--- /dev/null
+/*
+ * STK1160 driver
+ *
+ * Copyright (C) 2012 Ezequiel Garcia
+ * <elezegarcia--a.t--gmail.com>
+ *
+ * Based on Easycap driver by R.M. Thomas
+ * Copyright (C) 2010 R.M. Thomas
+ * <rmthomas--a.t--sciolus.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/i2c.h>
+
+#include "stk1160.h"
+#include "stk1160-reg.h"
+
+static unsigned int i2c_debug;
+module_param(i2c_debug, int, 0644);
+MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]");
+
+#define dprintk_i2c(fmt, args...) \
+do { \
+ if (i2c_debug) \
+ printk(KERN_DEBUG fmt, ##args); \
+} while (0)
+
+static int stk1160_i2c_busy_wait(struct stk1160 *dev, u8 wait_bit_mask)
+{
+ unsigned long end;
+ u8 flag;
+
+ /* Wait until read/write finish bit is set */
+ end = jiffies + msecs_to_jiffies(STK1160_I2C_TIMEOUT);
+ while (time_is_after_jiffies(end)) {
+
+ stk1160_read_reg(dev, STK1160_SICTL+1, &flag);
+ /* read/write done? */
+ if (flag & wait_bit_mask)
+ goto done;
+
+ usleep_range(10 * USEC_PER_MSEC, 20 * USEC_PER_MSEC);
+ }
+
+ return -ETIMEDOUT;
+
+done:
+ return 0;
+}
+
+static int stk1160_i2c_write_reg(struct stk1160 *dev, u8 addr,
+ u8 reg, u8 value)
+{
+ int rc;
+
+ /* Set serial device address */
+ rc = stk1160_write_reg(dev, STK1160_SICTL_SDA, addr);
+ if (rc < 0)
+ return rc;
+
+ /* Set i2c device register sub-address */
+ rc = stk1160_write_reg(dev, STK1160_SBUSW_WA, reg);
+ if (rc < 0)
+ return rc;
+
+ /* Set i2c device register value */
+ rc = stk1160_write_reg(dev, STK1160_SBUSW_WD, value);
+ if (rc < 0)
+ return rc;
+
+ /* Start write now */
+ rc = stk1160_write_reg(dev, STK1160_SICTL, 0x01);
+ if (rc < 0)
+ return rc;
+
+ rc = stk1160_i2c_busy_wait(dev, 0x04);
+ if (rc < 0)
+ return rc;
+
+ return 0;
+}
+
+static int stk1160_i2c_read_reg(struct stk1160 *dev, u8 addr,
+ u8 reg, u8 *value)
+{
+ int rc;
+
+ /* Set serial device address */
+ rc = stk1160_write_reg(dev, STK1160_SICTL_SDA, addr);
+ if (rc < 0)
+ return rc;
+
+ /* Set i2c device register sub-address */
+ rc = stk1160_write_reg(dev, STK1160_SBUSR_RA, reg);
+ if (rc < 0)
+ return rc;
+
+ /* Start read now */
+ rc = stk1160_write_reg(dev, STK1160_SICTL, 0x20);
+ if (rc < 0)
+ return rc;
+
+ rc = stk1160_i2c_busy_wait(dev, 0x01);
+ if (rc < 0)
+ return rc;
+
+ rc = stk1160_read_reg(dev, STK1160_SBUSR_RD, value);
+ if (rc < 0)
+ return rc;
+
+ return 0;
+}
+
+/*
+ * stk1160_i2c_check_for_device()
+ * check if there is a i2c_device at the supplied address
+ */
+static int stk1160_i2c_check_for_device(struct stk1160 *dev,
+ unsigned char addr)
+{
+ int rc;
+
+ /* Set serial device address */
+ rc = stk1160_write_reg(dev, STK1160_SICTL_SDA, addr);
+ if (rc < 0)
+ return rc;
+
+ /* Set device sub-address, we'll chip version reg */
+ rc = stk1160_write_reg(dev, STK1160_SBUSR_RA, 0x00);
+ if (rc < 0)
+ return rc;
+
+ /* Start read now */
+ rc = stk1160_write_reg(dev, STK1160_SICTL, 0x20);
+ if (rc < 0)
+ return rc;
+
+ rc = stk1160_i2c_busy_wait(dev, 0x01);
+ if (rc < 0)
