--- /dev/null
+/*******************************************************************************
+ *
+ * Intel Ethernet Controller XL710 Family Linux Driver
+ * Copyright(c) 2013 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
+
+#include "i40e.h"
+#include <linux/ptp_classify.h>
+
+/* The XL710 timesync is very much like Intel's 82599 design when it comes to
+ * the fundamental clock design. However, the clock operations are much simpler
+ * in the XL710 because the device supports a full 64 bits of nanoseconds.
+ * Because the field is so wide, we can forgo the cycle counter and just
+ * operate with the nanosecond field directly without fear of overflow.
+ *
+ * Much like the 82599, the update period is dependent upon the link speed:
+ * At 40Gb link or no link, the period is 1.6ns.
+ * At 10Gb link, the period is multiplied by 2. (3.2ns)
+ * At 1Gb link, the period is multiplied by 20. (32ns)
+ * 1588 functionality is not supported at 100Mbps.
+ */
+#define I40E_PTP_40GB_INCVAL 0x0199999999ULL
+#define I40E_PTP_10GB_INCVAL 0x0333333333ULL
+#define I40E_PTP_1GB_INCVAL 0x2000000000ULL
+
+#define I40E_PRTTSYN_CTL1_TSYNTYPE_V1 (0x1 << \
+ I40E_PRTTSYN_CTL1_TSYNTYPE_SHIFT)
+#define I40E_PRTTSYN_CTL1_TSYNTYPE_V2 (0x2 << \
+ I40E_PRTTSYN_CTL1_TSYNTYPE_SHIFT)
+
+/**
+ * i40e_ptp_read - Read the PHC time from the device
+ * @pf: Board private structure
+ * @ts: timespec structure to hold the current time value
+ *
+ * This function reads the PRTTSYN_TIME registers and stores them in a
+ * timespec. However, since the registers are 64 bits of nanoseconds, we must
+ * convert the result to a timespec before we can return.
+ **/
+static void i40e_ptp_read(struct i40e_pf *pf, struct timespec64 *ts)
+{
+ struct i40e_hw *hw = &pf->hw;
+ u32 hi, lo;
+ u64 ns;
+
+ /* The timer latches on the lowest register read. */
+ lo = rd32(hw, I40E_PRTTSYN_TIME_L);
+ hi = rd32(hw, I40E_PRTTSYN_TIME_H);
+
+ ns = (((u64)hi) << 32) | lo;
+
+ *ts = ns_to_timespec64(ns);
+}
+
+/**
+ * i40e_ptp_write - Write the PHC time to the device
+ * @pf: Board private structure
+ * @ts: timespec structure that holds the new time value
+ *
+ * This function writes the PRTTSYN_TIME registers with the user value. Since
+ * we receive a timespec from the stack, we must convert that timespec into
+ * nanoseconds before programming the registers.
+ **/
+static void i40e_ptp_write(struct i40e_pf *pf, const struct timespec64 *ts)
+{
+ struct i40e_hw *hw = &pf->hw;
+ u64 ns = timespec64_to_ns(ts);
+
+ /* The timer will not update until the high register is written, so
+ * write the low register first.
+ */
+ wr32(hw, I40E_PRTTSYN_TIME_L, ns & 0xFFFFFFFF);
+ wr32(hw, I40E_PRTTSYN_TIME_H, ns >> 32);
+}
+
+/**
+ * i40e_ptp_convert_to_hwtstamp - Convert device clock to system time
+ * @hwtstamps: Timestamp structure to update
+ * @timestamp: Timestamp from the hardware
+ *
+ * We need to convert the NIC clock value into a hwtstamp which can be used by
+ * the upper level timestamping functions. Since the timestamp is simply a 64-
+ * bit nanosecond value, we can call ns_to_ktime directly to handle this.
+ **/
+static void i40e_ptp_convert_to_hwtstamp(struct skb_shared_hwtstamps *hwtstamps,
+ u64 timestamp)
+{
+ memset(hwtstamps, 0, sizeof(*hwtstamps));
+
+ hwtstamps->hwtstamp = ns_to_ktime(timestamp);
+}
+
+/**
+ * i40e_ptp_adjfreq - Adjust the PHC frequency
+ * @ptp: The PTP clock structure
+ * @ppb: Parts per billion adjustment from the base
+ *
+ * Adjust the frequency of the PHC by the indicated parts per billion from the
+ * base frequency.
