--- /dev/null
+/*
+ * tm6000-cards.c - driver for TM5600/TM6000/TM6010 USB video capture devices
+ *
+ * Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/usb.h>
+#include <linux/slab.h>
+#include <media/v4l2-common.h>
+#include <media/tuner.h>
+#include <media/tvaudio.h>
+#include <media/i2c-addr.h>
+#include <media/rc-map.h>
+
+#include "tm6000.h"
+#include "tm6000-regs.h"
+#include "tuner-xc2028.h"
+#include "xc5000.h"
+
+#define TM6000_BOARD_UNKNOWN 0
+#define TM5600_BOARD_GENERIC 1
+#define TM6000_BOARD_GENERIC 2
+#define TM6010_BOARD_GENERIC 3
+#define TM5600_BOARD_10MOONS_UT821 4
+#define TM5600_BOARD_10MOONS_UT330 5
+#define TM6000_BOARD_ADSTECH_DUAL_TV 6
+#define TM6000_BOARD_FREECOM_AND_SIMILAR 7
+#define TM6000_BOARD_ADSTECH_MINI_DUAL_TV 8
+#define TM6010_BOARD_HAUPPAUGE_900H 9
+#define TM6010_BOARD_BEHOLD_WANDER 10
+#define TM6010_BOARD_BEHOLD_VOYAGER 11
+#define TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE 12
+#define TM6010_BOARD_TWINHAN_TU501 13
+#define TM6010_BOARD_BEHOLD_WANDER_LITE 14
+#define TM6010_BOARD_BEHOLD_VOYAGER_LITE 15
+#define TM5600_BOARD_TERRATEC_GRABSTER 16
+
+#define is_generic(model) ((model == TM6000_BOARD_UNKNOWN) || \
+ (model == TM5600_BOARD_GENERIC) || \
+ (model == TM6000_BOARD_GENERIC) || \
+ (model == TM6010_BOARD_GENERIC))
+
+#define TM6000_MAXBOARDS 16
+static unsigned int card[] = {[0 ... (TM6000_MAXBOARDS - 1)] = UNSET };
+
+module_param_array(card, int, NULL, 0444);
+
+static unsigned long tm6000_devused;
+
+
+struct tm6000_board {
+ char *name;
+ char eename[16]; /* EEPROM name */
+ unsigned eename_size; /* size of EEPROM name */
+ unsigned eename_pos; /* Position where it appears at ROM */
+
+ struct tm6000_capabilities caps;
+
+ enum tm6000_devtype type; /* variant of the chipset */
+ int tuner_type; /* type of the tuner */
+ int tuner_addr; /* tuner address */
+ int demod_addr; /* demodulator address */
+
+ struct tm6000_gpio gpio;
+
+ struct tm6000_input vinput[3];
+ struct tm6000_input rinput;
+
+ char *ir_codes;
+};
+
+static struct tm6000_board tm6000_boards[] = {
+ [TM6000_BOARD_UNKNOWN] = {
+ .name = "Unknown tm6000 video grabber",
+ .caps = {
+ .has_tuner = 1,
+ .has_eeprom = 1,
+ },
+ .gpio = {
+ .tuner_reset = TM6000_GPIO_1,
+ },
+ .vinput = { {
+ .type = TM6000_INPUT_TV,
+ .vmux = TM6000_VMUX_VIDEO_B,
+ .amux = TM6000_AMUX_ADC1,
+ }, {
+ .type = TM6000_INPUT_COMPOSITE1,
+ .vmux = TM6000_VMUX_VIDEO_A,
+ .amux = TM6000_AMUX_ADC2,
+ }, {
+ .type = TM6000_INPUT_SVIDEO,
+ .vmux = TM6000_VMUX_VIDEO_AB,
+ .amux = TM6000_AMUX_ADC2,
+ },
+ },
+ },
+ [TM5600_BOARD_GENERIC] = {
+ .name = "Generic tm5600 board",
+ .type = TM5600,
+ .tuner_type = TUNER_XC2028,
+ .tuner_addr = 0xc2 >> 1,
+ .caps = {
+ .has_tuner = 1,
+ .has_eeprom = 1,
+ },
+ .gpio = {
+ .tuner_reset = TM6000_GPIO_1,
+ },
+ .vinput = { {
+ .type = TM6000_INPUT_TV,
+ .vmux = TM6000_VMUX_VIDEO_B,
+ .amux = TM6000_AMUX_ADC1,
+ }, {
+ .type = TM6000_INPUT_COMPOSITE1,
+ .vmux = TM6000_VMUX_VIDEO_A,
+ .amux = TM6000_AMUX_ADC2,
+ }, {
+ .type = TM6000_INPUT_SVIDEO,
+ .vmux = TM6000_VMUX_VIDEO_AB,
+ .amux = TM6000_AMUX_ADC2,
+ },
+ },
+ },
+ [TM6000_BOARD_GENERIC] = {
+ .name = "Generic tm6000 board",
+ .tuner_type = TUNER_XC2028,
+ .tuner_addr = 0xc2 >> 1,
+ .caps = {
+ .has_tuner = 1,
+ .has_eeprom = 1,
+ },
+ .gpio = {
+ .tuner_reset = TM6000_GPIO_1,
+ },
+ .vinput = { {
+ .type = TM6000_INPUT_TV,
+ .vmux = TM6000_VMUX_VIDEO_B,
+ .amux = TM6000_AMUX_ADC1,
+ }, {
+ .type = TM6000_INPUT_COMPOSITE1,
+ .vmux = TM6000_VMUX_VIDEO_A,
+ .amux = TM6000_AMUX_ADC2,
+ }, {
+ .type = TM6000_INPUT_SVIDEO,
+ .vmux = TM6000_VMUX_VIDEO_AB,
+ .amux = TM6000_AMUX_ADC2,
+ },
+ },
+ },
+ [TM6010_BOARD_GENERIC] = {
+ .name = "Generic tm6010 board",
+ .type = TM6010,
+ .tuner_type = TUNER_XC2028,
+ .tuner_addr = 0xc2 >> 1,
+ .demod_addr = 0x1e >> 1,
+ .caps = {
+ .has_tuner = 1,
+ .has_dvb = 1,
+ .has_zl10353 = 1,
+ .has_eeprom = 1,
+ .has_remote = 1,
+ },
+ .gpio = {
+ .tuner_reset = TM6010_GPIO_2,