+ return -ENODEV;
+
+ return 0;
+}
+
+/*
+ * stk1160_i2c_xfer()
+ * the main i2c transfer function
+ */
+static int stk1160_i2c_xfer(struct i2c_adapter *i2c_adap,
+ struct i2c_msg msgs[], int num)
+{
+ struct stk1160 *dev = i2c_adap->algo_data;
+ int addr, rc, i;
+
+ for (i = 0; i < num; i++) {
+ addr = msgs[i].addr << 1;
+ dprintk_i2c("%s: addr=%x", __func__, addr);
+
+ if (!msgs[i].len) {
+ /* no len: check only for device presence */
+ rc = stk1160_i2c_check_for_device(dev, addr);
+ if (rc < 0) {
+ dprintk_i2c(" no device\n");
+ return rc;
+ }
+
+ } else if (msgs[i].flags & I2C_M_RD) {
+ /* read request without preceding register selection */
+ dprintk_i2c(" subaddr not selected");
+ rc = -EOPNOTSUPP;
+ goto err;
+
+ } else if (i + 1 < num && msgs[i].len <= 2 &&
+ (msgs[i + 1].flags & I2C_M_RD) &&
+ msgs[i].addr == msgs[i + 1].addr) {
+
+ if (msgs[i].len != 1 || msgs[i + 1].len != 1) {
+ dprintk_i2c(" len not supported");
+ rc = -EOPNOTSUPP;
+ goto err;
+ }
+
+ dprintk_i2c(" subaddr=%x", msgs[i].buf[0]);
+
+ rc = stk1160_i2c_read_reg(dev, addr, msgs[i].buf[0],
+ msgs[i + 1].buf);
+
+ dprintk_i2c(" read=%x", *msgs[i + 1].buf);
+
+ /* consumed two msgs, so we skip one of them */
+ i++;
+
+ } else {
+ if (msgs[i].len != 2) {
+ dprintk_i2c(" len not supported");
+ rc = -EOPNOTSUPP;
+ goto err;
+ }
+
+ dprintk_i2c(" subaddr=%x write=%x",
+ msgs[i].buf[0], msgs[i].buf[1]);
+
+ rc = stk1160_i2c_write_reg(dev, addr, msgs[i].buf[0],
+ msgs[i].buf[1]);
+ }
+
+ if (rc < 0)
+ goto err;
+ dprintk_i2c(" OK\n");
+ }
+
+ return num;
+err:
+ dprintk_i2c(" ERROR: %d\n", rc);
+ return num;
+}
+
+/*
+ * functionality(), what da heck is this?
+ */
+static u32 functionality(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_SMBUS_EMUL;
+}
+
+static struct i2c_algorithm algo = {
+ .master_xfer = stk1160_i2c_xfer,
+ .functionality = functionality,
+};
+
+static struct i2c_adapter adap_template = {
+ .owner = THIS_MODULE,
+ .name = "stk1160",
+ .algo = &algo,
+};
+
+static struct i2c_client client_template = {
+ .name = "stk1160 internal",
+};
+
+/*
+ * stk1160_i2c_register()
+ * register i2c bus
+ */
+int stk1160_i2c_register(struct stk1160 *dev)
+{
+ int rc;
+
+ dev->i2c_adap = adap_template;
+ dev->i2c_adap.dev.parent = dev->dev;
+ strcpy(dev->i2c_adap.name, "stk1160");
+ dev->i2c_adap.algo_data = dev;
+
+ i2c_set_adapdata(&dev->i2c_adap, &dev->v4l2_dev);
+
+ rc = i2c_add_adapter(&dev->i2c_adap);
+ if (rc < 0) {
+ stk1160_err("cannot add i2c adapter (%d)\n", rc);
+ return rc;
+ }
+
+ dev->i2c_client = client_template;
+ dev->i2c_client.adapter = &dev->i2c_adap;
+
+ /* Set i2c clock divider device address */
+ stk1160_write_reg(dev, STK1160_SICTL_CD, 0x0f);
+
+ /* ??? */
+ stk1160_write_reg(dev, STK1160_ASIC + 3, 0x00);
+
+ return 0;
+}
+
+/*
+ * stk1160_i2c_unregister()
+ * unregister i2c_bus
+ */
+int stk1160_i2c_unregister(struct stk1160 *dev)
+{
+ i2c_del_adapter(&dev->i2c_adap);
+ return 0;
+}
Code Review / kvmfornfv.git / blobdiff