+ **/
+static int i40e_ptp_adjfreq(struct ptp_clock_info *ptp, s32 ppb)
+{
+ struct i40e_pf *pf = container_of(ptp, struct i40e_pf, ptp_caps);
+ struct i40e_hw *hw = &pf->hw;
+ u64 adj, freq, diff;
+ int neg_adj = 0;
+
+ if (ppb < 0) {
+ neg_adj = 1;
+ ppb = -ppb;
+ }
+
+ smp_mb(); /* Force any pending update before accessing. */
+ adj = ACCESS_ONCE(pf->ptp_base_adj);
+
+ freq = adj;
+ freq *= ppb;
+ diff = div_u64(freq, 1000000000ULL);
+
+ if (neg_adj)
+ adj -= diff;
+ else
+ adj += diff;
+
+ wr32(hw, I40E_PRTTSYN_INC_L, adj & 0xFFFFFFFF);
+ wr32(hw, I40E_PRTTSYN_INC_H, adj >> 32);
+
+ return 0;
+}
+
+/**
+ * i40e_ptp_adjtime - Adjust the PHC time
+ * @ptp: The PTP clock structure
+ * @delta: Offset in nanoseconds to adjust the PHC time by
+ *
+ * Adjust the frequency of the PHC by the indicated parts per billion from the
+ * base frequency.
+ **/
+static int i40e_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta)
+{
+ struct i40e_pf *pf = container_of(ptp, struct i40e_pf, ptp_caps);
+ struct timespec64 now, then = ns_to_timespec64(delta);
+ unsigned long flags;
+
+ spin_lock_irqsave(&pf->tmreg_lock, flags);
+
+ i40e_ptp_read(pf, &now);
+ now = timespec64_add(now, then);
+ i40e_ptp_write(pf, (const struct timespec64 *)&now);
+
+ spin_unlock_irqrestore(&pf->tmreg_lock, flags);
+
+ return 0;
+}
+
+/**
+ * i40e_ptp_gettime - Get the time of the PHC
+ * @ptp: The PTP clock structure
+ * @ts: timespec structure to hold the current time value
+ *
+ * Read the device clock and return the correct value on ns, after converting it
+ * into a timespec struct.
+ **/
+static int i40e_ptp_gettime(struct ptp_clock_info *ptp, struct timespec64 *ts)
+{
+ struct i40e_pf *pf = container_of(ptp, struct i40e_pf, ptp_caps);
+ unsigned long flags;
+
+ spin_lock_irqsave(&pf->tmreg_lock, flags);
+ i40e_ptp_read(pf, ts);
+ spin_unlock_irqrestore(&pf->tmreg_lock, flags);
+
+ return 0;
+}
+
+/**
+ * i40e_ptp_settime - Set the time of the PHC
+ * @ptp: The PTP clock structure
+ * @ts: timespec structure that holds the new time value
+ *
+ * Set the device clock to the user input value. The conversion from timespec
+ * to ns happens in the write function.
+ **/
+static int i40e_ptp_settime(struct ptp_clock_info *ptp,
+ const struct timespec64 *ts)
+{
+ struct i40e_pf *pf = container_of(ptp, struct i40e_pf, ptp_caps);
+ unsigned long flags;
+
+ spin_lock_irqsave(&pf->tmreg_lock, flags);
+ i40e_ptp_write(pf, ts);
+ spin_unlock_irqrestore(&pf->tmreg_lock, flags);
+
+ return 0;
+}
+
+/**
+ * i40e_ptp_feature_enable - Enable/disable ancillary features of the PHC subsystem
+ * @ptp: The PTP clock structure
+ * @rq: The requested feature to change
+ * @on: Enable/disable flag
+ *
+ * The XL710 does not support any of the ancillary features of the PHC
+ * subsystem, so this function may just return.
+ **/
+static int i40e_ptp_feature_enable(struct ptp_clock_info *ptp,
+ struct ptp_clock_request *rq, int on)
+{
+ return -EOPNOTSUPP;
+}
+
+/**
+ * i40e_ptp_rx_hang - Detect error case when Rx timestamp registers are hung
+ * @vsi: The VSI with the rings relevant to 1588
+ *
+ * This watchdog task is scheduled to detect error case where hardware has
+ * dropped an Rx packet that was timestamped when the ring is full. The
+ * particular error is rare but leaves the device in a state unable to timestamp
+ * any future packets.
