--- /dev/null
+/* Intel(R) Gigabit Ethernet Linux driver
+ * Copyright(c) 2007-2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/vmalloc.h>
+#include <linux/pagemap.h>
+#include <linux/netdevice.h>
+#include <linux/ipv6.h>
+#include <linux/slab.h>
+#include <net/checksum.h>
+#include <net/ip6_checksum.h>
+#include <linux/net_tstamp.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/if.h>
+#include <linux/if_vlan.h>
+#include <linux/pci.h>
+#include <linux/pci-aspm.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/sctp.h>
+#include <linux/if_ether.h>
+#include <linux/aer.h>
+#include <linux/prefetch.h>
+#include <linux/pm_runtime.h>
+#ifdef CONFIG_IGB_DCA
+#include <linux/dca.h>
+#endif
+#include <linux/i2c.h>
+#include "igb.h"
+
+#define MAJ 5
+#define MIN 2
+#define BUILD 15
+#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \
+__stringify(BUILD) "-k"
+char igb_driver_name[] = "igb";
+char igb_driver_version[] = DRV_VERSION;
+static const char igb_driver_string[] =
+ "Intel(R) Gigabit Ethernet Network Driver";
+static const char igb_copyright[] =
+ "Copyright (c) 2007-2014 Intel Corporation.";
+
+static const struct e1000_info *igb_info_tbl[] = {
+ [board_82575] = &e1000_82575_info,
+};
+
+static const struct pci_device_id igb_pci_tbl[] = {
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I354_BACKPLANE_1GBPS) },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I354_SGMII) },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I354_BACKPLANE_2_5GBPS) },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I211_COPPER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_COPPER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_FIBER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_SERDES), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_SGMII), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_COPPER_FLASHLESS), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_SERDES_FLASHLESS), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_COPPER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_FIBER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_SERDES), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_SGMII), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_COPPER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_FIBER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_QUAD_FIBER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_SERDES), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_SGMII), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_COPPER_DUAL), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SGMII), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SERDES), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_BACKPLANE), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SFP), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_NS), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_NS_SERDES), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_FIBER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES_QUAD), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_QUAD_COPPER_ET2), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_QUAD_COPPER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_COPPER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_FIBER_SERDES), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575GB_QUAD_COPPER), board_82575 },
+ /* required last entry */
+ {0, }
+};
+
+MODULE_DEVICE_TABLE(pci, igb_pci_tbl);
+
+static int igb_setup_all_tx_resources(struct igb_adapter *);
+static int igb_setup_all_rx_resources(struct igb_adapter *);
+static void igb_free_all_tx_resources(struct igb_adapter *);
+static void igb_free_all_rx_resources(struct igb_adapter *);
+static void igb_setup_mrqc(struct igb_adapter *);
+static int igb_probe(struct pci_dev *, const struct pci_device_id *);
+static void igb_remove(struct pci_dev *pdev);
+static int igb_sw_init(struct igb_adapter *);
+static int igb_open(struct net_device *);
+static int igb_close(struct net_device *);
+static void igb_configure(struct igb_adapter *);
+static void igb_configure_tx(struct igb_adapter *);
+static void igb_configure_rx(struct igb_adapter *);
+static void igb_clean_all_tx_rings(struct igb_adapter *);
+static void igb_clean_all_rx_rings(struct igb_adapter *);
+static void igb_clean_tx_ring(struct igb_ring *);
+static void igb_clean_rx_ring(struct igb_ring *);
+static void igb_set_rx_mode(struct net_device *);
+static void igb_update_phy_info(unsigned long);
+static void igb_watchdog(unsigned long);
+static void igb_watchdog_task(struct work_struct *);
+static netdev_tx_t igb_xmit_frame(struct sk_buff *skb, struct net_device *);
+static struct rtnl_link_stats64 *igb_get_stats64(struct net_device *dev,
+ struct rtnl_link_stats64 *stats);
+static int igb_change_mtu(struct net_device *, int);
+static int igb_set_mac(struct net_device *, void *);
+static void igb_set_uta(struct igb_adapter *adapter);
+static irqreturn_t igb_intr(int irq, void *);
+static irqreturn_t igb_intr_msi(int irq, void *);
+static irqreturn_t igb_msix_other(int irq, void *);
+static irqreturn_t igb_msix_ring(int irq, void *);
+#ifdef CONFIG_IGB_DCA
+static void igb_update_dca(struct igb_q_vector *);
+static void igb_setup_dca(struct igb_adapter *);
+#endif /* CONFIG_IGB_DCA */
+static int igb_poll(struct napi_struct *, int);
+static bool igb_clean_tx_irq(struct igb_q_vector *);
+static bool igb_clean_rx_irq(struct igb_q_vector *, int);
+static int igb_ioctl(struct net_device *, struct ifreq *, int cmd);
+static void igb_tx_timeout(struct net_device *);
+static void igb_reset_task(struct work_struct *);
+static void igb_vlan_mode(struct net_device *netdev,
+ netdev_features_t features);
+static int igb_vlan_rx_add_vid(struct net_device *, __be16, u16);
+static int igb_vlan_rx_kill_vid(struct net_device *, __be16, u16);
+static void igb_restore_vlan(struct igb_adapter *);
+static void igb_rar_set_qsel(struct igb_adapter *, u8 *, u32 , u8);
+static void igb_ping_all_vfs(struct igb_adapter *);
+static void igb_msg_task(struct igb_adapter *);
+static void igb_vmm_control(struct igb_adapter *);
+static int igb_set_vf_mac(struct igb_adapter *, int, unsigned char *);
+static void igb_restore_vf_multicasts(struct igb_adapter *adapter);
+static int igb_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac);
+static int igb_ndo_set_vf_vlan(struct net_device *netdev,
+ int vf, u16 vlan, u8 qos);
+static int igb_ndo_set_vf_bw(struct net_device *, int, int, int);
+static int igb_ndo_set_vf_spoofchk(struct net_device *netdev, int vf,
+ bool setting);
+static int igb_ndo_get_vf_config(struct net_device *netdev, int vf,
+ struct ifla_vf_info *ivi);
+static void igb_check_vf_rate_limit(struct igb_adapter *);
+
+#ifdef CONFIG_PCI_IOV
+static int igb_vf_configure(struct igb_adapter *adapter, int vf);
+static int igb_pci_enable_sriov(struct pci_dev *dev, int num_vfs);
+#endif
+
+#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
+static int igb_suspend(struct device *);
+#endif
+static int igb_resume(struct device *);
+static int igb_runtime_suspend(struct device *dev);
+static int igb_runtime_resume(struct device *dev);
+static int igb_runtime_idle(struct device *dev);
+static const struct dev_pm_ops igb_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(igb_suspend, igb_resume)
+ SET_RUNTIME_PM_OPS(igb_runtime_suspend, igb_runtime_resume,
+ igb_runtime_idle)
+};
+#endif
+static void igb_shutdown(struct pci_dev *);
+static int igb_pci_sriov_configure(struct pci_dev *dev, int num_vfs);
+#ifdef CONFIG_IGB_DCA
+static int igb_notify_dca(struct notifier_block *, unsigned long, void *);
+static struct notifier_block dca_notifier = {
+ .notifier_call = igb_notify_dca,
+ .next = NULL,
+ .priority = 0
+};
+#endif
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/* for netdump / net console */
+static void igb_netpoll(struct net_device *);
+#endif
+#ifdef CONFIG_PCI_IOV
+static unsigned int max_vfs;
+module_param(max_vfs, uint, 0);
+MODULE_PARM_DESC(max_vfs, "Maximum number of virtual functions to allocate per physical function");
+#endif /* CONFIG_PCI_IOV */
+
+static pci_ers_result_t igb_io_error_detected(struct pci_dev *,
+ pci_channel_state_t);
+static pci_ers_result_t igb_io_slot_reset(struct pci_dev *);
+static void igb_io_resume(struct pci_dev *);
+
+static const struct pci_error_handlers igb_err_handler = {
+ .error_detected = igb_io_error_detected,
+ .slot_reset = igb_io_slot_reset,
+ .resume = igb_io_resume,
+};
+
+static void igb_init_dmac(struct igb_adapter *adapter, u32 pba);
+
+static struct pci_driver igb_driver = {
+ .name = igb_driver_name,
+ .id_table = igb_pci_tbl,
+ .probe = igb_probe,
+ .remove = igb_remove,
+#ifdef CONFIG_PM
+ .driver.pm = &igb_pm_ops,
+#endif
+ .shutdown = igb_shutdown,
+ .sriov_configure = igb_pci_sriov_configure,
+ .err_handler = &igb_err_handler
+};
+
+MODULE_AUTHOR("Intel Corporation, <e1000-devel@lists.sourceforge.net>");
+MODULE_DESCRIPTION("Intel(R) Gigabit Ethernet Network Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK)
+static int debug = -1;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
+
+struct igb_reg_info {
+ u32 ofs;
+ char *name;
+};
+
+static const struct igb_reg_info igb_reg_info_tbl[] = {
+
+ /* General Registers */
+ {E1000_CTRL, "CTRL"},
+ {E1000_STATUS, "STATUS"},
+ {E1000_CTRL_EXT, "CTRL_EXT"},
+
+ /* Interrupt Registers */
+ {E1000_ICR, "ICR"},
+
+ /* RX Registers */
+ {E1000_RCTL, "RCTL"},
+ {E1000_RDLEN(0), "RDLEN"},
+ {E1000_RDH(0), "RDH"},
+ {E1000_RDT(0), "RDT"},
+ {E1000_RXDCTL(0), "RXDCTL"},
+ {E1000_RDBAL(0), "RDBAL"},
+ {E1000_RDBAH(0), "RDBAH"},
+
+ /* TX Registers */
+ {E1000_TCTL, "TCTL"},
+ {E1000_TDBAL(0), "TDBAL"},
+ {E1000_TDBAH(0), "TDBAH"},
+ {E1000_TDLEN(0), "TDLEN"},
+ {E1000_TDH(0), "TDH"},
+ {E1000_TDT(0), "TDT"},
+ {E1000_TXDCTL(0), "TXDCTL"},
+ {E1000_TDFH, "TDFH"},
+ {E1000_TDFT, "TDFT"},
+ {E1000_TDFHS, "TDFHS"},
+ {E1000_TDFPC, "TDFPC"},
+
+ /* List Terminator */
+ {}
+};
+
+/* igb_regdump - register printout routine */
+static void igb_regdump(struct e1000_hw *hw, struct igb_reg_info *reginfo)
+{
+ int n = 0;
+ char rname[16];
+ u32 regs[8];
+
+ switch (reginfo->ofs) {
+ case E1000_RDLEN(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_RDLEN(n));
+ break;
+ case E1000_RDH(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_RDH(n));
+ break;
+ case E1000_RDT(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_RDT(n));
+ break;
+ case E1000_RXDCTL(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_RXDCTL(n));
+ break;
+ case E1000_RDBAL(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_RDBAL(n));
+ break;
+ case E1000_RDBAH(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_RDBAH(n));
+ break;
+ case E1000_TDBAL(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_RDBAL(n));
+ break;
+ case E1000_TDBAH(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_TDBAH(n));
+ break;
+ case E1000_TDLEN(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_TDLEN(n));
+ break;
+ case E1000_TDH(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_TDH(n));
+ break;
+ case E1000_TDT(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_TDT(n));
+ break;
+ case E1000_TXDCTL(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_TXDCTL(n));
+ break;
+ default:
+ pr_info("%-15s %08x\n", reginfo->name, rd32(reginfo->ofs));
+ return;
+ }
+
+ snprintf(rname, 16, "%s%s", reginfo->name, "[0-3]");
+ pr_info("%-15s %08x %08x %08x %08x\n", rname, regs[0], regs[1],
+ regs[2], regs[3]);
+}
+
+/* igb_dump - Print registers, Tx-rings and Rx-rings */
+static void igb_dump(struct igb_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_hw *hw = &adapter->hw;
+ struct igb_reg_info *reginfo;
+ struct igb_ring *tx_ring;
+ union e1000_adv_tx_desc *tx_desc;
+ struct my_u0 { u64 a; u64 b; } *u0;
+ struct igb_ring *rx_ring;
+ union e1000_adv_rx_desc *rx_desc;
+ u32 staterr;
+ u16 i, n;
+
+ if (!netif_msg_hw(adapter))
+ return;
+
+ /* Print netdevice Info */
+ if (netdev) {
+ dev_info(&adapter->pdev->dev, "Net device Info\n");
+ pr_info("Device Name state trans_start last_rx\n");
+ pr_info("%-15s %016lX %016lX %016lX\n", netdev->name,
+ netdev->state, netdev->trans_start, netdev->last_rx);
+ }
+
+ /* Print Registers */
+ dev_info(&adapter->pdev->dev, "Register Dump\n");
+ pr_info(" Register Name Value\n");
+ for (reginfo = (struct igb_reg_info *)igb_reg_info_tbl;
+ reginfo->name; reginfo++) {
+ igb_regdump(hw, reginfo);
+ }
+
+ /* Print TX Ring Summary */
+ if (!netdev || !netif_running(netdev))
+ goto exit;
+
+ dev_info(&adapter->pdev->dev, "TX Rings Summary\n");
+ pr_info("Queue [NTU] [NTC] [bi(ntc)->dma ] leng ntw timestamp\n");
+ for (n = 0; n < adapter->num_tx_queues; n++) {
+ struct igb_tx_buffer *buffer_info;
+ tx_ring = adapter->tx_ring[n];
+ buffer_info = &tx_ring->tx_buffer_info[tx_ring->next_to_clean];
+ pr_info(" %5d %5X %5X %016llX %04X %p %016llX\n",
+ n, tx_ring->next_to_use, tx_ring->next_to_clean,
+ (u64)dma_unmap_addr(buffer_info, dma),
+ dma_unmap_len(buffer_info, len),
+ buffer_info->next_to_watch,
+ (u64)buffer_info->time_stamp);
+ }
+
+ /* Print TX Rings */
+ if (!netif_msg_tx_done(adapter))
+ goto rx_ring_summary;
+
+ dev_info(&adapter->pdev->dev, "TX Rings Dump\n");
+
+ /* Transmit Descriptor Formats
+ *
+ * Advanced Transmit Descriptor
+ * +--------------------------------------------------------------+
+ * 0 | Buffer Address [63:0] |
+ * +--------------------------------------------------------------+
+ * 8 | PAYLEN | PORTS |CC|IDX | STA | DCMD |DTYP|MAC|RSV| DTALEN |
+ * +--------------------------------------------------------------+
+ * 63 46 45 40 39 38 36 35 32 31 24 15 0
+ */
+
+ for (n = 0; n < adapter->num_tx_queues; n++) {
+ tx_ring = adapter->tx_ring[n];
+ pr_info("------------------------------------\n");
+ pr_info("TX QUEUE INDEX = %d\n", tx_ring->queue_index);
+ pr_info("------------------------------------\n");
+ pr_info("T [desc] [address 63:0 ] [PlPOCIStDDM Ln] [bi->dma ] leng ntw timestamp bi->skb\n");
+
+ for (i = 0; tx_ring->desc && (i < tx_ring->count); i++) {
+ const char *next_desc;
+ struct igb_tx_buffer *buffer_info;
+ tx_desc = IGB_TX_DESC(tx_ring, i);
+ buffer_info = &tx_ring->tx_buffer_info[i];
+ u0 = (struct my_u0 *)tx_desc;
+ if (i == tx_ring->next_to_use &&
+ i == tx_ring->next_to_clean)
+ next_desc = " NTC/U";
+ else if (i == tx_ring->next_to_use)
+ next_desc = " NTU";
+ else if (i == tx_ring->next_to_clean)
+ next_desc = " NTC";
+ else
+ next_desc = "";
+
+ pr_info("T [0x%03X] %016llX %016llX %016llX %04X %p %016llX %p%s\n",
+ i, le64_to_cpu(u0->a),
+ le64_to_cpu(u0->b),
+ (u64)dma_unmap_addr(buffer_info, dma),
+ dma_unmap_len(buffer_info, len),
+ buffer_info->next_to_watch,
+ (u64)buffer_info->time_stamp,
+ buffer_info->skb, next_desc);
+
+ if (netif_msg_pktdata(adapter) && buffer_info->skb)
+ print_hex_dump(KERN_INFO, "",
+ DUMP_PREFIX_ADDRESS,
+ 16, 1, buffer_info->skb->data,
+ dma_unmap_len(buffer_info, len),
+ true);
+ }
+ }
+
+ /* Print RX Rings Summary */
+rx_ring_summary:
+ dev_info(&adapter->pdev->dev, "RX Rings Summary\n");
+ pr_info("Queue [NTU] [NTC]\n");
+ for (n = 0; n < adapter->num_rx_queues; n++) {
+ rx_ring = adapter->rx_ring[n];
+ pr_info(" %5d %5X %5X\n",
+ n, rx_ring->next_to_use, rx_ring->next_to_clean);
+ }
+
+ /* Print RX Rings */
+ if (!netif_msg_rx_status(adapter))
+ goto exit;
+
+ dev_info(&adapter->pdev->dev, "RX Rings Dump\n");
+
+ /* Advanced Receive Descriptor (Read) Format
+ * 63 1 0
+ * +-----------------------------------------------------+
+ * 0 | Packet Buffer Address [63:1] |A0/NSE|
+ * +----------------------------------------------+------+
+ * 8 | Header Buffer Address [63:1] | DD |
+ * +-----------------------------------------------------+
+ *
+ *
+ * Advanced Receive Descriptor (Write-Back) Format
+ *
+ * 63 48 47 32 31 30 21 20 17 16 4 3 0
+ * +------------------------------------------------------+
+ * 0 | Packet IP |SPH| HDR_LEN | RSV|Packet| RSS |
+ * | Checksum Ident | | | | Type | Type |
+ * +------------------------------------------------------+
+ * 8 | VLAN Tag | Length | Extended Error | Extended Status |
+ * +------------------------------------------------------+
+ * 63 48 47 32 31 20 19 0
+ */
+
+ for (n = 0; n < adapter->num_rx_queues; n++) {
+ rx_ring = adapter->rx_ring[n];
+ pr_info("------------------------------------\n");
+ pr_info("RX QUEUE INDEX = %d\n", rx_ring->queue_index);
+ pr_info("------------------------------------\n");
+ pr_info("R [desc] [ PktBuf A0] [ HeadBuf DD] [bi->dma ] [bi->skb] <-- Adv Rx Read format\n");
+ pr_info("RWB[desc] [PcsmIpSHl PtRs] [vl er S cks ln] ---------------- [bi->skb] <-- Adv Rx Write-Back format\n");
+
+ for (i = 0; i < rx_ring->count; i++) {
+ const char *next_desc;
+ struct igb_rx_buffer *buffer_info;
+ buffer_info = &rx_ring->rx_buffer_info[i];
+ rx_desc = IGB_RX_DESC(rx_ring, i);
+ u0 = (struct my_u0 *)rx_desc;
+ staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+
+ if (i == rx_ring->next_to_use)
+ next_desc = " NTU";
+ else if (i == rx_ring->next_to_clean)
+ next_desc = " NTC";
+ else
+ next_desc = "";
+
+ if (staterr & E1000_RXD_STAT_DD) {
+ /* Descriptor Done */
+ pr_info("%s[0x%03X] %016llX %016llX ---------------- %s\n",
+ "RWB", i,
+ le64_to_cpu(u0->a),
+ le64_to_cpu(u0->b),
+ next_desc);
+ } else {
+ pr_info("%s[0x%03X] %016llX %016llX %016llX %s\n",
+ "R ", i,
+ le64_to_cpu(u0->a),
+ le64_to_cpu(u0->b),
+ (u64)buffer_info->dma,
+ next_desc);
+
+ if (netif_msg_pktdata(adapter) &&
+ buffer_info->dma && buffer_info->page) {
+ print_hex_dump(KERN_INFO, "",
+ DUMP_PREFIX_ADDRESS,
+ 16, 1,
+ page_address(buffer_info->page) +
+ buffer_info->page_offset,
+ IGB_RX_BUFSZ, true);
+ }
+ }
+ }
+ }
+
+exit:
+ return;
+}
+
+/**
+ * igb_get_i2c_data - Reads the I2C SDA data bit
+ * @hw: pointer to hardware structure
+ * @i2cctl: Current value of I2CCTL register
+ *
+ * Returns the I2C data bit value
+ **/
+static int igb_get_i2c_data(void *data)
+{
+ struct igb_adapter *adapter = (struct igb_adapter *)data;
+ struct e1000_hw *hw = &adapter->hw;
+ s32 i2cctl = rd32(E1000_I2CPARAMS);
+
+ return !!(i2cctl & E1000_I2C_DATA_IN);
+}
+
+/**
+ * igb_set_i2c_data - Sets the I2C data bit
+ * @data: pointer to hardware structure
+ * @state: I2C data value (0 or 1) to set
+ *
+ * Sets the I2C data bit
+ **/
+static void igb_set_i2c_data(void *data, int state)
+{
+ struct igb_adapter *adapter = (struct igb_adapter *)data;
+ struct e1000_hw *hw = &adapter->hw;
+ s32 i2cctl = rd32(E1000_I2CPARAMS);
+
+ if (state)
+ i2cctl |= E1000_I2C_DATA_OUT;
+ else
+ i2cctl &= ~E1000_I2C_DATA_OUT;
+
+ i2cctl &= ~E1000_I2C_DATA_OE_N;
+ i2cctl |= E1000_I2C_CLK_OE_N;
+ wr32(E1000_I2CPARAMS, i2cctl);
+ wrfl();
+
+}
+
+/**
+ * igb_set_i2c_clk - Sets the I2C SCL clock
+ * @data: pointer to hardware structure
+ * @state: state to set clock
+ *
+ * Sets the I2C clock line to state
+ **/
+static void igb_set_i2c_clk(void *data, int state)
+{
+ struct igb_adapter *adapter = (struct igb_adapter *)data;
+ struct e1000_hw *hw = &adapter->hw;
+ s32 i2cctl = rd32(E1000_I2CPARAMS);
+
+ if (state) {
+ i2cctl |= E1000_I2C_CLK_OUT;
+ i2cctl &= ~E1000_I2C_CLK_OE_N;
+ } else {
+ i2cctl &= ~E1000_I2C_CLK_OUT;
+ i2cctl &= ~E1000_I2C_CLK_OE_N;
+ }
+ wr32(E1000_I2CPARAMS, i2cctl);
+ wrfl();
+}
+
+/**
+ * igb_get_i2c_clk - Gets the I2C SCL clock state
+ * @data: pointer to hardware structure
+ *
+ * Gets the I2C clock state
+ **/
+static int igb_get_i2c_clk(void *data)
+{
+ struct igb_adapter *adapter = (struct igb_adapter *)data;
+ struct e1000_hw *hw = &adapter->hw;
+ s32 i2cctl = rd32(E1000_I2CPARAMS);
+
+ return !!(i2cctl & E1000_I2C_CLK_IN);
+}
+
+static const struct i2c_algo_bit_data igb_i2c_algo = {
+ .setsda = igb_set_i2c_data,
+ .setscl = igb_set_i2c_clk,
+ .getsda = igb_get_i2c_data,
+ .getscl = igb_get_i2c_clk,
+ .udelay = 5,
+ .timeout = 20,
+};
+
+/**
+ * igb_get_hw_dev - return device
+ * @hw: pointer to hardware structure
+ *
+ * used by hardware layer to print debugging information
+ **/
+struct net_device *igb_get_hw_dev(struct e1000_hw *hw)
+{
+ struct igb_adapter *adapter = hw->back;
+ return adapter->netdev;
+}
+
+/**
+ * igb_init_module - Driver Registration Routine
+ *
+ * igb_init_module is the first routine called when the driver is
+ * loaded. All it does is register with the PCI subsystem.
+ **/
+static int __init igb_init_module(void)
+{
+ int ret;
+
+ pr_info("%s - version %s\n",
+ igb_driver_string, igb_driver_version);
+ pr_info("%s\n", igb_copyright);
+
+#ifdef CONFIG_IGB_DCA
+ dca_register_notify(&dca_notifier);
+#endif
+ ret = pci_register_driver(&igb_driver);
+ return ret;
+}
+
+module_init(igb_init_module);
+
+/**
+ * igb_exit_module - Driver Exit Cleanup Routine
+ *
+ * igb_exit_module is called just before the driver is removed
+ * from memory.
+ **/
+static void __exit igb_exit_module(void)
+{
+#ifdef CONFIG_IGB_DCA
+ dca_unregister_notify(&dca_notifier);
+#endif
+ pci_unregister_driver(&igb_driver);
+}
+
+module_exit(igb_exit_module);
+
+#define Q_IDX_82576(i) (((i & 0x1) << 3) + (i >> 1))
+/**
+ * igb_cache_ring_register - Descriptor ring to register mapping
+ * @adapter: board private structure to initialize
+ *
+ * Once we know the feature-set enabled for the device, we'll cache
+ * the register offset the descriptor ring is assigned to.
+ **/
+static void igb_cache_ring_register(struct igb_adapter *adapter)
+{
+ int i = 0, j = 0;
+ u32 rbase_offset = adapter->vfs_allocated_count;
+
+ switch (adapter->hw.mac.type) {
+ case e1000_82576:
+ /* The queues are allocated for virtualization such that VF 0
+ * is allocated queues 0 and 8, VF 1 queues 1 and 9, etc.
+ * In order to avoid collision we start at the first free queue
+ * and continue consuming queues in the same sequence
+ */
+ if (adapter->vfs_allocated_count) {
+ for (; i < adapter->rss_queues; i++)
+ adapter->rx_ring[i]->reg_idx = rbase_offset +
+ Q_IDX_82576(i);
+ }
+ /* Fall through */
+ case e1000_82575:
+ case e1000_82580:
+ case e1000_i350:
+ case e1000_i354:
+ case e1000_i210:
+ case e1000_i211:
+ /* Fall through */
+ default:
+ for (; i < adapter->num_rx_queues; i++)
+ adapter->rx_ring[i]->reg_idx = rbase_offset + i;
+ for (; j < adapter->num_tx_queues; j++)
+ adapter->tx_ring[j]->reg_idx = rbase_offset + j;
+ break;
+ }
+}
+
+u32 igb_rd32(struct e1000_hw *hw, u32 reg)
+{
+ struct igb_adapter *igb = container_of(hw, struct igb_adapter, hw);
+ u8 __iomem *hw_addr = ACCESS_ONCE(hw->hw_addr);
+ u32 value = 0;
+
+ if (E1000_REMOVED(hw_addr))
+ return ~value;
+
+ value = readl(&hw_addr[reg]);
+
+ /* reads should not return all F's */
+ if (!(~value) && (!reg || !(~readl(hw_addr)))) {
+ struct net_device *netdev = igb->netdev;
+ hw->hw_addr = NULL;
+ netif_device_detach(netdev);
+ netdev_err(netdev, "PCIe link lost, device now detached\n");
+ }
+
+ return value;
+}
+
+/**
+ * igb_write_ivar - configure ivar for given MSI-X vector
+ * @hw: pointer to the HW structure
+ * @msix_vector: vector number we are allocating to a given ring
+ * @index: row index of IVAR register to write within IVAR table
+ * @offset: column offset of in IVAR, should be multiple of 8
+ *
+ * This function is intended to handle the writing of the IVAR register
+ * for adapters 82576 and newer. The IVAR table consists of 2 columns,
+ * each containing an cause allocation for an Rx and Tx ring, and a
+ * variable number of rows depending on the number of queues supported.
+ **/
+static void igb_write_ivar(struct e1000_hw *hw, int msix_vector,
+ int index, int offset)
+{
+ u32 ivar = array_rd32(E1000_IVAR0, index);
+
+ /* clear any bits that are currently set */
+ ivar &= ~((u32)0xFF << offset);
+
+ /* write vector and valid bit */
+ ivar |= (msix_vector | E1000_IVAR_VALID) << offset;
+
+ array_wr32(E1000_IVAR0, index, ivar);
+}
+
+#define IGB_N0_QUEUE -1
+static void igb_assign_vector(struct igb_q_vector *q_vector, int msix_vector)
+{
+ struct igb_adapter *adapter = q_vector->adapter;
+ struct e1000_hw *hw = &adapter->hw;
+ int rx_queue = IGB_N0_QUEUE;
+ int tx_queue = IGB_N0_QUEUE;
+ u32 msixbm = 0;
+
+ if (q_vector->rx.ring)
+ rx_queue = q_vector->rx.ring->reg_idx;
+ if (q_vector->tx.ring)
+ tx_queue = q_vector->tx.ring->reg_idx;
+
+ switch (hw->mac.type) {
+ case e1000_82575:
+ /* The 82575 assigns vectors using a bitmask, which matches the
+ * bitmask for the EICR/EIMS/EIMC registers. To assign one
+ * or more queues to a vector, we write the appropriate bits
+ * into the MSIXBM register for that vector.
+ */
+ if (rx_queue > IGB_N0_QUEUE)
+ msixbm = E1000_EICR_RX_QUEUE0 << rx_queue;
+ if (tx_queue > IGB_N0_QUEUE)
+ msixbm |= E1000_EICR_TX_QUEUE0 << tx_queue;
+ if (!(adapter->flags & IGB_FLAG_HAS_MSIX) && msix_vector == 0)
+ msixbm |= E1000_EIMS_OTHER;
+ array_wr32(E1000_MSIXBM(0), msix_vector, msixbm);
+ q_vector->eims_value = msixbm;
+ break;
+ case e1000_82576:
+ /* 82576 uses a table that essentially consists of 2 columns
+ * with 8 rows. The ordering is column-major so we use the
+ * lower 3 bits as the row index, and the 4th bit as the
+ * column offset.
+ */
+ if (rx_queue > IGB_N0_QUEUE)
+ igb_write_ivar(hw, msix_vector,
+ rx_queue & 0x7,
+ (rx_queue & 0x8) << 1);
+ if (tx_queue > IGB_N0_QUEUE)
+ igb_write_ivar(hw, msix_vector,
+ tx_queue & 0x7,
+ ((tx_queue & 0x8) << 1) + 8);
+ q_vector->eims_value = 1 << msix_vector;
+ break;
+ case e1000_82580:
+ case e1000_i350:
+ case e1000_i354:
+ case e1000_i210:
+ case e1000_i211:
+ /* On 82580 and newer adapters the scheme is similar to 82576
+ * however instead of ordering column-major we have things
+ * ordered row-major. So we traverse the table by using
+ * bit 0 as the column offset, and the remaining bits as the
+ * row index.
+ */
+ if (rx_queue > IGB_N0_QUEUE)
+ igb_write_ivar(hw, msix_vector,
+ rx_queue >> 1,
+ (rx_queue & 0x1) << 4);
+ if (tx_queue > IGB_N0_QUEUE)
+ igb_write_ivar(hw, msix_vector,
+ tx_queue >> 1,
+ ((tx_queue & 0x1) << 4) + 8);
+ q_vector->eims_value = 1 << msix_vector;
+ break;
+ default:
+ BUG();
+ break;
+ }
+
+ /* add q_vector eims value to global eims_enable_mask */
+ adapter->eims_enable_mask |= q_vector->eims_value;
+
+ /* configure q_vector to set itr on first interrupt */
+ q_vector->set_itr = 1;
+}
+
+/**
+ * igb_configure_msix - Configure MSI-X hardware
+ * @adapter: board private structure to initialize
+ *
+ * igb_configure_msix sets up the hardware to properly
+ * generate MSI-X interrupts.
+ **/
+static void igb_configure_msix(struct igb_adapter *adapter)
+{
+ u32 tmp;
+ int i, vector = 0;
+ struct e1000_hw *hw = &adapter->hw;
+
+ adapter->eims_enable_mask = 0;
+
+ /* set vector for other causes, i.e. link changes */
+ switch (hw->mac.type) {
+ case e1000_82575:
+ tmp = rd32(E1000_CTRL_EXT);
+ /* enable MSI-X PBA support*/
+ tmp |= E1000_CTRL_EXT_PBA_CLR;
+
+ /* Auto-Mask interrupts upon ICR read. */
+ tmp |= E1000_CTRL_EXT_EIAME;
+ tmp |= E1000_CTRL_EXT_IRCA;
+
+ wr32(E1000_CTRL_EXT, tmp);
+
+ /* enable msix_other interrupt */
+ array_wr32(E1000_MSIXBM(0), vector++, E1000_EIMS_OTHER);
+ adapter->eims_other = E1000_EIMS_OTHER;
+
+ break;
+
+ case e1000_82576:
+ case e1000_82580:
+ case e1000_i350:
+ case e1000_i354:
+ case e1000_i210:
+ case e1000_i211:
+ /* Turn on MSI-X capability first, or our settings
+ * won't stick. And it will take days to debug.
+ */
+ wr32(E1000_GPIE, E1000_GPIE_MSIX_MODE |
+ E1000_GPIE_PBA | E1000_GPIE_EIAME |
+ E1000_GPIE_NSICR);
+
+ /* enable msix_other interrupt */
+ adapter->eims_other = 1 << vector;
+ tmp = (vector++ | E1000_IVAR_VALID) << 8;
+
+ wr32(E1000_IVAR_MISC, tmp);
+ break;
+ default:
+ /* do nothing, since nothing else supports MSI-X */
+ break;
+ } /* switch (hw->mac.type) */
+
+ adapter->eims_enable_mask |= adapter->eims_other;
+
+ for (i = 0; i < adapter->num_q_vectors; i++)
+ igb_assign_vector(adapter->q_vector[i], vector++);
+
+ wrfl();
+}
+
+/**
+ * igb_request_msix - Initialize MSI-X interrupts
+ * @adapter: board private structure to initialize
+ *
+ * igb_request_msix allocates MSI-X vectors and requests interrupts from the
+ * kernel.
+ **/
+static int igb_request_msix(struct igb_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_hw *hw = &adapter->hw;
+ int i, err = 0, vector = 0, free_vector = 0;
+
+ err = request_irq(adapter->msix_entries[vector].vector,
+ igb_msix_other, 0, netdev->name, adapter);
+ if (err)
+ goto err_out;
+
+ for (i = 0; i < adapter->num_q_vectors; i++) {
+ struct igb_q_vector *q_vector = adapter->q_vector[i];
+
+ vector++;
+
+ q_vector->itr_register = hw->hw_addr + E1000_EITR(vector);
+
+ if (q_vector->rx.ring && q_vector->tx.ring)
+ sprintf(q_vector->name, "%s-TxRx-%u", netdev->name,
+ q_vector->rx.ring->queue_index);
+ else if (q_vector->tx.ring)
+ sprintf(q_vector->name, "%s-tx-%u", netdev->name,
+ q_vector->tx.ring->queue_index);
+ else if (q_vector->rx.ring)
+ sprintf(q_vector->name, "%s-rx-%u", netdev->name,
+ q_vector->rx.ring->queue_index);
+ else
+ sprintf(q_vector->name, "%s-unused", netdev->name);
+
+ err = request_irq(adapter->msix_entries[vector].vector,
+ igb_msix_ring, 0, q_vector->name,
+ q_vector);
+ if (err)
+ goto err_free;
+ }
+
+ igb_configure_msix(adapter);
+ return 0;
+
+err_free:
+ /* free already assigned IRQs */
+ free_irq(adapter->msix_entries[free_vector++].vector, adapter);
+
+ vector--;
+ for (i = 0; i < vector; i++) {
+ free_irq(adapter->msix_entries[free_vector++].vector,
+ adapter->q_vector[i]);
+ }
+err_out:
+ return err;
+}
+
+/**
+ * igb_free_q_vector - Free memory allocated for specific interrupt vector
+ * @adapter: board private structure to initialize
+ * @v_idx: Index of vector to be freed
+ *
+ * This function frees the memory allocated to the q_vector.
