Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / net / arcnet / com20020-pci.c
diff --git a/kernel/drivers/net/arcnet/com20020-pci.c b/kernel/drivers/net/arcnet/com20020-pci.c
new file mode 100644 (file)
index 0000000..96edc13
--- /dev/null
@@ -0,0 +1,417 @@
+/*
+ * Linux ARCnet driver - COM20020 PCI support
+ * Contemporary Controls PCI20 and SOHARD SH-ARC PCI
+ * 
+ * Written 1994-1999 by Avery Pennarun,
+ *    based on an ISA version by David Woodhouse.
+ * Written 1999-2000 by Martin Mares <mj@ucw.cz>.
+ * Derived from skeleton.c by Donald Becker.
+ *
+ * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
+ *  for sponsoring the further development of this driver.
+ *
+ * **********************
+ *
+ * The original copyright of skeleton.c was as follows:
+ *
+ * skeleton.c Written 1993 by Donald Becker.
+ * Copyright 1993 United States Government as represented by the
+ * Director, National Security Agency.  This software may only be used
+ * and distributed according to the terms of the GNU General Public License as
+ * modified by SRC, incorporated herein by reference.
+ *
+ * **********************
+ *
+ * For more details, see drivers/net/arcnet.c
+ *
+ * **********************
+ */
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/arcdevice.h>
+#include <linux/com20020.h>
+#include <linux/list.h>
+
+#include <asm/io.h>
+
+
+#define VERSION "arcnet: COM20020 PCI support\n"
+
+/* Module parameters */
+
+static int node;
+static char device[9];         /* use eg. device="arc1" to change name */
+static int timeout = 3;
+static int backplane;
+static int clockp;
+static int clockm;
+
+module_param(node, int, 0);
+module_param_string(device, device, sizeof(device), 0);
+module_param(timeout, int, 0);
+module_param(backplane, int, 0);
+module_param(clockp, int, 0);
+module_param(clockm, int, 0);
+MODULE_LICENSE("GPL");
+
+static void com20020pci_remove(struct pci_dev *pdev);
+
+static int com20020pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+       struct com20020_pci_card_info *ci;
+       struct net_device *dev;
+       struct arcnet_local *lp;
+       struct com20020_priv *priv;
+       int i, ioaddr, ret;
+       struct resource *r;
+
+       if (pci_enable_device(pdev))
+               return -EIO;
+
+       priv = devm_kzalloc(&pdev->dev, sizeof(struct com20020_priv),
+                           GFP_KERNEL);
+       if (!priv)
+               return -ENOMEM;
+
+       ci = (struct com20020_pci_card_info *)id->driver_data;
+       priv->ci = ci;
+
+       INIT_LIST_HEAD(&priv->list_dev);
+
+
+       for (i = 0; i < ci->devcount; i++) {
+               struct com20020_pci_channel_map *cm = &ci->chan_map_tbl[i];
+               struct com20020_dev *card;
+
+               dev = alloc_arcdev(device);
+               if (!dev) {
+                       ret = -ENOMEM;
+                       goto out_port;
+               }
+
+               dev->netdev_ops = &com20020_netdev_ops;
+
+               lp = netdev_priv(dev);
+
+               BUGMSG(D_NORMAL, "%s Controls\n", ci->name);
+               ioaddr = pci_resource_start(pdev, cm->bar) + cm->offset;
+
+               r = devm_request_region(&pdev->dev, ioaddr, cm->size,
+                                       "com20020-pci");
+               if (!r) {
+                       pr_err("IO region %xh-%xh already allocated.\n",
+                              ioaddr, ioaddr + cm->size - 1);
+                       ret = -EBUSY;
+                       goto out_port;
+               }
+
+               /* Dummy access after Reset
+                * ARCNET controller needs
+                * this access to detect bustype
+                */
+               outb(0x00, ioaddr + 1);
+               inb(ioaddr + 1);
+
+               dev->base_addr = ioaddr;
+               dev->dev_addr[0] = node;
+               dev->irq = pdev->irq;
