--- /dev/null
+/*******************************************************************************
+ Copyright (C) 2007-2009 STMicroelectronics Ltd
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+*******************************************************************************/
+#ifndef __DWMAC1000_H__
+#define __DWMAC1000_H__
+
+#include <linux/phy.h>
+#include "common.h"
+
+#define GMAC_CONTROL 0x00000000 /* Configuration */
+#define GMAC_FRAME_FILTER 0x00000004 /* Frame Filter */
+#define GMAC_HASH_HIGH 0x00000008 /* Multicast Hash Table High */
+#define GMAC_HASH_LOW 0x0000000c /* Multicast Hash Table Low */
+#define GMAC_MII_ADDR 0x00000010 /* MII Address */
+#define GMAC_MII_DATA 0x00000014 /* MII Data */
+#define GMAC_FLOW_CTRL 0x00000018 /* Flow Control */
+#define GMAC_VLAN_TAG 0x0000001c /* VLAN Tag */
+#define GMAC_VERSION 0x00000020 /* GMAC CORE Version */
+#define GMAC_WAKEUP_FILTER 0x00000028 /* Wake-up Frame Filter */
+
+#define GMAC_INT_STATUS 0x00000038 /* interrupt status register */
+enum dwmac1000_irq_status {
+ lpiis_irq = 0x400,
+ time_stamp_irq = 0x0200,
+ mmc_rx_csum_offload_irq = 0x0080,
+ mmc_tx_irq = 0x0040,
+ mmc_rx_irq = 0x0020,
+ mmc_irq = 0x0010,
+ pmt_irq = 0x0008,
+ pcs_ane_irq = 0x0004,
+ pcs_link_irq = 0x0002,
+ rgmii_irq = 0x0001,
+};
+#define GMAC_INT_MASK 0x0000003c /* interrupt mask register */
+
+/* PMT Control and Status */
+#define GMAC_PMT 0x0000002c
+enum power_event {
+ pointer_reset = 0x80000000,
+ global_unicast = 0x00000200,
+ wake_up_rx_frame = 0x00000040,
+ magic_frame = 0x00000020,
+ wake_up_frame_en = 0x00000004,
+ magic_pkt_en = 0x00000002,
+ power_down = 0x00000001,
+};
+
+/* Energy Efficient Ethernet (EEE)
+ *
+ * LPI status, timer and control register offset
+ */
+#define LPI_CTRL_STATUS 0x0030
+#define LPI_TIMER_CTRL 0x0034
+
+/* LPI control and status defines */
+#define LPI_CTRL_STATUS_LPITXA 0x00080000 /* Enable LPI TX Automate */
+#define LPI_CTRL_STATUS_PLSEN 0x00040000 /* Enable PHY Link Status */
+#define LPI_CTRL_STATUS_PLS 0x00020000 /* PHY Link Status */
+#define LPI_CTRL_STATUS_LPIEN 0x00010000 /* LPI Enable */
+#define LPI_CTRL_STATUS_RLPIST 0x00000200 /* Receive LPI state */
+#define LPI_CTRL_STATUS_TLPIST 0x00000100 /* Transmit LPI state */
+#define LPI_CTRL_STATUS_RLPIEX 0x00000008 /* Receive LPI Exit */
+#define LPI_CTRL_STATUS_RLPIEN 0x00000004 /* Receive LPI Entry */
+#define LPI_CTRL_STATUS_TLPIEX 0x00000002 /* Transmit LPI Exit */
+#define LPI_CTRL_STATUS_TLPIEN 0x00000001 /* Transmit LPI Entry */
+
+/* GMAC HW ADDR regs */
+#define GMAC_ADDR_HIGH(reg) (((reg > 15) ? 0x00000800 : 0x00000040) + \
+ (reg * 8))
+#define GMAC_ADDR_LOW(reg) (((reg > 15) ? 0x00000804 : 0x00000044) + \
+ (reg * 8))
+#define GMAC_MAX_PERFECT_ADDRESSES 1
+
+/* PCS registers (AN/TBI/SGMII/RGMII) offset */
+#define GMAC_AN_CTRL 0x000000c0 /* AN control */
+#define GMAC_AN_STATUS 0x000000c4 /* AN status */
+#define GMAC_ANE_ADV 0x000000c8 /* Auto-Neg. Advertisement */
+#define GMAC_ANE_LPA 0x000000cc /* Auto-Neg. link partener ability */
