--- /dev/null
+/*
+ * Copyright (c) 2005-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "mac.h"
+
+#include <net/mac80211.h>
+#include <linux/etherdevice.h>
+
+#include "hif.h"
+#include "core.h"
+#include "debug.h"
+#include "wmi.h"
+#include "htt.h"
+#include "txrx.h"
+#include "testmode.h"
+#include "wmi.h"
+#include "wmi-ops.h"
+
+/**********/
+/* Crypto */
+/**********/
+
+static int ath10k_send_key(struct ath10k_vif *arvif,
+ struct ieee80211_key_conf *key,
+ enum set_key_cmd cmd,
+ const u8 *macaddr, bool def_idx)
+{
+ struct ath10k *ar = arvif->ar;
+ struct wmi_vdev_install_key_arg arg = {
+ .vdev_id = arvif->vdev_id,
+ .key_idx = key->keyidx,
+ .key_len = key->keylen,
+ .key_data = key->key,
+ .macaddr = macaddr,
+ };
+
+ lockdep_assert_held(&arvif->ar->conf_mutex);
+
+ if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE)
+ arg.key_flags = WMI_KEY_PAIRWISE;
+ else
+ arg.key_flags = WMI_KEY_GROUP;
+
+ switch (key->cipher) {
+ case WLAN_CIPHER_SUITE_CCMP:
+ arg.key_cipher = WMI_CIPHER_AES_CCM;
+ key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV_MGMT;
+ break;
+ case WLAN_CIPHER_SUITE_TKIP:
+ arg.key_cipher = WMI_CIPHER_TKIP;
+ arg.key_txmic_len = 8;
+ arg.key_rxmic_len = 8;
+ break;
+ case WLAN_CIPHER_SUITE_WEP40:
+ case WLAN_CIPHER_SUITE_WEP104:
+ arg.key_cipher = WMI_CIPHER_WEP;
+ /* AP/IBSS mode requires self-key to be groupwise
+ * Otherwise pairwise key must be set */
+ if (memcmp(macaddr, arvif->vif->addr, ETH_ALEN))
+ arg.key_flags = WMI_KEY_PAIRWISE;
+
+ if (def_idx)
+ arg.key_flags |= WMI_KEY_TX_USAGE;
+ break;
+ case WLAN_CIPHER_SUITE_AES_CMAC:
+ /* this one needs to be done in software */
+ return 1;
+ default:
+ ath10k_warn(ar, "cipher %d is not supported\n", key->cipher);
+ return -EOPNOTSUPP;
+ }
+
+ if (cmd == DISABLE_KEY) {
+ arg.key_cipher = WMI_CIPHER_NONE;
+ arg.key_data = NULL;
+ }
+
+ return ath10k_wmi_vdev_install_key(arvif->ar, &arg);
+}
+
+static int ath10k_install_key(struct ath10k_vif *arvif,
+ struct ieee80211_key_conf *key,
+ enum set_key_cmd cmd,
+ const u8 *macaddr, bool def_idx)
+{
+ struct ath10k *ar = arvif->ar;
+ int ret;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ reinit_completion(&ar->install_key_done);
+
+ ret = ath10k_send_key(arvif, key, cmd, macaddr, def_idx);
+ if (ret)
+ return ret;
+
+ ret = wait_for_completion_timeout(&ar->install_key_done, 3*HZ);
+ if (ret == 0)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static int ath10k_install_peer_wep_keys(struct ath10k_vif *arvif,
+ const u8 *addr)
+{
+ struct ath10k *ar = arvif->ar;
+ struct ath10k_peer *peer;
+ int ret;
+ int i;
+ bool def_idx;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ spin_lock_bh(&ar->data_lock);
+ peer = ath10k_peer_find(ar, arvif->vdev_id, addr);
+ spin_unlock_bh(&ar->data_lock);
+
+ if (!peer)
+ return -ENOENT;
+
+ for (i = 0; i < ARRAY_SIZE(arvif->wep_keys); i++) {
+ if (arvif->wep_keys[i] == NULL)
+ continue;
+ /* set TX_USAGE flag for default key id */
+ if (arvif->def_wep_key_idx == i)
+ def_idx = true;
+ else
+ def_idx = false;
+
+ ret = ath10k_install_key(arvif, arvif->wep_keys[i], SET_KEY,
+ addr, def_idx);
+ if (ret)
+ return ret;
+
+ spin_lock_bh(&ar->data_lock);
+ peer->keys[i] = arvif->wep_keys[i];
+ spin_unlock_bh(&ar->data_lock);
+ }
+
+ return 0;
+}
+
+static int ath10k_clear_peer_keys(struct ath10k_vif *arvif,
+ const u8 *addr)
+{
+ struct ath10k *ar = arvif->ar;
+ struct ath10k_peer *peer;
+ int first_errno = 0;
+ int ret;
+ int i;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ spin_lock_bh(&ar->data_lock);
+ peer = ath10k_peer_find(ar, arvif->vdev_id, addr);
+ spin_unlock_bh(&ar->data_lock);
+
+ if (!peer)
+ return -ENOENT;
+
+ for (i = 0; i < ARRAY_SIZE(peer->keys); i++) {
+ if (peer->keys[i] == NULL)
+ continue;
+
+ /* key flags are not required to delete the key */
+ ret = ath10k_install_key(arvif, peer->keys[i],
+ DISABLE_KEY, addr, false);
+ if (ret && first_errno == 0)
+ first_errno = ret;
+
+ if (ret)
+ ath10k_warn(ar, "failed to remove peer wep key %d: %d\n",
+ i, ret);
+
+ spin_lock_bh(&ar->data_lock);
+ peer->keys[i] = NULL;
+ spin_unlock_bh(&ar->data_lock);
+ }
+
+ return first_errno;
+}
+
+bool ath10k_mac_is_peer_wep_key_set(struct ath10k *ar, const u8 *addr,
+ u8 keyidx)
+{
+ struct ath10k_peer *peer;
+ int i;
+
+ lockdep_assert_held(&ar->data_lock);
+
+ /* We don't know which vdev this peer belongs to,
+ * since WMI doesn't give us that information.
+ *
+ * FIXME: multi-bss needs to be handled.
+ */
+ peer = ath10k_peer_find(ar, 0, addr);
+ if (!peer)
+ return false;
+
+ for (i = 0; i < ARRAY_SIZE(peer->keys); i++) {
+ if (peer->keys[i] && peer->keys[i]->keyidx == keyidx)
+ return true;
+ }
+
+ return false;
+}
+
+static int ath10k_clear_vdev_key(struct ath10k_vif *arvif,
+ struct ieee80211_key_conf *key)
+{
+ struct ath10k *ar = arvif->ar;
+ struct ath10k_peer *peer;
+ u8 addr[ETH_ALEN];
+ int first_errno = 0;
+ int ret;
+ int i;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ for (;;) {
+ /* since ath10k_install_key we can't hold data_lock all the
+ * time, so we try to remove the keys incrementally */
+ spin_lock_bh(&ar->data_lock);
+ i = 0;
+ list_for_each_entry(peer, &ar->peers, list) {
+ for (i = 0; i < ARRAY_SIZE(peer->keys); i++) {
+ if (peer->keys[i] == key) {
+ ether_addr_copy(addr, peer->addr);
+ peer->keys[i] = NULL;
+ break;
+ }
+ }
+
+ if (i < ARRAY_SIZE(peer->keys))
+ break;
+ }
+ spin_unlock_bh(&ar->data_lock);
+
+ if (i == ARRAY_SIZE(peer->keys))
+ break;
+ /* key flags are not required to delete the key */
+ ret = ath10k_install_key(arvif, key, DISABLE_KEY, addr, false);
+ if (ret && first_errno == 0)
+ first_errno = ret;
+
+ if (ret)
+ ath10k_warn(ar, "failed to remove key for %pM: %d\n",
+ addr, ret);
+ }
+
+ return first_errno;
+}
+
+/*********************/
+/* General utilities */
+/*********************/
+
+static inline enum wmi_phy_mode
+chan_to_phymode(const struct cfg80211_chan_def *chandef)
+{
+ enum wmi_phy_mode phymode = MODE_UNKNOWN;
+
+ switch (chandef->chan->band) {
+ case IEEE80211_BAND_2GHZ:
+ switch (chandef->width) {
+ case NL80211_CHAN_WIDTH_20_NOHT:
+ if (chandef->chan->flags & IEEE80211_CHAN_NO_OFDM)
+ phymode = MODE_11B;
+ else
+ phymode = MODE_11G;
+ break;
+ case NL80211_CHAN_WIDTH_20:
+ phymode = MODE_11NG_HT20;
+ break;
+ case NL80211_CHAN_WIDTH_40:
+ phymode = MODE_11NG_HT40;
+ break;
+ case NL80211_CHAN_WIDTH_5:
+ case NL80211_CHAN_WIDTH_10:
+ case NL80211_CHAN_WIDTH_80:
+ case NL80211_CHAN_WIDTH_80P80:
+ case NL80211_CHAN_WIDTH_160:
+ phymode = MODE_UNKNOWN;
+ break;
+ }
+ break;
+ case IEEE80211_BAND_5GHZ:
+ switch (chandef->width) {
+ case NL80211_CHAN_WIDTH_20_NOHT:
+ phymode = MODE_11A;
+ break;
+ case NL80211_CHAN_WIDTH_20:
+ phymode = MODE_11NA_HT20;
+ break;
+ case NL80211_CHAN_WIDTH_40:
+ phymode = MODE_11NA_HT40;
+ break;
+ case NL80211_CHAN_WIDTH_80:
+ phymode = MODE_11AC_VHT80;
+ break;
+ case NL80211_CHAN_WIDTH_5:
+ case NL80211_CHAN_WIDTH_10:
+ case NL80211_CHAN_WIDTH_80P80:
+ case NL80211_CHAN_WIDTH_160:
+ phymode = MODE_UNKNOWN;
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+
+ WARN_ON(phymode == MODE_UNKNOWN);
+ return phymode;
+}
+
+static u8 ath10k_parse_mpdudensity(u8 mpdudensity)
+{
+/*
+ * 802.11n D2.0 defined values for "Minimum MPDU Start Spacing":
+ * 0 for no restriction
+ * 1 for 1/4 us
+ * 2 for 1/2 us
+ * 3 for 1 us
+ * 4 for 2 us
+ * 5 for 4 us
+ * 6 for 8 us
+ * 7 for 16 us
+ */
+ switch (mpdudensity) {
+ case 0:
+ return 0;
+ case 1:
+ case 2:
+ case 3:
+ /* Our lower layer calculations limit our precision to
+ 1 microsecond */
+ return 1;
+ case 4:
+ return 2;
+ case 5:
+ return 4;
+ case 6:
+ return 8;
+ case 7:
+ return 16;
+ default:
+ return 0;
+ }
+}
+
+static int ath10k_peer_create(struct ath10k *ar, u32 vdev_id, const u8 *addr)
+{
+ int ret;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ if (ar->num_peers >= ar->max_num_peers)
+ return -ENOBUFS;
+
+ ret = ath10k_wmi_peer_create(ar, vdev_id, addr);
+ if (ret) {
+ ath10k_warn(ar, "failed to create wmi peer %pM on vdev %i: %i\n",
+ addr, vdev_id, ret);
+ return ret;
+ }
+
+ ret = ath10k_wait_for_peer_created(ar, vdev_id, addr);
+ if (ret) {
+ ath10k_warn(ar, "failed to wait for created wmi peer %pM on vdev %i: %i\n",
+ addr, vdev_id, ret);
+ return ret;
+ }
+
+ ar->num_peers++;
+
+ return 0;
+}
+
+static int ath10k_mac_set_kickout(struct ath10k_vif *arvif)
+{
+ struct ath10k *ar = arvif->ar;
+ u32 param;
+ int ret;
+
+ param = ar->wmi.pdev_param->sta_kickout_th;
+ ret = ath10k_wmi_pdev_set_param(ar, param,
+ ATH10K_KICKOUT_THRESHOLD);
+ if (ret) {
+ ath10k_warn(ar, "failed to set kickout threshold on vdev %i: %d\n",
+ arvif->vdev_id, ret);
+ return ret;
+ }
+
+ param = ar->wmi.vdev_param->ap_keepalive_min_idle_inactive_time_secs;
+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, param,
+ ATH10K_KEEPALIVE_MIN_IDLE);
+ if (ret) {
+ ath10k_warn(ar, "failed to set keepalive minimum idle time on vdev %i: %d\n",
+ arvif->vdev_id, ret);
+ return ret;
+ }
+
+ param = ar->wmi.vdev_param->ap_keepalive_max_idle_inactive_time_secs;
+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, param,
+ ATH10K_KEEPALIVE_MAX_IDLE);
+ if (ret) {
+ ath10k_warn(ar, "failed to set keepalive maximum idle time on vdev %i: %d\n",
+ arvif->vdev_id, ret);
+ return ret;
+ }
+
+ param = ar->wmi.vdev_param->ap_keepalive_max_unresponsive_time_secs;
+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, param,
+ ATH10K_KEEPALIVE_MAX_UNRESPONSIVE);
+ if (ret) {
+ ath10k_warn(ar, "failed to set keepalive maximum unresponsive time on vdev %i: %d\n",
+ arvif->vdev_id, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int ath10k_mac_set_rts(struct ath10k_vif *arvif, u32 value)
+{
+ struct ath10k *ar = arvif->ar;
+ u32 vdev_param;
+
+ vdev_param = ar->wmi.vdev_param->rts_threshold;
+ return ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, value);
+}
+
+static int ath10k_mac_set_frag(struct ath10k_vif *arvif, u32 value)
+{
+ struct ath10k *ar = arvif->ar;
+ u32 vdev_param;
+
+ if (value != 0xFFFFFFFF)
+ value = clamp_t(u32, arvif->ar->hw->wiphy->frag_threshold,
+ ATH10K_FRAGMT_THRESHOLD_MIN,
+ ATH10K_FRAGMT_THRESHOLD_MAX);
+
+ vdev_param = ar->wmi.vdev_param->fragmentation_threshold;
+ return ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, value);
+}
+
+static int ath10k_peer_delete(struct ath10k *ar, u32 vdev_id, const u8 *addr)
+{
+ int ret;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ ret = ath10k_wmi_peer_delete(ar, vdev_id, addr);
+ if (ret)
+ return ret;
+
+ ret = ath10k_wait_for_peer_deleted(ar, vdev_id, addr);
+ if (ret)
+ return ret;
+
+ ar->num_peers--;
+
+ return 0;
+}
+
+static void ath10k_peer_cleanup(struct ath10k *ar, u32 vdev_id)
+{
+ struct ath10k_peer *peer, *tmp;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ spin_lock_bh(&ar->data_lock);
+ list_for_each_entry_safe(peer, tmp, &ar->peers, list) {
+ if (peer->vdev_id != vdev_id)
+ continue;
+
+ ath10k_warn(ar, "removing stale peer %pM from vdev_id %d\n",
+ peer->addr, vdev_id);
+
+ list_del(&peer->list);
+ kfree(peer);
+ ar->num_peers--;
+ }
+ spin_unlock_bh(&ar->data_lock);
+}
+
+static void ath10k_peer_cleanup_all(struct ath10k *ar)
+{
+ struct ath10k_peer *peer, *tmp;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ spin_lock_bh(&ar->data_lock);
+ list_for_each_entry_safe(peer, tmp, &ar->peers, list) {
+ list_del(&peer->list);
+ kfree(peer);
+ }
+ spin_unlock_bh(&ar->data_lock);
+
+ ar->num_peers = 0;
+ ar->num_stations = 0;
+}
+
+/************************/
+/* Interface management */
+/************************/
+
+void ath10k_mac_vif_beacon_free(struct ath10k_vif *arvif)
+{
+ struct ath10k *ar = arvif->ar;
+
+ lockdep_assert_held(&ar->data_lock);
+
+ if (!arvif->beacon)
+ return;
+
+ if (!arvif->beacon_buf)
+ dma_unmap_single(ar->dev, ATH10K_SKB_CB(arvif->beacon)->paddr,
+ arvif->beacon->len, DMA_TO_DEVICE);
+
+ if (WARN_ON(arvif->beacon_state != ATH10K_BEACON_SCHEDULED &&
+ arvif->beacon_state != ATH10K_BEACON_SENT))
+ return;
+
+ dev_kfree_skb_any(arvif->beacon);
+
+ arvif->beacon = NULL;
+ arvif->beacon_state = ATH10K_BEACON_SCHEDULED;
+}
+
+static void ath10k_mac_vif_beacon_cleanup(struct ath10k_vif *arvif)
+{
+ struct ath10k *ar = arvif->ar;
+
+ lockdep_assert_held(&ar->data_lock);
+
+ ath10k_mac_vif_beacon_free(arvif);
+
+ if (arvif->beacon_buf) {
+ dma_free_coherent(ar->dev, IEEE80211_MAX_FRAME_LEN,
+ arvif->beacon_buf, arvif->beacon_paddr);
+ arvif->beacon_buf = NULL;
+ }
+}
+
+static inline int ath10k_vdev_setup_sync(struct ath10k *ar)
+{
+ int ret;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ if (test_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags))
+ return -ESHUTDOWN;
+
+ ret = wait_for_completion_timeout(&ar->vdev_setup_done,
+ ATH10K_VDEV_SETUP_TIMEOUT_HZ);
+ if (ret == 0)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static int ath10k_monitor_vdev_start(struct ath10k *ar, int vdev_id)
+{
+ struct cfg80211_chan_def *chandef = &ar->chandef;
+ struct ieee80211_channel *channel = chandef->chan;
+ struct wmi_vdev_start_request_arg arg = {};
+ int ret = 0;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ arg.vdev_id = vdev_id;
+ arg.channel.freq = channel->center_freq;
+ arg.channel.band_center_freq1 = chandef->center_freq1;
+
+ /* TODO setup this dynamically, what in case we
+ don't have any vifs? */
+ arg.channel.mode = chan_to_phymode(chandef);
+ arg.channel.chan_radar =
+ !!(channel->flags & IEEE80211_CHAN_RADAR);
+
+ arg.channel.min_power = 0;
+ arg.channel.max_power = channel->max_power * 2;
+ arg.channel.max_reg_power = channel->max_reg_power * 2;
+ arg.channel.max_antenna_gain = channel->max_antenna_gain * 2;
+
+ reinit_completion(&ar->vdev_setup_done);
+
+ ret = ath10k_wmi_vdev_start(ar, &arg);
+ if (ret) {
+ ath10k_warn(ar, "failed to request monitor vdev %i start: %d\n",
+ vdev_id, ret);
+ return ret;
+ }
+
+ ret = ath10k_vdev_setup_sync(ar);
+ if (ret) {
+ ath10k_warn(ar, "failed to synchronize setup for monitor vdev %i start: %d\n",
+ vdev_id, ret);
+ return ret;
+ }
+
+ ret = ath10k_wmi_vdev_up(ar, vdev_id, 0, ar->mac_addr);
+ if (ret) {
+ ath10k_warn(ar, "failed to put up monitor vdev %i: %d\n",
+ vdev_id, ret);
+ goto vdev_stop;
+ }
+
+ ar->monitor_vdev_id = vdev_id;
+
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac monitor vdev %i started\n",
+ ar->monitor_vdev_id);
+ return 0;
+
+vdev_stop:
+ ret = ath10k_wmi_vdev_stop(ar, ar->monitor_vdev_id);
+ if (ret)
+ ath10k_warn(ar, "failed to stop monitor vdev %i after start failure: %d\n",
+ ar->monitor_vdev_id, ret);
+
+ return ret;
+}
+
+static int ath10k_monitor_vdev_stop(struct ath10k *ar)
+{
+ int ret = 0;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ ret = ath10k_wmi_vdev_down(ar, ar->monitor_vdev_id);
+ if (ret)
+ ath10k_warn(ar, "failed to put down monitor vdev %i: %d\n",
+ ar->monitor_vdev_id, ret);
+
+ reinit_completion(&ar->vdev_setup_done);
+
+ ret = ath10k_wmi_vdev_stop(ar, ar->monitor_vdev_id);
+ if (ret)
+ ath10k_warn(ar, "failed to to request monitor vdev %i stop: %d\n",
+ ar->monitor_vdev_id, ret);
+
+ ret = ath10k_vdev_setup_sync(ar);
+ if (ret)
+ ath10k_warn(ar, "failed to synchronize monitor vdev %i stop: %d\n",
+ ar->monitor_vdev_id, ret);
+
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac monitor vdev %i stopped\n",
+ ar->monitor_vdev_id);
+ return ret;
+}
+
+static int ath10k_monitor_vdev_create(struct ath10k *ar)
+{
+ int bit, ret = 0;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ if (ar->free_vdev_map == 0) {
+ ath10k_warn(ar, "failed to find free vdev id for monitor vdev\n");
+ return -ENOMEM;
+ }
+
+ bit = __ffs64(ar->free_vdev_map);
+
+ ar->monitor_vdev_id = bit;
+
+ ret = ath10k_wmi_vdev_create(ar, ar->monitor_vdev_id,
+ WMI_VDEV_TYPE_MONITOR,
+ 0, ar->mac_addr);
+ if (ret) {
+ ath10k_warn(ar, "failed to request monitor vdev %i creation: %d\n",
+ ar->monitor_vdev_id, ret);
+ return ret;
+ }
+
+ ar->free_vdev_map &= ~(1LL << ar->monitor_vdev_id);
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac monitor vdev %d created\n",
+ ar->monitor_vdev_id);
+
+ return 0;
+}
+
+static int ath10k_monitor_vdev_delete(struct ath10k *ar)
+{
+ int ret = 0;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ ret = ath10k_wmi_vdev_delete(ar, ar->monitor_vdev_id);
+ if (ret) {
+ ath10k_warn(ar, "failed to request wmi monitor vdev %i removal: %d\n",
+ ar->monitor_vdev_id, ret);
+ return ret;
+ }
+
+ ar->free_vdev_map |= 1LL << ar->monitor_vdev_id;
+
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac monitor vdev %d deleted\n",
+ ar->monitor_vdev_id);
+ return ret;
+}
+
+static int ath10k_monitor_start(struct ath10k *ar)
+{
+ int ret;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ ret = ath10k_monitor_vdev_create(ar);
+ if (ret) {
+ ath10k_warn(ar, "failed to create monitor vdev: %d\n", ret);
+ return ret;
+ }
+
+ ret = ath10k_monitor_vdev_start(ar, ar->monitor_vdev_id);
+ if (ret) {
+ ath10k_warn(ar, "failed to start monitor vdev: %d\n", ret);
+ ath10k_monitor_vdev_delete(ar);
+ return ret;
+ }
+
+ ar->monitor_started = true;
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac monitor started\n");
+
+ return 0;
+}
+
+static int ath10k_monitor_stop(struct ath10k *ar)
+{
+ int ret;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ ret = ath10k_monitor_vdev_stop(ar);
+ if (ret) {
+ ath10k_warn(ar, "failed to stop monitor vdev: %d\n", ret);
+ return ret;
+ }
+
+ ret = ath10k_monitor_vdev_delete(ar);
+ if (ret) {
+ ath10k_warn(ar, "failed to delete monitor vdev: %d\n", ret);
+ return ret;
+ }
+
+ ar->monitor_started = false;
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac monitor stopped\n");
+
+ return 0;
+}
+
+static int ath10k_monitor_recalc(struct ath10k *ar)
+{
+ bool should_start;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ should_start = ar->monitor ||
+ ar->filter_flags & FIF_PROMISC_IN_BSS ||
+ test_bit(ATH10K_CAC_RUNNING, &ar->dev_flags);
+
+ ath10k_dbg(ar, ATH10K_DBG_MAC,
+ "mac monitor recalc started? %d should? %d\n",
+ ar->monitor_started, should_start);
+
+ if (should_start == ar->monitor_started)
+ return 0;
+
+ if (should_start)
+ return ath10k_monitor_start(ar);
+
+ return ath10k_monitor_stop(ar);
+}
+
+static int ath10k_recalc_rtscts_prot(struct ath10k_vif *arvif)
+{
+ struct ath10k *ar = arvif->ar;
+ u32 vdev_param, rts_cts = 0;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ vdev_param = ar->wmi.vdev_param->enable_rtscts;
+
+ if (arvif->use_cts_prot || arvif->num_legacy_stations > 0)
+ rts_cts |= SM(WMI_RTSCTS_ENABLED, WMI_RTSCTS_SET);
+
+ if (arvif->num_legacy_stations > 0)
+ rts_cts |= SM(WMI_RTSCTS_ACROSS_SW_RETRIES,
+ WMI_RTSCTS_PROFILE);
+
+ return ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
+ rts_cts);
+}
+
+static int ath10k_start_cac(struct ath10k *ar)
+{
+ int ret;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ set_bit(ATH10K_CAC_RUNNING, &ar->dev_flags);
+
+ ret = ath10k_monitor_recalc(ar);
+ if (ret) {
+ ath10k_warn(ar, "failed to start monitor (cac): %d\n", ret);
+ clear_bit(ATH10K_CAC_RUNNING, &ar->dev_flags);
+ return ret;
+ }
+
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac cac start monitor vdev %d\n",
+ ar->monitor_vdev_id);
+
+ return 0;
+}
+
+static int ath10k_stop_cac(struct ath10k *ar)
+{
+ lockdep_assert_held(&ar->conf_mutex);
+
+ /* CAC is not running - do nothing */
+ if (!test_bit(ATH10K_CAC_RUNNING, &ar->dev_flags))
+ return 0;
+
+ clear_bit(ATH10K_CAC_RUNNING, &ar->dev_flags);
+ ath10k_monitor_stop(ar);
+
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac cac finished\n");
+
+ return 0;
+}
+
+static void ath10k_recalc_radar_detection(struct ath10k *ar)
+{
+ int ret;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ ath10k_stop_cac(ar);
+
+ if (!ar->radar_enabled)
+ return;
+
+ if (ar->num_started_vdevs > 0)
+ return;
+
+ ret = ath10k_start_cac(ar);
+ if (ret) {
+ /*
+ * Not possible to start CAC on current channel so starting
+ * radiation is not allowed, make this channel DFS_UNAVAILABLE
+ * by indicating that radar was detected.
