--- /dev/null
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * See the file "skfddi.c" for further information.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ * FBI board dependent Driver for SMT and LLC
+ */
+
+#include "h/types.h"
+#include "h/fddi.h"
+#include "h/smc.h"
+#include "h/supern_2.h"
+#include "h/skfbiinc.h"
+#include <linux/bitrev.h>
+
+#ifndef lint
+static const char ID_sccs[] = "@(#)drvfbi.c 1.63 99/02/11 (C) SK " ;
+#endif
+
+/*
+ * PCM active state
+ */
+#define PC8_ACTIVE 8
+
+#define LED_Y_ON 0x11 /* Used for ring up/down indication */
+#define LED_Y_OFF 0x10
+
+
+#define MS2BCLK(x) ((x)*12500L)
+
+/*
+ * valid configuration values are:
+ */
+
+/*
+ * xPOS_ID:xxxx
+ * | \ /
+ * | \/
+ * | --------------------- the patched POS_ID of the Adapter
+ * | xxxx = (Vendor ID low byte,
+ * | Vendor ID high byte,
+ * | Device ID low byte,
+ * | Device ID high byte)
+ * +------------------------------ the patched oem_id must be
+ * 'S' for SK or 'I' for IBM
+ * this is a short id for the driver.
+ */
+#ifndef MULT_OEM
+#ifndef OEM_CONCEPT
+const u_char oem_id[] = "xPOS_ID:xxxx" ;
+#else /* OEM_CONCEPT */
+const u_char oem_id[] = OEM_ID ;
+#endif /* OEM_CONCEPT */
+#define ID_BYTE0 8
+#define OEMID(smc,i) oem_id[ID_BYTE0 + i]
+#else /* MULT_OEM */
+const struct s_oem_ids oem_ids[] = {
+#include "oemids.h"
+{0}
+};
+#define OEMID(smc,i) smc->hw.oem_id->oi_id[i]
+#endif /* MULT_OEM */
+
+/* Prototypes of external functions */
+#ifdef AIX
+extern int AIX_vpdReadByte() ;
+#endif
+
+
+/* Prototype of a local function. */
+static void smt_stop_watchdog(struct s_smc *smc);
+
+/*
+ * FDDI card reset
+ */
+static void card_start(struct s_smc *smc)
+{
+ int i ;
+#ifdef PCI
+ u_char rev_id ;
+ u_short word;
+#endif
+
+ smt_stop_watchdog(smc) ;
+
+#ifdef PCI
+ /*
+ * make sure no transfer activity is pending
+ */
+ outpw(FM_A(FM_MDREG1),FM_MINIT) ;
+ outp(ADDR(B0_CTRL), CTRL_HPI_SET) ;
+ hwt_wait_time(smc,hwt_quick_read(smc),MS2BCLK(10)) ;
+ /*
+ * now reset everything
+ */
+ outp(ADDR(B0_CTRL),CTRL_RST_SET) ; /* reset for all chips */
+ i = (int) inp(ADDR(B0_CTRL)) ; /* do dummy read */
+ SK_UNUSED(i) ; /* Make LINT happy. */
+ outp(ADDR(B0_CTRL), CTRL_RST_CLR) ;
+
+ /*
+ * Reset all bits in the PCI STATUS register
+ */
+ outp(ADDR(B0_TST_CTRL), TST_CFG_WRITE_ON) ; /* enable for writes */
+ word = inpw(PCI_C(PCI_STATUS)) ;
+ outpw(PCI_C(PCI_STATUS), word | PCI_ERRBITS) ;
+ outp(ADDR(B0_TST_CTRL), TST_CFG_WRITE_OFF) ; /* disable writes */
+
+ /*
+ * Release the reset of all the State machines
+ * Release Master_Reset
+ * Release HPI_SM_Reset
+ */
+ outp(ADDR(B0_CTRL), CTRL_MRST_CLR|CTRL_HPI_CLR) ;
+
+ /*
+ * determine the adapter type
+ * Note: Do it here, because some drivers may call card_start() once
+ * at very first before any other initialization functions is
+ * executed.
