--- /dev/null
+#
+# Intel network device configuration
+#
+
+config NET_VENDOR_INTEL
+ bool "Intel devices"
+ default y
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about Intel cards. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if NET_VENDOR_INTEL
+
+config E100
+ tristate "Intel(R) PRO/100+ support"
+ depends on PCI
+ select MII
+ ---help---
+ This driver supports Intel(R) PRO/100 family of adapters.
+ To verify that your adapter is supported, find the board ID number
+ on the adapter. Look for a label that has a barcode and a number
+ in the format 123456-001 (six digits hyphen three digits).
+
+ Use the above information and the Adapter & Driver ID Guide at:
+
+ <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+ to identify the adapter.
+
+ For the latest Intel PRO/100 network driver for Linux, see:
+
+ <http://www.intel.com/p/en_US/support/highlights/network/pro100plus>
+
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/e100.txt>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called e100.
+
+config E1000
+ tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
+ depends on PCI
+ ---help---
+ This driver supports Intel(R) PRO/1000 gigabit ethernet family of
+ adapters. For more information on how to identify your adapter, go
+ to the Adapter & Driver ID Guide at:
+
+ <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+ For general information and support, go to the Intel support
+ website at:
+
+ <http://support.intel.com>
+
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/e1000.txt>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called e1000.
+
+config E1000E
+ tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support"
+ depends on PCI && (!SPARC32 || BROKEN)
+ select CRC32
+ select PTP_1588_CLOCK
+ ---help---
+ This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
+ ethernet family of adapters. For PCI or PCI-X e1000 adapters,
+ use the regular e1000 driver For more information on how to
+ identify your adapter, go to the Adapter & Driver ID Guide at:
+
+ <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+ For general information and support, go to the Intel support
+ website at:
+
+ <http://support.intel.com>
+
+ To compile this driver as a module, choose M here. The module
+ will be called e1000e.
+
+config IGB
+ tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support"
+ depends on PCI
+ select PTP_1588_CLOCK
+ select I2C
+ select I2C_ALGOBIT
+ ---help---
+ This driver supports Intel(R) 82575/82576 gigabit ethernet family of
+ adapters. For more information on how to identify your adapter, go
+ to the Adapter & Driver ID Guide at:
+
+ <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+ For general information and support, go to the Intel support
+ website at:
+
+ <http://support.intel.com>
+
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/e1000.txt>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called igb.
+
+config IGB_HWMON
+ bool "Intel(R) PCI-Express Gigabit adapters HWMON support"
+ default y
+ depends on IGB && HWMON && !(IGB=y && HWMON=m)
+ ---help---
+ Say Y if you want to expose thermal sensor data on Intel devices.
+
+ Some of our devices contain thermal sensors, both external and internal.
+ This data is available via the hwmon sysfs interface and exposes
+ the onboard sensors.
+
+config IGB_DCA
+ bool "Direct Cache Access (DCA) Support"
+ default y
+ depends on IGB && DCA && !(IGB=y && DCA=m)
+ ---help---
+ Say Y here if you want to use Direct Cache Access (DCA) in the
+ driver. DCA is a method for warming the CPU cache before data
+ is used, with the intent of lessening the impact of cache misses.
+
+config IGBVF
+ tristate "Intel(R) 82576 Virtual Function Ethernet support"
+ depends on PCI
+ ---help---
+ This driver supports Intel(R) 82576 virtual functions. For more
+ information on how to identify your adapter, go to the Adapter &
+ Driver ID Guide at:
+
+ <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+ For general information and support, go to the Intel support
+ website at:
+
+ <http://support.intel.com>
+
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/e1000.txt>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called igbvf.
+
+config IXGB
+ tristate "Intel(R) PRO/10GbE support"
+ depends on PCI
+ ---help---
+ This driver supports Intel(R) PRO/10GbE family of adapters for
+ PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver
+ instead. For more information on how to identify your adapter, go
+ to the Adapter & Driver ID Guide at:
+
+ <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+ For general information and support, go to the Intel support
+ website at:
+
+ <http://support.intel.com>
+
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/ixgb.txt>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called ixgb.
+
+config IXGBE
+ tristate "Intel(R) 10GbE PCI Express adapters support"
+ depends on PCI
+ select MDIO
+ select PTP_1588_CLOCK
+ ---help---
+ This driver supports Intel(R) 10GbE PCI Express family of
+ adapters. For more information on how to identify your adapter, go
+ to the Adapter & Driver ID Guide at:
+
+ <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+ For general information and support, go to the Intel support
+ website at:
+
+ <http://support.intel.com>
+
+ To compile this driver as a module, choose M here. The module
+ will be called ixgbe.
+
+config IXGBE_VXLAN
+ bool "Virtual eXtensible Local Area Network Support"
+ default n
+ depends on IXGBE && VXLAN && !(IXGBE=y && VXLAN=m)
+ ---help---
+ This allows one to create VXLAN virtual interfaces that provide
+ Layer 2 Networks over Layer 3 Networks. VXLAN is often used
+ to tunnel virtual network infrastructure in virtualized environments.
+ Say Y here if you want to use Virtual eXtensible Local Area Network
+ (VXLAN) in the driver.