+#define GMAC_ANE_EXP 0x000000d0 /* ANE expansion */
+#define GMAC_TBI 0x000000d4 /* TBI extend status */
+#define GMAC_S_R_GMII 0x000000d8 /* SGMII RGMII status */
+
+/* AN Configuration defines */
+#define GMAC_AN_CTRL_RAN 0x00000200 /* Restart Auto-Negotiation */
+#define GMAC_AN_CTRL_ANE 0x00001000 /* Auto-Negotiation Enable */
+#define GMAC_AN_CTRL_ELE 0x00004000 /* External Loopback Enable */
+#define GMAC_AN_CTRL_ECD 0x00010000 /* Enable Comma Detect */
+#define GMAC_AN_CTRL_LR 0x00020000 /* Lock to Reference */
+#define GMAC_AN_CTRL_SGMRAL 0x00040000 /* SGMII RAL Control */
+
+/* AN Status defines */
+#define GMAC_AN_STATUS_LS 0x00000004 /* Link Status 0:down 1:up */
+#define GMAC_AN_STATUS_ANA 0x00000008 /* Auto-Negotiation Ability */
+#define GMAC_AN_STATUS_ANC 0x00000020 /* Auto-Negotiation Complete */
+#define GMAC_AN_STATUS_ES 0x00000100 /* Extended Status */
+
+/* Register 54 (SGMII/RGMII status register) */
+#define GMAC_S_R_GMII_LINK 0x8
+#define GMAC_S_R_GMII_SPEED 0x5
+#define GMAC_S_R_GMII_SPEED_SHIFT 0x1
+#define GMAC_S_R_GMII_MODE 0x1
+#define GMAC_S_R_GMII_SPEED_125 2
+#define GMAC_S_R_GMII_SPEED_25 1
+
+/* Common ADV and LPA defines */
+#define GMAC_ANE_FD (1 << 5)
+#define GMAC_ANE_HD (1 << 6)
+#define GMAC_ANE_PSE (3 << 7)
+#define GMAC_ANE_PSE_SHIFT 7
+
+/* GMAC Configuration defines */
+#define GMAC_CONTROL_2K 0x08000000 /* IEEE 802.3as 2K packets */
+#define GMAC_CONTROL_TC 0x01000000 /* Transmit Conf. in RGMII/SGMII */
+#define GMAC_CONTROL_WD 0x00800000 /* Disable Watchdog on receive */
+#define GMAC_CONTROL_JD 0x00400000 /* Jabber disable */
+#define GMAC_CONTROL_BE 0x00200000 /* Frame Burst Enable */
+#define GMAC_CONTROL_JE 0x00100000 /* Jumbo frame */
+enum inter_frame_gap {
+ GMAC_CONTROL_IFG_88 = 0x00040000,
+ GMAC_CONTROL_IFG_80 = 0x00020000,
+ GMAC_CONTROL_IFG_40 = 0x000e0000,
+};
+#define GMAC_CONTROL_DCRS 0x00010000 /* Disable carrier sense */
+#define GMAC_CONTROL_PS 0x00008000 /* Port Select 0:GMI 1:MII */
+#define GMAC_CONTROL_FES 0x00004000 /* Speed 0:10 1:100 */
+#define GMAC_CONTROL_DO 0x00002000 /* Disable Rx Own */
+#define GMAC_CONTROL_LM 0x00001000 /* Loop-back mode */
+#define GMAC_CONTROL_DM 0x00000800 /* Duplex Mode */
+#define GMAC_CONTROL_IPC 0x00000400 /* Checksum Offload */
+#define GMAC_CONTROL_DR 0x00000200 /* Disable Retry */
+#define GMAC_CONTROL_LUD 0x00000100 /* Link up/down */
+#define GMAC_CONTROL_ACS 0x00000080 /* Auto Pad/FCS Stripping */
+#define GMAC_CONTROL_DC 0x00000010 /* Deferral Check */
+#define GMAC_CONTROL_TE 0x00000008 /* Transmitter Enable */
+#define GMAC_CONTROL_RE 0x00000004 /* Receiver Enable */
+
+#define GMAC_CORE_INIT (GMAC_CONTROL_JD | GMAC_CONTROL_PS | GMAC_CONTROL_ACS | \
+ GMAC_CONTROL_BE | GMAC_CONTROL_DCRS)
+
+/* GMAC Frame Filter defines */
+#define GMAC_FRAME_FILTER_PR 0x00000001 /* Promiscuous Mode */
+#define GMAC_FRAME_FILTER_HUC 0x00000002 /* Hash Unicast */
+#define GMAC_FRAME_FILTER_HMC 0x00000004 /* Hash Multicast */
+#define GMAC_FRAME_FILTER_DAIF 0x00000008 /* DA Inverse Filtering */
