--- /dev/null
+/*
+ * drivers/net/phy/marvell.c
+ *
+ * Driver for Marvell PHYs
+ *
+ * Author: Andy Fleming
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc.
+ *
+ * Copyright (c) 2013 Michael Stapelberg <michael@stapelberg.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+#include <linux/marvell_phy.h>
+#include <linux/of.h>
+
+#include <linux/io.h>
+#include <asm/irq.h>
+#include <linux/uaccess.h>
+
+#define MII_MARVELL_PHY_PAGE 22
+
+#define MII_M1011_IEVENT 0x13
+#define MII_M1011_IEVENT_CLEAR 0x0000
+
+#define MII_M1011_IMASK 0x12
+#define MII_M1011_IMASK_INIT 0x6400
+#define MII_M1011_IMASK_CLEAR 0x0000
+
+#define MII_M1011_PHY_SCR 0x10
+#define MII_M1011_PHY_SCR_AUTO_CROSS 0x0060
+
+#define MII_M1145_PHY_EXT_SR 0x1b
+#define MII_M1145_PHY_EXT_CR 0x14
+#define MII_M1145_RGMII_RX_DELAY 0x0080
+#define MII_M1145_RGMII_TX_DELAY 0x0002
+#define MII_M1145_HWCFG_MODE_SGMII_NO_CLK 0x4
+#define MII_M1145_HWCFG_MODE_MASK 0xf
+#define MII_M1145_HWCFG_FIBER_COPPER_AUTO 0x8000
+
+#define MII_M1145_HWCFG_MODE_SGMII_NO_CLK 0x4
+#define MII_M1145_HWCFG_MODE_MASK 0xf
+#define MII_M1145_HWCFG_FIBER_COPPER_AUTO 0x8000
+
+#define MII_M1111_PHY_LED_CONTROL 0x18
+#define MII_M1111_PHY_LED_DIRECT 0x4100
+#define MII_M1111_PHY_LED_COMBINE 0x411c
+#define MII_M1111_PHY_EXT_CR 0x14
+#define MII_M1111_RX_DELAY 0x80
+#define MII_M1111_TX_DELAY 0x2
+#define MII_M1111_PHY_EXT_SR 0x1b
+
+#define MII_M1111_HWCFG_MODE_MASK 0xf
+#define MII_M1111_HWCFG_MODE_COPPER_RGMII 0xb
+#define MII_M1111_HWCFG_MODE_FIBER_RGMII 0x3
+#define MII_M1111_HWCFG_MODE_SGMII_NO_CLK 0x4
+#define MII_M1111_HWCFG_MODE_COPPER_RTBI 0x9
+#define MII_M1111_HWCFG_FIBER_COPPER_AUTO 0x8000
+#define MII_M1111_HWCFG_FIBER_COPPER_RES 0x2000
+
+#define MII_M1111_COPPER 0
+#define MII_M1111_FIBER 1
+
+#define MII_88E1121_PHY_MSCR_PAGE 2
+#define MII_88E1121_PHY_MSCR_REG 21
+#define MII_88E1121_PHY_MSCR_RX_DELAY BIT(5)
+#define MII_88E1121_PHY_MSCR_TX_DELAY BIT(4)
+#define MII_88E1121_PHY_MSCR_DELAY_MASK (~(0x3 << 4))
+
+#define MII_88E1318S_PHY_MSCR1_REG 16
+#define MII_88E1318S_PHY_MSCR1_PAD_ODD BIT(6)
+
+/* Copper Specific Interrupt Enable Register */
+#define MII_88E1318S_PHY_CSIER 0x12
+/* WOL Event Interrupt Enable */
+#define MII_88E1318S_PHY_CSIER_WOL_EIE BIT(7)
+
+/* LED Timer Control Register */
+#define MII_88E1318S_PHY_LED_PAGE 0x03
+#define MII_88E1318S_PHY_LED_TCR 0x12
+#define MII_88E1318S_PHY_LED_TCR_FORCE_INT BIT(15)
+#define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE BIT(7)
+#define MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW BIT(11)
+
+/* Magic Packet MAC address registers */
+#define MII_88E1318S_PHY_MAGIC_PACKET_WORD2 0x17
+#define MII_88E1318S_PHY_MAGIC_PACKET_WORD1 0x18
+#define MII_88E1318S_PHY_MAGIC_PACKET_WORD0 0x19
+
+#define MII_88E1318S_PHY_WOL_PAGE 0x11
+#define MII_88E1318S_PHY_WOL_CTRL 0x10
+#define MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS BIT(12)
+#define MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE BIT(14)