+
+config IXGBE_HWMON
+ bool "Intel(R) 10GbE PCI Express adapters HWMON support"
+ default y
+ depends on IXGBE && HWMON && !(IXGBE=y && HWMON=m)
+ ---help---
+ Say Y if you want to expose the thermal sensor data on some of
+ our cards, via a hwmon sysfs interface.
+
+config IXGBE_DCA
+ bool "Direct Cache Access (DCA) Support"
+ default y
+ depends on IXGBE && DCA && !(IXGBE=y && DCA=m)
+ ---help---
+ Say Y here if you want to use Direct Cache Access (DCA) in the
+ driver. DCA is a method for warming the CPU cache before data
+ is used, with the intent of lessening the impact of cache misses.
+
+config IXGBE_DCB
+ bool "Data Center Bridging (DCB) Support"
+ default n
+ depends on IXGBE && DCB
+ ---help---
+ Say Y here if you want to use Data Center Bridging (DCB) in the
+ driver.
+
+ If unsure, say N.
+
+config IXGBEVF
+ tristate "Intel(R) 10GbE PCI Express Virtual Function Ethernet support"
+ depends on PCI_MSI
+ ---help---
+ This driver supports Intel(R) PCI Express virtual functions for the
+ Intel(R) ixgbe driver. For more information on how to identify your
+ adapter, go to the Adapter & Driver ID Guide at:
+
+ <http://support.intel.com/support/network/sb/CS-008441.htm>
+
+ For general information and support, go to the Intel support
+ website at:
+
+ <http://support.intel.com>
+
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/ixgbevf.txt>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called ixgbevf. MSI-X interrupt support is required
+ for this driver to work correctly.
+
+config I40E
+ tristate "Intel(R) Ethernet Controller XL710 Family support"
+ select PTP_1588_CLOCK
+ depends on PCI
+ ---help---
+ This driver supports Intel(R) Ethernet Controller XL710 Family of
+ devices. For more information on how to identify your adapter, go
+ to the Adapter & Driver ID Guide at:
+
+ <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+ For general information and support, go to the Intel support
+ website at:
+
+ <http://support.intel.com>
+
+ To compile this driver as a module, choose M here. The module
+ will be called i40e.
+
+config I40E_VXLAN
+ bool "Virtual eXtensible Local Area Network Support"
+ default n
+ depends on I40E && VXLAN && !(I40E=y && VXLAN=m)
+ ---help---
+ This allows one to create VXLAN virtual interfaces that provide
+ Layer 2 Networks over Layer 3 Networks. VXLAN is often used
+ to tunnel virtual network infrastructure in virtualized environments.
+ Say Y here if you want to use Virtual eXtensible Local Area Network
+ (VXLAN) in the driver.
+
+config I40E_DCB
+ bool "Data Center Bridging (DCB) Support"
+ default n
+ depends on I40E && DCB
+ ---help---
+ Say Y here if you want to use Data Center Bridging (DCB) in the
+ driver.
+
+ If unsure, say N.
+
+config I40E_FCOE
+ bool "Fibre Channel over Ethernet (FCoE)"
+ default n
+ depends on I40E && DCB && FCOE
+ ---help---
+ Say Y here if you want to use Fibre Channel over Ethernet (FCoE)
+ in the driver. This will create new netdev for exclusive FCoE
+ use with XL710 FCoE offloads enabled.
+
+ If unsure, say N.
+
+config I40EVF
+ tristate "Intel(R) XL710 X710 Virtual Function Ethernet support"
+ depends on PCI_MSI
+ ---help---
+ This driver supports Intel(R) XL710 and X710 virtual functions.
+ For more information on how to identify your adapter, go to the
+ Adapter & Driver ID Guide at:
+
+ <http://support.intel.com/support/network/sb/CS-008441.htm>
+
+ For general information and support, go to the Intel support
+ website at:
+
+ <http://support.intel.com>
+
+ To compile this driver as a module, choose M here. The module
+ will be called i40evf. MSI-X interrupt support is required
+ for this driver to work correctly.
+
+config FM10K
+ tristate "Intel(R) FM10000 Ethernet Switch Host Interface Support"
+ default n
+ depends on PCI_MSI
+ select PTP_1588_CLOCK
+ ---help---
+ This driver supports Intel(R) FM10000 Ethernet Switch Host
+ Interface. For more information on how to identify your adapter,
+ go to the Adapter & Driver ID Guide at:
+
+ <http://support.intel.com/support/network/sb/CS-008441.htm>
+
+ For general information and support, go to the Intel support
+ website at:
+
+ <http://support.intel.com>
+
+ To compile this driver as a module, choose M here. The module
+ will be called fm10k. MSI-X interrupt support is required
+
+config FM10K_VXLAN
+ bool "Virtual eXtensible Local Area Network Support"
+ default n
+ depends on FM10K && VXLAN && !(FM10K=y && VXLAN=m)
+ ---help---
+ This allows one to create VXLAN virtual interfaces that provide
+ Layer 2 Networks over Layer 3 Networks. VXLAN is often used
+ to tunnel virtual network infrastructure in virtualized environments.
+ Say Y here if you want to use Virtual eXtensible Local Area Network
+ (VXLAN) in the driver.
+
+endif # NET_VENDOR_INTEL
Code Review / kvmfornfv.git / blobdiff