--- /dev/null
+#
+# Ethernet LAN device configuration
+#
+
+menuconfig ETHERNET
+ bool "Ethernet driver support"
+ depends on NET
+ default y
+ ---help---
+ This section contains all the Ethernet device drivers.
+
+if ETHERNET
+
+config MDIO
+ tristate
+
+config SUNGEM_PHY
+ tristate
+
+source "drivers/net/ethernet/3com/Kconfig"
+source "drivers/net/ethernet/adaptec/Kconfig"
+source "drivers/net/ethernet/aeroflex/Kconfig"
+source "drivers/net/ethernet/agere/Kconfig"
+source "drivers/net/ethernet/allwinner/Kconfig"
+source "drivers/net/ethernet/alteon/Kconfig"
+source "drivers/net/ethernet/altera/Kconfig"
+source "drivers/net/ethernet/amd/Kconfig"
+source "drivers/net/ethernet/apm/Kconfig"
+source "drivers/net/ethernet/apple/Kconfig"
+source "drivers/net/ethernet/arc/Kconfig"
+source "drivers/net/ethernet/atheros/Kconfig"
+source "drivers/net/ethernet/cadence/Kconfig"
+source "drivers/net/ethernet/adi/Kconfig"
+source "drivers/net/ethernet/broadcom/Kconfig"
+source "drivers/net/ethernet/brocade/Kconfig"
+source "drivers/net/ethernet/calxeda/Kconfig"
+source "drivers/net/ethernet/chelsio/Kconfig"
+source "drivers/net/ethernet/cirrus/Kconfig"
+source "drivers/net/ethernet/cisco/Kconfig"
+
+config CX_ECAT
+ tristate "Beckhoff CX5020 EtherCAT master support"
+ depends on PCI
+ depends on X86 || COMPILE_TEST
+ ---help---
+ Driver for EtherCAT master module located on CCAT FPGA
+ that can be found on Beckhoff CX5020, and possibly other of CX
+ Beckhoff CX series industrial PCs.
+
+ To compile this driver as a module, choose M here. The module
+ will be called ec_bhf.
+
+source "drivers/net/ethernet/davicom/Kconfig"
+
+config DNET
+ tristate "Dave ethernet support (DNET)"
+ depends on HAS_IOMEM
+ select PHYLIB
+ ---help---
+ The Dave ethernet interface (DNET) is found on Qong Board FPGA.
+ Say Y to include support for the DNET chip.
+
+ To compile this driver as a module, choose M here: the module
+ will be called dnet.
+
+source "drivers/net/ethernet/dec/Kconfig"
+source "drivers/net/ethernet/dlink/Kconfig"
+source "drivers/net/ethernet/emulex/Kconfig"
+source "drivers/net/ethernet/neterion/Kconfig"
+source "drivers/net/ethernet/faraday/Kconfig"
+source "drivers/net/ethernet/freescale/Kconfig"
+source "drivers/net/ethernet/fujitsu/Kconfig"
+source "drivers/net/ethernet/hisilicon/Kconfig"
+source "drivers/net/ethernet/hp/Kconfig"
+source "drivers/net/ethernet/ibm/Kconfig"
+source "drivers/net/ethernet/intel/Kconfig"
+source "drivers/net/ethernet/i825xx/Kconfig"
+source "drivers/net/ethernet/xscale/Kconfig"
+source "drivers/net/ethernet/icplus/Kconfig"
+
+config JME
+ tristate "JMicron(R) PCI-Express Gigabit Ethernet support"
+ depends on PCI
+ select CRC32
+ select MII
+ ---help---
+ This driver supports the PCI-Express gigabit ethernet adapters
+ based on JMicron JMC250 chipset.
+
+ To compile this driver as a module, choose M here. The module
+ will be called jme.
