--- /dev/null
+/*
+ *
+ * Alchemy Au1x00 ethernet driver
+ *
+ * Copyright 2001-2003, 2006 MontaVista Software Inc.
+ * Copyright 2002 TimeSys Corp.
+ * Added ethtool/mii-tool support,
+ * Copyright 2004 Matt Porter <mporter@kernel.crashing.org>
+ * Update: 2004 Bjoern Riemer, riemer@fokus.fraunhofer.de
+ * or riemer@riemer-nt.de: fixed the link beat detection with
+ * ioctls (SIOCGMIIPHY)
+ * Copyright 2006 Herbert Valerio Riedel <hvr@gnu.org>
+ * converted to use linux-2.6.x's PHY framework
+ *
+ * Author: MontaVista Software, Inc.
+ * ppopov@mvista.com or source@mvista.com
+ *
+ * ########################################################################
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * ########################################################################
+ *
+ *
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/capability.h>
+#include <linux/dma-mapping.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/errno.h>
+#include <linux/in.h>
+#include <linux/ioport.h>
+#include <linux/bitops.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/crc32.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/cpu.h>
+#include <linux/io.h>
+
+#include <asm/mipsregs.h>
+#include <asm/irq.h>
+#include <asm/processor.h>
+
+#include <au1000.h>
+#include <au1xxx_eth.h>
+#include <prom.h>
+
+#include "au1000_eth.h"
+
+#ifdef AU1000_ETH_DEBUG
+static int au1000_debug = 5;
+#else
+static int au1000_debug = 3;
+#endif
+
+#define AU1000_DEF_MSG_ENABLE (NETIF_MSG_DRV | \
+ NETIF_MSG_PROBE | \
+ NETIF_MSG_LINK)
+
+#define DRV_NAME "au1000_eth"
+#define DRV_VERSION "1.7"
+#define DRV_AUTHOR "Pete Popov <ppopov@embeddedalley.com>"
+#define DRV_DESC "Au1xxx on-chip Ethernet driver"
+
+MODULE_AUTHOR(DRV_AUTHOR);
+MODULE_DESCRIPTION(DRV_DESC);
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+/* AU1000 MAC registers and bits */
+#define MAC_CONTROL 0x0
+# define MAC_RX_ENABLE (1 << 2)
+# define MAC_TX_ENABLE (1 << 3)
+# define MAC_DEF_CHECK (1 << 5)
+# define MAC_SET_BL(X) (((X) & 0x3) << 6)
+# define MAC_AUTO_PAD (1 << 8)
+# define MAC_DISABLE_RETRY (1 << 10)
+# define MAC_DISABLE_BCAST (1 << 11)
+# define MAC_LATE_COL (1 << 12)
+# define MAC_HASH_MODE (1 << 13)
+# define MAC_HASH_ONLY (1 << 15)
+# define MAC_PASS_ALL (1 << 16)
+# define MAC_INVERSE_FILTER (1 << 17)
+# define MAC_PROMISCUOUS (1 << 18)
+# define MAC_PASS_ALL_MULTI (1 << 19)
+# define MAC_FULL_DUPLEX (1 << 20)
+# define MAC_NORMAL_MODE 0
+# define MAC_INT_LOOPBACK (1 << 21)
+# define MAC_EXT_LOOPBACK (1 << 22)
+# define MAC_DISABLE_RX_OWN (1 << 23)
+# define MAC_BIG_ENDIAN (1 << 30)
+# define MAC_RX_ALL (1 << 31)
+#define MAC_ADDRESS_HIGH 0x4
+#define MAC_ADDRESS_LOW 0x8
+#define MAC_MCAST_HIGH 0xC
+#define MAC_MCAST_LOW 0x10
+#define MAC_MII_CNTRL 0x14
+# define MAC_MII_BUSY (1 << 0)
+# define MAC_MII_READ 0
+# define MAC_MII_WRITE (1 << 1)
+# define MAC_SET_MII_SELECT_REG(X) (((X) & 0x1f) << 6)
+# define MAC_SET_MII_SELECT_PHY(X) (((X) & 0x1f) << 11)
+#define MAC_MII_DATA 0x18
+#define MAC_FLOW_CNTRL 0x1C
+# define MAC_FLOW_CNTRL_BUSY (1 << 0)
+# define MAC_FLOW_CNTRL_ENABLE (1 << 1)
+# define MAC_PASS_CONTROL (1 << 2)
+# define MAC_SET_PAUSE(X) (((X) & 0xffff) << 16)
+#define MAC_VLAN1_TAG 0x20
+#define MAC_VLAN2_TAG 0x24
+
+/* Ethernet Controller Enable */
+# define MAC_EN_CLOCK_ENABLE (1 << 0)
+# define MAC_EN_RESET0 (1 << 1)
+# define MAC_EN_TOSS (0 << 2)
+# define MAC_EN_CACHEABLE (1 << 3)
+# define MAC_EN_RESET1 (1 << 4)
+# define MAC_EN_RESET2 (1 << 5)
+# define MAC_DMA_RESET (1 << 6)
+
+/* Ethernet Controller DMA Channels */
+/* offsets from MAC_TX_RING_ADDR address */
+#define MAC_TX_BUFF0_STATUS 0x0
+# define TX_FRAME_ABORTED (1 << 0)
+# define TX_JAB_TIMEOUT (1 << 1)
+# define TX_NO_CARRIER (1 << 2)
+# define TX_LOSS_CARRIER (1 << 3)
+# define TX_EXC_DEF (1 << 4)
+# define TX_LATE_COLL_ABORT (1 << 5)
+# define TX_EXC_COLL (1 << 6)
+# define TX_UNDERRUN (1 << 7)
+# define TX_DEFERRED (1 << 8)
+# define TX_LATE_COLL (1 << 9)
+# define TX_COLL_CNT_MASK (0xF << 10)
+# define TX_PKT_RETRY (1 << 31)
+#define MAC_TX_BUFF0_ADDR 0x4
+# define TX_DMA_ENABLE (1 << 0)
+# define TX_T_DONE (1 << 1)
+# define TX_GET_DMA_BUFFER(X) (((X) >> 2) & 0x3)
+#define MAC_TX_BUFF0_LEN 0x8
+#define MAC_TX_BUFF1_STATUS 0x10
+#define MAC_TX_BUFF1_ADDR 0x14
+#define MAC_TX_BUFF1_LEN 0x18
+#define MAC_TX_BUFF2_STATUS 0x20
+#define MAC_TX_BUFF2_ADDR 0x24
+#define MAC_TX_BUFF2_LEN 0x28
+#define MAC_TX_BUFF3_STATUS 0x30
+#define MAC_TX_BUFF3_ADDR 0x34
+#define MAC_TX_BUFF3_LEN 0x38
+
+/* offsets from MAC_RX_RING_ADDR */
+#define MAC_RX_BUFF0_STATUS 0x0
+# define RX_FRAME_LEN_MASK 0x3fff
+# define RX_WDOG_TIMER (1 << 14)
+# define RX_RUNT (1 << 15)
+# define RX_OVERLEN (1 << 16)
+# define RX_COLL (1 << 17)
+# define RX_ETHER (1 << 18)
+# define RX_MII_ERROR (1 << 19)
+# define RX_DRIBBLING (1 << 20)
+# define RX_CRC_ERROR (1 << 21)
+# define RX_VLAN1 (1 << 22)
+# define RX_VLAN2 (1 << 23)
+# define RX_LEN_ERROR (1 << 24)
+# define RX_CNTRL_FRAME (1 << 25)
+# define RX_U_CNTRL_FRAME (1 << 26)
+# define RX_MCAST_FRAME (1 << 27)
+# define RX_BCAST_FRAME (1 << 28)
+# define RX_FILTER_FAIL (1 << 29)
