--- /dev/null
+/*****************************************************************************
+ * *
+ * File: mv88x201x.c *
+ * $Revision: 1.12 $ *
+ * $Date: 2005/04/15 19:27:14 $ *
+ * Description: *
+ * Marvell PHY (mv88x201x) functionality. *
+ * part of the Chelsio 10Gb Ethernet Driver. *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License, version 2, as *
+ * published by the Free Software Foundation. *
+ * *
+ * You should have received a copy of the GNU General Public License along *
+ * with this program; if not, see <http://www.gnu.org/licenses/>. *
+ * *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED *
+ * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF *
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. *
+ * *
+ * http://www.chelsio.com *
+ * *
+ * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. *
+ * All rights reserved. *
+ * *
+ * Maintainers: maintainers@chelsio.com *
+ * *
+ * Authors: Dimitrios Michailidis <dm@chelsio.com> *
+ * Tina Yang <tainay@chelsio.com> *
+ * Felix Marti <felix@chelsio.com> *
+ * Scott Bardone <sbardone@chelsio.com> *
+ * Kurt Ottaway <kottaway@chelsio.com> *
+ * Frank DiMambro <frank@chelsio.com> *
+ * *
+ * History: *
+ * *
+ ****************************************************************************/
+
+#include "cphy.h"
+#include "elmer0.h"
+
+/*
+ * The 88x2010 Rev C. requires some link status registers * to be read
+ * twice in order to get the right values. Future * revisions will fix
+ * this problem and then this macro * can disappear.
+ */
+#define MV88x2010_LINK_STATUS_BUGS 1
+
+static int led_init(struct cphy *cphy)
+{
+ /* Setup the LED registers so we can turn on/off.
+ * Writing these bits maps control to another
+ * register. mmd(0x1) addr(0x7)
+ */
+ cphy_mdio_write(cphy, MDIO_MMD_PCS, 0x8304, 0xdddd);
+ return 0;
+}
+
+static int led_link(struct cphy *cphy, u32 do_enable)
+{
+ u32 led = 0;
+#define LINK_ENABLE_BIT 0x1
+
+ cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_CTRL2, &led);
+
+ if (do_enable & LINK_ENABLE_BIT) {
+ led |= LINK_ENABLE_BIT;
+ cphy_mdio_write(cphy, MDIO_MMD_PMAPMD, MDIO_CTRL2, led);
+ } else {
+ led &= ~LINK_ENABLE_BIT;
+ cphy_mdio_write(cphy, MDIO_MMD_PMAPMD, MDIO_CTRL2, led);
+ }
+ return 0;
+}
+
+/* Port Reset */
+static int mv88x201x_reset(struct cphy *cphy, int wait)
+{
+ /* This can be done through registers. It is not required since
+ * a full chip reset is used.
+ */
+ return 0;
+}
+
+static int mv88x201x_interrupt_enable(struct cphy *cphy)
+{
+ /* Enable PHY LASI interrupts. */
+ cphy_mdio_write(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_CTRL,
+ MDIO_PMA_LASI_LSALARM);
+
+ /* Enable Marvell interrupts through Elmer0. */
+ if (t1_is_asic(cphy->adapter)) {
+ u32 elmer;
+
+ t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
+ elmer |= ELMER0_GP_BIT6;
+ t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
+ }
+ return 0;
+}
+
+static int mv88x201x_interrupt_disable(struct cphy *cphy)
+{
+ /* Disable PHY LASI interrupts. */
+ cphy_mdio_write(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_CTRL, 0x0);
+
+ /* Disable Marvell interrupts through Elmer0. */
+ if (t1_is_asic(cphy->adapter)) {
+ u32 elmer;
+
+ t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
+ elmer &= ~ELMER0_GP_BIT6;
+ t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
+ }
+ return 0;
+}
+
+static int mv88x201x_interrupt_clear(struct cphy *cphy)
+{
+ u32 elmer;
+ u32 val;
+
+#ifdef MV88x2010_LINK_STATUS_BUGS
+ /* Required to read twice before clear takes affect. */
+ cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_RXSTAT, &val);
+ cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_TXSTAT, &val);
+ cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_STAT, &val);
+
+ /* Read this register after the others above it else
+ * the register doesn't clear correctly.
