Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / misc / mei / pci-txe.c
diff --git a/kernel/drivers/misc/mei/pci-txe.c b/kernel/drivers/misc/mei/pci-txe.c
new file mode 100644 (file)
index 0000000..dcfcba4
--- /dev/null
@@ -0,0 +1,436 @@
+/*
+ *
+ * Intel Management Engine Interface (Intel MEI) Linux driver
+ * Copyright (c) 2013-2014, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/uuid.h>
+#include <linux/jiffies.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/pm_runtime.h>
+
+#include <linux/mei.h>
+
+
+#include "mei_dev.h"
+#include "hw-txe.h"
+
+static const struct pci_device_id mei_txe_pci_tbl[] = {
+       {PCI_VDEVICE(INTEL, 0x0F18)}, /* Baytrail */
+       {PCI_VDEVICE(INTEL, 0x2298)}, /* Cherrytrail */
+
+       {0, }
+};
+MODULE_DEVICE_TABLE(pci, mei_txe_pci_tbl);
+
+#ifdef CONFIG_PM
+static inline void mei_txe_set_pm_domain(struct mei_device *dev);
+static inline void mei_txe_unset_pm_domain(struct mei_device *dev);
+#else
+static inline void mei_txe_set_pm_domain(struct mei_device *dev) {}
+static inline void mei_txe_unset_pm_domain(struct mei_device *dev) {}
+#endif /* CONFIG_PM */
+
+static void mei_txe_pci_iounmap(struct pci_dev *pdev, struct mei_txe_hw *hw)
+{
+       int i;
+
+       for (i = SEC_BAR; i < NUM_OF_MEM_BARS; i++) {
+               if (hw->mem_addr[i]) {
+                       pci_iounmap(pdev, hw->mem_addr[i]);
+                       hw->mem_addr[i] = NULL;
+               }
+       }
+}
+/**
+ * mei_txe_probe - Device Initialization Routine
+ *
+ * @pdev: PCI device structure
+ * @ent: entry in mei_txe_pci_tbl
+ *
+ * Return: 0 on success, <0 on failure.
+ */
+static int mei_txe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+       struct mei_device *dev;
+       struct mei_txe_hw *hw;
+       int err;
+       int i;
+
+       /* enable pci dev */
+       err = pci_enable_device(pdev);
+       if (err) {
+               dev_err(&pdev->dev, "failed to enable pci device.\n");
+               goto end;
+       }
+       /* set PCI host mastering  */
+       pci_set_master(pdev);
+       /* pci request regions for mei driver */
+       err = pci_request_regions(pdev, KBUILD_MODNAME);
+       if (err) {
+               dev_err(&pdev->dev, "failed to get pci regions.\n");
+               goto disable_device;
+       }
+
+       err = pci_set_dma_mask(pdev, DMA_BIT_MASK(36));
+       if (err) {
+               err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+               if (err) {
+                       dev_err(&pdev->dev, "No suitable DMA available.\n");
+                       goto release_regions;
+               }
+       }
+
+       /* allocates and initializes the mei dev structure */
+       dev = mei_txe_dev_init(pdev);
+       if (!dev) {
+               err = -ENOMEM;
+               goto release_regions;
+       }
+       hw = to_txe_hw(dev);
+
+       /* mapping  IO device memory */
+       for (i = SEC_BAR; i < NUM_OF_MEM_BARS; i++) {
+               hw->mem_addr[i] = pci_iomap(pdev, i, 0);
+               if (!hw->mem_addr[i]) {
+                       dev_err(&pdev->dev, "mapping I/O device memory failure.\n");
+                       err = -ENOMEM;
+                       goto free_device;
+               }
+       }
+
+
+       pci_enable_msi(pdev);
+
+       /* clear spurious interrupts */
+       mei_clear_interrupts(dev);
+
+       /* request and enable interrupt  */
+       if (pci_dev_msi_enabled(pdev))
+               err = request_threaded_irq(pdev->irq,
+                       NULL,
+                       mei_txe_irq_thread_handler,
+                       IRQF_ONESHOT, KBUILD_MODNAME, dev);
+       else
+               err = request_threaded_irq(pdev->irq,
+                       mei_txe_irq_quick_handler,
+                       mei_txe_irq_thread_handler,
+                       IRQF_SHARED, KBUILD_MODNAME, dev);
+       if (err) {
+               dev_err(&pdev->dev, "mei: request_threaded_irq failure. irq = %d\n",
+                       pdev->irq);
+               goto free_device;
+       }
+
+       if (mei_start(dev)) {
+               dev_err(&pdev->dev, "init hw failure.\n");
+               err = -ENODEV;
+               goto release_irq;
+       }
+
+       pm_runtime_set_autosuspend_delay(&pdev->dev, MEI_TXI_RPM_TIMEOUT);
+       pm_runtime_use_autosuspend(&pdev->dev);
+
+       err = mei_register(dev, &pdev->dev);
+       if (err)
+               goto release_irq;
+
+       pci_set_drvdata(pdev, dev);
+
+       /*
+       * For not wake-able HW runtime pm framework
+       * can't be used on pci device level.
