--- /dev/null
+#ifndef _NB8800_H_
+#define _NB8800_H_
+
+#include <linux/types.h>
+#include <linux/skbuff.h>
+#include <linux/phy.h>
+#include <linux/clk.h>
+#include <linux/bitops.h>
+
+#define RX_DESC_COUNT 256
+#define TX_DESC_COUNT 256
+
+#define NB8800_DESC_LOW 4
+
+#define RX_BUF_SIZE 1552
+
+#define RX_COPYBREAK 256
+#define RX_COPYHDR 128
+
+#define MAX_MDC_CLOCK 2500000
+
+/* Stargate Solutions SSN8800 core registers */
+#define NB8800_TX_CTL1 0x000
+#define TX_TPD BIT(5)
+#define TX_APPEND_FCS BIT(4)
+#define TX_PAD_EN BIT(3)
+#define TX_RETRY_EN BIT(2)
+#define TX_EN BIT(0)
+
+#define NB8800_TX_CTL2 0x001
+
+#define NB8800_RX_CTL 0x004
+#define RX_BC_DISABLE BIT(7)
+#define RX_RUNT BIT(6)
+#define RX_AF_EN BIT(5)
+#define RX_PAUSE_EN BIT(3)
+#define RX_SEND_CRC BIT(2)
+#define RX_PAD_STRIP BIT(1)
+#define RX_EN BIT(0)
+
+#define NB8800_RANDOM_SEED 0x008
+#define NB8800_TX_SDP 0x14
+#define NB8800_TX_TPDP1 0x18
+#define NB8800_TX_TPDP2 0x19
+#define NB8800_SLOT_TIME 0x1c
+
+#define NB8800_MDIO_CMD 0x020
+#define MDIO_CMD_GO BIT(31)
+#define MDIO_CMD_WR BIT(26)
+#define MDIO_CMD_ADDR(x) ((x) << 21)
+#define MDIO_CMD_REG(x) ((x) << 16)
+#define MDIO_CMD_DATA(x) ((x) << 0)
+
+#define NB8800_MDIO_STS 0x024
+#define MDIO_STS_ERR BIT(31)
+
+#define NB8800_MC_ADDR(i) (0x028 + (i))
+#define NB8800_MC_INIT 0x02e
+#define NB8800_UC_ADDR(i) (0x03c + (i))
+
+#define NB8800_MAC_MODE 0x044
+#define RGMII_MODE BIT(7)
+#define HALF_DUPLEX BIT(4)
+#define BURST_EN BIT(3)
+#define LOOPBACK_EN BIT(2)
+#define GMAC_MODE BIT(0)
+
+#define NB8800_IC_THRESHOLD 0x050
+#define NB8800_PE_THRESHOLD 0x051
+#define NB8800_PF_THRESHOLD 0x052
+#define NB8800_TX_BUFSIZE 0x054
+#define NB8800_FIFO_CTL 0x056
+#define NB8800_PQ1 0x060
+#define NB8800_PQ2 0x061
+#define NB8800_SRC_ADDR(i) (0x06a + (i))
+#define NB8800_STAT_DATA 0x078
+#define NB8800_STAT_INDEX 0x07c
+#define NB8800_STAT_CLEAR 0x07d
+
+#define NB8800_SLEEP_MODE 0x07e
+#define SLEEP_MODE BIT(0)
+
+#define NB8800_WAKEUP 0x07f
+#define WAKEUP BIT(0)
+
+/* Aurora NB8800 host interface registers */
+#define NB8800_TXC_CR 0x100
+#define TCR_LK BIT(12)
+#define TCR_DS BIT(11)
+#define TCR_BTS(x) (((x) & 0x7) << 8)
+#define TCR_DIE BIT(7)
+#define TCR_TFI(x) (((x) & 0x7) << 4)
+#define TCR_LE BIT(3)
+#define TCR_RS BIT(2)
+#define TCR_DM BIT(1)
+#define TCR_EN BIT(0)
+
+#define NB8800_TXC_SR 0x104
+#define TSR_DE BIT(3)
+#define TSR_DI BIT(2)
+#define TSR_TO BIT(1)
+#define TSR_TI BIT(0)
+
+#define NB8800_TX_SAR 0x108
+#define NB8800_TX_DESC_ADDR 0x10c
+
+#define NB8800_TX_REPORT_ADDR 0x110
+#define TX_BYTES_TRANSFERRED(x) (((x) >> 16) & 0xffff)
+#define TX_FIRST_DEFERRAL BIT(7)
+#define TX_EARLY_COLLISIONS(x) (((x) >> 3) & 0xf)
+#define TX_LATE_COLLISION BIT(2)
+#define TX_PACKET_DROPPED BIT(1)
+#define TX_FIFO_UNDERRUN BIT(0)
+#define IS_TX_ERROR(r) ((r) & 0x07)
+
+#define NB8800_TX_FIFO_SR 0x114
+#define NB8800_TX_ITR 0x118
+
+#define NB8800_RXC_CR 0x200
+#define RCR_FL BIT(13)
+#define RCR_LK BIT(12)
+#define RCR_DS BIT(11)
+#define RCR_BTS(x) (((x) & 7) << 8)
+#define RCR_DIE BIT(7)
+#define RCR_RFI(x) (((x) & 7) << 4)
+#define RCR_LE BIT(3)
+#define RCR_RS BIT(2)
+#define RCR_DM BIT(1)
+#define RCR_EN BIT(0)
+
+#define NB8800_RXC_SR 0x204
+#define RSR_DE BIT(3)
+#define RSR_DI BIT(2)
+#define RSR_RO BIT(1)
+#define RSR_RI BIT(0)
+
+#define NB8800_RX_SAR 0x208
+#define NB8800_RX_DESC_ADDR 0x20c
+
+#define NB8800_RX_REPORT_ADDR 0x210
+#define RX_BYTES_TRANSFERRED(x) (((x) >> 16) & 0xFFFF)
+#define RX_MULTICAST_PKT BIT(9)
+#define RX_BROADCAST_PKT BIT(8)
+#define RX_LENGTH_ERR BIT(7)
+#define RX_FCS_ERR BIT(6)
+#define RX_RUNT_PKT BIT(5)
+#define RX_FIFO_OVERRUN BIT(4)
+#define RX_LATE_COLLISION BIT(3)
+#define RX_ALIGNMENT_ERROR BIT(2)
