--- /dev/null
+/*
+ * drivers/mtd/nand/sharpsl.c
+ *
+ * Copyright (C) 2004 Richard Purdie
+ * Copyright (C) 2008 Dmitry Baryshkov
+ *
+ * Based on Sharp's NAND driver sharp_sl.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/genhd.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/sharpsl.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#include <asm/io.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+struct sharpsl_nand {
+ struct mtd_info mtd;
+ struct nand_chip chip;
+
+ void __iomem *io;
+};
+
+#define mtd_to_sharpsl(_mtd) container_of(_mtd, struct sharpsl_nand, mtd)
+
+/* register offset */
+#define ECCLPLB 0x00 /* line parity 7 - 0 bit */
+#define ECCLPUB 0x04 /* line parity 15 - 8 bit */
+#define ECCCP 0x08 /* column parity 5 - 0 bit */
+#define ECCCNTR 0x0C /* ECC byte counter */
+#define ECCCLRR 0x10 /* cleare ECC */
+#define FLASHIO 0x14 /* Flash I/O */
+#define FLASHCTL 0x18 /* Flash Control */
+
+/* Flash control bit */
+#define FLRYBY (1 << 5)
+#define FLCE1 (1 << 4)
+#define FLWP (1 << 3)
+#define FLALE (1 << 2)
+#define FLCLE (1 << 1)
+#define FLCE0 (1 << 0)
+
+/*
+ * hardware specific access to control-lines
+ * ctrl:
+ * NAND_CNE: bit 0 -> ! bit 0 & 4
+ * NAND_CLE: bit 1 -> bit 1
+ * NAND_ALE: bit 2 -> bit 2
+ *
+ */
+static void sharpsl_nand_hwcontrol(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ struct sharpsl_nand *sharpsl = mtd_to_sharpsl(mtd);
+ struct nand_chip *chip = mtd->priv;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ unsigned char bits = ctrl & 0x07;
+
+ bits |= (ctrl & 0x01) << 4;
+
+ bits ^= 0x11;
+
+ writeb((readb(sharpsl->io + FLASHCTL) & ~0x17) | bits, sharpsl->io + FLASHCTL);
+ }
+
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, chip->IO_ADDR_W);
+}
+
+static int sharpsl_nand_dev_ready(struct mtd_info *mtd)
+{
+ struct sharpsl_nand *sharpsl = mtd_to_sharpsl(mtd);
+ return !((readb(sharpsl->io + FLASHCTL) & FLRYBY) == 0);
+}
+
+static void sharpsl_nand_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+ struct sharpsl_nand *sharpsl = mtd_to_sharpsl(mtd);
+ writeb(0, sharpsl->io + ECCCLRR);
+}
+
+static int sharpsl_nand_calculate_ecc(struct mtd_info *mtd, const u_char * dat, u_char * ecc_code)
+{
+ struct sharpsl_nand *sharpsl = mtd_to_sharpsl(mtd);
+ ecc_code[0] = ~readb(sharpsl->io + ECCLPUB);
+ ecc_code[1] = ~readb(sharpsl->io + ECCLPLB);
+ ecc_code[2] = (~readb(sharpsl->io + ECCCP) << 2) | 0x03;
+ return readb(sharpsl->io + ECCCNTR) != 0;
+}
+
+/*
+ * Main initialization routine
+ */
+static int sharpsl_nand_probe(struct platform_device *pdev)
+{
+ struct nand_chip *this;
+ struct resource *r;
+ int err = 0;
+ struct sharpsl_nand *sharpsl;
+ struct sharpsl_nand_platform_data *data = dev_get_platdata(&pdev->dev);
+
+ if (!data) {
+ dev_err(&pdev->dev, "no platform data!\n");
+ return -EINVAL;
+ }
+
+ /* Allocate memory for MTD device structure and private data */
+ sharpsl = kzalloc(sizeof(struct sharpsl_nand), GFP_KERNEL);
+ if (!sharpsl)
+ return -ENOMEM;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r) {
+ dev_err(&pdev->dev, "no io memory resource defined!\n");
+ err = -ENODEV;
+ goto err_get_res;
+ }
+
+ /* map physical address */
+ sharpsl->io = ioremap(r->start, resource_size(r));
+ if (!sharpsl->io) {
+ dev_err(&pdev->dev, "ioremap to access Sharp SL NAND chip failed\n");
+ err = -EIO;
+ goto err_ioremap;
+ }
+
+ /* Get pointer to private data */
+ this = (struct nand_chip *)(&sharpsl->chip);
+
+ /* Link the private data with the MTD structure */
+ sharpsl->mtd.priv = this;
+ sharpsl->mtd.owner = THIS_MODULE;
+
+ platform_set_drvdata(pdev, sharpsl);
+
+ /*
+ * PXA initialize
+ */
+ writeb(readb(sharpsl->io + FLASHCTL) | FLWP, sharpsl->io + FLASHCTL);
+
+ /* Set address of NAND IO lines */
+ this->IO_ADDR_R = sharpsl->io + FLASHIO;
+ this->IO_ADDR_W = sharpsl->io + FLASHIO;
+ /* Set address of hardware control function */
+ this->cmd_ctrl = sharpsl_nand_hwcontrol;
+ this->dev_ready = sharpsl_nand_dev_ready;
+ /* 15 us command delay time */
+ this->chip_delay = 15;
+ /* set eccmode using hardware ECC */
+ this->ecc.mode = NAND_ECC_HW;
+ this->ecc.size = 256;
+ this->ecc.bytes = 3;
+ this->ecc.strength = 1;
+ this->badblock_pattern = data->badblock_pattern;
+ this->ecc.layout = data->ecc_layout;
+ this->ecc.hwctl = sharpsl_nand_enable_hwecc;
+ this->ecc.calculate = sharpsl_nand_calculate_ecc;
+ this->ecc.correct = nand_correct_data;
+
+ /* Scan to find existence of the device */
+ err = nand_scan(&sharpsl->mtd, 1);
+ if (err)
+ goto err_scan;
+
+ /* Register the partitions */
+ sharpsl->mtd.name = "sharpsl-nand";
+
+ err = mtd_device_parse_register(&sharpsl->mtd, NULL, NULL,
+ data->partitions, data->nr_partitions);
+ if (err)
+ goto err_add;
+
+ /* Return happy */
+ return 0;
+
+err_add:
+ nand_release(&sharpsl->mtd);
+
+err_scan:
+ iounmap(sharpsl->io);
+err_ioremap:
+err_get_res:
+ kfree(sharpsl);
+ return err;
+}
+
+/*
+ * Clean up routine
+ */
+static int sharpsl_nand_remove(struct platform_device *pdev)
+{
+ struct sharpsl_nand *sharpsl = platform_get_drvdata(pdev);
+
+ /* Release resources, unregister device */
+ nand_release(&sharpsl->mtd);
+
+ iounmap(sharpsl->io);
+
+ /* Free the MTD device structure */
+ kfree(sharpsl);
+
+ return 0;
+}
+
+static struct platform_driver sharpsl_nand_driver = {
+ .driver = {
+ .name = "sharpsl-nand",
+ },
+ .probe = sharpsl_nand_probe,
+ .remove = sharpsl_nand_remove,
+};
+
+module_platform_driver(sharpsl_nand_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>");
+MODULE_DESCRIPTION("Device specific logic for NAND flash on Sharp SL-C7xx Series");
Code Review / kvmfornfv.git / blobdiff