--- /dev/null
+/*
+ * This file is part of the Chelsio T4 Ethernet driver for Linux.
+ *
+ * Copyright (c) 2003-2014 Chelsio Communications, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/bitmap.h>
+#include <linux/crc32.h>
+#include <linux/ctype.h>
+#include <linux/debugfs.h>
+#include <linux/err.h>
+#include <linux/etherdevice.h>
+#include <linux/firmware.h>
+#include <linux/if.h>
+#include <linux/if_vlan.h>
+#include <linux/init.h>
+#include <linux/log2.h>
+#include <linux/mdio.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/mutex.h>
+#include <linux/netdevice.h>
+#include <linux/pci.h>
+#include <linux/aer.h>
+#include <linux/rtnetlink.h>
+#include <linux/sched.h>
+#include <linux/seq_file.h>
+#include <linux/sockios.h>
+#include <linux/vmalloc.h>
+#include <linux/workqueue.h>
+#include <net/neighbour.h>
+#include <net/netevent.h>
+#include <net/addrconf.h>
+#include <net/bonding.h>
+#include <net/addrconf.h>
+#include <asm/uaccess.h>
+
+#include "cxgb4.h"
+#include "t4_regs.h"
+#include "t4_values.h"
+#include "t4_msg.h"
+#include "t4fw_api.h"
+#include "t4fw_version.h"
+#include "cxgb4_dcb.h"
+#include "cxgb4_debugfs.h"
+#include "clip_tbl.h"
+#include "l2t.h"
+
+char cxgb4_driver_name[] = KBUILD_MODNAME;
+
+#ifdef DRV_VERSION
+#undef DRV_VERSION
+#endif
+#define DRV_VERSION "2.0.0-ko"
+const char cxgb4_driver_version[] = DRV_VERSION;
+#define DRV_DESC "Chelsio T4/T5 Network Driver"
+
+/* Host shadow copy of ingress filter entry. This is in host native format
+ * and doesn't match the ordering or bit order, etc. of the hardware of the
+ * firmware command. The use of bit-field structure elements is purely to
+ * remind ourselves of the field size limitations and save memory in the case
+ * where the filter table is large.
+ */
+struct filter_entry {
+ /* Administrative fields for filter.
+ */
+ u32 valid:1; /* filter allocated and valid */
+ u32 locked:1; /* filter is administratively locked */
+
+ u32 pending:1; /* filter action is pending firmware reply */
+ u32 smtidx:8; /* Source MAC Table index for smac */
+ struct l2t_entry *l2t; /* Layer Two Table entry for dmac */
+
+ /* The filter itself. Most of this is a straight copy of information
+ * provided by the extended ioctl(). Some fields are translated to
+ * internal forms -- for instance the Ingress Queue ID passed in from
+ * the ioctl() is translated into the Absolute Ingress Queue ID.
+ */
+ struct ch_filter_specification fs;
+};
+
+#define DFLT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | \
+ NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP |\
+ NETIF_MSG_RX_ERR | NETIF_MSG_TX_ERR)
+
+/* Macros needed to support the PCI Device ID Table ...
+ */
+#define CH_PCI_DEVICE_ID_TABLE_DEFINE_BEGIN \
+ static const struct pci_device_id cxgb4_pci_tbl[] = {
+#define CH_PCI_DEVICE_ID_FUNCTION 0x4
+
+/* Include PCI Device IDs for both PF4 and PF0-3 so our PCI probe() routine is
+ * called for both.
+ */
+#define CH_PCI_DEVICE_ID_FUNCTION2 0x0
+
+#define CH_PCI_ID_TABLE_ENTRY(devid) \
+ {PCI_VDEVICE(CHELSIO, (devid)), 4}
+
+#define CH_PCI_DEVICE_ID_TABLE_DEFINE_END \
+ { 0, } \
+ }
+
+#include "t4_pci_id_tbl.h"
+
+#define FW4_FNAME "cxgb4/t4fw.bin"
+#define FW5_FNAME "cxgb4/t5fw.bin"
+#define FW4_CFNAME "cxgb4/t4-config.txt"
+#define FW5_CFNAME "cxgb4/t5-config.txt"
+
+MODULE_DESCRIPTION(DRV_DESC);
+MODULE_AUTHOR("Chelsio Communications");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_VERSION(DRV_VERSION);
+MODULE_DEVICE_TABLE(pci, cxgb4_pci_tbl);
+MODULE_FIRMWARE(FW4_FNAME);
+MODULE_FIRMWARE(FW5_FNAME);
+
+/*
+ * Normally we're willing to become the firmware's Master PF but will be happy
+ * if another PF has already become the Master and initialized the adapter.
+ * Setting "force_init" will cause this driver to forcibly establish itself as
+ * the Master PF and initialize the adapter.
+ */
+static uint force_init;
+
+module_param(force_init, uint, 0644);
+MODULE_PARM_DESC(force_init, "Forcibly become Master PF and initialize adapter");
+
+/*
+ * Normally if the firmware we connect to has Configuration File support, we
+ * use that and only fall back to the old Driver-based initialization if the
+ * Configuration File fails for some reason. If force_old_init is set, then
+ * we'll always use the old Driver-based initialization sequence.
+ */
+static uint force_old_init;
+
+module_param(force_old_init, uint, 0644);
+MODULE_PARM_DESC(force_old_init, "Force old initialization sequence, deprecated"
+ " parameter");
+
+static int dflt_msg_enable = DFLT_MSG_ENABLE;
+
+module_param(dflt_msg_enable, int, 0644);
+MODULE_PARM_DESC(dflt_msg_enable, "Chelsio T4 default message enable bitmap");
+
+/*
+ * The driver uses the best interrupt scheme available on a platform in the
+ * order MSI-X, MSI, legacy INTx interrupts. This parameter determines which
+ * of these schemes the driver may consider as follows:
+ *
+ * msi = 2: choose from among all three options
+ * msi = 1: only consider MSI and INTx interrupts
+ * msi = 0: force INTx interrupts
+ */
+static int msi = 2;
+
+module_param(msi, int, 0644);
+MODULE_PARM_DESC(msi, "whether to use INTx (0), MSI (1) or MSI-X (2)");
+
+/*
+ * Queue interrupt hold-off timer values. Queues default to the first of these
+ * upon creation.
+ */
+static unsigned int intr_holdoff[SGE_NTIMERS - 1] = { 5, 10, 20, 50, 100 };
+
+module_param_array(intr_holdoff, uint, NULL, 0644);
+MODULE_PARM_DESC(intr_holdoff, "values for queue interrupt hold-off timers "
+ "0..4 in microseconds, deprecated parameter");
+
+static unsigned int intr_cnt[SGE_NCOUNTERS - 1] = { 4, 8, 16 };
+
+module_param_array(intr_cnt, uint, NULL, 0644);
+MODULE_PARM_DESC(intr_cnt,
+ "thresholds 1..3 for queue interrupt packet counters, "
+ "deprecated parameter");
+
+/*
+ * Normally we tell the chip to deliver Ingress Packets into our DMA buffers
+ * offset by 2 bytes in order to have the IP headers line up on 4-byte
+ * boundaries. This is a requirement for many architectures which will throw
+ * a machine check fault if an attempt is made to access one of the 4-byte IP
+ * header fields on a non-4-byte boundary. And it's a major performance issue
+ * even on some architectures which allow it like some implementations of the
+ * x86 ISA. However, some architectures don't mind this and for some very
+ * edge-case performance sensitive applications (like forwarding large volumes
+ * of small packets), setting this DMA offset to 0 will decrease the number of
+ * PCI-E Bus transfers enough to measurably affect performance.
+ */
+static int rx_dma_offset = 2;
+
+static bool vf_acls;
+
+#ifdef CONFIG_PCI_IOV
+module_param(vf_acls, bool, 0644);
+MODULE_PARM_DESC(vf_acls, "if set enable virtualization L2 ACL enforcement, "
+ "deprecated parameter");
+
+/* Configure the number of PCI-E Virtual Function which are to be instantiated
+ * on SR-IOV Capable Physical Functions.
+ */
+static unsigned int num_vf[NUM_OF_PF_WITH_SRIOV];
+
+module_param_array(num_vf, uint, NULL, 0644);
+MODULE_PARM_DESC(num_vf, "number of VFs for each of PFs 0-3");
+#endif
+
+/* TX Queue select used to determine what algorithm to use for selecting TX
+ * queue. Select between the kernel provided function (select_queue=0) or user
+ * cxgb_select_queue function (select_queue=1)
+ *
+ * Default: select_queue=0
+ */
+static int select_queue;
+module_param(select_queue, int, 0644);
+MODULE_PARM_DESC(select_queue,
+ "Select between kernel provided method of selecting or driver method of selecting TX queue. Default is kernel method.");
+
+static unsigned int tp_vlan_pri_map = HW_TPL_FR_MT_PR_IV_P_FC;
+
+module_param(tp_vlan_pri_map, uint, 0644);
+MODULE_PARM_DESC(tp_vlan_pri_map, "global compressed filter configuration, "
+ "deprecated parameter");
+
+static struct dentry *cxgb4_debugfs_root;
+
+static LIST_HEAD(adapter_list);
+static DEFINE_MUTEX(uld_mutex);
+/* Adapter list to be accessed from atomic context */
+static LIST_HEAD(adap_rcu_list);
+static DEFINE_SPINLOCK(adap_rcu_lock);
+static struct cxgb4_uld_info ulds[CXGB4_ULD_MAX];
+static const char *uld_str[] = { "RDMA", "iSCSI" };
+
+static void link_report(struct net_device *dev)
+{
+ if (!netif_carrier_ok(dev))
+ netdev_info(dev, "link down\n");
+ else {
+ static const char *fc[] = { "no", "Rx", "Tx", "Tx/Rx" };
+
+ const char *s = "10Mbps";
+ const struct port_info *p = netdev_priv(dev);
+
+ switch (p->link_cfg.speed) {
+ case 10000:
+ s = "10Gbps";
+ break;
+ case 1000:
+ s = "1000Mbps";
+ break;
+ case 100:
+ s = "100Mbps";
+ break;
+ case 40000:
+ s = "40Gbps";
+ break;
+ }
+
+ netdev_info(dev, "link up, %s, full-duplex, %s PAUSE\n", s,
+ fc[p->link_cfg.fc]);
+ }
+}
+
+#ifdef CONFIG_CHELSIO_T4_DCB
+/* Set up/tear down Data Center Bridging Priority mapping for a net device. */
+static void dcb_tx_queue_prio_enable(struct net_device *dev, int enable)
+{
+ struct port_info *pi = netdev_priv(dev);
+ struct adapter *adap = pi->adapter;
+ struct sge_eth_txq *txq = &adap->sge.ethtxq[pi->first_qset];
+ int i;
+
+ /* We use a simple mapping of Port TX Queue Index to DCB
+ * Priority when we're enabling DCB.
+ */
+ for (i = 0; i < pi->nqsets; i++, txq++) {
+ u32 name, value;
+ int err;
+
+ name = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DMAQ) |
+ FW_PARAMS_PARAM_X_V(
+ FW_PARAMS_PARAM_DMAQ_EQ_DCBPRIO_ETH) |
+ FW_PARAMS_PARAM_YZ_V(txq->q.cntxt_id));
+ value = enable ? i : 0xffffffff;
+
+ /* Since we can be called while atomic (from "interrupt
+ * level") we need to issue the Set Parameters Commannd
+ * without sleeping (timeout < 0).
+ */
+ err = t4_set_params_nosleep(adap, adap->mbox, adap->fn, 0, 1,
+ &name, &value);
+
+ if (err)
+ dev_err(adap->pdev_dev,
+ "Can't %s DCB Priority on port %d, TX Queue %d: err=%d\n",
+ enable ? "set" : "unset", pi->port_id, i, -err);
+ else
+ txq->dcb_prio = value;
+ }
+}
+#endif /* CONFIG_CHELSIO_T4_DCB */
+
+void t4_os_link_changed(struct adapter *adapter, int port_id, int link_stat)
+{
+ struct net_device *dev = adapter->port[port_id];
+
+ /* Skip changes from disabled ports. */
+ if (netif_running(dev) && link_stat != netif_carrier_ok(dev)) {
+ if (link_stat)
+ netif_carrier_on(dev);
+ else {
+#ifdef CONFIG_CHELSIO_T4_DCB
+ cxgb4_dcb_state_init(dev);
+ dcb_tx_queue_prio_enable(dev, false);
+#endif /* CONFIG_CHELSIO_T4_DCB */
+ netif_carrier_off(dev);
+ }
+
+ link_report(dev);
+ }
+}
+
+void t4_os_portmod_changed(const struct adapter *adap, int port_id)
+{
+ static const char *mod_str[] = {
+ NULL, "LR", "SR", "ER", "passive DA", "active DA", "LRM"
+ };
+
+ const struct net_device *dev = adap->port[port_id];
+ const struct port_info *pi = netdev_priv(dev);
+
+ if (pi->mod_type == FW_PORT_MOD_TYPE_NONE)
+ netdev_info(dev, "port module unplugged\n");
+ else if (pi->mod_type < ARRAY_SIZE(mod_str))
+ netdev_info(dev, "%s module inserted\n", mod_str[pi->mod_type]);
+}
+
+/*
+ * Configure the exact and hash address filters to handle a port's multicast
+ * and secondary unicast MAC addresses.
+ */
+static int set_addr_filters(const struct net_device *dev, bool sleep)
+{
+ u64 mhash = 0;
+ u64 uhash = 0;
+ bool free = true;
+ u16 filt_idx[7];
+ const u8 *addr[7];
+ int ret, naddr = 0;
+ const struct netdev_hw_addr *ha;
+ int uc_cnt = netdev_uc_count(dev);
+ int mc_cnt = netdev_mc_count(dev);
+ const struct port_info *pi = netdev_priv(dev);
+ unsigned int mb = pi->adapter->fn;
+
+ /* first do the secondary unicast addresses */
+ netdev_for_each_uc_addr(ha, dev) {
+ addr[naddr++] = ha->addr;
+ if (--uc_cnt == 0 || naddr >= ARRAY_SIZE(addr)) {
+ ret = t4_alloc_mac_filt(pi->adapter, mb, pi->viid, free,
+ naddr, addr, filt_idx, &uhash, sleep);
+ if (ret < 0)
+ return ret;
+
+ free = false;
+ naddr = 0;
+ }
+ }
+
+ /* next set up the multicast addresses */
+ netdev_for_each_mc_addr(ha, dev) {
+ addr[naddr++] = ha->addr;
+ if (--mc_cnt == 0 || naddr >= ARRAY_SIZE(addr)) {
+ ret = t4_alloc_mac_filt(pi->adapter, mb, pi->viid, free,
+ naddr, addr, filt_idx, &mhash, sleep);
+ if (ret < 0)
+ return ret;
+
+ free = false;
+ naddr = 0;
+ }
+ }
+
+ return t4_set_addr_hash(pi->adapter, mb, pi->viid, uhash != 0,
+ uhash | mhash, sleep);
+}
+
+int dbfifo_int_thresh = 10; /* 10 == 640 entry threshold */
+module_param(dbfifo_int_thresh, int, 0644);
+MODULE_PARM_DESC(dbfifo_int_thresh, "doorbell fifo interrupt threshold");
+
+/*
+ * usecs to sleep while draining the dbfifo
+ */
+static int dbfifo_drain_delay = 1000;
+module_param(dbfifo_drain_delay, int, 0644);
+MODULE_PARM_DESC(dbfifo_drain_delay,
+ "usecs to sleep while draining the dbfifo");
+
+/*
+ * Set Rx properties of a port, such as promiscruity, address filters, and MTU.
+ * If @mtu is -1 it is left unchanged.
+ */
+static int set_rxmode(struct net_device *dev, int mtu, bool sleep_ok)
+{
+ int ret;
+ struct port_info *pi = netdev_priv(dev);
+
+ ret = set_addr_filters(dev, sleep_ok);
+ if (ret == 0)
+ ret = t4_set_rxmode(pi->adapter, pi->adapter->fn, pi->viid, mtu,
+ (dev->flags & IFF_PROMISC) ? 1 : 0,
+ (dev->flags & IFF_ALLMULTI) ? 1 : 0, 1, -1,
+ sleep_ok);
+ return ret;
+}
+
+/**
+ * link_start - enable a port
+ * @dev: the port to enable
+ *
+ * Performs the MAC and PHY actions needed to enable a port.
+ */
+static int link_start(struct net_device *dev)
+{
+ int ret;
+ struct port_info *pi = netdev_priv(dev);
+ unsigned int mb = pi->adapter->fn;
+
+ /*
+ * We do not set address filters and promiscuity here, the stack does
+ * that step explicitly.
+ */
+ ret = t4_set_rxmode(pi->adapter, mb, pi->viid, dev->mtu, -1, -1, -1,
+ !!(dev->features & NETIF_F_HW_VLAN_CTAG_RX), true);
+ if (ret == 0) {
+ ret = t4_change_mac(pi->adapter, mb, pi->viid,
+ pi->xact_addr_filt, dev->dev_addr, true,
+ true);
+ if (ret >= 0) {
+ pi->xact_addr_filt = ret;
+ ret = 0;
+ }
+ }
+ if (ret == 0)
+ ret = t4_link_start(pi->adapter, mb, pi->tx_chan,
+ &pi->link_cfg);
+ if (ret == 0) {
+ local_bh_disable();
+ ret = t4_enable_vi_params(pi->adapter, mb, pi->viid, true,
+ true, CXGB4_DCB_ENABLED);
+ local_bh_enable();
+ }
+
+ return ret;
+}
+
+int cxgb4_dcb_enabled(const struct net_device *dev)
+{
+#ifdef CONFIG_CHELSIO_T4_DCB
+ struct port_info *pi = netdev_priv(dev);
+
+ if (!pi->dcb.enabled)
+ return 0;
+
+ return ((pi->dcb.state == CXGB4_DCB_STATE_FW_ALLSYNCED) ||
+ (pi->dcb.state == CXGB4_DCB_STATE_HOST));
+#else
+ return 0;
+#endif
+}
+EXPORT_SYMBOL(cxgb4_dcb_enabled);
+
+#ifdef CONFIG_CHELSIO_T4_DCB
+/* Handle a Data Center Bridging update message from the firmware. */
+static void dcb_rpl(struct adapter *adap, const struct fw_port_cmd *pcmd)
+{
+ int port = FW_PORT_CMD_PORTID_G(ntohl(pcmd->op_to_portid));
+ struct net_device *dev = adap->port[port];
+ int old_dcb_enabled = cxgb4_dcb_enabled(dev);
+ int new_dcb_enabled;
+
+ cxgb4_dcb_handle_fw_update(adap, pcmd);
+ new_dcb_enabled = cxgb4_dcb_enabled(dev);
+
+ /* If the DCB has become enabled or disabled on the port then we're
+ * going to need to set up/tear down DCB Priority parameters for the
+ * TX Queues associated with the port.
+ */
+ if (new_dcb_enabled != old_dcb_enabled)
+ dcb_tx_queue_prio_enable(dev, new_dcb_enabled);
+}
+#endif /* CONFIG_CHELSIO_T4_DCB */
+
+/* Clear a filter and release any of its resources that we own. This also
+ * clears the filter's "pending" status.
+ */
+static void clear_filter(struct adapter *adap, struct filter_entry *f)
+{
+ /* If the new or old filter have loopback rewriteing rules then we'll
+ * need to free any existing Layer Two Table (L2T) entries of the old
+ * filter rule. The firmware will handle freeing up any Source MAC
+ * Table (SMT) entries used for rewriting Source MAC Addresses in
+ * loopback rules.
+ */
+ if (f->l2t)
+ cxgb4_l2t_release(f->l2t);
+
+ /* The zeroing of the filter rule below clears the filter valid,
+ * pending, locked flags, l2t pointer, etc. so it's all we need for
+ * this operation.
+ */
+ memset(f, 0, sizeof(*f));
+}
+
+/* Handle a filter write/deletion reply.
+ */
+static void filter_rpl(struct adapter *adap, const struct cpl_set_tcb_rpl *rpl)
+{
+ unsigned int idx = GET_TID(rpl);
+ unsigned int nidx = idx - adap->tids.ftid_base;
+ unsigned int ret;
+ struct filter_entry *f;
+
+ if (idx >= adap->tids.ftid_base && nidx <
+ (adap->tids.nftids + adap->tids.nsftids)) {
+ idx = nidx;
+ ret = TCB_COOKIE_G(rpl->cookie);
+ f = &adap->tids.ftid_tab[idx];
+
+ if (ret == FW_FILTER_WR_FLT_DELETED) {
+ /* Clear the filter when we get confirmation from the
+ * hardware that the filter has been deleted.
+ */
+ clear_filter(adap, f);
+ } else if (ret == FW_FILTER_WR_SMT_TBL_FULL) {
+ dev_err(adap->pdev_dev, "filter %u setup failed due to full SMT\n",
+ idx);
+ clear_filter(adap, f);
+ } else if (ret == FW_FILTER_WR_FLT_ADDED) {
+ f->smtidx = (be64_to_cpu(rpl->oldval) >> 24) & 0xff;
+ f->pending = 0; /* asynchronous setup completed */
+ f->valid = 1;
+ } else {
+ /* Something went wrong. Issue a warning about the
+ * problem and clear everything out.
+ */
+ dev_err(adap->pdev_dev, "filter %u setup failed with error %u\n",
+ idx, ret);
+ clear_filter(adap, f);
+ }
+ }
+}
+
+/* Response queue handler for the FW event queue.
+ */
+static int fwevtq_handler(struct sge_rspq *q, const __be64 *rsp,
+ const struct pkt_gl *gl)
+{
+ u8 opcode = ((const struct rss_header *)rsp)->opcode;
+
+ rsp++; /* skip RSS header */
+
+ /* FW can send EGR_UPDATEs encapsulated in a CPL_FW4_MSG.
