Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / drivers / media / usb / em28xx / Kconfig

diff --git a/kernel/drivers/media/usb/em28xx/Kconfig b/kernel/drivers/media/usb/em28xx/Kconfig
new file mode 100644 (file)
index 0000000..e382210
--- /dev/null
+++ b/kernel/drivers/media/usb/em28xx/Kconfig
@@ -0,0 +1,73 @@
+config VIDEO_EM28XX
+       tristate "Empia EM28xx USB devices support"
+       depends on VIDEO_DEV && I2C
+       select VIDEO_TUNER
+       select VIDEO_TVEEPROM
+
+config VIDEO_EM28XX_V4L2
+       tristate "Empia EM28xx analog TV, video capture and/or webcam support"
+       depends on VIDEO_EM28XX
+       select VIDEOBUF2_VMALLOC
+       select VIDEO_SAA711X if MEDIA_SUBDRV_AUTOSELECT
+       select VIDEO_TVP5150 if MEDIA_SUBDRV_AUTOSELECT
+       select VIDEO_MSP3400 if MEDIA_SUBDRV_AUTOSELECT
+       select VIDEO_MT9V011 if MEDIA_SUBDRV_AUTOSELECT
+
+       ---help---
+         This is a video4linux driver for Empia 28xx based TV cards.
+
+         To compile this driver as a module, choose M here: the
+         module will be called em28xx
+
+config VIDEO_EM28XX_ALSA
+       depends on VIDEO_EM28XX && SND
+       select SND_PCM
+       tristate "Empia EM28xx ALSA audio module"
+       ---help---
+         This is an ALSA driver for some Empia 28xx based TV cards.
+
+         This is not required for em2800/em2820/em2821 boards. However,
+         newer em28xx devices uses Vendor Class for audio, instead of
+         implementing the USB Audio Class. For those chips, this module
+         will enable digital audio.
+
+         To compile this driver as a module, choose M here: the
+         module will be called em28xx-alsa
+
+config VIDEO_EM28XX_DVB
+       tristate "DVB/ATSC Support for em28xx based TV cards"
+       depends on VIDEO_EM28XX && DVB_CORE
+       select DVB_LGDT330X if MEDIA_SUBDRV_AUTOSELECT
+       select DVB_LGDT3305 if MEDIA_SUBDRV_AUTOSELECT
+       select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT
+       select DVB_TDA10023 if MEDIA_SUBDRV_AUTOSELECT
+       select DVB_S921 if MEDIA_SUBDRV_AUTOSELECT
+       select DVB_DRXD if MEDIA_SUBDRV_AUTOSELECT
+       select DVB_CXD2820R if MEDIA_SUBDRV_AUTOSELECT
+       select DVB_DRXK if MEDIA_SUBDRV_AUTOSELECT
+       select DVB_TDA18271C2DD if MEDIA_SUBDRV_AUTOSELECT
+       select DVB_TDA10071 if MEDIA_SUBDRV_AUTOSELECT
+       select DVB_A8293 if MEDIA_SUBDRV_AUTOSELECT
+       select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT
+       select DVB_S5H1409 if MEDIA_SUBDRV_AUTOSELECT
+       select DVB_MB86A20S if MEDIA_SUBDRV_AUTOSELECT
+       select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT
+       select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT
+       select MEDIA_TUNER_TDA18212 if MEDIA_SUBDRV_AUTOSELECT
+       select DVB_M88DS3103 if MEDIA_SUBDRV_AUTOSELECT
+       select DVB_TS2020 if MEDIA_SUBDRV_AUTOSELECT
+       select DVB_DRX39XYJ if MEDIA_SUBDRV_AUTOSELECT
+       select DVB_SI2168 if MEDIA_SUBDRV_AUTOSELECT
+       select MEDIA_TUNER_SI2157 if MEDIA_SUBDRV_AUTOSELECT
+       ---help---
+         This adds support for DVB cards based on the
+         Empiatech em28xx chips.
+
+config VIDEO_EM28XX_RC
+        tristate "EM28XX Remote Controller support"
+        depends on RC_CORE
+        depends on VIDEO_EM28XX
+        depends on !(RC_CORE=m && VIDEO_EM28XX=y)
+        default VIDEO_EM28XX
+        ---help---
+          Enables Remote Controller support on em28xx driver.