+ .tuner_on = TM6010_GPIO_3,
+ .demod_reset = TM6010_GPIO_1,
+ .demod_on = TM6010_GPIO_4,
+ .power_led = TM6010_GPIO_7,
+ .dvb_led = TM6010_GPIO_5,
+ .ir = TM6010_GPIO_0,
+ },
+ .vinput = { {
+ .type = TM6000_INPUT_TV,
+ .vmux = TM6000_VMUX_VIDEO_B,
+ .amux = TM6000_AMUX_SIF1,
+ }, {
+ .type = TM6000_INPUT_COMPOSITE1,
+ .vmux = TM6000_VMUX_VIDEO_A,
+ .amux = TM6000_AMUX_ADC2,
+ }, {
+ .type = TM6000_INPUT_SVIDEO,
+ .vmux = TM6000_VMUX_VIDEO_AB,
+ .amux = TM6000_AMUX_ADC2,
+ },
+ },
+ },
+ [TM5600_BOARD_10MOONS_UT821] = {
+ .name = "10Moons UT 821",
+ .tuner_type = TUNER_XC2028,
+ .eename = { '1', '0', 'M', 'O', 'O', 'N', 'S', '5', '6', '0', '0', 0xff, 0x45, 0x5b},
+ .eename_size = 14,
+ .eename_pos = 0x14,
+ .type = TM5600,
+ .tuner_addr = 0xc2 >> 1,
+ .caps = {
+ .has_tuner = 1,
+ .has_eeprom = 1,
+ },
+ .gpio = {
+ .tuner_reset = TM6000_GPIO_1,
+ },
+ .vinput = { {
+ .type = TM6000_INPUT_TV,
+ .vmux = TM6000_VMUX_VIDEO_B,
+ .amux = TM6000_AMUX_ADC1,
+ }, {
+ .type = TM6000_INPUT_COMPOSITE1,
+ .vmux = TM6000_VMUX_VIDEO_A,
+ .amux = TM6000_AMUX_ADC2,
+ }, {
+ .type = TM6000_INPUT_SVIDEO,
+ .vmux = TM6000_VMUX_VIDEO_AB,
+ .amux = TM6000_AMUX_ADC2,
+ },
+ },
+ },
+ [TM5600_BOARD_10MOONS_UT330] = {
+ .name = "10Moons UT 330",
+ .tuner_type = TUNER_PHILIPS_FQ1216AME_MK4,
+ .tuner_addr = 0xc8 >> 1,
+ .caps = {
+ .has_tuner = 1,
+ .has_dvb = 0,
+ .has_zl10353 = 0,
+ .has_eeprom = 1,
+ },
+ .vinput = { {
+ .type = TM6000_INPUT_TV,
+ .vmux = TM6000_VMUX_VIDEO_B,
+ .amux = TM6000_AMUX_ADC1,
+ }, {
+ .type = TM6000_INPUT_COMPOSITE1,
+ .vmux = TM6000_VMUX_VIDEO_A,
+ .amux = TM6000_AMUX_ADC2,
+ }, {
+ .type = TM6000_INPUT_SVIDEO,
+ .vmux = TM6000_VMUX_VIDEO_AB,
+ .amux = TM6000_AMUX_ADC2,
+ },
+ },
+ },
+ [TM6000_BOARD_ADSTECH_DUAL_TV] = {
+ .name = "ADSTECH Dual TV USB",
+ .tuner_type = TUNER_XC2028,
+ .tuner_addr = 0xc8 >> 1,
+ .caps = {
+ .has_tuner = 1,
+ .has_tda9874 = 1,
+ .has_dvb = 1,
+ .has_zl10353 = 1,
+ .has_eeprom = 1,
+ },
+ .vinput = { {
+ .type = TM6000_INPUT_TV,
+ .vmux = TM6000_VMUX_VIDEO_B,
+ .amux = TM6000_AMUX_ADC1,
+ }, {
+ .type = TM6000_INPUT_COMPOSITE1,
+ .vmux = TM6000_VMUX_VIDEO_A,
+ .amux = TM6000_AMUX_ADC2,
+ }, {
+ .type = TM6000_INPUT_SVIDEO,
+ .vmux = TM6000_VMUX_VIDEO_AB,
+ .amux = TM6000_AMUX_ADC2,
+ },
+ },
+ },
+ [TM6000_BOARD_FREECOM_AND_SIMILAR] = {
+ .name = "Freecom Hybrid Stick / Moka DVB-T Receiver Dual",
+ .tuner_type = TUNER_XC2028, /* has a XC3028 */
+ .tuner_addr = 0xc2 >> 1,
+ .demod_addr = 0x1e >> 1,
+ .caps = {
+ .has_tuner = 1,
+ .has_dvb = 1,
+ .has_zl10353 = 1,
+ .has_eeprom = 0,
+ .has_remote = 1,
+ },
+ .gpio = {
+ .tuner_reset = TM6000_GPIO_4,
+ },
+ .vinput = { {
+ .type = TM6000_INPUT_TV,
+ .vmux = TM6000_VMUX_VIDEO_B,
+ .amux = TM6000_AMUX_ADC1,
+ }, {
+ .type = TM6000_INPUT_COMPOSITE1,
+ .vmux = TM6000_VMUX_VIDEO_A,
+ .amux = TM6000_AMUX_ADC2,
+ }, {
+ .type = TM6000_INPUT_SVIDEO,
+ .vmux = TM6000_VMUX_VIDEO_AB,
+ .amux = TM6000_AMUX_ADC2,
+ },
+ },
+ },
+ [TM6000_BOARD_ADSTECH_MINI_DUAL_TV] = {
+ .name = "ADSTECH Mini Dual TV USB",
+ .tuner_type = TUNER_XC2028, /* has a XC3028 */
+ .tuner_addr = 0xc8 >> 1,
+ .demod_addr = 0x1e >> 1,
+ .caps = {
+ .has_tuner = 1,
+ .has_dvb = 1,
+ .has_zl10353 = 1,
+ .has_eeprom = 0,
+ },
+ .gpio = {
+ .tuner_reset = TM6000_GPIO_4,
+ },
+ .vinput = { {
+ .type = TM6000_INPUT_TV,
+ .vmux = TM6000_VMUX_VIDEO_B,
+ .amux = TM6000_AMUX_ADC1,
+ }, {
+ .type = TM6000_INPUT_COMPOSITE1,
+ .vmux = TM6000_VMUX_VIDEO_A,
+ .amux = TM6000_AMUX_ADC2,
+ }, {
+ .type = TM6000_INPUT_SVIDEO,
+ .vmux = TM6000_VMUX_VIDEO_AB,
+ .amux = TM6000_AMUX_ADC2,
+ },
+ },
+ },
+ [TM6010_BOARD_HAUPPAUGE_900H] = {
+ .name = "Hauppauge WinTV HVR-900H / WinTV USB2-Stick",
+ .eename = { 'H', 0, 'V', 0, 'R', 0, '9', 0, '0', 0, '0', 0, 'H', 0 },
+ .eename_size = 14,
+ .eename_pos = 0x42,
+ .tuner_type = TUNER_XC2028, /* has a XC3028 */
+ .tuner_addr = 0xc2 >> 1,
+ .demod_addr = 0x1e >> 1,
+ .type = TM6010,
+ .ir_codes = RC_MAP_HAUPPAUGE,
+ .caps = {
+ .has_tuner = 1,
+ .has_dvb = 1,