+ **/
+static void igb_free_q_vector(struct igb_adapter *adapter, int v_idx)
+{
+ struct igb_q_vector *q_vector = adapter->q_vector[v_idx];
+
+ adapter->q_vector[v_idx] = NULL;
+
+ /* igb_get_stats64() might access the rings on this vector,
+ * we must wait a grace period before freeing it.
+ */
+ if (q_vector)
+ kfree_rcu(q_vector, rcu);
+}
+
+/**
+ * igb_reset_q_vector - Reset config for interrupt vector
+ * @adapter: board private structure to initialize
+ * @v_idx: Index of vector to be reset
+ *
+ * If NAPI is enabled it will delete any references to the
+ * NAPI struct. This is preparation for igb_free_q_vector.
+ **/
+static void igb_reset_q_vector(struct igb_adapter *adapter, int v_idx)
+{
+ struct igb_q_vector *q_vector = adapter->q_vector[v_idx];
+
+ /* Coming from igb_set_interrupt_capability, the vectors are not yet
+ * allocated. So, q_vector is NULL so we should stop here.
+ */
+ if (!q_vector)
+ return;
+
+ if (q_vector->tx.ring)
+ adapter->tx_ring[q_vector->tx.ring->queue_index] = NULL;
+
+ if (q_vector->rx.ring)
+ adapter->rx_ring[q_vector->rx.ring->queue_index] = NULL;
+
+ netif_napi_del(&q_vector->napi);
+
+}
+
+static void igb_reset_interrupt_capability(struct igb_adapter *adapter)
+{
+ int v_idx = adapter->num_q_vectors;
+
+ if (adapter->flags & IGB_FLAG_HAS_MSIX)
+ pci_disable_msix(adapter->pdev);
+ else if (adapter->flags & IGB_FLAG_HAS_MSI)
+ pci_disable_msi(adapter->pdev);
+
+ while (v_idx--)
+ igb_reset_q_vector(adapter, v_idx);
+}
+
+/**
+ * igb_free_q_vectors - Free memory allocated for interrupt vectors
+ * @adapter: board private structure to initialize
+ *
+ * This function frees the memory allocated to the q_vectors. In addition if
+ * NAPI is enabled it will delete any references to the NAPI struct prior
+ * to freeing the q_vector.
+ **/
+static void igb_free_q_vectors(struct igb_adapter *adapter)
+{
+ int v_idx = adapter->num_q_vectors;
+
+ adapter->num_tx_queues = 0;
+ adapter->num_rx_queues = 0;
+ adapter->num_q_vectors = 0;
+
+ while (v_idx--) {
+ igb_reset_q_vector(adapter, v_idx);
+ igb_free_q_vector(adapter, v_idx);
+ }
+}
+
+/**
+ * igb_clear_interrupt_scheme - reset the device to a state of no interrupts
+ * @adapter: board private structure to initialize
+ *
+ * This function resets the device so that it has 0 Rx queues, Tx queues, and
+ * MSI-X interrupts allocated.
+ */
+static void igb_clear_interrupt_scheme(struct igb_adapter *adapter)
+{
+ igb_free_q_vectors(adapter);
+ igb_reset_interrupt_capability(adapter);
+}
+
+/**
+ * igb_set_interrupt_capability - set MSI or MSI-X if supported
+ * @adapter: board private structure to initialize
+ * @msix: boolean value of MSIX capability
+ *
+ * Attempt to configure interrupts using the best available
+ * capabilities of the hardware and kernel.
+ **/
+static void igb_set_interrupt_capability(struct igb_adapter *adapter, bool msix)
+{
+ int err;
+ int numvecs, i;
+
+ if (!msix)
+ goto msi_only;
+ adapter->flags |= IGB_FLAG_HAS_MSIX;
+
+ /* Number of supported queues. */
+ adapter->num_rx_queues = adapter->rss_queues;
+ if (adapter->vfs_allocated_count)
+ adapter->num_tx_queues = 1;
+ else
+ adapter->num_tx_queues = adapter->rss_queues;
+
+ /* start with one vector for every Rx queue */
+ numvecs = adapter->num_rx_queues;
+
+ /* if Tx handler is separate add 1 for every Tx queue */
+ if (!(adapter->flags & IGB_FLAG_QUEUE_PAIRS))
+ numvecs += adapter->num_tx_queues;
+
+ /* store the number of vectors reserved for queues */
+ adapter->num_q_vectors = numvecs;
+
+ /* add 1 vector for link status interrupts */
+ numvecs++;
+ for (i = 0; i < numvecs; i++)
+ adapter->msix_entries[i].entry = i;
+
+ err = pci_enable_msix_range(adapter->pdev,
+ adapter->msix_entries,
+ numvecs,
+ numvecs);
+ if (err > 0)
+ return;
+
+ igb_reset_interrupt_capability(adapter);
+
+ /* If we can't do MSI-X, try MSI */
+msi_only:
+ adapter->flags &= ~IGB_FLAG_HAS_MSIX;
+#ifdef CONFIG_PCI_IOV
+ /* disable SR-IOV for non MSI-X configurations */
+ if (adapter->vf_data) {
+ struct e1000_hw *hw = &adapter->hw;
+ /* disable iov and allow time for transactions to clear */
+ pci_disable_sriov(adapter->pdev);
+ msleep(500);
+
+ kfree(adapter->vf_data);
+ adapter->vf_data = NULL;
+ wr32(E1000_IOVCTL, E1000_IOVCTL_REUSE_VFQ);
+ wrfl();
+ msleep(100);
+ dev_info(&adapter->pdev->dev, "IOV Disabled\n");
+ }
+#endif
+ adapter->vfs_allocated_count = 0;
+ adapter->rss_queues = 1;
+ adapter->flags |= IGB_FLAG_QUEUE_PAIRS;
+ adapter->num_rx_queues = 1;
+ adapter->num_tx_queues = 1;
+ adapter->num_q_vectors = 1;
+ if (!pci_enable_msi(adapter->pdev))
+ adapter->flags |= IGB_FLAG_HAS_MSI;
+}
+
+static void igb_add_ring(struct igb_ring *ring,
+ struct igb_ring_container *head)
+{
+ head->ring = ring;
+ head->count++;
+}
+
+/**
+ * igb_alloc_q_vector - Allocate memory for a single interrupt vector
+ * @adapter: board private structure to initialize
+ * @v_count: q_vectors allocated on adapter, used for ring interleaving
+ * @v_idx: index of vector in adapter struct
+ * @txr_count: total number of Tx rings to allocate
+ * @txr_idx: index of first Tx ring to allocate
+ * @rxr_count: total number of Rx rings to allocate
+ * @rxr_idx: index of first Rx ring to allocate
+ *
+ * We allocate one q_vector. If allocation fails we return -ENOMEM.
+ **/
+static int igb_alloc_q_vector(struct igb_adapter *adapter,
+ int v_count, int v_idx,
+ int txr_count, int txr_idx,
+ int rxr_count, int rxr_idx)
+{
+ struct igb_q_vector *q_vector;
+ struct igb_ring *ring;
+ int ring_count, size;
+
+ /* igb only supports 1 Tx and/or 1 Rx queue per vector */
+ if (txr_count > 1 || rxr_count > 1)
+ return -ENOMEM;
+
+ ring_count = txr_count + rxr_count;
+ size = sizeof(struct igb_q_vector) +
+ (sizeof(struct igb_ring) * ring_count);
+
+ /* allocate q_vector and rings */
+ q_vector = adapter->q_vector[v_idx];
+ if (!q_vector)
+ q_vector = kzalloc(size, GFP_KERNEL);
+ else
+ memset(q_vector, 0, size);
+ if (!q_vector)
+ return -ENOMEM;
+
+ /* initialize NAPI */
+ netif_napi_add(adapter->netdev, &q_vector->napi,
+ igb_poll, 64);
+
+ /* tie q_vector and adapter together */
+ adapter->q_vector[v_idx] = q_vector;
+ q_vector->adapter = adapter;
+
+ /* initialize work limits */
+ q_vector->tx.work_limit = adapter->tx_work_limit;
+
+ /* initialize ITR configuration */
+ q_vector->itr_register = adapter->hw.hw_addr + E1000_EITR(0);
+ q_vector->itr_val = IGB_START_ITR;
+
+ /* initialize pointer to rings */
+ ring = q_vector->ring;
+
+ /* intialize ITR */
+ if (rxr_count) {
+ /* rx or rx/tx vector */
+ if (!adapter->rx_itr_setting || adapter->rx_itr_setting > 3)
+ q_vector->itr_val = adapter->rx_itr_setting;
+ } else {
+ /* tx only vector */
+ if (!adapter->tx_itr_setting || adapter->tx_itr_setting > 3)
+ q_vector->itr_val = adapter->tx_itr_setting;
+ }
+
+ if (txr_count) {
+ /* assign generic ring traits */
+ ring->dev = &adapter->pdev->dev;
+ ring->netdev = adapter->netdev;
+
+ /* configure backlink on ring */
+ ring->q_vector = q_vector;
+
+ /* update q_vector Tx values */
+ igb_add_ring(ring, &q_vector->tx);
+
+ /* For 82575, context index must be unique per ring. */
+ if (adapter->hw.mac.type == e1000_82575)
+ set_bit(IGB_RING_FLAG_TX_CTX_IDX, &ring->flags);
+
+ /* apply Tx specific ring traits */
+ ring->count = adapter->tx_ring_count;
+ ring->queue_index = txr_idx;
+
+ u64_stats_init(&ring->tx_syncp);
+ u64_stats_init(&ring->tx_syncp2);
+
+ /* assign ring to adapter */
+ adapter->tx_ring[txr_idx] = ring;
+
+ /* push pointer to next ring */
+ ring++;
+ }
+
+ if (rxr_count) {
+ /* assign generic ring traits */
+ ring->dev = &adapter->pdev->dev;
+ ring->netdev = adapter->netdev;
+
+ /* configure backlink on ring */
+ ring->q_vector = q_vector;
+
+ /* update q_vector Rx values */
+ igb_add_ring(ring, &q_vector->rx);
+
+ /* set flag indicating ring supports SCTP checksum offload */
+ if (adapter->hw.mac.type >= e1000_82576)
+ set_bit(IGB_RING_FLAG_RX_SCTP_CSUM, &ring->flags);
+
+ /* On i350, i354, i210, and i211, loopback VLAN packets
+ * have the tag byte-swapped.
+ */
+ if (adapter->hw.mac.type >= e1000_i350)
+ set_bit(IGB_RING_FLAG_RX_LB_VLAN_BSWAP, &ring->flags);
+
+ /* apply Rx specific ring traits */
+ ring->count = adapter->rx_ring_count;
+ ring->queue_index = rxr_idx;
+
+ u64_stats_init(&ring->rx_syncp);
+
+ /* assign ring to adapter */
+ adapter->rx_ring[rxr_idx] = ring;
+ }
+
+ return 0;
+}
+
+
+/**
+ * igb_alloc_q_vectors - Allocate memory for interrupt vectors
+ * @adapter: board private structure to initialize
+ *
+ * We allocate one q_vector per queue interrupt. If allocation fails we
+ * return -ENOMEM.
+ **/
+static int igb_alloc_q_vectors(struct igb_adapter *adapter)
+{
+ int q_vectors = adapter->num_q_vectors;
+ int rxr_remaining = adapter->num_rx_queues;
+ int txr_remaining = adapter->num_tx_queues;
+ int rxr_idx = 0, txr_idx = 0, v_idx = 0;
+ int err;
+
+ if (q_vectors >= (rxr_remaining + txr_remaining)) {
+ for (; rxr_remaining; v_idx++) {
+ err = igb_alloc_q_vector(adapter, q_vectors, v_idx,
+ 0, 0, 1, rxr_idx);
+
+ if (err)
+ goto err_out;
+
+ /* update counts and index */
+ rxr_remaining--;
+ rxr_idx++;
+ }
+ }
+
+ for (; v_idx < q_vectors; v_idx++) {
+ int rqpv = DIV_ROUND_UP(rxr_remaining, q_vectors - v_idx);
+ int tqpv = DIV_ROUND_UP(txr_remaining, q_vectors - v_idx);
+
+ err = igb_alloc_q_vector(adapter, q_vectors, v_idx,
+ tqpv, txr_idx, rqpv, rxr_idx);
+
+ if (err)
+ goto err_out;
+
+ /* update counts and index */
+ rxr_remaining -= rqpv;
+ txr_remaining -= tqpv;
+ rxr_idx++;
+ txr_idx++;
+ }
+
+ return 0;
+
+err_out:
+ adapter->num_tx_queues = 0;
+ adapter->num_rx_queues = 0;
+ adapter->num_q_vectors = 0;
+
+ while (v_idx--)
+ igb_free_q_vector(adapter, v_idx);
+
+ return -ENOMEM;
+}
+
+/**
+ * igb_init_interrupt_scheme - initialize interrupts, allocate queues/vectors
+ * @adapter: board private structure to initialize
+ * @msix: boolean value of MSIX capability
+ *
+ * This function initializes the interrupts and allocates all of the queues.
+ **/
+static int igb_init_interrupt_scheme(struct igb_adapter *adapter, bool msix)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ int err;
+
+ igb_set_interrupt_capability(adapter, msix);
+
+ err = igb_alloc_q_vectors(adapter);
+ if (err) {
+ dev_err(&pdev->dev, "Unable to allocate memory for vectors\n");
+ goto err_alloc_q_vectors;
+ }
+
+ igb_cache_ring_register(adapter);
+
+ return 0;
+
+err_alloc_q_vectors:
+ igb_reset_interrupt_capability(adapter);
+ return err;
+}
+
+/**
+ * igb_request_irq - initialize interrupts
+ * @adapter: board private structure to initialize
+ *
+ * Attempts to configure interrupts using the best available
+ * capabilities of the hardware and kernel.
+ **/
+static int igb_request_irq(struct igb_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ int err = 0;
+
+ if (adapter->flags & IGB_FLAG_HAS_MSIX) {
+ err = igb_request_msix(adapter);
+ if (!err)
+ goto request_done;
+ /* fall back to MSI */
+ igb_free_all_tx_resources(adapter);
+ igb_free_all_rx_resources(adapter);
+
+ igb_clear_interrupt_scheme(adapter);
+ err = igb_init_interrupt_scheme(adapter, false);
+ if (err)
+ goto request_done;
+
+ igb_setup_all_tx_resources(adapter);
+ igb_setup_all_rx_resources(adapter);
+ igb_configure(adapter);
+ }
+
+ igb_assign_vector(adapter->q_vector[0], 0);
+
+ if (adapter->flags & IGB_FLAG_HAS_MSI) {
+ err = request_irq(pdev->irq, igb_intr_msi, 0,
+ netdev->name, adapter);
+ if (!err)
+ goto request_done;
+
+ /* fall back to legacy interrupts */
+ igb_reset_interrupt_capability(adapter);
+ adapter->flags &= ~IGB_FLAG_HAS_MSI;
+ }
+
+ err = request_irq(pdev->irq, igb_intr, IRQF_SHARED,
+ netdev->name, adapter);
+
+ if (err)
+ dev_err(&pdev->dev, "Error %d getting interrupt\n",
+ err);
+
+request_done:
+ return err;
+}
+
+static void igb_free_irq(struct igb_adapter *adapter)
+{
+ if (adapter->flags & IGB_FLAG_HAS_MSIX) {
+ int vector = 0, i;
+
+ free_irq(adapter->msix_entries[vector++].vector, adapter);
+
+ for (i = 0; i < adapter->num_q_vectors; i++)
+ free_irq(adapter->msix_entries[vector++].vector,
+ adapter->q_vector[i]);
+ } else {
+ free_irq(adapter->pdev->irq, adapter);
+ }
+}
+
+/**
+ * igb_irq_disable - Mask off interrupt generation on the NIC
+ * @adapter: board private structure
+ **/
+static void igb_irq_disable(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* we need to be careful when disabling interrupts. The VFs are also
+ * mapped into these registers and so clearing the bits can cause
+ * issues on the VF drivers so we only need to clear what we set
+ */
+ if (adapter->flags & IGB_FLAG_HAS_MSIX) {
+ u32 regval = rd32(E1000_EIAM);
+
+ wr32(E1000_EIAM, regval & ~adapter->eims_enable_mask);
+ wr32(E1000_EIMC, adapter->eims_enable_mask);
+ regval = rd32(E1000_EIAC);
+ wr32(E1000_EIAC, regval & ~adapter->eims_enable_mask);
+ }
+
+ wr32(E1000_IAM, 0);
+ wr32(E1000_IMC, ~0);
+ wrfl();
+ if (adapter->flags & IGB_FLAG_HAS_MSIX) {
+ int i;
+
+ for (i = 0; i < adapter->num_q_vectors; i++)
+ synchronize_irq(adapter->msix_entries[i].vector);
+ } else {
+ synchronize_irq(adapter->pdev->irq);
+ }
+}
+
+/**
+ * igb_irq_enable - Enable default interrupt generation settings
+ * @adapter: board private structure
+ **/
+static void igb_irq_enable(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (adapter->flags & IGB_FLAG_HAS_MSIX) {
+ u32 ims = E1000_IMS_LSC | E1000_IMS_DOUTSYNC | E1000_IMS_DRSTA;
+ u32 regval = rd32(E1000_EIAC);
+
+ wr32(E1000_EIAC, regval | adapter->eims_enable_mask);
+ regval = rd32(E1000_EIAM);
+ wr32(E1000_EIAM, regval | adapter->eims_enable_mask);
+ wr32(E1000_EIMS, adapter->eims_enable_mask);
+ if (adapter->vfs_allocated_count) {
+ wr32(E1000_MBVFIMR, 0xFF);
+ ims |= E1000_IMS_VMMB;
+ }
+ wr32(E1000_IMS, ims);
+ } else {
+ wr32(E1000_IMS, IMS_ENABLE_MASK |
+ E1000_IMS_DRSTA);
+ wr32(E1000_IAM, IMS_ENABLE_MASK |
+ E1000_IMS_DRSTA);
+ }
+}
+
+static void igb_update_mng_vlan(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 vid = adapter->hw.mng_cookie.vlan_id;
+ u16 old_vid = adapter->mng_vlan_id;
+
+ if (hw->mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN) {
+ /* add VID to filter table */
+ igb_vfta_set(hw, vid, true);
+ adapter->mng_vlan_id = vid;
+ } else {
+ adapter->mng_vlan_id = IGB_MNG_VLAN_NONE;
+ }
+
+ if ((old_vid != (u16)IGB_MNG_VLAN_NONE) &&
+ (vid != old_vid) &&
+ !test_bit(old_vid, adapter->active_vlans)) {
+ /* remove VID from filter table */
+ igb_vfta_set(hw, old_vid, false);
+ }
+}
+
+/**
+ * igb_release_hw_control - release control of the h/w to f/w
+ * @adapter: address of board private structure
+ *
+ * igb_release_hw_control resets CTRL_EXT:DRV_LOAD bit.
+ * For ASF and Pass Through versions of f/w this means that the
+ * driver is no longer loaded.
+ **/
+static void igb_release_hw_control(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl_ext;
+
+ /* Let firmware take over control of h/w */
+ ctrl_ext = rd32(E1000_CTRL_EXT);
+ wr32(E1000_CTRL_EXT,
+ ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
+}
+
+/**
+ * igb_get_hw_control - get control of the h/w from f/w
+ * @adapter: address of board private structure
+ *
+ * igb_get_hw_control sets CTRL_EXT:DRV_LOAD bit.
+ * For ASF and Pass Through versions of f/w this means that
+ * the driver is loaded.
+ **/
+static void igb_get_hw_control(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl_ext;
+
+ /* Let firmware know the driver has taken over */
+ ctrl_ext = rd32(E1000_CTRL_EXT);
+ wr32(E1000_CTRL_EXT,
+ ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
+}
+
+/**
+ * igb_configure - configure the hardware for RX and TX
+ * @adapter: private board structure
+ **/
+static void igb_configure(struct igb_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ int i;
+
+ igb_get_hw_control(adapter);
+ igb_set_rx_mode(netdev);
+
+ igb_restore_vlan(adapter);
+
+ igb_setup_tctl(adapter);
+ igb_setup_mrqc(adapter);
+ igb_setup_rctl(adapter);
+
+ igb_configure_tx(adapter);
+ igb_configure_rx(adapter);
+
+ igb_rx_fifo_flush_82575(&adapter->hw);
+
+ /* call igb_desc_unused which always leaves
+ * at least 1 descriptor unused to make sure
+ * next_to_use != next_to_clean
+ */
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ struct igb_ring *ring = adapter->rx_ring[i];
+ igb_alloc_rx_buffers(ring, igb_desc_unused(ring));
+ }
+}
+
+/**
+ * igb_power_up_link - Power up the phy/serdes link
+ * @adapter: address of board private structure
+ **/
+void igb_power_up_link(struct igb_adapter *adapter)
+{
+ igb_reset_phy(&adapter->hw);
+
+ if (adapter->hw.phy.media_type == e1000_media_type_copper)
+ igb_power_up_phy_copper(&adapter->hw);
+ else
+ igb_power_up_serdes_link_82575(&adapter->hw);
+
+ igb_setup_link(&adapter->hw);
+}
+
+/**
+ * igb_power_down_link - Power down the phy/serdes link
+ * @adapter: address of board private structure
+ */
+static void igb_power_down_link(struct igb_adapter *adapter)
+{
+ if (adapter->hw.phy.media_type == e1000_media_type_copper)
+ igb_power_down_phy_copper_82575(&adapter->hw);
+ else
+ igb_shutdown_serdes_link_82575(&adapter->hw);
+}
+
+/**
+ * Detect and switch function for Media Auto Sense
+ * @adapter: address of the board private structure
+ **/
+static void igb_check_swap_media(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl_ext, connsw;
+ bool swap_now = false;
+
+ ctrl_ext = rd32(E1000_CTRL_EXT);
+ connsw = rd32(E1000_CONNSW);
+
+ /* need to live swap if current media is copper and we have fiber/serdes
+ * to go to.
+ */
+
+ if ((hw->phy.media_type == e1000_media_type_copper) &&
+ (!(connsw & E1000_CONNSW_AUTOSENSE_EN))) {
+ swap_now = true;
+ } else if (!(connsw & E1000_CONNSW_SERDESD)) {
+ /* copper signal takes time to appear */
+ if (adapter->copper_tries < 4) {
+ adapter->copper_tries++;
+ connsw |= E1000_CONNSW_AUTOSENSE_CONF;
+ wr32(E1000_CONNSW, connsw);
+ return;
+ } else {
+ adapter->copper_tries = 0;
+ if ((connsw & E1000_CONNSW_PHYSD) &&
+ (!(connsw & E1000_CONNSW_PHY_PDN))) {
+ swap_now = true;
+ connsw &= ~E1000_CONNSW_AUTOSENSE_CONF;
+ wr32(E1000_CONNSW, connsw);
+ }
+ }
+ }
+
+ if (!swap_now)
+ return;
+
+ switch (hw->phy.media_type) {
+ case e1000_media_type_copper:
+ netdev_info(adapter->netdev,
+ "MAS: changing media to fiber/serdes\n");
+ ctrl_ext |=
+ E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES;
+ adapter->flags |= IGB_FLAG_MEDIA_RESET;
+ adapter->copper_tries = 0;
+ break;
+ case e1000_media_type_internal_serdes:
+ case e1000_media_type_fiber:
+ netdev_info(adapter->netdev,
+ "MAS: changing media to copper\n");
+ ctrl_ext &=
+ ~E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES;
+ adapter->flags |= IGB_FLAG_MEDIA_RESET;
+ break;
+ default:
+ /* shouldn't get here during regular operation */
+ netdev_err(adapter->netdev,
+ "AMS: Invalid media type found, returning\n");
+ break;
+ }
+ wr32(E1000_CTRL_EXT, ctrl_ext);
+}
+
+/**
+ * igb_up - Open the interface and prepare it to handle traffic
+ * @adapter: board private structure
+ **/
+int igb_up(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ int i;
+
+ /* hardware has been reset, we need to reload some things */
+ igb_configure(adapter);
+
+ clear_bit(__IGB_DOWN, &adapter->state);
+
+ for (i = 0; i < adapter->num_q_vectors; i++)
+ napi_enable(&(adapter->q_vector[i]->napi));
+
+ if (adapter->flags & IGB_FLAG_HAS_MSIX)
+ igb_configure_msix(adapter);
+ else
+ igb_assign_vector(adapter->q_vector[0], 0);
+
+ /* Clear any pending interrupts. */
+ rd32(E1000_ICR);
+ igb_irq_enable(adapter);
+
+ /* notify VFs that reset has been completed */
+ if (adapter->vfs_allocated_count) {
+ u32 reg_data = rd32(E1000_CTRL_EXT);
+
+ reg_data |= E1000_CTRL_EXT_PFRSTD;
+ wr32(E1000_CTRL_EXT, reg_data);
+ }
+
+ netif_tx_start_all_queues(adapter->netdev);
+
+ /* start the watchdog. */
+ hw->mac.get_link_status = 1;
+ schedule_work(&adapter->watchdog_task);
+
+ if ((adapter->flags & IGB_FLAG_EEE) &&
+ (!hw->dev_spec._82575.eee_disable))
+ adapter->eee_advert = MDIO_EEE_100TX | MDIO_EEE_1000T;
+
+ return 0;
+}
+
+void igb_down(struct igb_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_hw *hw = &adapter->hw;
+ u32 tctl, rctl;
+ int i;
+
+ /* signal that we're down so the interrupt handler does not
+ * reschedule our watchdog timer
+ */
+ set_bit(__IGB_DOWN, &adapter->state);
+
+ /* disable receives in the hardware */
+ rctl = rd32(E1000_RCTL);
+ wr32(E1000_RCTL, rctl & ~E1000_RCTL_EN);
+ /* flush and sleep below */
+
+ netif_carrier_off(netdev);
+ netif_tx_stop_all_queues(netdev);
+
+ /* disable transmits in the hardware */
+ tctl = rd32(E1000_TCTL);
+ tctl &= ~E1000_TCTL_EN;
+ wr32(E1000_TCTL, tctl);
+ /* flush both disables and wait for them to finish */
+ wrfl();
+ usleep_range(10000, 11000);
+
+ igb_irq_disable(adapter);
+
+ adapter->flags &= ~IGB_FLAG_NEED_LINK_UPDATE;
+
+ for (i = 0; i < adapter->num_q_vectors; i++) {
+ if (adapter->q_vector[i]) {
+ napi_synchronize(&adapter->q_vector[i]->napi);
+ napi_disable(&adapter->q_vector[i]->napi);
+ }
+ }
+
+ del_timer_sync(&adapter->watchdog_timer);
+ del_timer_sync(&adapter->phy_info_timer);
+
+ /* record the stats before reset*/
+ spin_lock(&adapter->stats64_lock);
+ igb_update_stats(adapter, &adapter->stats64);
+ spin_unlock(&adapter->stats64_lock);
+
+ adapter->link_speed = 0;
+ adapter->link_duplex = 0;
+
+ if (!pci_channel_offline(adapter->pdev))
+ igb_reset(adapter);
+ igb_clean_all_tx_rings(adapter);
+ igb_clean_all_rx_rings(adapter);
+#ifdef CONFIG_IGB_DCA
+
+ /* since we reset the hardware DCA settings were cleared */
+ igb_setup_dca(adapter);
+#endif
+}
+
+void igb_reinit_locked(struct igb_adapter *adapter)
+{
+ WARN_ON(in_interrupt());
+ while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
+ usleep_range(1000, 2000);
+ igb_down(adapter);
+ igb_up(adapter);
+ clear_bit(__IGB_RESETTING, &adapter->state);
+}
+
+/** igb_enable_mas - Media Autosense re-enable after swap
+ *
+ * @adapter: adapter struct
+ **/
+static s32 igb_enable_mas(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 connsw;
+ s32 ret_val = 0;
+
+ connsw = rd32(E1000_CONNSW);
+ if (!(hw->phy.media_type == e1000_media_type_copper))
+ return ret_val;
+
+ /* configure for SerDes media detect */
+ if (!(connsw & E1000_CONNSW_SERDESD)) {
+ connsw |= E1000_CONNSW_ENRGSRC;
+ connsw |= E1000_CONNSW_AUTOSENSE_EN;
+ wr32(E1000_CONNSW, connsw);
+ wrfl();
+ } else if (connsw & E1000_CONNSW_SERDESD) {
+ /* already SerDes, no need to enable anything */
+ return ret_val;
+ } else {
+ netdev_info(adapter->netdev,
+ "MAS: Unable to configure feature, disabling..\n");
+ adapter->flags &= ~IGB_FLAG_MAS_ENABLE;
+ }
+ return ret_val;
+}
+
+void igb_reset(struct igb_adapter *adapter)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_mac_info *mac = &hw->mac;
+ struct e1000_fc_info *fc = &hw->fc;
+ u32 pba = 0, tx_space, min_tx_space, min_rx_space, hwm;
+
+ /* Repartition Pba for greater than 9k mtu
+ * To take effect CTRL.RST is required.
+ */
+ switch (mac->type) {
+ case e1000_i350:
+ case e1000_i354:
+ case e1000_82580:
+ pba = rd32(E1000_RXPBS);
+ pba = igb_rxpbs_adjust_82580(pba);
+ break;
+ case e1000_82576:
+ pba = rd32(E1000_RXPBS);
+ pba &= E1000_RXPBS_SIZE_MASK_82576;
+ break;
+ case e1000_82575:
+ case e1000_i210:
+ case e1000_i211:
+ default:
+ pba = E1000_PBA_34K;
+ break;
+ }
+
+ if ((adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) &&
+ (mac->type < e1000_82576)) {
+ /* adjust PBA for jumbo frames */
+ wr32(E1000_PBA, pba);
+
+ /* To maintain wire speed transmits, the Tx FIFO should be
+ * large enough to accommodate two full transmit packets,
+ * rounded up to the next 1KB and expressed in KB. Likewise,
+ * the Rx FIFO should be large enough to accommodate at least
+ * one full receive packet and is similarly rounded up and
+ * expressed in KB.
+ */
+ pba = rd32(E1000_PBA);
+ /* upper 16 bits has Tx packet buffer allocation size in KB */
+ tx_space = pba >> 16;
+ /* lower 16 bits has Rx packet buffer allocation size in KB */
+ pba &= 0xffff;
+ /* the Tx fifo also stores 16 bytes of information about the Tx
+ * but don't include ethernet FCS because hardware appends it
+ */
+ min_tx_space = (adapter->max_frame_size +
+ sizeof(union e1000_adv_tx_desc) -
+ ETH_FCS_LEN) * 2;
+ min_tx_space = ALIGN(min_tx_space, 1024);
+ min_tx_space >>= 10;
+ /* software strips receive CRC, so leave room for it */
+ min_rx_space = adapter->max_frame_size;
+ min_rx_space = ALIGN(min_rx_space, 1024);
+ min_rx_space >>= 10;
+
+ /* If current Tx allocation is less than the min Tx FIFO size,
+ * and the min Tx FIFO size is less than the current Rx FIFO
+ * allocation, take space away from current Rx allocation
+ */
+ if (tx_space < min_tx_space &&
+ ((min_tx_space - tx_space) < pba)) {
+ pba = pba - (min_tx_space - tx_space);
+
+ /* if short on Rx space, Rx wins and must trump Tx
+ * adjustment
+ */
+ if (pba < min_rx_space)
+ pba = min_rx_space;
+ }
+ wr32(E1000_PBA, pba);
+ }
+
+ /* flow control settings */
+ /* The high water mark must be low enough to fit one full frame
+ * (or the size used for early receive) above it in the Rx FIFO.
+ * Set it to the lower of:
+ * - 90% of the Rx FIFO size, or
+ * - the full Rx FIFO size minus one full frame
+ */
+ hwm = min(((pba << 10) * 9 / 10),
+ ((pba << 10) - 2 * adapter->max_frame_size));
+
+ fc->high_water = hwm & 0xFFFFFFF0; /* 16-byte granularity */
+ fc->low_water = fc->high_water - 16;
+ fc->pause_time = 0xFFFF;
+ fc->send_xon = 1;
+ fc->current_mode = fc->requested_mode;
+
+ /* disable receive for all VFs and wait one second */
+ if (adapter->vfs_allocated_count) {
+ int i;
+
+ for (i = 0 ; i < adapter->vfs_allocated_count; i++)
+ adapter->vf_data[i].flags &= IGB_VF_FLAG_PF_SET_MAC;
+
+ /* ping all the active vfs to let them know we are going down */
+ igb_ping_all_vfs(adapter);
+
+ /* disable transmits and receives */
+ wr32(E1000_VFRE, 0);
+ wr32(E1000_VFTE, 0);
+ }
+
+ /* Allow time for pending master requests to run */
+ hw->mac.ops.reset_hw(hw);
+ wr32(E1000_WUC, 0);
+
+ if (adapter->flags & IGB_FLAG_MEDIA_RESET) {
+ /* need to resetup here after media swap */
+ adapter->ei.get_invariants(hw);
+ adapter->flags &= ~IGB_FLAG_MEDIA_RESET;
+ }
+ if (adapter->flags & IGB_FLAG_MAS_ENABLE) {
+ if (igb_enable_mas(adapter))
+ dev_err(&pdev->dev,
+ "Error enabling Media Auto Sense\n");
+ }
+ if (hw->mac.ops.init_hw(hw))
+ dev_err(&pdev->dev, "Hardware Error\n");
+
+ /* Flow control settings reset on hardware reset, so guarantee flow
+ * control is off when forcing speed.
+ */
+ if (!hw->mac.autoneg)
+ igb_force_mac_fc(hw);
+
+ igb_init_dmac(adapter, pba);
+#ifdef CONFIG_IGB_HWMON
+ /* Re-initialize the thermal sensor on i350 devices. */
+ if (!test_bit(__IGB_DOWN, &adapter->state)) {
+ if (mac->type == e1000_i350 && hw->bus.func == 0) {
+ /* If present, re-initialize the external thermal sensor
+ * interface.
+ */
+ if (adapter->ets)
+ mac->ops.init_thermal_sensor_thresh(hw);
+ }
+ }
+#endif
+ /* Re-establish EEE setting */
+ if (hw->phy.media_type == e1000_media_type_copper) {
+ switch (mac->type) {
+ case e1000_i350:
+ case e1000_i210:
+ case e1000_i211:
+ igb_set_eee_i350(hw, true, true);
+ break;
+ case e1000_i354:
+ igb_set_eee_i354(hw, true, true);
+ break;
+ default:
+ break;
+ }
+ }
+ if (!netif_running(adapter->netdev))
+ igb_power_down_link(adapter);
+
+ igb_update_mng_vlan(adapter);
+
+ /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
+ wr32(E1000_VET, ETHERNET_IEEE_VLAN_TYPE);
+
+ /* Re-enable PTP, where applicable. */
+ igb_ptp_reset(adapter);
+
+ igb_get_phy_info(hw);
+}
+
+static netdev_features_t igb_fix_features(struct net_device *netdev,
+ netdev_features_t features)
+{
+ /* Since there is no support for separate Rx/Tx vlan accel
+ * enable/disable make sure Tx flag is always in same state as Rx.