+ */
+ rev_id = inp(PCI_C(PCI_REV_ID)) ;
+ if ((rev_id & 0xf0) == SK_ML_ID_1 || (rev_id & 0xf0) == SK_ML_ID_2) {
+ smc->hw.hw_is_64bit = TRUE ;
+ } else {
+ smc->hw.hw_is_64bit = FALSE ;
+ }
+
+ /*
+ * Watermark initialization
+ */
+ if (!smc->hw.hw_is_64bit) {
+ outpd(ADDR(B4_R1_F), RX_WATERMARK) ;
+ outpd(ADDR(B5_XA_F), TX_WATERMARK) ;
+ outpd(ADDR(B5_XS_F), TX_WATERMARK) ;
+ }
+
+ outp(ADDR(B0_CTRL),CTRL_RST_CLR) ; /* clear the reset chips */
+ outp(ADDR(B0_LED),LED_GA_OFF|LED_MY_ON|LED_GB_OFF) ; /* ye LED on */
+
+ /* init the timer value for the watch dog 2,5 minutes */
+ outpd(ADDR(B2_WDOG_INI),0x6FC23AC0) ;
+
+ /* initialize the ISR mask */
+ smc->hw.is_imask = ISR_MASK ;
+ smc->hw.hw_state = STOPPED ;
+#endif
+ GET_PAGE(0) ; /* necessary for BOOT */
+}
+
+void card_stop(struct s_smc *smc)
+{
+ smt_stop_watchdog(smc) ;
+ smc->hw.mac_ring_is_up = 0 ; /* ring down */
+
+#ifdef PCI
+ /*
+ * make sure no transfer activity is pending
+ */
+ outpw(FM_A(FM_MDREG1),FM_MINIT) ;
+ outp(ADDR(B0_CTRL), CTRL_HPI_SET) ;
+ hwt_wait_time(smc,hwt_quick_read(smc),MS2BCLK(10)) ;
+ /*
+ * now reset everything
+ */
+ outp(ADDR(B0_CTRL),CTRL_RST_SET) ; /* reset for all chips */
+ outp(ADDR(B0_CTRL),CTRL_RST_CLR) ; /* reset for all chips */
+ outp(ADDR(B0_LED),LED_GA_OFF|LED_MY_OFF|LED_GB_OFF) ; /* all LEDs off */
+ smc->hw.hw_state = STOPPED ;
+#endif
+}
+/*--------------------------- ISR handling ----------------------------------*/
+
+void mac1_irq(struct s_smc *smc, u_short stu, u_short stl)
+{
+ int restart_tx = 0 ;
+again:
+
+ /*
+ * parity error: note encoding error is not possible in tag mode
+ */
+ if (stl & (FM_SPCEPDS | /* parity err. syn.q.*/
+ FM_SPCEPDA0 | /* parity err. a.q.0 */
+ FM_SPCEPDA1)) { /* parity err. a.q.1 */
+ SMT_PANIC(smc,SMT_E0134, SMT_E0134_MSG) ;
+ }
+ /*
+ * buffer underrun: can only occur if a tx threshold is specified
+ */
+ if (stl & (FM_STBURS | /* tx buffer underrun syn.q.*/
+ FM_STBURA0 | /* tx buffer underrun a.q.0 */
+ FM_STBURA1)) { /* tx buffer underrun a.q.2 */
+ SMT_PANIC(smc,SMT_E0133, SMT_E0133_MSG) ;
+ }
+
+ if ( (stu & (FM_SXMTABT | /* transmit abort */
+ FM_STXABRS | /* syn. tx abort */
+ FM_STXABRA0)) || /* asyn. tx abort */
+ (stl & (FM_SQLCKS | /* lock for syn. q. */
+ FM_SQLCKA0)) ) { /* lock for asyn. q. */
+ formac_tx_restart(smc) ; /* init tx */
+ restart_tx = 1 ;
+ stu = inpw(FM_A(FM_ST1U)) ;
+ stl = inpw(FM_A(FM_ST1L)) ;
+ stu &= ~ (FM_STECFRMA0 | FM_STEFRMA0 | FM_STEFRMS) ;
+ if (stu || stl)
+ goto again ;
+ }
+
+ if (stu & (FM_STEFRMA0 | /* end of asyn tx */