+# define RX_PACKET_FILTER (1 << 30)
+# define RX_MISSED_FRAME (1 << 31)
+
+# define RX_ERROR (RX_WDOG_TIMER | RX_RUNT | RX_OVERLEN | \
+ RX_COLL | RX_MII_ERROR | RX_CRC_ERROR | \
+ RX_LEN_ERROR | RX_U_CNTRL_FRAME | RX_MISSED_FRAME)
+#define MAC_RX_BUFF0_ADDR 0x4
+# define RX_DMA_ENABLE (1 << 0)
+# define RX_T_DONE (1 << 1)
+# define RX_GET_DMA_BUFFER(X) (((X) >> 2) & 0x3)
+# define RX_SET_BUFF_ADDR(X) ((X) & 0xffffffc0)
+#define MAC_RX_BUFF1_STATUS 0x10
+#define MAC_RX_BUFF1_ADDR 0x14
+#define MAC_RX_BUFF2_STATUS 0x20
+#define MAC_RX_BUFF2_ADDR 0x24
+#define MAC_RX_BUFF3_STATUS 0x30
+#define MAC_RX_BUFF3_ADDR 0x34
+
+/*
+ * Theory of operation
+ *
+ * The Au1000 MACs use a simple rx and tx descriptor ring scheme.
+ * There are four receive and four transmit descriptors. These
+ * descriptors are not in memory; rather, they are just a set of
+ * hardware registers.
+ *
+ * Since the Au1000 has a coherent data cache, the receive and
+ * transmit buffers are allocated from the KSEG0 segment. The
+ * hardware registers, however, are still mapped at KSEG1 to
+ * make sure there's no out-of-order writes, and that all writes
+ * complete immediately.
+ */
+
+/*
+ * board-specific configurations
+ *
+ * PHY detection algorithm
+ *
+ * If phy_static_config is undefined, the PHY setup is
+ * autodetected:
+ *
+ * mii_probe() first searches the current MAC's MII bus for a PHY,
+ * selecting the first (or last, if phy_search_highest_addr is
+ * defined) PHY address not already claimed by another netdev.
+ *
+ * If nothing was found that way when searching for the 2nd ethernet
+ * controller's PHY and phy1_search_mac0 is defined, then
+ * the first MII bus is searched as well for an unclaimed PHY; this is
+ * needed in case of a dual-PHY accessible only through the MAC0's MII
+ * bus.
+ *
+ * Finally, if no PHY is found, then the corresponding ethernet
+ * controller is not registered to the network subsystem.
+ */
+
+/* autodetection defaults: phy1_search_mac0 */
+
+/* static PHY setup
+ *
+ * most boards PHY setup should be detectable properly with the
+ * autodetection algorithm in mii_probe(), but in some cases (e.g. if
+ * you have a switch attached, or want to use the PHY's interrupt
+ * notification capabilities) you can provide a static PHY
+ * configuration here
+ *
+ * IRQs may only be set, if a PHY address was configured
+ * If a PHY address is given, also a bus id is required to be set
+ *
+ * ps: make sure the used irqs are configured properly in the board
+ * specific irq-map
+ */
+
+static void au1000_enable_mac(struct net_device *dev, int force_reset)
+{
+ unsigned long flags;
+ struct au1000_private *aup = netdev_priv(dev);
+
+ spin_lock_irqsave(&aup->lock, flags);
+
+ if (force_reset || (!aup->mac_enabled)) {
+ writel(MAC_EN_CLOCK_ENABLE, aup->enable);
+ wmb(); /* drain writebuffer */
+ mdelay(2);
+ writel((MAC_EN_RESET0 | MAC_EN_RESET1 | MAC_EN_RESET2
+ | MAC_EN_CLOCK_ENABLE), aup->enable);
+ wmb(); /* drain writebuffer */
+ mdelay(2);
+
+ aup->mac_enabled = 1;
+ }
+
+ spin_unlock_irqrestore(&aup->lock, flags);
+}
+
+/*
+ * MII operations
+ */
+static int au1000_mdio_read(struct net_device *dev, int phy_addr, int reg)
+{
+ struct au1000_private *aup = netdev_priv(dev);
+ u32 *const mii_control_reg = &aup->mac->mii_control;
+ u32 *const mii_data_reg = &aup->mac->mii_data;
+ u32 timedout = 20;
+ u32 mii_control;
+
+ while (readl(mii_control_reg) & MAC_MII_BUSY) {
+ mdelay(1);
+ if (--timedout == 0) {
+ netdev_err(dev, "read_MII busy timeout!!\n");
+ return -1;
+ }
+ }
+
+ mii_control = MAC_SET_MII_SELECT_REG(reg) |
+ MAC_SET_MII_SELECT_PHY(phy_addr) | MAC_MII_READ;
+
+ writel(mii_control, mii_control_reg);
+
+ timedout = 20;
+ while (readl(mii_control_reg) & MAC_MII_BUSY) {
+ mdelay(1);
+ if (--timedout == 0) {
+ netdev_err(dev, "mdio_read busy timeout!!\n");
+ return -1;
+ }
+ }
+ return readl(mii_data_reg);
+}
+
+static void au1000_mdio_write(struct net_device *dev, int phy_addr,
+ int reg, u16 value)
+{
+ struct au1000_private *aup = netdev_priv(dev);
+ u32 *const mii_control_reg = &aup->mac->mii_control;
+ u32 *const mii_data_reg = &aup->mac->mii_data;
+ u32 timedout = 20;
+ u32 mii_control;
+
+ while (readl(mii_control_reg) & MAC_MII_BUSY) {
+ mdelay(1);
+ if (--timedout == 0) {
+ netdev_err(dev, "mdio_write busy timeout!!\n");
+ return;
+ }
+ }
+
+ mii_control = MAC_SET_MII_SELECT_REG(reg) |
+ MAC_SET_MII_SELECT_PHY(phy_addr) | MAC_MII_WRITE;
+
+ writel(value, mii_data_reg);
+ writel(mii_control, mii_control_reg);
+}
+
+static int au1000_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
+{
+ /* WARNING: bus->phy_map[phy_addr].attached_dev == dev does
+ * _NOT_ hold (e.g. when PHY is accessed through other MAC's MII bus)
+ */
+ struct net_device *const dev = bus->priv;
+
+ /* make sure the MAC associated with this
+ * mii_bus is enabled
+ */
+ au1000_enable_mac(dev, 0);
+
+ return au1000_mdio_read(dev, phy_addr, regnum);
+}
+
+static int au1000_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum,
+ u16 value)
+{
+ struct net_device *const dev = bus->priv;
+
+ /* make sure the MAC associated with this
+ * mii_bus is enabled
+ */
+ au1000_enable_mac(dev, 0);