+
+config KORINA
+ tristate "Korina (IDT RC32434) Ethernet support"
+ depends on MIKROTIK_RB532
+ ---help---
+ If you have a Mikrotik RouterBoard 500 or IDT RC32434
+ based system say Y. Otherwise say N.
+
+config LANTIQ_ETOP
+ tristate "Lantiq SoC ETOP driver"
+ depends on SOC_TYPE_XWAY
+ ---help---
+ Support for the MII0 inside the Lantiq SoC
+
+source "drivers/net/ethernet/marvell/Kconfig"
+source "drivers/net/ethernet/mellanox/Kconfig"
+source "drivers/net/ethernet/micrel/Kconfig"
+source "drivers/net/ethernet/microchip/Kconfig"
+source "drivers/net/ethernet/moxa/Kconfig"
+source "drivers/net/ethernet/myricom/Kconfig"
+
+config FEALNX
+ tristate "Myson MTD-8xx PCI Ethernet support"
+ depends on PCI
+ select CRC32
+ select MII
+ ---help---
+ Say Y here to support the Myson MTD-800 family of PCI-based Ethernet
+ cards. <http://www.myson.com.tw/>
+
+source "drivers/net/ethernet/natsemi/Kconfig"
+source "drivers/net/ethernet/8390/Kconfig"
+
+config NET_NETX
+ tristate "NetX Ethernet support"
+ select MII
+ depends on ARCH_NETX
+ ---help---
+ This is support for the Hilscher netX builtin Ethernet ports
+
+ To compile this driver as a module, choose M here. The module
+ will be called netx-eth.
+
+source "drivers/net/ethernet/nuvoton/Kconfig"
+source "drivers/net/ethernet/nvidia/Kconfig"
+source "drivers/net/ethernet/nxp/Kconfig"
+source "drivers/net/ethernet/octeon/Kconfig"
+source "drivers/net/ethernet/oki-semi/Kconfig"
+
+config ETHOC
+ tristate "OpenCores 10/100 Mbps Ethernet MAC support"
+ depends on HAS_IOMEM && HAS_DMA
+ select MII
+ select PHYLIB
+ select CRC32
+ select BITREVERSE
+ ---help---
+ Say Y here if you want to use the OpenCores 10/100 Mbps Ethernet MAC.
+
+source "drivers/net/ethernet/packetengines/Kconfig"
+source "drivers/net/ethernet/pasemi/Kconfig"
+source "drivers/net/ethernet/qlogic/Kconfig"
+source "drivers/net/ethernet/qualcomm/Kconfig"
+source "drivers/net/ethernet/realtek/Kconfig"
+source "drivers/net/ethernet/renesas/Kconfig"
+source "drivers/net/ethernet/rdc/Kconfig"
+source "drivers/net/ethernet/rocker/Kconfig"
+source "drivers/net/ethernet/samsung/Kconfig"
+source "drivers/net/ethernet/seeq/Kconfig"
+source "drivers/net/ethernet/silan/Kconfig"
+source "drivers/net/ethernet/sis/Kconfig"
+source "drivers/net/ethernet/sfc/Kconfig"
+source "drivers/net/ethernet/sgi/Kconfig"
+source "drivers/net/ethernet/smsc/Kconfig"
+source "drivers/net/ethernet/stmicro/Kconfig"
+source "drivers/net/ethernet/sun/Kconfig"
+source "drivers/net/ethernet/tehuti/Kconfig"
+source "drivers/net/ethernet/ti/Kconfig"
+source "drivers/net/ethernet/tile/Kconfig"
+source "drivers/net/ethernet/toshiba/Kconfig"
+source "drivers/net/ethernet/tundra/Kconfig"
+source "drivers/net/ethernet/via/Kconfig"
+source "drivers/net/ethernet/wiznet/Kconfig"
+source "drivers/net/ethernet/xilinx/Kconfig"
+source "drivers/net/ethernet/xircom/Kconfig"
+
+endif # ETHERNET
Code Review / kvmfornfv.git / blobdiff