+ .has_zl10353 = 1,
+ .has_eeprom = 1,
+ .has_remote = 1,
+ },
+ .gpio = {
+ .tuner_reset = TM6010_GPIO_2,
+ .tuner_on = TM6010_GPIO_3,
+ .demod_reset = TM6010_GPIO_1,
+ .demod_on = TM6010_GPIO_4,
+ .power_led = TM6010_GPIO_7,
+ .dvb_led = TM6010_GPIO_5,
+ .ir = TM6010_GPIO_0,
+ },
+ .vinput = { {
+ .type = TM6000_INPUT_TV,
+ .vmux = TM6000_VMUX_VIDEO_B,
+ .amux = TM6000_AMUX_SIF1,
+ }, {
+ .type = TM6000_INPUT_COMPOSITE1,
+ .vmux = TM6000_VMUX_VIDEO_A,
+ .amux = TM6000_AMUX_ADC2,
+ }, {
+ .type = TM6000_INPUT_SVIDEO,
+ .vmux = TM6000_VMUX_VIDEO_AB,
+ .amux = TM6000_AMUX_ADC2,
+ },
+ },
+ },
+ [TM6010_BOARD_BEHOLD_WANDER] = {
+ .name = "Beholder Wander DVB-T/TV/FM USB2.0",
+ .tuner_type = TUNER_XC5000,
+ .tuner_addr = 0xc2 >> 1,
+ .demod_addr = 0x1e >> 1,
+ .type = TM6010,
+ .caps = {
+ .has_tuner = 1,
+ .has_dvb = 1,
+ .has_zl10353 = 1,
+ .has_eeprom = 1,
+ .has_remote = 1,
+ .has_radio = 1,
+ },
+ .gpio = {
+ .tuner_reset = TM6010_GPIO_0,
+ .demod_reset = TM6010_GPIO_1,
+ .power_led = TM6010_GPIO_6,
+ },
+ .vinput = { {
+ .type = TM6000_INPUT_TV,
+ .vmux = TM6000_VMUX_VIDEO_B,
+ .amux = TM6000_AMUX_SIF1,
+ }, {
+ .type = TM6000_INPUT_COMPOSITE1,
+ .vmux = TM6000_VMUX_VIDEO_A,
+ .amux = TM6000_AMUX_ADC2,
+ }, {
+ .type = TM6000_INPUT_SVIDEO,
+ .vmux = TM6000_VMUX_VIDEO_AB,
+ .amux = TM6000_AMUX_ADC2,
+ },
+ },
+ .rinput = {
+ .type = TM6000_INPUT_RADIO,
+ .amux = TM6000_AMUX_ADC1,
+ },
+ },
+ [TM6010_BOARD_BEHOLD_VOYAGER] = {
+ .name = "Beholder Voyager TV/FM USB2.0",
+ .tuner_type = TUNER_XC5000,
+ .tuner_addr = 0xc2 >> 1,
+ .type = TM6010,
+ .caps = {
+ .has_tuner = 1,
+ .has_dvb = 0,
+ .has_zl10353 = 0,
+ .has_eeprom = 1,
+ .has_remote = 1,
+ .has_radio = 1,
+ },
+ .gpio = {
+ .tuner_reset = TM6010_GPIO_0,
+ .power_led = TM6010_GPIO_6,
+ },
+ .vinput = { {
+ .type = TM6000_INPUT_TV,
+ .vmux = TM6000_VMUX_VIDEO_B,
+ .amux = TM6000_AMUX_SIF1,
+ }, {
+ .type = TM6000_INPUT_COMPOSITE1,
+ .vmux = TM6000_VMUX_VIDEO_A,
+ .amux = TM6000_AMUX_ADC2,
+ }, {
+ .type = TM6000_INPUT_SVIDEO,
+ .vmux = TM6000_VMUX_VIDEO_AB,
+ .amux = TM6000_AMUX_ADC2,
+ },
+ },
+ .rinput = {
+ .type = TM6000_INPUT_RADIO,
+ .amux = TM6000_AMUX_ADC1,
+ },
+ },
+ [TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE] = {
+ .name = "Terratec Cinergy Hybrid XE / Cinergy Hybrid-Stick",
+ .tuner_type = TUNER_XC2028, /* has a XC3028 */
+ .tuner_addr = 0xc2 >> 1,
+ .demod_addr = 0x1e >> 1,
+ .type = TM6010,
+ .caps = {
+ .has_tuner = 1,
+ .has_dvb = 1,
+ .has_zl10353 = 1,
+ .has_eeprom = 1,
+ .has_remote = 1,
+ .has_radio = 1,
+ },
+ .gpio = {
+ .tuner_reset = TM6010_GPIO_2,
+ .tuner_on = TM6010_GPIO_3,
+ .demod_reset = TM6010_GPIO_1,
+ .demod_on = TM6010_GPIO_4,
+ .power_led = TM6010_GPIO_7,
+ .dvb_led = TM6010_GPIO_5,
+ .ir = TM6010_GPIO_0,
+ },
+ .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
+ .vinput = { {
+ .type = TM6000_INPUT_TV,
+ .vmux = TM6000_VMUX_VIDEO_B,
+ .amux = TM6000_AMUX_SIF1,
+ }, {
+ .type = TM6000_INPUT_COMPOSITE1,
+ .vmux = TM6000_VMUX_VIDEO_A,
+ .amux = TM6000_AMUX_ADC2,
+ }, {
+ .type = TM6000_INPUT_SVIDEO,
+ .vmux = TM6000_VMUX_VIDEO_AB,
+ .amux = TM6000_AMUX_ADC2,
+ },
+ },
+ .rinput = {
+ .type = TM6000_INPUT_RADIO,
+ .amux = TM6000_AMUX_SIF1,
+ },
+ },
+ [TM5600_BOARD_TERRATEC_GRABSTER] = {
+ .name = "Terratec Grabster AV 150/250 MX",
+ .type = TM5600,
+ .tuner_type = TUNER_ABSENT,
+ .vinput = { {
+ .type = TM6000_INPUT_TV,
+ .vmux = TM6000_VMUX_VIDEO_B,
+ .amux = TM6000_AMUX_ADC1,
+ }, {
+ .type = TM6000_INPUT_COMPOSITE1,
+ .vmux = TM6000_VMUX_VIDEO_A,
+ .amux = TM6000_AMUX_ADC2,
+ }, {
+ .type = TM6000_INPUT_SVIDEO,
+ .vmux = TM6000_VMUX_VIDEO_AB,
+ .amux = TM6000_AMUX_ADC2,
+ },
+ },
+ },
+ [TM6010_BOARD_TWINHAN_TU501] = {
+ .name = "Twinhan TU501(704D1)",
+ .tuner_type = TUNER_XC2028, /* has a XC3028 */
+ .tuner_addr = 0xc2 >> 1,
+ .demod_addr = 0x1e >> 1,
+ .type = TM6010,
+ .caps = {
+ .has_tuner = 1,
+ .has_dvb = 1,
+ .has_zl10353 = 1,
+ .has_eeprom = 1,
+ .has_remote = 1,
+ },
+ .gpio = {
+ .tuner_reset = TM6010_GPIO_2,