+ */
+ ath10k_warn(ar, "failed to start CAC: %d\n", ret);
+ ieee80211_radar_detected(ar->hw);
+ }
+}
+
+static int ath10k_vdev_start_restart(struct ath10k_vif *arvif, bool restart)
+{
+ struct ath10k *ar = arvif->ar;
+ struct cfg80211_chan_def *chandef = &ar->chandef;
+ struct wmi_vdev_start_request_arg arg = {};
+ int ret = 0;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ reinit_completion(&ar->vdev_setup_done);
+
+ arg.vdev_id = arvif->vdev_id;
+ arg.dtim_period = arvif->dtim_period;
+ arg.bcn_intval = arvif->beacon_interval;
+
+ arg.channel.freq = chandef->chan->center_freq;
+ arg.channel.band_center_freq1 = chandef->center_freq1;
+ arg.channel.mode = chan_to_phymode(chandef);
+
+ arg.channel.min_power = 0;
+ arg.channel.max_power = chandef->chan->max_power * 2;
+ arg.channel.max_reg_power = chandef->chan->max_reg_power * 2;
+ arg.channel.max_antenna_gain = chandef->chan->max_antenna_gain * 2;
+
+ if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
+ arg.ssid = arvif->u.ap.ssid;
+ arg.ssid_len = arvif->u.ap.ssid_len;
+ arg.hidden_ssid = arvif->u.ap.hidden_ssid;
+
+ /* For now allow DFS for AP mode */
+ arg.channel.chan_radar =
+ !!(chandef->chan->flags & IEEE80211_CHAN_RADAR);
+ } else if (arvif->vdev_type == WMI_VDEV_TYPE_IBSS) {
+ arg.ssid = arvif->vif->bss_conf.ssid;
+ arg.ssid_len = arvif->vif->bss_conf.ssid_len;
+ }
+
+ ath10k_dbg(ar, ATH10K_DBG_MAC,
+ "mac vdev %d start center_freq %d phymode %s\n",
+ arg.vdev_id, arg.channel.freq,
+ ath10k_wmi_phymode_str(arg.channel.mode));
+
+ if (restart)
+ ret = ath10k_wmi_vdev_restart(ar, &arg);
+ else
+ ret = ath10k_wmi_vdev_start(ar, &arg);
+
+ if (ret) {
+ ath10k_warn(ar, "failed to start WMI vdev %i: %d\n",
+ arg.vdev_id, ret);
+ return ret;
+ }
+
+ ret = ath10k_vdev_setup_sync(ar);
+ if (ret) {
+ ath10k_warn(ar,
+ "failed to synchronize setup for vdev %i restart %d: %d\n",
+ arg.vdev_id, restart, ret);
+ return ret;
+ }
+
+ ar->num_started_vdevs++;
+ ath10k_recalc_radar_detection(ar);
+
+ return ret;
+}
+
+static int ath10k_vdev_start(struct ath10k_vif *arvif)
+{
+ return ath10k_vdev_start_restart(arvif, false);
+}
+
+static int ath10k_vdev_restart(struct ath10k_vif *arvif)
+{
+ return ath10k_vdev_start_restart(arvif, true);
+}
+
+static int ath10k_vdev_stop(struct ath10k_vif *arvif)
+{
+ struct ath10k *ar = arvif->ar;
+ int ret;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ reinit_completion(&ar->vdev_setup_done);
+
+ ret = ath10k_wmi_vdev_stop(ar, arvif->vdev_id);
+ if (ret) {
+ ath10k_warn(ar, "failed to stop WMI vdev %i: %d\n",
+ arvif->vdev_id, ret);
+ return ret;
+ }
+
+ ret = ath10k_vdev_setup_sync(ar);
+ if (ret) {
+ ath10k_warn(ar, "failed to synchronize setup for vdev %i stop: %d\n",
+ arvif->vdev_id, ret);
+ return ret;
+ }
+
+ WARN_ON(ar->num_started_vdevs == 0);
+
+ if (ar->num_started_vdevs != 0) {
+ ar->num_started_vdevs--;
+ ath10k_recalc_radar_detection(ar);
+ }
+
+ return ret;
+}
+
+static int ath10k_mac_setup_bcn_p2p_ie(struct ath10k_vif *arvif,
+ struct sk_buff *bcn)
+{
+ struct ath10k *ar = arvif->ar;
+ struct ieee80211_mgmt *mgmt;
+ const u8 *p2p_ie;
+ int ret;
+
+ if (arvif->vdev_type != WMI_VDEV_TYPE_AP)
+ return 0;
+
+ if (arvif->vdev_subtype != WMI_VDEV_SUBTYPE_P2P_GO)
+ return 0;
+
+ mgmt = (void *)bcn->data;
+ p2p_ie = cfg80211_find_vendor_ie(WLAN_OUI_WFA, WLAN_OUI_TYPE_WFA_P2P,
+ mgmt->u.beacon.variable,
+ bcn->len - (mgmt->u.beacon.variable -
+ bcn->data));
+ if (!p2p_ie)
+ return -ENOENT;
+
+ ret = ath10k_wmi_p2p_go_bcn_ie(ar, arvif->vdev_id, p2p_ie);
+ if (ret) {
+ ath10k_warn(ar, "failed to submit p2p go bcn ie for vdev %i: %d\n",
+ arvif->vdev_id, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int ath10k_mac_remove_vendor_ie(struct sk_buff *skb, unsigned int oui,
+ u8 oui_type, size_t ie_offset)
+{
+ size_t len;
+ const u8 *next;
+ const u8 *end;
+ u8 *ie;
+
+ if (WARN_ON(skb->len < ie_offset))
+ return -EINVAL;
+
+ ie = (u8 *)cfg80211_find_vendor_ie(oui, oui_type,
+ skb->data + ie_offset,
+ skb->len - ie_offset);
+ if (!ie)
+ return -ENOENT;
+
+ len = ie[1] + 2;
+ end = skb->data + skb->len;
+ next = ie + len;
+
+ if (WARN_ON(next > end))
+ return -EINVAL;
+
+ memmove(ie, next, end - next);
+ skb_trim(skb, skb->len - len);
+
+ return 0;
+}
+
+static int ath10k_mac_setup_bcn_tmpl(struct ath10k_vif *arvif)
+{
+ struct ath10k *ar = arvif->ar;
+ struct ieee80211_hw *hw = ar->hw;
+ struct ieee80211_vif *vif = arvif->vif;
+ struct ieee80211_mutable_offsets offs = {};
+ struct sk_buff *bcn;
+ int ret;
+
+ if (!test_bit(WMI_SERVICE_BEACON_OFFLOAD, ar->wmi.svc_map))
+ return 0;
+
+ bcn = ieee80211_beacon_get_template(hw, vif, &offs);
+ if (!bcn) {
+ ath10k_warn(ar, "failed to get beacon template from mac80211\n");
+ return -EPERM;
+ }
+
+ ret = ath10k_mac_setup_bcn_p2p_ie(arvif, bcn);
+ if (ret) {
+ ath10k_warn(ar, "failed to setup p2p go bcn ie: %d\n", ret);
+ kfree_skb(bcn);
+ return ret;
+ }
+
+ /* P2P IE is inserted by firmware automatically (as configured above)
+ * so remove it from the base beacon template to avoid duplicate P2P
+ * IEs in beacon frames.
+ */
+ ath10k_mac_remove_vendor_ie(bcn, WLAN_OUI_WFA, WLAN_OUI_TYPE_WFA_P2P,
+ offsetof(struct ieee80211_mgmt,
+ u.beacon.variable));
+
+ ret = ath10k_wmi_bcn_tmpl(ar, arvif->vdev_id, offs.tim_offset, bcn, 0,
+ 0, NULL, 0);
+ kfree_skb(bcn);
+
+ if (ret) {
+ ath10k_warn(ar, "failed to submit beacon template command: %d\n",
+ ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int ath10k_mac_setup_prb_tmpl(struct ath10k_vif *arvif)
+{
+ struct ath10k *ar = arvif->ar;
+ struct ieee80211_hw *hw = ar->hw;
+ struct ieee80211_vif *vif = arvif->vif;
+ struct sk_buff *prb;
+ int ret;
+
+ if (!test_bit(WMI_SERVICE_BEACON_OFFLOAD, ar->wmi.svc_map))
+ return 0;
+
+ prb = ieee80211_proberesp_get(hw, vif);
+ if (!prb) {
+ ath10k_warn(ar, "failed to get probe resp template from mac80211\n");
+ return -EPERM;
+ }
+
+ ret = ath10k_wmi_prb_tmpl(ar, arvif->vdev_id, prb);
+ kfree_skb(prb);
+
+ if (ret) {
+ ath10k_warn(ar, "failed to submit probe resp template command: %d\n",
+ ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void ath10k_control_beaconing(struct ath10k_vif *arvif,
+ struct ieee80211_bss_conf *info)
+{
+ struct ath10k *ar = arvif->ar;
+ int ret = 0;
+
+ lockdep_assert_held(&arvif->ar->conf_mutex);
+
+ if (!info->enable_beacon) {
+ ath10k_vdev_stop(arvif);
+
+ arvif->is_started = false;
+ arvif->is_up = false;
+
+ spin_lock_bh(&arvif->ar->data_lock);
+ ath10k_mac_vif_beacon_free(arvif);
+ spin_unlock_bh(&arvif->ar->data_lock);
+
+ return;
+ }
+
+ arvif->tx_seq_no = 0x1000;
+
+ ret = ath10k_vdev_start(arvif);
+ if (ret)
+ return;
+
+ arvif->aid = 0;
+ ether_addr_copy(arvif->bssid, info->bssid);
+
+ ret = ath10k_wmi_vdev_up(arvif->ar, arvif->vdev_id, arvif->aid,
+ arvif->bssid);
+ if (ret) {
+ ath10k_warn(ar, "failed to bring up vdev %d: %i\n",
+ arvif->vdev_id, ret);
+ ath10k_vdev_stop(arvif);
+ return;
+ }
+
+ arvif->is_started = true;
+ arvif->is_up = true;
+
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d up\n", arvif->vdev_id);
+}
+
+static void ath10k_control_ibss(struct ath10k_vif *arvif,
+ struct ieee80211_bss_conf *info,
+ const u8 self_peer[ETH_ALEN])
+{
+ struct ath10k *ar = arvif->ar;
+ u32 vdev_param;
+ int ret = 0;
+
+ lockdep_assert_held(&arvif->ar->conf_mutex);
+
+ if (!info->ibss_joined) {
+ ret = ath10k_peer_delete(arvif->ar, arvif->vdev_id, self_peer);
+ if (ret)
+ ath10k_warn(ar, "failed to delete IBSS self peer %pM for vdev %d: %d\n",
+ self_peer, arvif->vdev_id, ret);
+
+ if (is_zero_ether_addr(arvif->bssid))
+ return;
+
+ eth_zero_addr(arvif->bssid);
+
+ return;
+ }
+
+ ret = ath10k_peer_create(arvif->ar, arvif->vdev_id, self_peer);
+ if (ret) {
+ ath10k_warn(ar, "failed to create IBSS self peer %pM for vdev %d: %d\n",
+ self_peer, arvif->vdev_id, ret);
+ return;
+ }
+
+ vdev_param = arvif->ar->wmi.vdev_param->atim_window;
+ ret = ath10k_wmi_vdev_set_param(arvif->ar, arvif->vdev_id, vdev_param,
+ ATH10K_DEFAULT_ATIM);
+ if (ret)
+ ath10k_warn(ar, "failed to set IBSS ATIM for vdev %d: %d\n",
+ arvif->vdev_id, ret);
+}
+
+static int ath10k_mac_vif_recalc_ps_wake_threshold(struct ath10k_vif *arvif)
+{
+ struct ath10k *ar = arvif->ar;
+ u32 param;
+ u32 value;
+ int ret;
+
+ lockdep_assert_held(&arvif->ar->conf_mutex);
+
+ if (arvif->u.sta.uapsd)
+ value = WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER;
+ else
+ value = WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS;
+
+ param = WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD;
+ ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id, param, value);
+ if (ret) {
+ ath10k_warn(ar, "failed to submit ps wake threshold %u on vdev %i: %d\n",
+ value, arvif->vdev_id, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int ath10k_mac_vif_recalc_ps_poll_count(struct ath10k_vif *arvif)
+{
+ struct ath10k *ar = arvif->ar;
+ u32 param;
+ u32 value;
+ int ret;
+
+ lockdep_assert_held(&arvif->ar->conf_mutex);
+
+ if (arvif->u.sta.uapsd)
+ value = WMI_STA_PS_PSPOLL_COUNT_UAPSD;
+ else
+ value = WMI_STA_PS_PSPOLL_COUNT_NO_MAX;
+
+ param = WMI_STA_PS_PARAM_PSPOLL_COUNT;
+ ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
+ param, value);
+ if (ret) {
+ ath10k_warn(ar, "failed to submit ps poll count %u on vdev %i: %d\n",
+ value, arvif->vdev_id, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int ath10k_mac_ps_vif_count(struct ath10k *ar)
+{
+ struct ath10k_vif *arvif;
+ int num = 0;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ list_for_each_entry(arvif, &ar->arvifs, list)
+ if (arvif->ps)
+ num++;
+
+ return num;
+}
+
+static int ath10k_mac_vif_setup_ps(struct ath10k_vif *arvif)
+{
+ struct ath10k *ar = arvif->ar;
+ struct ieee80211_vif *vif = arvif->vif;
+ struct ieee80211_conf *conf = &ar->hw->conf;
+ enum wmi_sta_powersave_param param;
+ enum wmi_sta_ps_mode psmode;
+ int ret;
+ int ps_timeout;
+ bool enable_ps;
+
+ lockdep_assert_held(&arvif->ar->conf_mutex);
+
+ if (arvif->vif->type != NL80211_IFTYPE_STATION)
+ return 0;
+
+ enable_ps = arvif->ps;
+
+ if (enable_ps && ath10k_mac_ps_vif_count(ar) > 1 &&
+ !test_bit(ATH10K_FW_FEATURE_MULTI_VIF_PS_SUPPORT,
+ ar->fw_features)) {
+ ath10k_warn(ar, "refusing to enable ps on vdev %i: not supported by fw\n",
+ arvif->vdev_id);
+ enable_ps = false;
+ }
+
+ if (enable_ps) {
+ psmode = WMI_STA_PS_MODE_ENABLED;
+ param = WMI_STA_PS_PARAM_INACTIVITY_TIME;
+
+ ps_timeout = conf->dynamic_ps_timeout;
+ if (ps_timeout == 0) {
+ /* Firmware doesn't like 0 */
+ ps_timeout = ieee80211_tu_to_usec(
+ vif->bss_conf.beacon_int) / 1000;
+ }
+
+ ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id, param,
+ ps_timeout);
+ if (ret) {
+ ath10k_warn(ar, "failed to set inactivity time for vdev %d: %i\n",
+ arvif->vdev_id, ret);
+ return ret;
+ }
+ } else {
+ psmode = WMI_STA_PS_MODE_DISABLED;
+ }
+
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d psmode %s\n",
+ arvif->vdev_id, psmode ? "enable" : "disable");
+
+ ret = ath10k_wmi_set_psmode(ar, arvif->vdev_id, psmode);
+ if (ret) {
+ ath10k_warn(ar, "failed to set PS Mode %d for vdev %d: %d\n",
+ psmode, arvif->vdev_id, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int ath10k_mac_vif_disable_keepalive(struct ath10k_vif *arvif)
+{
+ struct ath10k *ar = arvif->ar;
+ struct wmi_sta_keepalive_arg arg = {};
+ int ret;
+
+ lockdep_assert_held(&arvif->ar->conf_mutex);
+
+ if (arvif->vdev_type != WMI_VDEV_TYPE_STA)
+ return 0;
+
+ if (!test_bit(WMI_SERVICE_STA_KEEP_ALIVE, ar->wmi.svc_map))
+ return 0;
+
+ /* Some firmware revisions have a bug and ignore the `enabled` field.
+ * Instead use the interval to disable the keepalive.
+ */
+ arg.vdev_id = arvif->vdev_id;
+ arg.enabled = 1;
+ arg.method = WMI_STA_KEEPALIVE_METHOD_NULL_FRAME;
+ arg.interval = WMI_STA_KEEPALIVE_INTERVAL_DISABLE;
+
+ ret = ath10k_wmi_sta_keepalive(ar, &arg);
+ if (ret) {
+ ath10k_warn(ar, "failed to submit keepalive on vdev %i: %d\n",
+ arvif->vdev_id, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+/**********************/
+/* Station management */
+/**********************/
+
+static u32 ath10k_peer_assoc_h_listen_intval(struct ath10k *ar,
+ struct ieee80211_vif *vif)
+{
+ /* Some firmware revisions have unstable STA powersave when listen
+ * interval is set too high (e.g. 5). The symptoms are firmware doesn't
+ * generate NullFunc frames properly even if buffered frames have been
+ * indicated in Beacon TIM. Firmware would seldom wake up to pull
+ * buffered frames. Often pinging the device from AP would simply fail.
+ *
+ * As a workaround set it to 1.
+ */
+ if (vif->type == NL80211_IFTYPE_STATION)
+ return 1;
+
+ return ar->hw->conf.listen_interval;
+}
+
+static void ath10k_peer_assoc_h_basic(struct ath10k *ar,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta,
+ struct wmi_peer_assoc_complete_arg *arg)
+{
+ struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ ether_addr_copy(arg->addr, sta->addr);
+ arg->vdev_id = arvif->vdev_id;
+ arg->peer_aid = sta->aid;
+ arg->peer_flags |= WMI_PEER_AUTH;
+ arg->peer_listen_intval = ath10k_peer_assoc_h_listen_intval(ar, vif);
+ arg->peer_num_spatial_streams = 1;
+ arg->peer_caps = vif->bss_conf.assoc_capability;
+}
+
+static void ath10k_peer_assoc_h_crypto(struct ath10k *ar,
+ struct ieee80211_vif *vif,
+ struct wmi_peer_assoc_complete_arg *arg)
+{
+ struct ieee80211_bss_conf *info = &vif->bss_conf;
+ struct cfg80211_bss *bss;
+ const u8 *rsnie = NULL;
+ const u8 *wpaie = NULL;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ bss = cfg80211_get_bss(ar->hw->wiphy, ar->hw->conf.chandef.chan,
+ info->bssid, NULL, 0, IEEE80211_BSS_TYPE_ANY,
+ IEEE80211_PRIVACY_ANY);
+ if (bss) {
+ const struct cfg80211_bss_ies *ies;
+
+ rcu_read_lock();
+ rsnie = ieee80211_bss_get_ie(bss, WLAN_EID_RSN);
+
+ ies = rcu_dereference(bss->ies);
+
+ wpaie = cfg80211_find_vendor_ie(WLAN_OUI_MICROSOFT,
+ WLAN_OUI_TYPE_MICROSOFT_WPA,
+ ies->data,
+ ies->len);
+ rcu_read_unlock();
+ cfg80211_put_bss(ar->hw->wiphy, bss);
+ }
+
+ /* FIXME: base on RSN IE/WPA IE is a correct idea? */
+ if (rsnie || wpaie) {
+ ath10k_dbg(ar, ATH10K_DBG_WMI, "%s: rsn ie found\n", __func__);
+ arg->peer_flags |= WMI_PEER_NEED_PTK_4_WAY;
+ }
+
+ if (wpaie) {
+ ath10k_dbg(ar, ATH10K_DBG_WMI, "%s: wpa ie found\n", __func__);
+ arg->peer_flags |= WMI_PEER_NEED_GTK_2_WAY;
+ }
+}
+
+static void ath10k_peer_assoc_h_rates(struct ath10k *ar,
+ struct ieee80211_sta *sta,
+ struct wmi_peer_assoc_complete_arg *arg)
+{
+ struct wmi_rate_set_arg *rateset = &arg->peer_legacy_rates;
+ const struct ieee80211_supported_band *sband;
+ const struct ieee80211_rate *rates;
+ u32 ratemask;
+ int i;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ sband = ar->hw->wiphy->bands[ar->hw->conf.chandef.chan->band];
+ ratemask = sta->supp_rates[ar->hw->conf.chandef.chan->band];
+ rates = sband->bitrates;
+
+ rateset->num_rates = 0;
+
+ for (i = 0; i < 32; i++, ratemask >>= 1, rates++) {
+ if (!(ratemask & 1))
+ continue;
+
+ rateset->rates[rateset->num_rates] = rates->hw_value;
+ rateset->num_rates++;
+ }
+}
+
+static void ath10k_peer_assoc_h_ht(struct ath10k *ar,
+ struct ieee80211_sta *sta,
+ struct wmi_peer_assoc_complete_arg *arg)
+{
+ const struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
+ int i, n;
+ u32 stbc;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ if (!ht_cap->ht_supported)
+ return;
+
+ arg->peer_flags |= WMI_PEER_HT;
+ arg->peer_max_mpdu = (1 << (IEEE80211_HT_MAX_AMPDU_FACTOR +
+ ht_cap->ampdu_factor)) - 1;
+
+ arg->peer_mpdu_density =
+ ath10k_parse_mpdudensity(ht_cap->ampdu_density);
+
+ arg->peer_ht_caps = ht_cap->cap;
+ arg->peer_rate_caps |= WMI_RC_HT_FLAG;
+
+ if (ht_cap->cap & IEEE80211_HT_CAP_LDPC_CODING)
+ arg->peer_flags |= WMI_PEER_LDPC;
+
+ if (sta->bandwidth >= IEEE80211_STA_RX_BW_40) {
+ arg->peer_flags |= WMI_PEER_40MHZ;
+ arg->peer_rate_caps |= WMI_RC_CW40_FLAG;
+ }
+
+ if (ht_cap->cap & IEEE80211_HT_CAP_SGI_20)
+ arg->peer_rate_caps |= WMI_RC_SGI_FLAG;
+
+ if (ht_cap->cap & IEEE80211_HT_CAP_SGI_40)
+ arg->peer_rate_caps |= WMI_RC_SGI_FLAG;
+
+ if (ht_cap->cap & IEEE80211_HT_CAP_TX_STBC) {
+ arg->peer_rate_caps |= WMI_RC_TX_STBC_FLAG;
+ arg->peer_flags |= WMI_PEER_STBC;
+ }
+
+ if (ht_cap->cap & IEEE80211_HT_CAP_RX_STBC) {
+ stbc = ht_cap->cap & IEEE80211_HT_CAP_RX_STBC;
+ stbc = stbc >> IEEE80211_HT_CAP_RX_STBC_SHIFT;
+ stbc = stbc << WMI_RC_RX_STBC_FLAG_S;
+ arg->peer_rate_caps |= stbc;
+ arg->peer_flags |= WMI_PEER_STBC;
+ }
+
+ if (ht_cap->mcs.rx_mask[1] && ht_cap->mcs.rx_mask[2])
+ arg->peer_rate_caps |= WMI_RC_TS_FLAG;
+ else if (ht_cap->mcs.rx_mask[1])
+ arg->peer_rate_caps |= WMI_RC_DS_FLAG;
+
+ for (i = 0, n = 0; i < IEEE80211_HT_MCS_MASK_LEN*8; i++)
+ if (ht_cap->mcs.rx_mask[i/8] & (1 << i%8))
+ arg->peer_ht_rates.rates[n++] = i;
+
+ /*
+ * This is a workaround for HT-enabled STAs which break the spec
+ * and have no HT capabilities RX mask (no HT RX MCS map).