+
+ au1000_mdio_write(dev, phy_addr, regnum, value);
+ return 0;
+}
+
+static int au1000_mdiobus_reset(struct mii_bus *bus)
+{
+ struct net_device *const dev = bus->priv;
+
+ /* make sure the MAC associated with this
+ * mii_bus is enabled
+ */
+ au1000_enable_mac(dev, 0);
+
+ return 0;
+}
+
+static void au1000_hard_stop(struct net_device *dev)
+{
+ struct au1000_private *aup = netdev_priv(dev);
+ u32 reg;
+
+ netif_dbg(aup, drv, dev, "hard stop\n");
+
+ reg = readl(&aup->mac->control);
+ reg &= ~(MAC_RX_ENABLE | MAC_TX_ENABLE);
+ writel(reg, &aup->mac->control);
+ wmb(); /* drain writebuffer */
+ mdelay(10);
+}
+
+static void au1000_enable_rx_tx(struct net_device *dev)
+{
+ struct au1000_private *aup = netdev_priv(dev);
+ u32 reg;
+
+ netif_dbg(aup, hw, dev, "enable_rx_tx\n");
+
+ reg = readl(&aup->mac->control);
+ reg |= (MAC_RX_ENABLE | MAC_TX_ENABLE);
+ writel(reg, &aup->mac->control);
+ wmb(); /* drain writebuffer */
+ mdelay(10);
+}
+
+static void
+au1000_adjust_link(struct net_device *dev)
+{
+ struct au1000_private *aup = netdev_priv(dev);
+ struct phy_device *phydev = aup->phy_dev;
+ unsigned long flags;
+ u32 reg;
+
+ int status_change = 0;
+
+ BUG_ON(!aup->phy_dev);
+
+ spin_lock_irqsave(&aup->lock, flags);
+
+ if (phydev->link && (aup->old_speed != phydev->speed)) {
+ /* speed changed */
+
+ switch (phydev->speed) {
+ case SPEED_10:
+ case SPEED_100:
+ break;
+ default:
+ netdev_warn(dev, "Speed (%d) is not 10/100 ???\n",
+ phydev->speed);
+ break;
+ }
+
+ aup->old_speed = phydev->speed;
+
+ status_change = 1;
+ }
+
+ if (phydev->link && (aup->old_duplex != phydev->duplex)) {
+ /* duplex mode changed */
+
+ /* switching duplex mode requires to disable rx and tx! */
+ au1000_hard_stop(dev);
+
+ reg = readl(&aup->mac->control);
+ if (DUPLEX_FULL == phydev->duplex) {
+ reg |= MAC_FULL_DUPLEX;
+ reg &= ~MAC_DISABLE_RX_OWN;
+ } else {
+ reg &= ~MAC_FULL_DUPLEX;
+ reg |= MAC_DISABLE_RX_OWN;
+ }
+ writel(reg, &aup->mac->control);
+ wmb(); /* drain writebuffer */
+ mdelay(1);
+
+ au1000_enable_rx_tx(dev);
+ aup->old_duplex = phydev->duplex;
+
+ status_change = 1;
+ }
+
+ if (phydev->link != aup->old_link) {
+ /* link state changed */
+
+ if (!phydev->link) {
+ /* link went down */
+ aup->old_speed = 0;
+ aup->old_duplex = -1;
+ }
+
+ aup->old_link = phydev->link;
+ status_change = 1;
+ }
+
+ spin_unlock_irqrestore(&aup->lock, flags);
+
+ if (status_change) {
+ if (phydev->link)
+ netdev_info(dev, "link up (%d/%s)\n",
+ phydev->speed,
+ DUPLEX_FULL == phydev->duplex ? "Full" : "Half");
+ else
+ netdev_info(dev, "link down\n");
+ }
+}
+
+static int au1000_mii_probe(struct net_device *dev)
+{
+ struct au1000_private *const aup = netdev_priv(dev);
+ struct phy_device *phydev = NULL;
+ int phy_addr;
+
+ if (aup->phy_static_config) {
+ BUG_ON(aup->mac_id < 0 || aup->mac_id > 1);
+
+ if (aup->phy_addr)
+ phydev = aup->mii_bus->phy_map[aup->phy_addr];
+ else
+ netdev_info(dev, "using PHY-less setup\n");
+ return 0;
+ }
+
+ /* find the first (lowest address) PHY
+ * on the current MAC's MII bus
+ */
+ for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++)
+ if (aup->mii_bus->phy_map[phy_addr]) {
+ phydev = aup->mii_bus->phy_map[phy_addr];
+ if (!aup->phy_search_highest_addr)
+ /* break out with first one found */
+ break;
+ }
+
+ if (aup->phy1_search_mac0) {
+ /* try harder to find a PHY */
+ if (!phydev && (aup->mac_id == 1)) {
+ /* no PHY found, maybe we have a dual PHY? */
+ dev_info(&dev->dev, ": no PHY found on MAC1, "
+ "let's see if it's attached to MAC0...\n");
+
+ /* find the first (lowest address) non-attached
+ * PHY on the MAC0 MII bus
+ */
+ for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
+ struct phy_device *const tmp_phydev =
+ aup->mii_bus->phy_map[phy_addr];
+
+ if (aup->mac_id == 1)
+ break;
+
+ /* no PHY here... */
+ if (!tmp_phydev)
+ continue;
+
+ /* already claimed by MAC0 */
+ if (tmp_phydev->attached_dev)
+ continue;
+
+ phydev = tmp_phydev;
+ break; /* found it */
+ }
+ }
+ }
+
+ if (!phydev) {
+ netdev_err(dev, "no PHY found\n");
+ return -1;
+ }
+
+ /* now we are supposed to have a proper phydev, to attach to... */
+ BUG_ON(phydev->attached_dev);
+
+ phydev = phy_connect(dev, dev_name(&phydev->dev),
+ &au1000_adjust_link, PHY_INTERFACE_MODE_MII);
+
+ if (IS_ERR(phydev)) {
+ netdev_err(dev, "Could not attach to PHY\n");
+ return PTR_ERR(phydev);
+ }
+
+ /* mask with MAC supported features */
+ phydev->supported &= (SUPPORTED_10baseT_Half
+ | SUPPORTED_10baseT_Full
+ | SUPPORTED_100baseT_Half
+ | SUPPORTED_100baseT_Full
+ | SUPPORTED_Autoneg
+ /* | SUPPORTED_Pause | SUPPORTED_Asym_Pause */
+ | SUPPORTED_MII
+ | SUPPORTED_TP);
+
+ phydev->advertising = phydev->supported;
+
+ aup->old_link = 0;
+ aup->old_speed = 0;
+ aup->old_duplex = -1;
+ aup->phy_dev = phydev;
+
+ netdev_info(dev, "attached PHY driver [%s] "
+ "(mii_bus:phy_addr=%s, irq=%d)\n",
+ phydev->drv->name, dev_name(&phydev->dev), phydev->irq);
+
+ return 0;
+}
+
+
+/*
+ * Buffer allocation/deallocation routines. The buffer descriptor returned
+ * has the virtual and dma address of a buffer suitable for
+ * both, receive and transmit operations.
