--- /dev/null
+/*
+ * Intel Wireless WiMAX Connection 2400m
+ * USB-specific i2400m driver definitions
+ *
+ *
+ * Copyright (C) 2007-2008 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * Intel Corporation <linux-wimax@intel.com>
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ * Yanir Lubetkin <yanirx.lubetkin@intel.com>
+ * - Initial implementation
+ *
+ *
+ * This driver implements the bus-specific part of the i2400m for
+ * USB. Check i2400m.h for a generic driver description.
+ *
+ * ARCHITECTURE
+ *
+ * This driver listens to notifications sent from the notification
+ * endpoint (in usb-notif.c); when data is ready to read, the code in
+ * there schedules a read from the device (usb-rx.c) and then passes
+ * the data to the generic RX code (rx.c).
+ *
+ * When the generic driver needs to send data (network or control), it
+ * queues up in the TX FIFO (tx.c) and that will notify the driver
+ * through the i2400m->bus_tx_kick() callback
+ * (usb-tx.c:i2400mu_bus_tx_kick) which will send the items in the
+ * FIFO queue.
+ *
+ * This driver, as well, implements the USB-specific ops for the generic
+ * driver to be able to setup/teardown communication with the device
+ * [i2400m_bus_dev_start() and i2400m_bus_dev_stop()], reseting the
+ * device [i2400m_bus_reset()] and performing firmware upload
+ * [i2400m_bus_bm_cmd() and i2400_bus_bm_wait_for_ack()].
+ */
+
+#ifndef __I2400M_USB_H__
+#define __I2400M_USB_H__
+
+#include "i2400m.h"
+#include <linux/kthread.h>
+
+
+/*
+ * Error Density Count: cheapo error density (over time) counter
+ *
+ * Originally by Reinette Chatre <reinette.chatre@intel.com>
+ *
+ * Embed an 'struct edc' somewhere. Each time there is a soft or
+ * retryable error, call edc_inc() and check if the error top
+ * watermark has been reached.
+ */
+enum {
+ EDC_MAX_ERRORS = 10,
+ EDC_ERROR_TIMEFRAME = HZ,
+};
+
+/* error density counter */
+struct edc {
+ unsigned long timestart;
+ u16 errorcount;
+};
+
+struct i2400m_endpoint_cfg {
+ unsigned char bulk_out;
+ unsigned char notification;
+ unsigned char reset_cold;
+ unsigned char bulk_in;
+};
+
+static inline void edc_init(struct edc *edc)
+{
+ edc->timestart = jiffies;
+}
+
+/**
+ * edc_inc - report a soft error and check if we are over the watermark
+ *
+ * @edc: pointer to error density counter.
+ * @max_err: maximum number of errors we can accept over the timeframe
+ * @timeframe: length of the timeframe (in jiffies).
+ *
+ * Returns: !0 1 if maximum acceptable errors per timeframe has been
+ * exceeded. 0 otherwise.
+ *
+ * This is way to determine if the number of acceptable errors per time
+ * period has been exceeded. It is not accurate as there are cases in which
+ * this scheme will not work, for example if there are periodic occurrences
+ * of errors that straddle updates to the start time. This scheme is
+ * sufficient for our usage.
+ *
+ * To use, embed a 'struct edc' somewhere, initialize it with
+ * edc_init() and when an error hits:
+ *
+ * if (do_something_fails_with_a_soft_error) {
+ * if (edc_inc(&my->edc, MAX_ERRORS, MAX_TIMEFRAME))
+ * Ops, hard error, do something about it
+ * else
+ * Retry or ignore, depending on whatever
+ * }
+ */
+static inline int edc_inc(struct edc *edc, u16 max_err, u16 timeframe)
+{
+ unsigned long now;
+
+ now = jiffies;
+ if (now - edc->timestart > timeframe) {
+ edc->errorcount = 1;
+ edc->timestart = now;
+ } else if (++edc->errorcount > max_err) {
+ edc->errorcount = 0;
+ edc->timestart = now;
+ return 1;
+ }
+ return 0;
+}
+
+/* Host-Device interface for USB */
+enum {
+ I2400M_USB_BOOT_RETRIES = 3,
+ I2400MU_MAX_NOTIFICATION_LEN = 256,
+ I2400MU_BLK_SIZE = 16,
+ I2400MU_PL_SIZE_MAX = 0x3EFF,
+
+ /* Device IDs */
+ USB_DEVICE_ID_I6050 = 0x0186,
+ USB_DEVICE_ID_I6050_2 = 0x0188,
+ USB_DEVICE_ID_I6150 = 0x07d6,
+ USB_DEVICE_ID_I6150_2 = 0x07d7,
+ USB_DEVICE_ID_I6150_3 = 0x07d9,
+ USB_DEVICE_ID_I6250 = 0x0187,
+};
+
+
+/**
+ * struct i2400mu - descriptor for a USB connected i2400m
+ *
+ * @i2400m: bus-generic i2400m implementation; has to be first (see
+ * it's documentation in i2400m.h).
