Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / drivers / media / usb / stk1160 / stk1160-reg.h

diff --git a/kernel/drivers/media/usb/stk1160/stk1160-reg.h b/kernel/drivers/media/usb/stk1160/stk1160-reg.h
new file mode 100644 (file)
index 0000000..3e49da6
--- /dev/null
+++ b/kernel/drivers/media/usb/stk1160/stk1160-reg.h
@@ -0,0 +1,93 @@
+/*
+ * STK1160 driver
+ *
+ * Copyright (C) 2012 Ezequiel Garcia
+ * <elezegarcia--a.t--gmail.com>
+ *
+ * Based on Easycap driver by R.M. Thomas
+ *     Copyright (C) 2010 R.M. Thomas
+ *     <rmthomas--a.t--sciolus.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+/* GPIO Control */
+#define STK1160_GCTRL                  0x000
+
+/* Remote Wakup Control */
+#define STK1160_RMCTL                  0x00c
+
+/*
+ * Decoder Control Register:
+ * This byte controls capture start/stop
+ * with bit #7 (0x?? OR 0x80 to activate).
+ */
+#define STK1160_DCTRL                  0x100
+
+/* Capture Frame Start Position */
+#define STK116_CFSPO                   0x110
+#define STK116_CFSPO_STX_L             0x110
+#define STK116_CFSPO_STX_H             0x111
+#define STK116_CFSPO_STY_L             0x112
+#define STK116_CFSPO_STY_H             0x113
+
+/* Capture Frame End Position */
+#define STK116_CFEPO                   0x114
+#define STK116_CFEPO_ENX_L             0x114
+#define STK116_CFEPO_ENX_H             0x115
+#define STK116_CFEPO_ENY_L             0x116
+#define STK116_CFEPO_ENY_H             0x117
+
+/* Serial Interface Control  */
+#define STK1160_SICTL                  0x200
+#define STK1160_SICTL_CD               0x202
+#define STK1160_SICTL_SDA              0x203
+
+/* Serial Bus Write */
+#define STK1160_SBUSW                  0x204
+#define STK1160_SBUSW_WA               0x204
+#define STK1160_SBUSW_WD               0x205
+
+/* Serial Bus Read */
+#define STK1160_SBUSR                  0x208
+#define STK1160_SBUSR_RA               0x208
+#define STK1160_SBUSR_RD               0x209
+
+/* Alternate Serial Inteface Control */
+#define STK1160_ASIC                   0x2fc
+
+/* PLL Select Options */
+#define STK1160_PLLSO                  0x018
+
+/* PLL Frequency Divider */
+#define STK1160_PLLFD                  0x01c
+
+/* Timing Generator */
+#define STK1160_TIGEN                  0x300
+
+/* Timing Control Parameter */
+#define STK1160_TICTL                  0x350
+
+/* AC97 Audio Control */
+#define STK1160_AC97CTL_0              0x500
+#define STK1160_AC97CTL_1              0x504
+
+/* Use [0:6] bits of register 0x504 to set codec command address */
+#define STK1160_AC97_ADDR              0x504
+/* Use [16:31] bits of register 0x500 to set codec command data */
+#define STK1160_AC97_CMD               0x502
+
+/* Audio I2S Interface */
+#define STK1160_I2SCTL                 0x50c
+
+/* EEPROM Interface */
+#define STK1160_EEPROM_SZ              0x5f0