+
+#define MII_88E1121_PHY_LED_CTRL 16
+#define MII_88E1121_PHY_LED_PAGE 3
+#define MII_88E1121_PHY_LED_DEF 0x0030
+
+#define MII_M1011_PHY_STATUS 0x11
+#define MII_M1011_PHY_STATUS_1000 0x8000
+#define MII_M1011_PHY_STATUS_100 0x4000
+#define MII_M1011_PHY_STATUS_SPD_MASK 0xc000
+#define MII_M1011_PHY_STATUS_FULLDUPLEX 0x2000
+#define MII_M1011_PHY_STATUS_RESOLVED 0x0800
+#define MII_M1011_PHY_STATUS_LINK 0x0400
+
+#define MII_M1116R_CONTROL_REG_MAC 21
+
+#define MII_88E3016_PHY_SPEC_CTRL 0x10
+#define MII_88E3016_DISABLE_SCRAMBLER 0x0200
+#define MII_88E3016_AUTO_MDIX_CROSSOVER 0x0030
+
+MODULE_DESCRIPTION("Marvell PHY driver");
+MODULE_AUTHOR("Andy Fleming");
+MODULE_LICENSE("GPL");
+
+static int marvell_ack_interrupt(struct phy_device *phydev)
+{
+ int err;
+
+ /* Clear the interrupts by reading the reg */
+ err = phy_read(phydev, MII_M1011_IEVENT);
+
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int marvell_config_intr(struct phy_device *phydev)
+{
+ int err;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ err = phy_write(phydev, MII_M1011_IMASK, MII_M1011_IMASK_INIT);
+ else
+ err = phy_write(phydev, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR);
+
+ return err;
+}
+
+static int marvell_config_aneg(struct phy_device *phydev)
+{
+ int err;
+
+ /* The Marvell PHY has an errata which requires
+ * that certain registers get written in order
+ * to restart autonegotiation */
+ err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1d, 0x1f);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1e, 0x200c);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1d, 0x5);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1e, 0);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1e, 0x100);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, MII_M1011_PHY_SCR,
+ MII_M1011_PHY_SCR_AUTO_CROSS);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, MII_M1111_PHY_LED_CONTROL,
+ MII_M1111_PHY_LED_DIRECT);
+ if (err < 0)
+ return err;
+
+ err = genphy_config_aneg(phydev);
+ if (err < 0)
+ return err;
+
+ if (phydev->autoneg != AUTONEG_ENABLE) {
+ int bmcr;
+
+ /*
+ * A write to speed/duplex bits (that is performed by
+ * genphy_config_aneg() call above) must be followed by
+ * a software reset. Otherwise, the write has no effect.
+ */
+ bmcr = phy_read(phydev, MII_BMCR);
+ if (bmcr < 0)
+ return bmcr;
+
+ err = phy_write(phydev, MII_BMCR, bmcr | BMCR_RESET);
+ if (err < 0)
+ return err;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_OF_MDIO
+/*
+ * Set and/or override some configuration registers based on the
+ * marvell,reg-init property stored in the of_node for the phydev.
+ *
+ * marvell,reg-init = <reg-page reg mask value>,...;
+ *
+ * There may be one or more sets of <reg-page reg mask value>:
+ *
+ * reg-page: which register bank to use.
+ * reg: the register.
+ * mask: if non-zero, ANDed with existing register value.
+ * value: ORed with the masked value and written to the regiser.