+ FM_STEFRMS)) { /* end of sync tx */
+ restart_tx = 1 ;
+ }
+
+ if (restart_tx)
+ llc_restart_tx(smc) ;
+}
+
+/*
+ * interrupt source= plc1
+ * this function is called in nwfbisr.asm
+ */
+void plc1_irq(struct s_smc *smc)
+{
+ u_short st = inpw(PLC(PB,PL_INTR_EVENT)) ;
+
+ plc_irq(smc,PB,st) ;
+}
+
+/*
+ * interrupt source= plc2
+ * this function is called in nwfbisr.asm
+ */
+void plc2_irq(struct s_smc *smc)
+{
+ u_short st = inpw(PLC(PA,PL_INTR_EVENT)) ;
+
+ plc_irq(smc,PA,st) ;
+}
+
+
+/*
+ * interrupt source= timer
+ */
+void timer_irq(struct s_smc *smc)
+{
+ hwt_restart(smc);
+ smc->hw.t_stop = smc->hw.t_start;
+ smt_timer_done(smc) ;
+}
+
+/*
+ * return S-port (PA or PB)
+ */
+int pcm_get_s_port(struct s_smc *smc)
+{
+ SK_UNUSED(smc) ;
+ return PS;
+}
+
+/*
+ * Station Label = "FDDI-XYZ" where
+ *
+ * X = connector type
+ * Y = PMD type
+ * Z = port type
+ */
+#define STATION_LABEL_CONNECTOR_OFFSET 5
+#define STATION_LABEL_PMD_OFFSET 6
+#define STATION_LABEL_PORT_OFFSET 7
+
+void read_address(struct s_smc *smc, u_char *mac_addr)
+{
+ char ConnectorType ;
+ char PmdType ;
+ int i ;
+
+#ifdef PCI
+ for (i = 0; i < 6; i++) { /* read mac address from board */
+ smc->hw.fddi_phys_addr.a[i] =
+ bitrev8(inp(ADDR(B2_MAC_0+i)));
+ }
+#endif
+
+ ConnectorType = inp(ADDR(B2_CONN_TYP)) ;
+ PmdType = inp(ADDR(B2_PMD_TYP)) ;
+
+ smc->y[PA].pmd_type[PMD_SK_CONN] =
+ smc->y[PB].pmd_type[PMD_SK_CONN] = ConnectorType ;
+ smc->y[PA].pmd_type[PMD_SK_PMD ] =
+ smc->y[PB].pmd_type[PMD_SK_PMD ] = PmdType ;
+
+ if (mac_addr) {
+ for (i = 0; i < 6 ;i++) {
+ smc->hw.fddi_canon_addr.a[i] = mac_addr[i] ;
+ smc->hw.fddi_home_addr.a[i] = bitrev8(mac_addr[i]);
+ }
+ return ;
+ }
+ smc->hw.fddi_home_addr = smc->hw.fddi_phys_addr ;
+
+ for (i = 0; i < 6 ;i++) {
+ smc->hw.fddi_canon_addr.a[i] =
+ bitrev8(smc->hw.fddi_phys_addr.a[i]);
+ }
+}
+
+/*
+ * FDDI card soft reset
+ */
+void init_board(struct s_smc *smc, u_char *mac_addr)
+{
+ card_start(smc) ;
+ read_address(smc,mac_addr) ;
+
+ if (!(inp(ADDR(B0_DAS)) & DAS_AVAIL))
+ smc->s.sas = SMT_SAS ; /* Single att. station */
+ else
+ smc->s.sas = SMT_DAS ; /* Dual att. station */
+
+ if (!(inp(ADDR(B0_DAS)) & DAS_BYP_ST))
+ smc->mib.fddiSMTBypassPresent = 0 ;
+ /* without opt. bypass */
+ else
+ smc->mib.fddiSMTBypassPresent = 1 ;
+ /* with opt. bypass */
+}
+
+/*
+ * insert or deinsert optical bypass (called by ECM)
+ */
+void sm_pm_bypass_req(struct s_smc *smc, int mode)
+{
+ DB_ECMN(1,"ECM : sm_pm_bypass_req(%s)\n",(mode == BP_INSERT) ?