+ **/
+void i40e_ptp_rx_hang(struct i40e_vsi *vsi)
+{
+ struct i40e_pf *pf = vsi->back;
+ struct i40e_hw *hw = &pf->hw;
+ struct i40e_ring *rx_ring;
+ unsigned long rx_event;
+ u32 prttsyn_stat;
+ int n;
+
+ /* Since we cannot turn off the Rx timestamp logic if the device is
+ * configured for Tx timestamping, we check if Rx timestamping is
+ * configured. We don't want to spuriously warn about Rx timestamp
+ * hangs if we don't care about the timestamps.
+ */
+ if (!(pf->flags & I40E_FLAG_PTP) || !pf->ptp_rx)
+ return;
+
+ prttsyn_stat = rd32(hw, I40E_PRTTSYN_STAT_1);
+
+ /* Unless all four receive timestamp registers are latched, we are not
+ * concerned about a possible PTP Rx hang, so just update the timeout
+ * counter and exit.
+ */
+ if (!(prttsyn_stat & ((I40E_PRTTSYN_STAT_1_RXT0_MASK <<
+ I40E_PRTTSYN_STAT_1_RXT0_SHIFT) |
+ (I40E_PRTTSYN_STAT_1_RXT1_MASK <<
+ I40E_PRTTSYN_STAT_1_RXT1_SHIFT) |
+ (I40E_PRTTSYN_STAT_1_RXT2_MASK <<
+ I40E_PRTTSYN_STAT_1_RXT2_SHIFT) |
+ (I40E_PRTTSYN_STAT_1_RXT3_MASK <<
+ I40E_PRTTSYN_STAT_1_RXT3_SHIFT)))) {
+ pf->last_rx_ptp_check = jiffies;
+ return;
+ }
+
+ /* Determine the most recent watchdog or rx_timestamp event. */
+ rx_event = pf->last_rx_ptp_check;
+ for (n = 0; n < vsi->num_queue_pairs; n++) {
+ rx_ring = vsi->rx_rings[n];
+ if (time_after(rx_ring->last_rx_timestamp, rx_event))
+ rx_event = rx_ring->last_rx_timestamp;
+ }
+
+ /* Only need to read the high RXSTMP register to clear the lock */
+ if (time_is_before_jiffies(rx_event + 5 * HZ)) {
+ rd32(hw, I40E_PRTTSYN_RXTIME_H(0));
+ rd32(hw, I40E_PRTTSYN_RXTIME_H(1));
+ rd32(hw, I40E_PRTTSYN_RXTIME_H(2));
+ rd32(hw, I40E_PRTTSYN_RXTIME_H(3));
+ pf->last_rx_ptp_check = jiffies;
+ pf->rx_hwtstamp_cleared++;
+ dev_warn(&vsi->back->pdev->dev,
+ "%s: clearing Rx timestamp hang\n",
+ __func__);
+ }
+}
+
+/**
+ * i40e_ptp_tx_hwtstamp - Utility function which returns the Tx timestamp
+ * @pf: Board private structure
+ *
+ * Read the value of the Tx timestamp from the registers, convert it into a
+ * value consumable by the stack, and store that result into the shhwtstamps
+ * struct before returning it up the stack.