+ */
+ if (unlikely(opcode == CPL_FW4_MSG &&
+ ((const struct cpl_fw4_msg *)rsp)->type == FW_TYPE_RSSCPL)) {
+ rsp++;
+ opcode = ((const struct rss_header *)rsp)->opcode;
+ rsp++;
+ if (opcode != CPL_SGE_EGR_UPDATE) {
+ dev_err(q->adap->pdev_dev, "unexpected FW4/CPL %#x on FW event queue\n"
+ , opcode);
+ goto out;
+ }
+ }
+
+ if (likely(opcode == CPL_SGE_EGR_UPDATE)) {
+ const struct cpl_sge_egr_update *p = (void *)rsp;
+ unsigned int qid = EGR_QID_G(ntohl(p->opcode_qid));
+ struct sge_txq *txq;
+
+ txq = q->adap->sge.egr_map[qid - q->adap->sge.egr_start];
+ txq->restarts++;
+ if ((u8 *)txq < (u8 *)q->adap->sge.ofldtxq) {
+ struct sge_eth_txq *eq;
+
+ eq = container_of(txq, struct sge_eth_txq, q);
+ netif_tx_wake_queue(eq->txq);
+ } else {
+ struct sge_ofld_txq *oq;
+
+ oq = container_of(txq, struct sge_ofld_txq, q);
+ tasklet_schedule(&oq->qresume_tsk);
+ }
+ } else if (opcode == CPL_FW6_MSG || opcode == CPL_FW4_MSG) {
+ const struct cpl_fw6_msg *p = (void *)rsp;
+
+#ifdef CONFIG_CHELSIO_T4_DCB
+ const struct fw_port_cmd *pcmd = (const void *)p->data;
+ unsigned int cmd = FW_CMD_OP_G(ntohl(pcmd->op_to_portid));
+ unsigned int action =
+ FW_PORT_CMD_ACTION_G(ntohl(pcmd->action_to_len16));
+
+ if (cmd == FW_PORT_CMD &&
+ action == FW_PORT_ACTION_GET_PORT_INFO) {
+ int port = FW_PORT_CMD_PORTID_G(
+ be32_to_cpu(pcmd->op_to_portid));
+ struct net_device *dev = q->adap->port[port];
+ int state_input = ((pcmd->u.info.dcbxdis_pkd &
+ FW_PORT_CMD_DCBXDIS_F)
+ ? CXGB4_DCB_INPUT_FW_DISABLED
+ : CXGB4_DCB_INPUT_FW_ENABLED);
+
+ cxgb4_dcb_state_fsm(dev, state_input);
+ }
+
+ if (cmd == FW_PORT_CMD &&
+ action == FW_PORT_ACTION_L2_DCB_CFG)
+ dcb_rpl(q->adap, pcmd);
+ else
+#endif
+ if (p->type == 0)
+ t4_handle_fw_rpl(q->adap, p->data);
+ } else if (opcode == CPL_L2T_WRITE_RPL) {
+ const struct cpl_l2t_write_rpl *p = (void *)rsp;
+
+ do_l2t_write_rpl(q->adap, p);
+ } else if (opcode == CPL_SET_TCB_RPL) {
+ const struct cpl_set_tcb_rpl *p = (void *)rsp;
+
+ filter_rpl(q->adap, p);
+ } else
+ dev_err(q->adap->pdev_dev,
+ "unexpected CPL %#x on FW event queue\n", opcode);
+out:
+ return 0;
+}
+
+/**
+ * uldrx_handler - response queue handler for ULD queues
+ * @q: the response queue that received the packet
+ * @rsp: the response queue descriptor holding the offload message
+ * @gl: the gather list of packet fragments
+ *
+ * Deliver an ingress offload packet to a ULD. All processing is done by
+ * the ULD, we just maintain statistics.
+ */
+static int uldrx_handler(struct sge_rspq *q, const __be64 *rsp,
+ const struct pkt_gl *gl)
+{
+ struct sge_ofld_rxq *rxq = container_of(q, struct sge_ofld_rxq, rspq);
+
+ /* FW can send CPLs encapsulated in a CPL_FW4_MSG.
+ */
+ if (((const struct rss_header *)rsp)->opcode == CPL_FW4_MSG &&
+ ((const struct cpl_fw4_msg *)(rsp + 1))->type == FW_TYPE_RSSCPL)
+ rsp += 2;
+
+ if (ulds[q->uld].rx_handler(q->adap->uld_handle[q->uld], rsp, gl)) {
+ rxq->stats.nomem++;
+ return -1;
+ }
+ if (gl == NULL)
+ rxq->stats.imm++;
+ else if (gl == CXGB4_MSG_AN)
+ rxq->stats.an++;
+ else
+ rxq->stats.pkts++;
+ return 0;
+}
+
+static void disable_msi(struct adapter *adapter)
+{
+ if (adapter->flags & USING_MSIX) {
+ pci_disable_msix(adapter->pdev);
+ adapter->flags &= ~USING_MSIX;
+ } else if (adapter->flags & USING_MSI) {
+ pci_disable_msi(adapter->pdev);
+ adapter->flags &= ~USING_MSI;
+ }
+}
+
+/*
+ * Interrupt handler for non-data events used with MSI-X.
+ */
+static irqreturn_t t4_nondata_intr(int irq, void *cookie)
+{
+ struct adapter *adap = cookie;
+ u32 v = t4_read_reg(adap, MYPF_REG(PL_PF_INT_CAUSE_A));
+
+ if (v & PFSW_F) {
+ adap->swintr = 1;
+ t4_write_reg(adap, MYPF_REG(PL_PF_INT_CAUSE_A), v);
+ }
+ if (adap->flags & MASTER_PF)
+ t4_slow_intr_handler(adap);
+ return IRQ_HANDLED;
+}
+
+/*
+ * Name the MSI-X interrupts.
+ */
+static void name_msix_vecs(struct adapter *adap)
+{
+ int i, j, msi_idx = 2, n = sizeof(adap->msix_info[0].desc);
+
+ /* non-data interrupts */
+ snprintf(adap->msix_info[0].desc, n, "%s", adap->port[0]->name);
+
+ /* FW events */
+ snprintf(adap->msix_info[1].desc, n, "%s-FWeventq",
+ adap->port[0]->name);
+
+ /* Ethernet queues */
+ for_each_port(adap, j) {
+ struct net_device *d = adap->port[j];
+ const struct port_info *pi = netdev_priv(d);
+
+ for (i = 0; i < pi->nqsets; i++, msi_idx++)
+ snprintf(adap->msix_info[msi_idx].desc, n, "%s-Rx%d",
+ d->name, i);
+ }
+
+ /* offload queues */
+ for_each_ofldrxq(&adap->sge, i)
+ snprintf(adap->msix_info[msi_idx++].desc, n, "%s-ofld%d",
+ adap->port[0]->name, i);
+
+ for_each_rdmarxq(&adap->sge, i)
+ snprintf(adap->msix_info[msi_idx++].desc, n, "%s-rdma%d",
+ adap->port[0]->name, i);
+
+ for_each_rdmaciq(&adap->sge, i)
+ snprintf(adap->msix_info[msi_idx++].desc, n, "%s-rdma-ciq%d",
+ adap->port[0]->name, i);
+}
+
+static int request_msix_queue_irqs(struct adapter *adap)
+{
+ struct sge *s = &adap->sge;
+ int err, ethqidx, ofldqidx = 0, rdmaqidx = 0, rdmaciqqidx = 0;
+ int msi_index = 2;
+
+ err = request_irq(adap->msix_info[1].vec, t4_sge_intr_msix, 0,
+ adap->msix_info[1].desc, &s->fw_evtq);
+ if (err)
+ return err;
+
+ for_each_ethrxq(s, ethqidx) {
+ err = request_irq(adap->msix_info[msi_index].vec,
+ t4_sge_intr_msix, 0,
+ adap->msix_info[msi_index].desc,
+ &s->ethrxq[ethqidx].rspq);
+ if (err)
+ goto unwind;
+ msi_index++;
+ }
+ for_each_ofldrxq(s, ofldqidx) {
+ err = request_irq(adap->msix_info[msi_index].vec,
+ t4_sge_intr_msix, 0,
+ adap->msix_info[msi_index].desc,
+ &s->ofldrxq[ofldqidx].rspq);
+ if (err)
+ goto unwind;
+ msi_index++;
+ }
+ for_each_rdmarxq(s, rdmaqidx) {
+ err = request_irq(adap->msix_info[msi_index].vec,
+ t4_sge_intr_msix, 0,
+ adap->msix_info[msi_index].desc,
+ &s->rdmarxq[rdmaqidx].rspq);
+ if (err)
+ goto unwind;
+ msi_index++;
+ }
+ for_each_rdmaciq(s, rdmaciqqidx) {
+ err = request_irq(adap->msix_info[msi_index].vec,
+ t4_sge_intr_msix, 0,
+ adap->msix_info[msi_index].desc,
+ &s->rdmaciq[rdmaciqqidx].rspq);
+ if (err)
+ goto unwind;
+ msi_index++;
+ }
+ return 0;
+
+unwind:
+ while (--rdmaciqqidx >= 0)
+ free_irq(adap->msix_info[--msi_index].vec,
+ &s->rdmaciq[rdmaciqqidx].rspq);
+ while (--rdmaqidx >= 0)
+ free_irq(adap->msix_info[--msi_index].vec,
+ &s->rdmarxq[rdmaqidx].rspq);
+ while (--ofldqidx >= 0)
+ free_irq(adap->msix_info[--msi_index].vec,
+ &s->ofldrxq[ofldqidx].rspq);
+ while (--ethqidx >= 0)
+ free_irq(adap->msix_info[--msi_index].vec,
+ &s->ethrxq[ethqidx].rspq);
+ free_irq(adap->msix_info[1].vec, &s->fw_evtq);
+ return err;
+}
+
+static void free_msix_queue_irqs(struct adapter *adap)
+{
+ int i, msi_index = 2;
+ struct sge *s = &adap->sge;
+
+ free_irq(adap->msix_info[1].vec, &s->fw_evtq);
+ for_each_ethrxq(s, i)
+ free_irq(adap->msix_info[msi_index++].vec, &s->ethrxq[i].rspq);
+ for_each_ofldrxq(s, i)
+ free_irq(adap->msix_info[msi_index++].vec, &s->ofldrxq[i].rspq);
+ for_each_rdmarxq(s, i)
+ free_irq(adap->msix_info[msi_index++].vec, &s->rdmarxq[i].rspq);
+ for_each_rdmaciq(s, i)
+ free_irq(adap->msix_info[msi_index++].vec, &s->rdmaciq[i].rspq);
+}
+
+/**
+ * cxgb4_write_rss - write the RSS table for a given port
+ * @pi: the port
+ * @queues: array of queue indices for RSS
+ *
+ * Sets up the portion of the HW RSS table for the port's VI to distribute
+ * packets to the Rx queues in @queues.
+ */
+int cxgb4_write_rss(const struct port_info *pi, const u16 *queues)
+{
+ u16 *rss;
+ int i, err;
+ const struct sge_eth_rxq *q = &pi->adapter->sge.ethrxq[pi->first_qset];
+
+ rss = kmalloc(pi->rss_size * sizeof(u16), GFP_KERNEL);
+ if (!rss)
+ return -ENOMEM;
+
+ /* map the queue indices to queue ids */
+ for (i = 0; i < pi->rss_size; i++, queues++)
+ rss[i] = q[*queues].rspq.abs_id;
+
+ err = t4_config_rss_range(pi->adapter, pi->adapter->fn, pi->viid, 0,
+ pi->rss_size, rss, pi->rss_size);
+ kfree(rss);
+ return err;
+}
+
+/**
+ * setup_rss - configure RSS
+ * @adap: the adapter
+ *
+ * Sets up RSS for each port.
+ */
+static int setup_rss(struct adapter *adap)
+{
+ int i, err;
+
+ for_each_port(adap, i) {
+ const struct port_info *pi = adap2pinfo(adap, i);
+
+ err = cxgb4_write_rss(pi, pi->rss);
+ if (err)
+ return err;
+ }
+ return 0;
+}
+
+/*
+ * Return the channel of the ingress queue with the given qid.
+ */
+static unsigned int rxq_to_chan(const struct sge *p, unsigned int qid)
+{
+ qid -= p->ingr_start;
+ return netdev2pinfo(p->ingr_map[qid]->netdev)->tx_chan;
+}
+
+/*
+ * Wait until all NAPI handlers are descheduled.
+ */
+static void quiesce_rx(struct adapter *adap)
+{
+ int i;
+
+ for (i = 0; i < adap->sge.ingr_sz; i++) {
+ struct sge_rspq *q = adap->sge.ingr_map[i];
+
+ if (q && q->handler) {
+ napi_disable(&q->napi);
+ local_bh_disable();
+ while (!cxgb_poll_lock_napi(q))
+ mdelay(1);
+ local_bh_enable();
+ }
+
+ }
+}
+
+/* Disable interrupt and napi handler */
+static void disable_interrupts(struct adapter *adap)
+{
+ if (adap->flags & FULL_INIT_DONE) {
+ t4_intr_disable(adap);
+ if (adap->flags & USING_MSIX) {
+ free_msix_queue_irqs(adap);
+ free_irq(adap->msix_info[0].vec, adap);
+ } else {
+ free_irq(adap->pdev->irq, adap);
+ }
+ quiesce_rx(adap);
+ }
+}
+
+/*
+ * Enable NAPI scheduling and interrupt generation for all Rx queues.
+ */
+static void enable_rx(struct adapter *adap)
+{
+ int i;
+
+ for (i = 0; i < adap->sge.ingr_sz; i++) {
+ struct sge_rspq *q = adap->sge.ingr_map[i];
+
+ if (!q)
+ continue;
+ if (q->handler) {
+ cxgb_busy_poll_init_lock(q);
+ napi_enable(&q->napi);
+ }
+ /* 0-increment GTS to start the timer and enable interrupts */
+ t4_write_reg(adap, MYPF_REG(SGE_PF_GTS_A),
+ SEINTARM_V(q->intr_params) |
+ INGRESSQID_V(q->cntxt_id));
+ }
+}
+
+static int alloc_ofld_rxqs(struct adapter *adap, struct sge_ofld_rxq *q,
+ unsigned int nq, unsigned int per_chan, int msi_idx,
+ u16 *ids)
+{
+ int i, err;
+
+ for (i = 0; i < nq; i++, q++) {
+ if (msi_idx > 0)
+ msi_idx++;
+ err = t4_sge_alloc_rxq(adap, &q->rspq, false,
+ adap->port[i / per_chan],
+ msi_idx, q->fl.size ? &q->fl : NULL,
+ uldrx_handler);
+ if (err)
+ return err;
+ memset(&q->stats, 0, sizeof(q->stats));
+ if (ids)
+ ids[i] = q->rspq.abs_id;
+ }
+ return 0;
+}
+
+/**
+ * setup_sge_queues - configure SGE Tx/Rx/response queues
+ * @adap: the adapter
+ *
+ * Determines how many sets of SGE queues to use and initializes them.
+ * We support multiple queue sets per port if we have MSI-X, otherwise
+ * just one queue set per port.
+ */
+static int setup_sge_queues(struct adapter *adap)
+{
+ int err, msi_idx, i, j;
+ struct sge *s = &adap->sge;
+
+ bitmap_zero(s->starving_fl, s->egr_sz);
+ bitmap_zero(s->txq_maperr, s->egr_sz);
+
+ if (adap->flags & USING_MSIX)
+ msi_idx = 1; /* vector 0 is for non-queue interrupts */
+ else {
+ err = t4_sge_alloc_rxq(adap, &s->intrq, false, adap->port[0], 0,
+ NULL, NULL);
+ if (err)
+ return err;
+ msi_idx = -((int)s->intrq.abs_id + 1);
+ }
+
+ /* NOTE: If you add/delete any Ingress/Egress Queue allocations in here,
+ * don't forget to update the following which need to be
+ * synchronized to and changes here.
+ *
+ * 1. The calculations of MAX_INGQ in cxgb4.h.
+ *
+ * 2. Update enable_msix/name_msix_vecs/request_msix_queue_irqs
+ * to accommodate any new/deleted Ingress Queues
+ * which need MSI-X Vectors.
+ *
+ * 3. Update sge_qinfo_show() to include information on the
+ * new/deleted queues.
+ */
+ err = t4_sge_alloc_rxq(adap, &s->fw_evtq, true, adap->port[0],
+ msi_idx, NULL, fwevtq_handler);
+ if (err) {
+freeout: t4_free_sge_resources(adap);
+ return err;
+ }
+
+ for_each_port(adap, i) {
+ struct net_device *dev = adap->port[i];
+ struct port_info *pi = netdev_priv(dev);
+ struct sge_eth_rxq *q = &s->ethrxq[pi->first_qset];
+ struct sge_eth_txq *t = &s->ethtxq[pi->first_qset];
+
+ for (j = 0; j < pi->nqsets; j++, q++) {
+ if (msi_idx > 0)
+ msi_idx++;
+ err = t4_sge_alloc_rxq(adap, &q->rspq, false, dev,
+ msi_idx, &q->fl,
+ t4_ethrx_handler);
+ if (err)
+ goto freeout;
+ q->rspq.idx = j;
+ memset(&q->stats, 0, sizeof(q->stats));
+ }
+ for (j = 0; j < pi->nqsets; j++, t++) {
+ err = t4_sge_alloc_eth_txq(adap, t, dev,
+ netdev_get_tx_queue(dev, j),
+ s->fw_evtq.cntxt_id);
+ if (err)
+ goto freeout;
+ }
+ }
+
+ j = s->ofldqsets / adap->params.nports; /* ofld queues per channel */
+ for_each_ofldrxq(s, i) {
+ err = t4_sge_alloc_ofld_txq(adap, &s->ofldtxq[i],
+ adap->port[i / j],
+ s->fw_evtq.cntxt_id);
+ if (err)
+ goto freeout;
+ }
+
+#define ALLOC_OFLD_RXQS(firstq, nq, per_chan, ids) do { \
+ err = alloc_ofld_rxqs(adap, firstq, nq, per_chan, msi_idx, ids); \
+ if (err) \
+ goto freeout; \
+ if (msi_idx > 0) \
+ msi_idx += nq; \
+} while (0)
+
+ ALLOC_OFLD_RXQS(s->ofldrxq, s->ofldqsets, j, s->ofld_rxq);
+ ALLOC_OFLD_RXQS(s->rdmarxq, s->rdmaqs, 1, s->rdma_rxq);
+ j = s->rdmaciqs / adap->params.nports; /* rdmaq queues per channel */
+ ALLOC_OFLD_RXQS(s->rdmaciq, s->rdmaciqs, j, s->rdma_ciq);
+
+#undef ALLOC_OFLD_RXQS
+
+ for_each_port(adap, i) {
+ /*
+ * Note that ->rdmarxq[i].rspq.cntxt_id below is 0 if we don't
+ * have RDMA queues, and that's the right value.
+ */
+ err = t4_sge_alloc_ctrl_txq(adap, &s->ctrlq[i], adap->port[i],
+ s->fw_evtq.cntxt_id,
+ s->rdmarxq[i].rspq.cntxt_id);
+ if (err)
+ goto freeout;
+ }
+
+ t4_write_reg(adap, is_t4(adap->params.chip) ?
+ MPS_TRC_RSS_CONTROL_A :
+ MPS_T5_TRC_RSS_CONTROL_A,
+ RSSCONTROL_V(netdev2pinfo(adap->port[0])->tx_chan) |
+ QUEUENUMBER_V(s->ethrxq[0].rspq.abs_id));
+ return 0;
+}
+
+/*
+ * Allocate a chunk of memory using kmalloc or, if that fails, vmalloc.
+ * The allocated memory is cleared.
+ */
+void *t4_alloc_mem(size_t size)
+{
+ void *p = kzalloc(size, GFP_KERNEL | __GFP_NOWARN);
+
+ if (!p)
+ p = vzalloc(size);
+ return p;
+}
+
+/*
+ * Free memory allocated through alloc_mem().
+ */
+void t4_free_mem(void *addr)
+{
+ if (is_vmalloc_addr(addr))
+ vfree(addr);
+ else
+ kfree(addr);
+}
+
+/* Send a Work Request to write the filter at a specified index. We construct
+ * a Firmware Filter Work Request to have the work done and put the indicated
+ * filter into "pending" mode which will prevent any further actions against
+ * it till we get a reply from the firmware on the completion status of the
+ * request.
+ */
+static int set_filter_wr(struct adapter *adapter, int fidx)
+{
+ struct filter_entry *f = &adapter->tids.ftid_tab[fidx];
+ struct sk_buff *skb;
+ struct fw_filter_wr *fwr;
+ unsigned int ftid;
+
+ skb = alloc_skb(sizeof(*fwr), GFP_KERNEL);
+ if (!skb)
+ return -ENOMEM;
+
+ /* If the new filter requires loopback Destination MAC and/or VLAN
+ * rewriting then we need to allocate a Layer 2 Table (L2T) entry for
+ * the filter.
+ */
+ if (f->fs.newdmac || f->fs.newvlan) {
+ /* allocate L2T entry for new filter */
+ f->l2t = t4_l2t_alloc_switching(adapter->l2t);
+ if (f->l2t == NULL) {
+ kfree_skb(skb);
+ return -EAGAIN;
+ }
+ if (t4_l2t_set_switching(adapter, f->l2t, f->fs.vlan,
+ f->fs.eport, f->fs.dmac)) {
+ cxgb4_l2t_release(f->l2t);
+ f->l2t = NULL;
+ kfree_skb(skb);
+ return -ENOMEM;
+ }
+ }
+
+ ftid = adapter->tids.ftid_base + fidx;
+
+ fwr = (struct fw_filter_wr *)__skb_put(skb, sizeof(*fwr));
+ memset(fwr, 0, sizeof(*fwr));
+
+ /* It would be nice to put most of the following in t4_hw.c but most
+ * of the work is translating the cxgbtool ch_filter_specification
+ * into the Work Request and the definition of that structure is
+ * currently in cxgbtool.h which isn't appropriate to pull into the
+ * common code. We may eventually try to come up with a more neutral
+ * filter specification structure but for now it's easiest to simply
+ * put this fairly direct code in line ...
