#ifndef _SMC91X_H_
#define _SMC91X_H_
+#include <linux/dmaengine.h>
#include <linux/smc91x.h>
+/*
+ * Any 16-bit access is performed with two 8-bit accesses if the hardware
+ * can't do it directly. Most registers are 16-bit so those are mandatory.
+ */
+#define SMC_outw_b(x, a, r) \
+ do { \
+ unsigned int __val16 = (x); \
+ unsigned int __reg = (r); \
+ SMC_outb(__val16, a, __reg); \
+ SMC_outb(__val16 >> 8, a, __reg + (1 << SMC_IO_SHIFT)); \
+ } while (0)
+
+#define SMC_inw_b(a, r) \
+ ({ \
+ unsigned int __val16; \
+ unsigned int __reg = r; \
+ __val16 = SMC_inb(a, __reg); \
+ __val16 |= SMC_inb(a, __reg + (1 << SMC_IO_SHIFT)) << 8; \
+ __val16; \
+ })
+
/*
* Define your architecture specific bus configuration parameters here.
*/
#define SMC_IO_SHIFT (lp->io_shift)
#define SMC_inb(a, r) readb((a) + (r))
-#define SMC_inw(a, r) readw((a) + (r))
+#define SMC_inw(a, r) \
+ ({ \
+ unsigned int __smc_r = r; \
+ SMC_16BIT(lp) ? readw((a) + __smc_r) : \
+ SMC_8BIT(lp) ? SMC_inw_b(a, __smc_r) : \
+ ({ BUG(); 0; }); \
+ })
+
#define SMC_inl(a, r) readl((a) + (r))
#define SMC_outb(v, a, r) writeb(v, (a) + (r))
+#define SMC_outw(v, a, r) \
+ do { \
+ unsigned int __v = v, __smc_r = r; \
+ if (SMC_16BIT(lp)) \
+ __SMC_outw(__v, a, __smc_r); \
+ else if (SMC_8BIT(lp)) \
+ SMC_outw_b(__v, a, __smc_r); \
+ else \
+ BUG(); \
+ } while (0)
+
#define SMC_outl(v, a, r) writel(v, (a) + (r))
+#define SMC_insb(a, r, p, l) readsb((a) + (r), p, l)
+#define SMC_outsb(a, r, p, l) writesb((a) + (r), p, l)
#define SMC_insw(a, r, p, l) readsw((a) + (r), p, l)
#define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l)
#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l)
#define SMC_IRQ_FLAGS (-1) /* from resource */
/* We actually can't write halfwords properly if not word aligned */
-static inline void SMC_outw(u16 val, void __iomem *ioaddr, int reg)
+static inline void __SMC_outw(u16 val, void __iomem *ioaddr, int reg)
{
if ((machine_is_mainstone() || machine_is_stargate2() ||
machine_is_pxa_idp()) && reg & 2) {
u_long physaddr;
struct device *device;
#endif
+ struct dma_chan *dma_chan;
void __iomem *base;
void __iomem *datacs;
* as RX which can overrun memory and lose packets.
*/
#include <linux/dma-mapping.h>
-#include <mach/dma.h>
+#include <linux/dma/pxa-dma.h>
#ifdef SMC_insl
#undef SMC_insl
#define SMC_insl(a, r, p, l) \
smc_pxa_dma_insl(a, lp, r, dev->dma, p, l)
+static inline void
+smc_pxa_dma_inpump(struct smc_local *lp, u_char *buf, int len)
+{
+ dma_addr_t dmabuf;
+ struct dma_async_tx_descriptor *tx;
+ dma_cookie_t cookie;
+ enum dma_status status;
+ struct dma_tx_state state;
+
+ dmabuf = dma_map_single(lp->device, buf, len, DMA_FROM_DEVICE);
+ tx = dmaengine_prep_slave_single(lp->dma_chan, dmabuf, len,
+ DMA_DEV_TO_MEM, 0);
+ if (tx) {
+ cookie = dmaengine_submit(tx);
+ dma_async_issue_pending(lp->dma_chan);
+ do {
+ status = dmaengine_tx_status(lp->dma_chan, cookie,
+ &state);
+ cpu_relax();
+ } while (status != DMA_COMPLETE && status != DMA_ERROR &&
+ state.residue);
+ dmaengine_terminate_all(lp->dma_chan);
+ }
+ dma_unmap_single(lp->device, dmabuf, len, DMA_FROM_DEVICE);
+}
+
static inline void
smc_pxa_dma_insl(void __iomem *ioaddr, struct smc_local *lp, int reg, int dma,
u_char *buf, int len)