+#define GMAC_FRAME_FILTER_PM 0x00000010 /* Pass all multicast */
+#define GMAC_FRAME_FILTER_DBF 0x00000020 /* Disable Broadcast frames */
+#define GMAC_FRAME_FILTER_SAIF 0x00000100 /* Inverse Filtering */
+#define GMAC_FRAME_FILTER_SAF 0x00000200 /* Source Address Filter */
+#define GMAC_FRAME_FILTER_HPF 0x00000400 /* Hash or perfect Filter */
+#define GMAC_FRAME_FILTER_RA 0x80000000 /* Receive all mode */
+/* GMII ADDR defines */
+#define GMAC_MII_ADDR_WRITE 0x00000002 /* MII Write */
+#define GMAC_MII_ADDR_BUSY 0x00000001 /* MII Busy */
+/* GMAC FLOW CTRL defines */
+#define GMAC_FLOW_CTRL_PT_MASK 0xffff0000 /* Pause Time Mask */
+#define GMAC_FLOW_CTRL_PT_SHIFT 16
+#define GMAC_FLOW_CTRL_UP 0x00000008 /* Unicast pause frame enable */
+#define GMAC_FLOW_CTRL_RFE 0x00000004 /* Rx Flow Control Enable */
+#define GMAC_FLOW_CTRL_TFE 0x00000002 /* Tx Flow Control Enable */
+#define GMAC_FLOW_CTRL_FCB_BPA 0x00000001 /* Flow Control Busy ... */
+
+/*--- DMA BLOCK defines ---*/
+/* DMA Bus Mode register defines */
+#define DMA_BUS_MODE_SFT_RESET 0x00000001 /* Software Reset */
+#define DMA_BUS_MODE_DA 0x00000002 /* Arbitration scheme */
+#define DMA_BUS_MODE_DSL_MASK 0x0000007c /* Descriptor Skip Length */
+#define DMA_BUS_MODE_DSL_SHIFT 2 /* (in DWORDS) */
+/* Programmable burst length (passed thorugh platform)*/
+#define DMA_BUS_MODE_PBL_MASK 0x00003f00 /* Programmable Burst Len */
+#define DMA_BUS_MODE_PBL_SHIFT 8
+#define DMA_BUS_MODE_ATDS 0x00000080 /* Alternate Descriptor Size */
+
+enum rx_tx_priority_ratio {
+ double_ratio = 0x00004000, /* 2:1 */
+ triple_ratio = 0x00008000, /* 3:1 */
+ quadruple_ratio = 0x0000c000, /* 4:1 */
+};
+
+#define DMA_BUS_MODE_FB 0x00010000 /* Fixed burst */
+#define DMA_BUS_MODE_MB 0x04000000 /* Mixed burst */
+#define DMA_BUS_MODE_RPBL_MASK 0x003e0000 /* Rx-Programmable Burst Len */
+#define DMA_BUS_MODE_RPBL_SHIFT 17
+#define DMA_BUS_MODE_USP 0x00800000
+#define DMA_BUS_MODE_PBL 0x01000000
+#define DMA_BUS_MODE_AAL 0x02000000
+
+/* DMA CRS Control and Status Register Mapping */
+#define DMA_HOST_TX_DESC 0x00001048 /* Current Host Tx descriptor */
+#define DMA_HOST_RX_DESC 0x0000104c /* Current Host Rx descriptor */
+/* DMA Bus Mode register defines */
+#define DMA_BUS_PR_RATIO_MASK 0x0000c000 /* Rx/Tx priority ratio */
+#define DMA_BUS_PR_RATIO_SHIFT 14
+#define DMA_BUS_FB 0x00010000 /* Fixed Burst */
+
+/* DMA operation mode defines (start/stop tx/rx are placed in common header)*/
+/* Disable Drop TCP/IP csum error */
+#define DMA_CONTROL_DT 0x04000000
+#define DMA_CONTROL_RSF 0x02000000 /* Receive Store and Forward */
+#define DMA_CONTROL_DFF 0x01000000 /* Disaable flushing */
+/* Threshold for Activating the FC */
+enum rfa {
+ act_full_minus_1 = 0x00800000,
+ act_full_minus_2 = 0x00800200,
+ act_full_minus_3 = 0x00800400,
+ act_full_minus_4 = 0x00800600,
+};
+/* Threshold for Deactivating the FC */
+enum rfd {
+ deac_full_minus_1 = 0x00400000,
+ deac_full_minus_2 = 0x00400800,
+ deac_full_minus_3 = 0x00401000,
+ deac_full_minus_4 = 0x00401800,
+};
