Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / drivers / net / phy / Makefile

diff --git a/kernel/drivers/net/phy/Makefile b/kernel/drivers/net/phy/Makefile
new file mode 100644 (file)
index 0000000..501ea76
--- /dev/null
+++ b/kernel/drivers/net/phy/Makefile
@@ -0,0 +1,37 @@
+# Makefile for Linux PHY drivers
+
+libphy-objs                    := phy.o phy_device.o mdio_bus.o
+
+obj-$(CONFIG_PHYLIB)           += libphy.o
+obj-$(CONFIG_MARVELL_PHY)      += marvell.o
+obj-$(CONFIG_DAVICOM_PHY)      += davicom.o
+obj-$(CONFIG_CICADA_PHY)       += cicada.o
+obj-$(CONFIG_LXT_PHY)          += lxt.o
+obj-$(CONFIG_QSEMI_PHY)                += qsemi.o
+obj-$(CONFIG_SMSC_PHY)         += smsc.o
+obj-$(CONFIG_VITESSE_PHY)      += vitesse.o
+obj-$(CONFIG_BROADCOM_PHY)     += broadcom.o
+obj-$(CONFIG_BCM63XX_PHY)      += bcm63xx.o
+obj-$(CONFIG_BCM7XXX_PHY)      += bcm7xxx.o
+obj-$(CONFIG_BCM87XX_PHY)      += bcm87xx.o
+obj-$(CONFIG_ICPLUS_PHY)       += icplus.o
+obj-$(CONFIG_REALTEK_PHY)      += realtek.o
+obj-$(CONFIG_LSI_ET1011C_PHY)  += et1011c.o
+obj-$(CONFIG_FIXED_PHY)                += fixed_phy.o
+obj-$(CONFIG_MDIO_BITBANG)     += mdio-bitbang.o
+obj-$(CONFIG_MDIO_GPIO)                += mdio-gpio.o
+obj-$(CONFIG_NATIONAL_PHY)     += national.o
+obj-$(CONFIG_DP83640_PHY)      += dp83640.o
+obj-$(CONFIG_STE10XP)          += ste10Xp.o
+obj-$(CONFIG_MICREL_PHY)       += micrel.o
+obj-$(CONFIG_MDIO_OCTEON)      += mdio-octeon.o
+obj-$(CONFIG_MICREL_KS8995MA)  += spi_ks8995.o
+obj-$(CONFIG_AT803X_PHY)       += at803x.o
+obj-$(CONFIG_AMD_PHY)          += amd.o
+obj-$(CONFIG_MDIO_BUS_MUX)     += mdio-mux.o
+obj-$(CONFIG_MDIO_BUS_MUX_GPIO)        += mdio-mux-gpio.o
+obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += mdio-mux-mmioreg.o
+obj-$(CONFIG_MDIO_SUN4I)       += mdio-sun4i.o
+obj-$(CONFIG_MDIO_MOXART)      += mdio-moxart.o
+obj-$(CONFIG_AMD_XGBE_PHY)     += amd-xgbe-phy.o
+obj-$(CONFIG_MDIO_BCM_UNIMAC)  += mdio-bcm-unimac.o