+ *
+ */
+static int marvell_of_reg_init(struct phy_device *phydev)
+{
+ const __be32 *paddr;
+ int len, i, saved_page, current_page, page_changed, ret;
+
+ if (!phydev->dev.of_node)
+ return 0;
+
+ paddr = of_get_property(phydev->dev.of_node, "marvell,reg-init", &len);
+ if (!paddr || len < (4 * sizeof(*paddr)))
+ return 0;
+
+ saved_page = phy_read(phydev, MII_MARVELL_PHY_PAGE);
+ if (saved_page < 0)
+ return saved_page;
+ page_changed = 0;
+ current_page = saved_page;
+
+ ret = 0;
+ len /= sizeof(*paddr);
+ for (i = 0; i < len - 3; i += 4) {
+ u16 reg_page = be32_to_cpup(paddr + i);
+ u16 reg = be32_to_cpup(paddr + i + 1);
+ u16 mask = be32_to_cpup(paddr + i + 2);
+ u16 val_bits = be32_to_cpup(paddr + i + 3);
+ int val;
+
+ if (reg_page != current_page) {
+ current_page = reg_page;
+ page_changed = 1;
+ ret = phy_write(phydev, MII_MARVELL_PHY_PAGE, reg_page);
+ if (ret < 0)
+ goto err;
+ }
+
+ val = 0;
+ if (mask) {
+ val = phy_read(phydev, reg);
+ if (val < 0) {
+ ret = val;
+ goto err;
+ }
+ val &= mask;
+ }
+ val |= val_bits;
+
+ ret = phy_write(phydev, reg, val);
+ if (ret < 0)
+ goto err;
+
+ }
+err:
+ if (page_changed) {
+ i = phy_write(phydev, MII_MARVELL_PHY_PAGE, saved_page);
+ if (ret == 0)
+ ret = i;
+ }
+ return ret;
+}
+#else
+static int marvell_of_reg_init(struct phy_device *phydev)
+{
+ return 0;
+}
+#endif /* CONFIG_OF_MDIO */
+
+static int m88e1121_config_aneg(struct phy_device *phydev)
+{
+ int err, oldpage, mscr;
+
+ oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE);
+
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE,
+ MII_88E1121_PHY_MSCR_PAGE);
+ if (err < 0)
+ return err;
+
+ if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) ||
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) ||
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) ||
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)) {
+
+ mscr = phy_read(phydev, MII_88E1121_PHY_MSCR_REG) &
+ MII_88E1121_PHY_MSCR_DELAY_MASK;
+
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
+ mscr |= (MII_88E1121_PHY_MSCR_RX_DELAY |
+ MII_88E1121_PHY_MSCR_TX_DELAY);
+ else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
+ mscr |= MII_88E1121_PHY_MSCR_RX_DELAY;
+ else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
+ mscr |= MII_88E1121_PHY_MSCR_TX_DELAY;
+
+ err = phy_write(phydev, MII_88E1121_PHY_MSCR_REG, mscr);
+ if (err < 0)
+ return err;
+ }
+
+ phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage);
+
+ err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, MII_M1011_PHY_SCR,
+ MII_M1011_PHY_SCR_AUTO_CROSS);
+ if (err < 0)
+ return err;
+
+ oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE);
+
+ phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_88E1121_PHY_LED_PAGE);
+ phy_write(phydev, MII_88E1121_PHY_LED_CTRL, MII_88E1121_PHY_LED_DEF);
+ phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage);
+
+ err = genphy_config_aneg(phydev);
+
+ return err;
+}
+
+static int m88e1318_config_aneg(struct phy_device *phydev)
+{
+ int err, oldpage, mscr;
+
+ oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE);
+
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE,
+ MII_88E1121_PHY_MSCR_PAGE);
+ if (err < 0)
+ return err;
+
+ mscr = phy_read(phydev, MII_88E1318S_PHY_MSCR1_REG);
+ mscr |= MII_88E1318S_PHY_MSCR1_PAD_ODD;
+
+ err = phy_write(phydev, MII_88E1318S_PHY_MSCR1_REG, mscr);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage);
+ if (err < 0)
+ return err;
+
+ return m88e1121_config_aneg(phydev);
+}
+
+static int m88e1510_config_aneg(struct phy_device *phydev)
+{
+ int err;
+
+ err = m88e1318_config_aneg(phydev);
+ if (err < 0)
+ return err;
+
+ return marvell_of_reg_init(phydev);
+}
+
+static int m88e1116r_config_init(struct phy_device *phydev)
+{
+ int temp;
+ int err;