+ .tuner_on = TM6010_GPIO_3,
+ .demod_reset = TM6010_GPIO_1,
+ .demod_on = TM6010_GPIO_4,
+ .power_led = TM6010_GPIO_7,
+ .dvb_led = TM6010_GPIO_5,
+ .ir = TM6010_GPIO_0,
+ },
+ .vinput = { {
+ .type = TM6000_INPUT_TV,
+ .vmux = TM6000_VMUX_VIDEO_B,
+ .amux = TM6000_AMUX_SIF1,
+ }, {
+ .type = TM6000_INPUT_COMPOSITE1,
+ .vmux = TM6000_VMUX_VIDEO_A,
+ .amux = TM6000_AMUX_ADC2,
+ }, {
+ .type = TM6000_INPUT_SVIDEO,
+ .vmux = TM6000_VMUX_VIDEO_AB,
+ .amux = TM6000_AMUX_ADC2,
+ },
+ },
+ },
+ [TM6010_BOARD_BEHOLD_WANDER_LITE] = {
+ .name = "Beholder Wander Lite DVB-T/TV/FM USB2.0",
+ .tuner_type = TUNER_XC5000,
+ .tuner_addr = 0xc2 >> 1,
+ .demod_addr = 0x1e >> 1,
+ .type = TM6010,
+ .caps = {
+ .has_tuner = 1,
+ .has_dvb = 1,
+ .has_zl10353 = 1,
+ .has_eeprom = 1,
+ .has_remote = 0,
+ .has_radio = 1,
+ },
+ .gpio = {
+ .tuner_reset = TM6010_GPIO_0,
+ .demod_reset = TM6010_GPIO_1,
+ .power_led = TM6010_GPIO_6,
+ },
+ .vinput = { {
+ .type = TM6000_INPUT_TV,
+ .vmux = TM6000_VMUX_VIDEO_B,
+ .amux = TM6000_AMUX_SIF1,
+ },
+ },
+ .rinput = {
+ .type = TM6000_INPUT_RADIO,
+ .amux = TM6000_AMUX_ADC1,
+ },
+ },
+ [TM6010_BOARD_BEHOLD_VOYAGER_LITE] = {
+ .name = "Beholder Voyager Lite TV/FM USB2.0",
+ .tuner_type = TUNER_XC5000,
+ .tuner_addr = 0xc2 >> 1,
+ .type = TM6010,
+ .caps = {
+ .has_tuner = 1,
+ .has_dvb = 0,
+ .has_zl10353 = 0,
+ .has_eeprom = 1,
+ .has_remote = 0,
+ .has_radio = 1,
+ },
+ .gpio = {
+ .tuner_reset = TM6010_GPIO_0,
+ .power_led = TM6010_GPIO_6,
+ },
+ .vinput = { {
+ .type = TM6000_INPUT_TV,
+ .vmux = TM6000_VMUX_VIDEO_B,
+ .amux = TM6000_AMUX_SIF1,
+ },
+ },
+ .rinput = {
+ .type = TM6000_INPUT_RADIO,
+ .amux = TM6000_AMUX_ADC1,
+ },
+ },
+};
+
+/* table of devices that work with this driver */
+static struct usb_device_id tm6000_id_table[] = {
+ { USB_DEVICE(0x6000, 0x0001), .driver_info = TM5600_BOARD_GENERIC },
+ { USB_DEVICE(0x6000, 0x0002), .driver_info = TM6010_BOARD_GENERIC },
+ { USB_DEVICE(0x06e1, 0xf332), .driver_info = TM6000_BOARD_ADSTECH_DUAL_TV },
+ { USB_DEVICE(0x14aa, 0x0620), .driver_info = TM6000_BOARD_FREECOM_AND_SIMILAR },
+ { USB_DEVICE(0x06e1, 0xb339), .driver_info = TM6000_BOARD_ADSTECH_MINI_DUAL_TV },
+ { USB_DEVICE(0x2040, 0x6600), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
+ { USB_DEVICE(0x2040, 0x6601), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
+ { USB_DEVICE(0x2040, 0x6610), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
+ { USB_DEVICE(0x2040, 0x6611), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
+ { USB_DEVICE(0x6000, 0xdec0), .driver_info = TM6010_BOARD_BEHOLD_WANDER },
+ { USB_DEVICE(0x6000, 0xdec1), .driver_info = TM6010_BOARD_BEHOLD_VOYAGER },
+ { USB_DEVICE(0x0ccd, 0x0086), .driver_info = TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE },
+ { USB_DEVICE(0x0ccd, 0x00A5), .driver_info = TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE },
+ { USB_DEVICE(0x0ccd, 0x0079), .driver_info = TM5600_BOARD_TERRATEC_GRABSTER },
+ { USB_DEVICE(0x13d3, 0x3240), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
+ { USB_DEVICE(0x13d3, 0x3241), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
+ { USB_DEVICE(0x13d3, 0x3243), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
+ { USB_DEVICE(0x13d3, 0x3264), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
+ { USB_DEVICE(0x6000, 0xdec2), .driver_info = TM6010_BOARD_BEHOLD_WANDER_LITE },
+ { USB_DEVICE(0x6000, 0xdec3), .driver_info = TM6010_BOARD_BEHOLD_VOYAGER_LITE },
+ { }
+};
+MODULE_DEVICE_TABLE(usb, tm6000_id_table);
+
+/* Control power led for show some activity */
+void tm6000_flash_led(struct tm6000_core *dev, u8 state)
+{
+ /* Power LED unconfigured */
+ if (!dev->gpio.power_led)
+ return;
+
+ /* ON Power LED */
+ if (state) {
+ switch (dev->model) {
+ case TM6010_BOARD_HAUPPAUGE_900H:
+ case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+ case TM6010_BOARD_TWINHAN_TU501:
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.power_led, 0x00);