+ *
+ * As per spec, in section 20.3.5 Modulation and coding scheme (MCS),
+ * MCS 0 through 7 are mandatory in 20MHz with 800 ns GI at all STAs.
+ *
+ * Firmware asserts if such situation occurs.
+ */
+ if (n == 0) {
+ arg->peer_ht_rates.num_rates = 8;
+ for (i = 0; i < arg->peer_ht_rates.num_rates; i++)
+ arg->peer_ht_rates.rates[i] = i;
+ } else {
+ arg->peer_ht_rates.num_rates = n;
+ arg->peer_num_spatial_streams = sta->rx_nss;
+ }
+
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac ht peer %pM mcs cnt %d nss %d\n",
+ arg->addr,
+ arg->peer_ht_rates.num_rates,
+ arg->peer_num_spatial_streams);
+}
+
+static int ath10k_peer_assoc_qos_ap(struct ath10k *ar,
+ struct ath10k_vif *arvif,
+ struct ieee80211_sta *sta)
+{
+ u32 uapsd = 0;
+ u32 max_sp = 0;
+ int ret = 0;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ if (sta->wme && sta->uapsd_queues) {
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac uapsd_queues 0x%x max_sp %d\n",
+ sta->uapsd_queues, sta->max_sp);
+
+ if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO)
+ uapsd |= WMI_AP_PS_UAPSD_AC3_DELIVERY_EN |
+ WMI_AP_PS_UAPSD_AC3_TRIGGER_EN;
+ if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VI)
+ uapsd |= WMI_AP_PS_UAPSD_AC2_DELIVERY_EN |
+ WMI_AP_PS_UAPSD_AC2_TRIGGER_EN;
+ if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BK)
+ uapsd |= WMI_AP_PS_UAPSD_AC1_DELIVERY_EN |
+ WMI_AP_PS_UAPSD_AC1_TRIGGER_EN;
+ if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BE)
+ uapsd |= WMI_AP_PS_UAPSD_AC0_DELIVERY_EN |
+ WMI_AP_PS_UAPSD_AC0_TRIGGER_EN;
+
+ if (sta->max_sp < MAX_WMI_AP_PS_PEER_PARAM_MAX_SP)
+ max_sp = sta->max_sp;
+
+ ret = ath10k_wmi_set_ap_ps_param(ar, arvif->vdev_id,
+ sta->addr,
+ WMI_AP_PS_PEER_PARAM_UAPSD,
+ uapsd);
+ if (ret) {
+ ath10k_warn(ar, "failed to set ap ps peer param uapsd for vdev %i: %d\n",
+ arvif->vdev_id, ret);
+ return ret;
+ }
+
+ ret = ath10k_wmi_set_ap_ps_param(ar, arvif->vdev_id,
+ sta->addr,
+ WMI_AP_PS_PEER_PARAM_MAX_SP,
+ max_sp);
+ if (ret) {
+ ath10k_warn(ar, "failed to set ap ps peer param max sp for vdev %i: %d\n",
+ arvif->vdev_id, ret);
+ return ret;
+ }
+
+ /* TODO setup this based on STA listen interval and
+ beacon interval. Currently we don't know
+ sta->listen_interval - mac80211 patch required.
+ Currently use 10 seconds */
+ ret = ath10k_wmi_set_ap_ps_param(ar, arvif->vdev_id, sta->addr,
+ WMI_AP_PS_PEER_PARAM_AGEOUT_TIME,
+ 10);
+ if (ret) {
+ ath10k_warn(ar, "failed to set ap ps peer param ageout time for vdev %i: %d\n",
+ arvif->vdev_id, ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static void ath10k_peer_assoc_h_vht(struct ath10k *ar,
+ struct ieee80211_sta *sta,
+ struct wmi_peer_assoc_complete_arg *arg)
+{
+ const struct ieee80211_sta_vht_cap *vht_cap = &sta->vht_cap;
+ u8 ampdu_factor;
+
+ if (!vht_cap->vht_supported)
+ return;
+
+ arg->peer_flags |= WMI_PEER_VHT;
+
+ if (ar->hw->conf.chandef.chan->band == IEEE80211_BAND_2GHZ)
+ arg->peer_flags |= WMI_PEER_VHT_2G;
+
+ arg->peer_vht_caps = vht_cap->cap;
+
+ ampdu_factor = (vht_cap->cap &
+ IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK) >>
+ IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT;
+
+ /* Workaround: Some Netgear/Linksys 11ac APs set Rx A-MPDU factor to
+ * zero in VHT IE. Using it would result in degraded throughput.
+ * arg->peer_max_mpdu at this point contains HT max_mpdu so keep
+ * it if VHT max_mpdu is smaller. */
+ arg->peer_max_mpdu = max(arg->peer_max_mpdu,
+ (1U << (IEEE80211_HT_MAX_AMPDU_FACTOR +
+ ampdu_factor)) - 1);
+
+ if (sta->bandwidth == IEEE80211_STA_RX_BW_80)
+ arg->peer_flags |= WMI_PEER_80MHZ;
+
+ arg->peer_vht_rates.rx_max_rate =
+ __le16_to_cpu(vht_cap->vht_mcs.rx_highest);
+ arg->peer_vht_rates.rx_mcs_set =
+ __le16_to_cpu(vht_cap->vht_mcs.rx_mcs_map);
+ arg->peer_vht_rates.tx_max_rate =
+ __le16_to_cpu(vht_cap->vht_mcs.tx_highest);
+ arg->peer_vht_rates.tx_mcs_set =
+ __le16_to_cpu(vht_cap->vht_mcs.tx_mcs_map);
+
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vht peer %pM max_mpdu %d flags 0x%x\n",
+ sta->addr, arg->peer_max_mpdu, arg->peer_flags);
+}
+
+static void ath10k_peer_assoc_h_qos(struct ath10k *ar,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta,
+ struct wmi_peer_assoc_complete_arg *arg)
+{
+ struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+
+ switch (arvif->vdev_type) {
+ case WMI_VDEV_TYPE_AP:
+ if (sta->wme)
+ arg->peer_flags |= WMI_PEER_QOS;
+
+ if (sta->wme && sta->uapsd_queues) {
+ arg->peer_flags |= WMI_PEER_APSD;
+ arg->peer_rate_caps |= WMI_RC_UAPSD_FLAG;
+ }
+ break;
+ case WMI_VDEV_TYPE_STA:
+ if (vif->bss_conf.qos)
+ arg->peer_flags |= WMI_PEER_QOS;
+ break;
+ case WMI_VDEV_TYPE_IBSS:
+ if (sta->wme)
+ arg->peer_flags |= WMI_PEER_QOS;
+ break;
+ default:
+ break;
+ }
+
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac peer %pM qos %d\n",
+ sta->addr, !!(arg->peer_flags & WMI_PEER_QOS));
+}
+
+static bool ath10k_mac_sta_has_11g_rates(struct ieee80211_sta *sta)
+{
+ /* First 4 rates in ath10k_rates are CCK (11b) rates. */
+ return sta->supp_rates[IEEE80211_BAND_2GHZ] >> 4;
+}
+
+static void ath10k_peer_assoc_h_phymode(struct ath10k *ar,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta,
+ struct wmi_peer_assoc_complete_arg *arg)
+{
+ enum wmi_phy_mode phymode = MODE_UNKNOWN;
+
+ switch (ar->hw->conf.chandef.chan->band) {
+ case IEEE80211_BAND_2GHZ:
+ if (sta->vht_cap.vht_supported) {
+ if (sta->bandwidth == IEEE80211_STA_RX_BW_40)
+ phymode = MODE_11AC_VHT40;
+ else
+ phymode = MODE_11AC_VHT20;
+ } else if (sta->ht_cap.ht_supported) {
+ if (sta->bandwidth == IEEE80211_STA_RX_BW_40)
+ phymode = MODE_11NG_HT40;
+ else
+ phymode = MODE_11NG_HT20;
+ } else if (ath10k_mac_sta_has_11g_rates(sta)) {
+ phymode = MODE_11G;
+ } else {
+ phymode = MODE_11B;
+ }
+
+ break;
+ case IEEE80211_BAND_5GHZ:
+ /*
+ * Check VHT first.
+ */
+ if (sta->vht_cap.vht_supported) {
+ if (sta->bandwidth == IEEE80211_STA_RX_BW_80)
+ phymode = MODE_11AC_VHT80;
+ else if (sta->bandwidth == IEEE80211_STA_RX_BW_40)
+ phymode = MODE_11AC_VHT40;
+ else if (sta->bandwidth == IEEE80211_STA_RX_BW_20)
+ phymode = MODE_11AC_VHT20;
+ } else if (sta->ht_cap.ht_supported) {
+ if (sta->bandwidth == IEEE80211_STA_RX_BW_40)
+ phymode = MODE_11NA_HT40;
+ else
+ phymode = MODE_11NA_HT20;
+ } else {
+ phymode = MODE_11A;
+ }
+
+ break;
+ default:
+ break;
+ }
+
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac peer %pM phymode %s\n",
+ sta->addr, ath10k_wmi_phymode_str(phymode));
+
+ arg->peer_phymode = phymode;
+ WARN_ON(phymode == MODE_UNKNOWN);
+}
+
+static int ath10k_peer_assoc_prepare(struct ath10k *ar,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta,
+ struct wmi_peer_assoc_complete_arg *arg)
+{
+ lockdep_assert_held(&ar->conf_mutex);
+
+ memset(arg, 0, sizeof(*arg));
+
+ ath10k_peer_assoc_h_basic(ar, vif, sta, arg);
+ ath10k_peer_assoc_h_crypto(ar, vif, arg);
+ ath10k_peer_assoc_h_rates(ar, sta, arg);
+ ath10k_peer_assoc_h_ht(ar, sta, arg);
+ ath10k_peer_assoc_h_vht(ar, sta, arg);
+ ath10k_peer_assoc_h_qos(ar, vif, sta, arg);
+ ath10k_peer_assoc_h_phymode(ar, vif, sta, arg);
+
+ return 0;
+}
+
+static const u32 ath10k_smps_map[] = {
+ [WLAN_HT_CAP_SM_PS_STATIC] = WMI_PEER_SMPS_STATIC,
+ [WLAN_HT_CAP_SM_PS_DYNAMIC] = WMI_PEER_SMPS_DYNAMIC,
+ [WLAN_HT_CAP_SM_PS_INVALID] = WMI_PEER_SMPS_PS_NONE,
+ [WLAN_HT_CAP_SM_PS_DISABLED] = WMI_PEER_SMPS_PS_NONE,
+};
+
+static int ath10k_setup_peer_smps(struct ath10k *ar, struct ath10k_vif *arvif,
+ const u8 *addr,
+ const struct ieee80211_sta_ht_cap *ht_cap)
+{
+ int smps;
+
+ if (!ht_cap->ht_supported)
+ return 0;
+
+ smps = ht_cap->cap & IEEE80211_HT_CAP_SM_PS;
+ smps >>= IEEE80211_HT_CAP_SM_PS_SHIFT;
+
+ if (smps >= ARRAY_SIZE(ath10k_smps_map))
+ return -EINVAL;
+
+ return ath10k_wmi_peer_set_param(ar, arvif->vdev_id, addr,
+ WMI_PEER_SMPS_STATE,
+ ath10k_smps_map[smps]);
+}
+
+static int ath10k_mac_vif_recalc_txbf(struct ath10k *ar,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta_vht_cap vht_cap)
+{
+ struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+ int ret;
+ u32 param;
+ u32 value;
+
+ if (!(ar->vht_cap_info &
+ (IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
+ IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE |
+ IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE |
+ IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE)))
+ return 0;
+
+ param = ar->wmi.vdev_param->txbf;
+ value = 0;
+
+ if (WARN_ON(param == WMI_VDEV_PARAM_UNSUPPORTED))
+ return 0;
+
+ /* The following logic is correct. If a remote STA advertises support
+ * for being a beamformer then we should enable us being a beamformee.
+ */
+
+ if (ar->vht_cap_info &
+ (IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
+ IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE)) {
+ if (vht_cap.cap & IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE)
+ value |= WMI_VDEV_PARAM_TXBF_SU_TX_BFEE;
+
+ if (vht_cap.cap & IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE)
+ value |= WMI_VDEV_PARAM_TXBF_MU_TX_BFEE;
+ }
+
+ if (ar->vht_cap_info &
+ (IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE |
+ IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE)) {
+ if (vht_cap.cap & IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE)
+ value |= WMI_VDEV_PARAM_TXBF_SU_TX_BFER;
+
+ if (vht_cap.cap & IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE)
+ value |= WMI_VDEV_PARAM_TXBF_MU_TX_BFER;
+ }
+
+ if (value & WMI_VDEV_PARAM_TXBF_MU_TX_BFEE)
+ value |= WMI_VDEV_PARAM_TXBF_SU_TX_BFEE;
+
+ if (value & WMI_VDEV_PARAM_TXBF_MU_TX_BFER)
+ value |= WMI_VDEV_PARAM_TXBF_SU_TX_BFER;
+
+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, param, value);
+ if (ret) {
+ ath10k_warn(ar, "failed to submit vdev param txbf 0x%x: %d\n",
+ value, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+/* can be called only in mac80211 callbacks due to `key_count` usage */
+static void ath10k_bss_assoc(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_bss_conf *bss_conf)
+{
+ struct ath10k *ar = hw->priv;
+ struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+ struct ieee80211_sta_ht_cap ht_cap;
+ struct ieee80211_sta_vht_cap vht_cap;
+ struct wmi_peer_assoc_complete_arg peer_arg;
+ struct ieee80211_sta *ap_sta;
+ int ret;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %i assoc bssid %pM aid %d\n",
+ arvif->vdev_id, arvif->bssid, arvif->aid);
+
+ rcu_read_lock();
+
+ ap_sta = ieee80211_find_sta(vif, bss_conf->bssid);
+ if (!ap_sta) {
+ ath10k_warn(ar, "failed to find station entry for bss %pM vdev %i\n",
+ bss_conf->bssid, arvif->vdev_id);
+ rcu_read_unlock();
+ return;
+ }
+
+ /* ap_sta must be accessed only within rcu section which must be left
+ * before calling ath10k_setup_peer_smps() which might sleep. */
+ ht_cap = ap_sta->ht_cap;
+ vht_cap = ap_sta->vht_cap;
+
+ ret = ath10k_peer_assoc_prepare(ar, vif, ap_sta, &peer_arg);
+ if (ret) {
+ ath10k_warn(ar, "failed to prepare peer assoc for %pM vdev %i: %d\n",
+ bss_conf->bssid, arvif->vdev_id, ret);
+ rcu_read_unlock();
+ return;
+ }
+
+ rcu_read_unlock();
+
+ ret = ath10k_wmi_peer_assoc(ar, &peer_arg);
+ if (ret) {
+ ath10k_warn(ar, "failed to run peer assoc for %pM vdev %i: %d\n",
+ bss_conf->bssid, arvif->vdev_id, ret);
+ return;
+ }
+
+ ret = ath10k_setup_peer_smps(ar, arvif, bss_conf->bssid, &ht_cap);
+ if (ret) {
+ ath10k_warn(ar, "failed to setup peer SMPS for vdev %i: %d\n",
+ arvif->vdev_id, ret);
+ return;
+ }
+
+ ret = ath10k_mac_vif_recalc_txbf(ar, vif, vht_cap);
+ if (ret) {
+ ath10k_warn(ar, "failed to recalc txbf for vdev %i on bss %pM: %d\n",
+ arvif->vdev_id, bss_conf->bssid, ret);
+ return;
+ }
+
+ ath10k_dbg(ar, ATH10K_DBG_MAC,
+ "mac vdev %d up (associated) bssid %pM aid %d\n",
+ arvif->vdev_id, bss_conf->bssid, bss_conf->aid);
+
+ WARN_ON(arvif->is_up);
+
+ arvif->aid = bss_conf->aid;
+ ether_addr_copy(arvif->bssid, bss_conf->bssid);
+
+ ret = ath10k_wmi_vdev_up(ar, arvif->vdev_id, arvif->aid, arvif->bssid);
+ if (ret) {
+ ath10k_warn(ar, "failed to set vdev %d up: %d\n",
+ arvif->vdev_id, ret);
+ return;
+ }
+
+ arvif->is_up = true;
+
+ /* Workaround: Some firmware revisions (tested with qca6174
+ * WLAN.RM.2.0-00073) have buggy powersave state machine and must be
+ * poked with peer param command.
+ */
+ ret = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, arvif->bssid,
+ WMI_PEER_DUMMY_VAR, 1);
+ if (ret) {
+ ath10k_warn(ar, "failed to poke peer %pM param for ps workaround on vdev %i: %d\n",
+ arvif->bssid, arvif->vdev_id, ret);
+ return;
+ }
+}
+
+static void ath10k_bss_disassoc(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif)
+{
+ struct ath10k *ar = hw->priv;
+ struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+ struct ieee80211_sta_vht_cap vht_cap = {};
+ int ret;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %i disassoc bssid %pM\n",
+ arvif->vdev_id, arvif->bssid);
+
+ ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id);
+ if (ret)
+ ath10k_warn(ar, "faield to down vdev %i: %d\n",
+ arvif->vdev_id, ret);
+
+ arvif->def_wep_key_idx = -1;
+
+ ret = ath10k_mac_vif_recalc_txbf(ar, vif, vht_cap);
+ if (ret) {
+ ath10k_warn(ar, "failed to recalc txbf for vdev %i: %d\n",
+ arvif->vdev_id, ret);
+ return;
+ }
+
+ arvif->is_up = false;
+}
+
+static int ath10k_station_assoc(struct ath10k *ar,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta,
+ bool reassoc)
+{
+ struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+ struct wmi_peer_assoc_complete_arg peer_arg;
+ int ret = 0;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ ret = ath10k_peer_assoc_prepare(ar, vif, sta, &peer_arg);
+ if (ret) {
+ ath10k_warn(ar, "failed to prepare WMI peer assoc for %pM vdev %i: %i\n",
+ sta->addr, arvif->vdev_id, ret);
+ return ret;
+ }
+
+ peer_arg.peer_reassoc = reassoc;
+ ret = ath10k_wmi_peer_assoc(ar, &peer_arg);
+ if (ret) {
+ ath10k_warn(ar, "failed to run peer assoc for STA %pM vdev %i: %d\n",
+ sta->addr, arvif->vdev_id, ret);
+ return ret;
+ }
+
+ /* Re-assoc is run only to update supported rates for given station. It
+ * doesn't make much sense to reconfigure the peer completely.
+ */
+ if (!reassoc) {
+ ret = ath10k_setup_peer_smps(ar, arvif, sta->addr,
+ &sta->ht_cap);
+ if (ret) {
+ ath10k_warn(ar, "failed to setup peer SMPS for vdev %d: %d\n",
+ arvif->vdev_id, ret);
+ return ret;
+ }
+
+ ret = ath10k_peer_assoc_qos_ap(ar, arvif, sta);
+ if (ret) {
+ ath10k_warn(ar, "failed to set qos params for STA %pM for vdev %i: %d\n",
+ sta->addr, arvif->vdev_id, ret);
+ return ret;
+ }
+
+ if (!sta->wme) {
+ arvif->num_legacy_stations++;
+ ret = ath10k_recalc_rtscts_prot(arvif);
+ if (ret) {
+ ath10k_warn(ar, "failed to recalculate rts/cts prot for vdev %d: %d\n",
+ arvif->vdev_id, ret);
+ return ret;
+ }
+ }
+
+ /* Plumb cached keys only for static WEP */
+ if (arvif->def_wep_key_idx != -1) {
+ ret = ath10k_install_peer_wep_keys(arvif, sta->addr);
+ if (ret) {
+ ath10k_warn(ar, "failed to install peer wep keys for vdev %i: %d\n",
+ arvif->vdev_id, ret);
+ return ret;
+ }
+ }
+ }
+
+ return ret;
+}
+
+static int ath10k_station_disassoc(struct ath10k *ar,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta)
+{
+ struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+ int ret = 0;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ if (!sta->wme) {
+ arvif->num_legacy_stations--;
+ ret = ath10k_recalc_rtscts_prot(arvif);
+ if (ret) {
+ ath10k_warn(ar, "failed to recalculate rts/cts prot for vdev %d: %d\n",
+ arvif->vdev_id, ret);
+ return ret;
+ }
+ }
+
+ ret = ath10k_clear_peer_keys(arvif, sta->addr);
+ if (ret) {
+ ath10k_warn(ar, "failed to clear all peer wep keys for vdev %i: %d\n",
+ arvif->vdev_id, ret);
+ return ret;
+ }
+
+ return ret;
+}
+
+/**************/
+/* Regulatory */
+/**************/
+
+static int ath10k_update_channel_list(struct ath10k *ar)
+{
+ struct ieee80211_hw *hw = ar->hw;
+ struct ieee80211_supported_band **bands;
+ enum ieee80211_band band;
+ struct ieee80211_channel *channel;
+ struct wmi_scan_chan_list_arg arg = {0};
+ struct wmi_channel_arg *ch;
+ bool passive;
+ int len;
+ int ret;
+ int i;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ bands = hw->wiphy->bands;
+ for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+ if (!bands[band])
+ continue;
+
+ for (i = 0; i < bands[band]->n_channels; i++) {
+ if (bands[band]->channels[i].flags &
+ IEEE80211_CHAN_DISABLED)
+ continue;
+
+ arg.n_channels++;
+ }
+ }
+
+ len = sizeof(struct wmi_channel_arg) * arg.n_channels;
+ arg.channels = kzalloc(len, GFP_KERNEL);
+ if (!arg.channels)
+ return -ENOMEM;
+
+ ch = arg.channels;
+ for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+ if (!bands[band])
+ continue;
+
+ for (i = 0; i < bands[band]->n_channels; i++) {
+ channel = &bands[band]->channels[i];
+
+ if (channel->flags & IEEE80211_CHAN_DISABLED)
+ continue;
+
+ ch->allow_ht = true;
+
+ /* FIXME: when should we really allow VHT? */
+ ch->allow_vht = true;
+
+ ch->allow_ibss =
+ !(channel->flags & IEEE80211_CHAN_NO_IR);
+
+ ch->ht40plus =
+ !(channel->flags & IEEE80211_CHAN_NO_HT40PLUS);
+
+ ch->chan_radar =
+ !!(channel->flags & IEEE80211_CHAN_RADAR);
+
+ passive = channel->flags & IEEE80211_CHAN_NO_IR;
+ ch->passive = passive;
+
+ ch->freq = channel->center_freq;
+ ch->band_center_freq1 = channel->center_freq;
+ ch->min_power = 0;
+ ch->max_power = channel->max_power * 2;
+ ch->max_reg_power = channel->max_reg_power * 2;
+ ch->max_antenna_gain = channel->max_antenna_gain * 2;
+ ch->reg_class_id = 0; /* FIXME */
+
+ /* FIXME: why use only legacy modes, why not any
+ * HT/VHT modes? Would that even make any
+ * difference? */
+ if (channel->band == IEEE80211_BAND_2GHZ)
+ ch->mode = MODE_11G;
+ else
+ ch->mode = MODE_11A;
+
+ if (WARN_ON_ONCE(ch->mode == MODE_UNKNOWN))
+ continue;
+
+ ath10k_dbg(ar, ATH10K_DBG_WMI,
+ "mac channel [%zd/%d] freq %d maxpower %d regpower %d antenna %d mode %d\n",
+ ch - arg.channels, arg.n_channels,
+ ch->freq, ch->max_power, ch->max_reg_power,
+ ch->max_antenna_gain, ch->mode);
+
+ ch++;
+ }
+ }
+
+ ret = ath10k_wmi_scan_chan_list(ar, &arg);
+ kfree(arg.channels);
+
+ return ret;
+}
+
+static enum wmi_dfs_region
+ath10k_mac_get_dfs_region(enum nl80211_dfs_regions dfs_region)
+{
+ switch (dfs_region) {
+ case NL80211_DFS_UNSET:
+ return WMI_UNINIT_DFS_DOMAIN;
+ case NL80211_DFS_FCC:
+ return WMI_FCC_DFS_DOMAIN;
+ case NL80211_DFS_ETSI:
+ return WMI_ETSI_DFS_DOMAIN;
+ case NL80211_DFS_JP:
+ return WMI_MKK4_DFS_DOMAIN;
+ }
+ return WMI_UNINIT_DFS_DOMAIN;
+}
+
+static void ath10k_regd_update(struct ath10k *ar)
+{
+ struct reg_dmn_pair_mapping *regpair;
+ int ret;
+ enum wmi_dfs_region wmi_dfs_reg;
+ enum nl80211_dfs_regions nl_dfs_reg;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ ret = ath10k_update_channel_list(ar);
+ if (ret)
+ ath10k_warn(ar, "failed to update channel list: %d\n", ret);
+
+ regpair = ar->ath_common.regulatory.regpair;
+
+ if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector) {
+ nl_dfs_reg = ar->dfs_detector->region;
+ wmi_dfs_reg = ath10k_mac_get_dfs_region(nl_dfs_reg);
+ } else {
+ wmi_dfs_reg = WMI_UNINIT_DFS_DOMAIN;
+ }
+
+ /* Target allows setting up per-band regdomain but ath_common provides
+ * a combined one only */
+ ret = ath10k_wmi_pdev_set_regdomain(ar,
+ regpair->reg_domain,
+ regpair->reg_domain, /* 2ghz */
+ regpair->reg_domain, /* 5ghz */
+ regpair->reg_2ghz_ctl,
+ regpair->reg_5ghz_ctl,
+ wmi_dfs_reg);
+ if (ret)
+ ath10k_warn(ar, "failed to set pdev regdomain: %d\n", ret);
+}
+
+static void ath10k_reg_notifier(struct wiphy *wiphy,
+ struct regulatory_request *request)
+{
+ struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
+ struct ath10k *ar = hw->priv;
+ bool result;
+
+ ath_reg_notifier_apply(wiphy, request, &ar->ath_common.regulatory);
+
+ if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector) {
+ ath10k_dbg(ar, ATH10K_DBG_REGULATORY, "dfs region 0x%x\n",
+ request->dfs_region);
+ result = ar->dfs_detector->set_dfs_domain(ar->dfs_detector,
+ request->dfs_region);
+ if (!result)
+ ath10k_warn(ar, "DFS region 0x%X not supported, will trigger radar for every pulse\n",
+ request->dfs_region);
+ }
+
+ mutex_lock(&ar->conf_mutex);
+ if (ar->state == ATH10K_STATE_ON)
+ ath10k_regd_update(ar);
+ mutex_unlock(&ar->conf_mutex);
+}
+
+/***************/
+/* TX handlers */
+/***************/
+
+static u8 ath10k_tx_h_get_tid(struct ieee80211_hdr *hdr)
+{
+ if (ieee80211_is_mgmt(hdr->frame_control))
+ return HTT_DATA_TX_EXT_TID_MGMT;
+
+ if (!ieee80211_is_data_qos(hdr->frame_control))
+ return HTT_DATA_TX_EXT_TID_NON_QOS_MCAST_BCAST;
+
+ if (!is_unicast_ether_addr(ieee80211_get_DA(hdr)))
+ return HTT_DATA_TX_EXT_TID_NON_QOS_MCAST_BCAST;
+
+ return ieee80211_get_qos_ctl(hdr)[0] & IEEE80211_QOS_CTL_TID_MASK;
+}
+
+static u8 ath10k_tx_h_get_vdev_id(struct ath10k *ar, struct ieee80211_vif *vif)
+{
+ if (vif)
+ return ath10k_vif_to_arvif(vif)->vdev_id;
+
+ if (ar->monitor_started)
+ return ar->monitor_vdev_id;
+
+ ath10k_warn(ar, "failed to resolve vdev id\n");
+ return 0;
+}
+
+/* HTT Tx uses Native Wifi tx mode which expects 802.11 frames without QoS
+ * Control in the header.