+#define RX_ERROR_MASK 0xfc
+#define IS_RX_ERROR(r) ((r) & RX_ERROR_MASK)
+
+#define NB8800_RX_FIFO_SR 0x214
+#define NB8800_RX_ITR 0x218
+
+/* Sigma Designs SMP86xx additional registers */
+#define NB8800_TANGOX_PAD_MODE 0x400
+#define PAD_MODE_MASK 0x7
+#define PAD_MODE_MII 0x0
+#define PAD_MODE_RGMII 0x1
+#define PAD_MODE_GTX_CLK_INV BIT(3)
+#define PAD_MODE_GTX_CLK_DELAY BIT(4)
+
+#define NB8800_TANGOX_MDIO_CLKDIV 0x420
+#define NB8800_TANGOX_RESET 0x424
+
+/* Hardware DMA descriptor */
+struct nb8800_dma_desc {
+ u32 s_addr; /* start address */
+ u32 n_addr; /* next descriptor address */
+ u32 r_addr; /* report address */
+ u32 config;
+} __aligned(8);
+
+#define DESC_ID BIT(23)
+#define DESC_EOC BIT(22)
+#define DESC_EOF BIT(21)
+#define DESC_LK BIT(20)
+#define DESC_DS BIT(19)
+#define DESC_BTS(x) (((x) & 0x7) << 16)
+
+/* DMA descriptor and associated data for rx.
+ * Allocated from coherent memory.
+ */
+struct nb8800_rx_desc {
+ /* DMA descriptor */
+ struct nb8800_dma_desc desc;
+
+ /* Status report filled in by hardware */
+ u32 report;
+};
+
+/* Address of buffer on rx ring */
+struct nb8800_rx_buf {
+ struct page *page;
+ unsigned long offset;
+};
+
+/* DMA descriptors and associated data for tx.
+ * Allocated from coherent memory.
+ */
+struct nb8800_tx_desc {
+ /* DMA descriptor. The second descriptor is used if packet
+ * data is unaligned.
+ */
+ struct nb8800_dma_desc desc[2];
+
+ /* Status report filled in by hardware */
+ u32 report;
+
+ /* Bounce buffer for initial unaligned part of packet */
+ u8 buf[8] __aligned(8);
+};
+
+/* Packet in tx queue */
+struct nb8800_tx_buf {
+ /* Currently queued skb */
+ struct sk_buff *skb;
+
+ /* DMA address of the first descriptor */
+ dma_addr_t dma_desc;
+
+ /* DMA address of packet data */
+ dma_addr_t dma_addr;
+
+ /* Length of DMA mapping, less than skb->len if alignment
+ * buffer is used.
+ */
+ unsigned int dma_len;
+
+ /* Number of packets in chain starting here */
+ unsigned int chain_len;
+
+ /* Packet chain ready to be submitted to hardware */
+ bool ready;
+};
+
+struct nb8800_priv {
+ struct napi_struct napi;
+
+ void __iomem *base;
+
+ /* RX DMA descriptors */
+ struct nb8800_rx_desc *rx_descs;
+
+ /* RX buffers referenced by DMA descriptors */
+ struct nb8800_rx_buf *rx_bufs;
+
+ /* Current end of chain */
+ u32 rx_eoc;
+
+ /* Value for rx interrupt time register in NAPI interrupt mode */
+ u32 rx_itr_irq;
+
+ /* Value for rx interrupt time register in NAPI poll mode */
+ u32 rx_itr_poll;
+
+ /* Value for config field of rx DMA descriptors */
+ u32 rx_dma_config;
+
+ /* TX DMA descriptors */
+ struct nb8800_tx_desc *tx_descs;
+
+ /* TX packet queue */
+ struct nb8800_tx_buf *tx_bufs;
+
+ /* Number of free tx queue entries */
+ atomic_t tx_free;
+
+ /* First free tx queue entry */
+ u32 tx_next;
+
+ /* Next buffer to transmit */
+ u32 tx_queue;
+
+ /* Start of current packet chain */
+ struct nb8800_tx_buf *tx_chain;
+
+ /* Next buffer to reclaim */
+ u32 tx_done;
+
+ /* Lock for DMA activation */
+ spinlock_t tx_lock;
+
+ struct mii_bus *mii_bus;
+ struct device_node *phy_node;
+ struct phy_device *phydev;
+
+ /* PHY connection type from DT */
+ int phy_mode;
+
+ /* Current link status */
+ int speed;
+ int duplex;
+ int link;
+
+ /* Pause settings */
+ bool pause_aneg;
+ bool pause_rx;
+ bool pause_tx;
+
+ /* DMA base address of rx descriptors, see rx_descs above */
+ dma_addr_t rx_desc_dma;
+
+ /* DMA base address of tx descriptors, see tx_descs above */
+ dma_addr_t tx_desc_dma;
+
+ struct clk *clk;
+};
+
+struct nb8800_ops {
+ int (*init)(struct net_device *dev);
+ int (*reset)(struct net_device *dev);
+};
+
+#endif /* _NB8800_H_ */
Code Review / kvmfornfv.git / blobdiff