+               lp->card_name = "PCI COM20020";
+               lp->card_flags = ci->flags;
+               lp->backplane = backplane;
+               lp->clockp = clockp & 7;
+               lp->clockm = clockm & 3;
+               lp->timeout = timeout;
+               lp->hw.owner = THIS_MODULE;
+
+               if (ASTATUS() == 0xFF) {
+                       pr_err("IO address %Xh is empty!\n", ioaddr);
+                       ret = -EIO;
+                       goto out_port;
+               }
+               if (com20020_check(dev)) {
+                       ret = -EIO;
+                       goto out_port;
+               }
+
+               card = devm_kzalloc(&pdev->dev, sizeof(struct com20020_dev),
+                                   GFP_KERNEL);
+               if (!card) {
+                       pr_err("%s out of memory!\n", __func__);
+                       return -ENOMEM;
+               }
+
+               card->index = i;
+               card->pci_priv = priv;
+               card->dev = dev;
+
+               dev_set_drvdata(&dev->dev, card);
+
+               ret = com20020_found(dev, IRQF_SHARED);
+               if (ret)
+                       goto out_port;
+
+               list_add(&card->list, &priv->list_dev);
+       }
+
+       pci_set_drvdata(pdev, priv);
+
+       return 0;
+
+out_port:
+       com20020pci_remove(pdev);
+       return ret;
+}
+
+static void com20020pci_remove(struct pci_dev *pdev)
+{
+       struct com20020_dev *card, *tmpcard;
+       struct com20020_priv *priv;
+
+       priv = pci_get_drvdata(pdev);
+
+       list_for_each_entry_safe(card, tmpcard, &priv->list_dev, list) {
+               struct net_device *dev = card->dev;
+
+               unregister_netdev(dev);
+               free_irq(dev->irq, dev);
+               free_netdev(dev);
+       }
+}
+
+static struct com20020_pci_card_info card_info_10mbit = {
+       .name = "ARC-PCI",
+       .devcount = 1,
+       .chan_map_tbl = {
+               { 2, 0x00, 0x08 },
+       },
+       .flags = ARC_CAN_10MBIT,
+};
+
+static struct com20020_pci_card_info card_info_5mbit = {
+       .name = "ARC-PCI",
+       .devcount = 1,
+       .chan_map_tbl = {
+               { 2, 0x00, 0x08 },
+       },
+       .flags = ARC_IS_5MBIT,
+};
+
+static struct com20020_pci_card_info card_info_sohard = {
+       .name = "PLX-PCI",
+       .devcount = 1,
+       /* SOHARD needs PCI base addr 4 */
+       .chan_map_tbl = {
+               {4, 0x00, 0x08},
+       },
+       .flags = ARC_CAN_10MBIT,
+};
+
+static struct com20020_pci_card_info card_info_eae_arc1 = {
+       .name = "EAE PLX-PCI ARC1",
+       .devcount = 1,
+       .chan_map_tbl = {
+               { 2, 0x00, 0x08 },
+       },
+       .flags = ARC_CAN_10MBIT,
+};
+
+static struct com20020_pci_card_info card_info_eae_ma1 = {
+       .name = "EAE PLX-PCI MA1",
+       .devcount = 2,
+       .chan_map_tbl = {
+               { 2, 0x00, 0x08 },
+               { 2, 0x08, 0x08 }
+       },
+       .flags = ARC_CAN_10MBIT,
+};
+
+static const struct pci_device_id com20020pci_id_table[] = {
+       {
+               0x1571, 0xa001,
+               PCI_ANY_ID, PCI_ANY_ID,
+               0, 0,
+               0,
+       },
+       {
+               0x1571, 0xa002,
+               PCI_ANY_ID, PCI_ANY_ID,
+               0, 0,
+               0,
+       },
+       {
+               0x1571, 0xa003,
+               PCI_ANY_ID, PCI_ANY_ID,
+               0, 0,
+               0
+       },
+       {
+               0x1571, 0xa004,
+               PCI_ANY_ID, PCI_ANY_ID,
+               0, 0,
+               0,
+       },
+       {
+               0x1571, 0xa005,
+               PCI_ANY_ID, PCI_ANY_ID,
+               0, 0,
+               0
+       },
+       {
+               0x1571, 0xa006,
+               PCI_ANY_ID, PCI_ANY_ID,
+               0, 0,