+ "BP_INSERT" : "BP_DEINSERT",0) ;
+
+ if (smc->s.sas != SMT_DAS)
+ return ;
+
+#ifdef PCI
+ switch(mode) {
+ case BP_INSERT :
+ outp(ADDR(B0_DAS),DAS_BYP_INS) ; /* insert station */
+ break ;
+ case BP_DEINSERT :
+ outp(ADDR(B0_DAS),DAS_BYP_RMV) ; /* bypass station */
+ break ;
+ }
+#endif
+}
+
+/*
+ * check if bypass connected
+ */
+int sm_pm_bypass_present(struct s_smc *smc)
+{
+ return (inp(ADDR(B0_DAS)) & DAS_BYP_ST) ? TRUE : FALSE;
+}
+
+void plc_clear_irq(struct s_smc *smc, int p)
+{
+ SK_UNUSED(p) ;
+
+ SK_UNUSED(smc) ;
+}
+
+
+/*
+ * led_indication called by rmt_indication() and
+ * pcm_state_change()
+ *
+ * Input:
+ * smc: SMT context
+ * led_event:
+ * 0 Only switch green LEDs according to their respective PCM state
+ * LED_Y_OFF just switch yellow LED off
+ * LED_Y_ON just switch yello LED on
+ */
+static void led_indication(struct s_smc *smc, int led_event)
+{
+ /* use smc->hw.mac_ring_is_up == TRUE
+ * as indication for Ring Operational
+ */
+ u_short led_state ;
+ struct s_phy *phy ;
+ struct fddi_mib_p *mib_a ;
+ struct fddi_mib_p *mib_b ;
+
+ phy = &smc->y[PA] ;
+ mib_a = phy->mib ;
+ phy = &smc->y[PB] ;
+ mib_b = phy->mib ;
+
+#ifdef PCI
+ led_state = 0 ;
+
+ /* Ring up = yellow led OFF*/
+ if (led_event == LED_Y_ON) {
+ led_state |= LED_MY_ON ;
+ }
+ else if (led_event == LED_Y_OFF) {
+ led_state |= LED_MY_OFF ;
+ }
+ else { /* PCM state changed */
+ /* Link at Port A/S = green led A ON */
+ if (mib_a->fddiPORTPCMState == PC8_ACTIVE) {
+ led_state |= LED_GA_ON ;
+ }
+ else {
+ led_state |= LED_GA_OFF ;
+ }
+
+ /* Link at Port B = green led B ON */
+ if (mib_b->fddiPORTPCMState == PC8_ACTIVE) {
+ led_state |= LED_GB_ON ;
+ }
+ else {
+ led_state |= LED_GB_OFF ;
+ }
+ }
+
+ outp(ADDR(B0_LED), led_state) ;
+#endif /* PCI */
+
+}
+
+
+void pcm_state_change(struct s_smc *smc, int plc, int p_state)
+{
+ /*
+ * the current implementation of pcm_state_change() in the driver
+ * parts must be renamed to drv_pcm_state_change() which will be called
+ * now after led_indication.