+ */
+ if (features & NETIF_F_HW_VLAN_CTAG_RX)
+ features |= NETIF_F_HW_VLAN_CTAG_TX;
+ else
+ features &= ~NETIF_F_HW_VLAN_CTAG_TX;
+
+ return features;
+}
+
+static int igb_set_features(struct net_device *netdev,
+ netdev_features_t features)
+{
+ netdev_features_t changed = netdev->features ^ features;
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ if (changed & NETIF_F_HW_VLAN_CTAG_RX)
+ igb_vlan_mode(netdev, features);
+
+ if (!(changed & NETIF_F_RXALL))
+ return 0;
+
+ netdev->features = features;
+
+ if (netif_running(netdev))
+ igb_reinit_locked(adapter);
+ else
+ igb_reset(adapter);
+
+ return 0;
+}
+
+static const struct net_device_ops igb_netdev_ops = {
+ .ndo_open = igb_open,
+ .ndo_stop = igb_close,
+ .ndo_start_xmit = igb_xmit_frame,
+ .ndo_get_stats64 = igb_get_stats64,
+ .ndo_set_rx_mode = igb_set_rx_mode,
+ .ndo_set_mac_address = igb_set_mac,
+ .ndo_change_mtu = igb_change_mtu,
+ .ndo_do_ioctl = igb_ioctl,
+ .ndo_tx_timeout = igb_tx_timeout,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_vlan_rx_add_vid = igb_vlan_rx_add_vid,
+ .ndo_vlan_rx_kill_vid = igb_vlan_rx_kill_vid,
+ .ndo_set_vf_mac = igb_ndo_set_vf_mac,
+ .ndo_set_vf_vlan = igb_ndo_set_vf_vlan,
+ .ndo_set_vf_rate = igb_ndo_set_vf_bw,
+ .ndo_set_vf_spoofchk = igb_ndo_set_vf_spoofchk,
+ .ndo_get_vf_config = igb_ndo_get_vf_config,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = igb_netpoll,
+#endif
+ .ndo_fix_features = igb_fix_features,
+ .ndo_set_features = igb_set_features,
+ .ndo_features_check = passthru_features_check,
+};
+
+/**
+ * igb_set_fw_version - Configure version string for ethtool
+ * @adapter: adapter struct
+ **/
+void igb_set_fw_version(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_fw_version fw;
+
+ igb_get_fw_version(hw, &fw);
+
+ switch (hw->mac.type) {
+ case e1000_i210:
+ case e1000_i211:
+ if (!(igb_get_flash_presence_i210(hw))) {
+ snprintf(adapter->fw_version,
+ sizeof(adapter->fw_version),
+ "%2d.%2d-%d",
+ fw.invm_major, fw.invm_minor,
+ fw.invm_img_type);
+ break;
+ }
+ /* fall through */
+ default:
+ /* if option is rom valid, display its version too */
+ if (fw.or_valid) {
+ snprintf(adapter->fw_version,
+ sizeof(adapter->fw_version),
+ "%d.%d, 0x%08x, %d.%d.%d",
+ fw.eep_major, fw.eep_minor, fw.etrack_id,
+ fw.or_major, fw.or_build, fw.or_patch);
+ /* no option rom */
+ } else if (fw.etrack_id != 0X0000) {
+ snprintf(adapter->fw_version,
+ sizeof(adapter->fw_version),
+ "%d.%d, 0x%08x",
+ fw.eep_major, fw.eep_minor, fw.etrack_id);
+ } else {
+ snprintf(adapter->fw_version,
+ sizeof(adapter->fw_version),
+ "%d.%d.%d",
+ fw.eep_major, fw.eep_minor, fw.eep_build);
+ }
+ break;
+ }
+}
+
+/**
+ * igb_init_mas - init Media Autosense feature if enabled in the NVM
+ *
+ * @adapter: adapter struct
+ **/
+static void igb_init_mas(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 eeprom_data;
+
+ hw->nvm.ops.read(hw, NVM_COMPAT, 1, &eeprom_data);
+ switch (hw->bus.func) {
+ case E1000_FUNC_0:
+ if (eeprom_data & IGB_MAS_ENABLE_0) {
+ adapter->flags |= IGB_FLAG_MAS_ENABLE;
+ netdev_info(adapter->netdev,
+ "MAS: Enabling Media Autosense for port %d\n",
+ hw->bus.func);
+ }
+ break;
+ case E1000_FUNC_1:
+ if (eeprom_data & IGB_MAS_ENABLE_1) {
+ adapter->flags |= IGB_FLAG_MAS_ENABLE;
+ netdev_info(adapter->netdev,
+ "MAS: Enabling Media Autosense for port %d\n",
+ hw->bus.func);
+ }
+ break;
+ case E1000_FUNC_2:
+ if (eeprom_data & IGB_MAS_ENABLE_2) {
+ adapter->flags |= IGB_FLAG_MAS_ENABLE;
+ netdev_info(adapter->netdev,
+ "MAS: Enabling Media Autosense for port %d\n",
+ hw->bus.func);
+ }
+ break;
+ case E1000_FUNC_3:
+ if (eeprom_data & IGB_MAS_ENABLE_3) {
+ adapter->flags |= IGB_FLAG_MAS_ENABLE;
+ netdev_info(adapter->netdev,
+ "MAS: Enabling Media Autosense for port %d\n",
+ hw->bus.func);
+ }
+ break;
+ default:
+ /* Shouldn't get here */
+ netdev_err(adapter->netdev,
+ "MAS: Invalid port configuration, returning\n");
+ break;
+ }
+}
+
+/**
+ * igb_init_i2c - Init I2C interface
+ * @adapter: pointer to adapter structure
+ **/
+static s32 igb_init_i2c(struct igb_adapter *adapter)
+{
+ s32 status = 0;
+
+ /* I2C interface supported on i350 devices */
+ if (adapter->hw.mac.type != e1000_i350)
+ return 0;
+
+ /* Initialize the i2c bus which is controlled by the registers.
+ * This bus will use the i2c_algo_bit structue that implements
+ * the protocol through toggling of the 4 bits in the register.
+ */
+ adapter->i2c_adap.owner = THIS_MODULE;
+ adapter->i2c_algo = igb_i2c_algo;
+ adapter->i2c_algo.data = adapter;
+ adapter->i2c_adap.algo_data = &adapter->i2c_algo;
+ adapter->i2c_adap.dev.parent = &adapter->pdev->dev;
+ strlcpy(adapter->i2c_adap.name, "igb BB",
+ sizeof(adapter->i2c_adap.name));
+ status = i2c_bit_add_bus(&adapter->i2c_adap);
+ return status;
+}
+
+/**
+ * igb_probe - Device Initialization Routine
+ * @pdev: PCI device information struct
+ * @ent: entry in igb_pci_tbl
+ *
+ * Returns 0 on success, negative on failure
+ *
+ * igb_probe initializes an adapter identified by a pci_dev structure.
+ * The OS initialization, configuring of the adapter private structure,
+ * and a hardware reset occur.
+ **/
+static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ struct net_device *netdev;
+ struct igb_adapter *adapter;
+ struct e1000_hw *hw;
+ u16 eeprom_data = 0;
+ s32 ret_val;
+ static int global_quad_port_a; /* global quad port a indication */
+ const struct e1000_info *ei = igb_info_tbl[ent->driver_data];
+ int err, pci_using_dac;
+ u8 part_str[E1000_PBANUM_LENGTH];
+
+ /* Catch broken hardware that put the wrong VF device ID in
+ * the PCIe SR-IOV capability.
+ */
+ if (pdev->is_virtfn) {
+ WARN(1, KERN_ERR "%s (%hx:%hx) should not be a VF!\n",
+ pci_name(pdev), pdev->vendor, pdev->device);
+ return -EINVAL;
+ }
+
+ err = pci_enable_device_mem(pdev);
+ if (err)
+ return err;
+
+ pci_using_dac = 0;
+ err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
+ if (!err) {
+ pci_using_dac = 1;
+ } else {
+ err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+ if (err) {
+ dev_err(&pdev->dev,
+ "No usable DMA configuration, aborting\n");
+ goto err_dma;
+ }
+ }
+
+ err = pci_request_selected_regions(pdev, pci_select_bars(pdev,
+ IORESOURCE_MEM),
+ igb_driver_name);
+ if (err)
+ goto err_pci_reg;
+
+ pci_enable_pcie_error_reporting(pdev);
+
+ pci_set_master(pdev);
+ pci_save_state(pdev);
+
+ err = -ENOMEM;
+ netdev = alloc_etherdev_mq(sizeof(struct igb_adapter),
+ IGB_MAX_TX_QUEUES);
+ if (!netdev)
+ goto err_alloc_etherdev;
+
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+
+ pci_set_drvdata(pdev, netdev);
+ adapter = netdev_priv(netdev);
+ adapter->netdev = netdev;
+ adapter->pdev = pdev;
+ hw = &adapter->hw;
+ hw->back = adapter;
+ adapter->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE);
+
+ err = -EIO;
+ hw->hw_addr = pci_iomap(pdev, 0, 0);
+ if (!hw->hw_addr)
+ goto err_ioremap;
+
+ netdev->netdev_ops = &igb_netdev_ops;
+ igb_set_ethtool_ops(netdev);
+ netdev->watchdog_timeo = 5 * HZ;
+
+ strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
+
+ netdev->mem_start = pci_resource_start(pdev, 0);
+ netdev->mem_end = pci_resource_end(pdev, 0);
+
+ /* PCI config space info */
+ hw->vendor_id = pdev->vendor;
+ hw->device_id = pdev->device;
+ hw->revision_id = pdev->revision;
+ hw->subsystem_vendor_id = pdev->subsystem_vendor;
+ hw->subsystem_device_id = pdev->subsystem_device;
+
+ /* Copy the default MAC, PHY and NVM function pointers */
+ memcpy(&hw->mac.ops, ei->mac_ops, sizeof(hw->mac.ops));
+ memcpy(&hw->phy.ops, ei->phy_ops, sizeof(hw->phy.ops));
+ memcpy(&hw->nvm.ops, ei->nvm_ops, sizeof(hw->nvm.ops));
+ /* Initialize skew-specific constants */
+ err = ei->get_invariants(hw);
+ if (err)
+ goto err_sw_init;
+
+ /* setup the private structure */
+ err = igb_sw_init(adapter);
+ if (err)
+ goto err_sw_init;
+
+ igb_get_bus_info_pcie(hw);
+
+ hw->phy.autoneg_wait_to_complete = false;
+
+ /* Copper options */
+ if (hw->phy.media_type == e1000_media_type_copper) {
+ hw->phy.mdix = AUTO_ALL_MODES;
+ hw->phy.disable_polarity_correction = false;
+ hw->phy.ms_type = e1000_ms_hw_default;
+ }
+
+ if (igb_check_reset_block(hw))
+ dev_info(&pdev->dev,
+ "PHY reset is blocked due to SOL/IDER session.\n");
+
+ /* features is initialized to 0 in allocation, it might have bits
+ * set by igb_sw_init so we should use an or instead of an
+ * assignment.
+ */
+ netdev->features |= NETIF_F_SG |
+ NETIF_F_IP_CSUM |
+ NETIF_F_IPV6_CSUM |
+ NETIF_F_TSO |
+ NETIF_F_TSO6 |
+ NETIF_F_RXHASH |
+ NETIF_F_RXCSUM |
+ NETIF_F_HW_VLAN_CTAG_RX |
+ NETIF_F_HW_VLAN_CTAG_TX;
+
+ /* copy netdev features into list of user selectable features */
+ netdev->hw_features |= netdev->features;
+ netdev->hw_features |= NETIF_F_RXALL;
+
+ /* set this bit last since it cannot be part of hw_features */
+ netdev->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
+
+ netdev->vlan_features |= NETIF_F_TSO |
+ NETIF_F_TSO6 |
+ NETIF_F_IP_CSUM |
+ NETIF_F_IPV6_CSUM |
+ NETIF_F_SG;
+
+ netdev->priv_flags |= IFF_SUPP_NOFCS;
+
+ if (pci_using_dac) {
+ netdev->features |= NETIF_F_HIGHDMA;
+ netdev->vlan_features |= NETIF_F_HIGHDMA;
+ }
+
+ if (hw->mac.type >= e1000_82576) {
+ netdev->hw_features |= NETIF_F_SCTP_CSUM;
+ netdev->features |= NETIF_F_SCTP_CSUM;
+ }
+
+ netdev->priv_flags |= IFF_UNICAST_FLT;
+
+ adapter->en_mng_pt = igb_enable_mng_pass_thru(hw);
+
+ /* before reading the NVM, reset the controller to put the device in a
+ * known good starting state
+ */
+ hw->mac.ops.reset_hw(hw);
+
+ /* make sure the NVM is good , i211/i210 parts can have special NVM
+ * that doesn't contain a checksum
+ */
+ switch (hw->mac.type) {
+ case e1000_i210:
+ case e1000_i211:
+ if (igb_get_flash_presence_i210(hw)) {
+ if (hw->nvm.ops.validate(hw) < 0) {
+ dev_err(&pdev->dev,
+ "The NVM Checksum Is Not Valid\n");
+ err = -EIO;
+ goto err_eeprom;
+ }
+ }
+ break;
+ default:
+ if (hw->nvm.ops.validate(hw) < 0) {
+ dev_err(&pdev->dev, "The NVM Checksum Is Not Valid\n");
+ err = -EIO;
+ goto err_eeprom;
+ }
+ break;
+ }
+
+ /* copy the MAC address out of the NVM */
+ if (hw->mac.ops.read_mac_addr(hw))
+ dev_err(&pdev->dev, "NVM Read Error\n");
+
+ memcpy(netdev->dev_addr, hw->mac.addr, netdev->addr_len);
+
+ if (!is_valid_ether_addr(netdev->dev_addr)) {
+ dev_err(&pdev->dev, "Invalid MAC Address\n");
+ err = -EIO;
+ goto err_eeprom;
+ }
+
+ /* get firmware version for ethtool -i */
+ igb_set_fw_version(adapter);
+
+ /* configure RXPBSIZE and TXPBSIZE */
+ if (hw->mac.type == e1000_i210) {
+ wr32(E1000_RXPBS, I210_RXPBSIZE_DEFAULT);
+ wr32(E1000_TXPBS, I210_TXPBSIZE_DEFAULT);
+ }
+
+ setup_timer(&adapter->watchdog_timer, igb_watchdog,
+ (unsigned long) adapter);
+ setup_timer(&adapter->phy_info_timer, igb_update_phy_info,
+ (unsigned long) adapter);
+
+ INIT_WORK(&adapter->reset_task, igb_reset_task);
+ INIT_WORK(&adapter->watchdog_task, igb_watchdog_task);
+
+ /* Initialize link properties that are user-changeable */
+ adapter->fc_autoneg = true;
+ hw->mac.autoneg = true;
+ hw->phy.autoneg_advertised = 0x2f;
+
+ hw->fc.requested_mode = e1000_fc_default;
+ hw->fc.current_mode = e1000_fc_default;
+
+ igb_validate_mdi_setting(hw);
+
+ /* By default, support wake on port A */
+ if (hw->bus.func == 0)
+ adapter->flags |= IGB_FLAG_WOL_SUPPORTED;
+
+ /* Check the NVM for wake support on non-port A ports */
+ if (hw->mac.type >= e1000_82580)
+ hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A +
+ NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1,
+ &eeprom_data);
+ else if (hw->bus.func == 1)
+ hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
+
+ if (eeprom_data & IGB_EEPROM_APME)
+ adapter->flags |= IGB_FLAG_WOL_SUPPORTED;
+
+ /* now that we have the eeprom settings, apply the special cases where
+ * the eeprom may be wrong or the board simply won't support wake on
+ * lan on a particular port
+ */
+ switch (pdev->device) {
+ case E1000_DEV_ID_82575GB_QUAD_COPPER:
+ adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED;
+ break;
+ case E1000_DEV_ID_82575EB_FIBER_SERDES:
+ case E1000_DEV_ID_82576_FIBER:
+ case E1000_DEV_ID_82576_SERDES:
+ /* Wake events only supported on port A for dual fiber
+ * regardless of eeprom setting
+ */
+ if (rd32(E1000_STATUS) & E1000_STATUS_FUNC_1)
+ adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED;
+ break;
+ case E1000_DEV_ID_82576_QUAD_COPPER:
+ case E1000_DEV_ID_82576_QUAD_COPPER_ET2:
+ /* if quad port adapter, disable WoL on all but port A */
+ if (global_quad_port_a != 0)
+ adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED;
+ else
+ adapter->flags |= IGB_FLAG_QUAD_PORT_A;
+ /* Reset for multiple quad port adapters */
+ if (++global_quad_port_a == 4)
+ global_quad_port_a = 0;
+ break;
+ default:
+ /* If the device can't wake, don't set software support */
+ if (!device_can_wakeup(&adapter->pdev->dev))
+ adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED;
+ }
+
+ /* initialize the wol settings based on the eeprom settings */
+ if (adapter->flags & IGB_FLAG_WOL_SUPPORTED)
+ adapter->wol |= E1000_WUFC_MAG;
+
+ /* Some vendors want WoL disabled by default, but still supported */
+ if ((hw->mac.type == e1000_i350) &&
+ (pdev->subsystem_vendor == PCI_VENDOR_ID_HP)) {
+ adapter->flags |= IGB_FLAG_WOL_SUPPORTED;
+ adapter->wol = 0;
+ }
+
+ device_set_wakeup_enable(&adapter->pdev->dev,
+ adapter->flags & IGB_FLAG_WOL_SUPPORTED);
+
+ /* reset the hardware with the new settings */
+ igb_reset(adapter);
+
+ /* Init the I2C interface */
+ err = igb_init_i2c(adapter);
+ if (err) {
+ dev_err(&pdev->dev, "failed to init i2c interface\n");
+ goto err_eeprom;
+ }
+
+ /* let the f/w know that the h/w is now under the control of the
+ * driver.
+ */
+ igb_get_hw_control(adapter);
+
+ strcpy(netdev->name, "eth%d");
+ err = register_netdev(netdev);
+ if (err)
+ goto err_register;
+
+ /* carrier off reporting is important to ethtool even BEFORE open */
+ netif_carrier_off(netdev);
+
+#ifdef CONFIG_IGB_DCA
+ if (dca_add_requester(&pdev->dev) == 0) {
+ adapter->flags |= IGB_FLAG_DCA_ENABLED;
+ dev_info(&pdev->dev, "DCA enabled\n");
+ igb_setup_dca(adapter);
+ }
+
+#endif
+#ifdef CONFIG_IGB_HWMON
+ /* Initialize the thermal sensor on i350 devices. */
+ if (hw->mac.type == e1000_i350 && hw->bus.func == 0) {
+ u16 ets_word;
+
+ /* Read the NVM to determine if this i350 device supports an
+ * external thermal sensor.
+ */
+ hw->nvm.ops.read(hw, NVM_ETS_CFG, 1, &ets_word);
+ if (ets_word != 0x0000 && ets_word != 0xFFFF)
+ adapter->ets = true;
+ else
+ adapter->ets = false;
+ if (igb_sysfs_init(adapter))
+ dev_err(&pdev->dev,
+ "failed to allocate sysfs resources\n");
+ } else {
+ adapter->ets = false;
+ }
+#endif
+ /* Check if Media Autosense is enabled */
+ adapter->ei = *ei;
+ if (hw->dev_spec._82575.mas_capable)
+ igb_init_mas(adapter);
+
+ /* do hw tstamp init after resetting */
+ igb_ptp_init(adapter);
+
+ dev_info(&pdev->dev, "Intel(R) Gigabit Ethernet Network Connection\n");
+ /* print bus type/speed/width info, not applicable to i354 */
+ if (hw->mac.type != e1000_i354) {
+ dev_info(&pdev->dev, "%s: (PCIe:%s:%s) %pM\n",
+ netdev->name,
+ ((hw->bus.speed == e1000_bus_speed_2500) ? "2.5Gb/s" :
+ (hw->bus.speed == e1000_bus_speed_5000) ? "5.0Gb/s" :
+ "unknown"),
+ ((hw->bus.width == e1000_bus_width_pcie_x4) ?
+ "Width x4" :
+ (hw->bus.width == e1000_bus_width_pcie_x2) ?
+ "Width x2" :
+ (hw->bus.width == e1000_bus_width_pcie_x1) ?
+ "Width x1" : "unknown"), netdev->dev_addr);
+ }
+
+ if ((hw->mac.type >= e1000_i210 ||
+ igb_get_flash_presence_i210(hw))) {
+ ret_val = igb_read_part_string(hw, part_str,
+ E1000_PBANUM_LENGTH);
+ } else {
+ ret_val = -E1000_ERR_INVM_VALUE_NOT_FOUND;
+ }
+
+ if (ret_val)
+ strcpy(part_str, "Unknown");
+ dev_info(&pdev->dev, "%s: PBA No: %s\n", netdev->name, part_str);
+ dev_info(&pdev->dev,
+ "Using %s interrupts. %d rx queue(s), %d tx queue(s)\n",
+ (adapter->flags & IGB_FLAG_HAS_MSIX) ? "MSI-X" :
+ (adapter->flags & IGB_FLAG_HAS_MSI) ? "MSI" : "legacy",
+ adapter->num_rx_queues, adapter->num_tx_queues);
+ if (hw->phy.media_type == e1000_media_type_copper) {
+ switch (hw->mac.type) {
+ case e1000_i350:
+ case e1000_i210:
+ case e1000_i211:
+ /* Enable EEE for internal copper PHY devices */
+ err = igb_set_eee_i350(hw, true, true);
+ if ((!err) &&
+ (!hw->dev_spec._82575.eee_disable)) {
+ adapter->eee_advert =
+ MDIO_EEE_100TX | MDIO_EEE_1000T;
+ adapter->flags |= IGB_FLAG_EEE;
+ }
+ break;
+ case e1000_i354:
+ if ((rd32(E1000_CTRL_EXT) &
+ E1000_CTRL_EXT_LINK_MODE_SGMII)) {
+ err = igb_set_eee_i354(hw, true, true);
+ if ((!err) &&
+ (!hw->dev_spec._82575.eee_disable)) {
+ adapter->eee_advert =
+ MDIO_EEE_100TX | MDIO_EEE_1000T;
+ adapter->flags |= IGB_FLAG_EEE;
+ }
+ }
+ break;
+ default:
+ break;
+ }
+ }
+ pm_runtime_put_noidle(&pdev->dev);
+ return 0;
+
+err_register:
+ igb_release_hw_control(adapter);
+ memset(&adapter->i2c_adap, 0, sizeof(adapter->i2c_adap));
+err_eeprom:
+ if (!igb_check_reset_block(hw))
+ igb_reset_phy(hw);
+
+ if (hw->flash_address)
+ iounmap(hw->flash_address);
+err_sw_init:
+ igb_clear_interrupt_scheme(adapter);
+ pci_iounmap(pdev, hw->hw_addr);
+err_ioremap:
+ free_netdev(netdev);
+err_alloc_etherdev:
+ pci_release_selected_regions(pdev,
+ pci_select_bars(pdev, IORESOURCE_MEM));
+err_pci_reg:
+err_dma:
+ pci_disable_device(pdev);
+ return err;
+}
+
+#ifdef CONFIG_PCI_IOV
+static int igb_disable_sriov(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* reclaim resources allocated to VFs */
+ if (adapter->vf_data) {
+ /* disable iov and allow time for transactions to clear */
+ if (pci_vfs_assigned(pdev)) {
+ dev_warn(&pdev->dev,
+ "Cannot deallocate SR-IOV virtual functions while they are assigned - VFs will not be deallocated\n");
+ return -EPERM;
+ } else {
+ pci_disable_sriov(pdev);
+ msleep(500);
+ }
+
+ kfree(adapter->vf_data);
+ adapter->vf_data = NULL;
+ adapter->vfs_allocated_count = 0;
+ wr32(E1000_IOVCTL, E1000_IOVCTL_REUSE_VFQ);
+ wrfl();
+ msleep(100);
+ dev_info(&pdev->dev, "IOV Disabled\n");
+
+ /* Re-enable DMA Coalescing flag since IOV is turned off */
+ adapter->flags |= IGB_FLAG_DMAC;
+ }
+
+ return 0;
+}
+
+static int igb_enable_sriov(struct pci_dev *pdev, int num_vfs)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ int old_vfs = pci_num_vf(pdev);
+ int err = 0;
+ int i;
+
+ if (!(adapter->flags & IGB_FLAG_HAS_MSIX) || num_vfs > 7) {
+ err = -EPERM;
+ goto out;
+ }
+ if (!num_vfs)
+ goto out;
+
+ if (old_vfs) {
+ dev_info(&pdev->dev, "%d pre-allocated VFs found - override max_vfs setting of %d\n",
+ old_vfs, max_vfs);
+ adapter->vfs_allocated_count = old_vfs;
+ } else
+ adapter->vfs_allocated_count = num_vfs;
+
+ adapter->vf_data = kcalloc(adapter->vfs_allocated_count,
+ sizeof(struct vf_data_storage), GFP_KERNEL);
+
+ /* if allocation failed then we do not support SR-IOV */
+ if (!adapter->vf_data) {
+ adapter->vfs_allocated_count = 0;
+ dev_err(&pdev->dev,
+ "Unable to allocate memory for VF Data Storage\n");
+ err = -ENOMEM;
+ goto out;
+ }
+
+ /* only call pci_enable_sriov() if no VFs are allocated already */
+ if (!old_vfs) {
+ err = pci_enable_sriov(pdev, adapter->vfs_allocated_count);
+ if (err)
+ goto err_out;
+ }
+ dev_info(&pdev->dev, "%d VFs allocated\n",
+ adapter->vfs_allocated_count);
+ for (i = 0; i < adapter->vfs_allocated_count; i++)
+ igb_vf_configure(adapter, i);
+
+ /* DMA Coalescing is not supported in IOV mode. */
+ adapter->flags &= ~IGB_FLAG_DMAC;
+ goto out;
+
+err_out:
+ kfree(adapter->vf_data);
+ adapter->vf_data = NULL;
+ adapter->vfs_allocated_count = 0;
+out:
+ return err;
+}
+
+#endif
+/**
+ * igb_remove_i2c - Cleanup I2C interface
+ * @adapter: pointer to adapter structure
+ **/
+static void igb_remove_i2c(struct igb_adapter *adapter)
+{
+ /* free the adapter bus structure */
+ i2c_del_adapter(&adapter->i2c_adap);
+}
+
+/**
+ * igb_remove - Device Removal Routine
+ * @pdev: PCI device information struct
+ *
+ * igb_remove is called by the PCI subsystem to alert the driver
+ * that it should release a PCI device. The could be caused by a
+ * Hot-Plug event, or because the driver is going to be removed from
+ * memory.
+ **/
+static void igb_remove(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ pm_runtime_get_noresume(&pdev->dev);
+#ifdef CONFIG_IGB_HWMON
+ igb_sysfs_exit(adapter);
+#endif
+ igb_remove_i2c(adapter);
+ igb_ptp_stop(adapter);
+ /* The watchdog timer may be rescheduled, so explicitly
+ * disable watchdog from being rescheduled.
+ */
+ set_bit(__IGB_DOWN, &adapter->state);
+ del_timer_sync(&adapter->watchdog_timer);
+ del_timer_sync(&adapter->phy_info_timer);
+
+ cancel_work_sync(&adapter->reset_task);
+ cancel_work_sync(&adapter->watchdog_task);
+
+#ifdef CONFIG_IGB_DCA
+ if (adapter->flags & IGB_FLAG_DCA_ENABLED) {
+ dev_info(&pdev->dev, "DCA disabled\n");
+ dca_remove_requester(&pdev->dev);
+ adapter->flags &= ~IGB_FLAG_DCA_ENABLED;
+ wr32(E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_DISABLE);
+ }
+#endif
+
+ /* Release control of h/w to f/w. If f/w is AMT enabled, this
+ * would have already happened in close and is redundant.
+ */
+ igb_release_hw_control(adapter);
+
+ unregister_netdev(netdev);
+
+ igb_clear_interrupt_scheme(adapter);
+
+#ifdef CONFIG_PCI_IOV
+ igb_disable_sriov(pdev);
+#endif
+
+ pci_iounmap(pdev, hw->hw_addr);
+ if (hw->flash_address)
+ iounmap(hw->flash_address);
+ pci_release_selected_regions(pdev,
+ pci_select_bars(pdev, IORESOURCE_MEM));
+
+ kfree(adapter->shadow_vfta);
+ free_netdev(netdev);
+
+ pci_disable_pcie_error_reporting(pdev);
+
+ pci_disable_device(pdev);
+}
+
+/**
+ * igb_probe_vfs - Initialize vf data storage and add VFs to pci config space
+ * @adapter: board private structure to initialize
+ *
+ * This function initializes the vf specific data storage and then attempts to
+ * allocate the VFs. The reason for ordering it this way is because it is much
+ * mor expensive time wise to disable SR-IOV than it is to allocate and free
+ * the memory for the VFs.
+ **/
+static void igb_probe_vfs(struct igb_adapter *adapter)
+{
+#ifdef CONFIG_PCI_IOV
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* Virtualization features not supported on i210 family. */
+ if ((hw->mac.type == e1000_i210) || (hw->mac.type == e1000_i211))
+ return;
+
+ pci_sriov_set_totalvfs(pdev, 7);
+ igb_pci_enable_sriov(pdev, max_vfs);
+
+#endif /* CONFIG_PCI_IOV */
+}
+
+static void igb_init_queue_configuration(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 max_rss_queues;
+
+ /* Determine the maximum number of RSS queues supported. */
+ switch (hw->mac.type) {
+ case e1000_i211:
+ max_rss_queues = IGB_MAX_RX_QUEUES_I211;
+ break;
+ case e1000_82575:
+ case e1000_i210:
+ max_rss_queues = IGB_MAX_RX_QUEUES_82575;
+ break;
+ case e1000_i350:
+ /* I350 cannot do RSS and SR-IOV at the same time */
+ if (!!adapter->vfs_allocated_count) {
+ max_rss_queues = 1;
+ break;
+ }
+ /* fall through */
+ case e1000_82576:
+ if (!!adapter->vfs_allocated_count) {
+ max_rss_queues = 2;
+ break;
+ }
+ /* fall through */
+ case e1000_82580:
+ case e1000_i354:
+ default:
+ max_rss_queues = IGB_MAX_RX_QUEUES;
+ break;
+ }
+
+ adapter->rss_queues = min_t(u32, max_rss_queues, num_online_cpus());
+
+ /* Determine if we need to pair queues. */
+ switch (hw->mac.type) {
+ case e1000_82575:
+ case e1000_i211:
+ /* Device supports enough interrupts without queue pairing. */
+ break;
+ case e1000_82576:
+ /* If VFs are going to be allocated with RSS queues then we
+ * should pair the queues in order to conserve interrupts due
+ * to limited supply.
+ */
+ if ((adapter->rss_queues > 1) &&
+ (adapter->vfs_allocated_count > 6))
+ adapter->flags |= IGB_FLAG_QUEUE_PAIRS;
+ /* fall through */
+ case e1000_82580:
+ case e1000_i350:
+ case e1000_i354:
+ case e1000_i210:
+ default:
+ /* If rss_queues > half of max_rss_queues, pair the queues in
+ * order to conserve interrupts due to limited supply.
+ */
+ if (adapter->rss_queues > (max_rss_queues / 2))
+ adapter->flags |= IGB_FLAG_QUEUE_PAIRS;
+ break;
+ }
+}
+
+/**
+ * igb_sw_init - Initialize general software structures (struct igb_adapter)
+ * @adapter: board private structure to initialize
+ *
+ * igb_sw_init initializes the Adapter private data structure.
+ * Fields are initialized based on PCI device information and
+ * OS network device settings (MTU size).
+ **/
+static int igb_sw_init(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+
+ pci_read_config_word(pdev, PCI_COMMAND, &hw->bus.pci_cmd_word);
+
+ /* set default ring sizes */
+ adapter->tx_ring_count = IGB_DEFAULT_TXD;
+ adapter->rx_ring_count = IGB_DEFAULT_RXD;
+
+ /* set default ITR values */
+ adapter->rx_itr_setting = IGB_DEFAULT_ITR;
+ adapter->tx_itr_setting = IGB_DEFAULT_ITR;
+
+ /* set default work limits */
+ adapter->tx_work_limit = IGB_DEFAULT_TX_WORK;
+
+ adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN +
+ VLAN_HLEN;
+ adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
+
+ spin_lock_init(&adapter->stats64_lock);
+#ifdef CONFIG_PCI_IOV
+ switch (hw->mac.type) {
+ case e1000_82576:
+ case e1000_i350:
+ if (max_vfs > 7) {
+ dev_warn(&pdev->dev,
+ "Maximum of 7 VFs per PF, using max\n");
+ max_vfs = adapter->vfs_allocated_count = 7;
+ } else
+ adapter->vfs_allocated_count = max_vfs;
+ if (adapter->vfs_allocated_count)
+ dev_warn(&pdev->dev,
+ "Enabling SR-IOV VFs using the module parameter is deprecated - please use the pci sysfs interface.\n");
+ break;
+ default:
+ break;
+ }
+#endif /* CONFIG_PCI_IOV */
+
+ igb_init_queue_configuration(adapter);
+
+ /* Setup and initialize a copy of the hw vlan table array */
+ adapter->shadow_vfta = kcalloc(E1000_VLAN_FILTER_TBL_SIZE, sizeof(u32),
+ GFP_ATOMIC);
+
+ /* This call may decrease the number of queues */
+ if (igb_init_interrupt_scheme(adapter, true)) {
+ dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
+ return -ENOMEM;
+ }
+
+ igb_probe_vfs(adapter);
+
+ /* Explicitly disable IRQ since the NIC can be in any state. */
+ igb_irq_disable(adapter);
+
+ if (hw->mac.type >= e1000_i350)
+ adapter->flags &= ~IGB_FLAG_DMAC;
+
+ set_bit(__IGB_DOWN, &adapter->state);
+ return 0;
+}
+
+/**
+ * igb_open - Called when a network interface is made active
+ * @netdev: network interface device structure
+ *
+ * Returns 0 on success, negative value on failure
+ *
+ * The open entry point is called when a network interface is made
+ * active by the system (IFF_UP). At this point all resources needed
+ * for transmit and receive operations are allocated, the interrupt
+ * handler is registered with the OS, the watchdog timer is started,
+ * and the stack is notified that the interface is ready.
+ **/
+static int __igb_open(struct net_device *netdev, bool resuming)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct pci_dev *pdev = adapter->pdev;
+ int err;
+ int i;
+
+ /* disallow open during test */
+ if (test_bit(__IGB_TESTING, &adapter->state)) {
+ WARN_ON(resuming);
+ return -EBUSY;
+ }
+
+ if (!resuming)
+ pm_runtime_get_sync(&pdev->dev);
+
+ netif_carrier_off(netdev);
+
+ /* allocate transmit descriptors */
+ err = igb_setup_all_tx_resources(adapter);
+ if (err)
+ goto err_setup_tx;
+
+ /* allocate receive descriptors */
+ err = igb_setup_all_rx_resources(adapter);
+ if (err)
+ goto err_setup_rx;
+
+ igb_power_up_link(adapter);
+
+ /* before we allocate an interrupt, we must be ready to handle it.
+ * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
+ * as soon as we call pci_request_irq, so we have to setup our
+ * clean_rx handler before we do so.
+ */
+ igb_configure(adapter);
+
+ err = igb_request_irq(adapter);
+ if (err)
+ goto err_req_irq;
+
+ /* Notify the stack of the actual queue counts. */
+ err = netif_set_real_num_tx_queues(adapter->netdev,
+ adapter->num_tx_queues);
+ if (err)
+ goto err_set_queues;
+
+ err = netif_set_real_num_rx_queues(adapter->netdev,
+ adapter->num_rx_queues);
+ if (err)
+ goto err_set_queues;
+
+ /* From here on the code is the same as igb_up() */
+ clear_bit(__IGB_DOWN, &adapter->state);
+
+ for (i = 0; i < adapter->num_q_vectors; i++)
+ napi_enable(&(adapter->q_vector[i]->napi));
+
+ /* Clear any pending interrupts. */
+ rd32(E1000_ICR);
+
+ igb_irq_enable(adapter);
+
+ /* notify VFs that reset has been completed */
+ if (adapter->vfs_allocated_count) {
+ u32 reg_data = rd32(E1000_CTRL_EXT);
+
+ reg_data |= E1000_CTRL_EXT_PFRSTD;
+ wr32(E1000_CTRL_EXT, reg_data);
+ }
+
+ netif_tx_start_all_queues(netdev);
+
+ if (!resuming)
+ pm_runtime_put(&pdev->dev);
+
+ /* start the watchdog. */
+ hw->mac.get_link_status = 1;
+ schedule_work(&adapter->watchdog_task);
+
+ return 0;
+
+err_set_queues:
+ igb_free_irq(adapter);
+err_req_irq:
+ igb_release_hw_control(adapter);
+ igb_power_down_link(adapter);
+ igb_free_all_rx_resources(adapter);
+err_setup_rx:
+ igb_free_all_tx_resources(adapter);
+err_setup_tx:
+ igb_reset(adapter);
+ if (!resuming)
+ pm_runtime_put(&pdev->dev);
+
+ return err;
+}
+
+static int igb_open(struct net_device *netdev)
+{
+ return __igb_open(netdev, false);
+}
+
+/**
+ * igb_close - Disables a network interface
+ * @netdev: network interface device structure
+ *
+ * Returns 0, this is not allowed to fail
+ *
+ * The close entry point is called when an interface is de-activated
+ * by the OS. The hardware is still under the driver's control, but
+ * needs to be disabled. A global MAC reset is issued to stop the
+ * hardware, and all transmit and receive resources are freed.
+ **/
+static int __igb_close(struct net_device *netdev, bool suspending)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct pci_dev *pdev = adapter->pdev;
+
+ WARN_ON(test_bit(__IGB_RESETTING, &adapter->state));
+
+ if (!suspending)
+ pm_runtime_get_sync(&pdev->dev);
+
+ igb_down(adapter);
+ igb_free_irq(adapter);
+
+ igb_free_all_tx_resources(adapter);
+ igb_free_all_rx_resources(adapter);
+
+ if (!suspending)
+ pm_runtime_put_sync(&pdev->dev);
+ return 0;
+}
+
+static int igb_close(struct net_device *netdev)
+{
+ return __igb_close(netdev, false);
+}
+
+/**
+ * igb_setup_tx_resources - allocate Tx resources (Descriptors)
+ * @tx_ring: tx descriptor ring (for a specific queue) to setup
+ *
+ * Return 0 on success, negative on failure
+ **/
+int igb_setup_tx_resources(struct igb_ring *tx_ring)
+{
+ struct device *dev = tx_ring->dev;
+ int size;
+
+ size = sizeof(struct igb_tx_buffer) * tx_ring->count;
+
+ tx_ring->tx_buffer_info = vzalloc(size);
+ if (!tx_ring->tx_buffer_info)
+ goto err;
+
+ /* round up to nearest 4K */
+ tx_ring->size = tx_ring->count * sizeof(union e1000_adv_tx_desc);
+ tx_ring->size = ALIGN(tx_ring->size, 4096);
+
+ tx_ring->desc = dma_alloc_coherent(dev, tx_ring->size,
+ &tx_ring->dma, GFP_KERNEL);
+ if (!tx_ring->desc)
+ goto err;
+
+ tx_ring->next_to_use = 0;
+ tx_ring->next_to_clean = 0;
+
+ return 0;
+
+err:
+ vfree(tx_ring->tx_buffer_info);
+ tx_ring->tx_buffer_info = NULL;
+ dev_err(dev, "Unable to allocate memory for the Tx descriptor ring\n");
+ return -ENOMEM;
+}
+
+/**
+ * igb_setup_all_tx_resources - wrapper to allocate Tx resources
+ * (Descriptors) for all queues
+ * @adapter: board private structure
+ *
+ * Return 0 on success, negative on failure
+ **/
+static int igb_setup_all_tx_resources(struct igb_adapter *adapter)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ int i, err = 0;
+
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ err = igb_setup_tx_resources(adapter->tx_ring[i]);
+ if (err) {
+ dev_err(&pdev->dev,
+ "Allocation for Tx Queue %u failed\n", i);
+ for (i--; i >= 0; i--)
+ igb_free_tx_resources(adapter->tx_ring[i]);
+ break;
+ }
+ }
+
+ return err;
+}
+
+/**
+ * igb_setup_tctl - configure the transmit control registers
+ * @adapter: Board private structure
+ **/
+void igb_setup_tctl(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 tctl;
+
+ /* disable queue 0 which is enabled by default on 82575 and 82576 */
+ wr32(E1000_TXDCTL(0), 0);
+
+ /* Program the Transmit Control Register */
+ tctl = rd32(E1000_TCTL);
+ tctl &= ~E1000_TCTL_CT;
+ tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
+ (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
+
+ igb_config_collision_dist(hw);
+
+ /* Enable transmits */
+ tctl |= E1000_TCTL_EN;
+
+ wr32(E1000_TCTL, tctl);
+}
+
+/**
+ * igb_configure_tx_ring - Configure transmit ring after Reset
+ * @adapter: board private structure
+ * @ring: tx ring to configure
+ *
+ * Configure a transmit ring after a reset.
+ **/
+void igb_configure_tx_ring(struct igb_adapter *adapter,
+ struct igb_ring *ring)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 txdctl = 0;
+ u64 tdba = ring->dma;
+ int reg_idx = ring->reg_idx;
+
+ /* disable the queue */
+ wr32(E1000_TXDCTL(reg_idx), 0);
+ wrfl();
+ mdelay(10);
+
+ wr32(E1000_TDLEN(reg_idx),
+ ring->count * sizeof(union e1000_adv_tx_desc));
+ wr32(E1000_TDBAL(reg_idx),
+ tdba & 0x00000000ffffffffULL);
+ wr32(E1000_TDBAH(reg_idx), tdba >> 32);
+
+ ring->tail = hw->hw_addr + E1000_TDT(reg_idx);
+ wr32(E1000_TDH(reg_idx), 0);
+ writel(0, ring->tail);
+
+ txdctl |= IGB_TX_PTHRESH;
+ txdctl |= IGB_TX_HTHRESH << 8;
+ txdctl |= IGB_TX_WTHRESH << 16;
+
+ txdctl |= E1000_TXDCTL_QUEUE_ENABLE;
+ wr32(E1000_TXDCTL(reg_idx), txdctl);
+}
+
+/**
+ * igb_configure_tx - Configure transmit Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Tx unit of the MAC after a reset.
+ **/
+static void igb_configure_tx(struct igb_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ igb_configure_tx_ring(adapter, adapter->tx_ring[i]);
+}
+
+/**
+ * igb_setup_rx_resources - allocate Rx resources (Descriptors)
+ * @rx_ring: Rx descriptor ring (for a specific queue) to setup
+ *
+ * Returns 0 on success, negative on failure
+ **/
+int igb_setup_rx_resources(struct igb_ring *rx_ring)
+{
+ struct device *dev = rx_ring->dev;
+ int size;
+
+ size = sizeof(struct igb_rx_buffer) * rx_ring->count;
+
+ rx_ring->rx_buffer_info = vzalloc(size);
+ if (!rx_ring->rx_buffer_info)
+ goto err;
+
+ /* Round up to nearest 4K */
+ rx_ring->size = rx_ring->count * sizeof(union e1000_adv_rx_desc);
+ rx_ring->size = ALIGN(rx_ring->size, 4096);
+
+ rx_ring->desc = dma_alloc_coherent(dev, rx_ring->size,
+ &rx_ring->dma, GFP_KERNEL);
+ if (!rx_ring->desc)
+ goto err;
+
+ rx_ring->next_to_alloc = 0;
+ rx_ring->next_to_clean = 0;
+ rx_ring->next_to_use = 0;
+
+ return 0;
+
+err:
+ vfree(rx_ring->rx_buffer_info);
+ rx_ring->rx_buffer_info = NULL;
+ dev_err(dev, "Unable to allocate memory for the Rx descriptor ring\n");
+ return -ENOMEM;
+}
+
+/**
+ * igb_setup_all_rx_resources - wrapper to allocate Rx resources
+ * (Descriptors) for all queues
+ * @adapter: board private structure
+ *
+ * Return 0 on success, negative on failure
+ **/
+static int igb_setup_all_rx_resources(struct igb_adapter *adapter)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ int i, err = 0;
+
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ err = igb_setup_rx_resources(adapter->rx_ring[i]);
+ if (err) {
+ dev_err(&pdev->dev,
+ "Allocation for Rx Queue %u failed\n", i);
+ for (i--; i >= 0; i--)
+ igb_free_rx_resources(adapter->rx_ring[i]);
+ break;
+ }
+ }
+
+ return err;
+}
+
+/**
+ * igb_setup_mrqc - configure the multiple receive queue control registers
+ * @adapter: Board private structure
+ **/
+static void igb_setup_mrqc(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 mrqc, rxcsum;
+ u32 j, num_rx_queues;
+ u32 rss_key[10];
+
+ netdev_rss_key_fill(rss_key, sizeof(rss_key));
+ for (j = 0; j < 10; j++)
+ wr32(E1000_RSSRK(j), rss_key[j]);
+
+ num_rx_queues = adapter->rss_queues;
+
+ switch (hw->mac.type) {
+ case e1000_82576:
+ /* 82576 supports 2 RSS queues for SR-IOV */
+ if (adapter->vfs_allocated_count)
+ num_rx_queues = 2;
+ break;
+ default:
+ break;
+ }
+
+ if (adapter->rss_indir_tbl_init != num_rx_queues) {
+ for (j = 0; j < IGB_RETA_SIZE; j++)
+ adapter->rss_indir_tbl[j] =
+ (j * num_rx_queues) / IGB_RETA_SIZE;
+ adapter->rss_indir_tbl_init = num_rx_queues;
+ }
+ igb_write_rss_indir_tbl(adapter);
+
+ /* Disable raw packet checksumming so that RSS hash is placed in
+ * descriptor on writeback. No need to enable TCP/UDP/IP checksum
+ * offloads as they are enabled by default
+ */
+ rxcsum = rd32(E1000_RXCSUM);
+ rxcsum |= E1000_RXCSUM_PCSD;
+
+ if (adapter->hw.mac.type >= e1000_82576)
+ /* Enable Receive Checksum Offload for SCTP */
+ rxcsum |= E1000_RXCSUM_CRCOFL;
+
+ /* Don't need to set TUOFL or IPOFL, they default to 1 */
+ wr32(E1000_RXCSUM, rxcsum);
+
+ /* Generate RSS hash based on packet types, TCP/UDP
+ * port numbers and/or IPv4/v6 src and dst addresses
+ */
+ mrqc = E1000_MRQC_RSS_FIELD_IPV4 |
+ E1000_MRQC_RSS_FIELD_IPV4_TCP |
+ E1000_MRQC_RSS_FIELD_IPV6 |
+ E1000_MRQC_RSS_FIELD_IPV6_TCP |
+ E1000_MRQC_RSS_FIELD_IPV6_TCP_EX;
+
+ if (adapter->flags & IGB_FLAG_RSS_FIELD_IPV4_UDP)
+ mrqc |= E1000_MRQC_RSS_FIELD_IPV4_UDP;
+ if (adapter->flags & IGB_FLAG_RSS_FIELD_IPV6_UDP)
+ mrqc |= E1000_MRQC_RSS_FIELD_IPV6_UDP;
+
+ /* If VMDq is enabled then we set the appropriate mode for that, else
+ * we default to RSS so that an RSS hash is calculated per packet even
+ * if we are only using one queue
+ */
+ if (adapter->vfs_allocated_count) {
+ if (hw->mac.type > e1000_82575) {
+ /* Set the default pool for the PF's first queue */
+ u32 vtctl = rd32(E1000_VT_CTL);
+
+ vtctl &= ~(E1000_VT_CTL_DEFAULT_POOL_MASK |
+ E1000_VT_CTL_DISABLE_DEF_POOL);
+ vtctl |= adapter->vfs_allocated_count <<
+ E1000_VT_CTL_DEFAULT_POOL_SHIFT;
+ wr32(E1000_VT_CTL, vtctl);
+ }
+ if (adapter->rss_queues > 1)
+ mrqc |= E1000_MRQC_ENABLE_VMDQ_RSS_2Q;
+ else
+ mrqc |= E1000_MRQC_ENABLE_VMDQ;
+ } else {
+ if (hw->mac.type != e1000_i211)
+ mrqc |= E1000_MRQC_ENABLE_RSS_4Q;
+ }
+ igb_vmm_control(adapter);
+
+ wr32(E1000_MRQC, mrqc);
+}
+
+/**
+ * igb_setup_rctl - configure the receive control registers
+ * @adapter: Board private structure
+ **/
+void igb_setup_rctl(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rctl;
+
+ rctl = rd32(E1000_RCTL);
+
+ rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
+ rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC);
+
+ rctl |= E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_RDMTS_HALF |
+ (hw->mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
+
+ /* enable stripping of CRC. It's unlikely this will break BMC
+ * redirection as it did with e1000. Newer features require
+ * that the HW strips the CRC.
+ */
+ rctl |= E1000_RCTL_SECRC;
+
+ /* disable store bad packets and clear size bits. */
+ rctl &= ~(E1000_RCTL_SBP | E1000_RCTL_SZ_256);
+
+ /* enable LPE to prevent packets larger than max_frame_size */
+ rctl |= E1000_RCTL_LPE;
+
+ /* disable queue 0 to prevent tail write w/o re-config */
+ wr32(E1000_RXDCTL(0), 0);
+
+ /* Attention!!! For SR-IOV PF driver operations you must enable
+ * queue drop for all VF and PF queues to prevent head of line blocking
+ * if an un-trusted VF does not provide descriptors to hardware.
+ */
+ if (adapter->vfs_allocated_count) {
+ /* set all queue drop enable bits */
+ wr32(E1000_QDE, ALL_QUEUES);
+ }
+
+ /* This is useful for sniffing bad packets. */
+ if (adapter->netdev->features & NETIF_F_RXALL) {
+ /* UPE and MPE will be handled by normal PROMISC logic
+ * in e1000e_set_rx_mode
+ */
+ rctl |= (E1000_RCTL_SBP | /* Receive bad packets */
+ E1000_RCTL_BAM | /* RX All Bcast Pkts */
+ E1000_RCTL_PMCF); /* RX All MAC Ctrl Pkts */
+
+ rctl &= ~(E1000_RCTL_VFE | /* Disable VLAN filter */
+ E1000_RCTL_DPF | /* Allow filtered pause */
+ E1000_RCTL_CFIEN); /* Dis VLAN CFIEN Filter */
+ /* Do not mess with E1000_CTRL_VME, it affects transmit as well,
+ * and that breaks VLANs.
+ */
+ }
+
+ wr32(E1000_RCTL, rctl);
+}
+
+static inline int igb_set_vf_rlpml(struct igb_adapter *adapter, int size,
+ int vfn)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 vmolr;
+
+ /* if it isn't the PF check to see if VFs are enabled and
+ * increase the size to support vlan tags
+ */
+ if (vfn < adapter->vfs_allocated_count &&
+ adapter->vf_data[vfn].vlans_enabled)
+ size += VLAN_TAG_SIZE;
+
+ vmolr = rd32(E1000_VMOLR(vfn));
+ vmolr &= ~E1000_VMOLR_RLPML_MASK;
+ vmolr |= size | E1000_VMOLR_LPE;
+ wr32(E1000_VMOLR(vfn), vmolr);
+
+ return 0;
+}
+
+/**
+ * igb_rlpml_set - set maximum receive packet size
+ * @adapter: board private structure
+ *
+ * Configure maximum receivable packet size.
+ **/
+static void igb_rlpml_set(struct igb_adapter *adapter)
+{
+ u32 max_frame_size = adapter->max_frame_size;
+ struct e1000_hw *hw = &adapter->hw;
+ u16 pf_id = adapter->vfs_allocated_count;
+
+ if (pf_id) {
+ igb_set_vf_rlpml(adapter, max_frame_size, pf_id);
+ /* If we're in VMDQ or SR-IOV mode, then set global RLPML
+ * to our max jumbo frame size, in case we need to enable
+ * jumbo frames on one of the rings later.
+ * This will not pass over-length frames into the default
+ * queue because it's gated by the VMOLR.RLPML.
+ */
+ max_frame_size = MAX_JUMBO_FRAME_SIZE;
+ }
+
+ wr32(E1000_RLPML, max_frame_size);
+}
+
+static inline void igb_set_vmolr(struct igb_adapter *adapter,
+ int vfn, bool aupe)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 vmolr;
+
+ /* This register exists only on 82576 and newer so if we are older then
+ * we should exit and do nothing
+ */
+ if (hw->mac.type < e1000_82576)
+ return;
+
+ vmolr = rd32(E1000_VMOLR(vfn));
+ vmolr |= E1000_VMOLR_STRVLAN; /* Strip vlan tags */
+ if (hw->mac.type == e1000_i350) {
+ u32 dvmolr;
+
+ dvmolr = rd32(E1000_DVMOLR(vfn));
+ dvmolr |= E1000_DVMOLR_STRVLAN;
+ wr32(E1000_DVMOLR(vfn), dvmolr);
+ }
+ if (aupe)
+ vmolr |= E1000_VMOLR_AUPE; /* Accept untagged packets */
+ else
+ vmolr &= ~(E1000_VMOLR_AUPE); /* Tagged packets ONLY */
+
+ /* clear all bits that might not be set */
+ vmolr &= ~(E1000_VMOLR_BAM | E1000_VMOLR_RSSE);
+
+ if (adapter->rss_queues > 1 && vfn == adapter->vfs_allocated_count)
+ vmolr |= E1000_VMOLR_RSSE; /* enable RSS */
+ /* for VMDq only allow the VFs and pool 0 to accept broadcast and
+ * multicast packets
+ */
+ if (vfn <= adapter->vfs_allocated_count)
+ vmolr |= E1000_VMOLR_BAM; /* Accept broadcast */
+
+ wr32(E1000_VMOLR(vfn), vmolr);
+}
+
+/**
+ * igb_configure_rx_ring - Configure a receive ring after Reset
+ * @adapter: board private structure
+ * @ring: receive ring to be configured
+ *
+ * Configure the Rx unit of the MAC after a reset.
+ **/
+void igb_configure_rx_ring(struct igb_adapter *adapter,
+ struct igb_ring *ring)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u64 rdba = ring->dma;
+ int reg_idx = ring->reg_idx;
+ u32 srrctl = 0, rxdctl = 0;
+
+ /* disable the queue */
+ wr32(E1000_RXDCTL(reg_idx), 0);
+
+ /* Set DMA base address registers */
+ wr32(E1000_RDBAL(reg_idx),
+ rdba & 0x00000000ffffffffULL);
+ wr32(E1000_RDBAH(reg_idx), rdba >> 32);
+ wr32(E1000_RDLEN(reg_idx),
+ ring->count * sizeof(union e1000_adv_rx_desc));
+
+ /* initialize head and tail */
+ ring->tail = hw->hw_addr + E1000_RDT(reg_idx);
+ wr32(E1000_RDH(reg_idx), 0);
+ writel(0, ring->tail);
+
+ /* set descriptor configuration */
+ srrctl = IGB_RX_HDR_LEN << E1000_SRRCTL_BSIZEHDRSIZE_SHIFT;
+ srrctl |= IGB_RX_BUFSZ >> E1000_SRRCTL_BSIZEPKT_SHIFT;
+ srrctl |= E1000_SRRCTL_DESCTYPE_ADV_ONEBUF;
+ if (hw->mac.type >= e1000_82580)
+ srrctl |= E1000_SRRCTL_TIMESTAMP;
+ /* Only set Drop Enable if we are supporting multiple queues */
+ if (adapter->vfs_allocated_count || adapter->num_rx_queues > 1)
+ srrctl |= E1000_SRRCTL_DROP_EN;
+
+ wr32(E1000_SRRCTL(reg_idx), srrctl);
+
+ /* set filtering for VMDQ pools */
+ igb_set_vmolr(adapter, reg_idx & 0x7, true);
+
+ rxdctl |= IGB_RX_PTHRESH;
+ rxdctl |= IGB_RX_HTHRESH << 8;
+ rxdctl |= IGB_RX_WTHRESH << 16;
+
+ /* enable receive descriptor fetching */
+ rxdctl |= E1000_RXDCTL_QUEUE_ENABLE;
+ wr32(E1000_RXDCTL(reg_idx), rxdctl);
+}
+
+/**
+ * igb_configure_rx - Configure receive Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Rx unit of the MAC after a reset.
+ **/
+static void igb_configure_rx(struct igb_adapter *adapter)
+{
+ int i;
+
+ /* set UTA to appropriate mode */
+ igb_set_uta(adapter);
+
+ /* set the correct pool for the PF default MAC address in entry 0 */
+ igb_rar_set_qsel(adapter, adapter->hw.mac.addr, 0,
+ adapter->vfs_allocated_count);
+
+ /* Setup the HW Rx Head and Tail Descriptor Pointers and
+ * the Base and Length of the Rx Descriptor Ring
+ */
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ igb_configure_rx_ring(adapter, adapter->rx_ring[i]);
+}
+
+/**
+ * igb_free_tx_resources - Free Tx Resources per Queue
+ * @tx_ring: Tx descriptor ring for a specific queue
+ *
+ * Free all transmit software resources
+ **/
+void igb_free_tx_resources(struct igb_ring *tx_ring)
+{
+ igb_clean_tx_ring(tx_ring);
+
+ vfree(tx_ring->tx_buffer_info);
+ tx_ring->tx_buffer_info = NULL;
+
+ /* if not set, then don't free */
+ if (!tx_ring->desc)
+ return;
+
+ dma_free_coherent(tx_ring->dev, tx_ring->size,
+ tx_ring->desc, tx_ring->dma);
+
+ tx_ring->desc = NULL;
+}
+
+/**
+ * igb_free_all_tx_resources - Free Tx Resources for All Queues
+ * @adapter: board private structure
+ *
+ * Free all transmit software resources
+ **/
+static void igb_free_all_tx_resources(struct igb_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ if (adapter->tx_ring[i])
+ igb_free_tx_resources(adapter->tx_ring[i]);
+}
+
+void igb_unmap_and_free_tx_resource(struct igb_ring *ring,
+ struct igb_tx_buffer *tx_buffer)
+{
+ if (tx_buffer->skb) {
+ dev_kfree_skb_any(tx_buffer->skb);
+ if (dma_unmap_len(tx_buffer, len))
+ dma_unmap_single(ring->dev,
+ dma_unmap_addr(tx_buffer, dma),
+ dma_unmap_len(tx_buffer, len),
+ DMA_TO_DEVICE);
+ } else if (dma_unmap_len(tx_buffer, len)) {
+ dma_unmap_page(ring->dev,
+ dma_unmap_addr(tx_buffer, dma),
+ dma_unmap_len(tx_buffer, len),
+ DMA_TO_DEVICE);
+ }
+ tx_buffer->next_to_watch = NULL;
+ tx_buffer->skb = NULL;
+ dma_unmap_len_set(tx_buffer, len, 0);
+ /* buffer_info must be completely set up in the transmit path */
+}
+
+/**
+ * igb_clean_tx_ring - Free Tx Buffers
+ * @tx_ring: ring to be cleaned
+ **/
+static void igb_clean_tx_ring(struct igb_ring *tx_ring)
+{
+ struct igb_tx_buffer *buffer_info;
+ unsigned long size;
+ u16 i;
+
+ if (!tx_ring->tx_buffer_info)
+ return;
+ /* Free all the Tx ring sk_buffs */
+
+ for (i = 0; i < tx_ring->count; i++) {
+ buffer_info = &tx_ring->tx_buffer_info[i];
+ igb_unmap_and_free_tx_resource(tx_ring, buffer_info);
+ }
+
+ netdev_tx_reset_queue(txring_txq(tx_ring));
+
+ size = sizeof(struct igb_tx_buffer) * tx_ring->count;
+ memset(tx_ring->tx_buffer_info, 0, size);
+
+ /* Zero out the descriptor ring */
+ memset(tx_ring->desc, 0, tx_ring->size);
+
+ tx_ring->next_to_use = 0;
+ tx_ring->next_to_clean = 0;
+}
+
+/**
+ * igb_clean_all_tx_rings - Free Tx Buffers for all queues
+ * @adapter: board private structure
+ **/
+static void igb_clean_all_tx_rings(struct igb_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ if (adapter->tx_ring[i])
+ igb_clean_tx_ring(adapter->tx_ring[i]);
+}
+
+/**
+ * igb_free_rx_resources - Free Rx Resources
+ * @rx_ring: ring to clean the resources from
+ *
+ * Free all receive software resources
+ **/
+void igb_free_rx_resources(struct igb_ring *rx_ring)
+{
+ igb_clean_rx_ring(rx_ring);
+
+ vfree(rx_ring->rx_buffer_info);
+ rx_ring->rx_buffer_info = NULL;
+
+ /* if not set, then don't free */
+ if (!rx_ring->desc)
+ return;
+
+ dma_free_coherent(rx_ring->dev, rx_ring->size,
+ rx_ring->desc, rx_ring->dma);
+
+ rx_ring->desc = NULL;
+}
+
+/**
+ * igb_free_all_rx_resources - Free Rx Resources for All Queues
+ * @adapter: board private structure
+ *
+ * Free all receive software resources
+ **/
+static void igb_free_all_rx_resources(struct igb_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ if (adapter->rx_ring[i])
+ igb_free_rx_resources(adapter->rx_ring[i]);
+}
+
+/**
+ * igb_clean_rx_ring - Free Rx Buffers per Queue
+ * @rx_ring: ring to free buffers from
+ **/
+static void igb_clean_rx_ring(struct igb_ring *rx_ring)
+{
+ unsigned long size;
+ u16 i;
+
+ if (rx_ring->skb)
+ dev_kfree_skb(rx_ring->skb);
+ rx_ring->skb = NULL;
+
+ if (!rx_ring->rx_buffer_info)
+ return;
+
+ /* Free all the Rx ring sk_buffs */
+ for (i = 0; i < rx_ring->count; i++) {
+ struct igb_rx_buffer *buffer_info = &rx_ring->rx_buffer_info[i];
+
+ if (!buffer_info->page)
+ continue;
+
+ dma_unmap_page(rx_ring->dev,
+ buffer_info->dma,
+ PAGE_SIZE,
+ DMA_FROM_DEVICE);
+ __free_page(buffer_info->page);
+
+ buffer_info->page = NULL;
+ }
+
+ size = sizeof(struct igb_rx_buffer) * rx_ring->count;
+ memset(rx_ring->rx_buffer_info, 0, size);
+
+ /* Zero out the descriptor ring */
+ memset(rx_ring->desc, 0, rx_ring->size);
+
+ rx_ring->next_to_alloc = 0;
+ rx_ring->next_to_clean = 0;
+ rx_ring->next_to_use = 0;
+}
+
+/**
+ * igb_clean_all_rx_rings - Free Rx Buffers for all queues
+ * @adapter: board private structure
+ **/
+static void igb_clean_all_rx_rings(struct igb_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ if (adapter->rx_ring[i])
+ igb_clean_rx_ring(adapter->rx_ring[i]);
+}
+
+/**
+ * igb_set_mac - Change the Ethernet Address of the NIC
+ * @netdev: network interface device structure
+ * @p: pointer to an address structure
+ *
+ * Returns 0 on success, negative on failure
+ **/
+static int igb_set_mac(struct net_device *netdev, void *p)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+ memcpy(hw->mac.addr, addr->sa_data, netdev->addr_len);
+
+ /* set the correct pool for the new PF MAC address in entry 0 */
+ igb_rar_set_qsel(adapter, hw->mac.addr, 0,
+ adapter->vfs_allocated_count);
+
+ return 0;
+}
+
+/**
+ * igb_write_mc_addr_list - write multicast addresses to MTA
+ * @netdev: network interface device structure
+ *
+ * Writes multicast address list to the MTA hash table.
+ * Returns: -ENOMEM on failure
+ * 0 on no addresses written
+ * X on writing X addresses to MTA
+ **/
+static int igb_write_mc_addr_list(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct netdev_hw_addr *ha;
+ u8 *mta_list;
+ int i;
+
+ if (netdev_mc_empty(netdev)) {
+ /* nothing to program, so clear mc list */
+ igb_update_mc_addr_list(hw, NULL, 0);
+ igb_restore_vf_multicasts(adapter);
+ return 0;
+ }
+
+ mta_list = kzalloc(netdev_mc_count(netdev) * 6, GFP_ATOMIC);
+ if (!mta_list)
+ return -ENOMEM;
+
+ /* The shared function expects a packed array of only addresses. */
+ i = 0;
+ netdev_for_each_mc_addr(ha, netdev)
+ memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN);
+
+ igb_update_mc_addr_list(hw, mta_list, i);
+ kfree(mta_list);
+
+ return netdev_mc_count(netdev);
+}
+
+/**
+ * igb_write_uc_addr_list - write unicast addresses to RAR table
+ * @netdev: network interface device structure
+ *
+ * Writes unicast address list to the RAR table.
+ * Returns: -ENOMEM on failure/insufficient address space
+ * 0 on no addresses written
+ * X on writing X addresses to the RAR table
+ **/
+static int igb_write_uc_addr_list(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ unsigned int vfn = adapter->vfs_allocated_count;
+ unsigned int rar_entries = hw->mac.rar_entry_count - (vfn + 1);
+ int count = 0;
+
+ /* return ENOMEM indicating insufficient memory for addresses */
+ if (netdev_uc_count(netdev) > rar_entries)
+ return -ENOMEM;
+
+ if (!netdev_uc_empty(netdev) && rar_entries) {
+ struct netdev_hw_addr *ha;
+
+ netdev_for_each_uc_addr(ha, netdev) {
+ if (!rar_entries)
+ break;
+ igb_rar_set_qsel(adapter, ha->addr,
+ rar_entries--,
+ vfn);
+ count++;
+ }
+ }
+ /* write the addresses in reverse order to avoid write combining */
+ for (; rar_entries > 0 ; rar_entries--) {
+ wr32(E1000_RAH(rar_entries), 0);
+ wr32(E1000_RAL(rar_entries), 0);
+ }
+ wrfl();
+
+ return count;
+}
+
+/**
+ * igb_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set
+ * @netdev: network interface device structure
+ *
+ * The set_rx_mode entry point is called whenever the unicast or multicast
+ * address lists or the network interface flags are updated. This routine is
+ * responsible for configuring the hardware for proper unicast, multicast,
+ * promiscuous mode, and all-multi behavior.