+ */
+static struct db_dest *au1000_GetFreeDB(struct au1000_private *aup)
+{
+ struct db_dest *pDB;
+ pDB = aup->pDBfree;
+
+ if (pDB)
+ aup->pDBfree = pDB->pnext;
+
+ return pDB;
+}
+
+void au1000_ReleaseDB(struct au1000_private *aup, struct db_dest *pDB)
+{
+ struct db_dest *pDBfree = aup->pDBfree;
+ if (pDBfree)
+ pDBfree->pnext = pDB;
+ aup->pDBfree = pDB;
+}
+
+static void au1000_reset_mac_unlocked(struct net_device *dev)
+{
+ struct au1000_private *const aup = netdev_priv(dev);
+ int i;
+
+ au1000_hard_stop(dev);
+
+ writel(MAC_EN_CLOCK_ENABLE, aup->enable);
+ wmb(); /* drain writebuffer */
+ mdelay(2);
+ writel(0, aup->enable);
+ wmb(); /* drain writebuffer */
+ mdelay(2);
+
+ aup->tx_full = 0;
+ for (i = 0; i < NUM_RX_DMA; i++) {
+ /* reset control bits */
+ aup->rx_dma_ring[i]->buff_stat &= ~0xf;
+ }
+ for (i = 0; i < NUM_TX_DMA; i++) {
+ /* reset control bits */
+ aup->tx_dma_ring[i]->buff_stat &= ~0xf;
+ }
+
+ aup->mac_enabled = 0;
+
+}
+
+static void au1000_reset_mac(struct net_device *dev)
+{
+ struct au1000_private *const aup = netdev_priv(dev);
+ unsigned long flags;
+
+ netif_dbg(aup, hw, dev, "reset mac, aup %x\n",
+ (unsigned)aup);
+
+ spin_lock_irqsave(&aup->lock, flags);
+
+ au1000_reset_mac_unlocked(dev);
+
+ spin_unlock_irqrestore(&aup->lock, flags);
+}
+
+/*
+ * Setup the receive and transmit "rings". These pointers are the addresses
+ * of the rx and tx MAC DMA registers so they are fixed by the hardware --
+ * these are not descriptors sitting in memory.
+ */
+static void
+au1000_setup_hw_rings(struct au1000_private *aup, void __iomem *tx_base)
+{
+ int i;
+
+ for (i = 0; i < NUM_RX_DMA; i++) {
+ aup->rx_dma_ring[i] = (struct rx_dma *)
+ (tx_base + 0x100 + sizeof(struct rx_dma) * i);
+ }
+ for (i = 0; i < NUM_TX_DMA; i++) {
+ aup->tx_dma_ring[i] = (struct tx_dma *)
+ (tx_base + sizeof(struct tx_dma) * i);
+ }
+}
+
+/*
+ * ethtool operations
+ */
+
+static int au1000_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct au1000_private *aup = netdev_priv(dev);
+
+ if (aup->phy_dev)
+ return phy_ethtool_gset(aup->phy_dev, cmd);
+
+ return -EINVAL;
+}
+
+static int au1000_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct au1000_private *aup = netdev_priv(dev);
+
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ if (aup->phy_dev)
+ return phy_ethtool_sset(aup->phy_dev, cmd);
+
+ return -EINVAL;
+}
+
+static void
+au1000_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+ struct au1000_private *aup = netdev_priv(dev);
+
+ strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
+ strlcpy(info->version, DRV_VERSION, sizeof(info->version));
+ snprintf(info->bus_info, sizeof(info->bus_info), "%s %d", DRV_NAME,
+ aup->mac_id);
+ info->regdump_len = 0;
+}
+
+static void au1000_set_msglevel(struct net_device *dev, u32 value)
+{
+ struct au1000_private *aup = netdev_priv(dev);
+ aup->msg_enable = value;
+}
+
+static u32 au1000_get_msglevel(struct net_device *dev)
+{
+ struct au1000_private *aup = netdev_priv(dev);
+ return aup->msg_enable;
+}
+
+static const struct ethtool_ops au1000_ethtool_ops = {
+ .get_settings = au1000_get_settings,
+ .set_settings = au1000_set_settings,
+ .get_drvinfo = au1000_get_drvinfo,
+ .get_link = ethtool_op_get_link,
+ .get_msglevel = au1000_get_msglevel,
+ .set_msglevel = au1000_set_msglevel,
+};
+
+
+/*
+ * Initialize the interface.
+ *
+ * When the device powers up, the clocks are disabled and the
+ * mac is in reset state. When the interface is closed, we
+ * do the same -- reset the device and disable the clocks to
+ * conserve power. Thus, whenever au1000_init() is called,
+ * the device should already be in reset state.