+ */
+static void ath10k_tx_h_nwifi(struct ieee80211_hw *hw, struct sk_buff *skb)
+{
+ struct ieee80211_hdr *hdr = (void *)skb->data;
+ struct ath10k_skb_cb *cb = ATH10K_SKB_CB(skb);
+ u8 *qos_ctl;
+
+ if (!ieee80211_is_data_qos(hdr->frame_control))
+ return;
+
+ qos_ctl = ieee80211_get_qos_ctl(hdr);
+ memmove(skb->data + IEEE80211_QOS_CTL_LEN,
+ skb->data, (void *)qos_ctl - (void *)skb->data);
+ skb_pull(skb, IEEE80211_QOS_CTL_LEN);
+
+ /* Fw/Hw generates a corrupted QoS Control Field for QoS NullFunc
+ * frames. Powersave is handled by the fw/hw so QoS NyllFunc frames are
+ * used only for CQM purposes (e.g. hostapd station keepalive ping) so
+ * it is safe to downgrade to NullFunc.
+ */
+ hdr = (void *)skb->data;
+ if (ieee80211_is_qos_nullfunc(hdr->frame_control)) {
+ hdr->frame_control &= ~__cpu_to_le16(IEEE80211_STYPE_QOS_DATA);
+ cb->htt.tid = HTT_DATA_TX_EXT_TID_NON_QOS_MCAST_BCAST;
+ }
+}
+
+static void ath10k_tx_h_add_p2p_noa_ie(struct ath10k *ar,
+ struct ieee80211_vif *vif,
+ struct sk_buff *skb)
+{
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+ struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+
+ /* This is case only for P2P_GO */
+ if (arvif->vdev_type != WMI_VDEV_TYPE_AP ||
+ arvif->vdev_subtype != WMI_VDEV_SUBTYPE_P2P_GO)
+ return;
+
+ if (unlikely(ieee80211_is_probe_resp(hdr->frame_control))) {
+ spin_lock_bh(&ar->data_lock);
+ if (arvif->u.ap.noa_data)
+ if (!pskb_expand_head(skb, 0, arvif->u.ap.noa_len,
+ GFP_ATOMIC))
+ memcpy(skb_put(skb, arvif->u.ap.noa_len),
+ arvif->u.ap.noa_data,
+ arvif->u.ap.noa_len);
+ spin_unlock_bh(&ar->data_lock);
+ }
+}
+
+static bool ath10k_mac_need_offchan_tx_work(struct ath10k *ar)
+{
+ /* FIXME: Not really sure since when the behaviour changed. At some
+ * point new firmware stopped requiring creation of peer entries for
+ * offchannel tx (and actually creating them causes issues with wmi-htc
+ * tx credit replenishment and reliability). Assuming it's at least 3.4
+ * because that's when the `freq` was introduced to TX_FRM HTT command.
+ */
+ return !(ar->htt.target_version_major >= 3 &&
+ ar->htt.target_version_minor >= 4);
+}
+
+static void ath10k_tx_htt(struct ath10k *ar, struct sk_buff *skb)
+{
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+ int ret = 0;
+
+ if (ar->htt.target_version_major >= 3) {
+ /* Since HTT 3.0 there is no separate mgmt tx command */
+ ret = ath10k_htt_tx(&ar->htt, skb);
+ goto exit;
+ }
+
+ if (ieee80211_is_mgmt(hdr->frame_control)) {
+ if (test_bit(ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX,
+ ar->fw_features)) {
+ if (skb_queue_len(&ar->wmi_mgmt_tx_queue) >=
+ ATH10K_MAX_NUM_MGMT_PENDING) {
+ ath10k_warn(ar, "reached WMI management transmit queue limit\n");
+ ret = -EBUSY;
+ goto exit;
+ }
+
+ skb_queue_tail(&ar->wmi_mgmt_tx_queue, skb);
+ ieee80211_queue_work(ar->hw, &ar->wmi_mgmt_tx_work);
+ } else {
+ ret = ath10k_htt_mgmt_tx(&ar->htt, skb);
+ }
+ } else if (!test_bit(ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX,
+ ar->fw_features) &&
+ ieee80211_is_nullfunc(hdr->frame_control)) {
+ /* FW does not report tx status properly for NullFunc frames
+ * unless they are sent through mgmt tx path. mac80211 sends
+ * those frames when it detects link/beacon loss and depends
+ * on the tx status to be correct. */
+ ret = ath10k_htt_mgmt_tx(&ar->htt, skb);
+ } else {
+ ret = ath10k_htt_tx(&ar->htt, skb);
+ }
+
+exit:
+ if (ret) {
+ ath10k_warn(ar, "failed to transmit packet, dropping: %d\n",
+ ret);
+ ieee80211_free_txskb(ar->hw, skb);
+ }
+}
+
+void ath10k_offchan_tx_purge(struct ath10k *ar)
+{
+ struct sk_buff *skb;
+
+ for (;;) {
+ skb = skb_dequeue(&ar->offchan_tx_queue);
+ if (!skb)
+ break;
+
+ ieee80211_free_txskb(ar->hw, skb);
+ }
+}
+
+void ath10k_offchan_tx_work(struct work_struct *work)
+{
+ struct ath10k *ar = container_of(work, struct ath10k, offchan_tx_work);
+ struct ath10k_peer *peer;
+ struct ieee80211_hdr *hdr;
+ struct sk_buff *skb;
+ const u8 *peer_addr;
+ int vdev_id;
+ int ret;
+
+ /* FW requirement: We must create a peer before FW will send out
+ * an offchannel frame. Otherwise the frame will be stuck and
+ * never transmitted. We delete the peer upon tx completion.
+ * It is unlikely that a peer for offchannel tx will already be
+ * present. However it may be in some rare cases so account for that.
+ * Otherwise we might remove a legitimate peer and break stuff. */
+
+ for (;;) {
+ skb = skb_dequeue(&ar->offchan_tx_queue);
+ if (!skb)
+ break;
+
+ mutex_lock(&ar->conf_mutex);
+
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac offchannel skb %p\n",
+ skb);
+
+ hdr = (struct ieee80211_hdr *)skb->data;
+ peer_addr = ieee80211_get_DA(hdr);
+ vdev_id = ATH10K_SKB_CB(skb)->vdev_id;
+
+ spin_lock_bh(&ar->data_lock);
+ peer = ath10k_peer_find(ar, vdev_id, peer_addr);
+ spin_unlock_bh(&ar->data_lock);
+
+ if (peer)
+ /* FIXME: should this use ath10k_warn()? */
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "peer %pM on vdev %d already present\n",
+ peer_addr, vdev_id);
+
+ if (!peer) {
+ ret = ath10k_peer_create(ar, vdev_id, peer_addr);
+ if (ret)
+ ath10k_warn(ar, "failed to create peer %pM on vdev %d: %d\n",
+ peer_addr, vdev_id, ret);
+ }
+
+ spin_lock_bh(&ar->data_lock);
+ reinit_completion(&ar->offchan_tx_completed);
+ ar->offchan_tx_skb = skb;
+ spin_unlock_bh(&ar->data_lock);
+
+ ath10k_tx_htt(ar, skb);
+
+ ret = wait_for_completion_timeout(&ar->offchan_tx_completed,
+ 3 * HZ);
+ if (ret == 0)
+ ath10k_warn(ar, "timed out waiting for offchannel skb %p\n",
+ skb);
+
+ if (!peer) {
+ ret = ath10k_peer_delete(ar, vdev_id, peer_addr);
+ if (ret)
+ ath10k_warn(ar, "failed to delete peer %pM on vdev %d: %d\n",
+ peer_addr, vdev_id, ret);
+ }
+
+ mutex_unlock(&ar->conf_mutex);
+ }
+}
+
+void ath10k_mgmt_over_wmi_tx_purge(struct ath10k *ar)
+{
+ struct sk_buff *skb;
+
+ for (;;) {
+ skb = skb_dequeue(&ar->wmi_mgmt_tx_queue);
+ if (!skb)
+ break;
+
+ ieee80211_free_txskb(ar->hw, skb);
+ }
+}
+
+void ath10k_mgmt_over_wmi_tx_work(struct work_struct *work)
+{
+ struct ath10k *ar = container_of(work, struct ath10k, wmi_mgmt_tx_work);
+ struct sk_buff *skb;
+ int ret;
+
+ for (;;) {
+ skb = skb_dequeue(&ar->wmi_mgmt_tx_queue);
+ if (!skb)
+ break;
+
+ ret = ath10k_wmi_mgmt_tx(ar, skb);
+ if (ret) {
+ ath10k_warn(ar, "failed to transmit management frame via WMI: %d\n",
+ ret);
+ ieee80211_free_txskb(ar->hw, skb);
+ }
+ }
+}
+
+/************/
+/* Scanning */
+/************/
+
+void __ath10k_scan_finish(struct ath10k *ar)
+{
+ lockdep_assert_held(&ar->data_lock);
+
+ switch (ar->scan.state) {
+ case ATH10K_SCAN_IDLE:
+ break;
+ case ATH10K_SCAN_RUNNING:
+ if (ar->scan.is_roc)
+ ieee80211_remain_on_channel_expired(ar->hw);
+ /* fall through */
+ case ATH10K_SCAN_ABORTING:
+ if (!ar->scan.is_roc)
+ ieee80211_scan_completed(ar->hw,
+ (ar->scan.state ==
+ ATH10K_SCAN_ABORTING));
+ /* fall through */
+ case ATH10K_SCAN_STARTING:
+ ar->scan.state = ATH10K_SCAN_IDLE;
+ ar->scan_channel = NULL;
+ ath10k_offchan_tx_purge(ar);
+ cancel_delayed_work(&ar->scan.timeout);
+ complete_all(&ar->scan.completed);
+ break;
+ }
+}
+
+void ath10k_scan_finish(struct ath10k *ar)
+{
+ spin_lock_bh(&ar->data_lock);
+ __ath10k_scan_finish(ar);
+ spin_unlock_bh(&ar->data_lock);
+}
+
+static int ath10k_scan_stop(struct ath10k *ar)
+{
+ struct wmi_stop_scan_arg arg = {
+ .req_id = 1, /* FIXME */
+ .req_type = WMI_SCAN_STOP_ONE,
+ .u.scan_id = ATH10K_SCAN_ID,
+ };
+ int ret;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ ret = ath10k_wmi_stop_scan(ar, &arg);
+ if (ret) {
+ ath10k_warn(ar, "failed to stop wmi scan: %d\n", ret);
+ goto out;
+ }
+
+ ret = wait_for_completion_timeout(&ar->scan.completed, 3*HZ);
+ if (ret == 0) {
+ ath10k_warn(ar, "failed to receive scan abortion completion: timed out\n");
+ ret = -ETIMEDOUT;
+ } else if (ret > 0) {
+ ret = 0;
+ }
+
+out:
+ /* Scan state should be updated upon scan completion but in case
+ * firmware fails to deliver the event (for whatever reason) it is
+ * desired to clean up scan state anyway. Firmware may have just
+ * dropped the scan completion event delivery due to transport pipe
+ * being overflown with data and/or it can recover on its own before
+ * next scan request is submitted.
+ */
+ spin_lock_bh(&ar->data_lock);
+ if (ar->scan.state != ATH10K_SCAN_IDLE)
+ __ath10k_scan_finish(ar);
+ spin_unlock_bh(&ar->data_lock);
+
+ return ret;
+}
+
+static void ath10k_scan_abort(struct ath10k *ar)
+{
+ int ret;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ spin_lock_bh(&ar->data_lock);
+
+ switch (ar->scan.state) {
+ case ATH10K_SCAN_IDLE:
+ /* This can happen if timeout worker kicked in and called
+ * abortion while scan completion was being processed.
+ */
+ break;
+ case ATH10K_SCAN_STARTING:
+ case ATH10K_SCAN_ABORTING:
+ ath10k_warn(ar, "refusing scan abortion due to invalid scan state: %s (%d)\n",
+ ath10k_scan_state_str(ar->scan.state),
+ ar->scan.state);
+ break;
+ case ATH10K_SCAN_RUNNING:
+ ar->scan.state = ATH10K_SCAN_ABORTING;
+ spin_unlock_bh(&ar->data_lock);
+
+ ret = ath10k_scan_stop(ar);
+ if (ret)
+ ath10k_warn(ar, "failed to abort scan: %d\n", ret);
+
+ spin_lock_bh(&ar->data_lock);
+ break;
+ }
+
+ spin_unlock_bh(&ar->data_lock);
+}
+
+void ath10k_scan_timeout_work(struct work_struct *work)
+{
+ struct ath10k *ar = container_of(work, struct ath10k,
+ scan.timeout.work);
+
+ mutex_lock(&ar->conf_mutex);
+ ath10k_scan_abort(ar);
+ mutex_unlock(&ar->conf_mutex);
+}
+
+static int ath10k_start_scan(struct ath10k *ar,
+ const struct wmi_start_scan_arg *arg)
+{
+ int ret;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ ret = ath10k_wmi_start_scan(ar, arg);
+ if (ret)
+ return ret;
+
+ ret = wait_for_completion_timeout(&ar->scan.started, 1*HZ);
+ if (ret == 0) {
+ ret = ath10k_scan_stop(ar);
+ if (ret)
+ ath10k_warn(ar, "failed to stop scan: %d\n", ret);
+
+ return -ETIMEDOUT;
+ }
+
+ /* If we failed to start the scan, return error code at
+ * this point. This is probably due to some issue in the
+ * firmware, but no need to wedge the driver due to that...
+ */
+ spin_lock_bh(&ar->data_lock);
+ if (ar->scan.state == ATH10K_SCAN_IDLE) {
+ spin_unlock_bh(&ar->data_lock);
+ return -EINVAL;
+ }
+ spin_unlock_bh(&ar->data_lock);
+
+ /* Add a 200ms margin to account for event/command processing */
+ ieee80211_queue_delayed_work(ar->hw, &ar->scan.timeout,
+ msecs_to_jiffies(arg->max_scan_time+200));
+ return 0;
+}
+
+/**********************/
+/* mac80211 callbacks */
+/**********************/
+
+static void ath10k_tx(struct ieee80211_hw *hw,
+ struct ieee80211_tx_control *control,
+ struct sk_buff *skb)
+{
+ struct ath10k *ar = hw->priv;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct ieee80211_vif *vif = info->control.vif;
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+
+ /* We should disable CCK RATE due to P2P */
+ if (info->flags & IEEE80211_TX_CTL_NO_CCK_RATE)
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "IEEE80211_TX_CTL_NO_CCK_RATE\n");
+
+ ATH10K_SKB_CB(skb)->htt.is_offchan = false;
+ ATH10K_SKB_CB(skb)->htt.tid = ath10k_tx_h_get_tid(hdr);
+ ATH10K_SKB_CB(skb)->vdev_id = ath10k_tx_h_get_vdev_id(ar, vif);
+
+ /* it makes no sense to process injected frames like that */
+ if (vif && vif->type != NL80211_IFTYPE_MONITOR) {
+ ath10k_tx_h_nwifi(hw, skb);
+ ath10k_tx_h_add_p2p_noa_ie(ar, vif, skb);
+ ath10k_tx_h_seq_no(vif, skb);
+ }
+
+ if (info->flags & IEEE80211_TX_CTL_TX_OFFCHAN) {
+ spin_lock_bh(&ar->data_lock);
+ ATH10K_SKB_CB(skb)->htt.freq = ar->scan.roc_freq;
+ ATH10K_SKB_CB(skb)->vdev_id = ar->scan.vdev_id;
+ spin_unlock_bh(&ar->data_lock);
+
+ if (ath10k_mac_need_offchan_tx_work(ar)) {
+ ATH10K_SKB_CB(skb)->htt.freq = 0;
+ ATH10K_SKB_CB(skb)->htt.is_offchan = true;
+
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "queued offchannel skb %p\n",
+ skb);
+
+ skb_queue_tail(&ar->offchan_tx_queue, skb);
+ ieee80211_queue_work(hw, &ar->offchan_tx_work);
+ return;
+ }
+ }
+
+ ath10k_tx_htt(ar, skb);
+}
+
+/* Must not be called with conf_mutex held as workers can use that also. */
+void ath10k_drain_tx(struct ath10k *ar)
+{
+ /* make sure rcu-protected mac80211 tx path itself is drained */
+ synchronize_net();
+
+ ath10k_offchan_tx_purge(ar);
+ ath10k_mgmt_over_wmi_tx_purge(ar);
+
+ cancel_work_sync(&ar->offchan_tx_work);
+ cancel_work_sync(&ar->wmi_mgmt_tx_work);
+}
+
+void ath10k_halt(struct ath10k *ar)
+{
+ struct ath10k_vif *arvif;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ clear_bit(ATH10K_CAC_RUNNING, &ar->dev_flags);
+ ar->filter_flags = 0;
+ ar->monitor = false;
+
+ if (ar->monitor_started)
+ ath10k_monitor_stop(ar);
+
+ ar->monitor_started = false;
+
+ ath10k_scan_finish(ar);
+ ath10k_peer_cleanup_all(ar);
+ ath10k_core_stop(ar);
+ ath10k_hif_power_down(ar);
+
+ spin_lock_bh(&ar->data_lock);
+ list_for_each_entry(arvif, &ar->arvifs, list)
+ ath10k_mac_vif_beacon_cleanup(arvif);
+ spin_unlock_bh(&ar->data_lock);
+}
+
+static int ath10k_get_antenna(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant)
+{
+ struct ath10k *ar = hw->priv;
+
+ mutex_lock(&ar->conf_mutex);
+
+ if (ar->cfg_tx_chainmask) {
+ *tx_ant = ar->cfg_tx_chainmask;
+ *rx_ant = ar->cfg_rx_chainmask;
+ } else {
+ *tx_ant = ar->supp_tx_chainmask;
+ *rx_ant = ar->supp_rx_chainmask;
+ }
+
+ mutex_unlock(&ar->conf_mutex);
+
+ return 0;
+}
+
+static void ath10k_check_chain_mask(struct ath10k *ar, u32 cm, const char *dbg)
+{
+ /* It is not clear that allowing gaps in chainmask
+ * is helpful. Probably it will not do what user
+ * is hoping for, so warn in that case.
+ */
+ if (cm == 15 || cm == 7 || cm == 3 || cm == 1 || cm == 0)
+ return;
+
+ ath10k_warn(ar, "mac %s antenna chainmask may be invalid: 0x%x. Suggested values: 15, 7, 3, 1 or 0.\n",
+ dbg, cm);
+}
+
+static int __ath10k_set_antenna(struct ath10k *ar, u32 tx_ant, u32 rx_ant)
+{
+ int ret;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ ath10k_check_chain_mask(ar, tx_ant, "tx");
+ ath10k_check_chain_mask(ar, rx_ant, "rx");
+
+ ar->cfg_tx_chainmask = tx_ant;
+ ar->cfg_rx_chainmask = rx_ant;
+
+ if ((ar->state != ATH10K_STATE_ON) &&
+ (ar->state != ATH10K_STATE_RESTARTED))
+ return 0;
+
+ ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->tx_chain_mask,
+ tx_ant);
+ if (ret) {
+ ath10k_warn(ar, "failed to set tx-chainmask: %d, req 0x%x\n",
+ ret, tx_ant);
+ return ret;
+ }
+
+ ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->rx_chain_mask,
+ rx_ant);
+ if (ret) {
+ ath10k_warn(ar, "failed to set rx-chainmask: %d, req 0x%x\n",
+ ret, rx_ant);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int ath10k_set_antenna(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant)
+{
+ struct ath10k *ar = hw->priv;
+ int ret;
+
+ mutex_lock(&ar->conf_mutex);
+ ret = __ath10k_set_antenna(ar, tx_ant, rx_ant);
+ mutex_unlock(&ar->conf_mutex);
+ return ret;
+}
+
+static int ath10k_start(struct ieee80211_hw *hw)
+{
+ struct ath10k *ar = hw->priv;
+ int ret = 0;
+
+ /*
+ * This makes sense only when restarting hw. It is harmless to call
+ * uncoditionally. This is necessary to make sure no HTT/WMI tx
+ * commands will be submitted while restarting.