+ **/
+void i40e_ptp_tx_hwtstamp(struct i40e_pf *pf)
+{
+ struct skb_shared_hwtstamps shhwtstamps;
+ struct i40e_hw *hw = &pf->hw;
+ u32 hi, lo;
+ u64 ns;
+
+ if (!(pf->flags & I40E_FLAG_PTP) || !pf->ptp_tx)
+ return;
+
+ /* don't attempt to timestamp if we don't have an skb */
+ if (!pf->ptp_tx_skb)
+ return;
+
+ lo = rd32(hw, I40E_PRTTSYN_TXTIME_L);
+ hi = rd32(hw, I40E_PRTTSYN_TXTIME_H);
+
+ ns = (((u64)hi) << 32) | lo;
+
+ i40e_ptp_convert_to_hwtstamp(&shhwtstamps, ns);
+ skb_tstamp_tx(pf->ptp_tx_skb, &shhwtstamps);
+ dev_kfree_skb_any(pf->ptp_tx_skb);
+ pf->ptp_tx_skb = NULL;
+ clear_bit_unlock(__I40E_PTP_TX_IN_PROGRESS, &pf->state);
+}
+
+/**
+ * i40e_ptp_rx_hwtstamp - Utility function which checks for an Rx timestamp
+ * @pf: Board private structure
+ * @skb: Particular skb to send timestamp with
+ * @index: Index into the receive timestamp registers for the timestamp
+ *
+ * The XL710 receives a notification in the receive descriptor with an offset
+ * into the set of RXTIME registers where the timestamp is for that skb. This
+ * function goes and fetches the receive timestamp from that offset, if a valid
+ * one exists. The RXTIME registers are in ns, so we must convert the result
+ * first.
+ **/
+void i40e_ptp_rx_hwtstamp(struct i40e_pf *pf, struct sk_buff *skb, u8 index)
+{
+ u32 prttsyn_stat, hi, lo;
+ struct i40e_hw *hw;
+ u64 ns;
+
+ /* Since we cannot turn off the Rx timestamp logic if the device is
+ * doing Tx timestamping, check if Rx timestamping is configured.
+ */
+ if (!(pf->flags & I40E_FLAG_PTP) || !pf->ptp_rx)
+ return;
+
+ hw = &pf->hw;
+
+ prttsyn_stat = rd32(hw, I40E_PRTTSYN_STAT_1);
+
+ if (!(prttsyn_stat & (1 << index)))
+ return;
+
+ lo = rd32(hw, I40E_PRTTSYN_RXTIME_L(index));
+ hi = rd32(hw, I40E_PRTTSYN_RXTIME_H(index));
+
+ ns = (((u64)hi) << 32) | lo;
+
+ i40e_ptp_convert_to_hwtstamp(skb_hwtstamps(skb), ns);
+}
+
+/**
+ * i40e_ptp_set_increment - Utility function to update clock increment rate
+ * @pf: Board private structure
+ *
+ * During a link change, the DMA frequency that drives the 1588 logic will
+ * change. In order to keep the PRTTSYN_TIME registers in units of nanoseconds,
+ * we must update the increment value per clock tick.
+ **/
+void i40e_ptp_set_increment(struct i40e_pf *pf)
+{
+ struct i40e_link_status *hw_link_info;
+ struct i40e_hw *hw = &pf->hw;
+ u64 incval;
+
+ hw_link_info = &hw->phy.link_info;
+
+ i40e_aq_get_link_info(&pf->hw, true, NULL, NULL);
+
+ switch (hw_link_info->link_speed) {
+ case I40E_LINK_SPEED_10GB:
+ incval = I40E_PTP_10GB_INCVAL;
+ break;
+ case I40E_LINK_SPEED_1GB:
+ incval = I40E_PTP_1GB_INCVAL;
+ break;
+ case I40E_LINK_SPEED_100MB:
+ {
+ static int warn_once;
+
+ if (!warn_once) {
+ dev_warn(&pf->pdev->dev,
+ "1588 functionality is not supported at 100 Mbps. Stopping the PHC.\n");
+ warn_once++;
+ }
+ incval = 0;
+ break;
+ }
+ case I40E_LINK_SPEED_40GB:
+ default:
+ incval = I40E_PTP_40GB_INCVAL;
+ break;
+ }
+
+ /* Write the new increment value into the increment register. The
+ * hardware will not update the clock until both registers have been
+ * written.
+ */
+ wr32(hw, I40E_PRTTSYN_INC_L, incval & 0xFFFFFFFF);
+ wr32(hw, I40E_PRTTSYN_INC_H, incval >> 32);
+
+ /* Update the base adjustement value. */
+ ACCESS_ONCE(pf->ptp_base_adj) = incval;
+ smp_mb(); /* Force the above update. */
+}
+
+/**
+ * i40e_ptp_get_ts_config - ioctl interface to read the HW timestamping
+ * @pf: Board private structure
+ * @ifreq: ioctl data
+ *
+ * Obtain the current hardware timestamping settigs as requested. To do this,
+ * keep a shadow copy of the timestamp settings rather than attempting to
+ * deconstruct it from the registers.