+ */
+static int au1000_init(struct net_device *dev)
+{
+ struct au1000_private *aup = netdev_priv(dev);
+ unsigned long flags;
+ int i;
+ u32 control;
+
+ netif_dbg(aup, hw, dev, "au1000_init\n");
+
+ /* bring the device out of reset */
+ au1000_enable_mac(dev, 1);
+
+ spin_lock_irqsave(&aup->lock, flags);
+
+ writel(0, &aup->mac->control);
+ aup->tx_head = (aup->tx_dma_ring[0]->buff_stat & 0xC) >> 2;
+ aup->tx_tail = aup->tx_head;
+ aup->rx_head = (aup->rx_dma_ring[0]->buff_stat & 0xC) >> 2;
+
+ writel(dev->dev_addr[5]<<8 | dev->dev_addr[4],
+ &aup->mac->mac_addr_high);
+ writel(dev->dev_addr[3]<<24 | dev->dev_addr[2]<<16 |
+ dev->dev_addr[1]<<8 | dev->dev_addr[0],
+ &aup->mac->mac_addr_low);
+
+
+ for (i = 0; i < NUM_RX_DMA; i++)
+ aup->rx_dma_ring[i]->buff_stat |= RX_DMA_ENABLE;
+
+ wmb(); /* drain writebuffer */
+
+ control = MAC_RX_ENABLE | MAC_TX_ENABLE;
+#ifndef CONFIG_CPU_LITTLE_ENDIAN
+ control |= MAC_BIG_ENDIAN;
+#endif
+ if (aup->phy_dev) {
+ if (aup->phy_dev->link && (DUPLEX_FULL == aup->phy_dev->duplex))
+ control |= MAC_FULL_DUPLEX;
+ else
+ control |= MAC_DISABLE_RX_OWN;
+ } else { /* PHY-less op, assume full-duplex */
+ control |= MAC_FULL_DUPLEX;
+ }
+
+ writel(control, &aup->mac->control);
+ writel(0x8100, &aup->mac->vlan1_tag); /* activate vlan support */
+ wmb(); /* drain writebuffer */
+
+ spin_unlock_irqrestore(&aup->lock, flags);
+ return 0;
+}
+
+static inline void au1000_update_rx_stats(struct net_device *dev, u32 status)
+{
+ struct net_device_stats *ps = &dev->stats;
+
+ ps->rx_packets++;
+ if (status & RX_MCAST_FRAME)
+ ps->multicast++;
+
+ if (status & RX_ERROR) {
+ ps->rx_errors++;
+ if (status & RX_MISSED_FRAME)
+ ps->rx_missed_errors++;
+ if (status & (RX_OVERLEN | RX_RUNT | RX_LEN_ERROR))
+ ps->rx_length_errors++;
+ if (status & RX_CRC_ERROR)
+ ps->rx_crc_errors++;
+ if (status & RX_COLL)
+ ps->collisions++;
+ } else
+ ps->rx_bytes += status & RX_FRAME_LEN_MASK;
+
+}
+
+/*
+ * Au1000 receive routine.
+ */
+static int au1000_rx(struct net_device *dev)
+{
+ struct au1000_private *aup = netdev_priv(dev);
+ struct sk_buff *skb;
+ struct rx_dma *prxd;
+ u32 buff_stat, status;
+ struct db_dest *pDB;
+ u32 frmlen;
+
+ netif_dbg(aup, rx_status, dev, "au1000_rx head %d\n", aup->rx_head);
+
+ prxd = aup->rx_dma_ring[aup->rx_head];
+ buff_stat = prxd->buff_stat;
+ while (buff_stat & RX_T_DONE) {
+ status = prxd->status;
+ pDB = aup->rx_db_inuse[aup->rx_head];
+ au1000_update_rx_stats(dev, status);
+ if (!(status & RX_ERROR)) {
+
+ /* good frame */
+ frmlen = (status & RX_FRAME_LEN_MASK);
+ frmlen -= 4; /* Remove FCS */
+ skb = netdev_alloc_skb(dev, frmlen + 2);
+ if (skb == NULL) {
+ dev->stats.rx_dropped++;
+ continue;
+ }
+ skb_reserve(skb, 2); /* 16 byte IP header align */
+ skb_copy_to_linear_data(skb,
+ (unsigned char *)pDB->vaddr, frmlen);
+ skb_put(skb, frmlen);
+ skb->protocol = eth_type_trans(skb, dev);
+ netif_rx(skb); /* pass the packet to upper layers */
+ } else {
+ if (au1000_debug > 4) {
+ pr_err("rx_error(s):");
+ if (status & RX_MISSED_FRAME)
+ pr_cont(" miss");
+ if (status & RX_WDOG_TIMER)
+ pr_cont(" wdog");
+ if (status & RX_RUNT)
+ pr_cont(" runt");
+ if (status & RX_OVERLEN)
+ pr_cont(" overlen");
+ if (status & RX_COLL)
+ pr_cont(" coll");
+ if (status & RX_MII_ERROR)
+ pr_cont(" mii error");
+ if (status & RX_CRC_ERROR)
+ pr_cont(" crc error");
+ if (status & RX_LEN_ERROR)
+ pr_cont(" len error");
+ if (status & RX_U_CNTRL_FRAME)
+ pr_cont(" u control frame");
+ pr_cont("\n");
+ }
+ }
+ prxd->buff_stat = (u32)(pDB->dma_addr | RX_DMA_ENABLE);
+ aup->rx_head = (aup->rx_head + 1) & (NUM_RX_DMA - 1);
+ wmb(); /* drain writebuffer */
+
+ /* next descriptor */
+ prxd = aup->rx_dma_ring[aup->rx_head];
+ buff_stat = prxd->buff_stat;
+ }
+ return 0;
+}
+
+static void au1000_update_tx_stats(struct net_device *dev, u32 status)
+{
+ struct au1000_private *aup = netdev_priv(dev);
+ struct net_device_stats *ps = &dev->stats;
+
+ if (status & TX_FRAME_ABORTED) {
+ if (!aup->phy_dev || (DUPLEX_FULL == aup->phy_dev->duplex)) {
+ if (status & (TX_JAB_TIMEOUT | TX_UNDERRUN)) {
+ /* any other tx errors are only valid
+ * in half duplex mode
+ */
+ ps->tx_errors++;
+ ps->tx_aborted_errors++;
+ }
+ } else {
+ ps->tx_errors++;
+ ps->tx_aborted_errors++;
+ if (status & (TX_NO_CARRIER | TX_LOSS_CARRIER))
+ ps->tx_carrier_errors++;
+ }
+ }
+}
+
+/*
+ * Called from the interrupt service routine to acknowledge
+ * the TX DONE bits. This is a must if the irq is setup as
+ * edge triggered.