+ */
+ fwr->op_pkd = htonl(FW_WR_OP_V(FW_FILTER_WR));
+ fwr->len16_pkd = htonl(FW_WR_LEN16_V(sizeof(*fwr)/16));
+ fwr->tid_to_iq =
+ htonl(FW_FILTER_WR_TID_V(ftid) |
+ FW_FILTER_WR_RQTYPE_V(f->fs.type) |
+ FW_FILTER_WR_NOREPLY_V(0) |
+ FW_FILTER_WR_IQ_V(f->fs.iq));
+ fwr->del_filter_to_l2tix =
+ htonl(FW_FILTER_WR_RPTTID_V(f->fs.rpttid) |
+ FW_FILTER_WR_DROP_V(f->fs.action == FILTER_DROP) |
+ FW_FILTER_WR_DIRSTEER_V(f->fs.dirsteer) |
+ FW_FILTER_WR_MASKHASH_V(f->fs.maskhash) |
+ FW_FILTER_WR_DIRSTEERHASH_V(f->fs.dirsteerhash) |
+ FW_FILTER_WR_LPBK_V(f->fs.action == FILTER_SWITCH) |
+ FW_FILTER_WR_DMAC_V(f->fs.newdmac) |
+ FW_FILTER_WR_SMAC_V(f->fs.newsmac) |
+ FW_FILTER_WR_INSVLAN_V(f->fs.newvlan == VLAN_INSERT ||
+ f->fs.newvlan == VLAN_REWRITE) |
+ FW_FILTER_WR_RMVLAN_V(f->fs.newvlan == VLAN_REMOVE ||
+ f->fs.newvlan == VLAN_REWRITE) |
+ FW_FILTER_WR_HITCNTS_V(f->fs.hitcnts) |
+ FW_FILTER_WR_TXCHAN_V(f->fs.eport) |
+ FW_FILTER_WR_PRIO_V(f->fs.prio) |
+ FW_FILTER_WR_L2TIX_V(f->l2t ? f->l2t->idx : 0));
+ fwr->ethtype = htons(f->fs.val.ethtype);
+ fwr->ethtypem = htons(f->fs.mask.ethtype);
+ fwr->frag_to_ovlan_vldm =
+ (FW_FILTER_WR_FRAG_V(f->fs.val.frag) |
+ FW_FILTER_WR_FRAGM_V(f->fs.mask.frag) |
+ FW_FILTER_WR_IVLAN_VLD_V(f->fs.val.ivlan_vld) |
+ FW_FILTER_WR_OVLAN_VLD_V(f->fs.val.ovlan_vld) |
+ FW_FILTER_WR_IVLAN_VLDM_V(f->fs.mask.ivlan_vld) |
+ FW_FILTER_WR_OVLAN_VLDM_V(f->fs.mask.ovlan_vld));
+ fwr->smac_sel = 0;
+ fwr->rx_chan_rx_rpl_iq =
+ htons(FW_FILTER_WR_RX_CHAN_V(0) |
+ FW_FILTER_WR_RX_RPL_IQ_V(adapter->sge.fw_evtq.abs_id));
+ fwr->maci_to_matchtypem =
+ htonl(FW_FILTER_WR_MACI_V(f->fs.val.macidx) |
+ FW_FILTER_WR_MACIM_V(f->fs.mask.macidx) |
+ FW_FILTER_WR_FCOE_V(f->fs.val.fcoe) |
+ FW_FILTER_WR_FCOEM_V(f->fs.mask.fcoe) |
+ FW_FILTER_WR_PORT_V(f->fs.val.iport) |
+ FW_FILTER_WR_PORTM_V(f->fs.mask.iport) |
+ FW_FILTER_WR_MATCHTYPE_V(f->fs.val.matchtype) |
+ FW_FILTER_WR_MATCHTYPEM_V(f->fs.mask.matchtype));
+ fwr->ptcl = f->fs.val.proto;
+ fwr->ptclm = f->fs.mask.proto;
+ fwr->ttyp = f->fs.val.tos;
+ fwr->ttypm = f->fs.mask.tos;
+ fwr->ivlan = htons(f->fs.val.ivlan);
+ fwr->ivlanm = htons(f->fs.mask.ivlan);
+ fwr->ovlan = htons(f->fs.val.ovlan);
+ fwr->ovlanm = htons(f->fs.mask.ovlan);
+ memcpy(fwr->lip, f->fs.val.lip, sizeof(fwr->lip));
+ memcpy(fwr->lipm, f->fs.mask.lip, sizeof(fwr->lipm));
+ memcpy(fwr->fip, f->fs.val.fip, sizeof(fwr->fip));
+ memcpy(fwr->fipm, f->fs.mask.fip, sizeof(fwr->fipm));
+ fwr->lp = htons(f->fs.val.lport);
+ fwr->lpm = htons(f->fs.mask.lport);
+ fwr->fp = htons(f->fs.val.fport);
+ fwr->fpm = htons(f->fs.mask.fport);
+ if (f->fs.newsmac)
+ memcpy(fwr->sma, f->fs.smac, sizeof(fwr->sma));
+
+ /* Mark the filter as "pending" and ship off the Filter Work Request.
+ * When we get the Work Request Reply we'll clear the pending status.
+ */
+ f->pending = 1;
+ set_wr_txq(skb, CPL_PRIORITY_CONTROL, f->fs.val.iport & 0x3);
+ t4_ofld_send(adapter, skb);
+ return 0;
+}
+
+/* Delete the filter at a specified index.
+ */
+static int del_filter_wr(struct adapter *adapter, int fidx)
+{
+ struct filter_entry *f = &adapter->tids.ftid_tab[fidx];
+ struct sk_buff *skb;
+ struct fw_filter_wr *fwr;
+ unsigned int len, ftid;
+
+ len = sizeof(*fwr);
+ ftid = adapter->tids.ftid_base + fidx;
+
+ skb = alloc_skb(len, GFP_KERNEL);
+ if (!skb)
+ return -ENOMEM;
+
+ fwr = (struct fw_filter_wr *)__skb_put(skb, len);
+ t4_mk_filtdelwr(ftid, fwr, adapter->sge.fw_evtq.abs_id);
+
+ /* Mark the filter as "pending" and ship off the Filter Work Request.
+ * When we get the Work Request Reply we'll clear the pending status.
+ */
+ f->pending = 1;
+ t4_mgmt_tx(adapter, skb);
+ return 0;
+}
+
+static u16 cxgb_select_queue(struct net_device *dev, struct sk_buff *skb,
+ void *accel_priv, select_queue_fallback_t fallback)
+{
+ int txq;
+
+#ifdef CONFIG_CHELSIO_T4_DCB
+ /* If a Data Center Bridging has been successfully negotiated on this
+ * link then we'll use the skb's priority to map it to a TX Queue.
+ * The skb's priority is determined via the VLAN Tag Priority Code
+ * Point field.
+ */
+ if (cxgb4_dcb_enabled(dev)) {
+ u16 vlan_tci;
+ int err;
+
+ err = vlan_get_tag(skb, &vlan_tci);
+ if (unlikely(err)) {
+ if (net_ratelimit())
+ netdev_warn(dev,
+ "TX Packet without VLAN Tag on DCB Link\n");
+ txq = 0;
+ } else {
+ txq = (vlan_tci & VLAN_PRIO_MASK) >> VLAN_PRIO_SHIFT;
+#ifdef CONFIG_CHELSIO_T4_FCOE
+ if (skb->protocol == htons(ETH_P_FCOE))
+ txq = skb->priority & 0x7;
+#endif /* CONFIG_CHELSIO_T4_FCOE */
+ }
+ return txq;
+ }
+#endif /* CONFIG_CHELSIO_T4_DCB */
+
+ if (select_queue) {
+ txq = (skb_rx_queue_recorded(skb)
+ ? skb_get_rx_queue(skb)
+ : smp_processor_id());
+
+ while (unlikely(txq >= dev->real_num_tx_queues))
+ txq -= dev->real_num_tx_queues;
+
+ return txq;
+ }
+
+ return fallback(dev, skb) % dev->real_num_tx_queues;
+}
+
+static inline int is_offload(const struct adapter *adap)
+{
+ return adap->params.offload;
+}
+
+static int closest_timer(const struct sge *s, int time)
+{
+ int i, delta, match = 0, min_delta = INT_MAX;
+
+ for (i = 0; i < ARRAY_SIZE(s->timer_val); i++) {
+ delta = time - s->timer_val[i];
+ if (delta < 0)
+ delta = -delta;
+ if (delta < min_delta) {
+ min_delta = delta;
+ match = i;
+ }
+ }
+ return match;
+}
+
+static int closest_thres(const struct sge *s, int thres)
+{
+ int i, delta, match = 0, min_delta = INT_MAX;
+
+ for (i = 0; i < ARRAY_SIZE(s->counter_val); i++) {
+ delta = thres - s->counter_val[i];
+ if (delta < 0)
+ delta = -delta;
+ if (delta < min_delta) {
+ min_delta = delta;
+ match = i;
+ }
+ }
+ return match;
+}
+
+/**
+ * cxgb4_set_rspq_intr_params - set a queue's interrupt holdoff parameters
+ * @q: the Rx queue
+ * @us: the hold-off time in us, or 0 to disable timer
+ * @cnt: the hold-off packet count, or 0 to disable counter
+ *
+ * Sets an Rx queue's interrupt hold-off time and packet count. At least
+ * one of the two needs to be enabled for the queue to generate interrupts.
+ */
+int cxgb4_set_rspq_intr_params(struct sge_rspq *q,
+ unsigned int us, unsigned int cnt)
+{
+ struct adapter *adap = q->adap;
+
+ if ((us | cnt) == 0)
+ cnt = 1;
+
+ if (cnt) {
+ int err;
+ u32 v, new_idx;
+
+ new_idx = closest_thres(&adap->sge, cnt);
+ if (q->desc && q->pktcnt_idx != new_idx) {
+ /* the queue has already been created, update it */
+ v = FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DMAQ) |
+ FW_PARAMS_PARAM_X_V(
+ FW_PARAMS_PARAM_DMAQ_IQ_INTCNTTHRESH) |
+ FW_PARAMS_PARAM_YZ_V(q->cntxt_id);
+ err = t4_set_params(adap, adap->fn, adap->fn, 0, 1, &v,
+ &new_idx);
+ if (err)
+ return err;
+ }
+ q->pktcnt_idx = new_idx;
+ }
+
+ us = us == 0 ? 6 : closest_timer(&adap->sge, us);
+ q->intr_params = QINTR_TIMER_IDX(us) | (cnt > 0 ? QINTR_CNT_EN : 0);
+ return 0;
+}
+
+static int cxgb_set_features(struct net_device *dev, netdev_features_t features)
+{
+ const struct port_info *pi = netdev_priv(dev);
+ netdev_features_t changed = dev->features ^ features;
+ int err;
+
+ if (!(changed & NETIF_F_HW_VLAN_CTAG_RX))
+ return 0;
+
+ err = t4_set_rxmode(pi->adapter, pi->adapter->fn, pi->viid, -1,
+ -1, -1, -1,
+ !!(features & NETIF_F_HW_VLAN_CTAG_RX), true);
+ if (unlikely(err))
+ dev->features = features ^ NETIF_F_HW_VLAN_CTAG_RX;
+ return err;
+}
+
+static int setup_debugfs(struct adapter *adap)
+{
+ if (IS_ERR_OR_NULL(adap->debugfs_root))
+ return -1;
+
+#ifdef CONFIG_DEBUG_FS
+ t4_setup_debugfs(adap);
+#endif
+ return 0;
+}
+
+/*
+ * upper-layer driver support
+ */
+
+/*
+ * Allocate an active-open TID and set it to the supplied value.
+ */
+int cxgb4_alloc_atid(struct tid_info *t, void *data)
+{
+ int atid = -1;
+
+ spin_lock_bh(&t->atid_lock);
+ if (t->afree) {
+ union aopen_entry *p = t->afree;
+
+ atid = (p - t->atid_tab) + t->atid_base;
+ t->afree = p->next;
+ p->data = data;
+ t->atids_in_use++;
+ }
+ spin_unlock_bh(&t->atid_lock);
+ return atid;
+}
+EXPORT_SYMBOL(cxgb4_alloc_atid);
+
+/*
+ * Release an active-open TID.
+ */
+void cxgb4_free_atid(struct tid_info *t, unsigned int atid)
+{
+ union aopen_entry *p = &t->atid_tab[atid - t->atid_base];
+
+ spin_lock_bh(&t->atid_lock);
+ p->next = t->afree;
+ t->afree = p;
+ t->atids_in_use--;
+ spin_unlock_bh(&t->atid_lock);
+}
+EXPORT_SYMBOL(cxgb4_free_atid);
+
+/*
+ * Allocate a server TID and set it to the supplied value.
+ */
+int cxgb4_alloc_stid(struct tid_info *t, int family, void *data)
+{
+ int stid;
+
+ spin_lock_bh(&t->stid_lock);
+ if (family == PF_INET) {
+ stid = find_first_zero_bit(t->stid_bmap, t->nstids);
+ if (stid < t->nstids)
+ __set_bit(stid, t->stid_bmap);
+ else
+ stid = -1;
+ } else {
+ stid = bitmap_find_free_region(t->stid_bmap, t->nstids, 2);
+ if (stid < 0)
+ stid = -1;
+ }
+ if (stid >= 0) {
+ t->stid_tab[stid].data = data;
+ stid += t->stid_base;
+ /* IPv6 requires max of 520 bits or 16 cells in TCAM
+ * This is equivalent to 4 TIDs. With CLIP enabled it
+ * needs 2 TIDs.
+ */
+ if (family == PF_INET)
+ t->stids_in_use++;
+ else
+ t->stids_in_use += 4;
+ }
+ spin_unlock_bh(&t->stid_lock);
+ return stid;
+}
+EXPORT_SYMBOL(cxgb4_alloc_stid);
+
+/* Allocate a server filter TID and set it to the supplied value.
+ */
+int cxgb4_alloc_sftid(struct tid_info *t, int family, void *data)
+{
+ int stid;
+
+ spin_lock_bh(&t->stid_lock);
+ if (family == PF_INET) {
+ stid = find_next_zero_bit(t->stid_bmap,
+ t->nstids + t->nsftids, t->nstids);
+ if (stid < (t->nstids + t->nsftids))
+ __set_bit(stid, t->stid_bmap);
+ else
+ stid = -1;
+ } else {
+ stid = -1;
+ }
+ if (stid >= 0) {
+ t->stid_tab[stid].data = data;
+ stid -= t->nstids;
+ stid += t->sftid_base;
+ t->stids_in_use++;
+ }
+ spin_unlock_bh(&t->stid_lock);
+ return stid;
+}
+EXPORT_SYMBOL(cxgb4_alloc_sftid);
+
+/* Release a server TID.
+ */
+void cxgb4_free_stid(struct tid_info *t, unsigned int stid, int family)
+{
+ /* Is it a server filter TID? */
+ if (t->nsftids && (stid >= t->sftid_base)) {
+ stid -= t->sftid_base;
+ stid += t->nstids;
+ } else {
+ stid -= t->stid_base;
+ }
+
+ spin_lock_bh(&t->stid_lock);
+ if (family == PF_INET)
+ __clear_bit(stid, t->stid_bmap);
+ else
+ bitmap_release_region(t->stid_bmap, stid, 2);
+ t->stid_tab[stid].data = NULL;
+ if (family == PF_INET)
+ t->stids_in_use--;
+ else
+ t->stids_in_use -= 4;
+ spin_unlock_bh(&t->stid_lock);
+}
+EXPORT_SYMBOL(cxgb4_free_stid);
+
+/*
+ * Populate a TID_RELEASE WR. Caller must properly size the skb.
+ */
+static void mk_tid_release(struct sk_buff *skb, unsigned int chan,
+ unsigned int tid)
+{
+ struct cpl_tid_release *req;
+
+ set_wr_txq(skb, CPL_PRIORITY_SETUP, chan);
+ req = (struct cpl_tid_release *)__skb_put(skb, sizeof(*req));
+ INIT_TP_WR(req, tid);
+ OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_TID_RELEASE, tid));
+}
+
+/*
+ * Queue a TID release request and if necessary schedule a work queue to
+ * process it.
+ */
+static void cxgb4_queue_tid_release(struct tid_info *t, unsigned int chan,
+ unsigned int tid)
+{
+ void **p = &t->tid_tab[tid];
+ struct adapter *adap = container_of(t, struct adapter, tids);
+
+ spin_lock_bh(&adap->tid_release_lock);
+ *p = adap->tid_release_head;
+ /* Low 2 bits encode the Tx channel number */
+ adap->tid_release_head = (void **)((uintptr_t)p | chan);
+ if (!adap->tid_release_task_busy) {
+ adap->tid_release_task_busy = true;
+ queue_work(adap->workq, &adap->tid_release_task);
+ }
+ spin_unlock_bh(&adap->tid_release_lock);
+}
+
+/*
+ * Process the list of pending TID release requests.
+ */
+static void process_tid_release_list(struct work_struct *work)
+{
+ struct sk_buff *skb;
+ struct adapter *adap;
+
+ adap = container_of(work, struct adapter, tid_release_task);
+
+ spin_lock_bh(&adap->tid_release_lock);
+ while (adap->tid_release_head) {
+ void **p = adap->tid_release_head;
+ unsigned int chan = (uintptr_t)p & 3;
+ p = (void *)p - chan;
+
+ adap->tid_release_head = *p;
+ *p = NULL;
+ spin_unlock_bh(&adap->tid_release_lock);
+
+ while (!(skb = alloc_skb(sizeof(struct cpl_tid_release),
+ GFP_KERNEL)))
+ schedule_timeout_uninterruptible(1);
+
+ mk_tid_release(skb, chan, p - adap->tids.tid_tab);
+ t4_ofld_send(adap, skb);
+ spin_lock_bh(&adap->tid_release_lock);
+ }
+ adap->tid_release_task_busy = false;
+ spin_unlock_bh(&adap->tid_release_lock);
+}
+
+/*
+ * Release a TID and inform HW. If we are unable to allocate the release
+ * message we defer to a work queue.
+ */
+void cxgb4_remove_tid(struct tid_info *t, unsigned int chan, unsigned int tid)
+{
+ void *old;
+ struct sk_buff *skb;
+ struct adapter *adap = container_of(t, struct adapter, tids);
+
+ old = t->tid_tab[tid];
+ skb = alloc_skb(sizeof(struct cpl_tid_release), GFP_ATOMIC);
+ if (likely(skb)) {
+ t->tid_tab[tid] = NULL;
+ mk_tid_release(skb, chan, tid);
+ t4_ofld_send(adap, skb);
+ } else
+ cxgb4_queue_tid_release(t, chan, tid);
+ if (old)
+ atomic_dec(&t->tids_in_use);
+}
+EXPORT_SYMBOL(cxgb4_remove_tid);
+
+/*
+ * Allocate and initialize the TID tables. Returns 0 on success.
+ */
+static int tid_init(struct tid_info *t)
+{
+ size_t size;
+ unsigned int stid_bmap_size;
+ unsigned int natids = t->natids;
+ struct adapter *adap = container_of(t, struct adapter, tids);
+
+ stid_bmap_size = BITS_TO_LONGS(t->nstids + t->nsftids);
+ size = t->ntids * sizeof(*t->tid_tab) +
+ natids * sizeof(*t->atid_tab) +
+ t->nstids * sizeof(*t->stid_tab) +
+ t->nsftids * sizeof(*t->stid_tab) +
+ stid_bmap_size * sizeof(long) +
+ t->nftids * sizeof(*t->ftid_tab) +
+ t->nsftids * sizeof(*t->ftid_tab);
+
+ t->tid_tab = t4_alloc_mem(size);
+ if (!t->tid_tab)
+ return -ENOMEM;
+
+ t->atid_tab = (union aopen_entry *)&t->tid_tab[t->ntids];
+ t->stid_tab = (struct serv_entry *)&t->atid_tab[natids];
+ t->stid_bmap = (unsigned long *)&t->stid_tab[t->nstids + t->nsftids];
+ t->ftid_tab = (struct filter_entry *)&t->stid_bmap[stid_bmap_size];
+ spin_lock_init(&t->stid_lock);
+ spin_lock_init(&t->atid_lock);
+
+ t->stids_in_use = 0;
+ t->afree = NULL;
+ t->atids_in_use = 0;
+ atomic_set(&t->tids_in_use, 0);
+
+ /* Setup the free list for atid_tab and clear the stid bitmap. */
+ if (natids) {
+ while (--natids)
+ t->atid_tab[natids - 1].next = &t->atid_tab[natids];
+ t->afree = t->atid_tab;
+ }
+ bitmap_zero(t->stid_bmap, t->nstids + t->nsftids);
+ /* Reserve stid 0 for T4/T5 adapters */
+ if (!t->stid_base &&
+ (is_t4(adap->params.chip) || is_t5(adap->params.chip)))
+ __set_bit(0, t->stid_bmap);
+
+ return 0;
+}
+
+/**
+ * cxgb4_create_server - create an IP server
+ * @dev: the device
+ * @stid: the server TID
+ * @sip: local IP address to bind server to
+ * @sport: the server's TCP port
+ * @queue: queue to direct messages from this server to
+ *
+ * Create an IP server for the given port and address.
+ * Returns <0 on error and one of the %NET_XMIT_* values on success.
+ */
+int cxgb4_create_server(const struct net_device *dev, unsigned int stid,
+ __be32 sip, __be16 sport, __be16 vlan,
+ unsigned int queue)
+{
+ unsigned int chan;
+ struct sk_buff *skb;
+ struct adapter *adap;
+ struct cpl_pass_open_req *req;
+ int ret;
+
+ skb = alloc_skb(sizeof(*req), GFP_KERNEL);
+ if (!skb)
+ return -ENOMEM;
+
+ adap = netdev2adap(dev);
+ req = (struct cpl_pass_open_req *)__skb_put(skb, sizeof(*req));
+ INIT_TP_WR(req, 0);
+ OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_PASS_OPEN_REQ, stid));
+ req->local_port = sport;
+ req->peer_port = htons(0);
+ req->local_ip = sip;
+ req->peer_ip = htonl(0);
+ chan = rxq_to_chan(&adap->sge, queue);
+ req->opt0 = cpu_to_be64(TX_CHAN_V(chan));
+ req->opt1 = cpu_to_be64(CONN_POLICY_V(CPL_CONN_POLICY_ASK) |
+ SYN_RSS_ENABLE_F | SYN_RSS_QUEUE_V(queue));
+ ret = t4_mgmt_tx(adap, skb);
+ return net_xmit_eval(ret);
+}
+EXPORT_SYMBOL(cxgb4_create_server);
+
+/* cxgb4_create_server6 - create an IPv6 server
+ * @dev: the device
+ * @stid: the server TID
+ * @sip: local IPv6 address to bind server to
+ * @sport: the server's TCP port
+ * @queue: queue to direct messages from this server to
+ *
+ * Create an IPv6 server for the given port and address.
+ * Returns <0 on error and one of the %NET_XMIT_* values on success.
+ */
+int cxgb4_create_server6(const struct net_device *dev, unsigned int stid,
+ const struct in6_addr *sip, __be16 sport,
+ unsigned int queue)
+{
+ unsigned int chan;
+ struct sk_buff *skb;
+ struct adapter *adap;
+ struct cpl_pass_open_req6 *req;
+ int ret;
+
+ skb = alloc_skb(sizeof(*req), GFP_KERNEL);
+ if (!skb)
+ return -ENOMEM;
+
+ adap = netdev2adap(dev);
+ req = (struct cpl_pass_open_req6 *)__skb_put(skb, sizeof(*req));
+ INIT_TP_WR(req, 0);
+ OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_PASS_OPEN_REQ6, stid));
+ req->local_port = sport;
+ req->peer_port = htons(0);
+ req->local_ip_hi = *(__be64 *)(sip->s6_addr);
+ req->local_ip_lo = *(__be64 *)(sip->s6_addr + 8);
+ req->peer_ip_hi = cpu_to_be64(0);
+ req->peer_ip_lo = cpu_to_be64(0);
+ chan = rxq_to_chan(&adap->sge, queue);
+ req->opt0 = cpu_to_be64(TX_CHAN_V(chan));
+ req->opt1 = cpu_to_be64(CONN_POLICY_V(CPL_CONN_POLICY_ASK) |
+ SYN_RSS_ENABLE_F | SYN_RSS_QUEUE_V(queue));
+ ret = t4_mgmt_tx(adap, skb);
+ return net_xmit_eval(ret);
+}
+EXPORT_SYMBOL(cxgb4_create_server6);
+
+int cxgb4_remove_server(const struct net_device *dev, unsigned int stid,
+ unsigned int queue, bool ipv6)
+{
+ struct sk_buff *skb;
+ struct adapter *adap;
+ struct cpl_close_listsvr_req *req;
+ int ret;
+
+ adap = netdev2adap(dev);
+
+ skb = alloc_skb(sizeof(*req), GFP_KERNEL);
+ if (!skb)
+ return -ENOMEM;
+
+ req = (struct cpl_close_listsvr_req *)__skb_put(skb, sizeof(*req));
+ INIT_TP_WR(req, 0);
+ OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_CLOSE_LISTSRV_REQ, stid));
+ req->reply_ctrl = htons(NO_REPLY_V(0) | (ipv6 ? LISTSVR_IPV6_V(1) :
+ LISTSVR_IPV6_V(0)) | QUEUENO_V(queue));
+ ret = t4_mgmt_tx(adap, skb);
+ return net_xmit_eval(ret);
+}
+EXPORT_SYMBOL(cxgb4_remove_server);
+
+/**
+ * cxgb4_best_mtu - find the entry in the MTU table closest to an MTU
+ * @mtus: the HW MTU table
+ * @mtu: the target MTU
+ * @idx: index of selected entry in the MTU table
+ *
+ * Returns the index and the value in the HW MTU table that is closest to
+ * but does not exceed @mtu, unless @mtu is smaller than any value in the
+ * table, in which case that smallest available value is selected.
