--- /dev/null
+/*
+ * apds9802als.c - apds9802 ALS Driver
+ *
+ * Copyright (C) 2009 Intel Corp
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/sysfs.h>
+#include <linux/pm_runtime.h>
+
+#define ALS_MIN_RANGE_VAL 1
+#define ALS_MAX_RANGE_VAL 2
+#define POWER_STA_ENABLE 1
+#define POWER_STA_DISABLE 0
+
+#define DRIVER_NAME "apds9802als"
+
+struct als_data {
+ struct mutex mutex;
+};
+
+static ssize_t als_sensing_range_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ int val;
+
+ val = i2c_smbus_read_byte_data(client, 0x81);
+ if (val < 0)
+ return val;
+ if (val & 1)
+ return sprintf(buf, "4095\n");
+ else
+ return sprintf(buf, "65535\n");
+}
+
+static int als_wait_for_data_ready(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ int ret;
+ int retry = 10;
+
+ do {
+ msleep(30);
+ ret = i2c_smbus_read_byte_data(client, 0x86);
+ } while (!(ret & 0x80) && retry--);
+
+ if (retry < 0) {
+ dev_warn(dev, "timeout waiting for data ready\n");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static ssize_t als_lux0_input_data_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct als_data *data = i2c_get_clientdata(client);
+ int ret_val;
+ int temp;
+
+ /* Protect against parallel reads */
+ pm_runtime_get_sync(dev);
+ mutex_lock(&data->mutex);
+
+ /* clear EOC interrupt status */
+ i2c_smbus_write_byte(client, 0x40);
+ /* start measurement */
+ temp = i2c_smbus_read_byte_data(client, 0x81);
+ i2c_smbus_write_byte_data(client, 0x81, temp | 0x08);
+
+ ret_val = als_wait_for_data_ready(dev);
+ if (ret_val < 0)
+ goto failed;
+
+ temp = i2c_smbus_read_byte_data(client, 0x8C); /* LSB data */
+ if (temp < 0) {
+ ret_val = temp;
+ goto failed;
+ }
+ ret_val = i2c_smbus_read_byte_data(client, 0x8D); /* MSB data */
+ if (ret_val < 0)
+ goto failed;
+
+ mutex_unlock(&data->mutex);
+ pm_runtime_put_sync(dev);
+
+ temp = (ret_val << 8) | temp;
+ return sprintf(buf, "%d\n", temp);
+failed:
+ mutex_unlock(&data->mutex);
+ pm_runtime_put_sync(dev);
+ return ret_val;
+}
+
+static ssize_t als_sensing_range_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct als_data *data = i2c_get_clientdata(client);
+ int ret_val;
+ unsigned long val;
+
+ ret_val = kstrtoul(buf, 10, &val);
+ if (ret_val)
+ return ret_val;
+
+ if (val < 4096)
+ val = 1;
+ else if (val < 65536)
+ val = 2;
+ else
+ return -ERANGE;
+
+ pm_runtime_get_sync(dev);
+
+ /* Make sure nobody else reads/modifies/writes 0x81 while we
+ are active */
+ mutex_lock(&data->mutex);
+
+ ret_val = i2c_smbus_read_byte_data(client, 0x81);
+ if (ret_val < 0)
+ goto fail;
+
+ /* Reset the bits before setting them */
+ ret_val = ret_val & 0xFA;
+
+ if (val == 1) /* Setting detection range up to 4k LUX */
+ ret_val = (ret_val | 0x01);
+ else /* Setting detection range up to 64k LUX*/
+ ret_val = (ret_val | 0x00);
+
+ ret_val = i2c_smbus_write_byte_data(client, 0x81, ret_val);
+
+ if (ret_val >= 0) {
+ /* All OK */
+ mutex_unlock(&data->mutex);
+ pm_runtime_put_sync(dev);
+ return count;
+ }
+fail:
+ mutex_unlock(&data->mutex);
+ pm_runtime_put_sync(dev);
+ return ret_val;
+}
+
+static int als_set_power_state(struct i2c_client *client, bool on_off)
+{
+ int ret_val;
+ struct als_data *data = i2c_get_clientdata(client);
+
+ mutex_lock(&data->mutex);
+ ret_val = i2c_smbus_read_byte_data(client, 0x80);
+ if (ret_val < 0)
+ goto fail;
+ if (on_off)
+ ret_val = ret_val | 0x01;
+ else
+ ret_val = ret_val & 0xFE;