+ **/
+int i40e_ptp_get_ts_config(struct i40e_pf *pf, struct ifreq *ifr)
+{
+ struct hwtstamp_config *config = &pf->tstamp_config;
+
+ if (!(pf->flags & I40E_FLAG_PTP))
+ return -EOPNOTSUPP;
+
+ return copy_to_user(ifr->ifr_data, config, sizeof(*config)) ?
+ -EFAULT : 0;
+}
+
+/**
+ * i40e_ptp_set_timestamp_mode - setup hardware for requested timestamp mode
+ * @pf: Board private structure
+ * @config: hwtstamp settings requested or saved
+ *
+ * Control hardware registers to enter the specific mode requested by the
+ * user. Also used during reset path to ensure that timestamp settings are
+ * maintained.
+ *
+ * Note: modifies config in place, and may update the requested mode to be
+ * more broad if the specific filter is not directly supported.
+ **/
+static int i40e_ptp_set_timestamp_mode(struct i40e_pf *pf,
+ struct hwtstamp_config *config)
+{
+ struct i40e_hw *hw = &pf->hw;
+ u32 tsyntype, regval;
+
+ /* Reserved for future extensions. */
+ if (config->flags)
+ return -EINVAL;
+
+ switch (config->tx_type) {
+ case HWTSTAMP_TX_OFF:
+ pf->ptp_tx = false;
+ break;
+ case HWTSTAMP_TX_ON:
+ pf->ptp_tx = true;
+ break;
+ default:
+ return -ERANGE;
+ }
+
+ switch (config->rx_filter) {
+ case HWTSTAMP_FILTER_NONE:
+ pf->ptp_rx = false;
+ /* We set the type to V1, but do not enable UDP packet
+ * recognition. In this way, we should be as close to
+ * disabling PTP Rx timestamps as possible since V1 packets
+ * are always UDP, since L2 packets are a V2 feature.
+ */
+ tsyntype = I40E_PRTTSYN_CTL1_TSYNTYPE_V1;
+ break;
+ case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
+ case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
+ case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
+ pf->ptp_rx = true;
+ tsyntype = I40E_PRTTSYN_CTL1_V1MESSTYPE0_MASK |
+ I40E_PRTTSYN_CTL1_TSYNTYPE_V1 |
+ I40E_PRTTSYN_CTL1_UDP_ENA_MASK;
+ config->rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_EVENT;
+ break;
+ case HWTSTAMP_FILTER_PTP_V2_EVENT:
+ case HWTSTAMP_FILTER_PTP_V2_L2_EVENT:
+ case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
+ case HWTSTAMP_FILTER_PTP_V2_SYNC:
+ case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
+ case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
+ case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
+ case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
+ case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
+ pf->ptp_rx = true;
+ tsyntype = I40E_PRTTSYN_CTL1_V2MESSTYPE0_MASK |
+ I40E_PRTTSYN_CTL1_TSYNTYPE_V2 |
+ I40E_PRTTSYN_CTL1_UDP_ENA_MASK;
+ config->rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT;
+ break;
+ case HWTSTAMP_FILTER_ALL:
+ default:
+ return -ERANGE;
+ }
+
+ /* Clear out all 1588-related registers to clear and unlatch them. */
+ rd32(hw, I40E_PRTTSYN_STAT_0);
+ rd32(hw, I40E_PRTTSYN_TXTIME_H);
+ rd32(hw, I40E_PRTTSYN_RXTIME_H(0));
+ rd32(hw, I40E_PRTTSYN_RXTIME_H(1));
+ rd32(hw, I40E_PRTTSYN_RXTIME_H(2));
+ rd32(hw, I40E_PRTTSYN_RXTIME_H(3));
+
+ /* Enable/disable the Tx timestamp interrupt based on user input. */
+ regval = rd32(hw, I40E_PRTTSYN_CTL0);
+ if (pf->ptp_tx)
+ regval |= I40E_PRTTSYN_CTL0_TXTIME_INT_ENA_MASK;
+ else
+ regval &= ~I40E_PRTTSYN_CTL0_TXTIME_INT_ENA_MASK;
+ wr32(hw, I40E_PRTTSYN_CTL0, regval);
+
+ regval = rd32(hw, I40E_PFINT_ICR0_ENA);
+ if (pf->ptp_tx)
+ regval |= I40E_PFINT_ICR0_ENA_TIMESYNC_MASK;
+ else
+ regval &= ~I40E_PFINT_ICR0_ENA_TIMESYNC_MASK;
+ wr32(hw, I40E_PFINT_ICR0_ENA, regval);
+
+ /* Although there is no simple on/off switch for Rx, we "disable" Rx
+ * timestamps by setting to V1 only mode and clear the UDP
+ * recognition. This ought to disable all PTP Rx timestamps as V1
+ * packets are always over UDP. Note that software is configured to
+ * ignore Rx timestamps via the pf->ptp_rx flag.