+ break;
+ case TM6010_BOARD_BEHOLD_WANDER:
+ case TM6010_BOARD_BEHOLD_VOYAGER:
+ case TM6010_BOARD_BEHOLD_WANDER_LITE:
+ case TM6010_BOARD_BEHOLD_VOYAGER_LITE:
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.power_led, 0x01);
+ break;
+ }
+ }
+ /* OFF Power LED */
+ else {
+ switch (dev->model) {
+ case TM6010_BOARD_HAUPPAUGE_900H:
+ case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+ case TM6010_BOARD_TWINHAN_TU501:
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.power_led, 0x01);
+ break;
+ case TM6010_BOARD_BEHOLD_WANDER:
+ case TM6010_BOARD_BEHOLD_VOYAGER:
+ case TM6010_BOARD_BEHOLD_WANDER_LITE:
+ case TM6010_BOARD_BEHOLD_VOYAGER_LITE:
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.power_led, 0x00);
+ break;
+ }
+ }
+}
+
+/* Tuner callback to provide the proper gpio changes needed for xc5000 */
+int tm6000_xc5000_callback(void *ptr, int component, int command, int arg)
+{
+ int rc = 0;
+ struct tm6000_core *dev = ptr;
+
+ if (dev->tuner_type != TUNER_XC5000)
+ return 0;
+
+ switch (command) {
+ case XC5000_TUNER_RESET:
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.tuner_reset, 0x01);
+ msleep(15);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.tuner_reset, 0x00);
+ msleep(15);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.tuner_reset, 0x01);
+ break;
+ }
+ return rc;
+}
+EXPORT_SYMBOL_GPL(tm6000_xc5000_callback);
+
+/* Tuner callback to provide the proper gpio changes needed for xc2028 */
+
+int tm6000_tuner_callback(void *ptr, int component, int command, int arg)
+{
+ int rc = 0;
+ struct tm6000_core *dev = ptr;
+
+ if (dev->tuner_type != TUNER_XC2028)
+ return 0;
+
+ switch (command) {
+ case XC2028_RESET_CLK:
+ tm6000_ir_wait(dev, 0);
+
+ tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT,
+ 0x02, arg);
+ msleep(10);
+ rc = tm6000_i2c_reset(dev, 10);
+ break;
+ case XC2028_TUNER_RESET:
+ /* Reset codes during load firmware */
+ switch (arg) {
+ case 0:
+ /* newer tuner can faster reset */
+ switch (dev->model) {
+ case TM5600_BOARD_10MOONS_UT821:
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.tuner_reset, 0x01);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ 0x300, 0x01);
+ msleep(10);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.tuner_reset, 0x00);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ 0x300, 0x00);
+ msleep(10);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.tuner_reset, 0x01);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ 0x300, 0x01);
+ break;
+ case TM6010_BOARD_HAUPPAUGE_900H:
+ case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+ case TM6010_BOARD_TWINHAN_TU501:
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.tuner_reset, 0x01);
+ msleep(60);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.tuner_reset, 0x00);
+ msleep(75);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.tuner_reset, 0x01);
+ msleep(60);
+ break;
+ default:
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.tuner_reset, 0x00);
+ msleep(130);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.tuner_reset, 0x01);
+ msleep(130);
+ break;
+ }
+
+ tm6000_ir_wait(dev, 1);
+ break;
+ case 1:
+ tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT,
+ 0x02, 0x01);
+ msleep(10);
+ break;
+ case 2:
+ rc = tm6000_i2c_reset(dev, 100);
+ break;
+ }
+ break;
+ case XC2028_I2C_FLUSH:
+ tm6000_set_reg(dev, REQ_50_SET_START, 0, 0);
+ tm6000_set_reg(dev, REQ_51_SET_STOP, 0, 0);
+ break;
+ }
+ return rc;
+}
+EXPORT_SYMBOL_GPL(tm6000_tuner_callback);
+
+int tm6000_cards_setup(struct tm6000_core *dev)
+{
+ /*
+ * Board-specific initialization sequence. Handles all GPIO
+ * initialization sequences that are board-specific.
+ * Up to now, all found devices use GPIO1 and GPIO4 at the same way.
+ * Probably, they're all based on some reference device. Due to that,
+ * there's a common routine at the end to handle those GPIO's. Devices
+ * that use different pinups or init sequences can just return at
+ * the board-specific session.