+
+ temp = phy_read(phydev, MII_BMCR);
+ temp |= BMCR_RESET;
+ err = phy_write(phydev, MII_BMCR, temp);
+ if (err < 0)
+ return err;
+
+ mdelay(500);
+
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0);
+ if (err < 0)
+ return err;
+
+ temp = phy_read(phydev, MII_M1011_PHY_SCR);
+ temp |= (7 << 12); /* max number of gigabit attempts */
+ temp |= (1 << 11); /* enable downshift */
+ temp |= MII_M1011_PHY_SCR_AUTO_CROSS;
+ err = phy_write(phydev, MII_M1011_PHY_SCR, temp);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 2);
+ if (err < 0)
+ return err;
+ temp = phy_read(phydev, MII_M1116R_CONTROL_REG_MAC);
+ temp |= (1 << 5);
+ temp |= (1 << 4);
+ err = phy_write(phydev, MII_M1116R_CONTROL_REG_MAC, temp);
+ if (err < 0)
+ return err;
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0);
+ if (err < 0)
+ return err;
+
+ temp = phy_read(phydev, MII_BMCR);
+ temp |= BMCR_RESET;
+ err = phy_write(phydev, MII_BMCR, temp);
+ if (err < 0)
+ return err;
+
+ mdelay(500);
+
+ return 0;
+}
+
+static int m88e3016_config_init(struct phy_device *phydev)
+{
+ int reg;
+
+ /* Enable Scrambler and Auto-Crossover */
+ reg = phy_read(phydev, MII_88E3016_PHY_SPEC_CTRL);
+ if (reg < 0)
+ return reg;
+
+ reg &= ~MII_88E3016_DISABLE_SCRAMBLER;
+ reg |= MII_88E3016_AUTO_MDIX_CROSSOVER;
+
+ reg = phy_write(phydev, MII_88E3016_PHY_SPEC_CTRL, reg);
+ if (reg < 0)
+ return reg;
+
+ return 0;
+}
+
+static int m88e1111_config_init(struct phy_device *phydev)
+{
+ int err;
+ int temp;
+
+ if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) ||
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) ||
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) ||
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)) {
+
+ temp = phy_read(phydev, MII_M1111_PHY_EXT_CR);
+ if (temp < 0)
+ return temp;
+
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
+ temp |= (MII_M1111_RX_DELAY | MII_M1111_TX_DELAY);
+ } else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
+ temp &= ~MII_M1111_TX_DELAY;
+ temp |= MII_M1111_RX_DELAY;
+ } else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
+ temp &= ~MII_M1111_RX_DELAY;
+ temp |= MII_M1111_TX_DELAY;
+ }
+
+ err = phy_write(phydev, MII_M1111_PHY_EXT_CR, temp);
+ if (err < 0)
+ return err;
+
+ temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
+ if (temp < 0)
+ return temp;
+
+ temp &= ~(MII_M1111_HWCFG_MODE_MASK);
+
+ if (temp & MII_M1111_HWCFG_FIBER_COPPER_RES)
+ temp |= MII_M1111_HWCFG_MODE_FIBER_RGMII;
+ else
+ temp |= MII_M1111_HWCFG_MODE_COPPER_RGMII;
+
+ err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
+ if (err < 0)
+ return err;
+ }
+
+ if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
+ temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
+ if (temp < 0)
+ return temp;
+
+ temp &= ~(MII_M1111_HWCFG_MODE_MASK);
+ temp |= MII_M1111_HWCFG_MODE_SGMII_NO_CLK;
+ temp |= MII_M1111_HWCFG_FIBER_COPPER_AUTO;
+
+ err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
+ if (err < 0)
+ return err;
+ }
+
+ if (phydev->interface == PHY_INTERFACE_MODE_RTBI) {
+ temp = phy_read(phydev, MII_M1111_PHY_EXT_CR);
+ if (temp < 0)
+ return temp;
+ temp |= (MII_M1111_RX_DELAY | MII_M1111_TX_DELAY);
+ err = phy_write(phydev, MII_M1111_PHY_EXT_CR, temp);
+ if (err < 0)
+ return err;
+
+ temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
+ if (temp < 0)
+ return temp;
+ temp &= ~(MII_M1111_HWCFG_MODE_MASK | MII_M1111_HWCFG_FIBER_COPPER_RES);
+ temp |= 0x7 | MII_M1111_HWCFG_FIBER_COPPER_AUTO;
+ err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
+ if (err < 0)
+ return err;
+
+ /* soft reset */
+ err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+ if (err < 0)
+ return err;
+ do
+ temp = phy_read(phydev, MII_BMCR);
+ while (temp & BMCR_RESET);
+
+ temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
+ if (temp < 0)
+ return temp;
+ temp &= ~(MII_M1111_HWCFG_MODE_MASK | MII_M1111_HWCFG_FIBER_COPPER_RES);
+ temp |= MII_M1111_HWCFG_MODE_COPPER_RTBI | MII_M1111_HWCFG_FIBER_COPPER_AUTO;
+ err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
+ if (err < 0)
+ return err;
+ }
+
+ err = marvell_of_reg_init(phydev);
+ if (err < 0)
+ return err;
+
+ return phy_write(phydev, MII_BMCR, BMCR_RESET);
+}
+
+static int m88e1118_config_aneg(struct phy_device *phydev)
+{
+ int err;
+
+ err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, MII_M1011_PHY_SCR,
+ MII_M1011_PHY_SCR_AUTO_CROSS);
+ if (err < 0)
+ return err;
+
+ err = genphy_config_aneg(phydev);
+ return 0;
+}
+
+static int m88e1118_config_init(struct phy_device *phydev)
+{
+ int err;
+
+ /* Change address */
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0002);
+ if (err < 0)
+ return err;
+
+ /* Enable 1000 Mbit */
+ err = phy_write(phydev, 0x15, 0x1070);
+ if (err < 0)
+ return err;
+
+ /* Change address */
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0003);
+ if (err < 0)
+ return err;
+
+ /* Adjust LED Control */
+ if (phydev->dev_flags & MARVELL_PHY_M1118_DNS323_LEDS)
+ err = phy_write(phydev, 0x10, 0x1100);
+ else
+ err = phy_write(phydev, 0x10, 0x021e);
+ if (err < 0)
+ return err;
+
+ err = marvell_of_reg_init(phydev);
+ if (err < 0)
+ return err;
+
+ /* Reset address */
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0);
+ if (err < 0)
+ return err;
+
+ return phy_write(phydev, MII_BMCR, BMCR_RESET);
+}
+
+static int m88e1149_config_init(struct phy_device *phydev)
+{
+ int err;
+
+ /* Change address */
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0002);
+ if (err < 0)
+ return err;
+
+ /* Enable 1000 Mbit */
+ err = phy_write(phydev, 0x15, 0x1048);
+ if (err < 0)
+ return err;
+
+ err = marvell_of_reg_init(phydev);
+ if (err < 0)
+ return err;
+
+ /* Reset address */
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0);
+ if (err < 0)
+ return err;
+
+ return phy_write(phydev, MII_BMCR, BMCR_RESET);
+}
+
+static int m88e1145_config_init(struct phy_device *phydev)
+{
+ int err;
+ int temp;
+
+ /* Take care of errata E0 & E1 */
+ err = phy_write(phydev, 0x1d, 0x001b);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1e, 0x418f);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1d, 0x0016);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1e, 0xa2da);
+ if (err < 0)
+ return err;
+
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
+ int temp = phy_read(phydev, MII_M1145_PHY_EXT_CR);
+ if (temp < 0)
+ return temp;
+
+ temp |= (MII_M1145_RGMII_RX_DELAY | MII_M1145_RGMII_TX_DELAY);
+
+ err = phy_write(phydev, MII_M1145_PHY_EXT_CR, temp);
+ if (err < 0)
+ return err;
+
+ if (phydev->dev_flags & MARVELL_PHY_M1145_FLAGS_RESISTANCE) {
+ err = phy_write(phydev, 0x1d, 0x0012);
+ if (err < 0)
+ return err;
+
+ temp = phy_read(phydev, 0x1e);
+ if (temp < 0)
+ return temp;
+
+ temp &= 0xf03f;
+ temp |= 2 << 9; /* 36 ohm */
+ temp |= 2 << 6; /* 39 ohm */
+
+ err = phy_write(phydev, 0x1e, temp);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1d, 0x3);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1e, 0x8000);
+ if (err < 0)
+ return err;
+ }
+ }
+
+ if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
+ temp = phy_read(phydev, MII_M1145_PHY_EXT_SR);
+ if (temp < 0)
+ return temp;
+
+ temp &= ~MII_M1145_HWCFG_MODE_MASK;
+ temp |= MII_M1145_HWCFG_MODE_SGMII_NO_CLK;
+ temp |= MII_M1145_HWCFG_FIBER_COPPER_AUTO;
+
+ err = phy_write(phydev, MII_M1145_PHY_EXT_SR, temp);
+ if (err < 0)
+ return err;
+ }
+
+ err = marvell_of_reg_init(phydev);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+/* marvell_read_status
+ *
+ * Generic status code does not detect Fiber correctly!