+ **/
+static void igb_set_rx_mode(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ unsigned int vfn = adapter->vfs_allocated_count;
+ u32 rctl, vmolr = 0;
+ int count;
+
+ /* Check for Promiscuous and All Multicast modes */
+ rctl = rd32(E1000_RCTL);
+
+ /* clear the effected bits */
+ rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE | E1000_RCTL_VFE);
+
+ if (netdev->flags & IFF_PROMISC) {
+ /* retain VLAN HW filtering if in VT mode */
+ if (adapter->vfs_allocated_count)
+ rctl |= E1000_RCTL_VFE;
+ rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
+ vmolr |= (E1000_VMOLR_ROPE | E1000_VMOLR_MPME);
+ } else {
+ if (netdev->flags & IFF_ALLMULTI) {
+ rctl |= E1000_RCTL_MPE;
+ vmolr |= E1000_VMOLR_MPME;
+ } else {
+ /* Write addresses to the MTA, if the attempt fails
+ * then we should just turn on promiscuous mode so
+ * that we can at least receive multicast traffic
+ */
+ count = igb_write_mc_addr_list(netdev);
+ if (count < 0) {
+ rctl |= E1000_RCTL_MPE;
+ vmolr |= E1000_VMOLR_MPME;
+ } else if (count) {
+ vmolr |= E1000_VMOLR_ROMPE;
+ }
+ }
+ /* Write addresses to available RAR registers, if there is not
+ * sufficient space to store all the addresses then enable
+ * unicast promiscuous mode
+ */
+ count = igb_write_uc_addr_list(netdev);
+ if (count < 0) {
+ rctl |= E1000_RCTL_UPE;
+ vmolr |= E1000_VMOLR_ROPE;
+ }
+ rctl |= E1000_RCTL_VFE;
+ }
+ wr32(E1000_RCTL, rctl);
+
+ /* In order to support SR-IOV and eventually VMDq it is necessary to set
+ * the VMOLR to enable the appropriate modes. Without this workaround
+ * we will have issues with VLAN tag stripping not being done for frames
+ * that are only arriving because we are the default pool
+ */
+ if ((hw->mac.type < e1000_82576) || (hw->mac.type > e1000_i350))
+ return;
+
+ vmolr |= rd32(E1000_VMOLR(vfn)) &
+ ~(E1000_VMOLR_ROPE | E1000_VMOLR_MPME | E1000_VMOLR_ROMPE);
+ wr32(E1000_VMOLR(vfn), vmolr);
+ igb_restore_vf_multicasts(adapter);
+}
+
+static void igb_check_wvbr(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 wvbr = 0;
+
+ switch (hw->mac.type) {
+ case e1000_82576:
+ case e1000_i350:
+ wvbr = rd32(E1000_WVBR);
+ if (!wvbr)
+ return;
+ break;
+ default:
+ break;
+ }
+
+ adapter->wvbr |= wvbr;
+}
+
+#define IGB_STAGGERED_QUEUE_OFFSET 8
+
+static void igb_spoof_check(struct igb_adapter *adapter)
+{
+ int j;
+
+ if (!adapter->wvbr)
+ return;
+
+ for (j = 0; j < adapter->vfs_allocated_count; j++) {
+ if (adapter->wvbr & (1 << j) ||
+ adapter->wvbr & (1 << (j + IGB_STAGGERED_QUEUE_OFFSET))) {
+ dev_warn(&adapter->pdev->dev,
+ "Spoof event(s) detected on VF %d\n", j);
+ adapter->wvbr &=
+ ~((1 << j) |
+ (1 << (j + IGB_STAGGERED_QUEUE_OFFSET)));
+ }
+ }
+}
+
+/* Need to wait a few seconds after link up to get diagnostic information from
+ * the phy
+ */
+static void igb_update_phy_info(unsigned long data)
+{
+ struct igb_adapter *adapter = (struct igb_adapter *) data;
+ igb_get_phy_info(&adapter->hw);
+}
+
+/**
+ * igb_has_link - check shared code for link and determine up/down
+ * @adapter: pointer to driver private info
+ **/
+bool igb_has_link(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ bool link_active = false;
+
+ /* get_link_status is set on LSC (link status) interrupt or
+ * rx sequence error interrupt. get_link_status will stay
+ * false until the e1000_check_for_link establishes link
+ * for copper adapters ONLY
+ */
+ switch (hw->phy.media_type) {
+ case e1000_media_type_copper:
+ if (!hw->mac.get_link_status)
+ return true;
+ case e1000_media_type_internal_serdes:
+ hw->mac.ops.check_for_link(hw);
+ link_active = !hw->mac.get_link_status;
+ break;
+ default:
+ case e1000_media_type_unknown:
+ break;
+ }
+
+ if (((hw->mac.type == e1000_i210) ||
+ (hw->mac.type == e1000_i211)) &&
+ (hw->phy.id == I210_I_PHY_ID)) {
+ if (!netif_carrier_ok(adapter->netdev)) {
+ adapter->flags &= ~IGB_FLAG_NEED_LINK_UPDATE;
+ } else if (!(adapter->flags & IGB_FLAG_NEED_LINK_UPDATE)) {
+ adapter->flags |= IGB_FLAG_NEED_LINK_UPDATE;
+ adapter->link_check_timeout = jiffies;
+ }
+ }
+
+ return link_active;
+}
+
+static bool igb_thermal_sensor_event(struct e1000_hw *hw, u32 event)
+{
+ bool ret = false;
+ u32 ctrl_ext, thstat;
+
+ /* check for thermal sensor event on i350 copper only */
+ if (hw->mac.type == e1000_i350) {
+ thstat = rd32(E1000_THSTAT);
+ ctrl_ext = rd32(E1000_CTRL_EXT);
+
+ if ((hw->phy.media_type == e1000_media_type_copper) &&
+ !(ctrl_ext & E1000_CTRL_EXT_LINK_MODE_SGMII))
+ ret = !!(thstat & event);
+ }
+
+ return ret;
+}
+
+/**
+ * igb_check_lvmmc - check for malformed packets received
+ * and indicated in LVMMC register
+ * @adapter: pointer to adapter
+ **/
+static void igb_check_lvmmc(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 lvmmc;
+
+ lvmmc = rd32(E1000_LVMMC);
+ if (lvmmc) {
+ if (unlikely(net_ratelimit())) {
+ netdev_warn(adapter->netdev,
+ "malformed Tx packet detected and dropped, LVMMC:0x%08x\n",
+ lvmmc);
+ }
+ }
+}
+
+/**
+ * igb_watchdog - Timer Call-back
+ * @data: pointer to adapter cast into an unsigned long
+ **/
+static void igb_watchdog(unsigned long data)
+{
+ struct igb_adapter *adapter = (struct igb_adapter *)data;
+ /* Do the rest outside of interrupt context */
+ schedule_work(&adapter->watchdog_task);
+}
+
+static void igb_watchdog_task(struct work_struct *work)
+{
+ struct igb_adapter *adapter = container_of(work,
+ struct igb_adapter,
+ watchdog_task);
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_phy_info *phy = &hw->phy;
+ struct net_device *netdev = adapter->netdev;
+ u32 link;
+ int i;
+ u32 connsw;
+
+ link = igb_has_link(adapter);
+
+ if (adapter->flags & IGB_FLAG_NEED_LINK_UPDATE) {
+ if (time_after(jiffies, (adapter->link_check_timeout + HZ)))
+ adapter->flags &= ~IGB_FLAG_NEED_LINK_UPDATE;
+ else
+ link = false;
+ }
+
+ /* Force link down if we have fiber to swap to */
+ if (adapter->flags & IGB_FLAG_MAS_ENABLE) {
+ if (hw->phy.media_type == e1000_media_type_copper) {
+ connsw = rd32(E1000_CONNSW);
+ if (!(connsw & E1000_CONNSW_AUTOSENSE_EN))
+ link = 0;
+ }
+ }
+ if (link) {
+ /* Perform a reset if the media type changed. */
+ if (hw->dev_spec._82575.media_changed) {
+ hw->dev_spec._82575.media_changed = false;
+ adapter->flags |= IGB_FLAG_MEDIA_RESET;
+ igb_reset(adapter);
+ }
+ /* Cancel scheduled suspend requests. */
+ pm_runtime_resume(netdev->dev.parent);
+
+ if (!netif_carrier_ok(netdev)) {
+ u32 ctrl;
+
+ hw->mac.ops.get_speed_and_duplex(hw,
+ &adapter->link_speed,
+ &adapter->link_duplex);
+
+ ctrl = rd32(E1000_CTRL);
+ /* Links status message must follow this format */
+ netdev_info(netdev,
+ "igb: %s NIC Link is Up %d Mbps %s Duplex, Flow Control: %s\n",
+ netdev->name,
+ adapter->link_speed,
+ adapter->link_duplex == FULL_DUPLEX ?
+ "Full" : "Half",
+ (ctrl & E1000_CTRL_TFCE) &&
+ (ctrl & E1000_CTRL_RFCE) ? "RX/TX" :
+ (ctrl & E1000_CTRL_RFCE) ? "RX" :
+ (ctrl & E1000_CTRL_TFCE) ? "TX" : "None");
+
+ /* disable EEE if enabled */
+ if ((adapter->flags & IGB_FLAG_EEE) &&
+ (adapter->link_duplex == HALF_DUPLEX)) {
+ dev_info(&adapter->pdev->dev,
+ "EEE Disabled: unsupported at half duplex. Re-enable using ethtool when at full duplex.\n");
+ adapter->hw.dev_spec._82575.eee_disable = true;
+ adapter->flags &= ~IGB_FLAG_EEE;
+ }
+
+ /* check if SmartSpeed worked */
+ igb_check_downshift(hw);
+ if (phy->speed_downgraded)
+ netdev_warn(netdev, "Link Speed was downgraded by SmartSpeed\n");
+
+ /* check for thermal sensor event */
+ if (igb_thermal_sensor_event(hw,
+ E1000_THSTAT_LINK_THROTTLE))
+ netdev_info(netdev, "The network adapter link speed was downshifted because it overheated\n");
+
+ /* adjust timeout factor according to speed/duplex */
+ adapter->tx_timeout_factor = 1;
+ switch (adapter->link_speed) {
+ case SPEED_10:
+ adapter->tx_timeout_factor = 14;
+ break;
+ case SPEED_100:
+ /* maybe add some timeout factor ? */
+ break;
+ }
+
+ netif_carrier_on(netdev);
+
+ igb_ping_all_vfs(adapter);
+ igb_check_vf_rate_limit(adapter);
+
+ /* link state has changed, schedule phy info update */
+ if (!test_bit(__IGB_DOWN, &adapter->state))
+ mod_timer(&adapter->phy_info_timer,
+ round_jiffies(jiffies + 2 * HZ));
+ }
+ } else {
+ if (netif_carrier_ok(netdev)) {
+ adapter->link_speed = 0;
+ adapter->link_duplex = 0;
+
+ /* check for thermal sensor event */
+ if (igb_thermal_sensor_event(hw,
+ E1000_THSTAT_PWR_DOWN)) {
+ netdev_err(netdev, "The network adapter was stopped because it overheated\n");
+ }
+
+ /* Links status message must follow this format */
+ netdev_info(netdev, "igb: %s NIC Link is Down\n",
+ netdev->name);
+ netif_carrier_off(netdev);
+
+ igb_ping_all_vfs(adapter);
+
+ /* link state has changed, schedule phy info update */
+ if (!test_bit(__IGB_DOWN, &adapter->state))
+ mod_timer(&adapter->phy_info_timer,
+ round_jiffies(jiffies + 2 * HZ));
+
+ /* link is down, time to check for alternate media */
+ if (adapter->flags & IGB_FLAG_MAS_ENABLE) {
+ igb_check_swap_media(adapter);
+ if (adapter->flags & IGB_FLAG_MEDIA_RESET) {
+ schedule_work(&adapter->reset_task);
+ /* return immediately */
+ return;
+ }
+ }
+ pm_schedule_suspend(netdev->dev.parent,
+ MSEC_PER_SEC * 5);
+
+ /* also check for alternate media here */
+ } else if (!netif_carrier_ok(netdev) &&
+ (adapter->flags & IGB_FLAG_MAS_ENABLE)) {
+ igb_check_swap_media(adapter);
+ if (adapter->flags & IGB_FLAG_MEDIA_RESET) {
+ schedule_work(&adapter->reset_task);
+ /* return immediately */
+ return;
+ }
+ }
+ }
+
+ spin_lock(&adapter->stats64_lock);
+ igb_update_stats(adapter, &adapter->stats64);
+ spin_unlock(&adapter->stats64_lock);
+
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ struct igb_ring *tx_ring = adapter->tx_ring[i];
+ if (!netif_carrier_ok(netdev)) {
+ /* We've lost link, so the controller stops DMA,
+ * but we've got queued Tx work that's never going
+ * to get done, so reset controller to flush Tx.
+ * (Do the reset outside of interrupt context).
+ */
+ if (igb_desc_unused(tx_ring) + 1 < tx_ring->count) {
+ adapter->tx_timeout_count++;
+ schedule_work(&adapter->reset_task);
+ /* return immediately since reset is imminent */
+ return;
+ }
+ }
+
+ /* Force detection of hung controller every watchdog period */
+ set_bit(IGB_RING_FLAG_TX_DETECT_HANG, &tx_ring->flags);
+ }
+
+ /* Cause software interrupt to ensure Rx ring is cleaned */
+ if (adapter->flags & IGB_FLAG_HAS_MSIX) {
+ u32 eics = 0;
+
+ for (i = 0; i < adapter->num_q_vectors; i++)
+ eics |= adapter->q_vector[i]->eims_value;
+ wr32(E1000_EICS, eics);
+ } else {
+ wr32(E1000_ICS, E1000_ICS_RXDMT0);
+ }
+
+ igb_spoof_check(adapter);
+ igb_ptp_rx_hang(adapter);
+
+ /* Check LVMMC register on i350/i354 only */
+ if ((adapter->hw.mac.type == e1000_i350) ||
+ (adapter->hw.mac.type == e1000_i354))
+ igb_check_lvmmc(adapter);
+
+ /* Reset the timer */
+ if (!test_bit(__IGB_DOWN, &adapter->state)) {
+ if (adapter->flags & IGB_FLAG_NEED_LINK_UPDATE)
+ mod_timer(&adapter->watchdog_timer,
+ round_jiffies(jiffies + HZ));
+ else
+ mod_timer(&adapter->watchdog_timer,
+ round_jiffies(jiffies + 2 * HZ));
+ }
+}
+
+enum latency_range {
+ lowest_latency = 0,
+ low_latency = 1,
+ bulk_latency = 2,
+ latency_invalid = 255
+};
+
+/**
+ * igb_update_ring_itr - update the dynamic ITR value based on packet size
+ * @q_vector: pointer to q_vector
+ *
+ * Stores a new ITR value based on strictly on packet size. This
+ * algorithm is less sophisticated than that used in igb_update_itr,
+ * due to the difficulty of synchronizing statistics across multiple
+ * receive rings. The divisors and thresholds used by this function
+ * were determined based on theoretical maximum wire speed and testing
+ * data, in order to minimize response time while increasing bulk
+ * throughput.
+ * This functionality is controlled by ethtool's coalescing settings.
+ * NOTE: This function is called only when operating in a multiqueue
+ * receive environment.
+ **/
+static void igb_update_ring_itr(struct igb_q_vector *q_vector)
+{
+ int new_val = q_vector->itr_val;
+ int avg_wire_size = 0;
+ struct igb_adapter *adapter = q_vector->adapter;
+ unsigned int packets;
+
+ /* For non-gigabit speeds, just fix the interrupt rate at 4000
+ * ints/sec - ITR timer value of 120 ticks.
+ */
+ if (adapter->link_speed != SPEED_1000) {
+ new_val = IGB_4K_ITR;
+ goto set_itr_val;
+ }
+
+ packets = q_vector->rx.total_packets;
+ if (packets)
+ avg_wire_size = q_vector->rx.total_bytes / packets;
+
+ packets = q_vector->tx.total_packets;
+ if (packets)
+ avg_wire_size = max_t(u32, avg_wire_size,
+ q_vector->tx.total_bytes / packets);
+
+ /* if avg_wire_size isn't set no work was done */
+ if (!avg_wire_size)
+ goto clear_counts;
+
+ /* Add 24 bytes to size to account for CRC, preamble, and gap */
+ avg_wire_size += 24;
+
+ /* Don't starve jumbo frames */
+ avg_wire_size = min(avg_wire_size, 3000);
+
+ /* Give a little boost to mid-size frames */
+ if ((avg_wire_size > 300) && (avg_wire_size < 1200))
+ new_val = avg_wire_size / 3;
+ else
+ new_val = avg_wire_size / 2;
+
+ /* conservative mode (itr 3) eliminates the lowest_latency setting */
+ if (new_val < IGB_20K_ITR &&
+ ((q_vector->rx.ring && adapter->rx_itr_setting == 3) ||
+ (!q_vector->rx.ring && adapter->tx_itr_setting == 3)))
+ new_val = IGB_20K_ITR;
+
+set_itr_val:
+ if (new_val != q_vector->itr_val) {
+ q_vector->itr_val = new_val;
+ q_vector->set_itr = 1;
+ }
+clear_counts:
+ q_vector->rx.total_bytes = 0;
+ q_vector->rx.total_packets = 0;
+ q_vector->tx.total_bytes = 0;
+ q_vector->tx.total_packets = 0;
+}
+
+/**
+ * igb_update_itr - update the dynamic ITR value based on statistics
+ * @q_vector: pointer to q_vector
+ * @ring_container: ring info to update the itr for
+ *
+ * Stores a new ITR value based on packets and byte
+ * counts during the last interrupt. The advantage of per interrupt
+ * computation is faster updates and more accurate ITR for the current
+ * traffic pattern. Constants in this function were computed
+ * based on theoretical maximum wire speed and thresholds were set based
+ * on testing data as well as attempting to minimize response time
+ * while increasing bulk throughput.
+ * This functionality is controlled by ethtool's coalescing settings.
+ * NOTE: These calculations are only valid when operating in a single-
+ * queue environment.
+ **/
+static void igb_update_itr(struct igb_q_vector *q_vector,
+ struct igb_ring_container *ring_container)
+{
+ unsigned int packets = ring_container->total_packets;
+ unsigned int bytes = ring_container->total_bytes;
+ u8 itrval = ring_container->itr;
+
+ /* no packets, exit with status unchanged */
+ if (packets == 0)
+ return;
+
+ switch (itrval) {
+ case lowest_latency:
+ /* handle TSO and jumbo frames */
+ if (bytes/packets > 8000)
+ itrval = bulk_latency;
+ else if ((packets < 5) && (bytes > 512))
+ itrval = low_latency;
+ break;
+ case low_latency: /* 50 usec aka 20000 ints/s */
+ if (bytes > 10000) {
+ /* this if handles the TSO accounting */
+ if (bytes/packets > 8000)
+ itrval = bulk_latency;
+ else if ((packets < 10) || ((bytes/packets) > 1200))
+ itrval = bulk_latency;
+ else if ((packets > 35))
+ itrval = lowest_latency;
+ } else if (bytes/packets > 2000) {
+ itrval = bulk_latency;
+ } else if (packets <= 2 && bytes < 512) {
+ itrval = lowest_latency;
+ }
+ break;
+ case bulk_latency: /* 250 usec aka 4000 ints/s */
+ if (bytes > 25000) {
+ if (packets > 35)
+ itrval = low_latency;
+ } else if (bytes < 1500) {
+ itrval = low_latency;
+ }
+ break;
+ }
+
+ /* clear work counters since we have the values we need */
+ ring_container->total_bytes = 0;
+ ring_container->total_packets = 0;
+
+ /* write updated itr to ring container */
+ ring_container->itr = itrval;
+}
+
+static void igb_set_itr(struct igb_q_vector *q_vector)
+{
+ struct igb_adapter *adapter = q_vector->adapter;
+ u32 new_itr = q_vector->itr_val;
+ u8 current_itr = 0;
+
+ /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
+ if (adapter->link_speed != SPEED_1000) {
+ current_itr = 0;
+ new_itr = IGB_4K_ITR;
+ goto set_itr_now;
+ }
+
+ igb_update_itr(q_vector, &q_vector->tx);
+ igb_update_itr(q_vector, &q_vector->rx);
+
+ current_itr = max(q_vector->rx.itr, q_vector->tx.itr);
+
+ /* conservative mode (itr 3) eliminates the lowest_latency setting */
+ if (current_itr == lowest_latency &&
+ ((q_vector->rx.ring && adapter->rx_itr_setting == 3) ||
+ (!q_vector->rx.ring && adapter->tx_itr_setting == 3)))
+ current_itr = low_latency;
+
+ switch (current_itr) {
+ /* counts and packets in update_itr are dependent on these numbers */
+ case lowest_latency:
+ new_itr = IGB_70K_ITR; /* 70,000 ints/sec */
+ break;
+ case low_latency:
+ new_itr = IGB_20K_ITR; /* 20,000 ints/sec */
+ break;
+ case bulk_latency:
+ new_itr = IGB_4K_ITR; /* 4,000 ints/sec */
+ break;
+ default:
+ break;
+ }
+
+set_itr_now:
+ if (new_itr != q_vector->itr_val) {
+ /* this attempts to bias the interrupt rate towards Bulk
+ * by adding intermediate steps when interrupt rate is
+ * increasing
+ */
+ new_itr = new_itr > q_vector->itr_val ?
+ max((new_itr * q_vector->itr_val) /
+ (new_itr + (q_vector->itr_val >> 2)),
+ new_itr) : new_itr;
+ /* Don't write the value here; it resets the adapter's
+ * internal timer, and causes us to delay far longer than
+ * we should between interrupts. Instead, we write the ITR
+ * value at the beginning of the next interrupt so the timing
+ * ends up being correct.
+ */
+ q_vector->itr_val = new_itr;
+ q_vector->set_itr = 1;
+ }
+}
+
+static void igb_tx_ctxtdesc(struct igb_ring *tx_ring, u32 vlan_macip_lens,
+ u32 type_tucmd, u32 mss_l4len_idx)
+{
+ struct e1000_adv_tx_context_desc *context_desc;
+ u16 i = tx_ring->next_to_use;
+
+ context_desc = IGB_TX_CTXTDESC(tx_ring, i);
+
+ i++;
+ tx_ring->next_to_use = (i < tx_ring->count) ? i : 0;
+
+ /* set bits to identify this as an advanced context descriptor */
+ type_tucmd |= E1000_TXD_CMD_DEXT | E1000_ADVTXD_DTYP_CTXT;
+
+ /* For 82575, context index must be unique per ring. */
+ if (test_bit(IGB_RING_FLAG_TX_CTX_IDX, &tx_ring->flags))
+ mss_l4len_idx |= tx_ring->reg_idx << 4;
+
+ context_desc->vlan_macip_lens = cpu_to_le32(vlan_macip_lens);
+ context_desc->seqnum_seed = 0;
+ context_desc->type_tucmd_mlhl = cpu_to_le32(type_tucmd);
+ context_desc->mss_l4len_idx = cpu_to_le32(mss_l4len_idx);
+}
+
+static int igb_tso(struct igb_ring *tx_ring,
+ struct igb_tx_buffer *first,
+ u8 *hdr_len)
+{
+ struct sk_buff *skb = first->skb;
+ u32 vlan_macip_lens, type_tucmd;
+ u32 mss_l4len_idx, l4len;
+ int err;
+
+ if (skb->ip_summed != CHECKSUM_PARTIAL)
+ return 0;
+
+ if (!skb_is_gso(skb))
+ return 0;
+
+ err = skb_cow_head(skb, 0);
+ if (err < 0)
+ return err;
+
+ /* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */
+ type_tucmd = E1000_ADVTXD_TUCMD_L4T_TCP;
+
+ if (first->protocol == htons(ETH_P_IP)) {
+ struct iphdr *iph = ip_hdr(skb);
+ iph->tot_len = 0;
+ iph->check = 0;
+ tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
+ iph->daddr, 0,
+ IPPROTO_TCP,
+ 0);
+ type_tucmd |= E1000_ADVTXD_TUCMD_IPV4;
+ first->tx_flags |= IGB_TX_FLAGS_TSO |
+ IGB_TX_FLAGS_CSUM |
+ IGB_TX_FLAGS_IPV4;
+ } else if (skb_is_gso_v6(skb)) {
+ ipv6_hdr(skb)->payload_len = 0;
+ tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
+ &ipv6_hdr(skb)->daddr,
+ 0, IPPROTO_TCP, 0);
+ first->tx_flags |= IGB_TX_FLAGS_TSO |
+ IGB_TX_FLAGS_CSUM;
+ }
+
+ /* compute header lengths */
+ l4len = tcp_hdrlen(skb);
+ *hdr_len = skb_transport_offset(skb) + l4len;
+
+ /* update gso size and bytecount with header size */
+ first->gso_segs = skb_shinfo(skb)->gso_segs;
+ first->bytecount += (first->gso_segs - 1) * *hdr_len;
+
+ /* MSS L4LEN IDX */
+ mss_l4len_idx = l4len << E1000_ADVTXD_L4LEN_SHIFT;
+ mss_l4len_idx |= skb_shinfo(skb)->gso_size << E1000_ADVTXD_MSS_SHIFT;
+
+ /* VLAN MACLEN IPLEN */
+ vlan_macip_lens = skb_network_header_len(skb);
+ vlan_macip_lens |= skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT;
+ vlan_macip_lens |= first->tx_flags & IGB_TX_FLAGS_VLAN_MASK;
+
+ igb_tx_ctxtdesc(tx_ring, vlan_macip_lens, type_tucmd, mss_l4len_idx);
+
+ return 1;
+}
+
+static void igb_tx_csum(struct igb_ring *tx_ring, struct igb_tx_buffer *first)
+{
+ struct sk_buff *skb = first->skb;
+ u32 vlan_macip_lens = 0;
+ u32 mss_l4len_idx = 0;
+ u32 type_tucmd = 0;
+
+ if (skb->ip_summed != CHECKSUM_PARTIAL) {
+ if (!(first->tx_flags & IGB_TX_FLAGS_VLAN))
+ return;
+ } else {
+ u8 l4_hdr = 0;
+
+ switch (first->protocol) {
+ case htons(ETH_P_IP):
+ vlan_macip_lens |= skb_network_header_len(skb);
+ type_tucmd |= E1000_ADVTXD_TUCMD_IPV4;
+ l4_hdr = ip_hdr(skb)->protocol;
+ break;
+ case htons(ETH_P_IPV6):
+ vlan_macip_lens |= skb_network_header_len(skb);
+ l4_hdr = ipv6_hdr(skb)->nexthdr;
+ break;
+ default:
+ if (unlikely(net_ratelimit())) {
+ dev_warn(tx_ring->dev,
+ "partial checksum but proto=%x!\n",
+ first->protocol);
+ }
+ break;
+ }
+
+ switch (l4_hdr) {
+ case IPPROTO_TCP:
+ type_tucmd |= E1000_ADVTXD_TUCMD_L4T_TCP;
+ mss_l4len_idx = tcp_hdrlen(skb) <<
+ E1000_ADVTXD_L4LEN_SHIFT;
+ break;
+ case IPPROTO_SCTP:
+ type_tucmd |= E1000_ADVTXD_TUCMD_L4T_SCTP;
+ mss_l4len_idx = sizeof(struct sctphdr) <<
+ E1000_ADVTXD_L4LEN_SHIFT;
+ break;
+ case IPPROTO_UDP:
+ mss_l4len_idx = sizeof(struct udphdr) <<
+ E1000_ADVTXD_L4LEN_SHIFT;
+ break;
+ default:
+ if (unlikely(net_ratelimit())) {
+ dev_warn(tx_ring->dev,
+ "partial checksum but l4 proto=%x!\n",
+ l4_hdr);
+ }
+ break;
+ }
+
+ /* update TX checksum flag */
+ first->tx_flags |= IGB_TX_FLAGS_CSUM;
+ }
+
+ vlan_macip_lens |= skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT;
+ vlan_macip_lens |= first->tx_flags & IGB_TX_FLAGS_VLAN_MASK;
+
+ igb_tx_ctxtdesc(tx_ring, vlan_macip_lens, type_tucmd, mss_l4len_idx);
+}
+
+#define IGB_SET_FLAG(_input, _flag, _result) \
+ ((_flag <= _result) ? \
+ ((u32)(_input & _flag) * (_result / _flag)) : \
+ ((u32)(_input & _flag) / (_flag / _result)))
+
+static u32 igb_tx_cmd_type(struct sk_buff *skb, u32 tx_flags)
+{
+ /* set type for advanced descriptor with frame checksum insertion */
+ u32 cmd_type = E1000_ADVTXD_DTYP_DATA |
+ E1000_ADVTXD_DCMD_DEXT |
+ E1000_ADVTXD_DCMD_IFCS;
+
+ /* set HW vlan bit if vlan is present */
+ cmd_type |= IGB_SET_FLAG(tx_flags, IGB_TX_FLAGS_VLAN,
+ (E1000_ADVTXD_DCMD_VLE));
+
+ /* set segmentation bits for TSO */
+ cmd_type |= IGB_SET_FLAG(tx_flags, IGB_TX_FLAGS_TSO,
+ (E1000_ADVTXD_DCMD_TSE));
+
+ /* set timestamp bit if present */
+ cmd_type |= IGB_SET_FLAG(tx_flags, IGB_TX_FLAGS_TSTAMP,
+ (E1000_ADVTXD_MAC_TSTAMP));
+
+ /* insert frame checksum */
+ cmd_type ^= IGB_SET_FLAG(skb->no_fcs, 1, E1000_ADVTXD_DCMD_IFCS);
+
+ return cmd_type;
+}
+
+static void igb_tx_olinfo_status(struct igb_ring *tx_ring,
+ union e1000_adv_tx_desc *tx_desc,
+ u32 tx_flags, unsigned int paylen)
+{
+ u32 olinfo_status = paylen << E1000_ADVTXD_PAYLEN_SHIFT;
+
+ /* 82575 requires a unique index per ring */
+ if (test_bit(IGB_RING_FLAG_TX_CTX_IDX, &tx_ring->flags))
+ olinfo_status |= tx_ring->reg_idx << 4;
+
+ /* insert L4 checksum */
+ olinfo_status |= IGB_SET_FLAG(tx_flags,
+ IGB_TX_FLAGS_CSUM,
+ (E1000_TXD_POPTS_TXSM << 8));
+
+ /* insert IPv4 checksum */
+ olinfo_status |= IGB_SET_FLAG(tx_flags,
+ IGB_TX_FLAGS_IPV4,
+ (E1000_TXD_POPTS_IXSM << 8));
+
+ tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status);
+}
+
+static int __igb_maybe_stop_tx(struct igb_ring *tx_ring, const u16 size)
+{
+ struct net_device *netdev = tx_ring->netdev;
+
+ netif_stop_subqueue(netdev, tx_ring->queue_index);
+
+ /* Herbert's original patch had:
+ * smp_mb__after_netif_stop_queue();
+ * but since that doesn't exist yet, just open code it.
+ */
+ smp_mb();
+
+ /* We need to check again in a case another CPU has just
+ * made room available.
+ */
+ if (igb_desc_unused(tx_ring) < size)
+ return -EBUSY;
+
+ /* A reprieve! */
+ netif_wake_subqueue(netdev, tx_ring->queue_index);
+
+ u64_stats_update_begin(&tx_ring->tx_syncp2);
+ tx_ring->tx_stats.restart_queue2++;
+ u64_stats_update_end(&tx_ring->tx_syncp2);
+
+ return 0;
+}
+
+static inline int igb_maybe_stop_tx(struct igb_ring *tx_ring, const u16 size)
+{
+ if (igb_desc_unused(tx_ring) >= size)
+ return 0;
+ return __igb_maybe_stop_tx(tx_ring, size);
+}
+
+static void igb_tx_map(struct igb_ring *tx_ring,
+ struct igb_tx_buffer *first,
+ const u8 hdr_len)
+{
+ struct sk_buff *skb = first->skb;
+ struct igb_tx_buffer *tx_buffer;
+ union e1000_adv_tx_desc *tx_desc;
+ struct skb_frag_struct *frag;
+ dma_addr_t dma;
+ unsigned int data_len, size;
+ u32 tx_flags = first->tx_flags;
+ u32 cmd_type = igb_tx_cmd_type(skb, tx_flags);
+ u16 i = tx_ring->next_to_use;
+
+ tx_desc = IGB_TX_DESC(tx_ring, i);
+
+ igb_tx_olinfo_status(tx_ring, tx_desc, tx_flags, skb->len - hdr_len);
+
+ size = skb_headlen(skb);
+ data_len = skb->data_len;
+
+ dma = dma_map_single(tx_ring->dev, skb->data, size, DMA_TO_DEVICE);
+
+ tx_buffer = first;
+
+ for (frag = &skb_shinfo(skb)->frags[0];; frag++) {
+ if (dma_mapping_error(tx_ring->dev, dma))
+ goto dma_error;
+
+ /* record length, and DMA address */
+ dma_unmap_len_set(tx_buffer, len, size);
+ dma_unmap_addr_set(tx_buffer, dma, dma);
+
+ tx_desc->read.buffer_addr = cpu_to_le64(dma);
+
+ while (unlikely(size > IGB_MAX_DATA_PER_TXD)) {
+ tx_desc->read.cmd_type_len =
+ cpu_to_le32(cmd_type ^ IGB_MAX_DATA_PER_TXD);
+
+ i++;
+ tx_desc++;
+ if (i == tx_ring->count) {
+ tx_desc = IGB_TX_DESC(tx_ring, 0);
+ i = 0;
+ }
+ tx_desc->read.olinfo_status = 0;
+
+ dma += IGB_MAX_DATA_PER_TXD;
+ size -= IGB_MAX_DATA_PER_TXD;
+
+ tx_desc->read.buffer_addr = cpu_to_le64(dma);
+ }
+
+ if (likely(!data_len))
+ break;
+
+ tx_desc->read.cmd_type_len = cpu_to_le32(cmd_type ^ size);
+
+ i++;
+ tx_desc++;
+ if (i == tx_ring->count) {
+ tx_desc = IGB_TX_DESC(tx_ring, 0);
+ i = 0;
+ }
+ tx_desc->read.olinfo_status = 0;
+
+ size = skb_frag_size(frag);
+ data_len -= size;
+
+ dma = skb_frag_dma_map(tx_ring->dev, frag, 0,
+ size, DMA_TO_DEVICE);
+
+ tx_buffer = &tx_ring->tx_buffer_info[i];
+ }
+
+ /* write last descriptor with RS and EOP bits */
+ cmd_type |= size | IGB_TXD_DCMD;
+ tx_desc->read.cmd_type_len = cpu_to_le32(cmd_type);
+
+ netdev_tx_sent_queue(txring_txq(tx_ring), first->bytecount);
+
+ /* set the timestamp */
+ first->time_stamp = jiffies;
+
+ /* Force memory writes to complete before letting h/w know there
+ * are new descriptors to fetch. (Only applicable for weak-ordered
+ * memory model archs, such as IA-64).
+ *
+ * We also need this memory barrier to make certain all of the
+ * status bits have been updated before next_to_watch is written.
+ */
+ wmb();
+
+ /* set next_to_watch value indicating a packet is present */
+ first->next_to_watch = tx_desc;
+
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+
+ tx_ring->next_to_use = i;
+
+ /* Make sure there is space in the ring for the next send. */
+ igb_maybe_stop_tx(tx_ring, DESC_NEEDED);
+
+ if (netif_xmit_stopped(txring_txq(tx_ring)) || !skb->xmit_more) {
+ writel(i, tx_ring->tail);
+
+ /* we need this if more than one processor can write to our tail
+ * at a time, it synchronizes IO on IA64/Altix systems
+ */
+ mmiowb();
+ }
+ return;
+
+dma_error:
+ dev_err(tx_ring->dev, "TX DMA map failed\n");
+
+ /* clear dma mappings for failed tx_buffer_info map */
+ for (;;) {
+ tx_buffer = &tx_ring->tx_buffer_info[i];
+ igb_unmap_and_free_tx_resource(tx_ring, tx_buffer);
+ if (tx_buffer == first)
+ break;
+ if (i == 0)
+ i = tx_ring->count;
+ i--;
+ }
+
+ tx_ring->next_to_use = i;
+}
+
+netdev_tx_t igb_xmit_frame_ring(struct sk_buff *skb,
+ struct igb_ring *tx_ring)
+{
+ struct igb_tx_buffer *first;
+ int tso;
+ u32 tx_flags = 0;
+ u16 count = TXD_USE_COUNT(skb_headlen(skb));
+ __be16 protocol = vlan_get_protocol(skb);
+ u8 hdr_len = 0;
+
+ /* need: 1 descriptor per page * PAGE_SIZE/IGB_MAX_DATA_PER_TXD,
+ * + 1 desc for skb_headlen/IGB_MAX_DATA_PER_TXD,
+ * + 2 desc gap to keep tail from touching head,
+ * + 1 desc for context descriptor,
+ * otherwise try next time
+ */
+ if (NETDEV_FRAG_PAGE_MAX_SIZE > IGB_MAX_DATA_PER_TXD) {
+ unsigned short f;
+
+ for (f = 0; f < skb_shinfo(skb)->nr_frags; f++)
+ count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size);
+ } else {
+ count += skb_shinfo(skb)->nr_frags;
+ }
+
+ if (igb_maybe_stop_tx(tx_ring, count + 3)) {
+ /* this is a hard error */
+ return NETDEV_TX_BUSY;
+ }
+
+ /* record the location of the first descriptor for this packet */
+ first = &tx_ring->tx_buffer_info[tx_ring->next_to_use];
+ first->skb = skb;
+ first->bytecount = skb->len;
+ first->gso_segs = 1;
+
+ if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) {
+ struct igb_adapter *adapter = netdev_priv(tx_ring->netdev);
+
+ if (!test_and_set_bit_lock(__IGB_PTP_TX_IN_PROGRESS,
+ &adapter->state)) {
+ skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
+ tx_flags |= IGB_TX_FLAGS_TSTAMP;
+
+ adapter->ptp_tx_skb = skb_get(skb);
+ adapter->ptp_tx_start = jiffies;
+ if (adapter->hw.mac.type == e1000_82576)
+ schedule_work(&adapter->ptp_tx_work);
+ }
+ }
+
+ skb_tx_timestamp(skb);
+
+ if (skb_vlan_tag_present(skb)) {
+ tx_flags |= IGB_TX_FLAGS_VLAN;
+ tx_flags |= (skb_vlan_tag_get(skb) << IGB_TX_FLAGS_VLAN_SHIFT);
+ }
+
+ /* record initial flags and protocol */
+ first->tx_flags = tx_flags;
+ first->protocol = protocol;
+
+ tso = igb_tso(tx_ring, first, &hdr_len);
+ if (tso < 0)
+ goto out_drop;
+ else if (!tso)
+ igb_tx_csum(tx_ring, first);
+
+ igb_tx_map(tx_ring, first, hdr_len);
+
+ return NETDEV_TX_OK;
+
+out_drop:
+ igb_unmap_and_free_tx_resource(tx_ring, first);
+
+ return NETDEV_TX_OK;
+}
+
+static inline struct igb_ring *igb_tx_queue_mapping(struct igb_adapter *adapter,
+ struct sk_buff *skb)
+{
+ unsigned int r_idx = skb->queue_mapping;
+
+ if (r_idx >= adapter->num_tx_queues)
+ r_idx = r_idx % adapter->num_tx_queues;
+
+ return adapter->tx_ring[r_idx];
+}
+
+static netdev_tx_t igb_xmit_frame(struct sk_buff *skb,
+ struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ if (test_bit(__IGB_DOWN, &adapter->state)) {
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+
+ if (skb->len <= 0) {
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+
+ /* The minimum packet size with TCTL.PSP set is 17 so pad the skb
+ * in order to meet this minimum size requirement.