+ */
+ switch (dev->model) {
+ case TM6010_BOARD_HAUPPAUGE_900H:
+ case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+ case TM6010_BOARD_TWINHAN_TU501:
+ case TM6010_BOARD_GENERIC:
+ /* Turn xceive 3028 on */
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.tuner_on, 0x01);
+ msleep(15);
+ /* Turn zarlink zl10353 on */
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x00);
+ msleep(15);
+ /* Reset zarlink zl10353 */
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x00);
+ msleep(50);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x01);
+ msleep(15);
+ /* Turn zarlink zl10353 off */
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x01);
+ msleep(15);
+ /* ir ? */
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.ir, 0x01);
+ msleep(15);
+ /* Power led on (blue) */
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x00);
+ msleep(15);
+ /* DVB led off (orange) */
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.dvb_led, 0x01);
+ msleep(15);
+ /* Turn zarlink zl10353 on */
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x00);
+ msleep(15);
+ break;
+ case TM6010_BOARD_BEHOLD_WANDER:
+ case TM6010_BOARD_BEHOLD_WANDER_LITE:
+ /* Power led on (blue) */
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x01);
+ msleep(15);
+ /* Reset zarlink zl10353 */
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x00);
+ msleep(50);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x01);
+ msleep(15);
+ break;
+ case TM6010_BOARD_BEHOLD_VOYAGER:
+ case TM6010_BOARD_BEHOLD_VOYAGER_LITE:
+ /* Power led on (blue) */
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x01);
+ msleep(15);
+ break;
+ default:
+ break;
+ }
+
+ /*
+ * Default initialization. Most of the devices seem to use GPIO1
+ * and GPIO4.on the same way, so, this handles the common sequence
+ * used by most devices.
+ * If a device uses a different sequence or different GPIO pins for
+ * reset, just add the code at the board-specific part
+ */
+
+ if (dev->gpio.tuner_reset) {
+ int rc;
+ int i;
+
+ for (i = 0; i < 2; i++) {
+ rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.tuner_reset, 0x00);
+ if (rc < 0) {
+ printk(KERN_ERR "Error %i doing tuner reset\n", rc);
+ return rc;
+ }
+
+ msleep(10); /* Just to be conservative */
+ rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.tuner_reset, 0x01);
+ if (rc < 0) {
+ printk(KERN_ERR "Error %i doing tuner reset\n", rc);
+ return rc;
+ }
+ }
+ } else {
+ printk(KERN_ERR "Tuner reset is not configured\n");
+ return -1;
+ }
+
+ msleep(50);
+
+ return 0;
+};
+
+static void tm6000_config_tuner(struct tm6000_core *dev)
+{
+ struct tuner_setup tun_setup;
+
+ /* Load tuner module */
+ v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+ "tuner", dev->tuner_addr, NULL);
+
+ memset(&tun_setup, 0, sizeof(tun_setup));
+ tun_setup.type = dev->tuner_type;
+ tun_setup.addr = dev->tuner_addr;
+
+ tun_setup.mode_mask = 0;
+ if (dev->caps.has_tuner)
+ tun_setup.mode_mask |= (T_ANALOG_TV | T_RADIO);
+
+ switch (dev->tuner_type) {
+ case TUNER_XC2028:
+ tun_setup.tuner_callback = tm6000_tuner_callback;
+ break;
+ case TUNER_XC5000:
+ tun_setup.tuner_callback = tm6000_xc5000_callback;
+ break;
+ }
+
+ v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
+
+ switch (dev->tuner_type) {
+ case TUNER_XC2028: {
+ struct v4l2_priv_tun_config xc2028_cfg;
+ struct xc2028_ctrl ctl;
+
+ memset(&xc2028_cfg, 0, sizeof(xc2028_cfg));
+ memset(&ctl, 0, sizeof(ctl));
+
+ ctl.demod = XC3028_FE_ZARLINK456;
+
+ xc2028_cfg.tuner = TUNER_XC2028;
+ xc2028_cfg.priv = &ctl;
+
+ switch (dev->model) {
+ case TM6010_BOARD_HAUPPAUGE_900H:
+ case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+ case TM6010_BOARD_TWINHAN_TU501:
+ ctl.max_len = 80;
+ ctl.fname = "xc3028L-v36.fw";
+ break;
+ default:
+ if (dev->dev_type == TM6010)
+ ctl.fname = "xc3028-v27.fw";
+ else
+ ctl.fname = "xc3028-v24.fw";
+ }
+
+ printk(KERN_INFO "Setting firmware parameters for xc2028\n");
+ v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config,
+ &xc2028_cfg);
+
+ }
+ break;
+ case TUNER_XC5000:
+ {
+ struct v4l2_priv_tun_config xc5000_cfg;
+ struct xc5000_config ctl = {
+ .i2c_address = dev->tuner_addr,
+ .if_khz = 4570,
+ .radio_input = XC5000_RADIO_FM1_MONO,
+ };
+
+ xc5000_cfg.tuner = TUNER_XC5000;
+ xc5000_cfg.priv = &ctl;
+
+ v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config,
+ &xc5000_cfg);
+ }
+ break;
+ default:
+ printk(KERN_INFO "Unknown tuner type. Tuner is not configured.\n");
+ break;
+ }
+}
+
+static int fill_board_specific_data(struct tm6000_core *dev)
+{
+ int rc;
+
+ dev->dev_type = tm6000_boards[dev->model].type;
+ dev->tuner_type = tm6000_boards[dev->model].tuner_type;
+ dev->tuner_addr = tm6000_boards[dev->model].tuner_addr;
+
+ dev->gpio = tm6000_boards[dev->model].gpio;
+
+ dev->ir_codes = tm6000_boards[dev->model].ir_codes;
+
+ dev->demod_addr = tm6000_boards[dev->model].demod_addr;