+ */
+unsigned int cxgb4_best_mtu(const unsigned short *mtus, unsigned short mtu,
+ unsigned int *idx)
+{
+ unsigned int i = 0;
+
+ while (i < NMTUS - 1 && mtus[i + 1] <= mtu)
+ ++i;
+ if (idx)
+ *idx = i;
+ return mtus[i];
+}
+EXPORT_SYMBOL(cxgb4_best_mtu);
+
+/**
+ * cxgb4_best_aligned_mtu - find best MTU, [hopefully] data size aligned
+ * @mtus: the HW MTU table
+ * @header_size: Header Size
+ * @data_size_max: maximum Data Segment Size
+ * @data_size_align: desired Data Segment Size Alignment (2^N)
+ * @mtu_idxp: HW MTU Table Index return value pointer (possibly NULL)
+ *
+ * Similar to cxgb4_best_mtu() but instead of searching the Hardware
+ * MTU Table based solely on a Maximum MTU parameter, we break that
+ * parameter up into a Header Size and Maximum Data Segment Size, and
+ * provide a desired Data Segment Size Alignment. If we find an MTU in
+ * the Hardware MTU Table which will result in a Data Segment Size with
+ * the requested alignment _and_ that MTU isn't "too far" from the
+ * closest MTU, then we'll return that rather than the closest MTU.
+ */
+unsigned int cxgb4_best_aligned_mtu(const unsigned short *mtus,
+ unsigned short header_size,
+ unsigned short data_size_max,
+ unsigned short data_size_align,
+ unsigned int *mtu_idxp)
+{
+ unsigned short max_mtu = header_size + data_size_max;
+ unsigned short data_size_align_mask = data_size_align - 1;
+ int mtu_idx, aligned_mtu_idx;
+
+ /* Scan the MTU Table till we find an MTU which is larger than our
+ * Maximum MTU or we reach the end of the table. Along the way,
+ * record the last MTU found, if any, which will result in a Data
+ * Segment Length matching the requested alignment.
+ */
+ for (mtu_idx = 0, aligned_mtu_idx = -1; mtu_idx < NMTUS; mtu_idx++) {
+ unsigned short data_size = mtus[mtu_idx] - header_size;
+
+ /* If this MTU minus the Header Size would result in a
+ * Data Segment Size of the desired alignment, remember it.
+ */
+ if ((data_size & data_size_align_mask) == 0)
+ aligned_mtu_idx = mtu_idx;
+
+ /* If we're not at the end of the Hardware MTU Table and the
+ * next element is larger than our Maximum MTU, drop out of
+ * the loop.
+ */
+ if (mtu_idx+1 < NMTUS && mtus[mtu_idx+1] > max_mtu)
+ break;
+ }
+
+ /* If we fell out of the loop because we ran to the end of the table,
+ * then we just have to use the last [largest] entry.
+ */
+ if (mtu_idx == NMTUS)
+ mtu_idx--;
+
+ /* If we found an MTU which resulted in the requested Data Segment
+ * Length alignment and that's "not far" from the largest MTU which is
+ * less than or equal to the maximum MTU, then use that.
+ */
+ if (aligned_mtu_idx >= 0 &&
+ mtu_idx - aligned_mtu_idx <= 1)
+ mtu_idx = aligned_mtu_idx;
+
+ /* If the caller has passed in an MTU Index pointer, pass the
+ * MTU Index back. Return the MTU value.
+ */
+ if (mtu_idxp)
+ *mtu_idxp = mtu_idx;
+ return mtus[mtu_idx];
+}
+EXPORT_SYMBOL(cxgb4_best_aligned_mtu);
+
+/**
+ * cxgb4_port_chan - get the HW channel of a port
+ * @dev: the net device for the port
+ *
+ * Return the HW Tx channel of the given port.
+ */
+unsigned int cxgb4_port_chan(const struct net_device *dev)
+{
+ return netdev2pinfo(dev)->tx_chan;
+}
+EXPORT_SYMBOL(cxgb4_port_chan);
+
+unsigned int cxgb4_dbfifo_count(const struct net_device *dev, int lpfifo)
+{
+ struct adapter *adap = netdev2adap(dev);
+ u32 v1, v2, lp_count, hp_count;
+
+ v1 = t4_read_reg(adap, SGE_DBFIFO_STATUS_A);
+ v2 = t4_read_reg(adap, SGE_DBFIFO_STATUS2_A);
+ if (is_t4(adap->params.chip)) {
+ lp_count = LP_COUNT_G(v1);
+ hp_count = HP_COUNT_G(v1);
+ } else {
+ lp_count = LP_COUNT_T5_G(v1);
+ hp_count = HP_COUNT_T5_G(v2);
+ }
+ return lpfifo ? lp_count : hp_count;
+}
+EXPORT_SYMBOL(cxgb4_dbfifo_count);
+
+/**
+ * cxgb4_port_viid - get the VI id of a port
+ * @dev: the net device for the port
+ *
+ * Return the VI id of the given port.
+ */
+unsigned int cxgb4_port_viid(const struct net_device *dev)
+{
+ return netdev2pinfo(dev)->viid;
+}
+EXPORT_SYMBOL(cxgb4_port_viid);
+
+/**
+ * cxgb4_port_idx - get the index of a port
+ * @dev: the net device for the port
+ *
+ * Return the index of the given port.
+ */
+unsigned int cxgb4_port_idx(const struct net_device *dev)
+{
+ return netdev2pinfo(dev)->port_id;
+}
+EXPORT_SYMBOL(cxgb4_port_idx);
+
+void cxgb4_get_tcp_stats(struct pci_dev *pdev, struct tp_tcp_stats *v4,
+ struct tp_tcp_stats *v6)
+{
+ struct adapter *adap = pci_get_drvdata(pdev);
+
+ spin_lock(&adap->stats_lock);
+ t4_tp_get_tcp_stats(adap, v4, v6);
+ spin_unlock(&adap->stats_lock);
+}
+EXPORT_SYMBOL(cxgb4_get_tcp_stats);
+
+void cxgb4_iscsi_init(struct net_device *dev, unsigned int tag_mask,
+ const unsigned int *pgsz_order)
+{
+ struct adapter *adap = netdev2adap(dev);
+
+ t4_write_reg(adap, ULP_RX_ISCSI_TAGMASK_A, tag_mask);
+ t4_write_reg(adap, ULP_RX_ISCSI_PSZ_A, HPZ0_V(pgsz_order[0]) |
+ HPZ1_V(pgsz_order[1]) | HPZ2_V(pgsz_order[2]) |
+ HPZ3_V(pgsz_order[3]));
+}
+EXPORT_SYMBOL(cxgb4_iscsi_init);
+
+int cxgb4_flush_eq_cache(struct net_device *dev)
+{
+ struct adapter *adap = netdev2adap(dev);
+ int ret;
+
+ ret = t4_fwaddrspace_write(adap, adap->mbox,
+ 0xe1000000 + SGE_CTXT_CMD_A, 0x20000000);
+ return ret;
+}
+EXPORT_SYMBOL(cxgb4_flush_eq_cache);
+
+static int read_eq_indices(struct adapter *adap, u16 qid, u16 *pidx, u16 *cidx)
+{
+ u32 addr = t4_read_reg(adap, SGE_DBQ_CTXT_BADDR_A) + 24 * qid + 8;
+ __be64 indices;
+ int ret;
+
+ spin_lock(&adap->win0_lock);
+ ret = t4_memory_rw(adap, 0, MEM_EDC0, addr,
+ sizeof(indices), (__be32 *)&indices,
+ T4_MEMORY_READ);
+ spin_unlock(&adap->win0_lock);
+ if (!ret) {
+ *cidx = (be64_to_cpu(indices) >> 25) & 0xffff;
+ *pidx = (be64_to_cpu(indices) >> 9) & 0xffff;
+ }
+ return ret;
+}
+
+int cxgb4_sync_txq_pidx(struct net_device *dev, u16 qid, u16 pidx,
+ u16 size)
+{
+ struct adapter *adap = netdev2adap(dev);
+ u16 hw_pidx, hw_cidx;
+ int ret;
+
+ ret = read_eq_indices(adap, qid, &hw_pidx, &hw_cidx);
+ if (ret)
+ goto out;
+
+ if (pidx != hw_pidx) {
+ u16 delta;
+ u32 val;
+
+ if (pidx >= hw_pidx)
+ delta = pidx - hw_pidx;
+ else
+ delta = size - hw_pidx + pidx;
+
+ if (is_t4(adap->params.chip))
+ val = PIDX_V(delta);
+ else
+ val = PIDX_T5_V(delta);
+ wmb();
+ t4_write_reg(adap, MYPF_REG(SGE_PF_KDOORBELL_A),
+ QID_V(qid) | val);
+ }
+out:
+ return ret;
+}
+EXPORT_SYMBOL(cxgb4_sync_txq_pidx);
+
+void cxgb4_disable_db_coalescing(struct net_device *dev)
+{
+ struct adapter *adap;
+
+ adap = netdev2adap(dev);
+ t4_set_reg_field(adap, SGE_DOORBELL_CONTROL_A, NOCOALESCE_F,
+ NOCOALESCE_F);
+}
+EXPORT_SYMBOL(cxgb4_disable_db_coalescing);
+
+void cxgb4_enable_db_coalescing(struct net_device *dev)
+{
+ struct adapter *adap;
+
+ adap = netdev2adap(dev);
+ t4_set_reg_field(adap, SGE_DOORBELL_CONTROL_A, NOCOALESCE_F, 0);
+}
+EXPORT_SYMBOL(cxgb4_enable_db_coalescing);
+
+int cxgb4_read_tpte(struct net_device *dev, u32 stag, __be32 *tpte)
+{
+ struct adapter *adap;
+ u32 offset, memtype, memaddr;
+ u32 edc0_size, edc1_size, mc0_size, mc1_size, size;
+ u32 edc0_end, edc1_end, mc0_end, mc1_end;
+ int ret;
+
+ adap = netdev2adap(dev);
+
+ offset = ((stag >> 8) * 32) + adap->vres.stag.start;
+
+ /* Figure out where the offset lands in the Memory Type/Address scheme.
+ * This code assumes that the memory is laid out starting at offset 0
+ * with no breaks as: EDC0, EDC1, MC0, MC1. All cards have both EDC0
+ * and EDC1. Some cards will have neither MC0 nor MC1, most cards have
+ * MC0, and some have both MC0 and MC1.
+ */
+ size = t4_read_reg(adap, MA_EDRAM0_BAR_A);
+ edc0_size = EDRAM0_SIZE_G(size) << 20;
+ size = t4_read_reg(adap, MA_EDRAM1_BAR_A);
+ edc1_size = EDRAM1_SIZE_G(size) << 20;
+ size = t4_read_reg(adap, MA_EXT_MEMORY0_BAR_A);
+ mc0_size = EXT_MEM0_SIZE_G(size) << 20;
+
+ edc0_end = edc0_size;
+ edc1_end = edc0_end + edc1_size;
+ mc0_end = edc1_end + mc0_size;
+
+ if (offset < edc0_end) {
+ memtype = MEM_EDC0;
+ memaddr = offset;
+ } else if (offset < edc1_end) {
+ memtype = MEM_EDC1;
+ memaddr = offset - edc0_end;
+ } else {
+ if (offset < mc0_end) {
+ memtype = MEM_MC0;
+ memaddr = offset - edc1_end;
+ } else if (is_t4(adap->params.chip)) {
+ /* T4 only has a single memory channel */
+ goto err;
+ } else {
+ size = t4_read_reg(adap, MA_EXT_MEMORY1_BAR_A);
+ mc1_size = EXT_MEM1_SIZE_G(size) << 20;
+ mc1_end = mc0_end + mc1_size;
+ if (offset < mc1_end) {
+ memtype = MEM_MC1;
+ memaddr = offset - mc0_end;
+ } else {
+ /* offset beyond the end of any memory */
+ goto err;
+ }
+ }
+ }
+
+ spin_lock(&adap->win0_lock);
+ ret = t4_memory_rw(adap, 0, memtype, memaddr, 32, tpte, T4_MEMORY_READ);
+ spin_unlock(&adap->win0_lock);
+ return ret;
+
+err:
+ dev_err(adap->pdev_dev, "stag %#x, offset %#x out of range\n",
+ stag, offset);
+ return -EINVAL;
+}
+EXPORT_SYMBOL(cxgb4_read_tpte);
+
+u64 cxgb4_read_sge_timestamp(struct net_device *dev)
+{
+ u32 hi, lo;
+ struct adapter *adap;
+
+ adap = netdev2adap(dev);
+ lo = t4_read_reg(adap, SGE_TIMESTAMP_LO_A);
+ hi = TSVAL_G(t4_read_reg(adap, SGE_TIMESTAMP_HI_A));
+
+ return ((u64)hi << 32) | (u64)lo;
+}
+EXPORT_SYMBOL(cxgb4_read_sge_timestamp);
+
+int cxgb4_bar2_sge_qregs(struct net_device *dev,
+ unsigned int qid,
+ enum cxgb4_bar2_qtype qtype,
+ u64 *pbar2_qoffset,
+ unsigned int *pbar2_qid)
+{
+ return cxgb4_t4_bar2_sge_qregs(netdev2adap(dev),
+ qid,
+ (qtype == CXGB4_BAR2_QTYPE_EGRESS
+ ? T4_BAR2_QTYPE_EGRESS
+ : T4_BAR2_QTYPE_INGRESS),
+ pbar2_qoffset,
+ pbar2_qid);
+}
+EXPORT_SYMBOL(cxgb4_bar2_sge_qregs);
+
+static struct pci_driver cxgb4_driver;
+
+static void check_neigh_update(struct neighbour *neigh)
+{
+ const struct device *parent;
+ const struct net_device *netdev = neigh->dev;
+
+ if (netdev->priv_flags & IFF_802_1Q_VLAN)
+ netdev = vlan_dev_real_dev(netdev);
+ parent = netdev->dev.parent;
+ if (parent && parent->driver == &cxgb4_driver.driver)
+ t4_l2t_update(dev_get_drvdata(parent), neigh);
+}
+
+static int netevent_cb(struct notifier_block *nb, unsigned long event,
+ void *data)
+{
+ switch (event) {
+ case NETEVENT_NEIGH_UPDATE:
+ check_neigh_update(data);
+ break;
+ case NETEVENT_REDIRECT:
+ default:
+ break;
+ }
+ return 0;
+}
+
+static bool netevent_registered;
+static struct notifier_block cxgb4_netevent_nb = {
+ .notifier_call = netevent_cb
+};
+
+static void drain_db_fifo(struct adapter *adap, int usecs)
+{
+ u32 v1, v2, lp_count, hp_count;
+
+ do {
+ v1 = t4_read_reg(adap, SGE_DBFIFO_STATUS_A);
+ v2 = t4_read_reg(adap, SGE_DBFIFO_STATUS2_A);
+ if (is_t4(adap->params.chip)) {
+ lp_count = LP_COUNT_G(v1);
+ hp_count = HP_COUNT_G(v1);
+ } else {
+ lp_count = LP_COUNT_T5_G(v1);
+ hp_count = HP_COUNT_T5_G(v2);
+ }
+
+ if (lp_count == 0 && hp_count == 0)
+ break;
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(usecs_to_jiffies(usecs));
+ } while (1);
+}
+
+static void disable_txq_db(struct sge_txq *q)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&q->db_lock, flags);
+ q->db_disabled = 1;
+ spin_unlock_irqrestore(&q->db_lock, flags);
+}
+
+static void enable_txq_db(struct adapter *adap, struct sge_txq *q)
+{
+ spin_lock_irq(&q->db_lock);
+ if (q->db_pidx_inc) {
+ /* Make sure that all writes to the TX descriptors
+ * are committed before we tell HW about them.
+ */
+ wmb();
+ t4_write_reg(adap, MYPF_REG(SGE_PF_KDOORBELL_A),
+ QID_V(q->cntxt_id) | PIDX_V(q->db_pidx_inc));
+ q->db_pidx_inc = 0;
+ }
+ q->db_disabled = 0;
+ spin_unlock_irq(&q->db_lock);
+}
+
+static void disable_dbs(struct adapter *adap)
+{
+ int i;
+
+ for_each_ethrxq(&adap->sge, i)
+ disable_txq_db(&adap->sge.ethtxq[i].q);
+ for_each_ofldrxq(&adap->sge, i)
+ disable_txq_db(&adap->sge.ofldtxq[i].q);
+ for_each_port(adap, i)
+ disable_txq_db(&adap->sge.ctrlq[i].q);
+}
+
+static void enable_dbs(struct adapter *adap)
+{
+ int i;
+
+ for_each_ethrxq(&adap->sge, i)
+ enable_txq_db(adap, &adap->sge.ethtxq[i].q);
+ for_each_ofldrxq(&adap->sge, i)
+ enable_txq_db(adap, &adap->sge.ofldtxq[i].q);
+ for_each_port(adap, i)
+ enable_txq_db(adap, &adap->sge.ctrlq[i].q);
+}
+
+static void notify_rdma_uld(struct adapter *adap, enum cxgb4_control cmd)
+{
+ if (adap->uld_handle[CXGB4_ULD_RDMA])
+ ulds[CXGB4_ULD_RDMA].control(adap->uld_handle[CXGB4_ULD_RDMA],
+ cmd);
+}
+
+static void process_db_full(struct work_struct *work)
+{
+ struct adapter *adap;
+
+ adap = container_of(work, struct adapter, db_full_task);
+
+ drain_db_fifo(adap, dbfifo_drain_delay);
+ enable_dbs(adap);
+ notify_rdma_uld(adap, CXGB4_CONTROL_DB_EMPTY);
+ t4_set_reg_field(adap, SGE_INT_ENABLE3_A,
+ DBFIFO_HP_INT_F | DBFIFO_LP_INT_F,
+ DBFIFO_HP_INT_F | DBFIFO_LP_INT_F);
+}
+
+static void sync_txq_pidx(struct adapter *adap, struct sge_txq *q)
+{
+ u16 hw_pidx, hw_cidx;
+ int ret;
+
+ spin_lock_irq(&q->db_lock);
+ ret = read_eq_indices(adap, (u16)q->cntxt_id, &hw_pidx, &hw_cidx);
+ if (ret)
+ goto out;
+ if (q->db_pidx != hw_pidx) {
+ u16 delta;
+ u32 val;
+
+ if (q->db_pidx >= hw_pidx)
+ delta = q->db_pidx - hw_pidx;
+ else
+ delta = q->size - hw_pidx + q->db_pidx;
+
+ if (is_t4(adap->params.chip))
+ val = PIDX_V(delta);
+ else
+ val = PIDX_T5_V(delta);
+ wmb();
+ t4_write_reg(adap, MYPF_REG(SGE_PF_KDOORBELL_A),
+ QID_V(q->cntxt_id) | val);
+ }
+out:
+ q->db_disabled = 0;
+ q->db_pidx_inc = 0;
+ spin_unlock_irq(&q->db_lock);
+ if (ret)
+ CH_WARN(adap, "DB drop recovery failed.\n");
+}
+static void recover_all_queues(struct adapter *adap)
+{
+ int i;
+
+ for_each_ethrxq(&adap->sge, i)
+ sync_txq_pidx(adap, &adap->sge.ethtxq[i].q);
+ for_each_ofldrxq(&adap->sge, i)
+ sync_txq_pidx(adap, &adap->sge.ofldtxq[i].q);
+ for_each_port(adap, i)
+ sync_txq_pidx(adap, &adap->sge.ctrlq[i].q);
+}
+
+static void process_db_drop(struct work_struct *work)
+{
+ struct adapter *adap;
+
+ adap = container_of(work, struct adapter, db_drop_task);
+
+ if (is_t4(adap->params.chip)) {
+ drain_db_fifo(adap, dbfifo_drain_delay);
+ notify_rdma_uld(adap, CXGB4_CONTROL_DB_DROP);
+ drain_db_fifo(adap, dbfifo_drain_delay);
+ recover_all_queues(adap);
+ drain_db_fifo(adap, dbfifo_drain_delay);
+ enable_dbs(adap);
+ notify_rdma_uld(adap, CXGB4_CONTROL_DB_EMPTY);
+ } else {
+ u32 dropped_db = t4_read_reg(adap, 0x010ac);
+ u16 qid = (dropped_db >> 15) & 0x1ffff;
+ u16 pidx_inc = dropped_db & 0x1fff;
+ u64 bar2_qoffset;
+ unsigned int bar2_qid;
+ int ret;
+
+ ret = cxgb4_t4_bar2_sge_qregs(adap, qid, T4_BAR2_QTYPE_EGRESS,
+ &bar2_qoffset, &bar2_qid);
+ if (ret)
+ dev_err(adap->pdev_dev, "doorbell drop recovery: "
+ "qid=%d, pidx_inc=%d\n", qid, pidx_inc);
+ else
+ writel(PIDX_T5_V(pidx_inc) | QID_V(bar2_qid),
+ adap->bar2 + bar2_qoffset + SGE_UDB_KDOORBELL);
+
+ /* Re-enable BAR2 WC */
+ t4_set_reg_field(adap, 0x10b0, 1<<15, 1<<15);
+ }
+
+ t4_set_reg_field(adap, SGE_DOORBELL_CONTROL_A, DROPPED_DB_F, 0);
+}
+
+void t4_db_full(struct adapter *adap)
+{
+ if (is_t4(adap->params.chip)) {
+ disable_dbs(adap);
+ notify_rdma_uld(adap, CXGB4_CONTROL_DB_FULL);
+ t4_set_reg_field(adap, SGE_INT_ENABLE3_A,
+ DBFIFO_HP_INT_F | DBFIFO_LP_INT_F, 0);
+ queue_work(adap->workq, &adap->db_full_task);
+ }
+}
+
+void t4_db_dropped(struct adapter *adap)
+{
+ if (is_t4(adap->params.chip)) {
+ disable_dbs(adap);
+ notify_rdma_uld(adap, CXGB4_CONTROL_DB_FULL);
+ }
+ queue_work(adap->workq, &adap->db_drop_task);
+}
+
+static void uld_attach(struct adapter *adap, unsigned int uld)
+{
+ void *handle;
+ struct cxgb4_lld_info lli;
+ unsigned short i;
+
+ lli.pdev = adap->pdev;
+ lli.pf = adap->fn;
+ lli.l2t = adap->l2t;
+ lli.tids = &adap->tids;
+ lli.ports = adap->port;
+ lli.vr = &adap->vres;
+ lli.mtus = adap->params.mtus;
+ if (uld == CXGB4_ULD_RDMA) {
+ lli.rxq_ids = adap->sge.rdma_rxq;
+ lli.ciq_ids = adap->sge.rdma_ciq;
+ lli.nrxq = adap->sge.rdmaqs;
+ lli.nciq = adap->sge.rdmaciqs;
+ } else if (uld == CXGB4_ULD_ISCSI) {
+ lli.rxq_ids = adap->sge.ofld_rxq;
+ lli.nrxq = adap->sge.ofldqsets;
+ }
+ lli.ntxq = adap->sge.ofldqsets;
+ lli.nchan = adap->params.nports;
+ lli.nports = adap->params.nports;
+ lli.wr_cred = adap->params.ofldq_wr_cred;
+ lli.adapter_type = adap->params.chip;
+ lli.iscsi_iolen = MAXRXDATA_G(t4_read_reg(adap, TP_PARA_REG2_A));
+ lli.cclk_ps = 1000000000 / adap->params.vpd.cclk;
+ lli.udb_density = 1 << adap->params.sge.eq_qpp;
+ lli.ucq_density = 1 << adap->params.sge.iq_qpp;
+ lli.filt_mode = adap->params.tp.vlan_pri_map;
+ /* MODQ_REQ_MAP sets queues 0-3 to chan 0-3 */
+ for (i = 0; i < NCHAN; i++)
+ lli.tx_modq[i] = i;
+ lli.gts_reg = adap->regs + MYPF_REG(SGE_PF_GTS_A);
+ lli.db_reg = adap->regs + MYPF_REG(SGE_PF_KDOORBELL_A);
+ lli.fw_vers = adap->params.fw_vers;
+ lli.dbfifo_int_thresh = dbfifo_int_thresh;
+ lli.sge_ingpadboundary = adap->sge.fl_align;
+ lli.sge_egrstatuspagesize = adap->sge.stat_len;
+ lli.sge_pktshift = adap->sge.pktshift;
+ lli.enable_fw_ofld_conn = adap->flags & FW_OFLD_CONN;
+ lli.max_ordird_qp = adap->params.max_ordird_qp;
+ lli.max_ird_adapter = adap->params.max_ird_adapter;
+ lli.ulptx_memwrite_dsgl = adap->params.ulptx_memwrite_dsgl;
+
+ handle = ulds[uld].add(&lli);
+ if (IS_ERR(handle)) {
+ dev_warn(adap->pdev_dev,
+ "could not attach to the %s driver, error %ld\n",
+ uld_str[uld], PTR_ERR(handle));
+ return;
+ }
+
+ adap->uld_handle[uld] = handle;
+
+ if (!netevent_registered) {
+ register_netevent_notifier(&cxgb4_netevent_nb);
+ netevent_registered = true;
+ }
+
+ if (adap->flags & FULL_INIT_DONE)
+ ulds[uld].state_change(handle, CXGB4_STATE_UP);
+}
+
+static void attach_ulds(struct adapter *adap)
+{
+ unsigned int i;
+
+ spin_lock(&adap_rcu_lock);
+ list_add_tail_rcu(&adap->rcu_node, &adap_rcu_list);
+ spin_unlock(&adap_rcu_lock);
+
+ mutex_lock(&uld_mutex);
+ list_add_tail(&adap->list_node, &adapter_list);
+ for (i = 0; i < CXGB4_ULD_MAX; i++)
+ if (ulds[i].add)
+ uld_attach(adap, i);
+ mutex_unlock(&uld_mutex);
+}
+
+static void detach_ulds(struct adapter *adap)
+{
+ unsigned int i;
+
+ mutex_lock(&uld_mutex);
+ list_del(&adap->list_node);
+ for (i = 0; i < CXGB4_ULD_MAX; i++)
+ if (adap->uld_handle[i]) {
+ ulds[i].state_change(adap->uld_handle[i],
+ CXGB4_STATE_DETACH);
+ adap->uld_handle[i] = NULL;
+ }
+ if (netevent_registered && list_empty(&adapter_list)) {
+ unregister_netevent_notifier(&cxgb4_netevent_nb);
+ netevent_registered = false;
+ }
+ mutex_unlock(&uld_mutex);
+
+ spin_lock(&adap_rcu_lock);
+ list_del_rcu(&adap->rcu_node);
+ spin_unlock(&adap_rcu_lock);
+}
+
+static void notify_ulds(struct adapter *adap, enum cxgb4_state new_state)
+{
+ unsigned int i;
+
+ mutex_lock(&uld_mutex);
+ for (i = 0; i < CXGB4_ULD_MAX; i++)
+ if (adap->uld_handle[i])
+ ulds[i].state_change(adap->uld_handle[i], new_state);
+ mutex_unlock(&uld_mutex);
+}
+
+/**
+ * cxgb4_register_uld - register an upper-layer driver
+ * @type: the ULD type
+ * @p: the ULD methods
+ *
+ * Registers an upper-layer driver with this driver and notifies the ULD
+ * about any presently available devices that support its type. Returns
+ * %-EBUSY if a ULD of the same type is already registered.