+ */
+ ath10k_drain_tx(ar);
+
+ mutex_lock(&ar->conf_mutex);
+
+ switch (ar->state) {
+ case ATH10K_STATE_OFF:
+ ar->state = ATH10K_STATE_ON;
+ break;
+ case ATH10K_STATE_RESTARTING:
+ ath10k_halt(ar);
+ ar->state = ATH10K_STATE_RESTARTED;
+ break;
+ case ATH10K_STATE_ON:
+ case ATH10K_STATE_RESTARTED:
+ case ATH10K_STATE_WEDGED:
+ WARN_ON(1);
+ ret = -EINVAL;
+ goto err;
+ case ATH10K_STATE_UTF:
+ ret = -EBUSY;
+ goto err;
+ }
+
+ ret = ath10k_hif_power_up(ar);
+ if (ret) {
+ ath10k_err(ar, "Could not init hif: %d\n", ret);
+ goto err_off;
+ }
+
+ ret = ath10k_core_start(ar, ATH10K_FIRMWARE_MODE_NORMAL);
+ if (ret) {
+ ath10k_err(ar, "Could not init core: %d\n", ret);
+ goto err_power_down;
+ }
+
+ ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->pmf_qos, 1);
+ if (ret) {
+ ath10k_warn(ar, "failed to enable PMF QOS: %d\n", ret);
+ goto err_core_stop;
+ }
+
+ ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->dynamic_bw, 1);
+ if (ret) {
+ ath10k_warn(ar, "failed to enable dynamic BW: %d\n", ret);
+ goto err_core_stop;
+ }
+
+ if (ar->cfg_tx_chainmask)
+ __ath10k_set_antenna(ar, ar->cfg_tx_chainmask,
+ ar->cfg_rx_chainmask);
+
+ /*
+ * By default FW set ARP frames ac to voice (6). In that case ARP
+ * exchange is not working properly for UAPSD enabled AP. ARP requests
+ * which arrives with access category 0 are processed by network stack
+ * and send back with access category 0, but FW changes access category
+ * to 6. Set ARP frames access category to best effort (0) solves
+ * this problem.
+ */
+
+ ret = ath10k_wmi_pdev_set_param(ar,
+ ar->wmi.pdev_param->arp_ac_override, 0);
+ if (ret) {
+ ath10k_warn(ar, "failed to set arp ac override parameter: %d\n",
+ ret);
+ goto err_core_stop;
+ }
+
+ ar->num_started_vdevs = 0;
+ ath10k_regd_update(ar);
+
+ ath10k_spectral_start(ar);
+
+ mutex_unlock(&ar->conf_mutex);
+ return 0;
+
+err_core_stop:
+ ath10k_core_stop(ar);
+
+err_power_down:
+ ath10k_hif_power_down(ar);
+
+err_off:
+ ar->state = ATH10K_STATE_OFF;
+
+err:
+ mutex_unlock(&ar->conf_mutex);
+ return ret;
+}
+
+static void ath10k_stop(struct ieee80211_hw *hw)
+{
+ struct ath10k *ar = hw->priv;
+
+ ath10k_drain_tx(ar);
+
+ mutex_lock(&ar->conf_mutex);
+ if (ar->state != ATH10K_STATE_OFF) {
+ ath10k_halt(ar);
+ ar->state = ATH10K_STATE_OFF;
+ }
+ mutex_unlock(&ar->conf_mutex);
+
+ cancel_delayed_work_sync(&ar->scan.timeout);
+ cancel_work_sync(&ar->restart_work);
+}
+
+static int ath10k_config_ps(struct ath10k *ar)
+{
+ struct ath10k_vif *arvif;
+ int ret = 0;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ list_for_each_entry(arvif, &ar->arvifs, list) {
+ ret = ath10k_mac_vif_setup_ps(arvif);
+ if (ret) {
+ ath10k_warn(ar, "failed to setup powersave: %d\n", ret);
+ break;
+ }
+ }
+
+ return ret;
+}
+
+static const char *chandef_get_width(enum nl80211_chan_width width)
+{
+ switch (width) {
+ case NL80211_CHAN_WIDTH_20_NOHT:
+ return "20 (noht)";
+ case NL80211_CHAN_WIDTH_20:
+ return "20";
+ case NL80211_CHAN_WIDTH_40:
+ return "40";
+ case NL80211_CHAN_WIDTH_80:
+ return "80";
+ case NL80211_CHAN_WIDTH_80P80:
+ return "80+80";
+ case NL80211_CHAN_WIDTH_160:
+ return "160";
+ case NL80211_CHAN_WIDTH_5:
+ return "5";
+ case NL80211_CHAN_WIDTH_10:
+ return "10";
+ }
+ return "?";
+}
+
+static void ath10k_config_chan(struct ath10k *ar)
+{
+ struct ath10k_vif *arvif;
+ int ret;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ ath10k_dbg(ar, ATH10K_DBG_MAC,
+ "mac config channel to %dMHz (cf1 %dMHz cf2 %dMHz width %s)\n",
+ ar->chandef.chan->center_freq,
+ ar->chandef.center_freq1,
+ ar->chandef.center_freq2,
+ chandef_get_width(ar->chandef.width));
+
+ /* First stop monitor interface. Some FW versions crash if there's a
+ * lone monitor interface. */
+ if (ar->monitor_started)
+ ath10k_monitor_stop(ar);
+
+ list_for_each_entry(arvif, &ar->arvifs, list) {
+ if (!arvif->is_started)
+ continue;
+
+ if (!arvif->is_up)
+ continue;
+
+ if (arvif->vdev_type == WMI_VDEV_TYPE_MONITOR)
+ continue;
+
+ ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id);
+ if (ret) {
+ ath10k_warn(ar, "failed to down vdev %d: %d\n",
+ arvif->vdev_id, ret);
+ continue;
+ }
+ }
+
+ /* all vdevs are downed now - attempt to restart and re-up them */
+
+ list_for_each_entry(arvif, &ar->arvifs, list) {
+ if (!arvif->is_started)
+ continue;
+
+ if (arvif->vdev_type == WMI_VDEV_TYPE_MONITOR)
+ continue;
+
+ ret = ath10k_vdev_restart(arvif);
+ if (ret) {
+ ath10k_warn(ar, "failed to restart vdev %d: %d\n",
+ arvif->vdev_id, ret);
+ continue;
+ }
+
+ if (!arvif->is_up)
+ continue;
+
+ ret = ath10k_wmi_vdev_up(arvif->ar, arvif->vdev_id, arvif->aid,
+ arvif->bssid);
+ if (ret) {
+ ath10k_warn(ar, "failed to bring vdev up %d: %d\n",
+ arvif->vdev_id, ret);
+ continue;
+ }
+ }
+
+ ath10k_monitor_recalc(ar);
+}
+
+static int ath10k_mac_txpower_setup(struct ath10k *ar, int txpower)
+{
+ int ret;
+ u32 param;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac txpower %d\n", txpower);
+
+ param = ar->wmi.pdev_param->txpower_limit2g;
+ ret = ath10k_wmi_pdev_set_param(ar, param, txpower * 2);
+ if (ret) {
+ ath10k_warn(ar, "failed to set 2g txpower %d: %d\n",
+ txpower, ret);
+ return ret;
+ }
+
+ param = ar->wmi.pdev_param->txpower_limit5g;
+ ret = ath10k_wmi_pdev_set_param(ar, param, txpower * 2);
+ if (ret) {
+ ath10k_warn(ar, "failed to set 5g txpower %d: %d\n",
+ txpower, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int ath10k_mac_txpower_recalc(struct ath10k *ar)
+{
+ struct ath10k_vif *arvif;
+ int ret, txpower = -1;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ list_for_each_entry(arvif, &ar->arvifs, list) {
+ WARN_ON(arvif->txpower < 0);
+
+ if (txpower == -1)
+ txpower = arvif->txpower;
+ else
+ txpower = min(txpower, arvif->txpower);
+ }
+
+ if (WARN_ON(txpower == -1))
+ return -EINVAL;
+
+ ret = ath10k_mac_txpower_setup(ar, txpower);
+ if (ret) {
+ ath10k_warn(ar, "failed to setup tx power %d: %d\n",
+ txpower, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int ath10k_config(struct ieee80211_hw *hw, u32 changed)
+{
+ struct ath10k *ar = hw->priv;
+ struct ieee80211_conf *conf = &hw->conf;
+ int ret = 0;
+
+ mutex_lock(&ar->conf_mutex);
+
+ if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
+ ath10k_dbg(ar, ATH10K_DBG_MAC,
+ "mac config channel %dMHz flags 0x%x radar %d\n",
+ conf->chandef.chan->center_freq,
+ conf->chandef.chan->flags,
+ conf->radar_enabled);
+
+ spin_lock_bh(&ar->data_lock);
+ ar->rx_channel = conf->chandef.chan;
+ spin_unlock_bh(&ar->data_lock);
+
+ ar->radar_enabled = conf->radar_enabled;
+ ath10k_recalc_radar_detection(ar);
+
+ if (!cfg80211_chandef_identical(&ar->chandef, &conf->chandef)) {
+ ar->chandef = conf->chandef;
+ ath10k_config_chan(ar);
+ }
+ }
+
+ if (changed & IEEE80211_CONF_CHANGE_PS)
+ ath10k_config_ps(ar);
+
+ if (changed & IEEE80211_CONF_CHANGE_MONITOR) {
+ ar->monitor = conf->flags & IEEE80211_CONF_MONITOR;
+ ret = ath10k_monitor_recalc(ar);
+ if (ret)
+ ath10k_warn(ar, "failed to recalc monitor: %d\n", ret);
+ }
+
+ mutex_unlock(&ar->conf_mutex);
+ return ret;
+}
+
+static u32 get_nss_from_chainmask(u16 chain_mask)
+{
+ if ((chain_mask & 0x15) == 0x15)
+ return 4;
+ else if ((chain_mask & 0x7) == 0x7)
+ return 3;
+ else if ((chain_mask & 0x3) == 0x3)
+ return 2;
+ return 1;
+}
+
+/*
+ * TODO:
+ * Figure out how to handle WMI_VDEV_SUBTYPE_P2P_DEVICE,
+ * because we will send mgmt frames without CCK. This requirement
+ * for P2P_FIND/GO_NEG should be handled by checking CCK flag
+ * in the TX packet.
+ */
+static int ath10k_add_interface(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif)
+{
+ struct ath10k *ar = hw->priv;
+ struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+ enum wmi_sta_powersave_param param;
+ int ret = 0;
+ u32 value;
+ int bit;
+ u32 vdev_param;
+
+ vif->driver_flags |= IEEE80211_VIF_SUPPORTS_UAPSD;
+
+ mutex_lock(&ar->conf_mutex);
+
+ memset(arvif, 0, sizeof(*arvif));
+
+ arvif->ar = ar;
+ arvif->vif = vif;
+
+ INIT_LIST_HEAD(&arvif->list);
+
+ if (ar->free_vdev_map == 0) {
+ ath10k_warn(ar, "Free vdev map is empty, no more interfaces allowed.\n");
+ ret = -EBUSY;
+ goto err;
+ }
+ bit = __ffs64(ar->free_vdev_map);
+
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac create vdev %i map %llx\n",
+ bit, ar->free_vdev_map);
+
+ arvif->vdev_id = bit;
+ arvif->vdev_subtype = WMI_VDEV_SUBTYPE_NONE;
+
+ switch (vif->type) {
+ case NL80211_IFTYPE_P2P_DEVICE:
+ arvif->vdev_type = WMI_VDEV_TYPE_STA;
+ arvif->vdev_subtype = WMI_VDEV_SUBTYPE_P2P_DEVICE;
+ break;
+ case NL80211_IFTYPE_UNSPECIFIED:
+ case NL80211_IFTYPE_STATION:
+ arvif->vdev_type = WMI_VDEV_TYPE_STA;
+ if (vif->p2p)
+ arvif->vdev_subtype = WMI_VDEV_SUBTYPE_P2P_CLIENT;
+ break;
+ case NL80211_IFTYPE_ADHOC:
+ arvif->vdev_type = WMI_VDEV_TYPE_IBSS;
+ break;
+ case NL80211_IFTYPE_AP:
+ arvif->vdev_type = WMI_VDEV_TYPE_AP;
+
+ if (vif->p2p)
+ arvif->vdev_subtype = WMI_VDEV_SUBTYPE_P2P_GO;
+ break;
+ case NL80211_IFTYPE_MONITOR:
+ arvif->vdev_type = WMI_VDEV_TYPE_MONITOR;
+ break;
+ default:
+ WARN_ON(1);
+ break;
+ }
+
+ /* Some firmware revisions don't wait for beacon tx completion before
+ * sending another SWBA event. This could lead to hardware using old
+ * (freed) beacon data in some cases, e.g. tx credit starvation
+ * combined with missed TBTT. This is very very rare.
+ *
+ * On non-IOMMU-enabled hosts this could be a possible security issue
+ * because hw could beacon some random data on the air. On
+ * IOMMU-enabled hosts DMAR faults would occur in most cases and target
+ * device would crash.
+ *
+ * Since there are no beacon tx completions (implicit nor explicit)
+ * propagated to host the only workaround for this is to allocate a
+ * DMA-coherent buffer for a lifetime of a vif and use it for all
+ * beacon tx commands. Worst case for this approach is some beacons may
+ * become corrupted, e.g. have garbled IEs or out-of-date TIM bitmap.
+ */
+ if (vif->type == NL80211_IFTYPE_ADHOC ||
+ vif->type == NL80211_IFTYPE_AP) {
+ arvif->beacon_buf = dma_zalloc_coherent(ar->dev,
+ IEEE80211_MAX_FRAME_LEN,
+ &arvif->beacon_paddr,
+ GFP_ATOMIC);
+ if (!arvif->beacon_buf) {
+ ret = -ENOMEM;
+ ath10k_warn(ar, "failed to allocate beacon buffer: %d\n",
+ ret);
+ goto err;
+ }
+ }
+
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev create %d (add interface) type %d subtype %d bcnmode %s\n",
+ arvif->vdev_id, arvif->vdev_type, arvif->vdev_subtype,
+ arvif->beacon_buf ? "single-buf" : "per-skb");
+
+ ret = ath10k_wmi_vdev_create(ar, arvif->vdev_id, arvif->vdev_type,
+ arvif->vdev_subtype, vif->addr);
+ if (ret) {
+ ath10k_warn(ar, "failed to create WMI vdev %i: %d\n",
+ arvif->vdev_id, ret);
+ goto err;
+ }
+
+ ar->free_vdev_map &= ~(1LL << arvif->vdev_id);
+ list_add(&arvif->list, &ar->arvifs);
+
+ /* It makes no sense to have firmware do keepalives. mac80211 already
+ * takes care of this with idle connection polling.
+ */
+ ret = ath10k_mac_vif_disable_keepalive(arvif);
+ if (ret) {
+ ath10k_warn(ar, "failed to disable keepalive on vdev %i: %d\n",
+ arvif->vdev_id, ret);
+ goto err_vdev_delete;
+ }
+
+ arvif->def_wep_key_idx = -1;
+
+ vdev_param = ar->wmi.vdev_param->tx_encap_type;
+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
+ ATH10K_HW_TXRX_NATIVE_WIFI);
+ /* 10.X firmware does not support this VDEV parameter. Do not warn */
+ if (ret && ret != -EOPNOTSUPP) {
+ ath10k_warn(ar, "failed to set vdev %i TX encapsulation: %d\n",
+ arvif->vdev_id, ret);
+ goto err_vdev_delete;
+ }
+
+ if (ar->cfg_tx_chainmask) {
+ u16 nss = get_nss_from_chainmask(ar->cfg_tx_chainmask);
+
+ vdev_param = ar->wmi.vdev_param->nss;
+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
+ nss);
+ if (ret) {
+ ath10k_warn(ar, "failed to set vdev %i chainmask 0x%x, nss %i: %d\n",
+ arvif->vdev_id, ar->cfg_tx_chainmask, nss,
+ ret);
+ goto err_vdev_delete;
+ }
+ }
+
+ if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
+ ret = ath10k_peer_create(ar, arvif->vdev_id, vif->addr);
+ if (ret) {
+ ath10k_warn(ar, "failed to create vdev %i peer for AP: %d\n",
+ arvif->vdev_id, ret);
+ goto err_vdev_delete;
+ }
+
+ ret = ath10k_mac_set_kickout(arvif);
+ if (ret) {
+ ath10k_warn(ar, "failed to set vdev %i kickout parameters: %d\n",
+ arvif->vdev_id, ret);
+ goto err_peer_delete;
+ }
+ }
+
+ if (arvif->vdev_type == WMI_VDEV_TYPE_STA) {
+ param = WMI_STA_PS_PARAM_RX_WAKE_POLICY;
+ value = WMI_STA_PS_RX_WAKE_POLICY_WAKE;
+ ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
+ param, value);
+ if (ret) {
+ ath10k_warn(ar, "failed to set vdev %i RX wake policy: %d\n",
+ arvif->vdev_id, ret);
+ goto err_peer_delete;
+ }
+
+ ret = ath10k_mac_vif_recalc_ps_wake_threshold(arvif);
+ if (ret) {
+ ath10k_warn(ar, "failed to recalc ps wake threshold on vdev %i: %d\n",
+ arvif->vdev_id, ret);
+ goto err_peer_delete;
+ }
+
+ ret = ath10k_mac_vif_recalc_ps_poll_count(arvif);
+ if (ret) {
+ ath10k_warn(ar, "failed to recalc ps poll count on vdev %i: %d\n",
+ arvif->vdev_id, ret);
+ goto err_peer_delete;
+ }
+ }
+
+ ret = ath10k_mac_set_rts(arvif, ar->hw->wiphy->rts_threshold);
+ if (ret) {
+ ath10k_warn(ar, "failed to set rts threshold for vdev %d: %d\n",
+ arvif->vdev_id, ret);
+ goto err_peer_delete;
+ }
+
+ ret = ath10k_mac_set_frag(arvif, ar->hw->wiphy->frag_threshold);
+ if (ret) {
+ ath10k_warn(ar, "failed to set frag threshold for vdev %d: %d\n",
+ arvif->vdev_id, ret);
+ goto err_peer_delete;
+ }
+
+ arvif->txpower = vif->bss_conf.txpower;
+ ret = ath10k_mac_txpower_recalc(ar);
+ if (ret) {
+ ath10k_warn(ar, "failed to recalc tx power: %d\n", ret);
+ goto err_peer_delete;
+ }
+
+ mutex_unlock(&ar->conf_mutex);
+ return 0;
+
+err_peer_delete:
+ if (arvif->vdev_type == WMI_VDEV_TYPE_AP)
+ ath10k_wmi_peer_delete(ar, arvif->vdev_id, vif->addr);
+
+err_vdev_delete:
+ ath10k_wmi_vdev_delete(ar, arvif->vdev_id);
+ ar->free_vdev_map |= 1LL << arvif->vdev_id;
+ list_del(&arvif->list);
+
+err:
+ if (arvif->beacon_buf) {
+ dma_free_coherent(ar->dev, IEEE80211_MAX_FRAME_LEN,
+ arvif->beacon_buf, arvif->beacon_paddr);
+ arvif->beacon_buf = NULL;
+ }
+
+ mutex_unlock(&ar->conf_mutex);
+
+ return ret;
+}
+
+static void ath10k_remove_interface(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif)
+{
+ struct ath10k *ar = hw->priv;
+ struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+ int ret;
+
+ mutex_lock(&ar->conf_mutex);
+
+ spin_lock_bh(&ar->data_lock);
+ ath10k_mac_vif_beacon_cleanup(arvif);
+ spin_unlock_bh(&ar->data_lock);
+
+ ret = ath10k_spectral_vif_stop(arvif);
+ if (ret)
+ ath10k_warn(ar, "failed to stop spectral for vdev %i: %d\n",
+ arvif->vdev_id, ret);
+
+ ar->free_vdev_map |= 1LL << arvif->vdev_id;
+ list_del(&arvif->list);
+
+ if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
+ ret = ath10k_wmi_peer_delete(arvif->ar, arvif->vdev_id,
+ vif->addr);
+ if (ret)
+ ath10k_warn(ar, "failed to submit AP self-peer removal on vdev %i: %d\n",
+ arvif->vdev_id, ret);
+
+ kfree(arvif->u.ap.noa_data);
+ }
+
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %i delete (remove interface)\n",
+ arvif->vdev_id);
+
+ ret = ath10k_wmi_vdev_delete(ar, arvif->vdev_id);
+ if (ret)
+ ath10k_warn(ar, "failed to delete WMI vdev %i: %d\n",
+ arvif->vdev_id, ret);
+
+ /* Some firmware revisions don't notify host about self-peer removal
+ * until after associated vdev is deleted.
+ */
+ if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
+ ret = ath10k_wait_for_peer_deleted(ar, arvif->vdev_id,
+ vif->addr);
+ if (ret)
+ ath10k_warn(ar, "failed to remove AP self-peer on vdev %i: %d\n",
+ arvif->vdev_id, ret);
+
+ spin_lock_bh(&ar->data_lock);
+ ar->num_peers--;
+ spin_unlock_bh(&ar->data_lock);
+ }
+
+ ath10k_peer_cleanup(ar, arvif->vdev_id);
+
+ mutex_unlock(&ar->conf_mutex);
+}
+
+/*
+ * FIXME: Has to be verified.