+
+ dev->caps = tm6000_boards[dev->model].caps;
+
+ dev->vinput[0] = tm6000_boards[dev->model].vinput[0];
+ dev->vinput[1] = tm6000_boards[dev->model].vinput[1];
+ dev->vinput[2] = tm6000_boards[dev->model].vinput[2];
+ dev->rinput = tm6000_boards[dev->model].rinput;
+
+ /* setup per-model quirks */
+ switch (dev->model) {
+ case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+ case TM6010_BOARD_HAUPPAUGE_900H:
+ dev->quirks |= TM6000_QUIRK_NO_USB_DELAY;
+ break;
+
+ default:
+ break;
+ }
+
+ /* initialize hardware */
+ rc = tm6000_init(dev);
+ if (rc < 0)
+ return rc;
+
+ return v4l2_device_register(&dev->udev->dev, &dev->v4l2_dev);
+}
+
+
+static void use_alternative_detection_method(struct tm6000_core *dev)
+{
+ int i, model = -1;
+
+ if (!dev->eedata_size)
+ return;
+
+ for (i = 0; i < ARRAY_SIZE(tm6000_boards); i++) {
+ if (!tm6000_boards[i].eename_size)
+ continue;
+ if (dev->eedata_size < tm6000_boards[i].eename_pos +
+ tm6000_boards[i].eename_size)
+ continue;
+
+ if (!memcmp(&dev->eedata[tm6000_boards[i].eename_pos],
+ tm6000_boards[i].eename,
+ tm6000_boards[i].eename_size)) {
+ model = i;
+ break;
+ }
+ }
+ if (model < 0) {
+ printk(KERN_INFO "Device has eeprom but is currently unknown\n");
+ return;
+ }
+
+ dev->model = model;
+
+ printk(KERN_INFO "Device identified via eeprom as %s (type = %d)\n",
+ tm6000_boards[model].name, model);
+}
+
+#if defined(CONFIG_MODULES) && defined(MODULE)
+static void request_module_async(struct work_struct *work)
+{
+ struct tm6000_core *dev = container_of(work, struct tm6000_core,
+ request_module_wk);
+
+ request_module("tm6000-alsa");
+
+ if (dev->caps.has_dvb)
+ request_module("tm6000-dvb");
+}
+
+static void request_modules(struct tm6000_core *dev)
+{
+ INIT_WORK(&dev->request_module_wk, request_module_async);
+ schedule_work(&dev->request_module_wk);
+}
+
+static void flush_request_modules(struct tm6000_core *dev)
+{
+ flush_work(&dev->request_module_wk);
+}
+#else
+#define request_modules(dev)
+#define flush_request_modules(dev)
+#endif /* CONFIG_MODULES */
+
+static int tm6000_init_dev(struct tm6000_core *dev)
+{
+ struct v4l2_frequency f;
+ int rc = 0;
+
+ mutex_init(&dev->lock);
+ mutex_lock(&dev->lock);
+
+ if (!is_generic(dev->model)) {
+ rc = fill_board_specific_data(dev);
+ if (rc < 0)
+ goto err;
+
+ /* register i2c bus */
+ rc = tm6000_i2c_register(dev);
+ if (rc < 0)
+ goto err;
+ } else {
+ /* register i2c bus */
+ rc = tm6000_i2c_register(dev);
+ if (rc < 0)
+ goto err;
+
+ use_alternative_detection_method(dev);
+
+ rc = fill_board_specific_data(dev);
+ if (rc < 0)
+ goto err;
+ }
+
+ /* Default values for STD and resolutions */
+ dev->width = 720;
+ dev->height = 480;
+ dev->norm = V4L2_STD_NTSC_M;
+
+ /* Configure tuner */
+ tm6000_config_tuner(dev);
+
+ /* Set video standard */
+ v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_std, dev->norm);
+
+ /* Set tuner frequency - also loads firmware on xc2028/xc3028 */
+ f.tuner = 0;
+ f.type = V4L2_TUNER_ANALOG_TV;
+ f.frequency = 3092; /* 193.25 MHz */
+ dev->freq = f.frequency;
+ v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f);
+
+ if (dev->caps.has_tda9874)
+ v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+ "tvaudio", I2C_ADDR_TDA9874, NULL);
+
+ /* register and initialize V4L2 */
+ rc = tm6000_v4l2_register(dev);
+ if (rc < 0)
+ goto err;
+
+ tm6000_add_into_devlist(dev);
+ tm6000_init_extension(dev);
+
+ tm6000_ir_init(dev);
+
+ request_modules(dev);
+
+ mutex_unlock(&dev->lock);
+ return 0;
+
+err:
+ mutex_unlock(&dev->lock);
+ return rc;
+}
+
+/* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */
+#define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
+
+static void get_max_endpoint(struct usb_device *udev,
+ struct usb_host_interface *alt,
+ char *msgtype,
+ struct usb_host_endpoint *curr_e,
+ struct tm6000_endpoint *tm_ep)
+{
+ u16 tmp = le16_to_cpu(curr_e->desc.wMaxPacketSize);
+ unsigned int size = tmp & 0x7ff;
+
+ if (udev->speed == USB_SPEED_HIGH)
+ size = size * hb_mult(tmp);
+
+ if (size > tm_ep->maxsize) {
+ tm_ep->endp = curr_e;
+ tm_ep->maxsize = size;
+ tm_ep->bInterfaceNumber = alt->desc.bInterfaceNumber;
+ tm_ep->bAlternateSetting = alt->desc.bAlternateSetting;
+
+ printk(KERN_INFO "tm6000: %s endpoint: 0x%02x (max size=%u bytes)\n",
+ msgtype, curr_e->desc.bEndpointAddress,
+ size);
+ }
+}
+
+/*
+ * tm6000_usb_probe()
+ * checks for supported devices
+ */
+static int tm6000_usb_probe(struct usb_interface *interface,
+ const struct usb_device_id *id)
+{
+ struct usb_device *usbdev;
+ struct tm6000_core *dev = NULL;
+ int i, rc = 0;
+ int nr = 0;
+ char *speed;
+
+ usbdev = usb_get_dev(interface_to_usbdev(interface));
+
+ /* Selects the proper interface */
+ rc = usb_set_interface(usbdev, 0, 1);
+ if (rc < 0)
+ goto err;
+
+ /* Check to see next free device and mark as used */