+ */
+int cxgb4_register_uld(enum cxgb4_uld type, const struct cxgb4_uld_info *p)
+{
+ int ret = 0;
+ struct adapter *adap;
+
+ if (type >= CXGB4_ULD_MAX)
+ return -EINVAL;
+ mutex_lock(&uld_mutex);
+ if (ulds[type].add) {
+ ret = -EBUSY;
+ goto out;
+ }
+ ulds[type] = *p;
+ list_for_each_entry(adap, &adapter_list, list_node)
+ uld_attach(adap, type);
+out: mutex_unlock(&uld_mutex);
+ return ret;
+}
+EXPORT_SYMBOL(cxgb4_register_uld);
+
+/**
+ * cxgb4_unregister_uld - unregister an upper-layer driver
+ * @type: the ULD type
+ *
+ * Unregisters an existing upper-layer driver.
+ */
+int cxgb4_unregister_uld(enum cxgb4_uld type)
+{
+ struct adapter *adap;
+
+ if (type >= CXGB4_ULD_MAX)
+ return -EINVAL;
+ mutex_lock(&uld_mutex);
+ list_for_each_entry(adap, &adapter_list, list_node)
+ adap->uld_handle[type] = NULL;
+ ulds[type].add = NULL;
+ mutex_unlock(&uld_mutex);
+ return 0;
+}
+EXPORT_SYMBOL(cxgb4_unregister_uld);
+
+#if IS_ENABLED(CONFIG_IPV6)
+static int cxgb4_inet6addr_handler(struct notifier_block *this,
+ unsigned long event, void *data)
+{
+ struct inet6_ifaddr *ifa = data;
+ struct net_device *event_dev = ifa->idev->dev;
+ const struct device *parent = NULL;
+#if IS_ENABLED(CONFIG_BONDING)
+ struct adapter *adap;
+#endif
+ if (event_dev->priv_flags & IFF_802_1Q_VLAN)
+ event_dev = vlan_dev_real_dev(event_dev);
+#if IS_ENABLED(CONFIG_BONDING)
+ if (event_dev->flags & IFF_MASTER) {
+ list_for_each_entry(adap, &adapter_list, list_node) {
+ switch (event) {
+ case NETDEV_UP:
+ cxgb4_clip_get(adap->port[0],
+ (const u32 *)ifa, 1);
+ break;
+ case NETDEV_DOWN:
+ cxgb4_clip_release(adap->port[0],
+ (const u32 *)ifa, 1);
+ break;
+ default:
+ break;
+ }
+ }
+ return NOTIFY_OK;
+ }
+#endif
+
+ if (event_dev)
+ parent = event_dev->dev.parent;
+
+ if (parent && parent->driver == &cxgb4_driver.driver) {
+ switch (event) {
+ case NETDEV_UP:
+ cxgb4_clip_get(event_dev, (const u32 *)ifa, 1);
+ break;
+ case NETDEV_DOWN:
+ cxgb4_clip_release(event_dev, (const u32 *)ifa, 1);
+ break;
+ default:
+ break;
+ }
+ }
+ return NOTIFY_OK;
+}
+
+static bool inet6addr_registered;
+static struct notifier_block cxgb4_inet6addr_notifier = {
+ .notifier_call = cxgb4_inet6addr_handler
+};
+
+static void update_clip(const struct adapter *adap)
+{
+ int i;
+ struct net_device *dev;
+ int ret;
+
+ rcu_read_lock();
+
+ for (i = 0; i < MAX_NPORTS; i++) {
+ dev = adap->port[i];
+ ret = 0;
+
+ if (dev)
+ ret = cxgb4_update_root_dev_clip(dev);
+
+ if (ret < 0)
+ break;
+ }
+ rcu_read_unlock();
+}
+#endif /* IS_ENABLED(CONFIG_IPV6) */
+
+/**
+ * cxgb_up - enable the adapter
+ * @adap: adapter being enabled
+ *
+ * Called when the first port is enabled, this function performs the
+ * actions necessary to make an adapter operational, such as completing
+ * the initialization of HW modules, and enabling interrupts.
+ *
+ * Must be called with the rtnl lock held.
+ */
+static int cxgb_up(struct adapter *adap)
+{
+ int err;
+
+ err = setup_sge_queues(adap);
+ if (err)
+ goto out;
+ err = setup_rss(adap);
+ if (err)
+ goto freeq;
+
+ if (adap->flags & USING_MSIX) {
+ name_msix_vecs(adap);
+ err = request_irq(adap->msix_info[0].vec, t4_nondata_intr, 0,
+ adap->msix_info[0].desc, adap);
+ if (err)
+ goto irq_err;
+
+ err = request_msix_queue_irqs(adap);
+ if (err) {
+ free_irq(adap->msix_info[0].vec, adap);
+ goto irq_err;
+ }
+ } else {
+ err = request_irq(adap->pdev->irq, t4_intr_handler(adap),
+ (adap->flags & USING_MSI) ? 0 : IRQF_SHARED,
+ adap->port[0]->name, adap);
+ if (err)
+ goto irq_err;
+ }
+ enable_rx(adap);
+ t4_sge_start(adap);
+ t4_intr_enable(adap);
+ adap->flags |= FULL_INIT_DONE;
+ notify_ulds(adap, CXGB4_STATE_UP);
+#if IS_ENABLED(CONFIG_IPV6)
+ update_clip(adap);
+#endif
+ out:
+ return err;
+ irq_err:
+ dev_err(adap->pdev_dev, "request_irq failed, err %d\n", err);
+ freeq:
+ t4_free_sge_resources(adap);
+ goto out;
+}
+
+static void cxgb_down(struct adapter *adapter)
+{
+ cancel_work_sync(&adapter->tid_release_task);
+ cancel_work_sync(&adapter->db_full_task);
+ cancel_work_sync(&adapter->db_drop_task);
+ adapter->tid_release_task_busy = false;
+ adapter->tid_release_head = NULL;
+
+ t4_sge_stop(adapter);
+ t4_free_sge_resources(adapter);
+ adapter->flags &= ~FULL_INIT_DONE;
+}
+
+/*
+ * net_device operations
+ */
+static int cxgb_open(struct net_device *dev)
+{
+ int err;
+ struct port_info *pi = netdev_priv(dev);
+ struct adapter *adapter = pi->adapter;
+
+ netif_carrier_off(dev);
+
+ if (!(adapter->flags & FULL_INIT_DONE)) {
+ err = cxgb_up(adapter);
+ if (err < 0)
+ return err;
+ }
+
+ err = link_start(dev);
+ if (!err)
+ netif_tx_start_all_queues(dev);
+ return err;
+}
+
+static int cxgb_close(struct net_device *dev)
+{
+ struct port_info *pi = netdev_priv(dev);
+ struct adapter *adapter = pi->adapter;
+
+ netif_tx_stop_all_queues(dev);
+ netif_carrier_off(dev);
+ return t4_enable_vi(adapter, adapter->fn, pi->viid, false, false);
+}
+
+/* Return an error number if the indicated filter isn't writable ...
+ */
+static int writable_filter(struct filter_entry *f)
+{
+ if (f->locked)
+ return -EPERM;
+ if (f->pending)
+ return -EBUSY;
+
+ return 0;
+}
+
+/* Delete the filter at the specified index (if valid). The checks for all
+ * the common problems with doing this like the filter being locked, currently
+ * pending in another operation, etc.
+ */
+static int delete_filter(struct adapter *adapter, unsigned int fidx)
+{
+ struct filter_entry *f;
+ int ret;
+
+ if (fidx >= adapter->tids.nftids + adapter->tids.nsftids)
+ return -EINVAL;
+
+ f = &adapter->tids.ftid_tab[fidx];
+ ret = writable_filter(f);
+ if (ret)
+ return ret;
+ if (f->valid)
+ return del_filter_wr(adapter, fidx);
+
+ return 0;
+}
+
+int cxgb4_create_server_filter(const struct net_device *dev, unsigned int stid,
+ __be32 sip, __be16 sport, __be16 vlan,
+ unsigned int queue, unsigned char port, unsigned char mask)
+{
+ int ret;
+ struct filter_entry *f;
+ struct adapter *adap;
+ int i;
+ u8 *val;
+
+ adap = netdev2adap(dev);
+
+ /* Adjust stid to correct filter index */
+ stid -= adap->tids.sftid_base;
+ stid += adap->tids.nftids;
+
+ /* Check to make sure the filter requested is writable ...
+ */
+ f = &adap->tids.ftid_tab[stid];
+ ret = writable_filter(f);
+ if (ret)
+ return ret;
+
+ /* Clear out any old resources being used by the filter before
+ * we start constructing the new filter.
+ */
+ if (f->valid)
+ clear_filter(adap, f);
+
+ /* Clear out filter specifications */
+ memset(&f->fs, 0, sizeof(struct ch_filter_specification));
+ f->fs.val.lport = cpu_to_be16(sport);
+ f->fs.mask.lport = ~0;
+ val = (u8 *)&sip;
+ if ((val[0] | val[1] | val[2] | val[3]) != 0) {
+ for (i = 0; i < 4; i++) {
+ f->fs.val.lip[i] = val[i];
+ f->fs.mask.lip[i] = ~0;
+ }
+ if (adap->params.tp.vlan_pri_map & PORT_F) {
+ f->fs.val.iport = port;
+ f->fs.mask.iport = mask;
+ }
+ }
+
+ if (adap->params.tp.vlan_pri_map & PROTOCOL_F) {
+ f->fs.val.proto = IPPROTO_TCP;
+ f->fs.mask.proto = ~0;
+ }
+
+ f->fs.dirsteer = 1;
+ f->fs.iq = queue;
+ /* Mark filter as locked */
+ f->locked = 1;
+ f->fs.rpttid = 1;
+
+ ret = set_filter_wr(adap, stid);
+ if (ret) {
+ clear_filter(adap, f);
+ return ret;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(cxgb4_create_server_filter);
+
+int cxgb4_remove_server_filter(const struct net_device *dev, unsigned int stid,
+ unsigned int queue, bool ipv6)
+{
+ int ret;
+ struct filter_entry *f;
+ struct adapter *adap;
+
+ adap = netdev2adap(dev);
+
+ /* Adjust stid to correct filter index */
+ stid -= adap->tids.sftid_base;
+ stid += adap->tids.nftids;
+
+ f = &adap->tids.ftid_tab[stid];
+ /* Unlock the filter */
+ f->locked = 0;
+
+ ret = delete_filter(adap, stid);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+EXPORT_SYMBOL(cxgb4_remove_server_filter);
+
+static struct rtnl_link_stats64 *cxgb_get_stats(struct net_device *dev,
+ struct rtnl_link_stats64 *ns)
+{
+ struct port_stats stats;
+ struct port_info *p = netdev_priv(dev);
+ struct adapter *adapter = p->adapter;
+
+ /* Block retrieving statistics during EEH error
+ * recovery. Otherwise, the recovery might fail
+ * and the PCI device will be removed permanently
+ */
+ spin_lock(&adapter->stats_lock);
+ if (!netif_device_present(dev)) {
+ spin_unlock(&adapter->stats_lock);
+ return ns;
+ }
+ t4_get_port_stats(adapter, p->tx_chan, &stats);
+ spin_unlock(&adapter->stats_lock);
+
+ ns->tx_bytes = stats.tx_octets;
+ ns->tx_packets = stats.tx_frames;
+ ns->rx_bytes = stats.rx_octets;
+ ns->rx_packets = stats.rx_frames;
+ ns->multicast = stats.rx_mcast_frames;
+
+ /* detailed rx_errors */
+ ns->rx_length_errors = stats.rx_jabber + stats.rx_too_long +
+ stats.rx_runt;
+ ns->rx_over_errors = 0;
+ ns->rx_crc_errors = stats.rx_fcs_err;
+ ns->rx_frame_errors = stats.rx_symbol_err;
+ ns->rx_fifo_errors = stats.rx_ovflow0 + stats.rx_ovflow1 +
+ stats.rx_ovflow2 + stats.rx_ovflow3 +
+ stats.rx_trunc0 + stats.rx_trunc1 +
+ stats.rx_trunc2 + stats.rx_trunc3;
+ ns->rx_missed_errors = 0;
+
+ /* detailed tx_errors */
+ ns->tx_aborted_errors = 0;
+ ns->tx_carrier_errors = 0;
+ ns->tx_fifo_errors = 0;
+ ns->tx_heartbeat_errors = 0;
+ ns->tx_window_errors = 0;
+
+ ns->tx_errors = stats.tx_error_frames;
+ ns->rx_errors = stats.rx_symbol_err + stats.rx_fcs_err +
+ ns->rx_length_errors + stats.rx_len_err + ns->rx_fifo_errors;
+ return ns;
+}
+
+static int cxgb_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
+{
+ unsigned int mbox;
+ int ret = 0, prtad, devad;
+ struct port_info *pi = netdev_priv(dev);
+ struct mii_ioctl_data *data = (struct mii_ioctl_data *)&req->ifr_data;
+
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ if (pi->mdio_addr < 0)
+ return -EOPNOTSUPP;
+ data->phy_id = pi->mdio_addr;
+ break;
+ case SIOCGMIIREG:
+ case SIOCSMIIREG:
+ if (mdio_phy_id_is_c45(data->phy_id)) {
+ prtad = mdio_phy_id_prtad(data->phy_id);
+ devad = mdio_phy_id_devad(data->phy_id);
+ } else if (data->phy_id < 32) {
+ prtad = data->phy_id;
+ devad = 0;
+ data->reg_num &= 0x1f;
+ } else
+ return -EINVAL;
+
+ mbox = pi->adapter->fn;
+ if (cmd == SIOCGMIIREG)
+ ret = t4_mdio_rd(pi->adapter, mbox, prtad, devad,
+ data->reg_num, &data->val_out);
+ else
+ ret = t4_mdio_wr(pi->adapter, mbox, prtad, devad,
+ data->reg_num, data->val_in);
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+ return ret;
+}
+
+static void cxgb_set_rxmode(struct net_device *dev)
+{
+ /* unfortunately we can't return errors to the stack */
+ set_rxmode(dev, -1, false);
+}
+
+static int cxgb_change_mtu(struct net_device *dev, int new_mtu)
+{
+ int ret;
+ struct port_info *pi = netdev_priv(dev);
+
+ if (new_mtu < 81 || new_mtu > MAX_MTU) /* accommodate SACK */
+ return -EINVAL;
+ ret = t4_set_rxmode(pi->adapter, pi->adapter->fn, pi->viid, new_mtu, -1,
+ -1, -1, -1, true);
+ if (!ret)
+ dev->mtu = new_mtu;
+ return ret;
+}
+
+static int cxgb_set_mac_addr(struct net_device *dev, void *p)
+{
+ int ret;
+ struct sockaddr *addr = p;
+ struct port_info *pi = netdev_priv(dev);
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ ret = t4_change_mac(pi->adapter, pi->adapter->fn, pi->viid,
+ pi->xact_addr_filt, addr->sa_data, true, true);
+ if (ret < 0)
+ return ret;
+
+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+ pi->xact_addr_filt = ret;
+ return 0;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void cxgb_netpoll(struct net_device *dev)
+{
+ struct port_info *pi = netdev_priv(dev);
+ struct adapter *adap = pi->adapter;
+
+ if (adap->flags & USING_MSIX) {
+ int i;
+ struct sge_eth_rxq *rx = &adap->sge.ethrxq[pi->first_qset];
+
+ for (i = pi->nqsets; i; i--, rx++)
+ t4_sge_intr_msix(0, &rx->rspq);
+ } else
+ t4_intr_handler(adap)(0, adap);
+}
+#endif
+
+static const struct net_device_ops cxgb4_netdev_ops = {
+ .ndo_open = cxgb_open,
+ .ndo_stop = cxgb_close,
+ .ndo_start_xmit = t4_eth_xmit,
+ .ndo_select_queue = cxgb_select_queue,
+ .ndo_get_stats64 = cxgb_get_stats,
+ .ndo_set_rx_mode = cxgb_set_rxmode,
+ .ndo_set_mac_address = cxgb_set_mac_addr,
+ .ndo_set_features = cxgb_set_features,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_do_ioctl = cxgb_ioctl,
+ .ndo_change_mtu = cxgb_change_mtu,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = cxgb_netpoll,
+#endif
+#ifdef CONFIG_CHELSIO_T4_FCOE
+ .ndo_fcoe_enable = cxgb_fcoe_enable,
+ .ndo_fcoe_disable = cxgb_fcoe_disable,
+#endif /* CONFIG_CHELSIO_T4_FCOE */
+#ifdef CONFIG_NET_RX_BUSY_POLL
+ .ndo_busy_poll = cxgb_busy_poll,
+#endif
+
+};
+
+void t4_fatal_err(struct adapter *adap)
+{
+ t4_set_reg_field(adap, SGE_CONTROL_A, GLOBALENABLE_F, 0);
+ t4_intr_disable(adap);
+ dev_alert(adap->pdev_dev, "encountered fatal error, adapter stopped\n");
+}
+
+/* Return the specified PCI-E Configuration Space register from our Physical
+ * Function. We try first via a Firmware LDST Command since we prefer to let
+ * the firmware own all of these registers, but if that fails we go for it
+ * directly ourselves.
+ */
+static u32 t4_read_pcie_cfg4(struct adapter *adap, int reg)
+{
+ struct fw_ldst_cmd ldst_cmd;
+ u32 val;
+ int ret;
+
+ /* Construct and send the Firmware LDST Command to retrieve the
+ * specified PCI-E Configuration Space register.
