattern_type)
+ */
+struct brcmf_fil_wowl_pattern_le {
+ u8 cmd[4];
+ __le32 masksize;
+ __le32 offset;
+ __le32 patternoffset;
+ __le32 patternsize;
+ __le32 id;
+ __le32 reasonsize;
+ __le32 type;
+ /* u8 mask[] - Mask follows the structure above */
+ /* u8 pattern[] - Pattern follows the mask is at 'patternoffset' */
+};
+
+struct brcmf_mbss_ssid_le {
+ __le32 bsscfgidx;
+ __le32 SSID_len;
+ unsigned char SSID[32];
+};
+
+/**
+ * struct brcmf_fil_country_le - country configuration structure.
+ *
+ * @country_abbrev: null-terminated country code used in the country IE.
+ * @rev: revision specifier for ccode. on set, -1 indicates unspecified.
+ * @ccode: null-terminated built-in country code.
+ */
+struct brcmf_fil_country_le {
+ char country_abbrev[BRCMF_COUNTRY_BUF_SZ];
+ __le32 rev;
+ char ccode[BRCMF_COUNTRY_BUF_SZ];
+};
+
+/**
+ * struct brcmf_rev_info_le - device revision info.
+ *
+ * @vendorid: PCI vendor id.
+ * @deviceid: device id of chip.
+ * @radiorev: radio revision.
+ * @chiprev: chip revision.
+ * @corerev: core revision.
+ * @boardid: board identifier (usu. PCI sub-device id).
+ * @boardvendor: board vendor (usu. PCI sub-vendor id).
+ * @boardrev: board revision.
+ * @driverrev: driver version.
+ * @ucoderev: microcode version.
+ * @bus: bus type.
+ * @chipnum: chip number.
+ * @phytype: phy type.
+ * @phyrev: phy revision.
+ * @anarev: anacore rev.
+ * @chippkg: chip package info.
+ * @nvramrev: nvram revision number.
+ */
+struct brcmf_rev_info_le {
+ __le32 vendorid;
+ __le32 deviceid;
+ __le32 radiorev;
+ __le32 chiprev;
+ __le32 corerev;
+ __le32 boardid;
+ __le32 boardvendor;
+ __le32 boardrev;
+ __le32 driverrev;
+ __le32 ucoderev;
+ __le32 bus;
+ __le32 chipnum;
+ __le32 phytype;
+ __le32 phyrev;
+ __le32 anarev;
+ __le32 chippkg;
+ __le32 nvramrev;
+};
+
+#endif /* FWIL_TYPES_H_ */
Code Review / kvmfornfv.git / blobdiff