+       * Use domain runtime pm callbacks instead.
+       */
+       if (!pci_dev_run_wake(pdev))
+               mei_txe_set_pm_domain(dev);
+
+       pm_runtime_put_noidle(&pdev->dev);
+
+       return 0;
+
+release_irq:
+
+       mei_cancel_work(dev);
+
+       /* disable interrupts */
+       mei_disable_interrupts(dev);
+
+       free_irq(pdev->irq, dev);
+       pci_disable_msi(pdev);
+
+free_device:
+       mei_txe_pci_iounmap(pdev, hw);
+
+       kfree(dev);
+release_regions:
+       pci_release_regions(pdev);
+disable_device:
+       pci_disable_device(pdev);
+end:
+       dev_err(&pdev->dev, "initialization failed.\n");
+       return err;
+}
+
+/**
+ * mei_txe_remove - Device Removal Routine
+ *
+ * @pdev: PCI device structure
+ *
+ * mei_remove is called by the PCI subsystem to alert the driver
+ * that it should release a PCI device.
+ */
+static void mei_txe_remove(struct pci_dev *pdev)
+{
+       struct mei_device *dev;
+       struct mei_txe_hw *hw;
+
+       dev = pci_get_drvdata(pdev);
+       if (!dev) {
+               dev_err(&pdev->dev, "mei: dev =NULL\n");
+               return;
+       }
+
+       pm_runtime_get_noresume(&pdev->dev);
+
+       hw = to_txe_hw(dev);
+
+       mei_stop(dev);
+
+       if (!pci_dev_run_wake(pdev))
+               mei_txe_unset_pm_domain(dev);
+
+       /* disable interrupts */
+       mei_disable_interrupts(dev);
+       free_irq(pdev->irq, dev);
+       pci_disable_msi(pdev);
+
+       pci_set_drvdata(pdev, NULL);
+
+       mei_txe_pci_iounmap(pdev, hw);
+
+       mei_deregister(dev);
+
+       kfree(dev);
+
+       pci_release_regions(pdev);
+       pci_disable_device(pdev);
+}
+
+
+#ifdef CONFIG_PM_SLEEP
+static int mei_txe_pci_suspend(struct device *device)
+{
+       struct pci_dev *pdev = to_pci_dev(device);
+       struct mei_device *dev = pci_get_drvdata(pdev);
+
+       if (!dev)
+               return -ENODEV;
+
+       dev_dbg(&pdev->dev, "suspend\n");
+
+       mei_stop(dev);
+
+       mei_disable_interrupts(dev);
+
+       free_irq(pdev->irq, dev);
+       pci_disable_msi(pdev);
+
+       return 0;
+}
+
+static int mei_txe_pci_resume(struct device *device)
+{
+       struct pci_dev *pdev = to_pci_dev(device);
+       struct mei_device *dev;
+       int err;
+
+       dev = pci_get_drvdata(pdev);
+       if (!dev)
+               return -ENODEV;
+
+       pci_enable_msi(pdev);
+
+       mei_clear_interrupts(dev);
+
+       /* request and enable interrupt */
+       if (pci_dev_msi_enabled(pdev))
+               err = request_threaded_irq(pdev->irq,
+                       NULL,
+                       mei_txe_irq_thread_handler,
+                       IRQF_ONESHOT, KBUILD_MODNAME, dev);
+       else
+               err = request_threaded_irq(pdev->irq,
+                       mei_txe_irq_quick_handler,
+                       mei_txe_irq_thread_handler,
+                       IRQF_SHARED, KBUILD_MODNAME, dev);
+       if (err) {
+               dev_err(&pdev->dev, "request_threaded_irq failed: irq = %d.\n",
+                               pdev->irq);
+               return err;
+       }
+
+       err = mei_restart(dev);
+
+       return err;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+#ifdef CONFIG_PM
+static int mei_txe_pm_runtime_idle(struct device *device)
+{
+       struct pci_dev *pdev = to_pci_dev(device);
+       struct mei_device *dev;
+
+       dev_dbg(&pdev->dev, "rpm: txe: runtime_idle\n");
+
+       dev = pci_get_drvdata(pdev);
+       if (!dev)
+               return -ENODEV;
+       if (mei_write_is_idle(dev))
+               pm_runtime_autosuspend(device);
+
+       return -EBUSY;
+}
+static int mei_txe_pm_runtime_suspend(struct device *device)
+{
+       struct pci_dev *pdev = to_pci_dev(device);
+       struct mei_device *dev;
+       int ret;
+
+       dev_dbg(&pdev->dev, "rpm: txe: runtime suspend\n");
+
+       dev = pci_get_drvdata(pdev);
+       if (!dev)
+               return -ENODEV;
+
+       mutex_lock(&dev->device_lock);
+
+       if (mei_write_is_idle(dev))
+               ret = mei_txe_aliveness_set_sync(dev, 0);
+       else
+               ret = -EAGAIN;
+
+       /*
+        * If everything is okay we're about to enter PCI low
+        * power state (D3) therefor we need to disable the
+        * interrupts towards host.