+ ret_val = i2c_smbus_write_byte_data(client, 0x80, ret_val);
+fail:
+ mutex_unlock(&data->mutex);
+ return ret_val;
+}
+
+static DEVICE_ATTR(lux0_sensor_range, S_IRUGO | S_IWUSR,
+ als_sensing_range_show, als_sensing_range_store);
+static DEVICE_ATTR(lux0_input, S_IRUGO, als_lux0_input_data_show, NULL);
+
+static struct attribute *mid_att_als[] = {
+ &dev_attr_lux0_sensor_range.attr,
+ &dev_attr_lux0_input.attr,
+ NULL
+};
+
+static struct attribute_group m_als_gr = {
+ .name = "apds9802als",
+ .attrs = mid_att_als
+};
+
+static int als_set_default_config(struct i2c_client *client)
+{
+ int ret_val;
+ /* Write the command and then switch on */
+ ret_val = i2c_smbus_write_byte_data(client, 0x80, 0x01);
+ if (ret_val < 0) {
+ dev_err(&client->dev, "failed default switch on write\n");
+ return ret_val;
+ }
+ /* detection range: 1~64K Lux, maunal measurement */
+ ret_val = i2c_smbus_write_byte_data(client, 0x81, 0x08);
+ if (ret_val < 0)
+ dev_err(&client->dev, "failed default LUX on write\n");
+
+ /* We always get 0 for the 1st measurement after system power on,
+ * so make sure it is finished before user asks for data.
+ */
+ als_wait_for_data_ready(&client->dev);
+
+ return ret_val;
+}
+
+static int apds9802als_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int res;
+ struct als_data *data;
+
+ data = kzalloc(sizeof(struct als_data), GFP_KERNEL);
+ if (data == NULL) {
+ dev_err(&client->dev, "Memory allocation failed\n");
+ return -ENOMEM;
+ }
+ i2c_set_clientdata(client, data);
+ res = sysfs_create_group(&client->dev.kobj, &m_als_gr);
+ if (res) {
+ dev_err(&client->dev, "device create file failed\n");
+ goto als_error1;
+ }
+ dev_info(&client->dev, "ALS chip found\n");
+ als_set_default_config(client);
+ mutex_init(&data->mutex);
+
+ pm_runtime_set_active(&client->dev);
+ pm_runtime_enable(&client->dev);
+
+ return res;
+als_error1:
+ kfree(data);
+ return res;
+}
+
+static int apds9802als_remove(struct i2c_client *client)
+{
+ struct als_data *data = i2c_get_clientdata(client);
+
+ pm_runtime_get_sync(&client->dev);
+
+ als_set_power_state(client, false);
+ sysfs_remove_group(&client->dev.kobj, &m_als_gr);
+
+ pm_runtime_disable(&client->dev);
+ pm_runtime_set_suspended(&client->dev);
+ pm_runtime_put_noidle(&client->dev);
+
+ kfree(data);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int apds9802als_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+
+ als_set_power_state(client, false);
+ return 0;
+}
+
+static int apds9802als_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+
+ als_set_power_state(client, true);
+ return 0;
+}
+
+static UNIVERSAL_DEV_PM_OPS(apds9802als_pm_ops, apds9802als_suspend,
+ apds9802als_resume, NULL);
+
+#define APDS9802ALS_PM_OPS (&apds9802als_pm_ops)
+
+#else /* CONFIG_PM */
+#define APDS9802ALS_PM_OPS NULL
+#endif /* CONFIG_PM */
+
+static struct i2c_device_id apds9802als_id[] = {
+ { DRIVER_NAME, 0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(i2c, apds9802als_id);
+
+static struct i2c_driver apds9802als_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .pm = APDS9802ALS_PM_OPS,
+ },
+ .probe = apds9802als_probe,
+ .remove = apds9802als_remove,
+ .id_table = apds9802als_id,
+};
+
+module_i2c_driver(apds9802als_driver);
+
+MODULE_AUTHOR("Anantha Narayanan <Anantha.Narayanan@intel.com");
+MODULE_DESCRIPTION("Avago apds9802als ALS Driver");
+MODULE_LICENSE("GPL v2");
Code Review / kvmfornfv.git / blobdiff