+ */
+static void au1000_tx_ack(struct net_device *dev)
+{
+ struct au1000_private *aup = netdev_priv(dev);
+ struct tx_dma *ptxd;
+
+ ptxd = aup->tx_dma_ring[aup->tx_tail];
+
+ while (ptxd->buff_stat & TX_T_DONE) {
+ au1000_update_tx_stats(dev, ptxd->status);
+ ptxd->buff_stat &= ~TX_T_DONE;
+ ptxd->len = 0;
+ wmb(); /* drain writebuffer */
+
+ aup->tx_tail = (aup->tx_tail + 1) & (NUM_TX_DMA - 1);
+ ptxd = aup->tx_dma_ring[aup->tx_tail];
+
+ if (aup->tx_full) {
+ aup->tx_full = 0;
+ netif_wake_queue(dev);
+ }
+ }
+}
+
+/*
+ * Au1000 interrupt service routine.
+ */
+static irqreturn_t au1000_interrupt(int irq, void *dev_id)
+{
+ struct net_device *dev = dev_id;
+
+ /* Handle RX interrupts first to minimize chance of overrun */
+
+ au1000_rx(dev);
+ au1000_tx_ack(dev);
+ return IRQ_RETVAL(1);
+}
+
+static int au1000_open(struct net_device *dev)
+{
+ int retval;
+ struct au1000_private *aup = netdev_priv(dev);
+
+ netif_dbg(aup, drv, dev, "open: dev=%p\n", dev);
+
+ retval = request_irq(dev->irq, au1000_interrupt, 0,
+ dev->name, dev);
+ if (retval) {
+ netdev_err(dev, "unable to get IRQ %d\n", dev->irq);
+ return retval;
+ }
+
+ retval = au1000_init(dev);
+ if (retval) {
+ netdev_err(dev, "error in au1000_init\n");
+ free_irq(dev->irq, dev);
+ return retval;
+ }
+
+ if (aup->phy_dev) {
+ /* cause the PHY state machine to schedule a link state check */
+ aup->phy_dev->state = PHY_CHANGELINK;
+ phy_start(aup->phy_dev);
+ }
+
+ netif_start_queue(dev);
+
+ netif_dbg(aup, drv, dev, "open: Initialization done.\n");
+
+ return 0;
+}
+
+static int au1000_close(struct net_device *dev)
+{
+ unsigned long flags;
+ struct au1000_private *const aup = netdev_priv(dev);
+
+ netif_dbg(aup, drv, dev, "close: dev=%p\n", dev);
+
+ if (aup->phy_dev)
+ phy_stop(aup->phy_dev);
+
+ spin_lock_irqsave(&aup->lock, flags);
+
+ au1000_reset_mac_unlocked(dev);
+
+ /* stop the device */
+ netif_stop_queue(dev);
+
+ /* disable the interrupt */
+ free_irq(dev->irq, dev);
+ spin_unlock_irqrestore(&aup->lock, flags);
+
+ return 0;
+}
+
+/*
+ * Au1000 transmit routine.
+ */
+static netdev_tx_t au1000_tx(struct sk_buff *skb, struct net_device *dev)
+{
+ struct au1000_private *aup = netdev_priv(dev);
+ struct net_device_stats *ps = &dev->stats;
+ struct tx_dma *ptxd;
+ u32 buff_stat;
+ struct db_dest *pDB;
+ int i;
+
+ netif_dbg(aup, tx_queued, dev, "tx: aup %x len=%d, data=%p, head %d\n",
+ (unsigned)aup, skb->len,
+ skb->data, aup->tx_head);
+
+ ptxd = aup->tx_dma_ring[aup->tx_head];
+ buff_stat = ptxd->buff_stat;
+ if (buff_stat & TX_DMA_ENABLE) {
+ /* We've wrapped around and the transmitter is still busy */
+ netif_stop_queue(dev);
+ aup->tx_full = 1;
+ return NETDEV_TX_BUSY;
+ } else if (buff_stat & TX_T_DONE) {
+ au1000_update_tx_stats(dev, ptxd->status);
+ ptxd->len = 0;
+ }
+
+ if (aup->tx_full) {
+ aup->tx_full = 0;
+ netif_wake_queue(dev);
+ }
+
+ pDB = aup->tx_db_inuse[aup->tx_head];
+ skb_copy_from_linear_data(skb, (void *)pDB->vaddr, skb->len);
+ if (skb->len < ETH_ZLEN) {
+ for (i = skb->len; i < ETH_ZLEN; i++)
+ ((char *)pDB->vaddr)[i] = 0;
+
+ ptxd->len = ETH_ZLEN;
+ } else
+ ptxd->len = skb->len;
+
+ ps->tx_packets++;
+ ps->tx_bytes += ptxd->len;
+
+ ptxd->buff_stat = pDB->dma_addr | TX_DMA_ENABLE;
+ wmb(); /* drain writebuffer */
+ dev_kfree_skb(skb);
+ aup->tx_head = (aup->tx_head + 1) & (NUM_TX_DMA - 1);
+ return NETDEV_TX_OK;
+}
+
+/*
+ * The Tx ring has been full longer than the watchdog timeout
+ * value. The transmitter must be hung?