+ */
+ regval = rd32(hw, I40E_PRTTSYN_CTL1);
+ /* clear everything but the enable bit */
+ regval &= I40E_PRTTSYN_CTL1_TSYNENA_MASK;
+ /* now enable bits for desired Rx timestamps */
+ regval |= tsyntype;
+ wr32(hw, I40E_PRTTSYN_CTL1, regval);
+
+ return 0;
+}
+
+/**
+ * i40e_ptp_set_ts_config - ioctl interface to control the HW timestamping
+ * @pf: Board private structure
+ * @ifreq: ioctl data
+ *
+ * Respond to the user filter requests and make the appropriate hardware
+ * changes here. The XL710 cannot support splitting of the Tx/Rx timestamping
+ * logic, so keep track in software of whether to indicate these timestamps
+ * or not.
+ *
+ * It is permissible to "upgrade" the user request to a broader filter, as long
+ * as the user receives the timestamps they care about and the user is notified
+ * the filter has been broadened.
+ **/
+int i40e_ptp_set_ts_config(struct i40e_pf *pf, struct ifreq *ifr)
+{
+ struct hwtstamp_config config;
+ int err;
+
+ if (!(pf->flags & I40E_FLAG_PTP))
+ return -EOPNOTSUPP;
+
+ if (copy_from_user(&config, ifr->ifr_data, sizeof(config)))
+ return -EFAULT;
+
+ err = i40e_ptp_set_timestamp_mode(pf, &config);
+ if (err)
+ return err;
+
+ /* save these settings for future reference */
+ pf->tstamp_config = config;
+
+ return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ?
+ -EFAULT : 0;
+}
+
+/**
+ * i40e_ptp_create_clock - Create PTP clock device for userspace
+ * @pf: Board private structure
+ *
+ * This function creates a new PTP clock device. It only creates one if we
+ * don't already have one, so it is safe to call. Will return error if it
+ * can't create one, but success if we already have a device. Should be used
+ * by i40e_ptp_init to create clock initially, and prevent global resets from
+ * creating new clock devices.
+ **/
+static long i40e_ptp_create_clock(struct i40e_pf *pf)
+{
+ /* no need to create a clock device if we already have one */
+ if (!IS_ERR_OR_NULL(pf->ptp_clock))
+ return 0;
+
+ strncpy(pf->ptp_caps.name, i40e_driver_name, sizeof(pf->ptp_caps.name));
+ pf->ptp_caps.owner = THIS_MODULE;
+ pf->ptp_caps.max_adj = 999999999;
+ pf->ptp_caps.n_ext_ts = 0;
+ pf->ptp_caps.pps = 0;
+ pf->ptp_caps.adjfreq = i40e_ptp_adjfreq;
+ pf->ptp_caps.adjtime = i40e_ptp_adjtime;
+ pf->ptp_caps.gettime64 = i40e_ptp_gettime;
+ pf->ptp_caps.settime64 = i40e_ptp_settime;
+ pf->ptp_caps.enable = i40e_ptp_feature_enable;
+
+ /* Attempt to register the clock before enabling the hardware. */
+ pf->ptp_clock = ptp_clock_register(&pf->ptp_caps, &pf->pdev->dev);
+ if (IS_ERR(pf->ptp_clock)) {
+ return PTR_ERR(pf->ptp_clock);
+ }
+
+ /* clear the hwtstamp settings here during clock create, instead of
+ * during regular init, so that we can maintain settings across a
+ * reset or suspend.