+               0
+       },
+       {
+               0x1571, 0xa007,
+               PCI_ANY_ID, PCI_ANY_ID,
+               0, 0,
+               0
+       },
+       {
+               0x1571, 0xa008,
+               PCI_ANY_ID, PCI_ANY_ID,
+               0, 0,
+               0
+       },
+       {
+               0x1571, 0xa009,
+               PCI_ANY_ID, PCI_ANY_ID,
+               0, 0,
+               (kernel_ulong_t)&card_info_5mbit
+       },
+       {
+               0x1571, 0xa00a,
+               PCI_ANY_ID, PCI_ANY_ID,
+               0, 0,
+               (kernel_ulong_t)&card_info_5mbit
+       },
+       {
+               0x1571, 0xa00b,
+               PCI_ANY_ID, PCI_ANY_ID,
+               0, 0,
+               (kernel_ulong_t)&card_info_5mbit
+       },
+       {
+               0x1571, 0xa00c,
+               PCI_ANY_ID, PCI_ANY_ID,
+               0, 0,
+               (kernel_ulong_t)&card_info_5mbit
+       },
+       {
+               0x1571, 0xa00d,
+               PCI_ANY_ID, PCI_ANY_ID,
+               0, 0,
+               (kernel_ulong_t)&card_info_5mbit
+       },
+       {
+               0x1571, 0xa00e,
+               PCI_ANY_ID, PCI_ANY_ID,
+               0, 0,
+               (kernel_ulong_t)&card_info_5mbit
+       },
+       {
+               0x1571, 0xa201,
+               PCI_ANY_ID, PCI_ANY_ID,
+               0, 0,
+               (kernel_ulong_t)&card_info_10mbit
+       },
+       {
+               0x1571, 0xa202,
+               PCI_ANY_ID, PCI_ANY_ID,
+               0, 0,
+               (kernel_ulong_t)&card_info_10mbit
+       },
+       {
+               0x1571, 0xa203,
+               PCI_ANY_ID, PCI_ANY_ID,
+               0, 0,
+               (kernel_ulong_t)&card_info_10mbit
+       },
+       {
+               0x1571, 0xa204,
+               PCI_ANY_ID, PCI_ANY_ID,
+               0, 0,
+               (kernel_ulong_t)&card_info_10mbit
+       },
+       {
+               0x1571, 0xa205,
+               PCI_ANY_ID, PCI_ANY_ID,
+               0, 0,
+               (kernel_ulong_t)&card_info_10mbit
+       },
+       {
+               0x1571, 0xa206,
+               PCI_ANY_ID, PCI_ANY_ID,
+               0, 0,
+               (kernel_ulong_t)&card_info_10mbit
+       },
+       {
+               0x10B5, 0x9030,
+               0x10B5, 0x2978,
+               0, 0,
+               (kernel_ulong_t)&card_info_sohard
+       },
+       {
+               0x10B5, 0x9050,
+               0x10B5, 0x2273,
+               0, 0,
+               (kernel_ulong_t)&card_info_sohard
+       },
+       {
+               0x10B5, 0x9050,
+               0x10B5, 0x3263,
+               0, 0,
+               (kernel_ulong_t)&card_info_eae_arc1
+       },
+       {
+               0x10B5, 0x9050,
+               0x10B5, 0x3292,
+               0, 0,
+               (kernel_ulong_t)&card_info_eae_ma1
+       },
+       {
+               0x14BA, 0x6000,
+               PCI_ANY_ID, PCI_ANY_ID,
+               0, 0,
+               (kernel_ulong_t)&card_info_10mbit
+       },
+       {
+               0x10B5, 0x2200,
+               PCI_ANY_ID, PCI_ANY_ID,
+               0, 0,
+               (kernel_ulong_t)&card_info_10mbit
+       },
+       { 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, com20020pci_id_table);
+
+static struct pci_driver com20020pci_driver = {
+       .name           = "com20020",
+       .id_table       = com20020pci_id_table,
+       .probe          = com20020pci_probe,
+       .remove         = com20020pci_remove,
+};
+
+static int __init com20020pci_init(void)
+{
+       BUGLVL(D_NORMAL) printk(VERSION);
+       return pci_register_driver(&com20020pci_driver);
+}
+
+static void __exit com20020pci_cleanup(void)
+{
+       pci_unregister_driver(&com20020pci_driver);
+}
+
+module_init(com20020pci_init)
+module_exit(com20020pci_cleanup)