+ */
+ memset(&ldst_cmd, 0, sizeof(ldst_cmd));
+ ldst_cmd.op_to_addrspace =
+ htonl(FW_CMD_OP_V(FW_LDST_CMD) |
+ FW_CMD_REQUEST_F |
+ FW_CMD_READ_F |
+ FW_LDST_CMD_ADDRSPACE_V(FW_LDST_ADDRSPC_FUNC_PCIE));
+ ldst_cmd.cycles_to_len16 = htonl(FW_LEN16(ldst_cmd));
+ ldst_cmd.u.pcie.select_naccess = FW_LDST_CMD_NACCESS_V(1);
+ ldst_cmd.u.pcie.ctrl_to_fn =
+ (FW_LDST_CMD_LC_F | FW_LDST_CMD_FN_V(adap->fn));
+ ldst_cmd.u.pcie.r = reg;
+ ret = t4_wr_mbox(adap, adap->mbox, &ldst_cmd, sizeof(ldst_cmd),
+ &ldst_cmd);
+
+ /* If the LDST Command suucceeded, exctract the returned register
+ * value. Otherwise read it directly ourself.
+ */
+ if (ret == 0)
+ val = ntohl(ldst_cmd.u.pcie.data[0]);
+ else
+ t4_hw_pci_read_cfg4(adap, reg, &val);
+
+ return val;
+}
+
+static void setup_memwin(struct adapter *adap)
+{
+ u32 mem_win0_base, mem_win1_base, mem_win2_base, mem_win2_aperture;
+
+ if (is_t4(adap->params.chip)) {
+ u32 bar0;
+
+ /* Truncation intentional: we only read the bottom 32-bits of
+ * the 64-bit BAR0/BAR1 ... We use the hardware backdoor
+ * mechanism to read BAR0 instead of using
+ * pci_resource_start() because we could be operating from
+ * within a Virtual Machine which is trapping our accesses to
+ * our Configuration Space and we need to set up the PCI-E
+ * Memory Window decoders with the actual addresses which will
+ * be coming across the PCI-E link.
+ */
+ bar0 = t4_read_pcie_cfg4(adap, PCI_BASE_ADDRESS_0);
+ bar0 &= PCI_BASE_ADDRESS_MEM_MASK;
+ adap->t4_bar0 = bar0;
+
+ mem_win0_base = bar0 + MEMWIN0_BASE;
+ mem_win1_base = bar0 + MEMWIN1_BASE;
+ mem_win2_base = bar0 + MEMWIN2_BASE;
+ mem_win2_aperture = MEMWIN2_APERTURE;
+ } else {
+ /* For T5, only relative offset inside the PCIe BAR is passed */
+ mem_win0_base = MEMWIN0_BASE;
+ mem_win1_base = MEMWIN1_BASE;
+ mem_win2_base = MEMWIN2_BASE_T5;
+ mem_win2_aperture = MEMWIN2_APERTURE_T5;
+ }
+ t4_write_reg(adap, PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN_A, 0),
+ mem_win0_base | BIR_V(0) |
+ WINDOW_V(ilog2(MEMWIN0_APERTURE) - 10));
+ t4_write_reg(adap, PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN_A, 1),
+ mem_win1_base | BIR_V(0) |
+ WINDOW_V(ilog2(MEMWIN1_APERTURE) - 10));
+ t4_write_reg(adap, PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN_A, 2),
+ mem_win2_base | BIR_V(0) |
+ WINDOW_V(ilog2(mem_win2_aperture) - 10));
+ t4_read_reg(adap, PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN_A, 2));
+}
+
+static void setup_memwin_rdma(struct adapter *adap)
+{
+ if (adap->vres.ocq.size) {
+ u32 start;
+ unsigned int sz_kb;
+
+ start = t4_read_pcie_cfg4(adap, PCI_BASE_ADDRESS_2);
+ start &= PCI_BASE_ADDRESS_MEM_MASK;
+ start += OCQ_WIN_OFFSET(adap->pdev, &adap->vres);
+ sz_kb = roundup_pow_of_two(adap->vres.ocq.size) >> 10;
+ t4_write_reg(adap,
+ PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN_A, 3),
+ start | BIR_V(1) | WINDOW_V(ilog2(sz_kb)));
+ t4_write_reg(adap,
+ PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_OFFSET_A, 3),
+ adap->vres.ocq.start);
+ t4_read_reg(adap,
+ PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_OFFSET_A, 3));
+ }
+}
+
+static int adap_init1(struct adapter *adap, struct fw_caps_config_cmd *c)
+{
+ u32 v;
+ int ret;
+
+ /* get device capabilities */
+ memset(c, 0, sizeof(*c));
+ c->op_to_write = htonl(FW_CMD_OP_V(FW_CAPS_CONFIG_CMD) |
+ FW_CMD_REQUEST_F | FW_CMD_READ_F);
+ c->cfvalid_to_len16 = htonl(FW_LEN16(*c));
+ ret = t4_wr_mbox(adap, adap->fn, c, sizeof(*c), c);
+ if (ret < 0)
+ return ret;
+
+ /* select capabilities we'll be using */
+ if (c->niccaps & htons(FW_CAPS_CONFIG_NIC_VM)) {
+ if (!vf_acls)
+ c->niccaps ^= htons(FW_CAPS_CONFIG_NIC_VM);
+ else
+ c->niccaps = htons(FW_CAPS_CONFIG_NIC_VM);
+ } else if (vf_acls) {
+ dev_err(adap->pdev_dev, "virtualization ACLs not supported");
+ return ret;
+ }
+ c->op_to_write = htonl(FW_CMD_OP_V(FW_CAPS_CONFIG_CMD) |
+ FW_CMD_REQUEST_F | FW_CMD_WRITE_F);
+ ret = t4_wr_mbox(adap, adap->fn, c, sizeof(*c), NULL);
+ if (ret < 0)
+ return ret;
+
+ ret = t4_config_glbl_rss(adap, adap->fn,
+ FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL,
+ FW_RSS_GLB_CONFIG_CMD_TNLMAPEN_F |
+ FW_RSS_GLB_CONFIG_CMD_TNLALLLKP_F);
+ if (ret < 0)
+ return ret;
+
+ ret = t4_cfg_pfvf(adap, adap->fn, adap->fn, 0, adap->sge.egr_sz, 64,
+ MAX_INGQ, 0, 0, 4, 0xf, 0xf, 16, FW_CMD_CAP_PF,
+ FW_CMD_CAP_PF);
+ if (ret < 0)
+ return ret;
+
+ t4_sge_init(adap);
+
+ /* tweak some settings */
+ t4_write_reg(adap, TP_SHIFT_CNT_A, 0x64f8849);
+ t4_write_reg(adap, ULP_RX_TDDP_PSZ_A, HPZ0_V(PAGE_SHIFT - 12));
+ t4_write_reg(adap, TP_PIO_ADDR_A, TP_INGRESS_CONFIG_A);
+ v = t4_read_reg(adap, TP_PIO_DATA_A);
+ t4_write_reg(adap, TP_PIO_DATA_A, v & ~CSUM_HAS_PSEUDO_HDR_F);
+
+ /* first 4 Tx modulation queues point to consecutive Tx channels */
+ adap->params.tp.tx_modq_map = 0xE4;
+ t4_write_reg(adap, TP_TX_MOD_QUEUE_REQ_MAP_A,
+ TX_MOD_QUEUE_REQ_MAP_V(adap->params.tp.tx_modq_map));
+
+ /* associate each Tx modulation queue with consecutive Tx channels */
+ v = 0x84218421;
+ t4_write_indirect(adap, TP_PIO_ADDR_A, TP_PIO_DATA_A,
+ &v, 1, TP_TX_SCHED_HDR_A);
+ t4_write_indirect(adap, TP_PIO_ADDR_A, TP_PIO_DATA_A,
+ &v, 1, TP_TX_SCHED_FIFO_A);
+ t4_write_indirect(adap, TP_PIO_ADDR_A, TP_PIO_DATA_A,
+ &v, 1, TP_TX_SCHED_PCMD_A);
+
+#define T4_TX_MODQ_10G_WEIGHT_DEFAULT 16 /* in KB units */
+ if (is_offload(adap)) {
+ t4_write_reg(adap, TP_TX_MOD_QUEUE_WEIGHT0_A,
+ TX_MODQ_WEIGHT0_V(T4_TX_MODQ_10G_WEIGHT_DEFAULT) |
+ TX_MODQ_WEIGHT1_V(T4_TX_MODQ_10G_WEIGHT_DEFAULT) |
+ TX_MODQ_WEIGHT2_V(T4_TX_MODQ_10G_WEIGHT_DEFAULT) |
+ TX_MODQ_WEIGHT3_V(T4_TX_MODQ_10G_WEIGHT_DEFAULT));
+ t4_write_reg(adap, TP_TX_MOD_CHANNEL_WEIGHT_A,
+ TX_MODQ_WEIGHT0_V(T4_TX_MODQ_10G_WEIGHT_DEFAULT) |
+ TX_MODQ_WEIGHT1_V(T4_TX_MODQ_10G_WEIGHT_DEFAULT) |
+ TX_MODQ_WEIGHT2_V(T4_TX_MODQ_10G_WEIGHT_DEFAULT) |
+ TX_MODQ_WEIGHT3_V(T4_TX_MODQ_10G_WEIGHT_DEFAULT));
+ }
+
+ /* get basic stuff going */
+ return t4_early_init(adap, adap->fn);
+}
+
+/*
+ * Max # of ATIDs. The absolute HW max is 16K but we keep it lower.
+ */
+#define MAX_ATIDS 8192U
+
+/*
+ * Phase 0 of initialization: contact FW, obtain config, perform basic init.
+ *
+ * If the firmware we're dealing with has Configuration File support, then
+ * we use that to perform all configuration
+ */
+
+/*
+ * Tweak configuration based on module parameters, etc. Most of these have
+ * defaults assigned to them by Firmware Configuration Files (if we're using
+ * them) but need to be explicitly set if we're using hard-coded
+ * initialization. But even in the case of using Firmware Configuration
+ * Files, we'd like to expose the ability to change these via module
+ * parameters so these are essentially common tweaks/settings for
+ * Configuration Files and hard-coded initialization ...
+ */
+static int adap_init0_tweaks(struct adapter *adapter)
+{
+ /*
+ * Fix up various Host-Dependent Parameters like Page Size, Cache
+ * Line Size, etc. The firmware default is for a 4KB Page Size and
+ * 64B Cache Line Size ...
+ */
+ t4_fixup_host_params(adapter, PAGE_SIZE, L1_CACHE_BYTES);
+
+ /*
+ * Process module parameters which affect early initialization.
+ */
+ if (rx_dma_offset != 2 && rx_dma_offset != 0) {
+ dev_err(&adapter->pdev->dev,
+ "Ignoring illegal rx_dma_offset=%d, using 2\n",
+ rx_dma_offset);
+ rx_dma_offset = 2;
+ }
+ t4_set_reg_field(adapter, SGE_CONTROL_A,
+ PKTSHIFT_V(PKTSHIFT_M),
+ PKTSHIFT_V(rx_dma_offset));
+
+ /*
+ * Don't include the "IP Pseudo Header" in CPL_RX_PKT checksums: Linux
+ * adds the pseudo header itself.
+ */
+ t4_tp_wr_bits_indirect(adapter, TP_INGRESS_CONFIG_A,
+ CSUM_HAS_PSEUDO_HDR_F, 0);
+
+ return 0;
+}
+
+/*
+ * Attempt to initialize the adapter via a Firmware Configuration File.
+ */
+static int adap_init0_config(struct adapter *adapter, int reset)
+{
+ struct fw_caps_config_cmd caps_cmd;
+ const struct firmware *cf;
+ unsigned long mtype = 0, maddr = 0;
+ u32 finiver, finicsum, cfcsum;
+ int ret;
+ int config_issued = 0;
+ char *fw_config_file, fw_config_file_path[256];
+ char *config_name = NULL;
+
+ /*
+ * Reset device if necessary.
+ */
+ if (reset) {
+ ret = t4_fw_reset(adapter, adapter->mbox,
+ PIORSTMODE_F | PIORST_F);
+ if (ret < 0)
+ goto bye;
+ }
+
+ /*
+ * If we have a T4 configuration file under /lib/firmware/cxgb4/,
+ * then use that. Otherwise, use the configuration file stored
+ * in the adapter flash ...
+ */
+ switch (CHELSIO_CHIP_VERSION(adapter->params.chip)) {
+ case CHELSIO_T4:
+ fw_config_file = FW4_CFNAME;
+ break;
+ case CHELSIO_T5:
+ fw_config_file = FW5_CFNAME;
+ break;
+ default:
+ dev_err(adapter->pdev_dev, "Device %d is not supported\n",
+ adapter->pdev->device);
+ ret = -EINVAL;
+ goto bye;
+ }
+
+ ret = request_firmware(&cf, fw_config_file, adapter->pdev_dev);
+ if (ret < 0) {
+ config_name = "On FLASH";
+ mtype = FW_MEMTYPE_CF_FLASH;
+ maddr = t4_flash_cfg_addr(adapter);
+ } else {
+ u32 params[7], val[7];
+
+ sprintf(fw_config_file_path,
+ "/lib/firmware/%s", fw_config_file);
+ config_name = fw_config_file_path;
+
+ if (cf->size >= FLASH_CFG_MAX_SIZE)
+ ret = -ENOMEM;
+ else {
+ params[0] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
+ FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_CF));
+ ret = t4_query_params(adapter, adapter->mbox,
+ adapter->fn, 0, 1, params, val);
+ if (ret == 0) {
+ /*
+ * For t4_memory_rw() below addresses and
+ * sizes have to be in terms of multiples of 4
+ * bytes. So, if the Configuration File isn't
+ * a multiple of 4 bytes in length we'll have
+ * to write that out separately since we can't
+ * guarantee that the bytes following the
+ * residual byte in the buffer returned by
+ * request_firmware() are zeroed out ...
+ */
+ size_t resid = cf->size & 0x3;
+ size_t size = cf->size & ~0x3;
+ __be32 *data = (__be32 *)cf->data;
+
+ mtype = FW_PARAMS_PARAM_Y_G(val[0]);
+ maddr = FW_PARAMS_PARAM_Z_G(val[0]) << 16;
+
+ spin_lock(&adapter->win0_lock);
+ ret = t4_memory_rw(adapter, 0, mtype, maddr,
+ size, data, T4_MEMORY_WRITE);
+ if (ret == 0 && resid != 0) {
+ union {
+ __be32 word;
+ char buf[4];
+ } last;
+ int i;
+
+ last.word = data[size >> 2];
+ for (i = resid; i < 4; i++)
+ last.buf[i] = 0;
+ ret = t4_memory_rw(adapter, 0, mtype,
+ maddr + size,
+ 4, &last.word,
+ T4_MEMORY_WRITE);
+ }
+ spin_unlock(&adapter->win0_lock);
+ }
+ }
+
+ release_firmware(cf);
+ if (ret)
+ goto bye;
+ }
+
+ /*
+ * Issue a Capability Configuration command to the firmware to get it
+ * to parse the Configuration File. We don't use t4_fw_config_file()
+ * because we want the ability to modify various features after we've
+ * processed the configuration file ...
+ */
+ memset(&caps_cmd, 0, sizeof(caps_cmd));
+ caps_cmd.op_to_write =
+ htonl(FW_CMD_OP_V(FW_CAPS_CONFIG_CMD) |
+ FW_CMD_REQUEST_F |
+ FW_CMD_READ_F);
+ caps_cmd.cfvalid_to_len16 =
+ htonl(FW_CAPS_CONFIG_CMD_CFVALID_F |
+ FW_CAPS_CONFIG_CMD_MEMTYPE_CF_V(mtype) |
+ FW_CAPS_CONFIG_CMD_MEMADDR64K_CF_V(maddr >> 16) |
+ FW_LEN16(caps_cmd));
+ ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd, sizeof(caps_cmd),
+ &caps_cmd);
+
+ /* If the CAPS_CONFIG failed with an ENOENT (for a Firmware
+ * Configuration File in FLASH), our last gasp effort is to use the
+ * Firmware Configuration File which is embedded in the firmware. A
+ * very few early versions of the firmware didn't have one embedded
+ * but we can ignore those.
+ */
+ if (ret == -ENOENT) {
+ memset(&caps_cmd, 0, sizeof(caps_cmd));
+ caps_cmd.op_to_write =
+ htonl(FW_CMD_OP_V(FW_CAPS_CONFIG_CMD) |
+ FW_CMD_REQUEST_F |
+ FW_CMD_READ_F);
+ caps_cmd.cfvalid_to_len16 = htonl(FW_LEN16(caps_cmd));
+ ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd,
+ sizeof(caps_cmd), &caps_cmd);
+ config_name = "Firmware Default";
+ }
+
+ config_issued = 1;
+ if (ret < 0)
+ goto bye;
+
+ finiver = ntohl(caps_cmd.finiver);
+ finicsum = ntohl(caps_cmd.finicsum);
+ cfcsum = ntohl(caps_cmd.cfcsum);
+ if (finicsum != cfcsum)
+ dev_warn(adapter->pdev_dev, "Configuration File checksum "\
+ "mismatch: [fini] csum=%#x, computed csum=%#x\n",
+ finicsum, cfcsum);
+
+ /*
+ * And now tell the firmware to use the configuration we just loaded.
+ */
+ caps_cmd.op_to_write =
+ htonl(FW_CMD_OP_V(FW_CAPS_CONFIG_CMD) |
+ FW_CMD_REQUEST_F |
+ FW_CMD_WRITE_F);
+ caps_cmd.cfvalid_to_len16 = htonl(FW_LEN16(caps_cmd));
+ ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd, sizeof(caps_cmd),
+ NULL);
+ if (ret < 0)
+ goto bye;
+
+ /*
+ * Tweak configuration based on system architecture, module
+ * parameters, etc.
+ */
+ ret = adap_init0_tweaks(adapter);
+ if (ret < 0)
+ goto bye;
+
+ /*
+ * And finally tell the firmware to initialize itself using the
+ * parameters from the Configuration File.
+ */
+ ret = t4_fw_initialize(adapter, adapter->mbox);
+ if (ret < 0)
+ goto bye;
+
+ /* Emit Firmware Configuration File information and return
+ * successfully.
+ */
+ dev_info(adapter->pdev_dev, "Successfully configured using Firmware "\
+ "Configuration File \"%s\", version %#x, computed checksum %#x\n",
+ config_name, finiver, cfcsum);
+ return 0;
+
+ /*
+ * Something bad happened. Return the error ... (If the "error"
+ * is that there's no Configuration File on the adapter we don't
+ * want to issue a warning since this is fairly common.)
+ */
+bye:
+ if (config_issued && ret != -ENOENT)
+ dev_warn(adapter->pdev_dev, "\"%s\" configuration file error %d\n",
+ config_name, -ret);
+ return ret;
+}
+
+static struct fw_info fw_info_array[] = {
+ {
+ .chip = CHELSIO_T4,
+ .fs_name = FW4_CFNAME,
+ .fw_mod_name = FW4_FNAME,
+ .fw_hdr = {
+ .chip = FW_HDR_CHIP_T4,
+ .fw_ver = __cpu_to_be32(FW_VERSION(T4)),
+ .intfver_nic = FW_INTFVER(T4, NIC),
+ .intfver_vnic = FW_INTFVER(T4, VNIC),
+ .intfver_ri = FW_INTFVER(T4, RI),
+ .intfver_iscsi = FW_INTFVER(T4, ISCSI),
+ .intfver_fcoe = FW_INTFVER(T4, FCOE),
+ },
+ }, {
+ .chip = CHELSIO_T5,
+ .fs_name = FW5_CFNAME,
+ .fw_mod_name = FW5_FNAME,
+ .fw_hdr = {
+ .chip = FW_HDR_CHIP_T5,
+ .fw_ver = __cpu_to_be32(FW_VERSION(T5)),
+ .intfver_nic = FW_INTFVER(T5, NIC),
+ .intfver_vnic = FW_INTFVER(T5, VNIC),
+ .intfver_ri = FW_INTFVER(T5, RI),
+ .intfver_iscsi = FW_INTFVER(T5, ISCSI),
+ .intfver_fcoe = FW_INTFVER(T5, FCOE),
+ },
+ }
+};
+
+static struct fw_info *find_fw_info(int chip)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(fw_info_array); i++) {
+ if (fw_info_array[i].chip == chip)
+ return &fw_info_array[i];
+ }
+ return NULL;
+}
+
+/*
+ * Phase 0 of initialization: contact FW, obtain config, perform basic init.
+ */
+static int adap_init0(struct adapter *adap)
+{
+ int ret;
+ u32 v, port_vec;
+ enum dev_state state;
+ u32 params[7], val[7];
+ struct fw_caps_config_cmd caps_cmd;
+ int reset = 1;
+
+ /* Grab Firmware Device Log parameters as early as possible so we have
+ * access to it for debugging, etc.
+ */
+ ret = t4_init_devlog_params(adap);
+ if (ret < 0)
+ return ret;
+
+ /* Contact FW, advertising Master capability */
+ ret = t4_fw_hello(adap, adap->mbox, adap->mbox, MASTER_MAY, &state);
+ if (ret < 0) {
+ dev_err(adap->pdev_dev, "could not connect to FW, error %d\n",
+ ret);
+ return ret;
+ }
+ if (ret == adap->mbox)
+ adap->flags |= MASTER_PF;
+
+ /*
+ * If we're the Master PF Driver and the device is uninitialized,
+ * then let's consider upgrading the firmware ... (We always want
+ * to check the firmware version number in order to A. get it for
+ * later reporting and B. to warn if the currently loaded firmware
+ * is excessively mismatched relative to the driver.)
+ */
+ t4_get_fw_version(adap, &adap->params.fw_vers);
+ t4_get_tp_version(adap, &adap->params.tp_vers);
+ if ((adap->flags & MASTER_PF) && state != DEV_STATE_INIT) {
+ struct fw_info *fw_info;
+ struct fw_hdr *card_fw;
+ const struct firmware *fw;
+ const u8 *fw_data = NULL;
+ unsigned int fw_size = 0;
+
+ /* This is the firmware whose headers the driver was compiled
+ * against
+ */
+ fw_info = find_fw_info(CHELSIO_CHIP_VERSION(adap->params.chip));
+ if (fw_info == NULL) {
+ dev_err(adap->pdev_dev,
+ "unable to get firmware info for chip %d.\n",
+ CHELSIO_CHIP_VERSION(adap->params.chip));
+ return -EINVAL;
+ }
+
+ /* allocate memory to read the header of the firmware on the
+ * card
+ */
+ card_fw = t4_alloc_mem(sizeof(*card_fw));
+
+ /* Get FW from from /lib/firmware/ */
+ ret = request_firmware(&fw, fw_info->fw_mod_name,
+ adap->pdev_dev);
+ if (ret < 0) {
+ dev_err(adap->pdev_dev,
+ "unable to load firmware image %s, error %d\n",
+ fw_info->fw_mod_name, ret);
+ } else {
+ fw_data = fw->data;
+ fw_size = fw->size;
+ }
+
+ /* upgrade FW logic */
+ ret = t4_prep_fw(adap, fw_info, fw_data, fw_size, card_fw,
+ state, &reset);
+
+ /* Cleaning up */
+ release_firmware(fw);
+ t4_free_mem(card_fw);
+
+ if (ret < 0)
+ goto bye;
+ }
+
+ /*
+ * Grab VPD parameters. This should be done after we establish a
+ * connection to the firmware since some of the VPD parameters
+ * (notably the Core Clock frequency) are retrieved via requests to
+ * the firmware. On the other hand, we need these fairly early on
+ * so we do this right after getting ahold of the firmware.