+ nr = find_first_zero_bit(&tm6000_devused, TM6000_MAXBOARDS);
+ if (nr >= TM6000_MAXBOARDS) {
+ printk(KERN_ERR "tm6000: Supports only %i tm60xx boards.\n", TM6000_MAXBOARDS);
+ usb_put_dev(usbdev);
+ return -ENOMEM;
+ }
+
+ /* Create and initialize dev struct */
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (dev == NULL) {
+ printk(KERN_ERR "tm6000" ": out of memory!\n");
+ usb_put_dev(usbdev);
+ return -ENOMEM;
+ }
+ spin_lock_init(&dev->slock);
+ mutex_init(&dev->usb_lock);
+
+ /* Increment usage count */
+ set_bit(nr, &tm6000_devused);
+ snprintf(dev->name, 29, "tm6000 #%d", nr);
+
+ dev->model = id->driver_info;
+ if (card[nr] < ARRAY_SIZE(tm6000_boards))
+ dev->model = card[nr];
+
+ dev->udev = usbdev;
+ dev->devno = nr;
+
+ switch (usbdev->speed) {
+ case USB_SPEED_LOW:
+ speed = "1.5";
+ break;
+ case USB_SPEED_UNKNOWN:
+ case USB_SPEED_FULL:
+ speed = "12";
+ break;
+ case USB_SPEED_HIGH:
+ speed = "480";
+ break;
+ default:
+ speed = "unknown";
+ }
+
+ /* Get endpoints */
+ for (i = 0; i < interface->num_altsetting; i++) {
+ int ep;
+
+ for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) {
+ struct usb_host_endpoint *e;
+ int dir_out;
+
+ e = &interface->altsetting[i].endpoint[ep];
+
+ dir_out = ((e->desc.bEndpointAddress &
+ USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT);
+
+ printk(KERN_INFO "tm6000: alt %d, interface %i, class %i\n",
+ i,
+ interface->altsetting[i].desc.bInterfaceNumber,
+ interface->altsetting[i].desc.bInterfaceClass);
+
+ switch (e->desc.bmAttributes) {
+ case USB_ENDPOINT_XFER_BULK:
+ if (!dir_out) {
+ get_max_endpoint(usbdev,
+ &interface->altsetting[i],
+ "Bulk IN", e,
+ &dev->bulk_in);
+ } else {
+ get_max_endpoint(usbdev,
+ &interface->altsetting[i],
+ "Bulk OUT", e,
+ &dev->bulk_out);
+ }
+ break;
+ case USB_ENDPOINT_XFER_ISOC:
+ if (!dir_out) {
+ get_max_endpoint(usbdev,
+ &interface->altsetting[i],
+ "ISOC IN", e,
+ &dev->isoc_in);
+ } else {
+ get_max_endpoint(usbdev,
+ &interface->altsetting[i],
+ "ISOC OUT", e,
+ &dev->isoc_out);
+ }
+ break;
+ case USB_ENDPOINT_XFER_INT:
+ if (!dir_out) {
+ get_max_endpoint(usbdev,
+ &interface->altsetting[i],
+ "INT IN", e,
+ &dev->int_in);
+ } else {
+ get_max_endpoint(usbdev,
+ &interface->altsetting[i],
+ "INT OUT", e,
+ &dev->int_out);
+ }
+ break;
+ }
+ }
+ }
+
+
+ printk(KERN_INFO "tm6000: New video device @ %s Mbps (%04x:%04x, ifnum %d)\n",
+ speed,
+ le16_to_cpu(dev->udev->descriptor.idVendor),
+ le16_to_cpu(dev->udev->descriptor.idProduct),
+ interface->altsetting->desc.bInterfaceNumber);
+
+/* check if the the device has the iso in endpoint at the correct place */
+ if (!dev->isoc_in.endp) {
+ printk(KERN_ERR "tm6000: probing error: no IN ISOC endpoint!\n");
+ rc = -ENODEV;
+
+ goto err;
+ }
+
+ /* save our data pointer in this interface device */
+ usb_set_intfdata(interface, dev);
+
+ printk(KERN_INFO "tm6000: Found %s\n", tm6000_boards[dev->model].name);
+
+ rc = tm6000_init_dev(dev);
+ if (rc < 0)
+ goto err;
+
+ return 0;
+
+err:
+ printk(KERN_ERR "tm6000: Error %d while registering\n", rc);
+
+ clear_bit(nr, &tm6000_devused);
+ usb_put_dev(usbdev);
+
+ kfree(dev);
+ return rc;
+}
+
+/*
+ * tm6000_usb_disconnect()
+ * called when the device gets diconencted
+ * video device will be unregistered on v4l2_close in case it is still open
+ */
+static void tm6000_usb_disconnect(struct usb_interface *interface)
+{
+ struct tm6000_core *dev = usb_get_intfdata(interface);
+ usb_set_intfdata(interface, NULL);
+
+ if (!dev)
+ return;
+
+ printk(KERN_INFO "tm6000: disconnecting %s\n", dev->name);
+
+ flush_request_modules(dev);
+
+ tm6000_ir_fini(dev);
+
+ if (dev->gpio.power_led) {
+ switch (dev->model) {
+ case TM6010_BOARD_HAUPPAUGE_900H:
+ case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+ case TM6010_BOARD_TWINHAN_TU501:
+ /* Power led off */
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.power_led, 0x01);
+ msleep(15);
+ break;
+ case TM6010_BOARD_BEHOLD_WANDER:
+ case TM6010_BOARD_BEHOLD_VOYAGER:
+ case TM6010_BOARD_BEHOLD_WANDER_LITE:
+ case TM6010_BOARD_BEHOLD_VOYAGER_LITE:
+ /* Power led off */
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.power_led, 0x00);
+ msleep(15);
+ break;
+ }
+ }
+ tm6000_v4l2_unregister(dev);
+
+ tm6000_i2c_unregister(dev);
+
+ v4l2_device_unregister(&dev->v4l2_dev);
+
+ dev->state |= DEV_DISCONNECTED;
+
+ usb_put_dev(dev->udev);
+
+ tm6000_close_extension(dev);
+ tm6000_remove_from_devlist(dev);
+
+ clear_bit(dev->devno, &tm6000_devused);
+ kfree(dev);
+}
+
+static struct usb_driver tm6000_usb_driver = {
+ .name = "tm6000",
+ .probe = tm6000_usb_probe,
+ .disconnect = tm6000_usb_disconnect,
+ .id_table = tm6000_id_table,
+};
+
+module_usb_driver(tm6000_usb_driver);
+
+MODULE_DESCRIPTION("Trident TVMaster TM5600/TM6000/TM6010 USB2 adapter");
+MODULE_AUTHOR("Mauro Carvalho Chehab");
+MODULE_LICENSE("GPL");
Code Review / kvmfornfv.git / blobdiff