+#define DMA_CONTROL_TSF 0x00200000 /* Transmit Store and Forward */
+
+enum ttc_control {
+ DMA_CONTROL_TTC_64 = 0x00000000,
+ DMA_CONTROL_TTC_128 = 0x00004000,
+ DMA_CONTROL_TTC_192 = 0x00008000,
+ DMA_CONTROL_TTC_256 = 0x0000c000,
+ DMA_CONTROL_TTC_40 = 0x00010000,
+ DMA_CONTROL_TTC_32 = 0x00014000,
+ DMA_CONTROL_TTC_24 = 0x00018000,
+ DMA_CONTROL_TTC_16 = 0x0001c000,
+};
+#define DMA_CONTROL_TC_TX_MASK 0xfffe3fff
+
+#define DMA_CONTROL_EFC 0x00000100
+#define DMA_CONTROL_FEF 0x00000080
+#define DMA_CONTROL_FUF 0x00000040
+
+/* Receive flow control activation field
+ * RFA field in DMA control register, bits 23,10:9
+ */
+#define DMA_CONTROL_RFA_MASK 0x00800600
+
+/* Receive flow control deactivation field
+ * RFD field in DMA control register, bits 22,12:11
+ */
+#define DMA_CONTROL_RFD_MASK 0x00401800
+
+/* RFD and RFA fields are encoded as follows
+ *
+ * Bit Field
+ * 0,00 - Full minus 1KB (only valid when rxfifo >= 4KB and EFC enabled)
+ * 0,01 - Full minus 2KB (only valid when rxfifo >= 4KB and EFC enabled)
+ * 0,10 - Full minus 3KB (only valid when rxfifo >= 4KB and EFC enabled)
+ * 0,11 - Full minus 4KB (only valid when rxfifo > 4KB and EFC enabled)
+ * 1,00 - Full minus 5KB (only valid when rxfifo > 8KB and EFC enabled)
+ * 1,01 - Full minus 6KB (only valid when rxfifo > 8KB and EFC enabled)
+ * 1,10 - Full minus 7KB (only valid when rxfifo > 8KB and EFC enabled)
+ * 1,11 - Reserved
+ *
+ * RFD should always be > RFA for a given FIFO size. RFD == RFA may work,
+ * but packet throughput performance may not be as expected.
+ *
+ * Be sure that bit 3 in GMAC Register 6 is set for Unicast Pause frame
+ * detection (IEEE Specification Requirement, Annex 31B, 31B.1, Pause
+ * Description).
+ *
+ * Be sure that DZPA (bit 7 in Flow Control Register, GMAC Register 6),
+ * is set to 0. This allows pause frames with a quanta of 0 to be sent
+ * as an XOFF message to the link peer.
+ */
+
+#define RFA_FULL_MINUS_1K 0x00000000
+#define RFA_FULL_MINUS_2K 0x00000200
+#define RFA_FULL_MINUS_3K 0x00000400
+#define RFA_FULL_MINUS_4K 0x00000600
+#define RFA_FULL_MINUS_5K 0x00800000
+#define RFA_FULL_MINUS_6K 0x00800200
+#define RFA_FULL_MINUS_7K 0x00800400
+
+#define RFD_FULL_MINUS_1K 0x00000000
+#define RFD_FULL_MINUS_2K 0x00000800
+#define RFD_FULL_MINUS_3K 0x00001000
+#define RFD_FULL_MINUS_4K 0x00001800
+#define RFD_FULL_MINUS_5K 0x00400000
+#define RFD_FULL_MINUS_6K 0x00400800
+#define RFD_FULL_MINUS_7K 0x00401000
+
+enum rtc_control {
+ DMA_CONTROL_RTC_64 = 0x00000000,
+ DMA_CONTROL_RTC_32 = 0x00000008,
+ DMA_CONTROL_RTC_96 = 0x00000010,
+ DMA_CONTROL_RTC_128 = 0x00000018,
+};
+#define DMA_CONTROL_TC_RX_MASK 0xffffffe7
+
+#define DMA_CONTROL_OSF 0x00000004 /* Operate on second frame */
+
+/* MMC registers offset */
+#define GMAC_MMC_CTRL 0x100
+#define GMAC_MMC_RX_INTR 0x104
+#define GMAC_MMC_TX_INTR 0x108
+#define GMAC_MMC_RX_CSUM_OFFLOAD 0x208
+#define GMAC_EXTHASH_BASE 0x500
+
+extern const struct stmmac_dma_ops dwmac1000_dma_ops;
+#endif /* __DWMAC1000_H__ */
Code Review / kvmfornfv.git / blobdiff