+ * Description:
+ * Check the link, then figure out the current state
+ * by comparing what we advertise with what the link partner
+ * advertises. Start by checking the gigabit possibilities,
+ * then move on to 10/100.
+ */
+static int marvell_read_status(struct phy_device *phydev)
+{
+ int adv;
+ int err;
+ int lpa;
+ int status = 0;
+
+ /* Update the link, but return if there
+ * was an error */
+ err = genphy_update_link(phydev);
+ if (err)
+ return err;
+
+ if (AUTONEG_ENABLE == phydev->autoneg) {
+ status = phy_read(phydev, MII_M1011_PHY_STATUS);
+ if (status < 0)
+ return status;
+
+ lpa = phy_read(phydev, MII_LPA);
+ if (lpa < 0)
+ return lpa;
+
+ adv = phy_read(phydev, MII_ADVERTISE);
+ if (adv < 0)
+ return adv;
+
+ lpa &= adv;
+
+ if (status & MII_M1011_PHY_STATUS_FULLDUPLEX)
+ phydev->duplex = DUPLEX_FULL;
+ else
+ phydev->duplex = DUPLEX_HALF;
+
+ status = status & MII_M1011_PHY_STATUS_SPD_MASK;
+ phydev->pause = phydev->asym_pause = 0;
+
+ switch (status) {
+ case MII_M1011_PHY_STATUS_1000:
+ phydev->speed = SPEED_1000;
+ break;
+
+ case MII_M1011_PHY_STATUS_100:
+ phydev->speed = SPEED_100;
+ break;
+
+ default:
+ phydev->speed = SPEED_10;
+ break;
+ }
+
+ if (phydev->duplex == DUPLEX_FULL) {
+ phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
+ phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
+ }
+ } else {
+ int bmcr = phy_read(phydev, MII_BMCR);
+
+ if (bmcr < 0)
+ return bmcr;
+
+ if (bmcr & BMCR_FULLDPLX)
+ phydev->duplex = DUPLEX_FULL;
+ else
+ phydev->duplex = DUPLEX_HALF;
+
+ if (bmcr & BMCR_SPEED1000)
+ phydev->speed = SPEED_1000;
+ else if (bmcr & BMCR_SPEED100)
+ phydev->speed = SPEED_100;
+ else
+ phydev->speed = SPEED_10;
+
+ phydev->pause = phydev->asym_pause = 0;
+ }
+
+ return 0;
+}
+
+static int marvell_aneg_done(struct phy_device *phydev)
+{
+ int retval = phy_read(phydev, MII_M1011_PHY_STATUS);
+ return (retval < 0) ? retval : (retval & MII_M1011_PHY_STATUS_RESOLVED);
+}
+
+static int m88e1121_did_interrupt(struct phy_device *phydev)
+{
+ int imask;
+
+ imask = phy_read(phydev, MII_M1011_IEVENT);
+
+ if (imask & MII_M1011_IMASK_INIT)
+ return 1;
+
+ return 0;
+}
+
+static void m88e1318_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
+{
+ wol->supported = WAKE_MAGIC;
+ wol->wolopts = 0;
+
+ if (phy_write(phydev, MII_MARVELL_PHY_PAGE,
+ MII_88E1318S_PHY_WOL_PAGE) < 0)
+ return;
+
+ if (phy_read(phydev, MII_88E1318S_PHY_WOL_CTRL) &
+ MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE)
+ wol->wolopts |= WAKE_MAGIC;
+
+ if (phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x00) < 0)
+ return;
+}
+
+static int m88e1318_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
+{
+ int err, oldpage, temp;
+
+ oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE);
+
+ if (wol->wolopts & WAKE_MAGIC) {
+ /* Explicitly switch to page 0x00, just to be sure */
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x00);
+ if (err < 0)
+ return err;
+
+ /* Enable the WOL interrupt */
+ temp = phy_read(phydev, MII_88E1318S_PHY_CSIER);
+ temp |= MII_88E1318S_PHY_CSIER_WOL_EIE;
+ err = phy_write(phydev, MII_88E1318S_PHY_CSIER, temp);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE,
+ MII_88E1318S_PHY_LED_PAGE);
+ if (err < 0)
+ return err;
+
+ /* Setup LED[2] as interrupt pin (active low) */
+ temp = phy_read(phydev, MII_88E1318S_PHY_LED_TCR);
+ temp &= ~MII_88E1318S_PHY_LED_TCR_FORCE_INT;
+ temp |= MII_88E1318S_PHY_LED_TCR_INTn_ENABLE;
+ temp |= MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW;
+ err = phy_write(phydev, MII_88E1318S_PHY_LED_TCR, temp);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE,