+ */
+#define SUPPORTED_FILTERS \
+ (FIF_PROMISC_IN_BSS | \
+ FIF_ALLMULTI | \
+ FIF_CONTROL | \
+ FIF_PSPOLL | \
+ FIF_OTHER_BSS | \
+ FIF_BCN_PRBRESP_PROMISC | \
+ FIF_PROBE_REQ | \
+ FIF_FCSFAIL)
+
+static void ath10k_configure_filter(struct ieee80211_hw *hw,
+ unsigned int changed_flags,
+ unsigned int *total_flags,
+ u64 multicast)
+{
+ struct ath10k *ar = hw->priv;
+ int ret;
+
+ mutex_lock(&ar->conf_mutex);
+
+ changed_flags &= SUPPORTED_FILTERS;
+ *total_flags &= SUPPORTED_FILTERS;
+ ar->filter_flags = *total_flags;
+
+ ret = ath10k_monitor_recalc(ar);
+ if (ret)
+ ath10k_warn(ar, "failed to recalc montior: %d\n", ret);
+
+ mutex_unlock(&ar->conf_mutex);
+}
+
+static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_bss_conf *info,
+ u32 changed)
+{
+ struct ath10k *ar = hw->priv;
+ struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+ int ret = 0;
+ u32 vdev_param, pdev_param, slottime, preamble;
+
+ mutex_lock(&ar->conf_mutex);
+
+ if (changed & BSS_CHANGED_IBSS)
+ ath10k_control_ibss(arvif, info, vif->addr);
+
+ if (changed & BSS_CHANGED_BEACON_INT) {
+ arvif->beacon_interval = info->beacon_int;
+ vdev_param = ar->wmi.vdev_param->beacon_interval;
+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
+ arvif->beacon_interval);
+ ath10k_dbg(ar, ATH10K_DBG_MAC,
+ "mac vdev %d beacon_interval %d\n",
+ arvif->vdev_id, arvif->beacon_interval);
+
+ if (ret)
+ ath10k_warn(ar, "failed to set beacon interval for vdev %d: %i\n",
+ arvif->vdev_id, ret);
+ }
+
+ if (changed & BSS_CHANGED_BEACON) {
+ ath10k_dbg(ar, ATH10K_DBG_MAC,
+ "vdev %d set beacon tx mode to staggered\n",
+ arvif->vdev_id);
+
+ pdev_param = ar->wmi.pdev_param->beacon_tx_mode;
+ ret = ath10k_wmi_pdev_set_param(ar, pdev_param,
+ WMI_BEACON_STAGGERED_MODE);
+ if (ret)
+ ath10k_warn(ar, "failed to set beacon mode for vdev %d: %i\n",
+ arvif->vdev_id, ret);
+
+ ret = ath10k_mac_setup_bcn_tmpl(arvif);
+ if (ret)
+ ath10k_warn(ar, "failed to update beacon template: %d\n",
+ ret);
+ }
+
+ if (changed & BSS_CHANGED_AP_PROBE_RESP) {
+ ret = ath10k_mac_setup_prb_tmpl(arvif);
+ if (ret)
+ ath10k_warn(ar, "failed to setup probe resp template on vdev %i: %d\n",
+ arvif->vdev_id, ret);
+ }
+
+ if (changed & (BSS_CHANGED_BEACON_INFO | BSS_CHANGED_BEACON)) {
+ arvif->dtim_period = info->dtim_period;
+
+ ath10k_dbg(ar, ATH10K_DBG_MAC,
+ "mac vdev %d dtim_period %d\n",
+ arvif->vdev_id, arvif->dtim_period);
+
+ vdev_param = ar->wmi.vdev_param->dtim_period;
+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
+ arvif->dtim_period);
+ if (ret)
+ ath10k_warn(ar, "failed to set dtim period for vdev %d: %i\n",
+ arvif->vdev_id, ret);
+ }
+
+ if (changed & BSS_CHANGED_SSID &&
+ vif->type == NL80211_IFTYPE_AP) {
+ arvif->u.ap.ssid_len = info->ssid_len;
+ if (info->ssid_len)
+ memcpy(arvif->u.ap.ssid, info->ssid, info->ssid_len);
+ arvif->u.ap.hidden_ssid = info->hidden_ssid;
+ }
+
+ if (changed & BSS_CHANGED_BSSID && !is_zero_ether_addr(info->bssid))
+ ether_addr_copy(arvif->bssid, info->bssid);
+
+ if (changed & BSS_CHANGED_BEACON_ENABLED)
+ ath10k_control_beaconing(arvif, info);
+
+ if (changed & BSS_CHANGED_ERP_CTS_PROT) {
+ arvif->use_cts_prot = info->use_cts_prot;
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d cts_prot %d\n",
+ arvif->vdev_id, info->use_cts_prot);
+
+ ret = ath10k_recalc_rtscts_prot(arvif);
+ if (ret)
+ ath10k_warn(ar, "failed to recalculate rts/cts prot for vdev %d: %d\n",
+ arvif->vdev_id, ret);
+ }
+
+ if (changed & BSS_CHANGED_ERP_SLOT) {
+ if (info->use_short_slot)
+ slottime = WMI_VDEV_SLOT_TIME_SHORT; /* 9us */
+
+ else
+ slottime = WMI_VDEV_SLOT_TIME_LONG; /* 20us */
+
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d slot_time %d\n",
+ arvif->vdev_id, slottime);
+
+ vdev_param = ar->wmi.vdev_param->slot_time;
+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
+ slottime);
+ if (ret)
+ ath10k_warn(ar, "failed to set erp slot for vdev %d: %i\n",
+ arvif->vdev_id, ret);
+ }
+
+ if (changed & BSS_CHANGED_ERP_PREAMBLE) {
+ if (info->use_short_preamble)
+ preamble = WMI_VDEV_PREAMBLE_SHORT;
+ else
+ preamble = WMI_VDEV_PREAMBLE_LONG;
+
+ ath10k_dbg(ar, ATH10K_DBG_MAC,
+ "mac vdev %d preamble %dn",
+ arvif->vdev_id, preamble);
+
+ vdev_param = ar->wmi.vdev_param->preamble;
+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
+ preamble);
+ if (ret)
+ ath10k_warn(ar, "failed to set preamble for vdev %d: %i\n",
+ arvif->vdev_id, ret);
+ }
+
+ if (changed & BSS_CHANGED_ASSOC) {
+ if (info->assoc) {
+ /* Workaround: Make sure monitor vdev is not running
+ * when associating to prevent some firmware revisions
+ * (e.g. 10.1 and 10.2) from crashing.
+ */
+ if (ar->monitor_started)
+ ath10k_monitor_stop(ar);
+ ath10k_bss_assoc(hw, vif, info);
+ ath10k_monitor_recalc(ar);
+ } else {
+ ath10k_bss_disassoc(hw, vif);
+ }
+ }
+
+ if (changed & BSS_CHANGED_TXPOWER) {
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev_id %i txpower %d\n",
+ arvif->vdev_id, info->txpower);
+
+ arvif->txpower = info->txpower;
+ ret = ath10k_mac_txpower_recalc(ar);
+ if (ret)
+ ath10k_warn(ar, "failed to recalc tx power: %d\n", ret);
+ }
+
+ if (changed & BSS_CHANGED_PS) {
+ arvif->ps = vif->bss_conf.ps;
+
+ ret = ath10k_config_ps(ar);
+ if (ret)
+ ath10k_warn(ar, "failed to setup ps on vdev %i: %d\n",
+ arvif->vdev_id, ret);
+ }
+
+ mutex_unlock(&ar->conf_mutex);
+}
+
+static int ath10k_hw_scan(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_scan_request *hw_req)
+{
+ struct ath10k *ar = hw->priv;
+ struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+ struct cfg80211_scan_request *req = &hw_req->req;
+ struct wmi_start_scan_arg arg;
+ int ret = 0;
+ int i;
+
+ mutex_lock(&ar->conf_mutex);
+
+ spin_lock_bh(&ar->data_lock);
+ switch (ar->scan.state) {
+ case ATH10K_SCAN_IDLE:
+ reinit_completion(&ar->scan.started);
+ reinit_completion(&ar->scan.completed);
+ ar->scan.state = ATH10K_SCAN_STARTING;
+ ar->scan.is_roc = false;
+ ar->scan.vdev_id = arvif->vdev_id;
+ ret = 0;
+ break;
+ case ATH10K_SCAN_STARTING:
+ case ATH10K_SCAN_RUNNING:
+ case ATH10K_SCAN_ABORTING:
+ ret = -EBUSY;
+ break;
+ }
+ spin_unlock_bh(&ar->data_lock);
+
+ if (ret)
+ goto exit;
+
+ memset(&arg, 0, sizeof(arg));
+ ath10k_wmi_start_scan_init(ar, &arg);
+ arg.vdev_id = arvif->vdev_id;
+ arg.scan_id = ATH10K_SCAN_ID;
+
+ if (!req->no_cck)
+ arg.scan_ctrl_flags |= WMI_SCAN_ADD_CCK_RATES;
+
+ if (req->ie_len) {
+ arg.ie_len = req->ie_len;
+ memcpy(arg.ie, req->ie, arg.ie_len);
+ }
+
+ if (req->n_ssids) {
+ arg.n_ssids = req->n_ssids;
+ for (i = 0; i < arg.n_ssids; i++) {
+ arg.ssids[i].len = req->ssids[i].ssid_len;
+ arg.ssids[i].ssid = req->ssids[i].ssid;
+ }
+ } else {
+ arg.scan_ctrl_flags |= WMI_SCAN_FLAG_PASSIVE;
+ }
+
+ if (req->n_channels) {
+ arg.n_channels = req->n_channels;
+ for (i = 0; i < arg.n_channels; i++)
+ arg.channels[i] = req->channels[i]->center_freq;
+ }
+
+ ret = ath10k_start_scan(ar, &arg);
+ if (ret) {
+ ath10k_warn(ar, "failed to start hw scan: %d\n", ret);
+ spin_lock_bh(&ar->data_lock);
+ ar->scan.state = ATH10K_SCAN_IDLE;
+ spin_unlock_bh(&ar->data_lock);
+ }
+
+exit:
+ mutex_unlock(&ar->conf_mutex);
+ return ret;
+}
+
+static void ath10k_cancel_hw_scan(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif)
+{
+ struct ath10k *ar = hw->priv;
+
+ mutex_lock(&ar->conf_mutex);
+ ath10k_scan_abort(ar);
+ mutex_unlock(&ar->conf_mutex);
+
+ cancel_delayed_work_sync(&ar->scan.timeout);
+}
+
+static void ath10k_set_key_h_def_keyidx(struct ath10k *ar,
+ struct ath10k_vif *arvif,
+ enum set_key_cmd cmd,
+ struct ieee80211_key_conf *key)
+{
+ u32 vdev_param = arvif->ar->wmi.vdev_param->def_keyid;
+ int ret;
+
+ /* 10.1 firmware branch requires default key index to be set to group
+ * key index after installing it. Otherwise FW/HW Txes corrupted
+ * frames with multi-vif APs. This is not required for main firmware
+ * branch (e.g. 636).
+ *
+ * FIXME: This has been tested only in AP. It remains unknown if this
+ * is required for multi-vif STA interfaces on 10.1 */
+
+ if (arvif->vdev_type != WMI_VDEV_TYPE_AP)
+ return;
+
+ if (key->cipher == WLAN_CIPHER_SUITE_WEP40)
+ return;
+
+ if (key->cipher == WLAN_CIPHER_SUITE_WEP104)
+ return;
+
+ if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE)
+ return;
+
+ if (cmd != SET_KEY)
+ return;
+
+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
+ key->keyidx);
+ if (ret)
+ ath10k_warn(ar, "failed to set vdev %i group key as default key: %d\n",
+ arvif->vdev_id, ret);
+}
+
+static int ath10k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+ struct ieee80211_vif *vif, struct ieee80211_sta *sta,
+ struct ieee80211_key_conf *key)
+{
+ struct ath10k *ar = hw->priv;
+ struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+ struct ath10k_peer *peer;
+ const u8 *peer_addr;
+ bool is_wep = key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
+ key->cipher == WLAN_CIPHER_SUITE_WEP104;
+ bool def_idx = false;
+ int ret = 0;
+
+ if (key->keyidx > WMI_MAX_KEY_INDEX)
+ return -ENOSPC;
+
+ mutex_lock(&ar->conf_mutex);
+
+ if (sta)
+ peer_addr = sta->addr;
+ else if (arvif->vdev_type == WMI_VDEV_TYPE_STA)
+ peer_addr = vif->bss_conf.bssid;
+ else
+ peer_addr = vif->addr;
+
+ key->hw_key_idx = key->keyidx;
+
+ /* the peer should not disappear in mid-way (unless FW goes awry) since
+ * we already hold conf_mutex. we just make sure its there now. */
+ spin_lock_bh(&ar->data_lock);
+ peer = ath10k_peer_find(ar, arvif->vdev_id, peer_addr);
+ spin_unlock_bh(&ar->data_lock);
+
+ if (!peer) {
+ if (cmd == SET_KEY) {
+ ath10k_warn(ar, "failed to install key for non-existent peer %pM\n",
+ peer_addr);
+ ret = -EOPNOTSUPP;
+ goto exit;
+ } else {
+ /* if the peer doesn't exist there is no key to disable
+ * anymore */
+ goto exit;
+ }
+ }
+
+ if (is_wep) {
+ if (cmd == SET_KEY)
+ arvif->wep_keys[key->keyidx] = key;
+ else
+ arvif->wep_keys[key->keyidx] = NULL;
+
+ if (cmd == DISABLE_KEY)
+ ath10k_clear_vdev_key(arvif, key);
+ }
+
+ /* set TX_USAGE flag for all the keys incase of dot1x-WEP. For
+ * static WEP, do not set this flag for the keys whose key id
+ * is greater than default key id.
+ */
+ if (arvif->def_wep_key_idx == -1)
+ def_idx = true;
+
+ ret = ath10k_install_key(arvif, key, cmd, peer_addr, def_idx);
+ if (ret) {
+ ath10k_warn(ar, "failed to install key for vdev %i peer %pM: %d\n",
+ arvif->vdev_id, peer_addr, ret);
+ goto exit;
+ }
+
+ ath10k_set_key_h_def_keyidx(ar, arvif, cmd, key);
+
+ spin_lock_bh(&ar->data_lock);
+ peer = ath10k_peer_find(ar, arvif->vdev_id, peer_addr);
+ if (peer && cmd == SET_KEY)
+ peer->keys[key->keyidx] = key;
+ else if (peer && cmd == DISABLE_KEY)
+ peer->keys[key->keyidx] = NULL;
+ else if (peer == NULL)
+ /* impossible unless FW goes crazy */
+ ath10k_warn(ar, "Peer %pM disappeared!\n", peer_addr);
+ spin_unlock_bh(&ar->data_lock);
+
+exit:
+ mutex_unlock(&ar->conf_mutex);
+ return ret;
+}
+
+static void ath10k_set_default_unicast_key(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ int keyidx)
+{
+ struct ath10k *ar = hw->priv;
+ struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+ int ret;
+
+ mutex_lock(&arvif->ar->conf_mutex);
+
+ if (arvif->ar->state != ATH10K_STATE_ON)
+ goto unlock;
+
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d set keyidx %d\n",
+ arvif->vdev_id, keyidx);
+
+ ret = ath10k_wmi_vdev_set_param(arvif->ar,
+ arvif->vdev_id,
+ arvif->ar->wmi.vdev_param->def_keyid,
+ keyidx);
+
+ if (ret) {
+ ath10k_warn(ar, "failed to update wep key index for vdev %d: %d\n",
+ arvif->vdev_id,
+ ret);
+ goto unlock;
+ }
+
+ arvif->def_wep_key_idx = keyidx;
+unlock:
+ mutex_unlock(&arvif->ar->conf_mutex);
+}
+
+static void ath10k_sta_rc_update_wk(struct work_struct *wk)
+{
+ struct ath10k *ar;
+ struct ath10k_vif *arvif;
+ struct ath10k_sta *arsta;
+ struct ieee80211_sta *sta;
+ u32 changed, bw, nss, smps;
+ int err;
+
+ arsta = container_of(wk, struct ath10k_sta, update_wk);
+ sta = container_of((void *)arsta, struct ieee80211_sta, drv_priv);
+ arvif = arsta->arvif;
+ ar = arvif->ar;
+
+ spin_lock_bh(&ar->data_lock);
+
+ changed = arsta->changed;
+ arsta->changed = 0;
+
+ bw = arsta->bw;
+ nss = arsta->nss;
+ smps = arsta->smps;
+
+ spin_unlock_bh(&ar->data_lock);
+
+ mutex_lock(&ar->conf_mutex);
+
+ if (changed & IEEE80211_RC_BW_CHANGED) {
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac update sta %pM peer bw %d\n",
+ sta->addr, bw);
+
+ err = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr,
+ WMI_PEER_CHAN_WIDTH, bw);
+ if (err)
+ ath10k_warn(ar, "failed to update STA %pM peer bw %d: %d\n",
+ sta->addr, bw, err);
+ }
+
+ if (changed & IEEE80211_RC_NSS_CHANGED) {
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac update sta %pM nss %d\n",
+ sta->addr, nss);
+
+ err = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr,
+ WMI_PEER_NSS, nss);
+ if (err)
+ ath10k_warn(ar, "failed to update STA %pM nss %d: %d\n",
+ sta->addr, nss, err);
+ }
+
+ if (changed & IEEE80211_RC_SMPS_CHANGED) {
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac update sta %pM smps %d\n",
+ sta->addr, smps);
+
+ err = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr,
+ WMI_PEER_SMPS_STATE, smps);
+ if (err)
+ ath10k_warn(ar, "failed to update STA %pM smps %d: %d\n",
+ sta->addr, smps, err);
+ }
+
+ if (changed & IEEE80211_RC_SUPP_RATES_CHANGED ||
+ changed & IEEE80211_RC_NSS_CHANGED) {
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac update sta %pM supp rates/nss\n",
+ sta->addr);
+
+ err = ath10k_station_assoc(ar, arvif->vif, sta, true);
+ if (err)
+ ath10k_warn(ar, "failed to reassociate station: %pM\n",
+ sta->addr);
+ }
+
+ mutex_unlock(&ar->conf_mutex);
+}
+
+static int ath10k_mac_inc_num_stations(struct ath10k_vif *arvif)
+{
+ struct ath10k *ar = arvif->ar;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ if (arvif->vdev_type != WMI_VDEV_TYPE_AP &&
+ arvif->vdev_type != WMI_VDEV_TYPE_IBSS)
+ return 0;
+
+ if (ar->num_stations >= ar->max_num_stations)
+ return -ENOBUFS;
+
+ ar->num_stations++;
+
+ return 0;
+}
+
+static void ath10k_mac_dec_num_stations(struct ath10k_vif *arvif)
+{
+ struct ath10k *ar = arvif->ar;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ if (arvif->vdev_type != WMI_VDEV_TYPE_AP &&
+ arvif->vdev_type != WMI_VDEV_TYPE_IBSS)
+ return;
+
+ ar->num_stations--;
+}
+
+static int ath10k_sta_state(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta,
+ enum ieee80211_sta_state old_state,
+ enum ieee80211_sta_state new_state)
+{
+ struct ath10k *ar = hw->priv;
+ struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+ struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
+ int ret = 0;
+
+ if (old_state == IEEE80211_STA_NOTEXIST &&
+ new_state == IEEE80211_STA_NONE) {
+ memset(arsta, 0, sizeof(*arsta));
+ arsta->arvif = arvif;
+ INIT_WORK(&arsta->update_wk, ath10k_sta_rc_update_wk);
+ }
+
+ /* cancel must be done outside the mutex to avoid deadlock */
+ if ((old_state == IEEE80211_STA_NONE &&
+ new_state == IEEE80211_STA_NOTEXIST))
+ cancel_work_sync(&arsta->update_wk);
+
+ mutex_lock(&ar->conf_mutex);
+
+ if (old_state == IEEE80211_STA_NOTEXIST &&
+ new_state == IEEE80211_STA_NONE) {
+ /*
+ * New station addition.
+ */
+ ath10k_dbg(ar, ATH10K_DBG_MAC,
+ "mac vdev %d peer create %pM (new sta) sta %d / %d peer %d / %d\n",
+ arvif->vdev_id, sta->addr,
+ ar->num_stations + 1, ar->max_num_stations,
+ ar->num_peers + 1, ar->max_num_peers);
+
+ ret = ath10k_mac_inc_num_stations(arvif);
+ if (ret) {
+ ath10k_warn(ar, "refusing to associate station: too many connected already (%d)\n",
+ ar->max_num_stations);
+ goto exit;
+ }
+
+ ret = ath10k_peer_create(ar, arvif->vdev_id, sta->addr);
+ if (ret) {
+ ath10k_warn(ar, "failed to add peer %pM for vdev %d when adding a new sta: %i\n",
+ sta->addr, arvif->vdev_id, ret);
+ ath10k_mac_dec_num_stations(arvif);
+ goto exit;
+ }
+
+ if (vif->type == NL80211_IFTYPE_STATION) {
+ WARN_ON(arvif->is_started);
+
+ ret = ath10k_vdev_start(arvif);
+ if (ret) {
+ ath10k_warn(ar, "failed to start vdev %i: %d\n",
+ arvif->vdev_id, ret);
+ WARN_ON(ath10k_peer_delete(ar, arvif->vdev_id,
+ sta->addr));
+ ath10k_mac_dec_num_stations(arvif);
+ goto exit;
+ }
+
+ arvif->is_started = true;
+ }
+ } else if ((old_state == IEEE80211_STA_NONE &&
+ new_state == IEEE80211_STA_NOTEXIST)) {
+ /*
+ * Existing station deletion.
+ */
+ ath10k_dbg(ar, ATH10K_DBG_MAC,
+ "mac vdev %d peer delete %pM (sta gone)\n",
+ arvif->vdev_id, sta->addr);
+
+ if (vif->type == NL80211_IFTYPE_STATION) {
+ WARN_ON(!arvif->is_started);
+
+ ret = ath10k_vdev_stop(arvif);
+ if (ret)
+ ath10k_warn(ar, "failed to stop vdev %i: %d\n",
+ arvif->vdev_id, ret);
+
+ arvif->is_started = false;
+ }
+
+ ret = ath10k_peer_delete(ar, arvif->vdev_id, sta->addr);
+ if (ret)
+ ath10k_warn(ar, "failed to delete peer %pM for vdev %d: %i\n",
+ sta->addr, arvif->vdev_id, ret);
+
+ ath10k_mac_dec_num_stations(arvif);
+ } else if (old_state == IEEE80211_STA_AUTH &&
+ new_state == IEEE80211_STA_ASSOC &&
+ (vif->type == NL80211_IFTYPE_AP ||
+ vif->type == NL80211_IFTYPE_ADHOC)) {
+ /*
+ * New association.
+ */
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac sta %pM associated\n",
+ sta->addr);
+
+ ret = ath10k_station_assoc(ar, vif, sta, false);
+ if (ret)
+ ath10k_warn(ar, "failed to associate station %pM for vdev %i: %i\n",
+ sta->addr, arvif->vdev_id, ret);
+ } else if (old_state == IEEE80211_STA_ASSOC &&
+ new_state == IEEE80211_STA_AUTH &&
+ (vif->type == NL80211_IFTYPE_AP ||
+ vif->type == NL80211_IFTYPE_ADHOC)) {
+ /*
+ * Disassociation.
+ */
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac sta %pM disassociated\n",
+ sta->addr);
+
+ ret = ath10k_station_disassoc(ar, vif, sta);
+ if (ret)
+ ath10k_warn(ar, "failed to disassociate station: %pM vdev %i: %i\n",
+ sta->addr, arvif->vdev_id, ret);
+ }
+exit:
+ mutex_unlock(&ar->conf_mutex);
+ return ret;
+}
+
+static int ath10k_conf_tx_uapsd(struct ath10k *ar, struct ieee80211_vif *vif,
+ u16 ac, bool enable)
+{
+ struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+ struct wmi_sta_uapsd_auto_trig_arg arg = {};
+ u32 prio = 0, acc = 0;
+ u32 value = 0;
+ int ret = 0;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ if (arvif->vdev_type != WMI_VDEV_TYPE_STA)
+ return 0;
+
+ switch (ac) {
+ case IEEE80211_AC_VO:
+ value = WMI_STA_PS_UAPSD_AC3_DELIVERY_EN |
+ WMI_STA_PS_UAPSD_AC3_TRIGGER_EN;
+ prio = 7;
+ acc = 3;
+ break;
+ case IEEE80211_AC_VI:
+ value = WMI_STA_PS_UAPSD_AC2_DELIVERY_EN |
+ WMI_STA_PS_UAPSD_AC2_TRIGGER_EN;
+ prio = 5;
+ acc = 2;
+ break;
+ case IEEE80211_AC_BE:
+ value = WMI_STA_PS_UAPSD_AC1_DELIVERY_EN |
+ WMI_STA_PS_UAPSD_AC1_TRIGGER_EN;
+ prio = 2;
+ acc = 1;
+ break;
+ case IEEE80211_AC_BK:
+ value = WMI_STA_PS_UAPSD_AC0_DELIVERY_EN |
+ WMI_STA_PS_UAPSD_AC0_TRIGGER_EN;
+ prio = 0;
+ acc = 0;
+ break;
+ }
+
+ if (enable)
+ arvif->u.sta.uapsd |= value;
+ else
+ arvif->u.sta.uapsd &= ~value;
+
+ ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
+ WMI_STA_PS_PARAM_UAPSD,
+ arvif->u.sta.uapsd);
+ if (ret) {
+ ath10k_warn(ar, "failed to set uapsd params: %d\n", ret);
+ goto exit;
+ }
+
+ if (arvif->u.sta.uapsd)
+ value = WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD;
+ else
+ value = WMI_STA_PS_RX_WAKE_POLICY_WAKE;
+
+ ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
+ WMI_STA_PS_PARAM_RX_WAKE_POLICY,
+ value);
+ if (ret)
+ ath10k_warn(ar, "failed to set rx wake param: %d\n", ret);
+
+ ret = ath10k_mac_vif_recalc_ps_wake_threshold(arvif);
+ if (ret) {
+ ath10k_warn(ar, "failed to recalc ps wake threshold on vdev %i: %d\n",
+ arvif->vdev_id, ret);
+ return ret;
+ }
+
+ ret = ath10k_mac_vif_recalc_ps_poll_count(arvif);
+ if (ret) {
+ ath10k_warn(ar, "failed to recalc ps poll count on vdev %i: %d\n",
+ arvif->vdev_id, ret);
+ return ret;
+ }
+
+ if (test_bit(WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, ar->wmi.svc_map) ||
+ test_bit(WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, ar->wmi.svc_map)) {
+ /* Only userspace can make an educated decision when to send
+ * trigger frame. The following effectively disables u-UAPSD
+ * autotrigger in firmware (which is enabled by default
+ * provided the autotrigger service is available).