+ */
+ if (skb_put_padto(skb, 17))
+ return NETDEV_TX_OK;
+
+ return igb_xmit_frame_ring(skb, igb_tx_queue_mapping(adapter, skb));
+}
+
+/**
+ * igb_tx_timeout - Respond to a Tx Hang
+ * @netdev: network interface device structure
+ **/
+static void igb_tx_timeout(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* Do the reset outside of interrupt context */
+ adapter->tx_timeout_count++;
+
+ if (hw->mac.type >= e1000_82580)
+ hw->dev_spec._82575.global_device_reset = true;
+
+ schedule_work(&adapter->reset_task);
+ wr32(E1000_EICS,
+ (adapter->eims_enable_mask & ~adapter->eims_other));
+}
+
+static void igb_reset_task(struct work_struct *work)
+{
+ struct igb_adapter *adapter;
+ adapter = container_of(work, struct igb_adapter, reset_task);
+
+ igb_dump(adapter);
+ netdev_err(adapter->netdev, "Reset adapter\n");
+ igb_reinit_locked(adapter);
+}
+
+/**
+ * igb_get_stats64 - Get System Network Statistics
+ * @netdev: network interface device structure
+ * @stats: rtnl_link_stats64 pointer
+ **/
+static struct rtnl_link_stats64 *igb_get_stats64(struct net_device *netdev,
+ struct rtnl_link_stats64 *stats)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ spin_lock(&adapter->stats64_lock);
+ igb_update_stats(adapter, &adapter->stats64);
+ memcpy(stats, &adapter->stats64, sizeof(*stats));
+ spin_unlock(&adapter->stats64_lock);
+
+ return stats;
+}
+
+/**
+ * igb_change_mtu - Change the Maximum Transfer Unit
+ * @netdev: network interface device structure
+ * @new_mtu: new value for maximum frame size
+ *
+ * Returns 0 on success, negative on failure
+ **/
+static int igb_change_mtu(struct net_device *netdev, int new_mtu)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct pci_dev *pdev = adapter->pdev;
+ int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN;
+
+ if ((new_mtu < 68) || (max_frame > MAX_JUMBO_FRAME_SIZE)) {
+ dev_err(&pdev->dev, "Invalid MTU setting\n");
+ return -EINVAL;
+ }
+
+#define MAX_STD_JUMBO_FRAME_SIZE 9238
+ if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
+ dev_err(&pdev->dev, "MTU > 9216 not supported.\n");
+ return -EINVAL;
+ }
+
+ /* adjust max frame to be at least the size of a standard frame */
+ if (max_frame < (ETH_FRAME_LEN + ETH_FCS_LEN))
+ max_frame = ETH_FRAME_LEN + ETH_FCS_LEN;
+
+ while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
+ usleep_range(1000, 2000);
+
+ /* igb_down has a dependency on max_frame_size */
+ adapter->max_frame_size = max_frame;
+
+ if (netif_running(netdev))
+ igb_down(adapter);
+
+ dev_info(&pdev->dev, "changing MTU from %d to %d\n",
+ netdev->mtu, new_mtu);
+ netdev->mtu = new_mtu;
+
+ if (netif_running(netdev))
+ igb_up(adapter);
+ else
+ igb_reset(adapter);
+
+ clear_bit(__IGB_RESETTING, &adapter->state);
+
+ return 0;
+}
+
+/**
+ * igb_update_stats - Update the board statistics counters
+ * @adapter: board private structure
+ **/
+void igb_update_stats(struct igb_adapter *adapter,
+ struct rtnl_link_stats64 *net_stats)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct pci_dev *pdev = adapter->pdev;
+ u32 reg, mpc;
+ int i;
+ u64 bytes, packets;
+ unsigned int start;
+ u64 _bytes, _packets;
+
+ /* Prevent stats update while adapter is being reset, or if the pci
+ * connection is down.
+ */
+ if (adapter->link_speed == 0)
+ return;
+ if (pci_channel_offline(pdev))
+ return;
+
+ bytes = 0;
+ packets = 0;
+
+ rcu_read_lock();
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ struct igb_ring *ring = adapter->rx_ring[i];
+ u32 rqdpc = rd32(E1000_RQDPC(i));
+ if (hw->mac.type >= e1000_i210)
+ wr32(E1000_RQDPC(i), 0);
+
+ if (rqdpc) {
+ ring->rx_stats.drops += rqdpc;
+ net_stats->rx_fifo_errors += rqdpc;
+ }
+
+ do {
+ start = u64_stats_fetch_begin_irq(&ring->rx_syncp);
+ _bytes = ring->rx_stats.bytes;
+ _packets = ring->rx_stats.packets;
+ } while (u64_stats_fetch_retry_irq(&ring->rx_syncp, start));
+ bytes += _bytes;
+ packets += _packets;
+ }
+
+ net_stats->rx_bytes = bytes;
+ net_stats->rx_packets = packets;
+
+ bytes = 0;
+ packets = 0;
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ struct igb_ring *ring = adapter->tx_ring[i];
+ do {
+ start = u64_stats_fetch_begin_irq(&ring->tx_syncp);
+ _bytes = ring->tx_stats.bytes;
+ _packets = ring->tx_stats.packets;
+ } while (u64_stats_fetch_retry_irq(&ring->tx_syncp, start));
+ bytes += _bytes;
+ packets += _packets;
+ }
+ net_stats->tx_bytes = bytes;
+ net_stats->tx_packets = packets;
+ rcu_read_unlock();
+
+ /* read stats registers */
+ adapter->stats.crcerrs += rd32(E1000_CRCERRS);
+ adapter->stats.gprc += rd32(E1000_GPRC);
+ adapter->stats.gorc += rd32(E1000_GORCL);
+ rd32(E1000_GORCH); /* clear GORCL */
+ adapter->stats.bprc += rd32(E1000_BPRC);
+ adapter->stats.mprc += rd32(E1000_MPRC);
+ adapter->stats.roc += rd32(E1000_ROC);
+
+ adapter->stats.prc64 += rd32(E1000_PRC64);
+ adapter->stats.prc127 += rd32(E1000_PRC127);
+ adapter->stats.prc255 += rd32(E1000_PRC255);
+ adapter->stats.prc511 += rd32(E1000_PRC511);
+ adapter->stats.prc1023 += rd32(E1000_PRC1023);
+ adapter->stats.prc1522 += rd32(E1000_PRC1522);
+ adapter->stats.symerrs += rd32(E1000_SYMERRS);
+ adapter->stats.sec += rd32(E1000_SEC);
+
+ mpc = rd32(E1000_MPC);
+ adapter->stats.mpc += mpc;
+ net_stats->rx_fifo_errors += mpc;
+ adapter->stats.scc += rd32(E1000_SCC);
+ adapter->stats.ecol += rd32(E1000_ECOL);
+ adapter->stats.mcc += rd32(E1000_MCC);
+ adapter->stats.latecol += rd32(E1000_LATECOL);
+ adapter->stats.dc += rd32(E1000_DC);
+ adapter->stats.rlec += rd32(E1000_RLEC);
+ adapter->stats.xonrxc += rd32(E1000_XONRXC);
+ adapter->stats.xontxc += rd32(E1000_XONTXC);
+ adapter->stats.xoffrxc += rd32(E1000_XOFFRXC);
+ adapter->stats.xofftxc += rd32(E1000_XOFFTXC);
+ adapter->stats.fcruc += rd32(E1000_FCRUC);
+ adapter->stats.gptc += rd32(E1000_GPTC);
+ adapter->stats.gotc += rd32(E1000_GOTCL);
+ rd32(E1000_GOTCH); /* clear GOTCL */
+ adapter->stats.rnbc += rd32(E1000_RNBC);
+ adapter->stats.ruc += rd32(E1000_RUC);
+ adapter->stats.rfc += rd32(E1000_RFC);
+ adapter->stats.rjc += rd32(E1000_RJC);
+ adapter->stats.tor += rd32(E1000_TORH);
+ adapter->stats.tot += rd32(E1000_TOTH);
+ adapter->stats.tpr += rd32(E1000_TPR);
+
+ adapter->stats.ptc64 += rd32(E1000_PTC64);
+ adapter->stats.ptc127 += rd32(E1000_PTC127);
+ adapter->stats.ptc255 += rd32(E1000_PTC255);
+ adapter->stats.ptc511 += rd32(E1000_PTC511);
+ adapter->stats.ptc1023 += rd32(E1000_PTC1023);
+ adapter->stats.ptc1522 += rd32(E1000_PTC1522);
+
+ adapter->stats.mptc += rd32(E1000_MPTC);
+ adapter->stats.bptc += rd32(E1000_BPTC);
+
+ adapter->stats.tpt += rd32(E1000_TPT);
+ adapter->stats.colc += rd32(E1000_COLC);
+
+ adapter->stats.algnerrc += rd32(E1000_ALGNERRC);
+ /* read internal phy specific stats */
+ reg = rd32(E1000_CTRL_EXT);
+ if (!(reg & E1000_CTRL_EXT_LINK_MODE_MASK)) {
+ adapter->stats.rxerrc += rd32(E1000_RXERRC);
+
+ /* this stat has invalid values on i210/i211 */
+ if ((hw->mac.type != e1000_i210) &&
+ (hw->mac.type != e1000_i211))
+ adapter->stats.tncrs += rd32(E1000_TNCRS);
+ }
+
+ adapter->stats.tsctc += rd32(E1000_TSCTC);
+ adapter->stats.tsctfc += rd32(E1000_TSCTFC);
+
+ adapter->stats.iac += rd32(E1000_IAC);
+ adapter->stats.icrxoc += rd32(E1000_ICRXOC);
+ adapter->stats.icrxptc += rd32(E1000_ICRXPTC);
+ adapter->stats.icrxatc += rd32(E1000_ICRXATC);
+ adapter->stats.ictxptc += rd32(E1000_ICTXPTC);
+ adapter->stats.ictxatc += rd32(E1000_ICTXATC);
+ adapter->stats.ictxqec += rd32(E1000_ICTXQEC);
+ adapter->stats.ictxqmtc += rd32(E1000_ICTXQMTC);
+ adapter->stats.icrxdmtc += rd32(E1000_ICRXDMTC);
+
+ /* Fill out the OS statistics structure */
+ net_stats->multicast = adapter->stats.mprc;
+ net_stats->collisions = adapter->stats.colc;
+
+ /* Rx Errors */
+
+ /* RLEC on some newer hardware can be incorrect so build
+ * our own version based on RUC and ROC
+ */
+ net_stats->rx_errors = adapter->stats.rxerrc +
+ adapter->stats.crcerrs + adapter->stats.algnerrc +
+ adapter->stats.ruc + adapter->stats.roc +
+ adapter->stats.cexterr;
+ net_stats->rx_length_errors = adapter->stats.ruc +
+ adapter->stats.roc;
+ net_stats->rx_crc_errors = adapter->stats.crcerrs;
+ net_stats->rx_frame_errors = adapter->stats.algnerrc;
+ net_stats->rx_missed_errors = adapter->stats.mpc;
+
+ /* Tx Errors */
+ net_stats->tx_errors = adapter->stats.ecol +
+ adapter->stats.latecol;
+ net_stats->tx_aborted_errors = adapter->stats.ecol;
+ net_stats->tx_window_errors = adapter->stats.latecol;
+ net_stats->tx_carrier_errors = adapter->stats.tncrs;
+
+ /* Tx Dropped needs to be maintained elsewhere */
+
+ /* Management Stats */
+ adapter->stats.mgptc += rd32(E1000_MGTPTC);
+ adapter->stats.mgprc += rd32(E1000_MGTPRC);
+ adapter->stats.mgpdc += rd32(E1000_MGTPDC);
+
+ /* OS2BMC Stats */
+ reg = rd32(E1000_MANC);
+ if (reg & E1000_MANC_EN_BMC2OS) {
+ adapter->stats.o2bgptc += rd32(E1000_O2BGPTC);
+ adapter->stats.o2bspc += rd32(E1000_O2BSPC);
+ adapter->stats.b2ospc += rd32(E1000_B2OSPC);
+ adapter->stats.b2ogprc += rd32(E1000_B2OGPRC);
+ }
+}
+
+static void igb_tsync_interrupt(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct ptp_clock_event event;
+ struct timespec ts;
+ u32 ack = 0, tsauxc, sec, nsec, tsicr = rd32(E1000_TSICR);
+
+ if (tsicr & TSINTR_SYS_WRAP) {
+ event.type = PTP_CLOCK_PPS;
+ if (adapter->ptp_caps.pps)
+ ptp_clock_event(adapter->ptp_clock, &event);
+ else
+ dev_err(&adapter->pdev->dev, "unexpected SYS WRAP");
+ ack |= TSINTR_SYS_WRAP;
+ }
+
+ if (tsicr & E1000_TSICR_TXTS) {
+ /* retrieve hardware timestamp */
+ schedule_work(&adapter->ptp_tx_work);
+ ack |= E1000_TSICR_TXTS;
+ }
+
+ if (tsicr & TSINTR_TT0) {
+ spin_lock(&adapter->tmreg_lock);
+ ts = timespec_add(adapter->perout[0].start,
+ adapter->perout[0].period);
+ wr32(E1000_TRGTTIML0, ts.tv_nsec);
+ wr32(E1000_TRGTTIMH0, ts.tv_sec);
+ tsauxc = rd32(E1000_TSAUXC);
+ tsauxc |= TSAUXC_EN_TT0;
+ wr32(E1000_TSAUXC, tsauxc);
+ adapter->perout[0].start = ts;
+ spin_unlock(&adapter->tmreg_lock);
+ ack |= TSINTR_TT0;
+ }
+
+ if (tsicr & TSINTR_TT1) {
+ spin_lock(&adapter->tmreg_lock);
+ ts = timespec_add(adapter->perout[1].start,
+ adapter->perout[1].period);
+ wr32(E1000_TRGTTIML1, ts.tv_nsec);
+ wr32(E1000_TRGTTIMH1, ts.tv_sec);
+ tsauxc = rd32(E1000_TSAUXC);
+ tsauxc |= TSAUXC_EN_TT1;
+ wr32(E1000_TSAUXC, tsauxc);
+ adapter->perout[1].start = ts;
+ spin_unlock(&adapter->tmreg_lock);
+ ack |= TSINTR_TT1;
+ }
+
+ if (tsicr & TSINTR_AUTT0) {
+ nsec = rd32(E1000_AUXSTMPL0);
+ sec = rd32(E1000_AUXSTMPH0);
+ event.type = PTP_CLOCK_EXTTS;
+ event.index = 0;
+ event.timestamp = sec * 1000000000ULL + nsec;
+ ptp_clock_event(adapter->ptp_clock, &event);
+ ack |= TSINTR_AUTT0;
+ }
+
+ if (tsicr & TSINTR_AUTT1) {
+ nsec = rd32(E1000_AUXSTMPL1);
+ sec = rd32(E1000_AUXSTMPH1);
+ event.type = PTP_CLOCK_EXTTS;
+ event.index = 1;
+ event.timestamp = sec * 1000000000ULL + nsec;
+ ptp_clock_event(adapter->ptp_clock, &event);
+ ack |= TSINTR_AUTT1;
+ }
+
+ /* acknowledge the interrupts */
+ wr32(E1000_TSICR, ack);
+}
+
+static irqreturn_t igb_msix_other(int irq, void *data)
+{
+ struct igb_adapter *adapter = data;
+ struct e1000_hw *hw = &adapter->hw;
+ u32 icr = rd32(E1000_ICR);
+ /* reading ICR causes bit 31 of EICR to be cleared */
+
+ if (icr & E1000_ICR_DRSTA)
+ schedule_work(&adapter->reset_task);
+
+ if (icr & E1000_ICR_DOUTSYNC) {
+ /* HW is reporting DMA is out of sync */
+ adapter->stats.doosync++;
+ /* The DMA Out of Sync is also indication of a spoof event
+ * in IOV mode. Check the Wrong VM Behavior register to
+ * see if it is really a spoof event.
+ */
+ igb_check_wvbr(adapter);
+ }
+
+ /* Check for a mailbox event */
+ if (icr & E1000_ICR_VMMB)
+ igb_msg_task(adapter);
+
+ if (icr & E1000_ICR_LSC) {
+ hw->mac.get_link_status = 1;
+ /* guard against interrupt when we're going down */
+ if (!test_bit(__IGB_DOWN, &adapter->state))
+ mod_timer(&adapter->watchdog_timer, jiffies + 1);
+ }
+
+ if (icr & E1000_ICR_TS)
+ igb_tsync_interrupt(adapter);
+
+ wr32(E1000_EIMS, adapter->eims_other);
+
+ return IRQ_HANDLED;
+}
+
+static void igb_write_itr(struct igb_q_vector *q_vector)
+{
+ struct igb_adapter *adapter = q_vector->adapter;
+ u32 itr_val = q_vector->itr_val & 0x7FFC;
+
+ if (!q_vector->set_itr)
+ return;
+
+ if (!itr_val)
+ itr_val = 0x4;
+
+ if (adapter->hw.mac.type == e1000_82575)
+ itr_val |= itr_val << 16;
+ else
+ itr_val |= E1000_EITR_CNT_IGNR;
+
+ writel(itr_val, q_vector->itr_register);
+ q_vector->set_itr = 0;
+}
+
+static irqreturn_t igb_msix_ring(int irq, void *data)
+{
+ struct igb_q_vector *q_vector = data;
+
+ /* Write the ITR value calculated from the previous interrupt. */
+ igb_write_itr(q_vector);
+
+ napi_schedule(&q_vector->napi);
+
+ return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_IGB_DCA
+static void igb_update_tx_dca(struct igb_adapter *adapter,
+ struct igb_ring *tx_ring,
+ int cpu)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 txctrl = dca3_get_tag(tx_ring->dev, cpu);
+
+ if (hw->mac.type != e1000_82575)
+ txctrl <<= E1000_DCA_TXCTRL_CPUID_SHIFT;
+
+ /* We can enable relaxed ordering for reads, but not writes when
+ * DCA is enabled. This is due to a known issue in some chipsets
+ * which will cause the DCA tag to be cleared.
+ */
+ txctrl |= E1000_DCA_TXCTRL_DESC_RRO_EN |
+ E1000_DCA_TXCTRL_DATA_RRO_EN |
+ E1000_DCA_TXCTRL_DESC_DCA_EN;
+
+ wr32(E1000_DCA_TXCTRL(tx_ring->reg_idx), txctrl);
+}
+
+static void igb_update_rx_dca(struct igb_adapter *adapter,
+ struct igb_ring *rx_ring,
+ int cpu)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rxctrl = dca3_get_tag(&adapter->pdev->dev, cpu);
+
+ if (hw->mac.type != e1000_82575)
+ rxctrl <<= E1000_DCA_RXCTRL_CPUID_SHIFT;
+
+ /* We can enable relaxed ordering for reads, but not writes when
+ * DCA is enabled. This is due to a known issue in some chipsets
+ * which will cause the DCA tag to be cleared.
+ */
+ rxctrl |= E1000_DCA_RXCTRL_DESC_RRO_EN |
+ E1000_DCA_RXCTRL_DESC_DCA_EN;
+
+ wr32(E1000_DCA_RXCTRL(rx_ring->reg_idx), rxctrl);
+}
+
+static void igb_update_dca(struct igb_q_vector *q_vector)
+{
+ struct igb_adapter *adapter = q_vector->adapter;
+ int cpu = get_cpu();
+
+ if (q_vector->cpu == cpu)
+ goto out_no_update;
+
+ if (q_vector->tx.ring)
+ igb_update_tx_dca(adapter, q_vector->tx.ring, cpu);
+
+ if (q_vector->rx.ring)
+ igb_update_rx_dca(adapter, q_vector->rx.ring, cpu);
+
+ q_vector->cpu = cpu;
+out_no_update:
+ put_cpu();
+}
+
+static void igb_setup_dca(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ int i;
+
+ if (!(adapter->flags & IGB_FLAG_DCA_ENABLED))
+ return;
+
+ /* Always use CB2 mode, difference is masked in the CB driver. */
+ wr32(E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_CB2);
+
+ for (i = 0; i < adapter->num_q_vectors; i++) {
+ adapter->q_vector[i]->cpu = -1;
+ igb_update_dca(adapter->q_vector[i]);
+ }
+}
+
+static int __igb_notify_dca(struct device *dev, void *data)
+{
+ struct net_device *netdev = dev_get_drvdata(dev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_hw *hw = &adapter->hw;
+ unsigned long event = *(unsigned long *)data;
+
+ switch (event) {
+ case DCA_PROVIDER_ADD:
+ /* if already enabled, don't do it again */
+ if (adapter->flags & IGB_FLAG_DCA_ENABLED)
+ break;
+ if (dca_add_requester(dev) == 0) {
+ adapter->flags |= IGB_FLAG_DCA_ENABLED;
+ dev_info(&pdev->dev, "DCA enabled\n");
+ igb_setup_dca(adapter);
+ break;
+ }
+ /* Fall Through since DCA is disabled. */
+ case DCA_PROVIDER_REMOVE:
+ if (adapter->flags & IGB_FLAG_DCA_ENABLED) {
+ /* without this a class_device is left
+ * hanging around in the sysfs model
+ */
+ dca_remove_requester(dev);
+ dev_info(&pdev->dev, "DCA disabled\n");
+ adapter->flags &= ~IGB_FLAG_DCA_ENABLED;
+ wr32(E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_DISABLE);
+ }
+ break;
+ }
+
+ return 0;
+}
+
+static int igb_notify_dca(struct notifier_block *nb, unsigned long event,
+ void *p)
+{
+ int ret_val;
+
+ ret_val = driver_for_each_device(&igb_driver.driver, NULL, &event,
+ __igb_notify_dca);
+
+ return ret_val ? NOTIFY_BAD : NOTIFY_DONE;
+}
+#endif /* CONFIG_IGB_DCA */
+
+#ifdef CONFIG_PCI_IOV
+static int igb_vf_configure(struct igb_adapter *adapter, int vf)
+{
+ unsigned char mac_addr[ETH_ALEN];
+
+ eth_zero_addr(mac_addr);
+ igb_set_vf_mac(adapter, vf, mac_addr);
+
+ /* By default spoof check is enabled for all VFs */
+ adapter->vf_data[vf].spoofchk_enabled = true;
+
+ return 0;
+}
+
+#endif
+static void igb_ping_all_vfs(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ping;
+ int i;
+
+ for (i = 0 ; i < adapter->vfs_allocated_count; i++) {
+ ping = E1000_PF_CONTROL_MSG;
+ if (adapter->vf_data[i].flags & IGB_VF_FLAG_CTS)
+ ping |= E1000_VT_MSGTYPE_CTS;
+ igb_write_mbx(hw, &ping, 1, i);
+ }
+}
+
+static int igb_set_vf_promisc(struct igb_adapter *adapter, u32 *msgbuf, u32 vf)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 vmolr = rd32(E1000_VMOLR(vf));
+ struct vf_data_storage *vf_data = &adapter->vf_data[vf];
+
+ vf_data->flags &= ~(IGB_VF_FLAG_UNI_PROMISC |
+ IGB_VF_FLAG_MULTI_PROMISC);
+ vmolr &= ~(E1000_VMOLR_ROPE | E1000_VMOLR_ROMPE | E1000_VMOLR_MPME);
+
+ if (*msgbuf & E1000_VF_SET_PROMISC_MULTICAST) {
+ vmolr |= E1000_VMOLR_MPME;
+ vf_data->flags |= IGB_VF_FLAG_MULTI_PROMISC;
+ *msgbuf &= ~E1000_VF_SET_PROMISC_MULTICAST;
+ } else {
+ /* if we have hashes and we are clearing a multicast promisc
+ * flag we need to write the hashes to the MTA as this step
+ * was previously skipped
+ */
+ if (vf_data->num_vf_mc_hashes > 30) {
+ vmolr |= E1000_VMOLR_MPME;
+ } else if (vf_data->num_vf_mc_hashes) {
+ int j;
+
+ vmolr |= E1000_VMOLR_ROMPE;
+ for (j = 0; j < vf_data->num_vf_mc_hashes; j++)
+ igb_mta_set(hw, vf_data->vf_mc_hashes[j]);
+ }
+ }
+
+ wr32(E1000_VMOLR(vf), vmolr);
+
+ /* there are flags left unprocessed, likely not supported */
+ if (*msgbuf & E1000_VT_MSGINFO_MASK)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int igb_set_vf_multicasts(struct igb_adapter *adapter,
+ u32 *msgbuf, u32 vf)
+{
+ int n = (msgbuf[0] & E1000_VT_MSGINFO_MASK) >> E1000_VT_MSGINFO_SHIFT;
+ u16 *hash_list = (u16 *)&msgbuf[1];
+ struct vf_data_storage *vf_data = &adapter->vf_data[vf];
+ int i;
+
+ /* salt away the number of multicast addresses assigned
+ * to this VF for later use to restore when the PF multi cast
+ * list changes
+ */
+ vf_data->num_vf_mc_hashes = n;
+
+ /* only up to 30 hash values supported */
+ if (n > 30)
+ n = 30;
+
+ /* store the hashes for later use */
+ for (i = 0; i < n; i++)
+ vf_data->vf_mc_hashes[i] = hash_list[i];
+
+ /* Flush and reset the mta with the new values */
+ igb_set_rx_mode(adapter->netdev);
+
+ return 0;
+}
+
+static void igb_restore_vf_multicasts(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct vf_data_storage *vf_data;
+ int i, j;
+
+ for (i = 0; i < adapter->vfs_allocated_count; i++) {
+ u32 vmolr = rd32(E1000_VMOLR(i));
+
+ vmolr &= ~(E1000_VMOLR_ROMPE | E1000_VMOLR_MPME);
+
+ vf_data = &adapter->vf_data[i];
+
+ if ((vf_data->num_vf_mc_hashes > 30) ||
+ (vf_data->flags & IGB_VF_FLAG_MULTI_PROMISC)) {
+ vmolr |= E1000_VMOLR_MPME;
+ } else if (vf_data->num_vf_mc_hashes) {
+ vmolr |= E1000_VMOLR_ROMPE;
+ for (j = 0; j < vf_data->num_vf_mc_hashes; j++)
+ igb_mta_set(hw, vf_data->vf_mc_hashes[j]);
+ }
+ wr32(E1000_VMOLR(i), vmolr);
+ }
+}
+
+static void igb_clear_vf_vfta(struct igb_adapter *adapter, u32 vf)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 pool_mask, reg, vid;
+ int i;
+
+ pool_mask = 1 << (E1000_VLVF_POOLSEL_SHIFT + vf);
+
+ /* Find the vlan filter for this id */
+ for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) {
+ reg = rd32(E1000_VLVF(i));
+
+ /* remove the vf from the pool */
+ reg &= ~pool_mask;
+
+ /* if pool is empty then remove entry from vfta */
+ if (!(reg & E1000_VLVF_POOLSEL_MASK) &&
+ (reg & E1000_VLVF_VLANID_ENABLE)) {
+ reg = 0;
+ vid = reg & E1000_VLVF_VLANID_MASK;
+ igb_vfta_set(hw, vid, false);
+ }
+
+ wr32(E1000_VLVF(i), reg);
+ }
+
+ adapter->vf_data[vf].vlans_enabled = 0;
+}
+
+static s32 igb_vlvf_set(struct igb_adapter *adapter, u32 vid, bool add, u32 vf)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 reg, i;
+
+ /* The vlvf table only exists on 82576 hardware and newer */
+ if (hw->mac.type < e1000_82576)
+ return -1;
+
+ /* we only need to do this if VMDq is enabled */
+ if (!adapter->vfs_allocated_count)
+ return -1;
+
+ /* Find the vlan filter for this id */
+ for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) {
+ reg = rd32(E1000_VLVF(i));
+ if ((reg & E1000_VLVF_VLANID_ENABLE) &&
+ vid == (reg & E1000_VLVF_VLANID_MASK))
+ break;
+ }
+
+ if (add) {
+ if (i == E1000_VLVF_ARRAY_SIZE) {
+ /* Did not find a matching VLAN ID entry that was
+ * enabled. Search for a free filter entry, i.e.
+ * one without the enable bit set
+ */
+ for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) {
+ reg = rd32(E1000_VLVF(i));
+ if (!(reg & E1000_VLVF_VLANID_ENABLE))
+ break;
+ }
+ }
+ if (i < E1000_VLVF_ARRAY_SIZE) {
+ /* Found an enabled/available entry */
+ reg |= 1 << (E1000_VLVF_POOLSEL_SHIFT + vf);
+
+ /* if !enabled we need to set this up in vfta */
+ if (!(reg & E1000_VLVF_VLANID_ENABLE)) {
+ /* add VID to filter table */
+ igb_vfta_set(hw, vid, true);
+ reg |= E1000_VLVF_VLANID_ENABLE;
+ }
+ reg &= ~E1000_VLVF_VLANID_MASK;
+ reg |= vid;
+ wr32(E1000_VLVF(i), reg);
+
+ /* do not modify RLPML for PF devices */
+ if (vf >= adapter->vfs_allocated_count)
+ return 0;
+
+ if (!adapter->vf_data[vf].vlans_enabled) {
+ u32 size;
+
+ reg = rd32(E1000_VMOLR(vf));
+ size = reg & E1000_VMOLR_RLPML_MASK;
+ size += 4;
+ reg &= ~E1000_VMOLR_RLPML_MASK;
+ reg |= size;
+ wr32(E1000_VMOLR(vf), reg);
+ }
+
+ adapter->vf_data[vf].vlans_enabled++;
+ }
+ } else {
+ if (i < E1000_VLVF_ARRAY_SIZE) {
+ /* remove vf from the pool */
+ reg &= ~(1 << (E1000_VLVF_POOLSEL_SHIFT + vf));
+ /* if pool is empty then remove entry from vfta */
+ if (!(reg & E1000_VLVF_POOLSEL_MASK)) {
+ reg = 0;
+ igb_vfta_set(hw, vid, false);
+ }
+ wr32(E1000_VLVF(i), reg);
+
+ /* do not modify RLPML for PF devices */
+ if (vf >= adapter->vfs_allocated_count)
+ return 0;
+
+ adapter->vf_data[vf].vlans_enabled--;
+ if (!adapter->vf_data[vf].vlans_enabled) {
+ u32 size;
+
+ reg = rd32(E1000_VMOLR(vf));
+ size = reg & E1000_VMOLR_RLPML_MASK;
+ size -= 4;
+ reg &= ~E1000_VMOLR_RLPML_MASK;
+ reg |= size;
+ wr32(E1000_VMOLR(vf), reg);
+ }
+ }
+ }
+ return 0;
+}
+
+static void igb_set_vmvir(struct igb_adapter *adapter, u32 vid, u32 vf)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (vid)
+ wr32(E1000_VMVIR(vf), (vid | E1000_VMVIR_VLANA_DEFAULT));
+ else
+ wr32(E1000_VMVIR(vf), 0);
+}
+
+static int igb_ndo_set_vf_vlan(struct net_device *netdev,
+ int vf, u16 vlan, u8 qos)
+{
+ int err = 0;
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ if ((vf >= adapter->vfs_allocated_count) || (vlan > 4095) || (qos > 7))
+ return -EINVAL;
+ if (vlan || qos) {
+ err = igb_vlvf_set(adapter, vlan, !!vlan, vf);
+ if (err)
+ goto out;
+ igb_set_vmvir(adapter, vlan | (qos << VLAN_PRIO_SHIFT), vf);
+ igb_set_vmolr(adapter, vf, !vlan);
+ adapter->vf_data[vf].pf_vlan = vlan;
+ adapter->vf_data[vf].pf_qos = qos;
+ dev_info(&adapter->pdev->dev,
+ "Setting VLAN %d, QOS 0x%x on VF %d\n", vlan, qos, vf);
+ if (test_bit(__IGB_DOWN, &adapter->state)) {
+ dev_warn(&adapter->pdev->dev,
+ "The VF VLAN has been set, but the PF device is not up.\n");
+ dev_warn(&adapter->pdev->dev,
+ "Bring the PF device up before attempting to use the VF device.\n");
+ }
+ } else {
+ igb_vlvf_set(adapter, adapter->vf_data[vf].pf_vlan,
+ false, vf);
+ igb_set_vmvir(adapter, vlan, vf);
+ igb_set_vmolr(adapter, vf, true);
+ adapter->vf_data[vf].pf_vlan = 0;
+ adapter->vf_data[vf].pf_qos = 0;
+ }
+out:
+ return err;
+}
+
+static int igb_find_vlvf_entry(struct igb_adapter *adapter, int vid)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ int i;
+ u32 reg;
+
+ /* Find the vlan filter for this id */
+ for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) {
+ reg = rd32(E1000_VLVF(i));
+ if ((reg & E1000_VLVF_VLANID_ENABLE) &&
+ vid == (reg & E1000_VLVF_VLANID_MASK))
+ break;
+ }
+
+ if (i >= E1000_VLVF_ARRAY_SIZE)
+ i = -1;
+
+ return i;
+}
+
+static int igb_set_vf_vlan(struct igb_adapter *adapter, u32 *msgbuf, u32 vf)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ int add = (msgbuf[0] & E1000_VT_MSGINFO_MASK) >> E1000_VT_MSGINFO_SHIFT;
+ int vid = (msgbuf[1] & E1000_VLVF_VLANID_MASK);
+ int err = 0;
+
+ /* If in promiscuous mode we need to make sure the PF also has
+ * the VLAN filter set.
+ */
+ if (add && (adapter->netdev->flags & IFF_PROMISC))
+ err = igb_vlvf_set(adapter, vid, add,
+ adapter->vfs_allocated_count);
+ if (err)
+ goto out;
+
+ err = igb_vlvf_set(adapter, vid, add, vf);
+
+ if (err)
+ goto out;
+
+ /* Go through all the checks to see if the VLAN filter should
+ * be wiped completely.
+ */
+ if (!add && (adapter->netdev->flags & IFF_PROMISC)) {
+ u32 vlvf, bits;
+ int regndx = igb_find_vlvf_entry(adapter, vid);
+
+ if (regndx < 0)
+ goto out;
+ /* See if any other pools are set for this VLAN filter
+ * entry other than the PF.
