--- /dev/null
+config B43
+ tristate "Broadcom 43xx wireless support (mac80211 stack)"
+ depends on (BCMA_POSSIBLE || SSB_POSSIBLE) && MAC80211 && HAS_DMA
+ select BCMA if B43_BCMA
+ select SSB if B43_SSB
+ select FW_LOADER
+ ---help---
+ b43 is a driver for the Broadcom 43xx series wireless devices.
+
+ Check "lspci" for something like
+ "Broadcom Corporation BCM43XX 802.11 Wireless LAN Controller"
+ to determine whether you own such a device.
+
+ This driver supports the new BCM43xx IEEE 802.11G devices, but not
+ the old IEEE 802.11B devices. Old devices are supported by
+ the b43legacy driver.
+ Note that this has nothing to do with the standard that your AccessPoint
+ supports (A, B, G or a combination).
+ IEEE 802.11G devices can talk to IEEE 802.11B AccessPoints.
+
+ It is safe to include both b43 and b43legacy as the underlying glue
+ layer will automatically load the correct version for your device.
+
+ This driver uses V4 firmware, which must be installed separately using
+ b43-fwcutter.
+
+ This driver can be built as a module (recommended) that will be called "b43".
+ If unsure, say M.
+
+config B43_BCMA
+ bool
+
+config B43_SSB
+ bool
+
+choice
+ prompt "Supported bus types"
+ depends on B43
+ default B43_BUSES_BCMA_AND_SSB
+
+config B43_BUSES_BCMA_AND_SSB
+ bool "BCMA and SSB"
+ depends on BCMA_POSSIBLE && SSB_POSSIBLE
+ select B43_BCMA
+ select B43_SSB
+
+config B43_BUSES_BCMA
+ bool "BCMA only"
+ depends on BCMA_POSSIBLE
+ select B43_BCMA
+
+config B43_BUSES_SSB
+ bool "SSB only"
+ depends on SSB_POSSIBLE
+ select B43_SSB
+
+endchoice
+
+# Auto-select SSB PCI-HOST support, if possible
+config B43_PCI_AUTOSELECT
+ bool
+ depends on B43 && SSB_PCIHOST_POSSIBLE
+ select SSB_PCIHOST
+ select SSB_B43_PCI_BRIDGE
+ default y
+
+# Auto-select SSB PCICORE driver, if possible
+config B43_PCICORE_AUTOSELECT
+ bool
+ depends on B43 && SSB_DRIVER_PCICORE_POSSIBLE
+ select SSB_DRIVER_PCICORE
+ default y
+
+config B43_PCMCIA
+ bool "Broadcom 43xx PCMCIA device support"
+ depends on B43 && B43_SSB && SSB_PCMCIAHOST_POSSIBLE
+ select SSB_PCMCIAHOST
+ ---help---
+ Broadcom 43xx PCMCIA device support.
+
+ Support for 16bit PCMCIA devices.
+ Please note that most PC-CARD devices are _NOT_ 16bit PCMCIA
+ devices, but 32bit CardBUS devices. CardBUS devices are supported
+ out of the box by b43.
+
+ With this config option you can drive b43 cards in
+ CompactFlash formfactor in a PCMCIA adaptor.
+ CF b43 cards can sometimes be found in handheld PCs.
+
+ It's safe to select Y here, even if you don't have a B43 PCMCIA device.
+
+ If unsure, say N.
+
+config B43_SDIO
+ bool "Broadcom 43xx SDIO device support"
+ depends on B43 && B43_SSB && SSB_SDIOHOST_POSSIBLE
+ select SSB_SDIOHOST
+ ---help---
+ Broadcom 43xx device support for Soft-MAC SDIO devices.
+
+ With this config option you can drive Soft-MAC b43 cards with a
+ Secure Digital I/O interface.
+ This includes the WLAN daughter card found on the Nintendo Wii
+ video game console.
+ Note that this does not support Broadcom 43xx Full-MAC devices.
+
+ It's safe to select Y here, even if you don't have a B43 SDIO device.
+
+ If unsure, say N.
+
+#Data transfers to the device via PIO. We want it as a fallback even
+# if we can do DMA.
+config B43_BCMA_PIO
+ bool
+ depends on B43 && B43_BCMA
+ select BCMA_BLOCKIO
+ default y
+
+config B43_PIO
+ bool
+ depends on B43 && B43_SSB
+ select SSB_BLOCKIO
+ default y
+
+config B43_PHY_G
+ bool "Support for G-PHY (802.11g) devices"
+ depends on B43 && B43_SSB
+ default y
+ ---help---
+ This PHY type can be found in the following chipsets:
+ PCI: BCM4306, BCM4311, BCM4318
+ SoC: BCM4712, BCM5352E
+
+config B43_PHY_N
+ bool "Support for N-PHY (the main 802.11n series) devices"
+ depends on B43
+ default y
+ ---help---
+ This PHY type can be found in the following chipsets:
+ PCI: BCM4321, BCM4322,
+ BCM43222, BCM43224, BCM43225,
+ BCM43131, BCM43217, BCM43227, BCM43228
+ SoC: BCM4716, BCM4717, BCM4718, BCM5356, BCM5357, BCM5358
+
+config B43_PHY_LP
+ bool "Support for LP-PHY (low-power 802.11g) devices"
+ depends on B43 && B43_SSB
+ default y
+ ---help---
+ The LP-PHY is a low-power PHY built into some notebooks
+ and embedded devices. It supports 802.11a/b/g
+ (802.11a support is optional, and currently disabled).
+
+config B43_PHY_HT
+ bool "Support for HT-PHY (high throughput 802.11n) devices"
+ depends on B43 && B43_BCMA
+ default y
+ ---help---
+ This PHY type with 3x3:3 MIMO can be found in the BCM4331 PCI chipset.
+
+config B43_PHY_LCN
+ bool "Support for LCN-PHY devices (BROKEN)"
+ depends on B43 && BROKEN
+ ---help---
+ Support for the LCN-PHY.
+
+ Say N, this is BROKEN and crashes driver.
+
+config B43_PHY_AC
+ bool "Support for AC-PHY (802.11ac) devices (BROKEN)"
+ depends on B43 && B43_BCMA && BROKEN
+ ---help---
+ This PHY type can be found in the following chipsets:
+ PCI: BCM4352, BCM4360
+
+ Say N, this is BROKEN and crashes driver.
+
+# This config option automatically enables b43 LEDS support,
+# if it's possible.
+config B43_LEDS
+ bool
+ depends on B43 && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = B43)
+ default y
+
+# This config option automatically enables b43 HW-RNG support,
+# if the HW-RNG core is enabled.
+config B43_HWRNG
+ bool
+ depends on B43 && (HW_RANDOM = y || HW_RANDOM = B43)
+ default y
+
+config B43_DEBUG
+ bool "Broadcom 43xx debugging"
+ depends on B43
+ ---help---
+ Broadcom 43xx debugging.
+
+ This adds additional runtime sanity checks and statistics to the driver.
+ These checks and statistics might be expensive and hurt the runtime
+ performance of your system.
+ This also adds the b43 debugfs interface.
+
+ Do not enable this, unless you are debugging the driver.
+
+ Say N, if you are a distributor or user building a release kernel
+ for production use.
+ Only say Y, if you are debugging a problem in the b43 driver sourcecode.
Code Review / kvmfornfv.git / blobdiff