+ */
+
+ arg.wmm_ac = acc;
+ arg.user_priority = prio;
+ arg.service_interval = 0;
+ arg.suspend_interval = WMI_STA_UAPSD_MAX_INTERVAL_MSEC;
+ arg.delay_interval = WMI_STA_UAPSD_MAX_INTERVAL_MSEC;
+
+ ret = ath10k_wmi_vdev_sta_uapsd(ar, arvif->vdev_id,
+ arvif->bssid, &arg, 1);
+ if (ret) {
+ ath10k_warn(ar, "failed to set uapsd auto trigger %d\n",
+ ret);
+ return ret;
+ }
+ }
+
+exit:
+ return ret;
+}
+
+static int ath10k_conf_tx(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif, u16 ac,
+ const struct ieee80211_tx_queue_params *params)
+{
+ struct ath10k *ar = hw->priv;
+ struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+ struct wmi_wmm_params_arg *p = NULL;
+ int ret;
+
+ mutex_lock(&ar->conf_mutex);
+
+ switch (ac) {
+ case IEEE80211_AC_VO:
+ p = &arvif->wmm_params.ac_vo;
+ break;
+ case IEEE80211_AC_VI:
+ p = &arvif->wmm_params.ac_vi;
+ break;
+ case IEEE80211_AC_BE:
+ p = &arvif->wmm_params.ac_be;
+ break;
+ case IEEE80211_AC_BK:
+ p = &arvif->wmm_params.ac_bk;
+ break;
+ }
+
+ if (WARN_ON(!p)) {
+ ret = -EINVAL;
+ goto exit;
+ }
+
+ p->cwmin = params->cw_min;
+ p->cwmax = params->cw_max;
+ p->aifs = params->aifs;
+
+ /*
+ * The channel time duration programmed in the HW is in absolute
+ * microseconds, while mac80211 gives the txop in units of
+ * 32 microseconds.
+ */
+ p->txop = params->txop * 32;
+
+ if (ar->wmi.ops->gen_vdev_wmm_conf) {
+ ret = ath10k_wmi_vdev_wmm_conf(ar, arvif->vdev_id,
+ &arvif->wmm_params);
+ if (ret) {
+ ath10k_warn(ar, "failed to set vdev wmm params on vdev %i: %d\n",
+ arvif->vdev_id, ret);
+ goto exit;
+ }
+ } else {
+ /* This won't work well with multi-interface cases but it's
+ * better than nothing.
+ */
+ ret = ath10k_wmi_pdev_set_wmm_params(ar, &arvif->wmm_params);
+ if (ret) {
+ ath10k_warn(ar, "failed to set wmm params: %d\n", ret);
+ goto exit;
+ }
+ }
+
+ ret = ath10k_conf_tx_uapsd(ar, vif, ac, params->uapsd);
+ if (ret)
+ ath10k_warn(ar, "failed to set sta uapsd: %d\n", ret);
+
+exit:
+ mutex_unlock(&ar->conf_mutex);
+ return ret;
+}
+
+#define ATH10K_ROC_TIMEOUT_HZ (2*HZ)
+
+static int ath10k_remain_on_channel(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_channel *chan,
+ int duration,
+ enum ieee80211_roc_type type)
+{
+ struct ath10k *ar = hw->priv;
+ struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+ struct wmi_start_scan_arg arg;
+ int ret = 0;
+
+ mutex_lock(&ar->conf_mutex);
+
+ spin_lock_bh(&ar->data_lock);
+ switch (ar->scan.state) {
+ case ATH10K_SCAN_IDLE:
+ reinit_completion(&ar->scan.started);
+ reinit_completion(&ar->scan.completed);
+ reinit_completion(&ar->scan.on_channel);
+ ar->scan.state = ATH10K_SCAN_STARTING;
+ ar->scan.is_roc = true;
+ ar->scan.vdev_id = arvif->vdev_id;
+ ar->scan.roc_freq = chan->center_freq;
+ ret = 0;
+ break;
+ case ATH10K_SCAN_STARTING:
+ case ATH10K_SCAN_RUNNING:
+ case ATH10K_SCAN_ABORTING:
+ ret = -EBUSY;
+ break;
+ }
+ spin_unlock_bh(&ar->data_lock);
+
+ if (ret)
+ goto exit;
+
+ duration = max(duration, WMI_SCAN_CHAN_MIN_TIME_MSEC);
+
+ memset(&arg, 0, sizeof(arg));
+ ath10k_wmi_start_scan_init(ar, &arg);
+ arg.vdev_id = arvif->vdev_id;
+ arg.scan_id = ATH10K_SCAN_ID;
+ arg.n_channels = 1;
+ arg.channels[0] = chan->center_freq;
+ arg.dwell_time_active = duration;
+ arg.dwell_time_passive = duration;
+ arg.max_scan_time = 2 * duration;
+ arg.scan_ctrl_flags |= WMI_SCAN_FLAG_PASSIVE;
+ arg.scan_ctrl_flags |= WMI_SCAN_FILTER_PROBE_REQ;
+
+ ret = ath10k_start_scan(ar, &arg);
+ if (ret) {
+ ath10k_warn(ar, "failed to start roc scan: %d\n", ret);
+ spin_lock_bh(&ar->data_lock);
+ ar->scan.state = ATH10K_SCAN_IDLE;
+ spin_unlock_bh(&ar->data_lock);
+ goto exit;
+ }
+
+ ret = wait_for_completion_timeout(&ar->scan.on_channel, 3*HZ);
+ if (ret == 0) {
+ ath10k_warn(ar, "failed to switch to channel for roc scan\n");
+
+ ret = ath10k_scan_stop(ar);
+ if (ret)
+ ath10k_warn(ar, "failed to stop scan: %d\n", ret);
+
+ ret = -ETIMEDOUT;
+ goto exit;
+ }
+
+ ret = 0;
+exit:
+ mutex_unlock(&ar->conf_mutex);
+ return ret;
+}
+
+static int ath10k_cancel_remain_on_channel(struct ieee80211_hw *hw)
+{
+ struct ath10k *ar = hw->priv;
+
+ mutex_lock(&ar->conf_mutex);
+ ath10k_scan_abort(ar);
+ mutex_unlock(&ar->conf_mutex);
+
+ cancel_delayed_work_sync(&ar->scan.timeout);
+
+ return 0;
+}
+
+/*
+ * Both RTS and Fragmentation threshold are interface-specific
+ * in ath10k, but device-specific in mac80211.
+ */
+
+static int ath10k_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
+{
+ struct ath10k *ar = hw->priv;
+ struct ath10k_vif *arvif;
+ int ret = 0;
+
+ mutex_lock(&ar->conf_mutex);
+ list_for_each_entry(arvif, &ar->arvifs, list) {
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d rts threshold %d\n",
+ arvif->vdev_id, value);
+
+ ret = ath10k_mac_set_rts(arvif, value);
+ if (ret) {
+ ath10k_warn(ar, "failed to set rts threshold for vdev %d: %d\n",
+ arvif->vdev_id, ret);
+ break;
+ }
+ }
+ mutex_unlock(&ar->conf_mutex);
+
+ return ret;
+}
+
+static void ath10k_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+ u32 queues, bool drop)
+{
+ struct ath10k *ar = hw->priv;
+ bool skip;
+ int ret;
+
+ /* mac80211 doesn't care if we really xmit queued frames or not
+ * we'll collect those frames either way if we stop/delete vdevs */
+ if (drop)
+ return;
+
+ mutex_lock(&ar->conf_mutex);
+
+ if (ar->state == ATH10K_STATE_WEDGED)
+ goto skip;
+
+ ret = wait_event_timeout(ar->htt.empty_tx_wq, ({
+ bool empty;
+
+ spin_lock_bh(&ar->htt.tx_lock);
+ empty = (ar->htt.num_pending_tx == 0);
+ spin_unlock_bh(&ar->htt.tx_lock);
+
+ skip = (ar->state == ATH10K_STATE_WEDGED) ||
+ test_bit(ATH10K_FLAG_CRASH_FLUSH,
+ &ar->dev_flags);
+
+ (empty || skip);
+ }), ATH10K_FLUSH_TIMEOUT_HZ);
+
+ if (ret <= 0 || skip)
+ ath10k_warn(ar, "failed to flush transmit queue (skip %i ar-state %i): %i\n",
+ skip, ar->state, ret);
+
+skip:
+ mutex_unlock(&ar->conf_mutex);
+}
+
+/* TODO: Implement this function properly
+ * For now it is needed to reply to Probe Requests in IBSS mode.
+ * Propably we need this information from FW.
+ */
+static int ath10k_tx_last_beacon(struct ieee80211_hw *hw)
+{
+ return 1;
+}
+
+#ifdef CONFIG_PM
+static int ath10k_suspend(struct ieee80211_hw *hw,
+ struct cfg80211_wowlan *wowlan)
+{
+ struct ath10k *ar = hw->priv;
+ int ret;
+
+ mutex_lock(&ar->conf_mutex);
+
+ ret = ath10k_wait_for_suspend(ar, WMI_PDEV_SUSPEND);
+ if (ret) {
+ if (ret == -ETIMEDOUT)
+ goto resume;
+ ret = 1;
+ goto exit;
+ }
+
+ ret = ath10k_hif_suspend(ar);
+ if (ret) {
+ ath10k_warn(ar, "failed to suspend hif: %d\n", ret);
+ goto resume;
+ }
+
+ ret = 0;
+ goto exit;
+resume:
+ ret = ath10k_wmi_pdev_resume_target(ar);
+ if (ret)
+ ath10k_warn(ar, "failed to resume target: %d\n", ret);
+
+ ret = 1;
+exit:
+ mutex_unlock(&ar->conf_mutex);
+ return ret;
+}
+
+static int ath10k_resume(struct ieee80211_hw *hw)
+{
+ struct ath10k *ar = hw->priv;
+ int ret;
+
+ mutex_lock(&ar->conf_mutex);
+
+ ret = ath10k_hif_resume(ar);
+ if (ret) {
+ ath10k_warn(ar, "failed to resume hif: %d\n", ret);
+ ret = 1;
+ goto exit;
+ }
+
+ ret = ath10k_wmi_pdev_resume_target(ar);
+ if (ret) {
+ ath10k_warn(ar, "failed to resume target: %d\n", ret);
+ ret = 1;
+ goto exit;
+ }
+
+ ret = 0;
+exit:
+ mutex_unlock(&ar->conf_mutex);
+ return ret;
+}
+#endif
+
+static void ath10k_reconfig_complete(struct ieee80211_hw *hw,
+ enum ieee80211_reconfig_type reconfig_type)
+{
+ struct ath10k *ar = hw->priv;
+
+ if (reconfig_type != IEEE80211_RECONFIG_TYPE_RESTART)
+ return;
+
+ mutex_lock(&ar->conf_mutex);
+
+ /* If device failed to restart it will be in a different state, e.g.
+ * ATH10K_STATE_WEDGED */
+ if (ar->state == ATH10K_STATE_RESTARTED) {
+ ath10k_info(ar, "device successfully recovered\n");
+ ar->state = ATH10K_STATE_ON;
+ ieee80211_wake_queues(ar->hw);
+ }
+
+ mutex_unlock(&ar->conf_mutex);
+}
+
+static int ath10k_get_survey(struct ieee80211_hw *hw, int idx,
+ struct survey_info *survey)
+{
+ struct ath10k *ar = hw->priv;
+ struct ieee80211_supported_band *sband;
+ struct survey_info *ar_survey = &ar->survey[idx];
+ int ret = 0;
+
+ mutex_lock(&ar->conf_mutex);
+
+ sband = hw->wiphy->bands[IEEE80211_BAND_2GHZ];
+ if (sband && idx >= sband->n_channels) {
+ idx -= sband->n_channels;
+ sband = NULL;
+ }
+
+ if (!sband)
+ sband = hw->wiphy->bands[IEEE80211_BAND_5GHZ];
+
+ if (!sband || idx >= sband->n_channels) {
+ ret = -ENOENT;
+ goto exit;
+ }
+
+ spin_lock_bh(&ar->data_lock);
+ memcpy(survey, ar_survey, sizeof(*survey));
+ spin_unlock_bh(&ar->data_lock);
+
+ survey->channel = &sband->channels[idx];
+
+ if (ar->rx_channel == survey->channel)
+ survey->filled |= SURVEY_INFO_IN_USE;
+
+exit:
+ mutex_unlock(&ar->conf_mutex);
+ return ret;
+}
+
+/* Helper table for legacy fixed_rate/bitrate_mask */
+static const u8 cck_ofdm_rate[] = {
+ /* CCK */
+ 3, /* 1Mbps */
+ 2, /* 2Mbps */
+ 1, /* 5.5Mbps */
+ 0, /* 11Mbps */
+ /* OFDM */
+ 3, /* 6Mbps */
+ 7, /* 9Mbps */
+ 2, /* 12Mbps */
+ 6, /* 18Mbps */
+ 1, /* 24Mbps */
+ 5, /* 36Mbps */
+ 0, /* 48Mbps */
+ 4, /* 54Mbps */
+};
+
+/* Check if only one bit set */
+static int ath10k_check_single_mask(u32 mask)
+{
+ int bit;
+
+ bit = ffs(mask);
+ if (!bit)
+ return 0;
+
+ mask &= ~BIT(bit - 1);
+ if (mask)
+ return 2;
+
+ return 1;
+}
+
+static bool
+ath10k_default_bitrate_mask(struct ath10k *ar,
+ enum ieee80211_band band,
+ const struct cfg80211_bitrate_mask *mask)
+{
+ u32 legacy = 0x00ff;
+ u8 ht = 0xff, i;
+ u16 vht = 0x3ff;
+ u16 nrf = ar->num_rf_chains;
+
+ if (ar->cfg_tx_chainmask)
+ nrf = get_nss_from_chainmask(ar->cfg_tx_chainmask);
+
+ switch (band) {
+ case IEEE80211_BAND_2GHZ:
+ legacy = 0x00fff;
+ vht = 0;
+ break;
+ case IEEE80211_BAND_5GHZ:
+ break;
+ default:
+ return false;
+ }
+
+ if (mask->control[band].legacy != legacy)
+ return false;
+
+ for (i = 0; i < nrf; i++)
+ if (mask->control[band].ht_mcs[i] != ht)
+ return false;
+
+ for (i = 0; i < nrf; i++)
+ if (mask->control[band].vht_mcs[i] != vht)
+ return false;
+
+ return true;
+}
+
+static bool
+ath10k_bitrate_mask_nss(const struct cfg80211_bitrate_mask *mask,
+ enum ieee80211_band band,
+ u8 *fixed_nss)
+{
+ int ht_nss = 0, vht_nss = 0, i;
+
+ /* check legacy */
+ if (ath10k_check_single_mask(mask->control[band].legacy))
+ return false;
+
+ /* check HT */
+ for (i = 0; i < IEEE80211_HT_MCS_MASK_LEN; i++) {
+ if (mask->control[band].ht_mcs[i] == 0xff)
+ continue;
+ else if (mask->control[band].ht_mcs[i] == 0x00)
+ break;
+
+ return false;
+ }
+
+ ht_nss = i;
+
+ /* check VHT */
+ for (i = 0; i < NL80211_VHT_NSS_MAX; i++) {
+ if (mask->control[band].vht_mcs[i] == 0x03ff)
+ continue;
+ else if (mask->control[band].vht_mcs[i] == 0x0000)
+ break;
+
+ return false;
+ }
+
+ vht_nss = i;
+
+ if (ht_nss > 0 && vht_nss > 0)
+ return false;
+
+ if (ht_nss)
+ *fixed_nss = ht_nss;
+ else if (vht_nss)
+ *fixed_nss = vht_nss;
+ else
+ return false;
+
+ return true;
+}
+
+static bool
+ath10k_bitrate_mask_correct(const struct cfg80211_bitrate_mask *mask,
+ enum ieee80211_band band,
+ enum wmi_rate_preamble *preamble)
+{
+ int legacy = 0, ht = 0, vht = 0, i;
+
+ *preamble = WMI_RATE_PREAMBLE_OFDM;
+
+ /* check legacy */
+ legacy = ath10k_check_single_mask(mask->control[band].legacy);
+ if (legacy > 1)
+ return false;
+
+ /* check HT */
+ for (i = 0; i < IEEE80211_HT_MCS_MASK_LEN; i++)
+ ht += ath10k_check_single_mask(mask->control[band].ht_mcs[i]);
+ if (ht > 1)
+ return false;
+
+ /* check VHT */
+ for (i = 0; i < NL80211_VHT_NSS_MAX; i++)
+ vht += ath10k_check_single_mask(mask->control[band].vht_mcs[i]);
+ if (vht > 1)
+ return false;
+
+ /* Currently we support only one fixed_rate */
+ if ((legacy + ht + vht) != 1)
+ return false;
+
+ if (ht)
+ *preamble = WMI_RATE_PREAMBLE_HT;
+ else if (vht)
+ *preamble = WMI_RATE_PREAMBLE_VHT;
+
+ return true;
+}
+
+static bool
+ath10k_bitrate_mask_rate(struct ath10k *ar,
+ const struct cfg80211_bitrate_mask *mask,
+ enum ieee80211_band band,
+ u8 *fixed_rate,
+ u8 *fixed_nss)
+{
+ u8 rate = 0, pream = 0, nss = 0, i;
+ enum wmi_rate_preamble preamble;
+
+ /* Check if single rate correct */
+ if (!ath10k_bitrate_mask_correct(mask, band, &preamble))
+ return false;
+
+ pream = preamble;
+
+ switch (preamble) {
+ case WMI_RATE_PREAMBLE_CCK:
+ case WMI_RATE_PREAMBLE_OFDM:
+ i = ffs(mask->control[band].legacy) - 1;
+
+ if (band == IEEE80211_BAND_2GHZ && i < 4)
+ pream = WMI_RATE_PREAMBLE_CCK;
+
+ if (band == IEEE80211_BAND_5GHZ)
+ i += 4;
+
+ if (i >= ARRAY_SIZE(cck_ofdm_rate))
+ return false;
+
+ rate = cck_ofdm_rate[i];
+ break;
+ case WMI_RATE_PREAMBLE_HT:
+ for (i = 0; i < IEEE80211_HT_MCS_MASK_LEN; i++)
+ if (mask->control[band].ht_mcs[i])
+ break;
+
+ if (i == IEEE80211_HT_MCS_MASK_LEN)
+ return false;
+
+ rate = ffs(mask->control[band].ht_mcs[i]) - 1;
+ nss = i;
+ break;
+ case WMI_RATE_PREAMBLE_VHT:
+ for (i = 0; i < NL80211_VHT_NSS_MAX; i++)
+ if (mask->control[band].vht_mcs[i])
+ break;
+
+ if (i == NL80211_VHT_NSS_MAX)
+ return false;
+
+ rate = ffs(mask->control[band].vht_mcs[i]) - 1;
+ nss = i;
+ break;
+ }
+
+ *fixed_nss = nss + 1;
+ nss <<= 4;
+ pream <<= 6;
+
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac fixed rate pream 0x%02x nss 0x%02x rate 0x%02x\n",
+ pream, nss, rate);
+
+ *fixed_rate = pream | nss | rate;
+
+ return true;
+}
+
+static bool ath10k_get_fixed_rate_nss(struct ath10k *ar,
+ const struct cfg80211_bitrate_mask *mask,
+ enum ieee80211_band band,
+ u8 *fixed_rate,
+ u8 *fixed_nss)
+{
+ /* First check full NSS mask, if we can simply limit NSS */
+ if (ath10k_bitrate_mask_nss(mask, band, fixed_nss))
+ return true;
+
+ /* Next Check single rate is set */
+ return ath10k_bitrate_mask_rate(ar, mask, band, fixed_rate, fixed_nss);
+}
+
+static int ath10k_set_fixed_rate_param(struct ath10k_vif *arvif,
+ u8 fixed_rate,
+ u8 fixed_nss,
+ u8 force_sgi)
+{
+ struct ath10k *ar = arvif->ar;
+ u32 vdev_param;
+ int ret = 0;
+
+ mutex_lock(&ar->conf_mutex);
+
+ if (arvif->fixed_rate == fixed_rate &&
+ arvif->fixed_nss == fixed_nss &&
+ arvif->force_sgi == force_sgi)
+ goto exit;
+
+ if (fixed_rate == WMI_FIXED_RATE_NONE)
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac disable fixed bitrate mask\n");
+
+ if (force_sgi)
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac force sgi\n");
+
+ vdev_param = ar->wmi.vdev_param->fixed_rate;
+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
+ vdev_param, fixed_rate);
+ if (ret) {
+ ath10k_warn(ar, "failed to set fixed rate param 0x%02x: %d\n",
+ fixed_rate, ret);
+ ret = -EINVAL;
+ goto exit;
+ }
+
+ arvif->fixed_rate = fixed_rate;
+
+ vdev_param = ar->wmi.vdev_param->nss;
+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
+ vdev_param, fixed_nss);
+
+ if (ret) {
+ ath10k_warn(ar, "failed to set fixed nss param %d: %d\n",
+ fixed_nss, ret);
+ ret = -EINVAL;
+ goto exit;
+ }
+
+ arvif->fixed_nss = fixed_nss;
+
+ vdev_param = ar->wmi.vdev_param->sgi;
+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
+ force_sgi);
+
+ if (ret) {
+ ath10k_warn(ar, "failed to set sgi param %d: %d\n",
+ force_sgi, ret);
+ ret = -EINVAL;
+ goto exit;
+ }
+
+ arvif->force_sgi = force_sgi;
+
+exit:
+ mutex_unlock(&ar->conf_mutex);
+ return ret;
+}
+
+static int ath10k_set_bitrate_mask(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ const struct cfg80211_bitrate_mask *mask)
+{
+ struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+ struct ath10k *ar = arvif->ar;
+ enum ieee80211_band band = ar->hw->conf.chandef.chan->band;
+ u8 fixed_rate = WMI_FIXED_RATE_NONE;
+ u8 fixed_nss = ar->num_rf_chains;
+ u8 force_sgi;
+
+ if (ar->cfg_tx_chainmask)
+ fixed_nss = get_nss_from_chainmask(ar->cfg_tx_chainmask);
+
+ force_sgi = mask->control[band].gi;
+ if (force_sgi == NL80211_TXRATE_FORCE_LGI)
+ return -EINVAL;
+
+ if (!ath10k_default_bitrate_mask(ar, band, mask)) {
+ if (!ath10k_get_fixed_rate_nss(ar, mask, band,
+ &fixed_rate,
+ &fixed_nss))
+ return -EINVAL;
+ }
+
+ if (fixed_rate == WMI_FIXED_RATE_NONE && force_sgi) {
+ ath10k_warn(ar, "failed to force SGI usage for default rate settings\n");
+ return -EINVAL;
+ }
+
+ return ath10k_set_fixed_rate_param(arvif, fixed_rate,
+ fixed_nss, force_sgi);
+}
+
+static void ath10k_sta_rc_update(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta,
+ u32 changed)
+{
+ struct ath10k *ar = hw->priv;
+ struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
+ u32 bw, smps;
+
+ spin_lock_bh(&ar->data_lock);
+
+ ath10k_dbg(ar, ATH10K_DBG_MAC,
+ "mac sta rc update for %pM changed %08x bw %d nss %d smps %d\n",
+ sta->addr, changed, sta->bandwidth, sta->rx_nss,
+ sta->smps_mode);
+
+ if (changed & IEEE80211_RC_BW_CHANGED) {
+ bw = WMI_PEER_CHWIDTH_20MHZ;
+
+ switch (sta->bandwidth) {
+ case IEEE80211_STA_RX_BW_20:
+ bw = WMI_PEER_CHWIDTH_20MHZ;
+ break;
+ case IEEE80211_STA_RX_BW_40:
+ bw = WMI_PEER_CHWIDTH_40MHZ;
+ break;
+ case IEEE80211_STA_RX_BW_80:
+ bw = WMI_PEER_CHWIDTH_80MHZ;
+ break;
+ case IEEE80211_STA_RX_BW_160:
+ ath10k_warn(ar, "Invalid bandwidth %d in rc update for %pM\n",
+ sta->bandwidth, sta->addr);
+ bw = WMI_PEER_CHWIDTH_20MHZ;
+ break;
+ }
+
+ arsta->bw = bw;
+ }
+
+ if (changed & IEEE80211_RC_NSS_CHANGED)
+ arsta->nss = sta->rx_nss;
+
+ if (changed & IEEE80211_RC_SMPS_CHANGED) {
+ smps = WMI_PEER_SMPS_PS_NONE;
+
+ switch (sta->smps_mode) {
+ case IEEE80211_SMPS_AUTOMATIC:
+ case IEEE80211_SMPS_OFF:
+ smps = WMI_PEER_SMPS_PS_NONE;
+ break;
+ case IEEE80211_SMPS_STATIC:
+ smps = WMI_PEER_SMPS_STATIC;
+ break;
+ case IEEE80211_SMPS_DYNAMIC:
+ smps = WMI_PEER_SMPS_DYNAMIC;
+ break;
+ case IEEE80211_SMPS_NUM_MODES:
+ ath10k_warn(ar, "Invalid smps %d in sta rc update for %pM\n",
+ sta->smps_mode, sta->addr);
+ smps = WMI_PEER_SMPS_PS_NONE;
+ break;
+ }
+
+ arsta->smps = smps;
+ }
+
+ arsta->changed |= changed;
+
+ spin_unlock_bh(&ar->data_lock);
+
+ ieee80211_queue_work(hw, &arsta->update_wk);
+}
+
+static u64 ath10k_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
+{
+ /*
+ * FIXME: Return 0 for time being. Need to figure out whether FW
+ * has the API to fetch 64-bit local TSF
+ */
+
+ return 0;
+}
+
+static int ath10k_ampdu_action(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ enum ieee80211_ampdu_mlme_action action,
+ struct ieee80211_sta *sta, u16 tid, u16 *ssn,
+ u8 buf_size)
+{
+ struct ath10k *ar = hw->priv;
+ struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac ampdu vdev_id %i sta %pM tid %hu action %d\n",
+ arvif->vdev_id, sta->addr, tid, action);
+
+ switch (action) {
+ case IEEE80211_AMPDU_RX_START:
+ case IEEE80211_AMPDU_RX_STOP:
+ /* HTT AddBa/DelBa events trigger mac80211 Rx BA session
+ * creation/removal. Do we need to verify this?