+ */
+ ret = get_vpd_params(adap, &adap->params.vpd);
+ if (ret < 0)
+ goto bye;
+
+ /*
+ * Find out what ports are available to us. Note that we need to do
+ * this before calling adap_init0_no_config() since it needs nports
+ * and portvec ...
+ */
+ v =
+ FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
+ FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_PORTVEC);
+ ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 1, &v, &port_vec);
+ if (ret < 0)
+ goto bye;
+
+ adap->params.nports = hweight32(port_vec);
+ adap->params.portvec = port_vec;
+
+ /* If the firmware is initialized already, emit a simply note to that
+ * effect. Otherwise, it's time to try initializing the adapter.
+ */
+ if (state == DEV_STATE_INIT) {
+ dev_info(adap->pdev_dev, "Coming up as %s: "\
+ "Adapter already initialized\n",
+ adap->flags & MASTER_PF ? "MASTER" : "SLAVE");
+ } else {
+ dev_info(adap->pdev_dev, "Coming up as MASTER: "\
+ "Initializing adapter\n");
+
+ /* Find out whether we're dealing with a version of the
+ * firmware which has configuration file support.
+ */
+ params[0] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
+ FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_CF));
+ ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 1,
+ params, val);
+
+ /* If the firmware doesn't support Configuration Files,
+ * return an error.
+ */
+ if (ret < 0) {
+ dev_err(adap->pdev_dev, "firmware doesn't support "
+ "Firmware Configuration Files\n");
+ goto bye;
+ }
+
+ /* The firmware provides us with a memory buffer where we can
+ * load a Configuration File from the host if we want to
+ * override the Configuration File in flash.
+ */
+ ret = adap_init0_config(adap, reset);
+ if (ret == -ENOENT) {
+ dev_err(adap->pdev_dev, "no Configuration File "
+ "present on adapter.\n");
+ goto bye;
+ }
+ if (ret < 0) {
+ dev_err(adap->pdev_dev, "could not initialize "
+ "adapter, error %d\n", -ret);
+ goto bye;
+ }
+ }
+
+ /* Give the SGE code a chance to pull in anything that it needs ...
+ * Note that this must be called after we retrieve our VPD parameters
+ * in order to know how to convert core ticks to seconds, etc.
+ */
+ ret = t4_sge_init(adap);
+ if (ret < 0)
+ goto bye;
+
+ if (is_bypass_device(adap->pdev->device))
+ adap->params.bypass = 1;
+
+ /*
+ * Grab some of our basic fundamental operating parameters.
+ */
+#define FW_PARAM_DEV(param) \
+ (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) | \
+ FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_##param))
+
+#define FW_PARAM_PFVF(param) \
+ FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_PFVF) | \
+ FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_PFVF_##param)| \
+ FW_PARAMS_PARAM_Y_V(0) | \
+ FW_PARAMS_PARAM_Z_V(0)
+
+ params[0] = FW_PARAM_PFVF(EQ_START);
+ params[1] = FW_PARAM_PFVF(L2T_START);
+ params[2] = FW_PARAM_PFVF(L2T_END);
+ params[3] = FW_PARAM_PFVF(FILTER_START);
+ params[4] = FW_PARAM_PFVF(FILTER_END);
+ params[5] = FW_PARAM_PFVF(IQFLINT_START);
+ ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 6, params, val);
+ if (ret < 0)
+ goto bye;
+ adap->sge.egr_start = val[0];
+ adap->l2t_start = val[1];
+ adap->l2t_end = val[2];
+ adap->tids.ftid_base = val[3];
+ adap->tids.nftids = val[4] - val[3] + 1;
+ adap->sge.ingr_start = val[5];
+
+ /* qids (ingress/egress) returned from firmware can be anywhere
+ * in the range from EQ(IQFLINT)_START to EQ(IQFLINT)_END.
+ * Hence driver needs to allocate memory for this range to
+ * store the queue info. Get the highest IQFLINT/EQ index returned
+ * in FW_EQ_*_CMD.alloc command.
+ */
+ params[0] = FW_PARAM_PFVF(EQ_END);
+ params[1] = FW_PARAM_PFVF(IQFLINT_END);
+ ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 2, params, val);
+ if (ret < 0)
+ goto bye;
+ adap->sge.egr_sz = val[0] - adap->sge.egr_start + 1;
+ adap->sge.ingr_sz = val[1] - adap->sge.ingr_start + 1;
+
+ adap->sge.egr_map = kcalloc(adap->sge.egr_sz,
+ sizeof(*adap->sge.egr_map), GFP_KERNEL);
+ if (!adap->sge.egr_map) {
+ ret = -ENOMEM;
+ goto bye;
+ }
+
+ adap->sge.ingr_map = kcalloc(adap->sge.ingr_sz,
+ sizeof(*adap->sge.ingr_map), GFP_KERNEL);
+ if (!adap->sge.ingr_map) {
+ ret = -ENOMEM;
+ goto bye;
+ }
+
+ /* Allocate the memory for the vaious egress queue bitmaps
+ * ie starving_fl and txq_maperr.
+ */
+ adap->sge.starving_fl = kcalloc(BITS_TO_LONGS(adap->sge.egr_sz),
+ sizeof(long), GFP_KERNEL);
+ if (!adap->sge.starving_fl) {
+ ret = -ENOMEM;
+ goto bye;
+ }
+
+ adap->sge.txq_maperr = kcalloc(BITS_TO_LONGS(adap->sge.egr_sz),
+ sizeof(long), GFP_KERNEL);
+ if (!adap->sge.txq_maperr) {
+ ret = -ENOMEM;
+ goto bye;
+ }
+
+ params[0] = FW_PARAM_PFVF(CLIP_START);
+ params[1] = FW_PARAM_PFVF(CLIP_END);
+ ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 2, params, val);
+ if (ret < 0)
+ goto bye;
+ adap->clipt_start = val[0];
+ adap->clipt_end = val[1];
+
+ /* query params related to active filter region */
+ params[0] = FW_PARAM_PFVF(ACTIVE_FILTER_START);
+ params[1] = FW_PARAM_PFVF(ACTIVE_FILTER_END);
+ ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 2, params, val);
+ /* If Active filter size is set we enable establishing
+ * offload connection through firmware work request
+ */
+ if ((val[0] != val[1]) && (ret >= 0)) {
+ adap->flags |= FW_OFLD_CONN;
+ adap->tids.aftid_base = val[0];
+ adap->tids.aftid_end = val[1];
+ }
+
+ /* If we're running on newer firmware, let it know that we're
+ * prepared to deal with encapsulated CPL messages. Older
+ * firmware won't understand this and we'll just get
+ * unencapsulated messages ...
+ */
+ params[0] = FW_PARAM_PFVF(CPLFW4MSG_ENCAP);
+ val[0] = 1;
+ (void) t4_set_params(adap, adap->mbox, adap->fn, 0, 1, params, val);
+
+ /*
+ * Find out whether we're allowed to use the T5+ ULPTX MEMWRITE DSGL
+ * capability. Earlier versions of the firmware didn't have the
+ * ULPTX_MEMWRITE_DSGL so we'll interpret a query failure as no
+ * permission to use ULPTX MEMWRITE DSGL.
+ */
+ if (is_t4(adap->params.chip)) {
+ adap->params.ulptx_memwrite_dsgl = false;
+ } else {
+ params[0] = FW_PARAM_DEV(ULPTX_MEMWRITE_DSGL);
+ ret = t4_query_params(adap, adap->mbox, adap->fn, 0,
+ 1, params, val);
+ adap->params.ulptx_memwrite_dsgl = (ret == 0 && val[0] != 0);
+ }
+
+ /*
+ * Get device capabilities so we can determine what resources we need
+ * to manage.
+ */
+ memset(&caps_cmd, 0, sizeof(caps_cmd));
+ caps_cmd.op_to_write = htonl(FW_CMD_OP_V(FW_CAPS_CONFIG_CMD) |
+ FW_CMD_REQUEST_F | FW_CMD_READ_F);
+ caps_cmd.cfvalid_to_len16 = htonl(FW_LEN16(caps_cmd));
+ ret = t4_wr_mbox(adap, adap->mbox, &caps_cmd, sizeof(caps_cmd),
+ &caps_cmd);
+ if (ret < 0)
+ goto bye;
+
+ if (caps_cmd.ofldcaps) {
+ /* query offload-related parameters */
+ params[0] = FW_PARAM_DEV(NTID);
+ params[1] = FW_PARAM_PFVF(SERVER_START);
+ params[2] = FW_PARAM_PFVF(SERVER_END);
+ params[3] = FW_PARAM_PFVF(TDDP_START);
+ params[4] = FW_PARAM_PFVF(TDDP_END);
+ params[5] = FW_PARAM_DEV(FLOWC_BUFFIFO_SZ);
+ ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 6,
+ params, val);
+ if (ret < 0)
+ goto bye;
+ adap->tids.ntids = val[0];
+ adap->tids.natids = min(adap->tids.ntids / 2, MAX_ATIDS);
+ adap->tids.stid_base = val[1];
+ adap->tids.nstids = val[2] - val[1] + 1;
+ /*
+ * Setup server filter region. Divide the available filter
+ * region into two parts. Regular filters get 1/3rd and server
+ * filters get 2/3rd part. This is only enabled if workarond
+ * path is enabled.
+ * 1. For regular filters.
+ * 2. Server filter: This are special filters which are used
+ * to redirect SYN packets to offload queue.
+ */
+ if (adap->flags & FW_OFLD_CONN && !is_bypass(adap)) {
+ adap->tids.sftid_base = adap->tids.ftid_base +
+ DIV_ROUND_UP(adap->tids.nftids, 3);
+ adap->tids.nsftids = adap->tids.nftids -
+ DIV_ROUND_UP(adap->tids.nftids, 3);
+ adap->tids.nftids = adap->tids.sftid_base -
+ adap->tids.ftid_base;
+ }
+ adap->vres.ddp.start = val[3];
+ adap->vres.ddp.size = val[4] - val[3] + 1;
+ adap->params.ofldq_wr_cred = val[5];
+
+ adap->params.offload = 1;
+ }
+ if (caps_cmd.rdmacaps) {
+ params[0] = FW_PARAM_PFVF(STAG_START);
+ params[1] = FW_PARAM_PFVF(STAG_END);
+ params[2] = FW_PARAM_PFVF(RQ_START);
+ params[3] = FW_PARAM_PFVF(RQ_END);
+ params[4] = FW_PARAM_PFVF(PBL_START);
+ params[5] = FW_PARAM_PFVF(PBL_END);
+ ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 6,
+ params, val);
+ if (ret < 0)
+ goto bye;
+ adap->vres.stag.start = val[0];
+ adap->vres.stag.size = val[1] - val[0] + 1;
+ adap->vres.rq.start = val[2];
+ adap->vres.rq.size = val[3] - val[2] + 1;
+ adap->vres.pbl.start = val[4];
+ adap->vres.pbl.size = val[5] - val[4] + 1;
+
+ params[0] = FW_PARAM_PFVF(SQRQ_START);
+ params[1] = FW_PARAM_PFVF(SQRQ_END);
+ params[2] = FW_PARAM_PFVF(CQ_START);
+ params[3] = FW_PARAM_PFVF(CQ_END);
+ params[4] = FW_PARAM_PFVF(OCQ_START);
+ params[5] = FW_PARAM_PFVF(OCQ_END);
+ ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 6, params,
+ val);
+ if (ret < 0)
+ goto bye;
+ adap->vres.qp.start = val[0];
+ adap->vres.qp.size = val[1] - val[0] + 1;
+ adap->vres.cq.start = val[2];
+ adap->vres.cq.size = val[3] - val[2] + 1;
+ adap->vres.ocq.start = val[4];
+ adap->vres.ocq.size = val[5] - val[4] + 1;
+
+ params[0] = FW_PARAM_DEV(MAXORDIRD_QP);
+ params[1] = FW_PARAM_DEV(MAXIRD_ADAPTER);
+ ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 2, params,
+ val);
+ if (ret < 0) {
+ adap->params.max_ordird_qp = 8;
+ adap->params.max_ird_adapter = 32 * adap->tids.ntids;
+ ret = 0;
+ } else {
+ adap->params.max_ordird_qp = val[0];
+ adap->params.max_ird_adapter = val[1];
+ }
+ dev_info(adap->pdev_dev,
+ "max_ordird_qp %d max_ird_adapter %d\n",
+ adap->params.max_ordird_qp,
+ adap->params.max_ird_adapter);
+ }
+ if (caps_cmd.iscsicaps) {
+ params[0] = FW_PARAM_PFVF(ISCSI_START);
+ params[1] = FW_PARAM_PFVF(ISCSI_END);
+ ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 2,
+ params, val);
+ if (ret < 0)
+ goto bye;
+ adap->vres.iscsi.start = val[0];
+ adap->vres.iscsi.size = val[1] - val[0] + 1;
+ }
+#undef FW_PARAM_PFVF
+#undef FW_PARAM_DEV
+
+ /* The MTU/MSS Table is initialized by now, so load their values. If
+ * we're initializing the adapter, then we'll make any modifications
+ * we want to the MTU/MSS Table and also initialize the congestion
+ * parameters.
+ */
+ t4_read_mtu_tbl(adap, adap->params.mtus, NULL);
+ if (state != DEV_STATE_INIT) {
+ int i;
+
+ /* The default MTU Table contains values 1492 and 1500.
+ * However, for TCP, it's better to have two values which are
+ * a multiple of 8 +/- 4 bytes apart near this popular MTU.
+ * This allows us to have a TCP Data Payload which is a
+ * multiple of 8 regardless of what combination of TCP Options
+ * are in use (always a multiple of 4 bytes) which is
+ * important for performance reasons. For instance, if no
+ * options are in use, then we have a 20-byte IP header and a
+ * 20-byte TCP header. In this case, a 1500-byte MSS would
+ * result in a TCP Data Payload of 1500 - 40 == 1460 bytes
+ * which is not a multiple of 8. So using an MSS of 1488 in
+ * this case results in a TCP Data Payload of 1448 bytes which
+ * is a multiple of 8. On the other hand, if 12-byte TCP Time
+ * Stamps have been negotiated, then an MTU of 1500 bytes
+ * results in a TCP Data Payload of 1448 bytes which, as
+ * above, is a multiple of 8 bytes ...
+ */
+ for (i = 0; i < NMTUS; i++)
+ if (adap->params.mtus[i] == 1492) {
+ adap->params.mtus[i] = 1488;
+ break;
+ }
+
+ t4_load_mtus(adap, adap->params.mtus, adap->params.a_wnd,
+ adap->params.b_wnd);
+ }
+ t4_init_sge_params(adap);
+ t4_init_tp_params(adap);
+ adap->flags |= FW_OK;
+ return 0;
+
+ /*
+ * Something bad happened. If a command timed out or failed with EIO
+ * FW does not operate within its spec or something catastrophic
+ * happened to HW/FW, stop issuing commands.
+ */
+bye:
+ kfree(adap->sge.egr_map);
+ kfree(adap->sge.ingr_map);
+ kfree(adap->sge.starving_fl);
+ kfree(adap->sge.txq_maperr);
+ if (ret != -ETIMEDOUT && ret != -EIO)
+ t4_fw_bye(adap, adap->mbox);
+ return ret;
+}
+
+/* EEH callbacks */
+
+static pci_ers_result_t eeh_err_detected(struct pci_dev *pdev,
+ pci_channel_state_t state)
+{
+ int i;
+ struct adapter *adap = pci_get_drvdata(pdev);
+
+ if (!adap)
+ goto out;
+
+ rtnl_lock();
+ adap->flags &= ~FW_OK;
+ notify_ulds(adap, CXGB4_STATE_START_RECOVERY);
+ spin_lock(&adap->stats_lock);
+ for_each_port(adap, i) {
+ struct net_device *dev = adap->port[i];
+
+ netif_device_detach(dev);
+ netif_carrier_off(dev);
+ }
+ spin_unlock(&adap->stats_lock);
+ disable_interrupts(adap);
+ if (adap->flags & FULL_INIT_DONE)
+ cxgb_down(adap);
+ rtnl_unlock();
+ if ((adap->flags & DEV_ENABLED)) {
+ pci_disable_device(pdev);
+ adap->flags &= ~DEV_ENABLED;
+ }
+out: return state == pci_channel_io_perm_failure ?
+ PCI_ERS_RESULT_DISCONNECT : PCI_ERS_RESULT_NEED_RESET;
+}
+
+static pci_ers_result_t eeh_slot_reset(struct pci_dev *pdev)
+{
+ int i, ret;
+ struct fw_caps_config_cmd c;
+ struct adapter *adap = pci_get_drvdata(pdev);
+
+ if (!adap) {
+ pci_restore_state(pdev);
+ pci_save_state(pdev);
+ return PCI_ERS_RESULT_RECOVERED;
+ }
+
+ if (!(adap->flags & DEV_ENABLED)) {
+ if (pci_enable_device(pdev)) {
+ dev_err(&pdev->dev, "Cannot reenable PCI "
+ "device after reset\n");
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+ adap->flags |= DEV_ENABLED;
+ }
+
+ pci_set_master(pdev);
+ pci_restore_state(pdev);
+ pci_save_state(pdev);
+ pci_cleanup_aer_uncorrect_error_status(pdev);
+
+ if (t4_wait_dev_ready(adap->regs) < 0)
+ return PCI_ERS_RESULT_DISCONNECT;
+ if (t4_fw_hello(adap, adap->fn, adap->fn, MASTER_MUST, NULL) < 0)
+ return PCI_ERS_RESULT_DISCONNECT;
+ adap->flags |= FW_OK;
+ if (adap_init1(adap, &c))
+ return PCI_ERS_RESULT_DISCONNECT;
+
+ for_each_port(adap, i) {
+ struct port_info *p = adap2pinfo(adap, i);
+
+ ret = t4_alloc_vi(adap, adap->fn, p->tx_chan, adap->fn, 0, 1,
+ NULL, NULL);
+ if (ret < 0)
+ return PCI_ERS_RESULT_DISCONNECT;
+ p->viid = ret;
+ p->xact_addr_filt = -1;
+ }
+
+ t4_load_mtus(adap, adap->params.mtus, adap->params.a_wnd,
+ adap->params.b_wnd);
+ setup_memwin(adap);
+ if (cxgb_up(adap))
+ return PCI_ERS_RESULT_DISCONNECT;
+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+static void eeh_resume(struct pci_dev *pdev)
+{
+ int i;
+ struct adapter *adap = pci_get_drvdata(pdev);
+
+ if (!adap)
+ return;
+
+ rtnl_lock();
+ for_each_port(adap, i) {
+ struct net_device *dev = adap->port[i];
+
+ if (netif_running(dev)) {
+ link_start(dev);
+ cxgb_set_rxmode(dev);
+ }
+ netif_device_attach(dev);
+ }
+ rtnl_unlock();
+}
+
+static const struct pci_error_handlers cxgb4_eeh = {
+ .error_detected = eeh_err_detected,
+ .slot_reset = eeh_slot_reset,
+ .resume = eeh_resume,
+};
+
+static inline bool is_x_10g_port(const struct link_config *lc)
+{
+ return (lc->supported & FW_PORT_CAP_SPEED_10G) != 0 ||
+ (lc->supported & FW_PORT_CAP_SPEED_40G) != 0;
+}
+
+static inline void init_rspq(struct adapter *adap, struct sge_rspq *q,
+ unsigned int us, unsigned int cnt,
+ unsigned int size, unsigned int iqe_size)
+{
+ q->adap = adap;
+ cxgb4_set_rspq_intr_params(q, us, cnt);
+ q->iqe_len = iqe_size;
+ q->size = size;
+}
+
+/*
+ * Perform default configuration of DMA queues depending on the number and type
+ * of ports we found and the number of available CPUs. Most settings can be
+ * modified by the admin prior to actual use.
+ */
+static void cfg_queues(struct adapter *adap)
+{
+ struct sge *s = &adap->sge;
+ int i, n10g = 0, qidx = 0;
+#ifndef CONFIG_CHELSIO_T4_DCB
+ int q10g = 0;
+#endif
+ int ciq_size;
+
+ for_each_port(adap, i)
+ n10g += is_x_10g_port(&adap2pinfo(adap, i)->link_cfg);
+#ifdef CONFIG_CHELSIO_T4_DCB
+ /* For Data Center Bridging support we need to be able to support up
+ * to 8 Traffic Priorities; each of which will be assigned to its
+ * own TX Queue in order to prevent Head-Of-Line Blocking.
+ */
+ if (adap->params.nports * 8 > MAX_ETH_QSETS) {
+ dev_err(adap->pdev_dev, "MAX_ETH_QSETS=%d < %d!\n",
+ MAX_ETH_QSETS, adap->params.nports * 8);
+ BUG_ON(1);
+ }
+
+ for_each_port(adap, i) {
+ struct port_info *pi = adap2pinfo(adap, i);
+
+ pi->first_qset = qidx;
+ pi->nqsets = 8;
+ qidx += pi->nqsets;
+ }
+#else /* !CONFIG_CHELSIO_T4_DCB */
+ /*
+ * We default to 1 queue per non-10G port and up to # of cores queues
+ * per 10G port.
+ */
+ if (n10g)
+ q10g = (MAX_ETH_QSETS - (adap->params.nports - n10g)) / n10g;
+ if (q10g > netif_get_num_default_rss_queues())
+ q10g = netif_get_num_default_rss_queues();
+
+ for_each_port(adap, i) {
+ struct port_info *pi = adap2pinfo(adap, i);
+
+ pi->first_qset = qidx;
+ pi->nqsets = is_x_10g_port(&pi->link_cfg) ? q10g : 1;
+ qidx += pi->nqsets;
+ }
+#endif /* !CONFIG_CHELSIO_T4_DCB */
+
+ s->ethqsets = qidx;
+ s->max_ethqsets = qidx; /* MSI-X may lower it later */
+
+ if (is_offload(adap)) {
+ /*
+ * For offload we use 1 queue/channel if all ports are up to 1G,
+ * otherwise we divide all available queues amongst the channels
+ * capped by the number of available cores.