+ */
+ vlvf = bits = rd32(E1000_VLVF(regndx));
+ bits &= 1 << (E1000_VLVF_POOLSEL_SHIFT +
+ adapter->vfs_allocated_count);
+ /* If the filter was removed then ensure PF pool bit
+ * is cleared if the PF only added itself to the pool
+ * because the PF is in promiscuous mode.
+ */
+ if ((vlvf & VLAN_VID_MASK) == vid &&
+ !test_bit(vid, adapter->active_vlans) &&
+ !bits)
+ igb_vlvf_set(adapter, vid, add,
+ adapter->vfs_allocated_count);
+ }
+
+out:
+ return err;
+}
+
+static inline void igb_vf_reset(struct igb_adapter *adapter, u32 vf)
+{
+ /* clear flags - except flag that indicates PF has set the MAC */
+ adapter->vf_data[vf].flags &= IGB_VF_FLAG_PF_SET_MAC;
+ adapter->vf_data[vf].last_nack = jiffies;
+
+ /* reset offloads to defaults */
+ igb_set_vmolr(adapter, vf, true);
+
+ /* reset vlans for device */
+ igb_clear_vf_vfta(adapter, vf);
+ if (adapter->vf_data[vf].pf_vlan)
+ igb_ndo_set_vf_vlan(adapter->netdev, vf,
+ adapter->vf_data[vf].pf_vlan,
+ adapter->vf_data[vf].pf_qos);
+ else
+ igb_clear_vf_vfta(adapter, vf);
+
+ /* reset multicast table array for vf */
+ adapter->vf_data[vf].num_vf_mc_hashes = 0;
+
+ /* Flush and reset the mta with the new values */
+ igb_set_rx_mode(adapter->netdev);
+}
+
+static void igb_vf_reset_event(struct igb_adapter *adapter, u32 vf)
+{
+ unsigned char *vf_mac = adapter->vf_data[vf].vf_mac_addresses;
+
+ /* clear mac address as we were hotplug removed/added */
+ if (!(adapter->vf_data[vf].flags & IGB_VF_FLAG_PF_SET_MAC))
+ eth_zero_addr(vf_mac);
+
+ /* process remaining reset events */
+ igb_vf_reset(adapter, vf);
+}
+
+static void igb_vf_reset_msg(struct igb_adapter *adapter, u32 vf)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ unsigned char *vf_mac = adapter->vf_data[vf].vf_mac_addresses;
+ int rar_entry = hw->mac.rar_entry_count - (vf + 1);
+ u32 reg, msgbuf[3];
+ u8 *addr = (u8 *)(&msgbuf[1]);
+
+ /* process all the same items cleared in a function level reset */
+ igb_vf_reset(adapter, vf);
+
+ /* set vf mac address */
+ igb_rar_set_qsel(adapter, vf_mac, rar_entry, vf);
+
+ /* enable transmit and receive for vf */
+ reg = rd32(E1000_VFTE);
+ wr32(E1000_VFTE, reg | (1 << vf));
+ reg = rd32(E1000_VFRE);
+ wr32(E1000_VFRE, reg | (1 << vf));
+
+ adapter->vf_data[vf].flags |= IGB_VF_FLAG_CTS;
+
+ /* reply to reset with ack and vf mac address */
+ if (!is_zero_ether_addr(vf_mac)) {
+ msgbuf[0] = E1000_VF_RESET | E1000_VT_MSGTYPE_ACK;
+ memcpy(addr, vf_mac, ETH_ALEN);
+ } else {
+ msgbuf[0] = E1000_VF_RESET | E1000_VT_MSGTYPE_NACK;
+ }
+ igb_write_mbx(hw, msgbuf, 3, vf);
+}
+
+static int igb_set_vf_mac_addr(struct igb_adapter *adapter, u32 *msg, int vf)
+{
+ /* The VF MAC Address is stored in a packed array of bytes
+ * starting at the second 32 bit word of the msg array
+ */
+ unsigned char *addr = (char *)&msg[1];
+ int err = -1;
+
+ if (is_valid_ether_addr(addr))
+ err = igb_set_vf_mac(adapter, vf, addr);
+
+ return err;
+}
+
+static void igb_rcv_ack_from_vf(struct igb_adapter *adapter, u32 vf)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct vf_data_storage *vf_data = &adapter->vf_data[vf];
+ u32 msg = E1000_VT_MSGTYPE_NACK;
+
+ /* if device isn't clear to send it shouldn't be reading either */
+ if (!(vf_data->flags & IGB_VF_FLAG_CTS) &&
+ time_after(jiffies, vf_data->last_nack + (2 * HZ))) {
+ igb_write_mbx(hw, &msg, 1, vf);
+ vf_data->last_nack = jiffies;
+ }
+}
+
+static void igb_rcv_msg_from_vf(struct igb_adapter *adapter, u32 vf)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ u32 msgbuf[E1000_VFMAILBOX_SIZE];
+ struct e1000_hw *hw = &adapter->hw;
+ struct vf_data_storage *vf_data = &adapter->vf_data[vf];
+ s32 retval;
+
+ retval = igb_read_mbx(hw, msgbuf, E1000_VFMAILBOX_SIZE, vf);
+
+ if (retval) {
+ /* if receive failed revoke VF CTS stats and restart init */
+ dev_err(&pdev->dev, "Error receiving message from VF\n");
+ vf_data->flags &= ~IGB_VF_FLAG_CTS;
+ if (!time_after(jiffies, vf_data->last_nack + (2 * HZ)))
+ return;
+ goto out;
+ }
+
+ /* this is a message we already processed, do nothing */
+ if (msgbuf[0] & (E1000_VT_MSGTYPE_ACK | E1000_VT_MSGTYPE_NACK))
+ return;
+
+ /* until the vf completes a reset it should not be
+ * allowed to start any configuration.
+ */
+ if (msgbuf[0] == E1000_VF_RESET) {
+ igb_vf_reset_msg(adapter, vf);
+ return;
+ }
+
+ if (!(vf_data->flags & IGB_VF_FLAG_CTS)) {
+ if (!time_after(jiffies, vf_data->last_nack + (2 * HZ)))
+ return;
+ retval = -1;
+ goto out;
+ }
+
+ switch ((msgbuf[0] & 0xFFFF)) {
+ case E1000_VF_SET_MAC_ADDR:
+ retval = -EINVAL;
+ if (!(vf_data->flags & IGB_VF_FLAG_PF_SET_MAC))
+ retval = igb_set_vf_mac_addr(adapter, msgbuf, vf);
+ else
+ dev_warn(&pdev->dev,
+ "VF %d attempted to override administratively set MAC address\nReload the VF driver to resume operations\n",
+ vf);
+ break;
+ case E1000_VF_SET_PROMISC:
+ retval = igb_set_vf_promisc(adapter, msgbuf, vf);
+ break;
+ case E1000_VF_SET_MULTICAST:
+ retval = igb_set_vf_multicasts(adapter, msgbuf, vf);
+ break;
+ case E1000_VF_SET_LPE:
+ retval = igb_set_vf_rlpml(adapter, msgbuf[1], vf);
+ break;
+ case E1000_VF_SET_VLAN:
+ retval = -1;
+ if (vf_data->pf_vlan)
+ dev_warn(&pdev->dev,
+ "VF %d attempted to override administratively set VLAN tag\nReload the VF driver to resume operations\n",
+ vf);
+ else
+ retval = igb_set_vf_vlan(adapter, msgbuf, vf);
+ break;
+ default:
+ dev_err(&pdev->dev, "Unhandled Msg %08x\n", msgbuf[0]);
+ retval = -1;
+ break;
+ }
+
+ msgbuf[0] |= E1000_VT_MSGTYPE_CTS;
+out:
+ /* notify the VF of the results of what it sent us */
+ if (retval)
+ msgbuf[0] |= E1000_VT_MSGTYPE_NACK;
+ else
+ msgbuf[0] |= E1000_VT_MSGTYPE_ACK;
+
+ igb_write_mbx(hw, msgbuf, 1, vf);
+}
+
+static void igb_msg_task(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 vf;
+
+ for (vf = 0; vf < adapter->vfs_allocated_count; vf++) {
+ /* process any reset requests */
+ if (!igb_check_for_rst(hw, vf))
+ igb_vf_reset_event(adapter, vf);
+
+ /* process any messages pending */
+ if (!igb_check_for_msg(hw, vf))
+ igb_rcv_msg_from_vf(adapter, vf);
+
+ /* process any acks */
+ if (!igb_check_for_ack(hw, vf))
+ igb_rcv_ack_from_vf(adapter, vf);
+ }
+}
+
+/**
+ * igb_set_uta - Set unicast filter table address
+ * @adapter: board private structure
+ *
+ * The unicast table address is a register array of 32-bit registers.
+ * The table is meant to be used in a way similar to how the MTA is used
+ * however due to certain limitations in the hardware it is necessary to
+ * set all the hash bits to 1 and use the VMOLR ROPE bit as a promiscuous
+ * enable bit to allow vlan tag stripping when promiscuous mode is enabled
+ **/
+static void igb_set_uta(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ int i;
+
+ /* The UTA table only exists on 82576 hardware and newer */
+ if (hw->mac.type < e1000_82576)
+ return;
+
+ /* we only need to do this if VMDq is enabled */
+ if (!adapter->vfs_allocated_count)
+ return;
+
+ for (i = 0; i < hw->mac.uta_reg_count; i++)
+ array_wr32(E1000_UTA, i, ~0);
+}
+
+/**
+ * igb_intr_msi - Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a network interface device structure
+ **/
+static irqreturn_t igb_intr_msi(int irq, void *data)
+{
+ struct igb_adapter *adapter = data;
+ struct igb_q_vector *q_vector = adapter->q_vector[0];
+ struct e1000_hw *hw = &adapter->hw;
+ /* read ICR disables interrupts using IAM */
+ u32 icr = rd32(E1000_ICR);
+
+ igb_write_itr(q_vector);
+
+ if (icr & E1000_ICR_DRSTA)
+ schedule_work(&adapter->reset_task);
+
+ if (icr & E1000_ICR_DOUTSYNC) {
+ /* HW is reporting DMA is out of sync */
+ adapter->stats.doosync++;
+ }
+
+ if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) {
+ hw->mac.get_link_status = 1;
+ if (!test_bit(__IGB_DOWN, &adapter->state))
+ mod_timer(&adapter->watchdog_timer, jiffies + 1);
+ }
+
+ if (icr & E1000_ICR_TS)
+ igb_tsync_interrupt(adapter);
+
+ napi_schedule(&q_vector->napi);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * igb_intr - Legacy Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a network interface device structure
+ **/
+static irqreturn_t igb_intr(int irq, void *data)
+{
+ struct igb_adapter *adapter = data;
+ struct igb_q_vector *q_vector = adapter->q_vector[0];
+ struct e1000_hw *hw = &adapter->hw;
+ /* Interrupt Auto-Mask...upon reading ICR, interrupts are masked. No
+ * need for the IMC write
+ */
+ u32 icr = rd32(E1000_ICR);
+
+ /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
+ * not set, then the adapter didn't send an interrupt
+ */
+ if (!(icr & E1000_ICR_INT_ASSERTED))
+ return IRQ_NONE;
+
+ igb_write_itr(q_vector);
+
+ if (icr & E1000_ICR_DRSTA)
+ schedule_work(&adapter->reset_task);
+
+ if (icr & E1000_ICR_DOUTSYNC) {
+ /* HW is reporting DMA is out of sync */
+ adapter->stats.doosync++;
+ }
+
+ if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) {
+ hw->mac.get_link_status = 1;
+ /* guard against interrupt when we're going down */
+ if (!test_bit(__IGB_DOWN, &adapter->state))
+ mod_timer(&adapter->watchdog_timer, jiffies + 1);
+ }
+
+ if (icr & E1000_ICR_TS)
+ igb_tsync_interrupt(adapter);
+
+ napi_schedule(&q_vector->napi);
+
+ return IRQ_HANDLED;
+}
+
+static void igb_ring_irq_enable(struct igb_q_vector *q_vector)
+{
+ struct igb_adapter *adapter = q_vector->adapter;
+ struct e1000_hw *hw = &adapter->hw;
+
+ if ((q_vector->rx.ring && (adapter->rx_itr_setting & 3)) ||
+ (!q_vector->rx.ring && (adapter->tx_itr_setting & 3))) {
+ if ((adapter->num_q_vectors == 1) && !adapter->vf_data)
+ igb_set_itr(q_vector);
+ else
+ igb_update_ring_itr(q_vector);
+ }
+
+ if (!test_bit(__IGB_DOWN, &adapter->state)) {
+ if (adapter->flags & IGB_FLAG_HAS_MSIX)
+ wr32(E1000_EIMS, q_vector->eims_value);
+ else
+ igb_irq_enable(adapter);
+ }
+}
+
+/**
+ * igb_poll - NAPI Rx polling callback
+ * @napi: napi polling structure
+ * @budget: count of how many packets we should handle
+ **/
+static int igb_poll(struct napi_struct *napi, int budget)
+{
+ struct igb_q_vector *q_vector = container_of(napi,
+ struct igb_q_vector,
+ napi);
+ bool clean_complete = true;
+
+#ifdef CONFIG_IGB_DCA
+ if (q_vector->adapter->flags & IGB_FLAG_DCA_ENABLED)
+ igb_update_dca(q_vector);
+#endif
+ if (q_vector->tx.ring)
+ clean_complete = igb_clean_tx_irq(q_vector);
+
+ if (q_vector->rx.ring)
+ clean_complete &= igb_clean_rx_irq(q_vector, budget);
+
+ /* If all work not completed, return budget and keep polling */
+ if (!clean_complete)
+ return budget;
+
+ /* If not enough Rx work done, exit the polling mode */
+ napi_complete(napi);
+ igb_ring_irq_enable(q_vector);
+
+ return 0;
+}
+
+/**
+ * igb_clean_tx_irq - Reclaim resources after transmit completes
+ * @q_vector: pointer to q_vector containing needed info
+ *
+ * returns true if ring is completely cleaned
+ **/
+static bool igb_clean_tx_irq(struct igb_q_vector *q_vector)
+{
+ struct igb_adapter *adapter = q_vector->adapter;
+ struct igb_ring *tx_ring = q_vector->tx.ring;
+ struct igb_tx_buffer *tx_buffer;
+ union e1000_adv_tx_desc *tx_desc;
+ unsigned int total_bytes = 0, total_packets = 0;
+ unsigned int budget = q_vector->tx.work_limit;
+ unsigned int i = tx_ring->next_to_clean;
+
+ if (test_bit(__IGB_DOWN, &adapter->state))
+ return true;
+
+ tx_buffer = &tx_ring->tx_buffer_info[i];
+ tx_desc = IGB_TX_DESC(tx_ring, i);
+ i -= tx_ring->count;
+
+ do {
+ union e1000_adv_tx_desc *eop_desc = tx_buffer->next_to_watch;
+
+ /* if next_to_watch is not set then there is no work pending */
+ if (!eop_desc)
+ break;
+
+ /* prevent any other reads prior to eop_desc */
+ read_barrier_depends();
+
+ /* if DD is not set pending work has not been completed */
+ if (!(eop_desc->wb.status & cpu_to_le32(E1000_TXD_STAT_DD)))
+ break;
+
+ /* clear next_to_watch to prevent false hangs */
+ tx_buffer->next_to_watch = NULL;
+
+ /* update the statistics for this packet */
+ total_bytes += tx_buffer->bytecount;
+ total_packets += tx_buffer->gso_segs;
+
+ /* free the skb */
+ dev_consume_skb_any(tx_buffer->skb);
+
+ /* unmap skb header data */
+ dma_unmap_single(tx_ring->dev,
+ dma_unmap_addr(tx_buffer, dma),
+ dma_unmap_len(tx_buffer, len),
+ DMA_TO_DEVICE);
+
+ /* clear tx_buffer data */
+ tx_buffer->skb = NULL;
+ dma_unmap_len_set(tx_buffer, len, 0);
+
+ /* clear last DMA location and unmap remaining buffers */
+ while (tx_desc != eop_desc) {
+ tx_buffer++;
+ tx_desc++;
+ i++;
+ if (unlikely(!i)) {
+ i -= tx_ring->count;
+ tx_buffer = tx_ring->tx_buffer_info;
+ tx_desc = IGB_TX_DESC(tx_ring, 0);
+ }
+
+ /* unmap any remaining paged data */
+ if (dma_unmap_len(tx_buffer, len)) {
+ dma_unmap_page(tx_ring->dev,
+ dma_unmap_addr(tx_buffer, dma),
+ dma_unmap_len(tx_buffer, len),
+ DMA_TO_DEVICE);
+ dma_unmap_len_set(tx_buffer, len, 0);
+ }
+ }
+
+ /* move us one more past the eop_desc for start of next pkt */
+ tx_buffer++;
+ tx_desc++;
+ i++;
+ if (unlikely(!i)) {
+ i -= tx_ring->count;
+ tx_buffer = tx_ring->tx_buffer_info;
+ tx_desc = IGB_TX_DESC(tx_ring, 0);
+ }
+
+ /* issue prefetch for next Tx descriptor */
+ prefetch(tx_desc);
+
+ /* update budget accounting */
+ budget--;
+ } while (likely(budget));
+
+ netdev_tx_completed_queue(txring_txq(tx_ring),
+ total_packets, total_bytes);
+ i += tx_ring->count;
+ tx_ring->next_to_clean = i;
+ u64_stats_update_begin(&tx_ring->tx_syncp);
+ tx_ring->tx_stats.bytes += total_bytes;
+ tx_ring->tx_stats.packets += total_packets;
+ u64_stats_update_end(&tx_ring->tx_syncp);
+ q_vector->tx.total_bytes += total_bytes;
+ q_vector->tx.total_packets += total_packets;
+
+ if (test_bit(IGB_RING_FLAG_TX_DETECT_HANG, &tx_ring->flags)) {
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* Detect a transmit hang in hardware, this serializes the
+ * check with the clearing of time_stamp and movement of i
+ */
+ clear_bit(IGB_RING_FLAG_TX_DETECT_HANG, &tx_ring->flags);
+ if (tx_buffer->next_to_watch &&
+ time_after(jiffies, tx_buffer->time_stamp +
+ (adapter->tx_timeout_factor * HZ)) &&
+ !(rd32(E1000_STATUS) & E1000_STATUS_TXOFF)) {
+
+ /* detected Tx unit hang */
+ dev_err(tx_ring->dev,
+ "Detected Tx Unit Hang\n"
+ " Tx Queue <%d>\n"
+ " TDH <%x>\n"
+ " TDT <%x>\n"
+ " next_to_use <%x>\n"
+ " next_to_clean <%x>\n"
+ "buffer_info[next_to_clean]\n"
+ " time_stamp <%lx>\n"
+ " next_to_watch <%p>\n"
+ " jiffies <%lx>\n"
+ " desc.status <%x>\n",
+ tx_ring->queue_index,
+ rd32(E1000_TDH(tx_ring->reg_idx)),
+ readl(tx_ring->tail),
+ tx_ring->next_to_use,
+ tx_ring->next_to_clean,
+ tx_buffer->time_stamp,
+ tx_buffer->next_to_watch,
+ jiffies,
+ tx_buffer->next_to_watch->wb.status);
+ netif_stop_subqueue(tx_ring->netdev,
+ tx_ring->queue_index);
+
+ /* we are about to reset, no point in enabling stuff */
+ return true;
+ }
+ }
+
+#define TX_WAKE_THRESHOLD (DESC_NEEDED * 2)
+ if (unlikely(total_packets &&
+ netif_carrier_ok(tx_ring->netdev) &&
+ igb_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD)) {
+ /* Make sure that anybody stopping the queue after this
+ * sees the new next_to_clean.
+ */
+ smp_mb();
+ if (__netif_subqueue_stopped(tx_ring->netdev,
+ tx_ring->queue_index) &&
+ !(test_bit(__IGB_DOWN, &adapter->state))) {
+ netif_wake_subqueue(tx_ring->netdev,
+ tx_ring->queue_index);
+
+ u64_stats_update_begin(&tx_ring->tx_syncp);
+ tx_ring->tx_stats.restart_queue++;
+ u64_stats_update_end(&tx_ring->tx_syncp);
+ }
+ }
+
+ return !!budget;
+}
+
+/**
+ * igb_reuse_rx_page - page flip buffer and store it back on the ring
+ * @rx_ring: rx descriptor ring to store buffers on
+ * @old_buff: donor buffer to have page reused
+ *
+ * Synchronizes page for reuse by the adapter
+ **/
+static void igb_reuse_rx_page(struct igb_ring *rx_ring,
+ struct igb_rx_buffer *old_buff)
+{
+ struct igb_rx_buffer *new_buff;
+ u16 nta = rx_ring->next_to_alloc;
+
+ new_buff = &rx_ring->rx_buffer_info[nta];
+
+ /* update, and store next to alloc */
+ nta++;
+ rx_ring->next_to_alloc = (nta < rx_ring->count) ? nta : 0;
+
+ /* transfer page from old buffer to new buffer */
+ *new_buff = *old_buff;
+
+ /* sync the buffer for use by the device */
+ dma_sync_single_range_for_device(rx_ring->dev, old_buff->dma,
+ old_buff->page_offset,
+ IGB_RX_BUFSZ,
+ DMA_FROM_DEVICE);
+}
+
+static inline bool igb_page_is_reserved(struct page *page)
+{
+ return (page_to_nid(page) != numa_mem_id()) || page->pfmemalloc;
+}
+
+static bool igb_can_reuse_rx_page(struct igb_rx_buffer *rx_buffer,
+ struct page *page,
+ unsigned int truesize)
+{
+ /* avoid re-using remote pages */
+ if (unlikely(igb_page_is_reserved(page)))
+ return false;
+
+#if (PAGE_SIZE < 8192)
+ /* if we are only owner of page we can reuse it */
+ if (unlikely(page_count(page) != 1))
+ return false;
+
+ /* flip page offset to other buffer */
+ rx_buffer->page_offset ^= IGB_RX_BUFSZ;
+#else
+ /* move offset up to the next cache line */
+ rx_buffer->page_offset += truesize;
+
+ if (rx_buffer->page_offset > (PAGE_SIZE - IGB_RX_BUFSZ))
+ return false;
+#endif
+
+ /* Even if we own the page, we are not allowed to use atomic_set()
+ * This would break get_page_unless_zero() users.
+ */
+ atomic_inc(&page->_count);
+
+ return true;
+}
+
+/**
+ * igb_add_rx_frag - Add contents of Rx buffer to sk_buff
+ * @rx_ring: rx descriptor ring to transact packets on
+ * @rx_buffer: buffer containing page to add
+ * @rx_desc: descriptor containing length of buffer written by hardware
+ * @skb: sk_buff to place the data into
+ *
+ * This function will add the data contained in rx_buffer->page to the skb.
+ * This is done either through a direct copy if the data in the buffer is
+ * less than the skb header size, otherwise it will just attach the page as
+ * a frag to the skb.
+ *
+ * The function will then update the page offset if necessary and return
+ * true if the buffer can be reused by the adapter.
+ **/
+static bool igb_add_rx_frag(struct igb_ring *rx_ring,
+ struct igb_rx_buffer *rx_buffer,
+ union e1000_adv_rx_desc *rx_desc,
+ struct sk_buff *skb)
+{
+ struct page *page = rx_buffer->page;
+ unsigned int size = le16_to_cpu(rx_desc->wb.upper.length);
+#if (PAGE_SIZE < 8192)
+ unsigned int truesize = IGB_RX_BUFSZ;
+#else
+ unsigned int truesize = ALIGN(size, L1_CACHE_BYTES);
+#endif
+
+ if ((size <= IGB_RX_HDR_LEN) && !skb_is_nonlinear(skb)) {
+ unsigned char *va = page_address(page) + rx_buffer->page_offset;
+
+ if (igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TSIP)) {
+ igb_ptp_rx_pktstamp(rx_ring->q_vector, va, skb);
+ va += IGB_TS_HDR_LEN;
+ size -= IGB_TS_HDR_LEN;
+ }
+
+ memcpy(__skb_put(skb, size), va, ALIGN(size, sizeof(long)));
+
+ /* page is not reserved, we can reuse buffer as-is */
+ if (likely(!igb_page_is_reserved(page)))
+ return true;
+
+ /* this page cannot be reused so discard it */
+ __free_page(page);
+ return false;
+ }
+
+ skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page,
+ rx_buffer->page_offset, size, truesize);
+
+ return igb_can_reuse_rx_page(rx_buffer, page, truesize);
+}
+
+static struct sk_buff *igb_fetch_rx_buffer(struct igb_ring *rx_ring,
+ union e1000_adv_rx_desc *rx_desc,
+ struct sk_buff *skb)
+{
+ struct igb_rx_buffer *rx_buffer;
+ struct page *page;
+
+ rx_buffer = &rx_ring->rx_buffer_info[rx_ring->next_to_clean];
+ page = rx_buffer->page;
+ prefetchw(page);
+
+ if (likely(!skb)) {
+ void *page_addr = page_address(page) +
+ rx_buffer->page_offset;
+
+ /* prefetch first cache line of first page */
+ prefetch(page_addr);
+#if L1_CACHE_BYTES < 128
+ prefetch(page_addr + L1_CACHE_BYTES);
+#endif
+
+ /* allocate a skb to store the frags */
+ skb = napi_alloc_skb(&rx_ring->q_vector->napi, IGB_RX_HDR_LEN);
+ if (unlikely(!skb)) {
+ rx_ring->rx_stats.alloc_failed++;
+ return NULL;
+ }
+
+ /* we will be copying header into skb->data in
+ * pskb_may_pull so it is in our interest to prefetch
+ * it now to avoid a possible cache miss
+ */
+ prefetchw(skb->data);
+ }
+
+ /* we are reusing so sync this buffer for CPU use */
+ dma_sync_single_range_for_cpu(rx_ring->dev,
+ rx_buffer->dma,
+ rx_buffer->page_offset,
+ IGB_RX_BUFSZ,
+ DMA_FROM_DEVICE);
+
+ /* pull page into skb */
+ if (igb_add_rx_frag(rx_ring, rx_buffer, rx_desc, skb)) {
+ /* hand second half of page back to the ring */
+ igb_reuse_rx_page(rx_ring, rx_buffer);
+ } else {
+ /* we are not reusing the buffer so unmap it */
+ dma_unmap_page(rx_ring->dev, rx_buffer->dma,
+ PAGE_SIZE, DMA_FROM_DEVICE);
+ }
+
+ /* clear contents of rx_buffer */
+ rx_buffer->page = NULL;
+
+ return skb;
+}
+
+static inline void igb_rx_checksum(struct igb_ring *ring,
+ union e1000_adv_rx_desc *rx_desc,
+ struct sk_buff *skb)
+{
+ skb_checksum_none_assert(skb);
+
+ /* Ignore Checksum bit is set */
+ if (igb_test_staterr(rx_desc, E1000_RXD_STAT_IXSM))
+ return;
+
+ /* Rx checksum disabled via ethtool */
+ if (!(ring->netdev->features & NETIF_F_RXCSUM))
+ return;
+
+ /* TCP/UDP checksum error bit is set */
+ if (igb_test_staterr(rx_desc,
+ E1000_RXDEXT_STATERR_TCPE |
+ E1000_RXDEXT_STATERR_IPE)) {
+ /* work around errata with sctp packets where the TCPE aka
+ * L4E bit is set incorrectly on 64 byte (60 byte w/o crc)
+ * packets, (aka let the stack check the crc32c)
+ */
+ if (!((skb->len == 60) &&
+ test_bit(IGB_RING_FLAG_RX_SCTP_CSUM, &ring->flags))) {
+ u64_stats_update_begin(&ring->rx_syncp);
+ ring->rx_stats.csum_err++;
+ u64_stats_update_end(&ring->rx_syncp);
+ }
+ /* let the stack verify checksum errors */
+ return;
+ }
+ /* It must be a TCP or UDP packet with a valid checksum */
+ if (igb_test_staterr(rx_desc, E1000_RXD_STAT_TCPCS |
+ E1000_RXD_STAT_UDPCS))
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+ dev_dbg(ring->dev, "cksum success: bits %08X\n",
+ le32_to_cpu(rx_desc->wb.upper.status_error));
+}
+
+static inline void igb_rx_hash(struct igb_ring *ring,
+ union e1000_adv_rx_desc *rx_desc,
+ struct sk_buff *skb)
+{
+ if (ring->netdev->features & NETIF_F_RXHASH)
+ skb_set_hash(skb,
+ le32_to_cpu(rx_desc->wb.lower.hi_dword.rss),
+ PKT_HASH_TYPE_L3);
+}
+
+/**
+ * igb_is_non_eop - process handling of non-EOP buffers
+ * @rx_ring: Rx ring being processed
+ * @rx_desc: Rx descriptor for current buffer
+ * @skb: current socket buffer containing buffer in progress
+ *
+ * This function updates next to clean. If the buffer is an EOP buffer
+ * this function exits returning false, otherwise it will place the
+ * sk_buff in the next buffer to be chained and return true indicating
+ * that this is in fact a non-EOP buffer.
+ **/
+static bool igb_is_non_eop(struct igb_ring *rx_ring,
+ union e1000_adv_rx_desc *rx_desc)
+{
+ u32 ntc = rx_ring->next_to_clean + 1;
+
+ /* fetch, update, and store next to clean */
+ ntc = (ntc < rx_ring->count) ? ntc : 0;
+ rx_ring->next_to_clean = ntc;
+
+ prefetch(IGB_RX_DESC(rx_ring, ntc));
+
+ if (likely(igb_test_staterr(rx_desc, E1000_RXD_STAT_EOP)))
+ return false;
+
+ return true;
+}
+
+/**
+ * igb_pull_tail - igb specific version of skb_pull_tail
+ * @rx_ring: rx descriptor ring packet is being transacted on
+ * @rx_desc: pointer to the EOP Rx descriptor
+ * @skb: pointer to current skb being adjusted
+ *
+ * This function is an igb specific version of __pskb_pull_tail. The
+ * main difference between this version and the original function is that
+ * this function can make several assumptions about the state of things
+ * that allow for significant optimizations versus the standard function.
+ * As a result we can do things like drop a frag and maintain an accurate
+ * truesize for the skb.
+ */
+static void igb_pull_tail(struct igb_ring *rx_ring,
+ union e1000_adv_rx_desc *rx_desc,
+ struct sk_buff *skb)
+{
+ struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[0];
+ unsigned char *va;
+ unsigned int pull_len;
+
+ /* it is valid to use page_address instead of kmap since we are
+ * working with pages allocated out of the lomem pool per
+ * alloc_page(GFP_ATOMIC)
+ */
+ va = skb_frag_address(frag);
+
+ if (igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TSIP)) {
+ /* retrieve timestamp from buffer */
+ igb_ptp_rx_pktstamp(rx_ring->q_vector, va, skb);
+
+ /* update pointers to remove timestamp header */
+ skb_frag_size_sub(frag, IGB_TS_HDR_LEN);
+ frag->page_offset += IGB_TS_HDR_LEN;
+ skb->data_len -= IGB_TS_HDR_LEN;
+ skb->len -= IGB_TS_HDR_LEN;
+
+ /* move va to start of packet data */
+ va += IGB_TS_HDR_LEN;
+ }
+
+ /* we need the header to contain the greater of either ETH_HLEN or
+ * 60 bytes if the skb->len is less than 60 for skb_pad.
+ */
+ pull_len = eth_get_headlen(va, IGB_RX_HDR_LEN);
+
+ /* align pull length to size of long to optimize memcpy performance */
+ skb_copy_to_linear_data(skb, va, ALIGN(pull_len, sizeof(long)));
+
+ /* update all of the pointers */
+ skb_frag_size_sub(frag, pull_len);
+ frag->page_offset += pull_len;
+ skb->data_len -= pull_len;
+ skb->tail += pull_len;
+}
+
+/**
+ * igb_cleanup_headers - Correct corrupted or empty headers
+ * @rx_ring: rx descriptor ring packet is being transacted on
+ * @rx_desc: pointer to the EOP Rx descriptor
+ * @skb: pointer to current skb being fixed
+ *
+ * Address the case where we are pulling data in on pages only
+ * and as such no data is present in the skb header.
+ *
+ * In addition if skb is not at least 60 bytes we need to pad it so that
+ * it is large enough to qualify as a valid Ethernet frame.
+ *
+ * Returns true if an error was encountered and skb was freed.
+ **/
+static bool igb_cleanup_headers(struct igb_ring *rx_ring,
+ union e1000_adv_rx_desc *rx_desc,
+ struct sk_buff *skb)
+{
+ if (unlikely((igb_test_staterr(rx_desc,
+ E1000_RXDEXT_ERR_FRAME_ERR_MASK)))) {
+ struct net_device *netdev = rx_ring->netdev;
+ if (!(netdev->features & NETIF_F_RXALL)) {
+ dev_kfree_skb_any(skb);
+ return true;
+ }
+ }
+
+ /* place header in linear portion of buffer */
+ if (skb_is_nonlinear(skb))
+ igb_pull_tail(rx_ring, rx_desc, skb);
+
+ /* if eth_skb_pad returns an error the skb was freed */
+ if (eth_skb_pad(skb))
+ return true;
+
+ return false;
+}
+
+/**
+ * igb_process_skb_fields - Populate skb header fields from Rx descriptor
+ * @rx_ring: rx descriptor ring packet is being transacted on
+ * @rx_desc: pointer to the EOP Rx descriptor
+ * @skb: pointer to current skb being populated
+ *
+ * This function checks the ring, descriptor, and packet information in
+ * order to populate the hash, checksum, VLAN, timestamp, protocol, and
+ * other fields within the skb.