+        * However if device is not wakeable we do not enter
+        * D-low state and we need to keep the interrupt kicking
+        */
+        if (!ret && pci_dev_run_wake(pdev))
+               mei_disable_interrupts(dev);
+
+       dev_dbg(&pdev->dev, "rpm: txe: runtime suspend ret=%d\n", ret);
+
+       mutex_unlock(&dev->device_lock);
+       return ret;
+}
+
+static int mei_txe_pm_runtime_resume(struct device *device)
+{
+       struct pci_dev *pdev = to_pci_dev(device);
+       struct mei_device *dev;
+       int ret;
+
+       dev_dbg(&pdev->dev, "rpm: txe: runtime resume\n");
+
+       dev = pci_get_drvdata(pdev);
+       if (!dev)
+               return -ENODEV;
+
+       mutex_lock(&dev->device_lock);
+
+       mei_enable_interrupts(dev);
+
+       ret = mei_txe_aliveness_set_sync(dev, 1);
+
+       mutex_unlock(&dev->device_lock);
+
+       dev_dbg(&pdev->dev, "rpm: txe: runtime resume ret = %d\n", ret);
+
+       return ret;
+}
+
+/**
+ * mei_txe_set_pm_domain - fill and set pm domain structure for device
+ *
+ * @dev: mei_device
+ */
+static inline void mei_txe_set_pm_domain(struct mei_device *dev)
+{
+       struct pci_dev *pdev  = to_pci_dev(dev->dev);
+
+       if (pdev->dev.bus && pdev->dev.bus->pm) {
+               dev->pg_domain.ops = *pdev->dev.bus->pm;
+
+               dev->pg_domain.ops.runtime_suspend = mei_txe_pm_runtime_suspend;
+               dev->pg_domain.ops.runtime_resume = mei_txe_pm_runtime_resume;
+               dev->pg_domain.ops.runtime_idle = mei_txe_pm_runtime_idle;
+
+               pdev->dev.pm_domain = &dev->pg_domain;
+       }
+}
+
+/**
+ * mei_txe_unset_pm_domain - clean pm domain structure for device
+ *
+ * @dev: mei_device
+ */
+static inline void mei_txe_unset_pm_domain(struct mei_device *dev)
+{
+       /* stop using pm callbacks if any */
+       dev->dev->pm_domain = NULL;
+}
+
+static const struct dev_pm_ops mei_txe_pm_ops = {
+       SET_SYSTEM_SLEEP_PM_OPS(mei_txe_pci_suspend,
+                               mei_txe_pci_resume)
+       SET_RUNTIME_PM_OPS(
+               mei_txe_pm_runtime_suspend,
+               mei_txe_pm_runtime_resume,
+               mei_txe_pm_runtime_idle)
+};
+
+#define MEI_TXE_PM_OPS (&mei_txe_pm_ops)
+#else
+#define MEI_TXE_PM_OPS NULL
+#endif /* CONFIG_PM */
+
+/*
+ *  PCI driver structure
+ */
+static struct pci_driver mei_txe_driver = {
+       .name = KBUILD_MODNAME,
+       .id_table = mei_txe_pci_tbl,
+       .probe = mei_txe_probe,
+       .remove = mei_txe_remove,
+       .shutdown = mei_txe_remove,
+       .driver.pm = MEI_TXE_PM_OPS,
+};
+
+module_pci_driver(mei_txe_driver);
+
+MODULE_AUTHOR("Intel Corporation");
+MODULE_DESCRIPTION("Intel(R) Trusted Execution Environment Interface");
+MODULE_LICENSE("GPL v2");