+ */
+ cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_STAT1, &val);
+#endif
+
+ /* Clear link status. */
+ cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_STAT1, &val);
+ /* Clear PHY LASI interrupts. */
+ cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_STAT, &val);
+
+#ifdef MV88x2010_LINK_STATUS_BUGS
+ /* Do it again. */
+ cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_RXSTAT, &val);
+ cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_TXSTAT, &val);
+#endif
+
+ /* Clear Marvell interrupts through Elmer0. */
+ if (t1_is_asic(cphy->adapter)) {
+ t1_tpi_read(cphy->adapter, A_ELMER0_INT_CAUSE, &elmer);
+ elmer |= ELMER0_GP_BIT6;
+ t1_tpi_write(cphy->adapter, A_ELMER0_INT_CAUSE, elmer);
+ }
+ return 0;
+}
+
+static int mv88x201x_interrupt_handler(struct cphy *cphy)
+{
+ /* Clear interrupts */
+ mv88x201x_interrupt_clear(cphy);
+
+ /* We have only enabled link change interrupts and so
+ * cphy_cause must be a link change interrupt.
+ */
+ return cphy_cause_link_change;
+}
+
+static int mv88x201x_set_loopback(struct cphy *cphy, int on)
+{
+ return 0;
+}
+
+static int mv88x201x_get_link_status(struct cphy *cphy, int *link_ok,
+ int *speed, int *duplex, int *fc)
+{
+ u32 val = 0;
+
+ if (link_ok) {
+ /* Read link status. */
+ cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_STAT1, &val);
+ val &= MDIO_STAT1_LSTATUS;
+ *link_ok = (val == MDIO_STAT1_LSTATUS);
+ /* Turn on/off Link LED */
+ led_link(cphy, *link_ok);
+ }
+ if (speed)
+ *speed = SPEED_10000;
+ if (duplex)
+ *duplex = DUPLEX_FULL;
+ if (fc)
+ *fc = PAUSE_RX | PAUSE_TX;
+ return 0;
+}
+
+static void mv88x201x_destroy(struct cphy *cphy)
+{
+ kfree(cphy);
+}
+
+static struct cphy_ops mv88x201x_ops = {
+ .destroy = mv88x201x_destroy,
+ .reset = mv88x201x_reset,
+ .interrupt_enable = mv88x201x_interrupt_enable,
+ .interrupt_disable = mv88x201x_interrupt_disable,
+ .interrupt_clear = mv88x201x_interrupt_clear,
+ .interrupt_handler = mv88x201x_interrupt_handler,
+ .get_link_status = mv88x201x_get_link_status,
+ .set_loopback = mv88x201x_set_loopback,
+ .mmds = (MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS |
+ MDIO_DEVS_PHYXS | MDIO_DEVS_WIS),
+};
+
+static struct cphy *mv88x201x_phy_create(struct net_device *dev, int phy_addr,
+ const struct mdio_ops *mdio_ops)
+{
+ u32 val;
+ struct cphy *cphy = kzalloc(sizeof(*cphy), GFP_KERNEL);
+
+ if (!cphy)
+ return NULL;
+
+ cphy_init(cphy, dev, phy_addr, &mv88x201x_ops, mdio_ops);
+
+ /* Commands the PHY to enable XFP's clock. */
+ cphy_mdio_read(cphy, MDIO_MMD_PCS, 0x8300, &val);
+ cphy_mdio_write(cphy, MDIO_MMD_PCS, 0x8300, val | 1);
+
+ /* Clear link status. Required because of a bug in the PHY. */
+ cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_STAT2, &val);
+ cphy_mdio_read(cphy, MDIO_MMD_PCS, MDIO_STAT2, &val);
+
+ /* Allows for Link,Ack LED turn on/off */
+ led_init(cphy);
+ return cphy;
+}
+
+/* Chip Reset */
+static int mv88x201x_phy_reset(adapter_t *adapter)
+{
+ u32 val;
+
+ t1_tpi_read(adapter, A_ELMER0_GPO, &val);
+ val &= ~4;
+ t1_tpi_write(adapter, A_ELMER0_GPO, val);
+ msleep(100);
+
+ t1_tpi_write(adapter, A_ELMER0_GPO, val | 4);
+ msleep(1000);
+
+ /* Now lets enable the Laser. Delay 100us */
+ t1_tpi_read(adapter, A_ELMER0_GPO, &val);
+ val |= 0x8000;
+ t1_tpi_write(adapter, A_ELMER0_GPO, val);
+ udelay(100);
+ return 0;
+}
+
+const struct gphy t1_mv88x201x_ops = {
+ .create = mv88x201x_phy_create,
+ .reset = mv88x201x_phy_reset
+};
Code Review / kvmfornfv.git / blobdiff