+ **/
+static void igb_process_skb_fields(struct igb_ring *rx_ring,
+ union e1000_adv_rx_desc *rx_desc,
+ struct sk_buff *skb)
+{
+ struct net_device *dev = rx_ring->netdev;
+
+ igb_rx_hash(rx_ring, rx_desc, skb);
+
+ igb_rx_checksum(rx_ring, rx_desc, skb);
+
+ if (igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TS) &&
+ !igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TSIP))
+ igb_ptp_rx_rgtstamp(rx_ring->q_vector, skb);
+
+ if ((dev->features & NETIF_F_HW_VLAN_CTAG_RX) &&
+ igb_test_staterr(rx_desc, E1000_RXD_STAT_VP)) {
+ u16 vid;
+
+ if (igb_test_staterr(rx_desc, E1000_RXDEXT_STATERR_LB) &&
+ test_bit(IGB_RING_FLAG_RX_LB_VLAN_BSWAP, &rx_ring->flags))
+ vid = be16_to_cpu(rx_desc->wb.upper.vlan);
+ else
+ vid = le16_to_cpu(rx_desc->wb.upper.vlan);
+
+ __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vid);
+ }
+
+ skb_record_rx_queue(skb, rx_ring->queue_index);
+
+ skb->protocol = eth_type_trans(skb, rx_ring->netdev);
+}
+
+static bool igb_clean_rx_irq(struct igb_q_vector *q_vector, const int budget)
+{
+ struct igb_ring *rx_ring = q_vector->rx.ring;
+ struct sk_buff *skb = rx_ring->skb;
+ unsigned int total_bytes = 0, total_packets = 0;
+ u16 cleaned_count = igb_desc_unused(rx_ring);
+
+ while (likely(total_packets < budget)) {
+ union e1000_adv_rx_desc *rx_desc;
+
+ /* return some buffers to hardware, one at a time is too slow */
+ if (cleaned_count >= IGB_RX_BUFFER_WRITE) {
+ igb_alloc_rx_buffers(rx_ring, cleaned_count);
+ cleaned_count = 0;
+ }
+
+ rx_desc = IGB_RX_DESC(rx_ring, rx_ring->next_to_clean);
+
+ if (!rx_desc->wb.upper.status_error)
+ break;
+
+ /* This memory barrier is needed to keep us from reading
+ * any other fields out of the rx_desc until we know the
+ * descriptor has been written back
+ */
+ dma_rmb();
+
+ /* retrieve a buffer from the ring */
+ skb = igb_fetch_rx_buffer(rx_ring, rx_desc, skb);
+
+ /* exit if we failed to retrieve a buffer */
+ if (!skb)
+ break;
+
+ cleaned_count++;
+
+ /* fetch next buffer in frame if non-eop */
+ if (igb_is_non_eop(rx_ring, rx_desc))
+ continue;
+
+ /* verify the packet layout is correct */
+ if (igb_cleanup_headers(rx_ring, rx_desc, skb)) {
+ skb = NULL;
+ continue;
+ }
+
+ /* probably a little skewed due to removing CRC */
+ total_bytes += skb->len;
+
+ /* populate checksum, timestamp, VLAN, and protocol */
+ igb_process_skb_fields(rx_ring, rx_desc, skb);
+
+ napi_gro_receive(&q_vector->napi, skb);
+
+ /* reset skb pointer */
+ skb = NULL;
+
+ /* update budget accounting */
+ total_packets++;
+ }
+
+ /* place incomplete frames back on ring for completion */
+ rx_ring->skb = skb;
+
+ u64_stats_update_begin(&rx_ring->rx_syncp);
+ rx_ring->rx_stats.packets += total_packets;
+ rx_ring->rx_stats.bytes += total_bytes;
+ u64_stats_update_end(&rx_ring->rx_syncp);
+ q_vector->rx.total_packets += total_packets;
+ q_vector->rx.total_bytes += total_bytes;
+
+ if (cleaned_count)
+ igb_alloc_rx_buffers(rx_ring, cleaned_count);
+
+ return total_packets < budget;
+}
+
+static bool igb_alloc_mapped_page(struct igb_ring *rx_ring,
+ struct igb_rx_buffer *bi)
+{
+ struct page *page = bi->page;
+ dma_addr_t dma;
+
+ /* since we are recycling buffers we should seldom need to alloc */
+ if (likely(page))
+ return true;
+
+ /* alloc new page for storage */
+ page = dev_alloc_page();
+ if (unlikely(!page)) {
+ rx_ring->rx_stats.alloc_failed++;
+ return false;
+ }
+
+ /* map page for use */
+ dma = dma_map_page(rx_ring->dev, page, 0, PAGE_SIZE, DMA_FROM_DEVICE);
+
+ /* if mapping failed free memory back to system since
+ * there isn't much point in holding memory we can't use
+ */
+ if (dma_mapping_error(rx_ring->dev, dma)) {
+ __free_page(page);
+
+ rx_ring->rx_stats.alloc_failed++;
+ return false;
+ }
+
+ bi->dma = dma;
+ bi->page = page;
+ bi->page_offset = 0;
+
+ return true;
+}
+
+/**
+ * igb_alloc_rx_buffers - Replace used receive buffers; packet split
+ * @adapter: address of board private structure
+ **/
+void igb_alloc_rx_buffers(struct igb_ring *rx_ring, u16 cleaned_count)
+{
+ union e1000_adv_rx_desc *rx_desc;
+ struct igb_rx_buffer *bi;
+ u16 i = rx_ring->next_to_use;
+
+ /* nothing to do */
+ if (!cleaned_count)
+ return;
+
+ rx_desc = IGB_RX_DESC(rx_ring, i);
+ bi = &rx_ring->rx_buffer_info[i];
+ i -= rx_ring->count;
+
+ do {
+ if (!igb_alloc_mapped_page(rx_ring, bi))
+ break;
+
+ /* Refresh the desc even if buffer_addrs didn't change
+ * because each write-back erases this info.
+ */
+ rx_desc->read.pkt_addr = cpu_to_le64(bi->dma + bi->page_offset);
+
+ rx_desc++;
+ bi++;
+ i++;
+ if (unlikely(!i)) {
+ rx_desc = IGB_RX_DESC(rx_ring, 0);
+ bi = rx_ring->rx_buffer_info;
+ i -= rx_ring->count;
+ }
+
+ /* clear the status bits for the next_to_use descriptor */
+ rx_desc->wb.upper.status_error = 0;
+
+ cleaned_count--;
+ } while (cleaned_count);
+
+ i += rx_ring->count;
+
+ if (rx_ring->next_to_use != i) {
+ /* record the next descriptor to use */
+ rx_ring->next_to_use = i;
+
+ /* update next to alloc since we have filled the ring */
+ rx_ring->next_to_alloc = i;
+
+ /* Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64).
+ */
+ wmb();
+ writel(i, rx_ring->tail);
+ }
+}
+
+/**
+ * igb_mii_ioctl -
+ * @netdev:
+ * @ifreq:
+ * @cmd:
+ **/
+static int igb_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct mii_ioctl_data *data = if_mii(ifr);
+
+ if (adapter->hw.phy.media_type != e1000_media_type_copper)
+ return -EOPNOTSUPP;
+
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ data->phy_id = adapter->hw.phy.addr;
+ break;
+ case SIOCGMIIREG:
+ if (igb_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
+ &data->val_out))
+ return -EIO;
+ break;
+ case SIOCSMIIREG:
+ default:
+ return -EOPNOTSUPP;
+ }
+ return 0;
+}
+
+/**
+ * igb_ioctl -
+ * @netdev:
+ * @ifreq:
+ * @cmd:
+ **/
+static int igb_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ case SIOCGMIIREG:
+ case SIOCSMIIREG:
+ return igb_mii_ioctl(netdev, ifr, cmd);
+ case SIOCGHWTSTAMP:
+ return igb_ptp_get_ts_config(netdev, ifr);
+ case SIOCSHWTSTAMP:
+ return igb_ptp_set_ts_config(netdev, ifr);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+void igb_read_pci_cfg(struct e1000_hw *hw, u32 reg, u16 *value)
+{
+ struct igb_adapter *adapter = hw->back;
+
+ pci_read_config_word(adapter->pdev, reg, value);
+}
+
+void igb_write_pci_cfg(struct e1000_hw *hw, u32 reg, u16 *value)
+{
+ struct igb_adapter *adapter = hw->back;
+
+ pci_write_config_word(adapter->pdev, reg, *value);
+}
+
+s32 igb_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value)
+{
+ struct igb_adapter *adapter = hw->back;
+
+ if (pcie_capability_read_word(adapter->pdev, reg, value))
+ return -E1000_ERR_CONFIG;
+
+ return 0;
+}
+
+s32 igb_write_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value)
+{
+ struct igb_adapter *adapter = hw->back;
+
+ if (pcie_capability_write_word(adapter->pdev, reg, *value))
+ return -E1000_ERR_CONFIG;
+
+ return 0;
+}
+
+static void igb_vlan_mode(struct net_device *netdev, netdev_features_t features)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl, rctl;
+ bool enable = !!(features & NETIF_F_HW_VLAN_CTAG_RX);
+
+ if (enable) {
+ /* enable VLAN tag insert/strip */
+ ctrl = rd32(E1000_CTRL);
+ ctrl |= E1000_CTRL_VME;
+ wr32(E1000_CTRL, ctrl);
+
+ /* Disable CFI check */
+ rctl = rd32(E1000_RCTL);
+ rctl &= ~E1000_RCTL_CFIEN;
+ wr32(E1000_RCTL, rctl);
+ } else {
+ /* disable VLAN tag insert/strip */
+ ctrl = rd32(E1000_CTRL);
+ ctrl &= ~E1000_CTRL_VME;
+ wr32(E1000_CTRL, ctrl);
+ }
+
+ igb_rlpml_set(adapter);
+}
+
+static int igb_vlan_rx_add_vid(struct net_device *netdev,
+ __be16 proto, u16 vid)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int pf_id = adapter->vfs_allocated_count;
+
+ /* attempt to add filter to vlvf array */
+ igb_vlvf_set(adapter, vid, true, pf_id);
+
+ /* add the filter since PF can receive vlans w/o entry in vlvf */
+ igb_vfta_set(hw, vid, true);
+
+ set_bit(vid, adapter->active_vlans);
+
+ return 0;
+}
+
+static int igb_vlan_rx_kill_vid(struct net_device *netdev,
+ __be16 proto, u16 vid)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int pf_id = adapter->vfs_allocated_count;
+ s32 err;
+
+ /* remove vlan from VLVF table array */
+ err = igb_vlvf_set(adapter, vid, false, pf_id);
+
+ /* if vid was not present in VLVF just remove it from table */
+ if (err)
+ igb_vfta_set(hw, vid, false);
+
+ clear_bit(vid, adapter->active_vlans);
+
+ return 0;
+}
+
+static void igb_restore_vlan(struct igb_adapter *adapter)
+{
+ u16 vid;
+
+ igb_vlan_mode(adapter->netdev, adapter->netdev->features);
+
+ for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
+ igb_vlan_rx_add_vid(adapter->netdev, htons(ETH_P_8021Q), vid);
+}
+
+int igb_set_spd_dplx(struct igb_adapter *adapter, u32 spd, u8 dplx)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_mac_info *mac = &adapter->hw.mac;
+
+ mac->autoneg = 0;
+
+ /* Make sure dplx is at most 1 bit and lsb of speed is not set
+ * for the switch() below to work
+ */
+ if ((spd & 1) || (dplx & ~1))
+ goto err_inval;
+
+ /* Fiber NIC's only allow 1000 gbps Full duplex
+ * and 100Mbps Full duplex for 100baseFx sfp
+ */
+ if (adapter->hw.phy.media_type == e1000_media_type_internal_serdes) {
+ switch (spd + dplx) {
+ case SPEED_10 + DUPLEX_HALF:
+ case SPEED_10 + DUPLEX_FULL:
+ case SPEED_100 + DUPLEX_HALF:
+ goto err_inval;
+ default:
+ break;
+ }
+ }
+
+ switch (spd + dplx) {
+ case SPEED_10 + DUPLEX_HALF:
+ mac->forced_speed_duplex = ADVERTISE_10_HALF;
+ break;
+ case SPEED_10 + DUPLEX_FULL:
+ mac->forced_speed_duplex = ADVERTISE_10_FULL;
+ break;
+ case SPEED_100 + DUPLEX_HALF:
+ mac->forced_speed_duplex = ADVERTISE_100_HALF;
+ break;
+ case SPEED_100 + DUPLEX_FULL:
+ mac->forced_speed_duplex = ADVERTISE_100_FULL;
+ break;
+ case SPEED_1000 + DUPLEX_FULL:
+ mac->autoneg = 1;
+ adapter->hw.phy.autoneg_advertised = ADVERTISE_1000_FULL;
+ break;
+ case SPEED_1000 + DUPLEX_HALF: /* not supported */
+ default:
+ goto err_inval;
+ }
+
+ /* clear MDI, MDI(-X) override is only allowed when autoneg enabled */
+ adapter->hw.phy.mdix = AUTO_ALL_MODES;
+
+ return 0;
+
+err_inval:
+ dev_err(&pdev->dev, "Unsupported Speed/Duplex configuration\n");
+ return -EINVAL;
+}
+
+static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake,
+ bool runtime)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl, rctl, status;
+ u32 wufc = runtime ? E1000_WUFC_LNKC : adapter->wol;
+#ifdef CONFIG_PM
+ int retval = 0;
+#endif
+
+ netif_device_detach(netdev);
+
+ if (netif_running(netdev))
+ __igb_close(netdev, true);
+
+ igb_clear_interrupt_scheme(adapter);
+
+#ifdef CONFIG_PM
+ retval = pci_save_state(pdev);
+ if (retval)
+ return retval;
+#endif
+
+ status = rd32(E1000_STATUS);
+ if (status & E1000_STATUS_LU)
+ wufc &= ~E1000_WUFC_LNKC;
+
+ if (wufc) {
+ igb_setup_rctl(adapter);
+ igb_set_rx_mode(netdev);
+
+ /* turn on all-multi mode if wake on multicast is enabled */
+ if (wufc & E1000_WUFC_MC) {
+ rctl = rd32(E1000_RCTL);
+ rctl |= E1000_RCTL_MPE;
+ wr32(E1000_RCTL, rctl);
+ }
+
+ ctrl = rd32(E1000_CTRL);
+ /* advertise wake from D3Cold */
+ #define E1000_CTRL_ADVD3WUC 0x00100000
+ /* phy power management enable */
+ #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
+ ctrl |= E1000_CTRL_ADVD3WUC;
+ wr32(E1000_CTRL, ctrl);
+
+ /* Allow time for pending master requests to run */
+ igb_disable_pcie_master(hw);
+
+ wr32(E1000_WUC, E1000_WUC_PME_EN);
+ wr32(E1000_WUFC, wufc);
+ } else {
+ wr32(E1000_WUC, 0);
+ wr32(E1000_WUFC, 0);
+ }
+
+ *enable_wake = wufc || adapter->en_mng_pt;
+ if (!*enable_wake)
+ igb_power_down_link(adapter);
+ else
+ igb_power_up_link(adapter);
+
+ /* Release control of h/w to f/w. If f/w is AMT enabled, this
+ * would have already happened in close and is redundant.
+ */
+ igb_release_hw_control(adapter);
+
+ pci_disable_device(pdev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
+static int igb_suspend(struct device *dev)
+{
+ int retval;
+ bool wake;
+ struct pci_dev *pdev = to_pci_dev(dev);
+
+ retval = __igb_shutdown(pdev, &wake, 0);
+ if (retval)
+ return retval;
+
+ if (wake) {
+ pci_prepare_to_sleep(pdev);
+ } else {
+ pci_wake_from_d3(pdev, false);
+ pci_set_power_state(pdev, PCI_D3hot);
+ }
+
+ return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static int igb_resume(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 err;
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ pci_save_state(pdev);
+
+ if (!pci_device_is_present(pdev))
+ return -ENODEV;
+ err = pci_enable_device_mem(pdev);
+ if (err) {
+ dev_err(&pdev->dev,
+ "igb: Cannot enable PCI device from suspend\n");
+ return err;
+ }
+ pci_set_master(pdev);
+
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+ pci_enable_wake(pdev, PCI_D3cold, 0);
+
+ if (igb_init_interrupt_scheme(adapter, true)) {
+ dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
+ return -ENOMEM;
+ }
+
+ igb_reset(adapter);
+
+ /* let the f/w know that the h/w is now under the control of the
+ * driver.
+ */
+ igb_get_hw_control(adapter);
+
+ wr32(E1000_WUS, ~0);
+
+ if (netdev->flags & IFF_UP) {
+ rtnl_lock();
+ err = __igb_open(netdev, true);
+ rtnl_unlock();
+ if (err)
+ return err;
+ }
+
+ netif_device_attach(netdev);
+ return 0;
+}
+
+static int igb_runtime_idle(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ if (!igb_has_link(adapter))
+ pm_schedule_suspend(dev, MSEC_PER_SEC * 5);
+
+ return -EBUSY;
+}
+
+static int igb_runtime_suspend(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ int retval;
+ bool wake;
+
+ retval = __igb_shutdown(pdev, &wake, 1);
+ if (retval)
+ return retval;
+
+ if (wake) {
+ pci_prepare_to_sleep(pdev);
+ } else {
+ pci_wake_from_d3(pdev, false);
+ pci_set_power_state(pdev, PCI_D3hot);
+ }
+
+ return 0;
+}
+
+static int igb_runtime_resume(struct device *dev)
+{
+ return igb_resume(dev);
+}
+#endif /* CONFIG_PM */
+
+static void igb_shutdown(struct pci_dev *pdev)
+{
+ bool wake;
+
+ __igb_shutdown(pdev, &wake, 0);
+
+ if (system_state == SYSTEM_POWER_OFF) {
+ pci_wake_from_d3(pdev, wake);
+ pci_set_power_state(pdev, PCI_D3hot);
+ }
+}
+
+#ifdef CONFIG_PCI_IOV
+static int igb_sriov_reinit(struct pci_dev *dev)
+{
+ struct net_device *netdev = pci_get_drvdata(dev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct pci_dev *pdev = adapter->pdev;
+
+ rtnl_lock();
+
+ if (netif_running(netdev))
+ igb_close(netdev);
+ else
+ igb_reset(adapter);
+
+ igb_clear_interrupt_scheme(adapter);
+
+ igb_init_queue_configuration(adapter);
+
+ if (igb_init_interrupt_scheme(adapter, true)) {
+ dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
+ return -ENOMEM;
+ }
+
+ if (netif_running(netdev))
+ igb_open(netdev);
+
+ rtnl_unlock();
+
+ return 0;
+}
+
+static int igb_pci_disable_sriov(struct pci_dev *dev)
+{
+ int err = igb_disable_sriov(dev);
+
+ if (!err)
+ err = igb_sriov_reinit(dev);
+
+ return err;
+}
+
+static int igb_pci_enable_sriov(struct pci_dev *dev, int num_vfs)
+{
+ int err = igb_enable_sriov(dev, num_vfs);
+
+ if (err)
+ goto out;
+
+ err = igb_sriov_reinit(dev);
+ if (!err)
+ return num_vfs;
+
+out:
+ return err;
+}
+
+#endif
+static int igb_pci_sriov_configure(struct pci_dev *dev, int num_vfs)
+{
+#ifdef CONFIG_PCI_IOV
+ if (num_vfs == 0)
+ return igb_pci_disable_sriov(dev);
+ else
+ return igb_pci_enable_sriov(dev, num_vfs);
+#endif
+ return 0;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/* Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+static void igb_netpoll(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct igb_q_vector *q_vector;
+ int i;
+
+ for (i = 0; i < adapter->num_q_vectors; i++) {
+ q_vector = adapter->q_vector[i];
+ if (adapter->flags & IGB_FLAG_HAS_MSIX)
+ wr32(E1000_EIMC, q_vector->eims_value);
+ else
+ igb_irq_disable(adapter);
+ napi_schedule(&q_vector->napi);
+ }
+}
+#endif /* CONFIG_NET_POLL_CONTROLLER */
+
+/**
+ * igb_io_error_detected - called when PCI error is detected
+ * @pdev: Pointer to PCI device
+ * @state: The current pci connection state
+ *
+ * This function is called after a PCI bus error affecting
+ * this device has been detected.
+ **/
+static pci_ers_result_t igb_io_error_detected(struct pci_dev *pdev,
+ pci_channel_state_t state)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ netif_device_detach(netdev);
+
+ if (state == pci_channel_io_perm_failure)
+ return PCI_ERS_RESULT_DISCONNECT;
+
+ if (netif_running(netdev))
+ igb_down(adapter);
+ pci_disable_device(pdev);
+
+ /* Request a slot slot reset. */
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * igb_io_slot_reset - called after the pci bus has been reset.
+ * @pdev: Pointer to PCI device
+ *
+ * Restart the card from scratch, as if from a cold-boot. Implementation
+ * resembles the first-half of the igb_resume routine.
+ **/
+static pci_ers_result_t igb_io_slot_reset(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ pci_ers_result_t result;
+ int err;
+
+ if (pci_enable_device_mem(pdev)) {
+ dev_err(&pdev->dev,
+ "Cannot re-enable PCI device after reset.\n");
+ result = PCI_ERS_RESULT_DISCONNECT;
+ } else {
+ pci_set_master(pdev);
+ pci_restore_state(pdev);
+ pci_save_state(pdev);
+
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+ pci_enable_wake(pdev, PCI_D3cold, 0);
+
+ igb_reset(adapter);
+ wr32(E1000_WUS, ~0);
+ result = PCI_ERS_RESULT_RECOVERED;
+ }
+
+ err = pci_cleanup_aer_uncorrect_error_status(pdev);
+ if (err) {
+ dev_err(&pdev->dev,
+ "pci_cleanup_aer_uncorrect_error_status failed 0x%0x\n",
+ err);
+ /* non-fatal, continue */
+ }
+
+ return result;
+}
+
+/**
+ * igb_io_resume - called when traffic can start flowing again.
+ * @pdev: Pointer to PCI device
+ *
+ * This callback is called when the error recovery driver tells us that
+ * its OK to resume normal operation. Implementation resembles the
+ * second-half of the igb_resume routine.
+ */
+static void igb_io_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ if (netif_running(netdev)) {
+ if (igb_up(adapter)) {
+ dev_err(&pdev->dev, "igb_up failed after reset\n");
+ return;
+ }
+ }
+
+ netif_device_attach(netdev);
+
+ /* let the f/w know that the h/w is now under the control of the
+ * driver.
+ */
+ igb_get_hw_control(adapter);
+}
+
+static void igb_rar_set_qsel(struct igb_adapter *adapter, u8 *addr, u32 index,
+ u8 qsel)
+{
+ u32 rar_low, rar_high;
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* HW expects these in little endian so we reverse the byte order
+ * from network order (big endian) to little endian
+ */
+ rar_low = ((u32) addr[0] | ((u32) addr[1] << 8) |
+ ((u32) addr[2] << 16) | ((u32) addr[3] << 24));
+ rar_high = ((u32) addr[4] | ((u32) addr[5] << 8));
+
+ /* Indicate to hardware the Address is Valid. */
+ rar_high |= E1000_RAH_AV;
+
+ if (hw->mac.type == e1000_82575)
+ rar_high |= E1000_RAH_POOL_1 * qsel;
+ else
+ rar_high |= E1000_RAH_POOL_1 << qsel;
+
+ wr32(E1000_RAL(index), rar_low);
+ wrfl();
+ wr32(E1000_RAH(index), rar_high);
+ wrfl();
+}
+
+static int igb_set_vf_mac(struct igb_adapter *adapter,
+ int vf, unsigned char *mac_addr)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ /* VF MAC addresses start at end of receive addresses and moves
+ * towards the first, as a result a collision should not be possible
+ */
+ int rar_entry = hw->mac.rar_entry_count - (vf + 1);
+
+ memcpy(adapter->vf_data[vf].vf_mac_addresses, mac_addr, ETH_ALEN);
+
+ igb_rar_set_qsel(adapter, mac_addr, rar_entry, vf);
+
+ return 0;
+}
+
+static int igb_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ if (!is_valid_ether_addr(mac) || (vf >= adapter->vfs_allocated_count))
+ return -EINVAL;
+ adapter->vf_data[vf].flags |= IGB_VF_FLAG_PF_SET_MAC;
+ dev_info(&adapter->pdev->dev, "setting MAC %pM on VF %d\n", mac, vf);
+ dev_info(&adapter->pdev->dev,
+ "Reload the VF driver to make this change effective.");
+ if (test_bit(__IGB_DOWN, &adapter->state)) {
+ dev_warn(&adapter->pdev->dev,
+ "The VF MAC address has been set, but the PF device is not up.\n");
+ dev_warn(&adapter->pdev->dev,
+ "Bring the PF device up before attempting to use the VF device.\n");
+ }
+ return igb_set_vf_mac(adapter, vf, mac);
+}
+
+static int igb_link_mbps(int internal_link_speed)
+{
+ switch (internal_link_speed) {
+ case SPEED_100:
+ return 100;
+ case SPEED_1000:
+ return 1000;
+ default:
+ return 0;
+ }
+}
+
+static void igb_set_vf_rate_limit(struct e1000_hw *hw, int vf, int tx_rate,
+ int link_speed)
+{
+ int rf_dec, rf_int;
+ u32 bcnrc_val;
+
+ if (tx_rate != 0) {
+ /* Calculate the rate factor values to set */
+ rf_int = link_speed / tx_rate;
+ rf_dec = (link_speed - (rf_int * tx_rate));
+ rf_dec = (rf_dec * (1 << E1000_RTTBCNRC_RF_INT_SHIFT)) /
+ tx_rate;
+
+ bcnrc_val = E1000_RTTBCNRC_RS_ENA;
+ bcnrc_val |= ((rf_int << E1000_RTTBCNRC_RF_INT_SHIFT) &
+ E1000_RTTBCNRC_RF_INT_MASK);
+ bcnrc_val |= (rf_dec & E1000_RTTBCNRC_RF_DEC_MASK);
+ } else {
+ bcnrc_val = 0;
+ }
+
+ wr32(E1000_RTTDQSEL, vf); /* vf X uses queue X */
+ /* Set global transmit compensation time to the MMW_SIZE in RTTBCNRM
+ * register. MMW_SIZE=0x014 if 9728-byte jumbo is supported.
+ */
+ wr32(E1000_RTTBCNRM, 0x14);
+ wr32(E1000_RTTBCNRC, bcnrc_val);
+}
+
+static void igb_check_vf_rate_limit(struct igb_adapter *adapter)
+{
+ int actual_link_speed, i;
+ bool reset_rate = false;
+
+ /* VF TX rate limit was not set or not supported */
+ if ((adapter->vf_rate_link_speed == 0) ||
+ (adapter->hw.mac.type != e1000_82576))
+ return;
+
+ actual_link_speed = igb_link_mbps(adapter->link_speed);
+ if (actual_link_speed != adapter->vf_rate_link_speed) {
+ reset_rate = true;
+ adapter->vf_rate_link_speed = 0;
+ dev_info(&adapter->pdev->dev,
+ "Link speed has been changed. VF Transmit rate is disabled\n");
+ }
+
+ for (i = 0; i < adapter->vfs_allocated_count; i++) {
+ if (reset_rate)
+ adapter->vf_data[i].tx_rate = 0;
+
+ igb_set_vf_rate_limit(&adapter->hw, i,
+ adapter->vf_data[i].tx_rate,
+ actual_link_speed);
+ }
+}
+
+static int igb_ndo_set_vf_bw(struct net_device *netdev, int vf,
+ int min_tx_rate, int max_tx_rate)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int actual_link_speed;
+
+ if (hw->mac.type != e1000_82576)
+ return -EOPNOTSUPP;
+
+ if (min_tx_rate)
+ return -EINVAL;
+
+ actual_link_speed = igb_link_mbps(adapter->link_speed);
+ if ((vf >= adapter->vfs_allocated_count) ||
+ (!(rd32(E1000_STATUS) & E1000_STATUS_LU)) ||
+ (max_tx_rate < 0) ||
+ (max_tx_rate > actual_link_speed))
+ return -EINVAL;
+
+ adapter->vf_rate_link_speed = actual_link_speed;
+ adapter->vf_data[vf].tx_rate = (u16)max_tx_rate;
+ igb_set_vf_rate_limit(hw, vf, max_tx_rate, actual_link_speed);
+
+ return 0;
+}
+
+static int igb_ndo_set_vf_spoofchk(struct net_device *netdev, int vf,
+ bool setting)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 reg_val, reg_offset;
+
+ if (!adapter->vfs_allocated_count)
+ return -EOPNOTSUPP;
+
+ if (vf >= adapter->vfs_allocated_count)
+ return -EINVAL;
+
+ reg_offset = (hw->mac.type == e1000_82576) ? E1000_DTXSWC : E1000_TXSWC;
+ reg_val = rd32(reg_offset);
+ if (setting)
+ reg_val |= ((1 << vf) |
+ (1 << (vf + E1000_DTXSWC_VLAN_SPOOF_SHIFT)));
+ else
+ reg_val &= ~((1 << vf) |
+ (1 << (vf + E1000_DTXSWC_VLAN_SPOOF_SHIFT)));
+ wr32(reg_offset, reg_val);
+
+ adapter->vf_data[vf].spoofchk_enabled = setting;
+ return 0;
+}
+
+static int igb_ndo_get_vf_config(struct net_device *netdev,
+ int vf, struct ifla_vf_info *ivi)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ if (vf >= adapter->vfs_allocated_count)
+ return -EINVAL;
+ ivi->vf = vf;
+ memcpy(&ivi->mac, adapter->vf_data[vf].vf_mac_addresses, ETH_ALEN);
+ ivi->max_tx_rate = adapter->vf_data[vf].tx_rate;
+ ivi->min_tx_rate = 0;
+ ivi->vlan = adapter->vf_data[vf].pf_vlan;
+ ivi->qos = adapter->vf_data[vf].pf_qos;
+ ivi->spoofchk = adapter->vf_data[vf].spoofchk_enabled;
+ return 0;
+}
+
+static void igb_vmm_control(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 reg;
+
+ switch (hw->mac.type) {
+ case e1000_82575:
+ case e1000_i210:
+ case e1000_i211:
+ case e1000_i354:
+ default:
+ /* replication is not supported for 82575 */
+ return;
+ case e1000_82576:
+ /* notify HW that the MAC is adding vlan tags */
+ reg = rd32(E1000_DTXCTL);
+ reg |= E1000_DTXCTL_VLAN_ADDED;
+ wr32(E1000_DTXCTL, reg);
+ /* Fall through */
+ case e1000_82580:
+ /* enable replication vlan tag stripping */
+ reg = rd32(E1000_RPLOLR);
+ reg |= E1000_RPLOLR_STRVLAN;
+ wr32(E1000_RPLOLR, reg);
+ /* Fall through */
+ case e1000_i350:
+ /* none of the above registers are supported by i350 */
+ break;
+ }
+
+ if (adapter->vfs_allocated_count) {
+ igb_vmdq_set_loopback_pf(hw, true);
+ igb_vmdq_set_replication_pf(hw, true);
+ igb_vmdq_set_anti_spoofing_pf(hw, true,
+ adapter->vfs_allocated_count);
+ } else {
+ igb_vmdq_set_loopback_pf(hw, false);
+ igb_vmdq_set_replication_pf(hw, false);
+ }
+}
+
+static void igb_init_dmac(struct igb_adapter *adapter, u32 pba)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 dmac_thr;
+ u16 hwm;
+
+ if (hw->mac.type > e1000_82580) {
+ if (adapter->flags & IGB_FLAG_DMAC) {
+ u32 reg;
+
+ /* force threshold to 0. */
+ wr32(E1000_DMCTXTH, 0);
+
+ /* DMA Coalescing high water mark needs to be greater
+ * than the Rx threshold. Set hwm to PBA - max frame
+ * size in 16B units, capping it at PBA - 6KB.
+ */
+ hwm = 64 * pba - adapter->max_frame_size / 16;
+ if (hwm < 64 * (pba - 6))
+ hwm = 64 * (pba - 6);
+ reg = rd32(E1000_FCRTC);
+ reg &= ~E1000_FCRTC_RTH_COAL_MASK;
+ reg |= ((hwm << E1000_FCRTC_RTH_COAL_SHIFT)
+ & E1000_FCRTC_RTH_COAL_MASK);
+ wr32(E1000_FCRTC, reg);
+
+ /* Set the DMA Coalescing Rx threshold to PBA - 2 * max
+ * frame size, capping it at PBA - 10KB.
+ */
+ dmac_thr = pba - adapter->max_frame_size / 512;
+ if (dmac_thr < pba - 10)
+ dmac_thr = pba - 10;
+ reg = rd32(E1000_DMACR);
+ reg &= ~E1000_DMACR_DMACTHR_MASK;
+ reg |= ((dmac_thr << E1000_DMACR_DMACTHR_SHIFT)
+ & E1000_DMACR_DMACTHR_MASK);
+
+ /* transition to L0x or L1 if available..*/
+ reg |= (E1000_DMACR_DMAC_EN | E1000_DMACR_DMAC_LX_MASK);
+
+ /* watchdog timer= +-1000 usec in 32usec intervals */
+ reg |= (1000 >> 5);
+
+ /* Disable BMC-to-OS Watchdog Enable */
+ if (hw->mac.type != e1000_i354)
+ reg &= ~E1000_DMACR_DC_BMC2OSW_EN;
+
+ wr32(E1000_DMACR, reg);
+
+ /* no lower threshold to disable
+ * coalescing(smart fifb)-UTRESH=0
+ */
+ wr32(E1000_DMCRTRH, 0);
+
+ reg = (IGB_DMCTLX_DCFLUSH_DIS | 0x4);
+
+ wr32(E1000_DMCTLX, reg);
+
+ /* free space in tx packet buffer to wake from
+ * DMA coal
+ */
+ wr32(E1000_DMCTXTH, (IGB_MIN_TXPBSIZE -
+ (IGB_TX_BUF_4096 + adapter->max_frame_size)) >> 6);
+
+ /* make low power state decision controlled
+ * by DMA coal
+ */
+ reg = rd32(E1000_PCIEMISC);
+ reg &= ~E1000_PCIEMISC_LX_DECISION;
+ wr32(E1000_PCIEMISC, reg);
+ } /* endif adapter->dmac is not disabled */
+ } else if (hw->mac.type == e1000_82580) {
+ u32 reg = rd32(E1000_PCIEMISC);
+
+ wr32(E1000_PCIEMISC, reg & ~E1000_PCIEMISC_LX_DECISION);
+ wr32(E1000_DMACR, 0);
+ }
+}
+
+/**
+ * igb_read_i2c_byte - Reads 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to read
+ * @dev_addr: device address
+ * @data: value read
+ *
+ * Performs byte read operation over I2C interface at
+ * a specified device address.
+ **/
+s32 igb_read_i2c_byte(struct e1000_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 *data)
+{
+ struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw);
+ struct i2c_client *this_client = adapter->i2c_client;
+ s32 status;
+ u16 swfw_mask = 0;
+
+ if (!this_client)
+ return E1000_ERR_I2C;
+
+ swfw_mask = E1000_SWFW_PHY0_SM;
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask))
+ return E1000_ERR_SWFW_SYNC;
+
+ status = i2c_smbus_read_byte_data(this_client, byte_offset);
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+
+ if (status < 0)
+ return E1000_ERR_I2C;
+ else {
+ *data = status;
+ return 0;
+ }
+}
+
+/**
+ * igb_write_i2c_byte - Writes 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to write
+ * @dev_addr: device address
+ * @data: value to write
+ *
+ * Performs byte write operation over I2C interface at
+ * a specified device address.
+ **/
+s32 igb_write_i2c_byte(struct e1000_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 data)
+{
+ struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw);
+ struct i2c_client *this_client = adapter->i2c_client;
+ s32 status;
+ u16 swfw_mask = E1000_SWFW_PHY0_SM;
+
+ if (!this_client)
+ return E1000_ERR_I2C;
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask))
+ return E1000_ERR_SWFW_SYNC;
+ status = i2c_smbus_write_byte_data(this_client, byte_offset, data);
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+
+ if (status)
+ return E1000_ERR_I2C;
+ else
+ return 0;
+
+}
+
+int igb_reinit_queues(struct igb_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ int err = 0;
+
+ if (netif_running(netdev))
+ igb_close(netdev);
+
+ igb_reset_interrupt_capability(adapter);
+
+ if (igb_init_interrupt_scheme(adapter, true)) {
+ dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
+ return -ENOMEM;
+ }
+
+ if (netif_running(netdev))
+ err = igb_open(netdev);
+
+ return err;
+}
+/* igb_main.c */
Code Review / kvmfornfv.git / blobdiff