--- /dev/null
+/*
+ * Copyright (c) 2004-2008 Chelsio, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _FIRMWARE_EXPORTS_H_
+#define _FIRMWARE_EXPORTS_H_
+
+/* WR OPCODES supported by the firmware.
+ */
+#define FW_WROPCODE_FORWARD 0x01
+#define FW_WROPCODE_BYPASS 0x05
+
+#define FW_WROPCODE_TUNNEL_TX_PKT 0x03
+
+#define FW_WROPOCDE_ULPTX_DATA_SGL 0x00
+#define FW_WROPCODE_ULPTX_MEM_READ 0x02
+#define FW_WROPCODE_ULPTX_PKT 0x04
+#define FW_WROPCODE_ULPTX_INVALIDATE 0x06
+
+#define FW_WROPCODE_TUNNEL_RX_PKT 0x07
+
+#define FW_WROPCODE_OFLD_GETTCB_RPL 0x08
+#define FW_WROPCODE_OFLD_CLOSE_CON 0x09
+#define FW_WROPCODE_OFLD_TP_ABORT_CON_REQ 0x0A
+#define FW_WROPCODE_OFLD_HOST_ABORT_CON_RPL 0x0F
+#define FW_WROPCODE_OFLD_HOST_ABORT_CON_REQ 0x0B
+#define FW_WROPCODE_OFLD_TP_ABORT_CON_RPL 0x0C
+#define FW_WROPCODE_OFLD_TX_DATA 0x0D
+#define FW_WROPCODE_OFLD_TX_DATA_ACK 0x0E
+
+#define FW_WROPCODE_RI_RDMA_INIT 0x10
+#define FW_WROPCODE_RI_RDMA_WRITE 0x11
+#define FW_WROPCODE_RI_RDMA_READ_REQ 0x12
+#define FW_WROPCODE_RI_RDMA_READ_RESP 0x13
+#define FW_WROPCODE_RI_SEND 0x14
+#define FW_WROPCODE_RI_TERMINATE 0x15
+#define FW_WROPCODE_RI_RDMA_READ 0x16
+#define FW_WROPCODE_RI_RECEIVE 0x17
+#define FW_WROPCODE_RI_BIND_MW 0x18
+#define FW_WROPCODE_RI_FASTREGISTER_MR 0x19
+#define FW_WROPCODE_RI_LOCAL_INV 0x1A
+#define FW_WROPCODE_RI_MODIFY_QP 0x1B
+#define FW_WROPCODE_RI_BYPASS 0x1C
+
+#define FW_WROPOCDE_RSVD 0x1E
+
+#define FW_WROPCODE_SGE_EGRESSCONTEXT_RR 0x1F
+
+#define FW_WROPCODE_MNGT 0x1D
+#define FW_MNGTOPCODE_PKTSCHED_SET 0x00
+
+/* Maximum size of a WR sent from the host, limited by the SGE.
+ *
+ * Note: WR coming from ULP or TP are only limited by CIM.
+ */
+#define FW_WR_SIZE 128
+
+/* Maximum number of outstanding WRs sent from the host. Value must be
+ * programmed in the CTRL/TUNNEL/QP SGE Egress Context and used by
+ * offload modules to limit the number of WRs per connection.
+ */
+#define FW_T3_WR_NUM 16
+#define FW_N3_WR_NUM 7
+
+#ifndef N3
+# define FW_WR_NUM FW_T3_WR_NUM
+#else
+# define FW_WR_NUM FW_N3_WR_NUM
+#endif
+
+/* FW_TUNNEL_NUM corresponds to the number of supported TUNNEL Queues. These
+ * queues must start at SGE Egress Context FW_TUNNEL_SGEEC_START and must
+ * start at 'TID' (or 'uP Token') FW_TUNNEL_TID_START.
+ *
+ * Ingress Traffic (e.g. DMA completion credit) for TUNNEL Queue[i] is sent
+ * to RESP Queue[i].
+ */
+#define FW_TUNNEL_NUM 8
+#define FW_TUNNEL_SGEEC_START 8
+#define FW_TUNNEL_TID_START 65544
+
+/* FW_CTRL_NUM corresponds to the number of supported CTRL Queues. These queues
+ * must start at SGE Egress Context FW_CTRL_SGEEC_START and must start at 'TID'
+ * (or 'uP Token') FW_CTRL_TID_START.
+ *
+ * Ingress Traffic for CTRL Queue[i] is sent to RESP Queue[i].
+ */
+#define FW_CTRL_NUM 8
+#define FW_CTRL_SGEEC_START 65528
+#define FW_CTRL_TID_START 65536
+
+/* FW_OFLD_NUM corresponds to the number of supported OFFLOAD Queues. These
+ * queues must start at SGE Egress Context FW_OFLD_SGEEC_START.
+ *
+ * Note: the 'uP Token' in the SGE Egress Context fields is irrelevant for
+ * OFFLOAD Queues, as the host is responsible for providing the correct TID in
+ * every WR.
+ *
+ * Ingress Trafffic for OFFLOAD Queue[i] is sent to RESP Queue[i].
+ */
+#define FW_OFLD_NUM 8
+#define FW_OFLD_SGEEC_START 0
+
+/*
+ *
+ */
+#define FW_RI_NUM 1
+#define FW_RI_SGEEC_START 65527
+#define FW_RI_TID_START 65552
+
+/*
+ * The RX_PKT_TID
+ */
+#define FW_RX_PKT_NUM 1
+#define FW_RX_PKT_TID_START 65553
+
+/* FW_WRC_NUM corresponds to the number of Work Request Context that supported
+ * by the firmware.
+ */
+#define FW_WRC_NUM \
+ (65536 + FW_TUNNEL_NUM + FW_CTRL_NUM + FW_RI_NUM + FW_RX_PKT_NUM)
+
+/*
+ * FW type and version.
+ */
+#define S_FW_VERSION_TYPE 28
+#define M_FW_VERSION_TYPE 0xF
+#define V_FW_VERSION_TYPE(x) ((x) << S_FW_VERSION_TYPE)
+#define G_FW_VERSION_TYPE(x) \
+ (((x) >> S_FW_VERSION_TYPE) & M_FW_VERSION_TYPE)
+
+#define S_FW_VERSION_MAJOR 16
+#define M_FW_VERSION_MAJOR 0xFFF
+#define V_FW_VERSION_MAJOR(x) ((x) << S_FW_VERSION_MAJOR)
+#define G_FW_VERSION_MAJOR(x) \
+ (((x) >> S_FW_VERSION_MAJOR) & M_FW_VERSION_MAJOR)
+
+#define S_FW_VERSION_MINOR 8
+#define M_FW_VERSION_MINOR 0xFF
+#define V_FW_VERSION_MINOR(x) ((x) << S_FW_VERSION_MINOR)
+#define G_FW_VERSION_MINOR(x) \
+ (((x) >> S_FW_VERSION_MINOR) & M_FW_VERSION_MINOR)
+
+#define S_FW_VERSION_MICRO 0
+#define M_FW_VERSION_MICRO 0xFF
+#define V_FW_VERSION_MICRO(x) ((x) << S_FW_VERSION_MICRO)
+#define G_FW_VERSION_MICRO(x) \
+ (((x) >> S_FW_VERSION_MICRO) & M_FW_VERSION_MICRO)
+
+#endif /* _FIRMWARE_EXPORTS_H_ */
Code Review / kvmfornfv.git / blobdiff