+ *
+ * @usb_dev: pointer to our USB device
+ *
+ * @usb_iface: pointer to our USB interface
+ *
+ * @urb_edc: error density counter; used to keep a density-on-time tab
+ * on how many soft (retryable or ignorable) errors we get. If we
+ * go over the threshold, we consider the bus transport is failing
+ * too much and reset.
+ *
+ * @notif_urb: URB for receiving notifications from the device.
+ *
+ * @tx_kthread: thread we use for data TX. We use a thread because in
+ * order to do deep power saving and put the device to sleep, we
+ * need to call usb_autopm_*() [blocking functions].
+ *
+ * @tx_wq: waitqueue for the TX kthread to sleep when there is no data
+ * to be sent; when more data is available, it is woken up by
+ * i2400mu_bus_tx_kick().
+ *
+ * @rx_kthread: thread we use for data RX. We use a thread because in
+ * order to do deep power saving and put the device to sleep, we
+ * need to call usb_autopm_*() [blocking functions].
+ *
+ * @rx_wq: waitqueue for the RX kthread to sleep when there is no data
+ * to receive. When data is available, it is woken up by
+ * usb-notif.c:i2400mu_notification_grok().
+ *
+ * @rx_pending_count: number of rx-data-ready notifications that were
+ * still not handled by the RX kthread.
+ *
+ * @rx_size: current RX buffer size that is being used.
+ *
+ * @rx_size_acc: accumulator of the sizes of the previous read
+ * transactions.
+ *
+ * @rx_size_cnt: number of read transactions accumulated in
+ * @rx_size_acc.
+ *
+ * @do_autopm: disable(0)/enable(>0) calling the
+ * usb_autopm_get/put_interface() barriers when executing
+ * commands. See doc in i2400mu_suspend() for more information.
+ *
+ * @rx_size_auto_shrink: if true, the rx_size is shrunk
+ * automatically based on the average size of the received
+ * transactions. This allows the receive code to allocate smaller
+ * chunks of memory and thus reduce pressure on the memory
+ * allocator by not wasting so much space. By default it is
+ * enabled.
+ *
+ * @debugfs_dentry: hookup for debugfs files.
+ * These have to be in a separate directory, a child of
+ * (wimax_dev->debugfs_dentry) so they can be removed when the
+ * module unloads, as we don't keep each dentry.
+ */
+struct i2400mu {
+ struct i2400m i2400m; /* FIRST! See doc */
+
+ struct usb_device *usb_dev;
+ struct usb_interface *usb_iface;
+ struct edc urb_edc; /* Error density counter */
+ struct i2400m_endpoint_cfg endpoint_cfg;
+
+ struct urb *notif_urb;
+ struct task_struct *tx_kthread;
+ wait_queue_head_t tx_wq;
+
+ struct task_struct *rx_kthread;
+ wait_queue_head_t rx_wq;
+ atomic_t rx_pending_count;
+ size_t rx_size, rx_size_acc, rx_size_cnt;
+ atomic_t do_autopm;
+ u8 rx_size_auto_shrink;
+
+ struct dentry *debugfs_dentry;
+ unsigned i6050:1; /* 1 if this is a 6050 based SKU */
+};
+
+
+static inline
+void i2400mu_init(struct i2400mu *i2400mu)
+{
+ i2400m_init(&i2400mu->i2400m);
+ edc_init(&i2400mu->urb_edc);
+ init_waitqueue_head(&i2400mu->tx_wq);
+ atomic_set(&i2400mu->rx_pending_count, 0);
+ init_waitqueue_head(&i2400mu->rx_wq);
+ i2400mu->rx_size = PAGE_SIZE - sizeof(struct skb_shared_info);
+ atomic_set(&i2400mu->do_autopm, 1);
+ i2400mu->rx_size_auto_shrink = 1;
+}
+
+int i2400mu_notification_setup(struct i2400mu *);
+void i2400mu_notification_release(struct i2400mu *);
+
+int i2400mu_rx_setup(struct i2400mu *);
+void i2400mu_rx_release(struct i2400mu *);
+void i2400mu_rx_kick(struct i2400mu *);
+
+int i2400mu_tx_setup(struct i2400mu *);
+void i2400mu_tx_release(struct i2400mu *);
+void i2400mu_bus_tx_kick(struct i2400m *);
+
+ssize_t i2400mu_bus_bm_cmd_send(struct i2400m *,
+ const struct i2400m_bootrom_header *, size_t,
+ int);
+ssize_t i2400mu_bus_bm_wait_for_ack(struct i2400m *,
+ struct i2400m_bootrom_header *, size_t);
+#endif /* #ifndef __I2400M_USB_H__ */
Code Review / kvmfornfv.git / blobdiff