+ */
+static void au1000_tx_timeout(struct net_device *dev)
+{
+ netdev_err(dev, "au1000_tx_timeout: dev=%p\n", dev);
+ au1000_reset_mac(dev);
+ au1000_init(dev);
+ dev->trans_start = jiffies; /* prevent tx timeout */
+ netif_wake_queue(dev);
+}
+
+static void au1000_multicast_list(struct net_device *dev)
+{
+ struct au1000_private *aup = netdev_priv(dev);
+ u32 reg;
+
+ netif_dbg(aup, drv, dev, "%s: flags=%x\n", __func__, dev->flags);
+ reg = readl(&aup->mac->control);
+ if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
+ reg |= MAC_PROMISCUOUS;
+ } else if ((dev->flags & IFF_ALLMULTI) ||
+ netdev_mc_count(dev) > MULTICAST_FILTER_LIMIT) {
+ reg |= MAC_PASS_ALL_MULTI;
+ reg &= ~MAC_PROMISCUOUS;
+ netdev_info(dev, "Pass all multicast\n");
+ } else {
+ struct netdev_hw_addr *ha;
+ u32 mc_filter[2]; /* Multicast hash filter */
+
+ mc_filter[1] = mc_filter[0] = 0;
+ netdev_for_each_mc_addr(ha, dev)
+ set_bit(ether_crc(ETH_ALEN, ha->addr)>>26,
+ (long *)mc_filter);
+ writel(mc_filter[1], &aup->mac->multi_hash_high);
+ writel(mc_filter[0], &aup->mac->multi_hash_low);
+ reg &= ~MAC_PROMISCUOUS;
+ reg |= MAC_HASH_MODE;
+ }
+ writel(reg, &aup->mac->control);
+}
+
+static int au1000_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct au1000_private *aup = netdev_priv(dev);
+
+ if (!netif_running(dev))
+ return -EINVAL;
+
+ if (!aup->phy_dev)
+ return -EINVAL; /* PHY not controllable */
+
+ return phy_mii_ioctl(aup->phy_dev, rq, cmd);
+}
+
+static const struct net_device_ops au1000_netdev_ops = {
+ .ndo_open = au1000_open,
+ .ndo_stop = au1000_close,
+ .ndo_start_xmit = au1000_tx,
+ .ndo_set_rx_mode = au1000_multicast_list,
+ .ndo_do_ioctl = au1000_ioctl,
+ .ndo_tx_timeout = au1000_tx_timeout,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = eth_change_mtu,
+};
+
+static int au1000_probe(struct platform_device *pdev)
+{
+ struct au1000_private *aup = NULL;
+ struct au1000_eth_platform_data *pd;
+ struct net_device *dev = NULL;
+ struct db_dest *pDB, *pDBfree;
+ int irq, i, err = 0;
+ struct resource *base, *macen, *macdma;
+
+ base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!base) {
+ dev_err(&pdev->dev, "failed to retrieve base register\n");
+ err = -ENODEV;
+ goto out;
+ }
+
+ macen = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!macen) {
+ dev_err(&pdev->dev, "failed to retrieve MAC Enable register\n");
+ err = -ENODEV;
+ goto out;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "failed to retrieve IRQ\n");
+ err = -ENODEV;
+ goto out;
+ }
+
+ macdma = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+ if (!macdma) {
+ dev_err(&pdev->dev, "failed to retrieve MACDMA registers\n");
+ err = -ENODEV;
+ goto out;
+ }
+
+ if (!request_mem_region(base->start, resource_size(base),
+ pdev->name)) {
+ dev_err(&pdev->dev, "failed to request memory region for base registers\n");
+ err = -ENXIO;
+ goto out;
+ }
+
+ if (!request_mem_region(macen->start, resource_size(macen),
+ pdev->name)) {
+ dev_err(&pdev->dev, "failed to request memory region for MAC enable register\n");
+ err = -ENXIO;
+ goto err_request;
+ }
+
+ if (!request_mem_region(macdma->start, resource_size(macdma),
+ pdev->name)) {
+ dev_err(&pdev->dev, "failed to request MACDMA memory region\n");
+ err = -ENXIO;
+ goto err_macdma;
+ }
+
+ dev = alloc_etherdev(sizeof(struct au1000_private));
+ if (!dev) {
+ err = -ENOMEM;
+ goto err_alloc;
+ }
+
+ SET_NETDEV_DEV(dev, &pdev->dev);
+ platform_set_drvdata(pdev, dev);
+ aup = netdev_priv(dev);
+
+ spin_lock_init(&aup->lock);
+ aup->msg_enable = (au1000_debug < 4 ?
+ AU1000_DEF_MSG_ENABLE : au1000_debug);
+
+ /* Allocate the data buffers
+ * Snooping works fine with eth on all au1xxx
+ */
+ aup->vaddr = (u32)dma_alloc_noncoherent(NULL, MAX_BUF_SIZE *
+ (NUM_TX_BUFFS + NUM_RX_BUFFS),
+ &aup->dma_addr, 0);
+ if (!aup->vaddr) {
+ dev_err(&pdev->dev, "failed to allocate data buffers\n");
+ err = -ENOMEM;
+ goto err_vaddr;
+ }
+
+ /* aup->mac is the base address of the MAC's registers */
+ aup->mac = (struct mac_reg *)
+ ioremap_nocache(base->start, resource_size(base));
+ if (!aup->mac) {
+ dev_err(&pdev->dev, "failed to ioremap MAC registers\n");
+ err = -ENXIO;
+ goto err_remap1;
+ }
+
+ /* Setup some variables for quick register address access */
+ aup->enable = (u32 *)ioremap_nocache(macen->start,
+ resource_size(macen));
+ if (!aup->enable) {
+ dev_err(&pdev->dev, "failed to ioremap MAC enable register\n");
+ err = -ENXIO;
+ goto err_remap2;
+ }
+ aup->mac_id = pdev->id;
+
+ aup->macdma = ioremap_nocache(macdma->start, resource_size(macdma));
+ if (!aup->macdma) {
+ dev_err(&pdev->dev, "failed to ioremap MACDMA registers\n");
+ err = -ENXIO;
+ goto err_remap3;
+ }
+
+ au1000_setup_hw_rings(aup, aup->macdma);
+
+ writel(0, aup->enable);
+ aup->mac_enabled = 0;
+
+ pd = dev_get_platdata(&pdev->dev);
+ if (!pd) {
+ dev_info(&pdev->dev, "no platform_data passed,"
+ " PHY search on MAC0\n");
+ aup->phy1_search_mac0 = 1;
+ } else {
+ if (is_valid_ether_addr(pd->mac)) {
+ memcpy(dev->dev_addr, pd->mac, ETH_ALEN);
+ } else {
+ /* Set a random MAC since no valid provided by platform_data. */
+ eth_hw_addr_random(dev);
+ }
+
+ aup->phy_static_config = pd->phy_static_config;
+ aup->phy_search_highest_addr = pd->phy_search_highest_addr;