+ */
+ pf->tstamp_config.rx_filter = HWTSTAMP_FILTER_NONE;
+ pf->tstamp_config.tx_type = HWTSTAMP_TX_OFF;
+
+ return 0;
+}
+
+/**
+ * i40e_ptp_init - Initialize the 1588 support after device probe or reset
+ * @pf: Board private structure
+ *
+ * This function sets device up for 1588 support. The first time it is run, it
+ * will create a PHC clock device. It does not create a clock device if one
+ * already exists. It also reconfigures the device after a reset.
+ **/
+void i40e_ptp_init(struct i40e_pf *pf)
+{
+ struct net_device *netdev = pf->vsi[pf->lan_vsi]->netdev;
+ struct i40e_hw *hw = &pf->hw;
+ u32 pf_id;
+ long err;
+
+ /* Only one PF is assigned to control 1588 logic per port. Do not
+ * enable any support for PFs not assigned via PRTTSYN_CTL0.PF_ID
+ */
+ pf_id = (rd32(hw, I40E_PRTTSYN_CTL0) & I40E_PRTTSYN_CTL0_PF_ID_MASK) >>
+ I40E_PRTTSYN_CTL0_PF_ID_SHIFT;
+ if (hw->pf_id != pf_id) {
+ pf->flags &= ~I40E_FLAG_PTP;
+ dev_info(&pf->pdev->dev, "%s: PTP not supported on %s\n",
+ __func__,
+ netdev->name);
+ return;
+ }
+
+ /* we have to initialize the lock first, since we can't control
+ * when the user will enter the PHC device entry points
+ */
+ spin_lock_init(&pf->tmreg_lock);
+
+ /* ensure we have a clock device */
+ err = i40e_ptp_create_clock(pf);
+ if (err) {
+ pf->ptp_clock = NULL;
+ dev_err(&pf->pdev->dev, "%s: ptp_clock_register failed\n",
+ __func__);
+ } else {
+ struct timespec64 ts;
+ u32 regval;
+
+ dev_info(&pf->pdev->dev, "%s: added PHC on %s\n", __func__,
+ netdev->name);
+ pf->flags |= I40E_FLAG_PTP;
+
+ /* Ensure the clocks are running. */
+ regval = rd32(hw, I40E_PRTTSYN_CTL0);
+ regval |= I40E_PRTTSYN_CTL0_TSYNENA_MASK;
+ wr32(hw, I40E_PRTTSYN_CTL0, regval);
+ regval = rd32(hw, I40E_PRTTSYN_CTL1);
+ regval |= I40E_PRTTSYN_CTL1_TSYNENA_MASK;
+ wr32(hw, I40E_PRTTSYN_CTL1, regval);
+
+ /* Set the increment value per clock tick. */
+ i40e_ptp_set_increment(pf);
+
+ /* reset timestamping mode */
+ i40e_ptp_set_timestamp_mode(pf, &pf->tstamp_config);
+
+ /* Set the clock value. */
+ ts = ktime_to_timespec64(ktime_get_real());
+ i40e_ptp_settime(&pf->ptp_caps, &ts);
+ }
+}
+
+/**
+ * i40e_ptp_stop - Disable the driver/hardware support and unregister the PHC
+ * @pf: Board private structure
+ *
+ * This function handles the cleanup work required from the initialization by
+ * clearing out the important information and unregistering the PHC.
+ **/
+void i40e_ptp_stop(struct i40e_pf *pf)
+{
+ pf->flags &= ~I40E_FLAG_PTP;
+ pf->ptp_tx = false;
+ pf->ptp_rx = false;
+
+ if (pf->ptp_tx_skb) {
+ dev_kfree_skb_any(pf->ptp_tx_skb);
+ pf->ptp_tx_skb = NULL;
+ clear_bit_unlock(__I40E_PTP_TX_IN_PROGRESS, &pf->state);
+ }
+
+ if (pf->ptp_clock) {
+ ptp_clock_unregister(pf->ptp_clock);
+ pf->ptp_clock = NULL;
+ dev_info(&pf->pdev->dev, "%s: removed PHC on %s\n", __func__,
+ pf->vsi[pf->lan_vsi]->netdev->name);
+ }
+}
Code Review / kvmfornfv.git / blobdiff