{
- u_long physaddr = lp->physaddr;
- dma_addr_t dmabuf;
+ struct dma_slave_config config;
+ int ret;
/* fallback if no DMA available */
- if (dma == (unsigned char)-1) {
+ if (!lp->dma_chan) {
readsl(ioaddr + reg, buf, len);
return;
}
len--;
}
+ memset(&config, 0, sizeof(config));
+ config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ config.src_addr = lp->physaddr + reg;
+ config.dst_addr = lp->physaddr + reg;
+ config.src_maxburst = 32;
+ config.dst_maxburst = 32;
+ ret = dmaengine_slave_config(lp->dma_chan, &config);
+ if (ret) {
+ dev_err(lp->device, "dma channel configuration failed: %d\n",
+ ret);
+ return;
+ }
+
len *= 4;
- dmabuf = dma_map_single(lp->device, buf, len, DMA_FROM_DEVICE);
- DCSR(dma) = DCSR_NODESC;
- DTADR(dma) = dmabuf;
- DSADR(dma) = physaddr + reg;
- DCMD(dma) = (DCMD_INCTRGADDR | DCMD_BURST32 |
- DCMD_WIDTH4 | (DCMD_LENGTH & len));
- DCSR(dma) = DCSR_NODESC | DCSR_RUN;
- while (!(DCSR(dma) & DCSR_STOPSTATE))
- cpu_relax();
- DCSR(dma) = 0;
- dma_unmap_single(lp->device, dmabuf, len, DMA_FROM_DEVICE);
+ smc_pxa_dma_inpump(lp, buf, len);
}
#endif
smc_pxa_dma_insw(void __iomem *ioaddr, struct smc_local *lp, int reg, int dma,
u_char *buf, int len)
{
- u_long physaddr = lp->physaddr;
- dma_addr_t dmabuf;
+ struct dma_slave_config config;
+ int ret;
/* fallback if no DMA available */
- if (dma == (unsigned char)-1) {
+ if (!lp->dma_chan) {
readsw(ioaddr + reg, buf, len);
return;
}
len--;
}
+ memset(&config, 0, sizeof(config));
+ config.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
+ config.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
+ config.src_addr = lp->physaddr + reg;
+ config.dst_addr = lp->physaddr + reg;
+ config.src_maxburst = 32;
+ config.dst_maxburst = 32;
+ ret = dmaengine_slave_config(lp->dma_chan, &config);
+ if (ret) {
+ dev_err(lp->device, "dma channel configuration failed: %d\n",
+ ret);
+ return;
+ }
+
len *= 2;
- dmabuf = dma_map_single(lp->device, buf, len, DMA_FROM_DEVICE);
- DCSR(dma) = DCSR_NODESC;
- DTADR(dma) = dmabuf;
- DSADR(dma) = physaddr + reg;
- DCMD(dma) = (DCMD_INCTRGADDR | DCMD_BURST32 |
- DCMD_WIDTH2 | (DCMD_LENGTH & len));
- DCSR(dma) = DCSR_NODESC | DCSR_RUN;
- while (!(DCSR(dma) & DCSR_STOPSTATE))
- cpu_relax();
- DCSR(dma) = 0;
- dma_unmap_single(lp->device, dmabuf, len, DMA_FROM_DEVICE);
+ smc_pxa_dma_inpump(lp, buf, len);
}
#endif
-static void
-smc_pxa_dma_irq(int dma, void *dummy)
-{
- DCSR(dma) = 0;
-}
#endif /* CONFIG_ARCH_PXA */
#if ! SMC_CAN_USE_16BIT
-/*
- * Any 16-bit access is performed with two 8-bit accesses if the hardware
- * can't do it directly. Most registers are 16-bit so those are mandatory.
- */
-#define SMC_outw(x, ioaddr, reg) \
- do { \
- unsigned int __val16 = (x); \
- SMC_outb( __val16, ioaddr, reg ); \
- SMC_outb( __val16 >> 8, ioaddr, reg + (1 << SMC_IO_SHIFT));\
- } while (0)
-#define SMC_inw(ioaddr, reg) \
- ({ \
- unsigned int __val16; \
- __val16 = SMC_inb( ioaddr, reg ); \
- __val16 |= SMC_inb( ioaddr, reg + (1 << SMC_IO_SHIFT)) << 8; \
- __val16; \
- })
-
+#define SMC_outw(x, ioaddr, reg) SMC_outw_b(x, ioaddr, reg)
+#define SMC_inw(ioaddr, reg) SMC_inw_b(ioaddr, reg)
#define SMC_insw(a, r, p, l) BUG()
#define SMC_outsw(a, r, p, l) BUG()
Code Review / kvmfornfv.git / blobdiff