--- /dev/null
+/*
+ * Core driver for TPS61050/61052 boost converters, used for while LED
+ * driving, audio power amplification, white LED flash, and generic
+ * boost conversion. Additionally it provides a 1-bit GPIO pin (out or in)
+ * and a flash synchronization pin to synchronize flash events when used as
+ * flashgun.
+ *
+ * Copyright (C) 2011 ST-Ericsson SA
+ * Written on behalf of Linaro for ST-Ericsson
+ *
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/gpio.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/regulator/driver.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/tps6105x.h>
+
+int tps6105x_set(struct tps6105x *tps6105x, u8 reg, u8 value)
+{
+ int ret;
+
+ ret = mutex_lock_interruptible(&tps6105x->lock);
+ if (ret)
+ return ret;
+ ret = i2c_smbus_write_byte_data(tps6105x->client, reg, value);
+ mutex_unlock(&tps6105x->lock);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+EXPORT_SYMBOL(tps6105x_set);
+
+int tps6105x_get(struct tps6105x *tps6105x, u8 reg, u8 *buf)
+{
+ int ret;
+
+ ret = mutex_lock_interruptible(&tps6105x->lock);
+ if (ret)
+ return ret;
+ ret = i2c_smbus_read_byte_data(tps6105x->client, reg);
+ mutex_unlock(&tps6105x->lock);
+ if (ret < 0)
+ return ret;
+
+ *buf = ret;
+ return 0;
+}
+EXPORT_SYMBOL(tps6105x_get);
+
+/*
+ * Masks off the bits in the mask and sets the bits in the bitvalues
+ * parameter in one atomic operation
+ */
+int tps6105x_mask_and_set(struct tps6105x *tps6105x, u8 reg,
+ u8 bitmask, u8 bitvalues)
+{
+ int ret;
+ u8 regval;
+
+ ret = mutex_lock_interruptible(&tps6105x->lock);
+ if (ret)
+ return ret;
+ ret = i2c_smbus_read_byte_data(tps6105x->client, reg);
+ if (ret < 0)
+ goto fail;
+ regval = ret;
+ regval = (~bitmask & regval) | (bitmask & bitvalues);
+ ret = i2c_smbus_write_byte_data(tps6105x->client, reg, regval);
+fail:
+ mutex_unlock(&tps6105x->lock);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+EXPORT_SYMBOL(tps6105x_mask_and_set);
+
+static int tps6105x_startup(struct tps6105x *tps6105x)
+{
+ int ret;
+ u8 regval;
+
+ ret = tps6105x_get(tps6105x, TPS6105X_REG_0, ®val);
+ if (ret)
+ return ret;
+ switch (regval >> TPS6105X_REG0_MODE_SHIFT) {
+ case TPS6105X_REG0_MODE_SHUTDOWN:
+ dev_info(&tps6105x->client->dev,
+ "TPS6105x found in SHUTDOWN mode\n");
+ break;
+ case TPS6105X_REG0_MODE_TORCH:
+ dev_info(&tps6105x->client->dev,
+ "TPS6105x found in TORCH mode\n");
+ break;
+ case TPS6105X_REG0_MODE_TORCH_FLASH:
+ dev_info(&tps6105x->client->dev,
+ "TPS6105x found in FLASH mode\n");
+ break;
+ case TPS6105X_REG0_MODE_VOLTAGE:
+ dev_info(&tps6105x->client->dev,
+ "TPS6105x found in VOLTAGE mode\n");
+ break;
+ default:
+ break;
+ }
+
+ return ret;
+}
+
+/*
+ * MFD cells - we have one cell which is selected operation
+ * mode, and we always have a GPIO cell.
+ */
+static struct mfd_cell tps6105x_cells[] = {
+ {
+ /* name will be runtime assigned */
+ .id = -1,
+ },
+ {
+ .name = "tps6105x-gpio",
+ .id = -1,
+ },
+};
+
+static int tps6105x_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct tps6105x *tps6105x;
+ struct tps6105x_platform_data *pdata;
+ int ret;
+ int i;
+
+ tps6105x = devm_kmalloc(&client->dev, sizeof(*tps6105x), GFP_KERNEL);
+ if (!tps6105x)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, tps6105x);
+ tps6105x->client = client;
+ pdata = dev_get_platdata(&client->dev);
+ tps6105x->pdata = pdata;
+ mutex_init(&tps6105x->lock);
+
+ ret = tps6105x_startup(tps6105x);
+ if (ret) {
+ dev_err(&client->dev, "chip initialization failed\n");
+ return ret;
+ }
+
+ /* Remove warning texts when you implement new cell drivers */
+ switch (pdata->mode) {
+ case TPS6105X_MODE_SHUTDOWN:
+ dev_info(&client->dev,
+ "present, not used for anything, only GPIO\n");
+ break;
+ case TPS6105X_MODE_TORCH:
+ tps6105x_cells[0].name = "tps6105x-leds";
+ dev_warn(&client->dev,
+ "torch mode is unsupported\n");
+ break;
+ case TPS6105X_MODE_TORCH_FLASH:
+ tps6105x_cells[0].name = "tps6105x-flash";
+ dev_warn(&client->dev,
+ "flash mode is unsupported\n");
+ break;
+ case TPS6105X_MODE_VOLTAGE:
+ tps6105x_cells[0].name ="tps6105x-regulator";
+ break;
+ default:
+ break;
+ }
+
+ /* Set up and register the platform devices. */
+ for (i = 0; i < ARRAY_SIZE(tps6105x_cells); i++) {
+ /* One state holder for all drivers, this is simple */
+ tps6105x_cells[i].platform_data = tps6105x;
+ tps6105x_cells[i].pdata_size = sizeof(*tps6105x);
+ }
+
+ return mfd_add_devices(&client->dev, 0, tps6105x_cells,
+ ARRAY_SIZE(tps6105x_cells), NULL, 0, NULL);
+}
+
+static int tps6105x_remove(struct i2c_client *client)
+{
+ struct tps6105x *tps6105x = i2c_get_clientdata(client);
+
+ mfd_remove_devices(&client->dev);
+
+ /* Put chip in shutdown mode */
+ tps6105x_mask_and_set(tps6105x, TPS6105X_REG_0,
+ TPS6105X_REG0_MODE_MASK,
+ TPS6105X_MODE_SHUTDOWN << TPS6105X_REG0_MODE_SHIFT);
+
+ return 0;
+}
+
+static const struct i2c_device_id tps6105x_id[] = {
+ { "tps61050", 0 },
+ { "tps61052", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, tps6105x_id);
+
+static struct i2c_driver tps6105x_driver = {
+ .driver = {
+ .name = "tps6105x",
+ },
+ .probe = tps6105x_probe,
+ .remove = tps6105x_remove,
+ .id_table = tps6105x_id,
+};
+
+static int __init tps6105x_init(void)
+{
+ return i2c_add_driver(&tps6105x_driver);
+}
+subsys_initcall(tps6105x_init);
+
+static void __exit tps6105x_exit(void)
+{
+ i2c_del_driver(&tps6105x_driver);
+}
+module_exit(tps6105x_exit);
+
+MODULE_AUTHOR("Linus Walleij");
+MODULE_DESCRIPTION("TPS6105x White LED Boost Converter Driver");
+MODULE_LICENSE("GPL v2");
Code Review / kvmfornfv.git / blobdiff