+ MII_88E1318S_PHY_WOL_PAGE);
+ if (err < 0)
+ return err;
+
+ /* Store the device address for the magic packet */
+ err = phy_write(phydev, MII_88E1318S_PHY_MAGIC_PACKET_WORD2,
+ ((phydev->attached_dev->dev_addr[5] << 8) |
+ phydev->attached_dev->dev_addr[4]));
+ if (err < 0)
+ return err;
+ err = phy_write(phydev, MII_88E1318S_PHY_MAGIC_PACKET_WORD1,
+ ((phydev->attached_dev->dev_addr[3] << 8) |
+ phydev->attached_dev->dev_addr[2]));
+ if (err < 0)
+ return err;
+ err = phy_write(phydev, MII_88E1318S_PHY_MAGIC_PACKET_WORD0,
+ ((phydev->attached_dev->dev_addr[1] << 8) |
+ phydev->attached_dev->dev_addr[0]));
+ if (err < 0)
+ return err;
+
+ /* Clear WOL status and enable magic packet matching */
+ temp = phy_read(phydev, MII_88E1318S_PHY_WOL_CTRL);
+ temp |= MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS;
+ temp |= MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE;
+ err = phy_write(phydev, MII_88E1318S_PHY_WOL_CTRL, temp);
+ if (err < 0)
+ return err;
+ } else {
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE,
+ MII_88E1318S_PHY_WOL_PAGE);
+ if (err < 0)
+ return err;
+
+ /* Clear WOL status and disable magic packet matching */
+ temp = phy_read(phydev, MII_88E1318S_PHY_WOL_CTRL);
+ temp |= MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS;
+ temp &= ~MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE;
+ err = phy_write(phydev, MII_88E1318S_PHY_WOL_CTRL, temp);
+ if (err < 0)
+ return err;
+ }
+
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static struct phy_driver marvell_drivers[] = {
+ {
+ .phy_id = MARVELL_PHY_ID_88E1101,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "Marvell 88E1101",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_aneg = &marvell_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .resume = &genphy_resume,
+ .suspend = &genphy_suspend,
+ .driver = { .owner = THIS_MODULE },
+ },
+ {
+ .phy_id = MARVELL_PHY_ID_88E1112,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "Marvell 88E1112",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &m88e1111_config_init,
+ .config_aneg = &marvell_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .resume = &genphy_resume,
+ .suspend = &genphy_suspend,
+ .driver = { .owner = THIS_MODULE },
+ },
+ {
+ .phy_id = MARVELL_PHY_ID_88E1111,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "Marvell 88E1111",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &m88e1111_config_init,
+ .config_aneg = &marvell_config_aneg,
+ .read_status = &marvell_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .resume = &genphy_resume,
+ .suspend = &genphy_suspend,
+ .driver = { .owner = THIS_MODULE },
+ },
+ {
+ .phy_id = MARVELL_PHY_ID_88E1118,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "Marvell 88E1118",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &m88e1118_config_init,
+ .config_aneg = &m88e1118_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .resume = &genphy_resume,
+ .suspend = &genphy_suspend,
+ .driver = {.owner = THIS_MODULE,},
+ },
+ {
+ .phy_id = MARVELL_PHY_ID_88E1121R,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "Marvell 88E1121R",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_aneg = &m88e1121_config_aneg,
+ .read_status = &marvell_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .did_interrupt = &m88e1121_did_interrupt,
+ .resume = &genphy_resume,
+ .suspend = &genphy_suspend,
+ .driver = { .owner = THIS_MODULE },
+ },
+ {
+ .phy_id = MARVELL_PHY_ID_88E1318S,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "Marvell 88E1318S",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_aneg = &m88e1318_config_aneg,
