Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / misc / isl29020.c
diff --git a/kernel/drivers/misc/isl29020.c b/kernel/drivers/misc/isl29020.c
new file mode 100644 (file)
index 0000000..4a9c50a
--- /dev/null
@@ -0,0 +1,238 @@
+/*
+ * isl29020.c - Intersil  ALS Driver
+ *
+ * Copyright (C) 2008 Intel Corp
+ *
+ *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * Data sheet at: http://www.intersil.com/data/fn/fn6505.pdf
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/sysfs.h>
+#include <linux/pm_runtime.h>
+
+static DEFINE_MUTEX(mutex);
+
+static ssize_t als_sensing_range_show(struct device *dev,
+                       struct device_attribute *attr,  char *buf)
+{
+       struct i2c_client *client = to_i2c_client(dev);
+       int  val;
+
+       val = i2c_smbus_read_byte_data(client, 0x00);
+
+       if (val < 0)
+               return val;
+       return sprintf(buf, "%d000\n", 1 << (2 * (val & 3)));
+
+}
+
+static ssize_t als_lux_input_data_show(struct device *dev,
+                       struct device_attribute *attr, char *buf)
+{
+       struct i2c_client *client = to_i2c_client(dev);
+       int ret_val, val;
+       unsigned long int lux;
+       int temp;
+
+       pm_runtime_get_sync(dev);
+       msleep(100);
+
+       mutex_lock(&mutex);
+       temp = i2c_smbus_read_byte_data(client, 0x02); /* MSB data */
+       if (temp < 0) {
+               pm_runtime_put_sync(dev);
+               mutex_unlock(&mutex);
+               return temp;
+       }
+
+       ret_val = i2c_smbus_read_byte_data(client, 0x01); /* LSB data */
+       mutex_unlock(&mutex);
+
+       if (ret_val < 0) {
+               pm_runtime_put_sync(dev);
+               return ret_val;
+       }
+
+       ret_val |= temp << 8;
+       val = i2c_smbus_read_byte_data(client, 0x00);
+       pm_runtime_put_sync(dev);
+       if (val < 0)
+               return val;
+       lux = ((((1 << (2 * (val & 3))))*1000) * ret_val) / 65536;
+       return sprintf(buf, "%ld\n", lux);
+}
+
+static ssize_t als_sensing_range_store(struct device *dev,
+               struct device_attribute *attr, const  char *buf, size_t count)
+{
+       struct i2c_client *client = to_i2c_client(dev);
+       int ret_val;
+       unsigned long val;
+
+       ret_val = kstrtoul(buf, 10, &val);
+       if (ret_val)
+               return ret_val;
+
+       if (val < 1 || val > 64000)
+               return -EINVAL;
+
+       /* Pick the smallest sensor range that will meet our requirements */
+       if (val <= 1000)
+               val = 1;
+       else if (val <= 4000)
+               val = 2;
+       else if (val <= 16000)
+               val = 3;
+       else
+               val = 4;
+
+       ret_val = i2c_smbus_read_byte_data(client, 0x00);
+       if (ret_val < 0)
+               return ret_val;
+
+       ret_val &= 0xFC; /*reset the bit before setting them */
+       ret_val |= val - 1;
+       ret_val = i2c_smbus_write_byte_data(client, 0x00, ret_val);
+
+       if (ret_val < 0)
+               return ret_val;
+       return count;
+}
+
+static void als_set_power_state(struct i2c_client *client, int enable)
+{
+       int ret_val;
+
+       ret_val = i2c_smbus_read_byte_data(client, 0x00);
+       if (ret_val < 0)
+               return;
+
+       if (enable)
+               ret_val |= 0x80;
+       else
+               ret_val &= 0x7F;
+
+       i2c_smbus_write_byte_data(client, 0x00, ret_val);
+}
+
+static DEVICE_ATTR(lux0_sensor_range, S_IRUGO | S_IWUSR,
+       als_sensing_range_show, als_sensing_range_store);
+static DEVICE_ATTR(lux0_input, S_IRUGO, als_lux_input_data_show, NULL);
+
+static struct attribute *mid_att_als[] = {
+       &dev_attr_lux0_sensor_range.attr,
+       &dev_attr_lux0_input.attr,
+       NULL
+};
+
+static struct attribute_group m_als_gr = {
+       .name = "isl29020",
+       .attrs = mid_att_als
+};
+
+static int als_set_default_config(struct i2c_client *client)
+{
+       int retval;
+
+       retval = i2c_smbus_write_byte_data(client, 0x00, 0xc0);
+       if (retval < 0) {
+               dev_err(&client->dev, "default write failed.");
+               return retval;
+       }
+       return 0;
+}
+
+static int  isl29020_probe(struct i2c_client *client,
+                                       const struct i2c_device_id *id)
+{
+       int res;
+
+       res = als_set_default_config(client);
+       if (res <  0)
+               return res;
+
+       res = sysfs_create_group(&client->dev.kobj, &m_als_gr);
+       if (res) {
+               dev_err(&client->dev, "isl29020: device create file failed\n");
+               return res;
+       }
+       dev_info(&client->dev, "%s isl29020: ALS chip found\n", client->name);
+       als_set_power_state(client, 0);
+       pm_runtime_enable(&client->dev);
+       return res;
+}
+
+static int isl29020_remove(struct i2c_client *client)
+{
+       sysfs_remove_group(&client->dev.kobj, &m_als_gr);
+       return 0;
+}
+
+static struct i2c_device_id isl29020_id[] = {
+       { "isl29020", 0 },
+       { }
+};
+
+MODULE_DEVICE_TABLE(i2c, isl29020_id);
+
+#ifdef CONFIG_PM
+
+static int isl29020_runtime_suspend(struct device *dev)
+{
+       struct i2c_client *client = to_i2c_client(dev);
+       als_set_power_state(client, 0);
+       return 0;
+}
+
+static int isl29020_runtime_resume(struct device *dev)
+{
+       struct i2c_client *client = to_i2c_client(dev);
+       als_set_power_state(client, 1);
+       return 0;
+}
+
+static const struct dev_pm_ops isl29020_pm_ops = {
+       .runtime_suspend = isl29020_runtime_suspend,
+       .runtime_resume = isl29020_runtime_resume,
+};
+
+#define ISL29020_PM_OPS (&isl29020_pm_ops)
+#else  /* CONFIG_PM */
+#define ISL29020_PM_OPS NULL
+#endif /* CONFIG_PM */
+
+static struct i2c_driver isl29020_driver = {
+       .driver = {
+               .name = "isl29020",
+               .pm = ISL29020_PM_OPS,
+       },
+       .probe = isl29020_probe,
+       .remove = isl29020_remove,
+       .id_table = isl29020_id,
+};
+
+module_i2c_driver(isl29020_driver);
+
+MODULE_AUTHOR("Kalhan Trisal <kalhan.trisal@intel.com>");
+MODULE_DESCRIPTION("Intersil isl29020 ALS Driver");
+MODULE_LICENSE("GPL v2");