+ aup->phy1_search_mac0 = pd->phy1_search_mac0;
+ aup->phy_addr = pd->phy_addr;
+ aup->phy_busid = pd->phy_busid;
+ aup->phy_irq = pd->phy_irq;
+ }
+
+ if (aup->phy_busid && aup->phy_busid > 0) {
+ dev_err(&pdev->dev, "MAC0-associated PHY attached 2nd MACs MII bus not supported yet\n");
+ err = -ENODEV;
+ goto err_mdiobus_alloc;
+ }
+
+ aup->mii_bus = mdiobus_alloc();
+ if (aup->mii_bus == NULL) {
+ dev_err(&pdev->dev, "failed to allocate mdiobus structure\n");
+ err = -ENOMEM;
+ goto err_mdiobus_alloc;
+ }
+
+ aup->mii_bus->priv = dev;
+ aup->mii_bus->read = au1000_mdiobus_read;
+ aup->mii_bus->write = au1000_mdiobus_write;
+ aup->mii_bus->reset = au1000_mdiobus_reset;
+ aup->mii_bus->name = "au1000_eth_mii";
+ snprintf(aup->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
+ pdev->name, aup->mac_id);
+ aup->mii_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
+ if (aup->mii_bus->irq == NULL) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+
+ for (i = 0; i < PHY_MAX_ADDR; ++i)
+ aup->mii_bus->irq[i] = PHY_POLL;
+ /* if known, set corresponding PHY IRQs */
+ if (aup->phy_static_config)
+ if (aup->phy_irq && aup->phy_busid == aup->mac_id)
+ aup->mii_bus->irq[aup->phy_addr] = aup->phy_irq;
+
+ err = mdiobus_register(aup->mii_bus);
+ if (err) {
+ dev_err(&pdev->dev, "failed to register MDIO bus\n");
+ goto err_mdiobus_reg;
+ }
+
+ err = au1000_mii_probe(dev);
+ if (err != 0)
+ goto err_out;
+
+ pDBfree = NULL;
+ /* setup the data buffer descriptors and attach a buffer to each one */
+ pDB = aup->db;
+ for (i = 0; i < (NUM_TX_BUFFS+NUM_RX_BUFFS); i++) {
+ pDB->pnext = pDBfree;
+ pDBfree = pDB;
+ pDB->vaddr = (u32 *)((unsigned)aup->vaddr + MAX_BUF_SIZE*i);
+ pDB->dma_addr = (dma_addr_t)virt_to_bus(pDB->vaddr);
+ pDB++;
+ }
+ aup->pDBfree = pDBfree;
+
+ err = -ENODEV;
+ for (i = 0; i < NUM_RX_DMA; i++) {
+ pDB = au1000_GetFreeDB(aup);
+ if (!pDB)
+ goto err_out;
+
+ aup->rx_dma_ring[i]->buff_stat = (unsigned)pDB->dma_addr;
+ aup->rx_db_inuse[i] = pDB;
+ }
+
+ err = -ENODEV;
+ for (i = 0; i < NUM_TX_DMA; i++) {
+ pDB = au1000_GetFreeDB(aup);
+ if (!pDB)
+ goto err_out;
+
+ aup->tx_dma_ring[i]->buff_stat = (unsigned)pDB->dma_addr;
+ aup->tx_dma_ring[i]->len = 0;
+ aup->tx_db_inuse[i] = pDB;
+ }
+
+ dev->base_addr = base->start;
+ dev->irq = irq;
+ dev->netdev_ops = &au1000_netdev_ops;
+ dev->ethtool_ops = &au1000_ethtool_ops;
+ dev->watchdog_timeo = ETH_TX_TIMEOUT;
+
+ /*
+ * The boot code uses the ethernet controller, so reset it to start
+ * fresh. au1000_init() expects that the device is in reset state.
+ */
+ au1000_reset_mac(dev);
+
+ err = register_netdev(dev);
+ if (err) {
+ netdev_err(dev, "Cannot register net device, aborting.\n");
+ goto err_out;
+ }
+
+ netdev_info(dev, "Au1xx0 Ethernet found at 0x%lx, irq %d\n",
+ (unsigned long)base->start, irq);
+
+ pr_info_once("%s version %s %s\n", DRV_NAME, DRV_VERSION, DRV_AUTHOR);
+
+ return 0;
+
+err_out:
+ if (aup->mii_bus != NULL)
+ mdiobus_unregister(aup->mii_bus);
+
+ /* here we should have a valid dev plus aup-> register addresses
+ * so we can reset the mac properly.
+ */
+ au1000_reset_mac(dev);
+
+ for (i = 0; i < NUM_RX_DMA; i++) {
+ if (aup->rx_db_inuse[i])
+ au1000_ReleaseDB(aup, aup->rx_db_inuse[i]);
+ }
+ for (i = 0; i < NUM_TX_DMA; i++) {
+ if (aup->tx_db_inuse[i])
+ au1000_ReleaseDB(aup, aup->tx_db_inuse[i]);
+ }
+err_mdiobus_reg:
+ mdiobus_free(aup->mii_bus);
+err_mdiobus_alloc:
+ iounmap(aup->macdma);
+err_remap3:
+ iounmap(aup->enable);
+err_remap2:
+ iounmap(aup->mac);
+err_remap1:
+ dma_free_noncoherent(NULL, MAX_BUF_SIZE * (NUM_TX_BUFFS + NUM_RX_BUFFS),
+ (void *)aup->vaddr, aup->dma_addr);
+err_vaddr:
+ free_netdev(dev);
+err_alloc:
+ release_mem_region(macdma->start, resource_size(macdma));
+err_macdma:
+ release_mem_region(macen->start, resource_size(macen));
+err_request:
+ release_mem_region(base->start, resource_size(base));
+out:
+ return err;
+}
+
+static int au1000_remove(struct platform_device *pdev)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+ struct au1000_private *aup = netdev_priv(dev);
+ int i;
+ struct resource *base, *macen;
+
+ unregister_netdev(dev);
+ mdiobus_unregister(aup->mii_bus);
+ mdiobus_free(aup->mii_bus);
+
+ for (i = 0; i < NUM_RX_DMA; i++)
+ if (aup->rx_db_inuse[i])
+ au1000_ReleaseDB(aup, aup->rx_db_inuse[i]);
+
+ for (i = 0; i < NUM_TX_DMA; i++)
+ if (aup->tx_db_inuse[i])
+ au1000_ReleaseDB(aup, aup->tx_db_inuse[i]);
+
+ dma_free_noncoherent(NULL, MAX_BUF_SIZE *
+ (NUM_TX_BUFFS + NUM_RX_BUFFS),
+ (void *)aup->vaddr, aup->dma_addr);
+
+ iounmap(aup->macdma);
+ iounmap(aup->mac);
+ iounmap(aup->enable);
+
+ base = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+ release_mem_region(base->start, resource_size(base));
+
+ base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(base->start, resource_size(base));
+
+ macen = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ release_mem_region(macen->start, resource_size(macen));
+
+ free_netdev(dev);
+
+ return 0;
+}
+
+static struct platform_driver au1000_eth_driver = {
+ .probe = au1000_probe,
+ .remove = au1000_remove,
+ .driver = {
+ .name = "au1000-eth",
+ },
+};
+
+module_platform_driver(au1000_eth_driver);
+
+MODULE_ALIAS("platform:au1000-eth");
Code Review / kvmfornfv.git / blobdiff