+ .read_status = &marvell_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .did_interrupt = &m88e1121_did_interrupt,
+ .get_wol = &m88e1318_get_wol,
+ .set_wol = &m88e1318_set_wol,
+ .resume = &genphy_resume,
+ .suspend = &genphy_suspend,
+ .driver = { .owner = THIS_MODULE },
+ },
+ {
+ .phy_id = MARVELL_PHY_ID_88E1145,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "Marvell 88E1145",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &m88e1145_config_init,
+ .config_aneg = &marvell_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .resume = &genphy_resume,
+ .suspend = &genphy_suspend,
+ .driver = { .owner = THIS_MODULE },
+ },
+ {
+ .phy_id = MARVELL_PHY_ID_88E1149R,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "Marvell 88E1149R",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &m88e1149_config_init,
+ .config_aneg = &m88e1118_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .resume = &genphy_resume,
+ .suspend = &genphy_suspend,
+ .driver = { .owner = THIS_MODULE },
+ },
+ {
+ .phy_id = MARVELL_PHY_ID_88E1240,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "Marvell 88E1240",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &m88e1111_config_init,
+ .config_aneg = &marvell_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .resume = &genphy_resume,
+ .suspend = &genphy_suspend,
+ .driver = { .owner = THIS_MODULE },
+ },
+ {
+ .phy_id = MARVELL_PHY_ID_88E1116R,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "Marvell 88E1116R",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &m88e1116r_config_init,
+ .config_aneg = &genphy_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .resume = &genphy_resume,
+ .suspend = &genphy_suspend,
+ .driver = { .owner = THIS_MODULE },
+ },
+ {
+ .phy_id = MARVELL_PHY_ID_88E1510,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "Marvell 88E1510",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_aneg = &m88e1510_config_aneg,
+ .read_status = &marvell_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .did_interrupt = &m88e1121_did_interrupt,
+ .resume = &genphy_resume,
+ .suspend = &genphy_suspend,
+ .driver = { .owner = THIS_MODULE },
+ },
+ {
+ .phy_id = MARVELL_PHY_ID_88E3016,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "Marvell 88E3016",
+ .features = PHY_BASIC_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_aneg = &genphy_config_aneg,
+ .config_init = &m88e3016_config_init,
+ .aneg_done = &marvell_aneg_done,
+ .read_status = &marvell_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .did_interrupt = &m88e1121_did_interrupt,
+ .resume = &genphy_resume,
+ .suspend = &genphy_suspend,
+ .driver = { .owner = THIS_MODULE },
+ },
+};
+
+module_phy_driver(marvell_drivers);
+
+static struct mdio_device_id __maybe_unused marvell_tbl[] = {
+ { MARVELL_PHY_ID_88E1101, MARVELL_PHY_ID_MASK },
+ { MARVELL_PHY_ID_88E1112, MARVELL_PHY_ID_MASK },
+ { MARVELL_PHY_ID_88E1111, MARVELL_PHY_ID_MASK },
+ { MARVELL_PHY_ID_88E1118, MARVELL_PHY_ID_MASK },
+ { MARVELL_PHY_ID_88E1121R, MARVELL_PHY_ID_MASK },
+ { MARVELL_PHY_ID_88E1145, MARVELL_PHY_ID_MASK },
+ { MARVELL_PHY_ID_88E1149R, MARVELL_PHY_ID_MASK },
+ { MARVELL_PHY_ID_88E1240, MARVELL_PHY_ID_MASK },
+ { MARVELL_PHY_ID_88E1318S, MARVELL_PHY_ID_MASK },
+ { MARVELL_PHY_ID_88E1116R, MARVELL_PHY_ID_MASK },
+ { MARVELL_PHY_ID_88E1510, MARVELL_PHY_ID_MASK },
+ { MARVELL_PHY_ID_88E3016, MARVELL_PHY_ID_MASK },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, marvell_tbl);
Code Review / kvmfornfv.git / blobdiff