+ */
+ if (n10g) {
+ i = min_t(int, ARRAY_SIZE(s->ofldrxq),
+ num_online_cpus());
+ s->ofldqsets = roundup(i, adap->params.nports);
+ } else
+ s->ofldqsets = adap->params.nports;
+ /* For RDMA one Rx queue per channel suffices */
+ s->rdmaqs = adap->params.nports;
+ /* Try and allow at least 1 CIQ per cpu rounding down
+ * to the number of ports, with a minimum of 1 per port.
+ * A 2 port card in a 6 cpu system: 6 CIQs, 3 / port.
+ * A 4 port card in a 6 cpu system: 4 CIQs, 1 / port.
+ * A 4 port card in a 2 cpu system: 4 CIQs, 1 / port.
+ */
+ s->rdmaciqs = min_t(int, MAX_RDMA_CIQS, num_online_cpus());
+ s->rdmaciqs = (s->rdmaciqs / adap->params.nports) *
+ adap->params.nports;
+ s->rdmaciqs = max_t(int, s->rdmaciqs, adap->params.nports);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(s->ethrxq); i++) {
+ struct sge_eth_rxq *r = &s->ethrxq[i];
+
+ init_rspq(adap, &r->rspq, 5, 10, 1024, 64);
+ r->fl.size = 72;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(s->ethtxq); i++)
+ s->ethtxq[i].q.size = 1024;
+
+ for (i = 0; i < ARRAY_SIZE(s->ctrlq); i++)
+ s->ctrlq[i].q.size = 512;
+
+ for (i = 0; i < ARRAY_SIZE(s->ofldtxq); i++)
+ s->ofldtxq[i].q.size = 1024;
+
+ for (i = 0; i < ARRAY_SIZE(s->ofldrxq); i++) {
+ struct sge_ofld_rxq *r = &s->ofldrxq[i];
+
+ init_rspq(adap, &r->rspq, 5, 1, 1024, 64);
+ r->rspq.uld = CXGB4_ULD_ISCSI;
+ r->fl.size = 72;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(s->rdmarxq); i++) {
+ struct sge_ofld_rxq *r = &s->rdmarxq[i];
+
+ init_rspq(adap, &r->rspq, 5, 1, 511, 64);
+ r->rspq.uld = CXGB4_ULD_RDMA;
+ r->fl.size = 72;
+ }
+
+ ciq_size = 64 + adap->vres.cq.size + adap->tids.nftids;
+ if (ciq_size > SGE_MAX_IQ_SIZE) {
+ CH_WARN(adap, "CIQ size too small for available IQs\n");
+ ciq_size = SGE_MAX_IQ_SIZE;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(s->rdmaciq); i++) {
+ struct sge_ofld_rxq *r = &s->rdmaciq[i];
+
+ init_rspq(adap, &r->rspq, 5, 1, ciq_size, 64);
+ r->rspq.uld = CXGB4_ULD_RDMA;
+ }
+
+ init_rspq(adap, &s->fw_evtq, 0, 1, 1024, 64);
+ init_rspq(adap, &s->intrq, 0, 1, 2 * MAX_INGQ, 64);
+}
+
+/*
+ * Reduce the number of Ethernet queues across all ports to at most n.
+ * n provides at least one queue per port.
+ */
+static void reduce_ethqs(struct adapter *adap, int n)
+{
+ int i;
+ struct port_info *pi;
+
+ while (n < adap->sge.ethqsets)
+ for_each_port(adap, i) {
+ pi = adap2pinfo(adap, i);
+ if (pi->nqsets > 1) {
+ pi->nqsets--;
+ adap->sge.ethqsets--;
+ if (adap->sge.ethqsets <= n)
+ break;
+ }
+ }
+
+ n = 0;
+ for_each_port(adap, i) {
+ pi = adap2pinfo(adap, i);
+ pi->first_qset = n;
+ n += pi->nqsets;
+ }
+}
+
+/* 2 MSI-X vectors needed for the FW queue and non-data interrupts */
+#define EXTRA_VECS 2
+
+static int enable_msix(struct adapter *adap)
+{
+ int ofld_need = 0;
+ int i, want, need, allocated;
+ struct sge *s = &adap->sge;
+ unsigned int nchan = adap->params.nports;
+ struct msix_entry *entries;
+
+ entries = kmalloc(sizeof(*entries) * (MAX_INGQ + 1),
+ GFP_KERNEL);
+ if (!entries)
+ return -ENOMEM;
+
+ for (i = 0; i < MAX_INGQ + 1; ++i)
+ entries[i].entry = i;
+
+ want = s->max_ethqsets + EXTRA_VECS;
+ if (is_offload(adap)) {
+ want += s->rdmaqs + s->rdmaciqs + s->ofldqsets;
+ /* need nchan for each possible ULD */
+ ofld_need = 3 * nchan;
+ }
+#ifdef CONFIG_CHELSIO_T4_DCB
+ /* For Data Center Bridging we need 8 Ethernet TX Priority Queues for
+ * each port.
+ */
+ need = 8 * adap->params.nports + EXTRA_VECS + ofld_need;
+#else
+ need = adap->params.nports + EXTRA_VECS + ofld_need;
+#endif
+ allocated = pci_enable_msix_range(adap->pdev, entries, need, want);
+ if (allocated < 0) {
+ dev_info(adap->pdev_dev, "not enough MSI-X vectors left,"
+ " not using MSI-X\n");
+ kfree(entries);
+ return allocated;
+ }
+
+ /* Distribute available vectors to the various queue groups.
+ * Every group gets its minimum requirement and NIC gets top
+ * priority for leftovers.
+ */
+ i = allocated - EXTRA_VECS - ofld_need;
+ if (i < s->max_ethqsets) {
+ s->max_ethqsets = i;
+ if (i < s->ethqsets)
+ reduce_ethqs(adap, i);
+ }
+ if (is_offload(adap)) {
+ if (allocated < want) {
+ s->rdmaqs = nchan;
+ s->rdmaciqs = nchan;
+ }
+
+ /* leftovers go to OFLD */
+ i = allocated - EXTRA_VECS - s->max_ethqsets -
+ s->rdmaqs - s->rdmaciqs;
+ s->ofldqsets = (i / nchan) * nchan; /* round down */
+ }
+ for (i = 0; i < allocated; ++i)
+ adap->msix_info[i].vec = entries[i].vector;
+
+ kfree(entries);
+ return 0;
+}
+
+#undef EXTRA_VECS
+
+static int init_rss(struct adapter *adap)
+{
+ unsigned int i, j;
+
+ for_each_port(adap, i) {
+ struct port_info *pi = adap2pinfo(adap, i);
+
+ pi->rss = kcalloc(pi->rss_size, sizeof(u16), GFP_KERNEL);
+ if (!pi->rss)
+ return -ENOMEM;
+ for (j = 0; j < pi->rss_size; j++)
+ pi->rss[j] = ethtool_rxfh_indir_default(j, pi->nqsets);
+ }
+ return 0;
+}
+
+static void print_port_info(const struct net_device *dev)
+{
+ char buf[80];
+ char *bufp = buf;
+ const char *spd = "";
+ const struct port_info *pi = netdev_priv(dev);
+ const struct adapter *adap = pi->adapter;
+
+ if (adap->params.pci.speed == PCI_EXP_LNKSTA_CLS_2_5GB)
+ spd = " 2.5 GT/s";
+ else if (adap->params.pci.speed == PCI_EXP_LNKSTA_CLS_5_0GB)
+ spd = " 5 GT/s";
+ else if (adap->params.pci.speed == PCI_EXP_LNKSTA_CLS_8_0GB)
+ spd = " 8 GT/s";
+
+ if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_100M)
+ bufp += sprintf(bufp, "100/");
+ if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_1G)
+ bufp += sprintf(bufp, "1000/");
+ if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_10G)
+ bufp += sprintf(bufp, "10G/");
+ if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_40G)
+ bufp += sprintf(bufp, "40G/");
+ if (bufp != buf)
+ --bufp;
+ sprintf(bufp, "BASE-%s", t4_get_port_type_description(pi->port_type));
+
+ netdev_info(dev, "Chelsio %s rev %d %s %sNIC PCIe x%d%s%s\n",
+ adap->params.vpd.id,
+ CHELSIO_CHIP_RELEASE(adap->params.chip), buf,
+ is_offload(adap) ? "R" : "", adap->params.pci.width, spd,
+ (adap->flags & USING_MSIX) ? " MSI-X" :
+ (adap->flags & USING_MSI) ? " MSI" : "");
+ netdev_info(dev, "S/N: %s, P/N: %s\n",
+ adap->params.vpd.sn, adap->params.vpd.pn);
+}
+
+static void enable_pcie_relaxed_ordering(struct pci_dev *dev)
+{
+ pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_RELAX_EN);
+}
+
+/*
+ * Free the following resources:
+ * - memory used for tables
+ * - MSI/MSI-X
+ * - net devices
+ * - resources FW is holding for us
+ */
+static void free_some_resources(struct adapter *adapter)
+{
+ unsigned int i;
+
+ t4_free_mem(adapter->l2t);
+ t4_free_mem(adapter->tids.tid_tab);
+ kfree(adapter->sge.egr_map);
+ kfree(adapter->sge.ingr_map);
+ kfree(adapter->sge.starving_fl);
+ kfree(adapter->sge.txq_maperr);
+ disable_msi(adapter);
+
+ for_each_port(adapter, i)
+ if (adapter->port[i]) {
+ kfree(adap2pinfo(adapter, i)->rss);
+ free_netdev(adapter->port[i]);
+ }
+ if (adapter->flags & FW_OK)
+ t4_fw_bye(adapter, adapter->fn);
+}
+
+#define TSO_FLAGS (NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_TSO_ECN)
+#define VLAN_FEAT (NETIF_F_SG | NETIF_F_IP_CSUM | TSO_FLAGS | \
+ NETIF_F_IPV6_CSUM | NETIF_F_HIGHDMA)
+#define SEGMENT_SIZE 128
+
+static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ int func, i, err, s_qpp, qpp, num_seg;
+ struct port_info *pi;
+ bool highdma = false;
+ struct adapter *adapter = NULL;
+ void __iomem *regs;
+
+ printk_once(KERN_INFO "%s - version %s\n", DRV_DESC, DRV_VERSION);
+
+ err = pci_request_regions(pdev, KBUILD_MODNAME);
+ if (err) {
+ /* Just info, some other driver may have claimed the device. */
+ dev_info(&pdev->dev, "cannot obtain PCI resources\n");
+ return err;
+ }
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "cannot enable PCI device\n");
+ goto out_release_regions;
+ }
+
+ regs = pci_ioremap_bar(pdev, 0);
+ if (!regs) {
+ dev_err(&pdev->dev, "cannot map device registers\n");
+ err = -ENOMEM;
+ goto out_disable_device;
+ }
+
+ err = t4_wait_dev_ready(regs);
+ if (err < 0)
+ goto out_unmap_bar0;
+
+ /* We control everything through one PF */
+ func = SOURCEPF_G(readl(regs + PL_WHOAMI_A));
+ if (func != ent->driver_data) {
+ iounmap(regs);
+ pci_disable_device(pdev);
+ pci_save_state(pdev); /* to restore SR-IOV later */
+ goto sriov;
+ }
+
+ if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
+ highdma = true;
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (err) {
+ dev_err(&pdev->dev, "unable to obtain 64-bit DMA for "
+ "coherent allocations\n");
+ goto out_unmap_bar0;
+ }
+ } else {
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (err) {
+ dev_err(&pdev->dev, "no usable DMA configuration\n");
+ goto out_unmap_bar0;
+ }
+ }
+
+ pci_enable_pcie_error_reporting(pdev);
+ enable_pcie_relaxed_ordering(pdev);
+ pci_set_master(pdev);
+ pci_save_state(pdev);
+
+ adapter = kzalloc(sizeof(*adapter), GFP_KERNEL);
+ if (!adapter) {
+ err = -ENOMEM;
+ goto out_unmap_bar0;
+ }
+
+ adapter->workq = create_singlethread_workqueue("cxgb4");
+ if (!adapter->workq) {
+ err = -ENOMEM;
+ goto out_free_adapter;
+ }
+
+ /* PCI device has been enabled */
+ adapter->flags |= DEV_ENABLED;
+
+ adapter->regs = regs;
+ adapter->pdev = pdev;
+ adapter->pdev_dev = &pdev->dev;
+ adapter->mbox = func;
+ adapter->fn = func;
+ adapter->msg_enable = dflt_msg_enable;
+ memset(adapter->chan_map, 0xff, sizeof(adapter->chan_map));
+
+ spin_lock_init(&adapter->stats_lock);
+ spin_lock_init(&adapter->tid_release_lock);
+ spin_lock_init(&adapter->win0_lock);
+
+ INIT_WORK(&adapter->tid_release_task, process_tid_release_list);
+ INIT_WORK(&adapter->db_full_task, process_db_full);
+ INIT_WORK(&adapter->db_drop_task, process_db_drop);
+
+ err = t4_prep_adapter(adapter);
+ if (err)
+ goto out_free_adapter;
+
+
+ if (!is_t4(adapter->params.chip)) {
+ s_qpp = (QUEUESPERPAGEPF0_S +
+ (QUEUESPERPAGEPF1_S - QUEUESPERPAGEPF0_S) *
+ adapter->fn);
+ qpp = 1 << QUEUESPERPAGEPF0_G(t4_read_reg(adapter,
+ SGE_EGRESS_QUEUES_PER_PAGE_PF_A) >> s_qpp);
+ num_seg = PAGE_SIZE / SEGMENT_SIZE;
+
+ /* Each segment size is 128B. Write coalescing is enabled only
+ * when SGE_EGRESS_QUEUES_PER_PAGE_PF reg value for the
+ * queue is less no of segments that can be accommodated in
+ * a page size.
+ */
+ if (qpp > num_seg) {
+ dev_err(&pdev->dev,
+ "Incorrect number of egress queues per page\n");
+ err = -EINVAL;
+ goto out_free_adapter;
+ }
+ adapter->bar2 = ioremap_wc(pci_resource_start(pdev, 2),
+ pci_resource_len(pdev, 2));
+ if (!adapter->bar2) {
+ dev_err(&pdev->dev, "cannot map device bar2 region\n");
+ err = -ENOMEM;
+ goto out_free_adapter;
+ }
+ }
+
+ setup_memwin(adapter);
+ err = adap_init0(adapter);
+ setup_memwin_rdma(adapter);
+ if (err)
+ goto out_unmap_bar;
+
+ for_each_port(adapter, i) {
+ struct net_device *netdev;
+
+ netdev = alloc_etherdev_mq(sizeof(struct port_info),
+ MAX_ETH_QSETS);
+ if (!netdev) {
+ err = -ENOMEM;
+ goto out_free_dev;
+ }
+
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+
+ adapter->port[i] = netdev;
+ pi = netdev_priv(netdev);
+ pi->adapter = adapter;
+ pi->xact_addr_filt = -1;
+ pi->port_id = i;
+ netdev->irq = pdev->irq;
+
+ netdev->hw_features = NETIF_F_SG | TSO_FLAGS |
+ NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+ NETIF_F_RXCSUM | NETIF_F_RXHASH |
+ NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX;
+ if (highdma)
+ netdev->hw_features |= NETIF_F_HIGHDMA;
+ netdev->features |= netdev->hw_features;
+ netdev->vlan_features = netdev->features & VLAN_FEAT;
+
+ netdev->priv_flags |= IFF_UNICAST_FLT;
+
+ netdev->netdev_ops = &cxgb4_netdev_ops;
+#ifdef CONFIG_CHELSIO_T4_DCB
+ netdev->dcbnl_ops = &cxgb4_dcb_ops;
+ cxgb4_dcb_state_init(netdev);
+#endif
+ cxgb4_set_ethtool_ops(netdev);
+ }
+
+ pci_set_drvdata(pdev, adapter);
+
+ if (adapter->flags & FW_OK) {
+ err = t4_port_init(adapter, func, func, 0);
+ if (err)
+ goto out_free_dev;
+ }
+
+ /*
+ * Configure queues and allocate tables now, they can be needed as
+ * soon as the first register_netdev completes.
+ */
+ cfg_queues(adapter);
+
+ adapter->l2t = t4_init_l2t();
+ if (!adapter->l2t) {
+ /* We tolerate a lack of L2T, giving up some functionality */
+ dev_warn(&pdev->dev, "could not allocate L2T, continuing\n");
+ adapter->params.offload = 0;
+ }
+
+#if IS_ENABLED(CONFIG_IPV6)
+ adapter->clipt = t4_init_clip_tbl(adapter->clipt_start,
+ adapter->clipt_end);
+ if (!adapter->clipt) {
+ /* We tolerate a lack of clip_table, giving up
+ * some functionality
+ */
+ dev_warn(&pdev->dev,
+ "could not allocate Clip table, continuing\n");
+ adapter->params.offload = 0;
+ }
+#endif
+ if (is_offload(adapter) && tid_init(&adapter->tids) < 0) {
+ dev_warn(&pdev->dev, "could not allocate TID table, "
+ "continuing\n");
+ adapter->params.offload = 0;
+ }
+
+ /* See what interrupts we'll be using */
+ if (msi > 1 && enable_msix(adapter) == 0)
+ adapter->flags |= USING_MSIX;
+ else if (msi > 0 && pci_enable_msi(pdev) == 0)
+ adapter->flags |= USING_MSI;
+
+ err = init_rss(adapter);
+ if (err)
+ goto out_free_dev;
+
+ /*
+ * The card is now ready to go. If any errors occur during device
+ * registration we do not fail the whole card but rather proceed only
+ * with the ports we manage to register successfully. However we must
+ * register at least one net device.
+ */
+ for_each_port(adapter, i) {
+ pi = adap2pinfo(adapter, i);
+ netif_set_real_num_tx_queues(adapter->port[i], pi->nqsets);
+ netif_set_real_num_rx_queues(adapter->port[i], pi->nqsets);
+
+ err = register_netdev(adapter->port[i]);
+ if (err)
+ break;
+ adapter->chan_map[pi->tx_chan] = i;
+ print_port_info(adapter->port[i]);
+ }
+ if (i == 0) {
+ dev_err(&pdev->dev, "could not register any net devices\n");
+ goto out_free_dev;
+ }
+ if (err) {
+ dev_warn(&pdev->dev, "only %d net devices registered\n", i);
+ err = 0;
+ }
+
+ if (cxgb4_debugfs_root) {
+ adapter->debugfs_root = debugfs_create_dir(pci_name(pdev),
+ cxgb4_debugfs_root);
+ setup_debugfs(adapter);
+ }
+
+ /* PCIe EEH recovery on powerpc platforms needs fundamental reset */
+ pdev->needs_freset = 1;
+
+ if (is_offload(adapter))
+ attach_ulds(adapter);
+
+sriov:
+#ifdef CONFIG_PCI_IOV
+ if (func < ARRAY_SIZE(num_vf) && num_vf[func] > 0)
+ if (pci_enable_sriov(pdev, num_vf[func]) == 0)
+ dev_info(&pdev->dev,
+ "instantiated %u virtual functions\n",
+ num_vf[func]);
+#endif
+ return 0;
+
+ out_free_dev:
+ free_some_resources(adapter);
+ out_unmap_bar:
+ if (!is_t4(adapter->params.chip))
+ iounmap(adapter->bar2);
+ out_free_adapter:
+ if (adapter->workq)
+ destroy_workqueue(adapter->workq);
+
+ kfree(adapter);
+ out_unmap_bar0:
+ iounmap(regs);
+ out_disable_device:
+ pci_disable_pcie_error_reporting(pdev);
+ pci_disable_device(pdev);
+ out_release_regions:
+ pci_release_regions(pdev);
+ return err;
+}
+
+static void remove_one(struct pci_dev *pdev)
+{
+ struct adapter *adapter = pci_get_drvdata(pdev);
+
+#ifdef CONFIG_PCI_IOV
+ pci_disable_sriov(pdev);
+
+#endif
+
+ if (adapter) {
+ int i;
+
+ /* Tear down per-adapter Work Queue first since it can contain
+ * references to our adapter data structure.
+ */
+ destroy_workqueue(adapter->workq);
+
+ if (is_offload(adapter))
+ detach_ulds(adapter);
+
+ disable_interrupts(adapter);
+
+ for_each_port(adapter, i)
+ if (adapter->port[i]->reg_state == NETREG_REGISTERED)
+ unregister_netdev(adapter->port[i]);
+
+ debugfs_remove_recursive(adapter->debugfs_root);
+
+ /* If we allocated filters, free up state associated with any
+ * valid filters ...
+ */
+ if (adapter->tids.ftid_tab) {
+ struct filter_entry *f = &adapter->tids.ftid_tab[0];
+ for (i = 0; i < (adapter->tids.nftids +
+ adapter->tids.nsftids); i++, f++)
+ if (f->valid)
+ clear_filter(adapter, f);
+ }
+
+ if (adapter->flags & FULL_INIT_DONE)
+ cxgb_down(adapter);
+
+ free_some_resources(adapter);
+#if IS_ENABLED(CONFIG_IPV6)
+ t4_cleanup_clip_tbl(adapter);
+#endif
+ iounmap(adapter->regs);
+ if (!is_t4(adapter->params.chip))
+ iounmap(adapter->bar2);
+ pci_disable_pcie_error_reporting(pdev);
+ if ((adapter->flags & DEV_ENABLED)) {
+ pci_disable_device(pdev);
+ adapter->flags &= ~DEV_ENABLED;
+ }
+ pci_release_regions(pdev);
+ synchronize_rcu();
+ kfree(adapter);
+ } else
+ pci_release_regions(pdev);
+}
+
+static struct pci_driver cxgb4_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = cxgb4_pci_tbl,
+ .probe = init_one,
+ .remove = remove_one,
+ .shutdown = remove_one,
+ .err_handler = &cxgb4_eeh,
+};
+
+static int __init cxgb4_init_module(void)
+{
+ int ret;
+
+ /* Debugfs support is optional, just warn if this fails */
+ cxgb4_debugfs_root = debugfs_create_dir(KBUILD_MODNAME, NULL);
+ if (!cxgb4_debugfs_root)
+ pr_warn("could not create debugfs entry, continuing\n");
+
+ ret = pci_register_driver(&cxgb4_driver);
+ if (ret < 0)
+ debugfs_remove(cxgb4_debugfs_root);
+
+#if IS_ENABLED(CONFIG_IPV6)
+ if (!inet6addr_registered) {
+ register_inet6addr_notifier(&cxgb4_inet6addr_notifier);
+ inet6addr_registered = true;
+ }
+#endif
+
+ return ret;
+}
+
+static void __exit cxgb4_cleanup_module(void)
+{
+#if IS_ENABLED(CONFIG_IPV6)
+ if (inet6addr_registered) {
+ unregister_inet6addr_notifier(&cxgb4_inet6addr_notifier);
+ inet6addr_registered = false;
+ }
+#endif
+ pci_unregister_driver(&cxgb4_driver);
+ debugfs_remove(cxgb4_debugfs_root); /* NULL ok */
+}
+
+module_init(cxgb4_init_module);
+module_exit(cxgb4_cleanup_module);
Code Review / kvmfornfv.git / blobdiff