Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / message / fusion / mptscsih.h
diff --git a/kernel/drivers/message/fusion/mptscsih.h b/kernel/drivers/message/fusion/mptscsih.h
new file mode 100644 (file)
index 0000000..2baeefd
--- /dev/null
@@ -0,0 +1,137 @@
+/*
+ *  linux/drivers/message/fusion/mptscsih.h
+ *      High performance SCSI / Fibre Channel SCSI Host device driver.
+ *      For use with PCI chip/adapter(s):
+ *          LSIFC9xx/LSI409xx Fibre Channel
+ *      running LSI Fusion MPT (Message Passing Technology) firmware.
+ *
+ *  Copyright (c) 1999-2008 LSI Corporation
+ *  (mailto:DL-MPTFusionLinux@lsi.com)
+ *
+ */
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; version 2 of the License.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    NO WARRANTY
+    THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+    CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+    LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+    MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+    solely responsible for determining the appropriateness of using and
+    distributing the Program and assumes all risks associated with its
+    exercise of rights under this Agreement, including but not limited to
+    the risks and costs of program errors, damage to or loss of data,
+    programs or equipment, and unavailability or interruption of operations.
+
+    DISCLAIMER OF LIABILITY
+    NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+    DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+    DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+    ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+    TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+    USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+    HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#ifndef SCSIHOST_H_INCLUDED
+#define SCSIHOST_H_INCLUDED
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ *     SCSI Public stuff...
+ */
+
+#define MPT_SCANDV_GOOD                        (0x00000000) /* must be 0 */
+#define MPT_SCANDV_DID_RESET           (0x00000001)
+#define MPT_SCANDV_SENSE               (0x00000002)
+#define MPT_SCANDV_SOME_ERROR          (0x00000004)
+#define MPT_SCANDV_SELECTION_TIMEOUT   (0x00000008)
+#define MPT_SCANDV_ISSUE_SENSE         (0x00000010)
+#define MPT_SCANDV_FALLBACK            (0x00000020)
+#define MPT_SCANDV_BUSY                        (0x00000040)
+
+#define MPT_SCANDV_MAX_RETRIES         (10)
+
+#define MPT_ICFLAG_BUF_CAP     0x01    /* ReadBuffer Read Capacity format */
+#define MPT_ICFLAG_ECHO                0x02    /* ReadBuffer Echo buffer format */
+#define MPT_ICFLAG_EBOS                0x04    /* ReadBuffer Echo buffer has EBOS */
+#define MPT_ICFLAG_PHYS_DISK   0x08    /* Any SCSI IO but do Phys Disk Format */
+#define MPT_ICFLAG_TAGGED_CMD  0x10    /* Do tagged IO */
+#define MPT_ICFLAG_DID_RESET   0x20    /* Bus Reset occurred with this command */
+#define MPT_ICFLAG_RESERVED    0x40    /* Reserved has been issued */
+
+#define MPT_SCSI_CMD_PER_DEV_HIGH      64
+#define MPT_SCSI_CMD_PER_DEV_LOW       32
+
+#define MPT_SCSI_CMD_PER_LUN           7
+
+#define MPT_SCSI_MAX_SECTORS    8192
+
+/* SCSI driver setup structure. Settings can be overridden
+ * by command line options.
+ */
+#define MPTSCSIH_DOMAIN_VALIDATION      1
+#define MPTSCSIH_MAX_WIDTH              1
+#define MPTSCSIH_MIN_SYNC               0x08
+#define MPTSCSIH_SAF_TE                 0
+#define MPTSCSIH_PT_CLEAR               0
+
+#endif
+
+
+typedef struct _internal_cmd {
+       char            *data;          /* data pointer */
+       dma_addr_t      data_dma;       /* data dma address */
+       int             size;           /* transfer size */
+       u8              cmd;            /* SCSI Op Code */
+       u8              channel;        /* bus number */
+       u8              id;             /* SCSI ID (virtual) */
+       u64             lun;
+       u8              flags;          /* Bit Field - See above */
+       u8              physDiskNum;    /* Phys disk number, -1 else */
+       u8              rsvd2;
+       u8              rsvd;
+} INTERNAL_CMD;
+
+extern void mptscsih_remove(struct pci_dev *);
+extern void mptscsih_shutdown(struct pci_dev *);
+#ifdef CONFIG_PM
+extern int mptscsih_suspend(struct pci_dev *pdev, pm_message_t state);
+extern int mptscsih_resume(struct pci_dev *pdev);
+#endif
+extern int mptscsih_show_info(struct seq_file *, struct Scsi_Host *);
+extern const char * mptscsih_info(struct Scsi_Host *SChost);
+extern int mptscsih_qcmd(struct scsi_cmnd *SCpnt);
+extern int mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel,
+       u8 id, u64 lun, int ctx2abort, ulong timeout);
+extern void mptscsih_slave_destroy(struct scsi_device *device);
+extern int mptscsih_slave_configure(struct scsi_device *device);
+extern int mptscsih_abort(struct scsi_cmnd * SCpnt);
+extern int mptscsih_dev_reset(struct scsi_cmnd * SCpnt);
+extern int mptscsih_bus_reset(struct scsi_cmnd * SCpnt);
+extern int mptscsih_host_reset(struct scsi_cmnd *SCpnt);
+extern int mptscsih_bios_param(struct scsi_device * sdev, struct block_device *bdev, sector_t capacity, int geom[]);
+extern int mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
+extern int mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
+extern int mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
+extern int mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply);
+extern int mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset);
+extern int mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth);
+extern u8 mptscsih_raid_id_to_num(MPT_ADAPTER *ioc, u8 channel, u8 id);
+extern int mptscsih_is_phys_disk(MPT_ADAPTER *ioc, u8 channel, u8 id);
+extern struct device_attribute *mptscsih_host_attrs[];
+extern struct scsi_cmnd        *mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i);
+extern void mptscsih_taskmgmt_response_code(MPT_ADAPTER *ioc, u8 response_code);
+extern void mptscsih_flush_running_cmds(MPT_SCSI_HOST *hd);