+ */
+ DRV_PCM_STATE_CHANGE(smc,plc,p_state) ;
+
+ led_indication(smc,0) ;
+}
+
+
+void rmt_indication(struct s_smc *smc, int i)
+{
+ /* Call a driver special function if defined */
+ DRV_RMT_INDICATION(smc,i) ;
+
+ led_indication(smc, i ? LED_Y_OFF : LED_Y_ON) ;
+}
+
+
+/*
+ * llc_recover_tx called by init_tx (fplus.c)
+ */
+void llc_recover_tx(struct s_smc *smc)
+{
+#ifdef LOAD_GEN
+ extern int load_gen_flag ;
+
+ load_gen_flag = 0 ;
+#endif
+#ifndef SYNC
+ smc->hw.n_a_send= 0 ;
+#else
+ SK_UNUSED(smc) ;
+#endif
+}
+
+#ifdef MULT_OEM
+static int is_equal_num(char comp1[], char comp2[], int num)
+{
+ int i ;
+
+ for (i = 0 ; i < num ; i++) {
+ if (comp1[i] != comp2[i])
+ return 0;
+ }
+ return 1;
+} /* is_equal_num */
+
+
+/*
+ * set the OEM ID defaults, and test the contents of the OEM data base
+ * The default OEM is the first ACTIVE entry in the OEM data base
+ *
+ * returns: 0 success
+ * 1 error in data base
+ * 2 data base empty
+ * 3 no active entry
+ */
+int set_oi_id_def(struct s_smc *smc)
+{
+ int sel_id ;
+ int i ;
+ int act_entries ;
+
+ i = 0 ;
+ sel_id = -1 ;
+ act_entries = FALSE ;
+ smc->hw.oem_id = 0 ;
+ smc->hw.oem_min_status = OI_STAT_ACTIVE ;
+
+ /* check OEM data base */
+ while (oem_ids[i].oi_status) {
+ switch (oem_ids[i].oi_status) {
+ case OI_STAT_ACTIVE:
+ act_entries = TRUE ; /* we have active IDs */
+ if (sel_id == -1)
+ sel_id = i ; /* save the first active ID */
+ case OI_STAT_VALID:
+ case OI_STAT_PRESENT:
+ i++ ;
+ break ; /* entry ok */
+ default:
+ return 1; /* invalid oi_status */
+ }
+ }
+
+ if (i == 0)
+ return 2;
+ if (!act_entries)
+ return 3;
+
+ /* ok, we have a valid OEM data base with an active entry */
+ smc->hw.oem_id = (struct s_oem_ids *) &oem_ids[sel_id] ;
+ return 0;
+}
+#endif /* MULT_OEM */
+
+void driver_get_bia(struct s_smc *smc, struct fddi_addr *bia_addr)
+{
+ int i ;
+
+ for (i = 0 ; i < 6 ; i++)
+ bia_addr->a[i] = bitrev8(smc->hw.fddi_phys_addr.a[i]);
+}
+
+void smt_start_watchdog(struct s_smc *smc)
+{
+ SK_UNUSED(smc) ; /* Make LINT happy. */
+
+#ifndef DEBUG
+
+#ifdef PCI
+ if (smc->hw.wdog_used) {
+ outpw(ADDR(B2_WDOG_CRTL),TIM_START) ; /* Start timer. */
+ }
+#endif
+
+#endif /* DEBUG */
+}
+
+static void smt_stop_watchdog(struct s_smc *smc)
+{
+ SK_UNUSED(smc) ; /* Make LINT happy. */
+#ifndef DEBUG
+
+#ifdef PCI
+ if (smc->hw.wdog_used) {
+ outpw(ADDR(B2_WDOG_CRTL),TIM_STOP) ; /* Stop timer. */
+ }
+#endif
+
+#endif /* DEBUG */
+}
+
+#ifdef PCI
+
+void mac_do_pci_fix(struct s_smc *smc)
+{
+ SK_UNUSED(smc) ;
+}
+#endif /* PCI */
+
Code Review / kvmfornfv.git / blobdiff