+ */
+ return 0;
+ case IEEE80211_AMPDU_TX_START:
+ case IEEE80211_AMPDU_TX_STOP_CONT:
+ case IEEE80211_AMPDU_TX_STOP_FLUSH:
+ case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT:
+ case IEEE80211_AMPDU_TX_OPERATIONAL:
+ /* Firmware offloads Tx aggregation entirely so deny mac80211
+ * Tx aggregation requests.
+ */
+ return -EOPNOTSUPP;
+ }
+
+ return -EINVAL;
+}
+
+static const struct ieee80211_ops ath10k_ops = {
+ .tx = ath10k_tx,
+ .start = ath10k_start,
+ .stop = ath10k_stop,
+ .config = ath10k_config,
+ .add_interface = ath10k_add_interface,
+ .remove_interface = ath10k_remove_interface,
+ .configure_filter = ath10k_configure_filter,
+ .bss_info_changed = ath10k_bss_info_changed,
+ .hw_scan = ath10k_hw_scan,
+ .cancel_hw_scan = ath10k_cancel_hw_scan,
+ .set_key = ath10k_set_key,
+ .set_default_unicast_key = ath10k_set_default_unicast_key,
+ .sta_state = ath10k_sta_state,
+ .conf_tx = ath10k_conf_tx,
+ .remain_on_channel = ath10k_remain_on_channel,
+ .cancel_remain_on_channel = ath10k_cancel_remain_on_channel,
+ .set_rts_threshold = ath10k_set_rts_threshold,
+ .flush = ath10k_flush,
+ .tx_last_beacon = ath10k_tx_last_beacon,
+ .set_antenna = ath10k_set_antenna,
+ .get_antenna = ath10k_get_antenna,
+ .reconfig_complete = ath10k_reconfig_complete,
+ .get_survey = ath10k_get_survey,
+ .set_bitrate_mask = ath10k_set_bitrate_mask,
+ .sta_rc_update = ath10k_sta_rc_update,
+ .get_tsf = ath10k_get_tsf,
+ .ampdu_action = ath10k_ampdu_action,
+ .get_et_sset_count = ath10k_debug_get_et_sset_count,
+ .get_et_stats = ath10k_debug_get_et_stats,
+ .get_et_strings = ath10k_debug_get_et_strings,
+
+ CFG80211_TESTMODE_CMD(ath10k_tm_cmd)
+
+#ifdef CONFIG_PM
+ .suspend = ath10k_suspend,
+ .resume = ath10k_resume,
+#endif
+#ifdef CONFIG_MAC80211_DEBUGFS
+ .sta_add_debugfs = ath10k_sta_add_debugfs,
+#endif
+};
+
+#define RATETAB_ENT(_rate, _rateid, _flags) { \
+ .bitrate = (_rate), \
+ .flags = (_flags), \
+ .hw_value = (_rateid), \
+}
+
+#define CHAN2G(_channel, _freq, _flags) { \
+ .band = IEEE80211_BAND_2GHZ, \
+ .hw_value = (_channel), \
+ .center_freq = (_freq), \
+ .flags = (_flags), \
+ .max_antenna_gain = 0, \
+ .max_power = 30, \
+}
+
+#define CHAN5G(_channel, _freq, _flags) { \
+ .band = IEEE80211_BAND_5GHZ, \
+ .hw_value = (_channel), \
+ .center_freq = (_freq), \
+ .flags = (_flags), \
+ .max_antenna_gain = 0, \
+ .max_power = 30, \
+}
+
+static const struct ieee80211_channel ath10k_2ghz_channels[] = {
+ CHAN2G(1, 2412, 0),
+ CHAN2G(2, 2417, 0),
+ CHAN2G(3, 2422, 0),
+ CHAN2G(4, 2427, 0),
+ CHAN2G(5, 2432, 0),
+ CHAN2G(6, 2437, 0),
+ CHAN2G(7, 2442, 0),
+ CHAN2G(8, 2447, 0),
+ CHAN2G(9, 2452, 0),
+ CHAN2G(10, 2457, 0),
+ CHAN2G(11, 2462, 0),
+ CHAN2G(12, 2467, 0),
+ CHAN2G(13, 2472, 0),
+ CHAN2G(14, 2484, 0),
+};
+
+static const struct ieee80211_channel ath10k_5ghz_channels[] = {
+ CHAN5G(36, 5180, 0),
+ CHAN5G(40, 5200, 0),
+ CHAN5G(44, 5220, 0),
+ CHAN5G(48, 5240, 0),
+ CHAN5G(52, 5260, 0),
+ CHAN5G(56, 5280, 0),
+ CHAN5G(60, 5300, 0),
+ CHAN5G(64, 5320, 0),
+ CHAN5G(100, 5500, 0),
+ CHAN5G(104, 5520, 0),
+ CHAN5G(108, 5540, 0),
+ CHAN5G(112, 5560, 0),
+ CHAN5G(116, 5580, 0),
+ CHAN5G(120, 5600, 0),
+ CHAN5G(124, 5620, 0),
+ CHAN5G(128, 5640, 0),
+ CHAN5G(132, 5660, 0),
+ CHAN5G(136, 5680, 0),
+ CHAN5G(140, 5700, 0),
+ CHAN5G(149, 5745, 0),
+ CHAN5G(153, 5765, 0),
+ CHAN5G(157, 5785, 0),
+ CHAN5G(161, 5805, 0),
+ CHAN5G(165, 5825, 0),
+};
+
+/* Note: Be careful if you re-order these. There is code which depends on this
+ * ordering.
+ */
+static struct ieee80211_rate ath10k_rates[] = {
+ /* CCK */
+ RATETAB_ENT(10, 0x82, 0),
+ RATETAB_ENT(20, 0x84, 0),
+ RATETAB_ENT(55, 0x8b, 0),
+ RATETAB_ENT(110, 0x96, 0),
+ /* OFDM */
+ RATETAB_ENT(60, 0x0c, 0),
+ RATETAB_ENT(90, 0x12, 0),
+ RATETAB_ENT(120, 0x18, 0),
+ RATETAB_ENT(180, 0x24, 0),
+ RATETAB_ENT(240, 0x30, 0),
+ RATETAB_ENT(360, 0x48, 0),
+ RATETAB_ENT(480, 0x60, 0),
+ RATETAB_ENT(540, 0x6c, 0),
+};
+
+#define ath10k_a_rates (ath10k_rates + 4)
+#define ath10k_a_rates_size (ARRAY_SIZE(ath10k_rates) - 4)
+#define ath10k_g_rates (ath10k_rates + 0)
+#define ath10k_g_rates_size (ARRAY_SIZE(ath10k_rates))
+
+struct ath10k *ath10k_mac_create(size_t priv_size)
+{
+ struct ieee80211_hw *hw;
+ struct ath10k *ar;
+
+ hw = ieee80211_alloc_hw(sizeof(struct ath10k) + priv_size, &ath10k_ops);
+ if (!hw)
+ return NULL;
+
+ ar = hw->priv;
+ ar->hw = hw;
+
+ return ar;
+}
+
+void ath10k_mac_destroy(struct ath10k *ar)
+{
+ ieee80211_free_hw(ar->hw);
+}
+
+static const struct ieee80211_iface_limit ath10k_if_limits[] = {
+ {
+ .max = 8,
+ .types = BIT(NL80211_IFTYPE_STATION)
+ | BIT(NL80211_IFTYPE_P2P_CLIENT)
+ },
+ {
+ .max = 3,
+ .types = BIT(NL80211_IFTYPE_P2P_GO)
+ },
+ {
+ .max = 1,
+ .types = BIT(NL80211_IFTYPE_P2P_DEVICE)
+ },
+ {
+ .max = 7,
+ .types = BIT(NL80211_IFTYPE_AP)
+ },
+};
+
+static const struct ieee80211_iface_limit ath10k_10x_if_limits[] = {
+ {
+ .max = 8,
+ .types = BIT(NL80211_IFTYPE_AP)
+ },
+};
+
+static const struct ieee80211_iface_combination ath10k_if_comb[] = {
+ {
+ .limits = ath10k_if_limits,
+ .n_limits = ARRAY_SIZE(ath10k_if_limits),
+ .max_interfaces = 8,
+ .num_different_channels = 1,
+ .beacon_int_infra_match = true,
+ },
+};
+
+static const struct ieee80211_iface_combination ath10k_10x_if_comb[] = {
+ {
+ .limits = ath10k_10x_if_limits,
+ .n_limits = ARRAY_SIZE(ath10k_10x_if_limits),
+ .max_interfaces = 8,
+ .num_different_channels = 1,
+ .beacon_int_infra_match = true,
+#ifdef CONFIG_ATH10K_DFS_CERTIFIED
+ .radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) |
+ BIT(NL80211_CHAN_WIDTH_20) |
+ BIT(NL80211_CHAN_WIDTH_40) |
+ BIT(NL80211_CHAN_WIDTH_80),
+#endif
+ },
+};
+
+static struct ieee80211_sta_vht_cap ath10k_create_vht_cap(struct ath10k *ar)
+{
+ struct ieee80211_sta_vht_cap vht_cap = {0};
+ u16 mcs_map;
+ int i;
+
+ vht_cap.vht_supported = 1;
+ vht_cap.cap = ar->vht_cap_info;
+
+ mcs_map = 0;
+ for (i = 0; i < 8; i++) {
+ if (i < ar->num_rf_chains)
+ mcs_map |= IEEE80211_VHT_MCS_SUPPORT_0_9 << (i*2);
+ else
+ mcs_map |= IEEE80211_VHT_MCS_NOT_SUPPORTED << (i*2);
+ }
+
+ vht_cap.vht_mcs.rx_mcs_map = cpu_to_le16(mcs_map);
+ vht_cap.vht_mcs.tx_mcs_map = cpu_to_le16(mcs_map);
+
+ return vht_cap;
+}
+
+static struct ieee80211_sta_ht_cap ath10k_get_ht_cap(struct ath10k *ar)
+{
+ int i;
+ struct ieee80211_sta_ht_cap ht_cap = {0};
+
+ if (!(ar->ht_cap_info & WMI_HT_CAP_ENABLED))
+ return ht_cap;
+
+ ht_cap.ht_supported = 1;
+ ht_cap.ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
+ ht_cap.ampdu_density = IEEE80211_HT_MPDU_DENSITY_8;
+ ht_cap.cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+ ht_cap.cap |= IEEE80211_HT_CAP_DSSSCCK40;
+ ht_cap.cap |= WLAN_HT_CAP_SM_PS_STATIC << IEEE80211_HT_CAP_SM_PS_SHIFT;
+
+ if (ar->ht_cap_info & WMI_HT_CAP_HT20_SGI)
+ ht_cap.cap |= IEEE80211_HT_CAP_SGI_20;
+
+ if (ar->ht_cap_info & WMI_HT_CAP_HT40_SGI)
+ ht_cap.cap |= IEEE80211_HT_CAP_SGI_40;
+
+ if (ar->ht_cap_info & WMI_HT_CAP_DYNAMIC_SMPS) {
+ u32 smps;
+
+ smps = WLAN_HT_CAP_SM_PS_DYNAMIC;
+ smps <<= IEEE80211_HT_CAP_SM_PS_SHIFT;
+
+ ht_cap.cap |= smps;
+ }
+
+ if (ar->ht_cap_info & WMI_HT_CAP_TX_STBC)
+ ht_cap.cap |= IEEE80211_HT_CAP_TX_STBC;
+
+ if (ar->ht_cap_info & WMI_HT_CAP_RX_STBC) {
+ u32 stbc;
+
+ stbc = ar->ht_cap_info;
+ stbc &= WMI_HT_CAP_RX_STBC;
+ stbc >>= WMI_HT_CAP_RX_STBC_MASK_SHIFT;
+ stbc <<= IEEE80211_HT_CAP_RX_STBC_SHIFT;
+ stbc &= IEEE80211_HT_CAP_RX_STBC;
+
+ ht_cap.cap |= stbc;
+ }
+
+ if (ar->ht_cap_info & WMI_HT_CAP_LDPC)
+ ht_cap.cap |= IEEE80211_HT_CAP_LDPC_CODING;
+
+ if (ar->ht_cap_info & WMI_HT_CAP_L_SIG_TXOP_PROT)
+ ht_cap.cap |= IEEE80211_HT_CAP_LSIG_TXOP_PROT;
+
+ /* max AMSDU is implicitly taken from vht_cap_info */
+ if (ar->vht_cap_info & WMI_VHT_CAP_MAX_MPDU_LEN_MASK)
+ ht_cap.cap |= IEEE80211_HT_CAP_MAX_AMSDU;
+
+ for (i = 0; i < ar->num_rf_chains; i++)
+ ht_cap.mcs.rx_mask[i] = 0xFF;
+
+ ht_cap.mcs.tx_params |= IEEE80211_HT_MCS_TX_DEFINED;
+
+ return ht_cap;
+}
+
+static void ath10k_get_arvif_iter(void *data, u8 *mac,
+ struct ieee80211_vif *vif)
+{
+ struct ath10k_vif_iter *arvif_iter = data;
+ struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+
+ if (arvif->vdev_id == arvif_iter->vdev_id)
+ arvif_iter->arvif = arvif;
+}
+
+struct ath10k_vif *ath10k_get_arvif(struct ath10k *ar, u32 vdev_id)
+{
+ struct ath10k_vif_iter arvif_iter;
+ u32 flags;
+
+ memset(&arvif_iter, 0, sizeof(struct ath10k_vif_iter));
+ arvif_iter.vdev_id = vdev_id;
+
+ flags = IEEE80211_IFACE_ITER_RESUME_ALL;
+ ieee80211_iterate_active_interfaces_atomic(ar->hw,
+ flags,
+ ath10k_get_arvif_iter,
+ &arvif_iter);
+ if (!arvif_iter.arvif) {
+ ath10k_warn(ar, "No VIF found for vdev %d\n", vdev_id);
+ return NULL;
+ }
+
+ return arvif_iter.arvif;
+}
+
+int ath10k_mac_register(struct ath10k *ar)
+{
+ static const u32 cipher_suites[] = {
+ WLAN_CIPHER_SUITE_WEP40,
+ WLAN_CIPHER_SUITE_WEP104,
+ WLAN_CIPHER_SUITE_TKIP,
+ WLAN_CIPHER_SUITE_CCMP,
+ WLAN_CIPHER_SUITE_AES_CMAC,
+ };
+ struct ieee80211_supported_band *band;
+ struct ieee80211_sta_vht_cap vht_cap;
+ struct ieee80211_sta_ht_cap ht_cap;
+ void *channels;
+ int ret;
+
+ SET_IEEE80211_PERM_ADDR(ar->hw, ar->mac_addr);
+
+ SET_IEEE80211_DEV(ar->hw, ar->dev);
+
+ ht_cap = ath10k_get_ht_cap(ar);
+ vht_cap = ath10k_create_vht_cap(ar);
+
+ if (ar->phy_capability & WHAL_WLAN_11G_CAPABILITY) {
+ channels = kmemdup(ath10k_2ghz_channels,
+ sizeof(ath10k_2ghz_channels),
+ GFP_KERNEL);
+ if (!channels) {
+ ret = -ENOMEM;
+ goto err_free;
+ }
+
+ band = &ar->mac.sbands[IEEE80211_BAND_2GHZ];
+ band->n_channels = ARRAY_SIZE(ath10k_2ghz_channels);
+ band->channels = channels;
+ band->n_bitrates = ath10k_g_rates_size;
+ band->bitrates = ath10k_g_rates;
+ band->ht_cap = ht_cap;
+
+ /* Enable the VHT support at 2.4 GHz */
+ band->vht_cap = vht_cap;
+
+ ar->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = band;
+ }
+
+ if (ar->phy_capability & WHAL_WLAN_11A_CAPABILITY) {
+ channels = kmemdup(ath10k_5ghz_channels,
+ sizeof(ath10k_5ghz_channels),
+ GFP_KERNEL);
+ if (!channels) {
+ ret = -ENOMEM;
+ goto err_free;
+ }
+
+ band = &ar->mac.sbands[IEEE80211_BAND_5GHZ];
+ band->n_channels = ARRAY_SIZE(ath10k_5ghz_channels);
+ band->channels = channels;
+ band->n_bitrates = ath10k_a_rates_size;
+ band->bitrates = ath10k_a_rates;
+ band->ht_cap = ht_cap;
+ band->vht_cap = vht_cap;
+ ar->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = band;
+ }
+
+ ar->hw->wiphy->interface_modes =
+ BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_AP);
+
+ ar->hw->wiphy->available_antennas_rx = ar->supp_rx_chainmask;
+ ar->hw->wiphy->available_antennas_tx = ar->supp_tx_chainmask;
+
+ if (!test_bit(ATH10K_FW_FEATURE_NO_P2P, ar->fw_features))
+ ar->hw->wiphy->interface_modes |=
+ BIT(NL80211_IFTYPE_P2P_DEVICE) |
+ BIT(NL80211_IFTYPE_P2P_CLIENT) |
+ BIT(NL80211_IFTYPE_P2P_GO);
+
+ ar->hw->flags = IEEE80211_HW_SIGNAL_DBM |
+ IEEE80211_HW_SUPPORTS_PS |
+ IEEE80211_HW_SUPPORTS_DYNAMIC_PS |
+ IEEE80211_HW_MFP_CAPABLE |
+ IEEE80211_HW_REPORTS_TX_ACK_STATUS |
+ IEEE80211_HW_HAS_RATE_CONTROL |
+ IEEE80211_HW_AP_LINK_PS |
+ IEEE80211_HW_SPECTRUM_MGMT |
+ IEEE80211_HW_SW_CRYPTO_CONTROL;
+
+ ar->hw->wiphy->features |= NL80211_FEATURE_STATIC_SMPS;
+
+ if (ar->ht_cap_info & WMI_HT_CAP_DYNAMIC_SMPS)
+ ar->hw->wiphy->features |= NL80211_FEATURE_DYNAMIC_SMPS;
+
+ if (ar->ht_cap_info & WMI_HT_CAP_ENABLED) {
+ ar->hw->flags |= IEEE80211_HW_AMPDU_AGGREGATION;
+ ar->hw->flags |= IEEE80211_HW_TX_AMPDU_SETUP_IN_HW;
+ }
+
+ ar->hw->wiphy->max_scan_ssids = WLAN_SCAN_PARAMS_MAX_SSID;
+ ar->hw->wiphy->max_scan_ie_len = WLAN_SCAN_PARAMS_MAX_IE_LEN;
+
+ ar->hw->vif_data_size = sizeof(struct ath10k_vif);
+ ar->hw->sta_data_size = sizeof(struct ath10k_sta);
+
+ ar->hw->max_listen_interval = ATH10K_MAX_HW_LISTEN_INTERVAL;
+
+ if (test_bit(WMI_SERVICE_BEACON_OFFLOAD, ar->wmi.svc_map)) {
+ ar->hw->wiphy->flags |= WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD;
+
+ /* Firmware delivers WPS/P2P Probe Requests frames to driver so
+ * that userspace (e.g. wpa_supplicant/hostapd) can generate
+ * correct Probe Responses. This is more of a hack advert..
+ */
+ ar->hw->wiphy->probe_resp_offload |=
+ NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS |
+ NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 |
+ NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P;
+ }
+
+ ar->hw->wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
+ ar->hw->wiphy->flags |= WIPHY_FLAG_HAS_CHANNEL_SWITCH;
+ ar->hw->wiphy->max_remain_on_channel_duration = 5000;
+
+ ar->hw->wiphy->flags |= WIPHY_FLAG_AP_UAPSD;
+ ar->hw->wiphy->features |= NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE;
+
+ /*
+ * on LL hardware queues are managed entirely by the FW
+ * so we only advertise to mac we can do the queues thing
+ */
+ ar->hw->queues = 4;
+
+ switch (ar->wmi.op_version) {
+ case ATH10K_FW_WMI_OP_VERSION_MAIN:
+ case ATH10K_FW_WMI_OP_VERSION_TLV:
+ ar->hw->wiphy->iface_combinations = ath10k_if_comb;
+ ar->hw->wiphy->n_iface_combinations =
+ ARRAY_SIZE(ath10k_if_comb);
+ ar->hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC);
+ break;
+ case ATH10K_FW_WMI_OP_VERSION_10_1:
+ case ATH10K_FW_WMI_OP_VERSION_10_2:
+ case ATH10K_FW_WMI_OP_VERSION_10_2_4:
+ ar->hw->wiphy->iface_combinations = ath10k_10x_if_comb;
+ ar->hw->wiphy->n_iface_combinations =
+ ARRAY_SIZE(ath10k_10x_if_comb);
+ break;
+ case ATH10K_FW_WMI_OP_VERSION_UNSET:
+ case ATH10K_FW_WMI_OP_VERSION_MAX:
+ WARN_ON(1);
+ ret = -EINVAL;
+ goto err_free;
+ }
+
+ ar->hw->netdev_features = NETIF_F_HW_CSUM;
+
+ if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED)) {
+ /* Init ath dfs pattern detector */
+ ar->ath_common.debug_mask = ATH_DBG_DFS;
+ ar->dfs_detector = dfs_pattern_detector_init(&ar->ath_common,
+ NL80211_DFS_UNSET);
+
+ if (!ar->dfs_detector)
+ ath10k_warn(ar, "failed to initialise DFS pattern detector\n");
+ }
+
+ ret = ath_regd_init(&ar->ath_common.regulatory, ar->hw->wiphy,
+ ath10k_reg_notifier);
+ if (ret) {
+ ath10k_err(ar, "failed to initialise regulatory: %i\n", ret);
+ goto err_free;
+ }
+
+ ar->hw->wiphy->cipher_suites = cipher_suites;
+ ar->hw->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
+
+ ret = ieee80211_register_hw(ar->hw);
+ if (ret) {
+ ath10k_err(ar, "failed to register ieee80211: %d\n", ret);
+ goto err_free;
+ }
+
+ if (!ath_is_world_regd(&ar->ath_common.regulatory)) {
+ ret = regulatory_hint(ar->hw->wiphy,
+ ar->ath_common.regulatory.alpha2);
+ if (ret)
+ goto err_unregister;
+ }
+
+ return 0;
+
+err_unregister:
+ ieee80211_unregister_hw(ar->hw);
+err_free:
+ kfree(ar->mac.sbands[IEEE80211_BAND_2GHZ].channels);
+ kfree(ar->mac.sbands[IEEE80211_BAND_5GHZ].channels);
+
+ return ret;
+}
+
+void ath10k_mac_unregister(struct ath10k *ar)
+{
+ ieee80211_unregister_hw(ar->hw);
+
+ if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector)
+ ar->dfs_detector->exit(ar->dfs_detector);
+
+ kfree(ar->mac.sbands[IEEE80211_BAND_2GHZ].channels);
+ kfree(ar->mac.sbands[IEEE80211_BAND_5GHZ].channels);
+
+ SET_IEEE80211_DEV(ar->hw, NULL);
+}
Code Review / kvmfornfv.git / blobdiff