Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / drivers / net / ethernet / chelsio / Kconfig

diff --git a/kernel/drivers/net/ethernet/chelsio/Kconfig b/kernel/drivers/net/ethernet/chelsio/Kconfig
new file mode 100644 (file)
index 0000000..7daa088
--- /dev/null
+++ b/kernel/drivers/net/ethernet/chelsio/Kconfig
@@ -0,0 +1,130 @@
+#
+# Chelsio device configuration
+#
+
+config NET_VENDOR_CHELSIO
+       bool "Chelsio devices"
+       default y
+       depends on PCI
+       ---help---
+         If you have a network (Ethernet) card belonging to this class, say Y
+         and read the Ethernet-HOWTO, available from
+         <http://www.tldp.org/docs.html#howto>.
+
+         Note that the answer to this question doesn't directly affect the
+         kernel: saying N will just cause the configurator to skip all
+         the questions about Chelsio devices. If you say Y, you will be asked for
+         your specific card in the following questions.
+
+if NET_VENDOR_CHELSIO
+
+config CHELSIO_T1
+       tristate "Chelsio 10Gb Ethernet support"
+       depends on PCI
+       select CRC32
+       select MDIO
+       ---help---
+         This driver supports Chelsio gigabit and 10-gigabit
+         Ethernet cards. More information about adapter features and
+         performance tuning is in <file:Documentation/networking/cxgb.txt>.
+
+         For general information about Chelsio and our products, visit
+         our website at <http://www.chelsio.com>.
+
+         For customer support, please visit our customer support page at
+         <http://www.chelsio.com/support.html>.
+
+         Please send feedback to <linux-bugs@chelsio.com>.
+
+         To compile this driver as a module, choose M here: the module
+         will be called cxgb.
+
+config CHELSIO_T1_1G
+       bool "Chelsio gigabit Ethernet support"
+       depends on CHELSIO_T1
+       ---help---
+         Enables support for Chelsio's gigabit Ethernet PCI cards.  If you
+         are using only 10G cards say 'N' here.
+
+config CHELSIO_T3
+       tristate "Chelsio Communications T3 10Gb Ethernet support"
+       depends on PCI && INET
+       select FW_LOADER
+       select MDIO
+       ---help---
+         This driver supports Chelsio T3-based gigabit and 10Gb Ethernet
+         adapters.
+
+         For general information about Chelsio and our products, visit
+         our website at <http://www.chelsio.com>.
+
+         For customer support, please visit our customer support page at
+         <http://www.chelsio.com/support.html>.
+
+         Please send feedback to <linux-bugs@chelsio.com>.
+
+         To compile this driver as a module, choose M here: the module
+         will be called cxgb3.
+
+config CHELSIO_T4
+       tristate "Chelsio Communications T4/T5 Ethernet support"
+       depends on PCI && (IPV6 || IPV6=n)
+       select FW_LOADER
+       select MDIO
+       ---help---
+         This driver supports Chelsio T4 and T5 based gigabit, 10Gb Ethernet
+         adapter and T5 based 40Gb Ethernet adapter.
+
+         For general information about Chelsio and our products, visit
+         our website at <http://www.chelsio.com>.
+
+         For customer support, please visit our customer support page at
+         <http://www.chelsio.com/support.html>.
+
+         Please send feedback to <linux-bugs@chelsio.com>.
+
+         To compile this driver as a module choose M here; the module
+         will be called cxgb4.
+
+config CHELSIO_T4_DCB
+       bool "Data Center Bridging (DCB) Support for Chelsio T4/T5 cards"
+       default n
+       depends on CHELSIO_T4 && DCB
+       ---help---
+         Enable DCB support through rtNetlink interface.
+         Say Y here if you want to enable Data Center Bridging (DCB) support
+         in the driver.
+
+         If unsure, say N.
+
+config CHELSIO_T4_FCOE
+       bool "Fibre Channel over Ethernet (FCoE) Support for Chelsio T5 cards"
+       default n
+       depends on CHELSIO_T4 && CHELSIO_T4_DCB && FCOE
+       ---help---
+         Enable FCoE offload features.
+         Say Y here if you want to enable Fibre Channel over Ethernet (FCoE) support
+         in the driver.
+
+         If unsure, say N.
+
+config CHELSIO_T4VF
+       tristate "Chelsio Communications T4/T5 Virtual Function Ethernet support"
+       depends on PCI
+       ---help---
+         This driver supports Chelsio T4 and T5 based gigabit, 10Gb Ethernet
+         adapters and T5 based 40Gb Ethernet adapters with PCI-E SR-IOV Virtual
+         Functions.
+
+         For general information about Chelsio and our products, visit
+         our website at <http://www.chelsio.com>.
+
+         For customer support, please visit our customer support page at
+         <http://www.chelsio.com/support.html>.
+
+         Please send feedback to <linux-bugs@chelsio.com>.
+
+         To compile this driver as a module choose M here; the module
+         will be called cxgb4vf.
+
+endif # NET_VENDOR_CHELSIO