--- /dev/null
+/*
+ * mxl111sf-phy.c - driver for the MaxLinear MXL111SF
+ *
+ * Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "mxl111sf-phy.h"
+#include "mxl111sf-reg.h"
+
+int mxl111sf_init_tuner_demod(struct mxl111sf_state *state)
+{
+ struct mxl111sf_reg_ctrl_info mxl_111_overwrite_default[] = {
+ {0x07, 0xff, 0x0c},
+ {0x58, 0xff, 0x9d},
+ {0x09, 0xff, 0x00},
+ {0x06, 0xff, 0x06},
+ {0xc8, 0xff, 0x40}, /* ED_LE_WIN_OLD = 0 */
+ {0x8d, 0x01, 0x01}, /* NEGATE_Q */
+ {0x32, 0xff, 0xac}, /* DIG_RFREFSELECT = 12 */
+ {0x42, 0xff, 0x43}, /* DIG_REG_AMP = 4 */
+ {0x74, 0xff, 0xc4}, /* SSPUR_FS_PRIO = 4 */
+ {0x71, 0xff, 0xe6}, /* SPUR_ROT_PRIO_VAL = 1 */
+ {0x83, 0xff, 0x64}, /* INF_FILT1_THD_SC = 100 */
+ {0x85, 0xff, 0x64}, /* INF_FILT2_THD_SC = 100 */
+ {0x88, 0xff, 0xf0}, /* INF_THD = 240 */
+ {0x6f, 0xf0, 0xb0}, /* DFE_DLY = 11 */
+ {0x00, 0xff, 0x01}, /* Change to page 1 */
+ {0x81, 0xff, 0x11}, /* DSM_FERR_BYPASS = 1 */
+ {0xf4, 0xff, 0x07}, /* DIG_FREQ_CORR = 1 */
+ {0xd4, 0x1f, 0x0f}, /* SPUR_TEST_NOISE_TH = 15 */
+ {0xd6, 0xff, 0x0c}, /* SPUR_TEST_NOISE_PAPR = 12 */
+ {0x00, 0xff, 0x00}, /* Change to page 0 */
+ {0, 0, 0}
+ };
+
+ mxl_debug("()");
+
+ return mxl111sf_ctrl_program_regs(state, mxl_111_overwrite_default);
+}
+
+int mxl1x1sf_soft_reset(struct mxl111sf_state *state)
+{
+ int ret;
+ mxl_debug("()");
+
+ ret = mxl111sf_write_reg(state, 0xff, 0x00); /* AIC */
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_write_reg(state, 0x02, 0x01); /* get out of reset */
+ mxl_fail(ret);
+fail:
+ return ret;
+}
+
+int mxl1x1sf_set_device_mode(struct mxl111sf_state *state, int mode)
+{
+ int ret;
+
+ mxl_debug("(%s)", MXL_SOC_MODE == mode ?
+ "MXL_SOC_MODE" : "MXL_TUNER_MODE");
+
+ /* set device mode */
+ ret = mxl111sf_write_reg(state, 0x03,
+ MXL_SOC_MODE == mode ? 0x01 : 0x00);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_write_reg_mask(state,
+ 0x7d, 0x40, MXL_SOC_MODE == mode ?
+ 0x00 : /* enable impulse noise filter,
+ INF_BYP = 0 */
+ 0x40); /* disable impulse noise filter,
+ INF_BYP = 1 */
+ if (mxl_fail(ret))
+ goto fail;
+
+ state->device_mode = mode;
+fail:
+ return ret;
+}
+
+/* power up tuner */
+int mxl1x1sf_top_master_ctrl(struct mxl111sf_state *state, int onoff)
+{
+ mxl_debug("(%d)", onoff);
+
+ return mxl111sf_write_reg(state, 0x01, onoff ? 0x01 : 0x00);
+}
+
+int mxl111sf_disable_656_port(struct mxl111sf_state *state)
+{
+ mxl_debug("()");
+
+ return mxl111sf_write_reg_mask(state, 0x12, 0x04, 0x00);
+}
+
+int mxl111sf_enable_usb_output(struct mxl111sf_state *state)
+{
+ mxl_debug("()");
+
+ return mxl111sf_write_reg_mask(state, 0x17, 0x40, 0x00);
+}
+
+/* initialize TSIF as input port of MxL1X1SF for MPEG2 data transfer */
+int mxl111sf_config_mpeg_in(struct mxl111sf_state *state,
+ unsigned int parallel_serial,
+ unsigned int msb_lsb_1st,
+ unsigned int clock_phase,
+ unsigned int mpeg_valid_pol,
+ unsigned int mpeg_sync_pol)
+{
+ int ret;
+ u8 mode, tmp;
+
+ mxl_debug("(%u,%u,%u,%u,%u)", parallel_serial, msb_lsb_1st,
+ clock_phase, mpeg_valid_pol, mpeg_sync_pol);
+
+ /* Enable PIN MUX */
+ ret = mxl111sf_write_reg(state, V6_PIN_MUX_MODE_REG, V6_ENABLE_PIN_MUX);
+ mxl_fail(ret);
+
+ /* Configure MPEG Clock phase */
+ mxl111sf_read_reg(state, V6_MPEG_IN_CLK_INV_REG, &mode);
+
+ if (clock_phase == TSIF_NORMAL)
+ mode &= ~V6_INVERTED_CLK_PHASE;
+ else
+ mode |= V6_INVERTED_CLK_PHASE;
+
+ ret = mxl111sf_write_reg(state, V6_MPEG_IN_CLK_INV_REG, mode);
+ mxl_fail(ret);
+
+ /* Configure data input mode, MPEG Valid polarity, MPEG Sync polarity
+ * Get current configuration */
+ ret = mxl111sf_read_reg(state, V6_MPEG_IN_CTRL_REG, &mode);
+ mxl_fail(ret);
+
+ /* Data Input mode */
+ if (parallel_serial == TSIF_INPUT_PARALLEL) {
+ /* Disable serial mode */
+ mode &= ~V6_MPEG_IN_DATA_SERIAL;
+
+ /* Enable Parallel mode */
+ mode |= V6_MPEG_IN_DATA_PARALLEL;
+ } else {
+ /* Disable Parallel mode */
+ mode &= ~V6_MPEG_IN_DATA_PARALLEL;
+
+ /* Enable Serial Mode */
+ mode |= V6_MPEG_IN_DATA_SERIAL;
+
+ /* If serial interface is chosen, configure
+ MSB or LSB order in transmission */
+ ret = mxl111sf_read_reg(state,
+ V6_MPEG_INOUT_BIT_ORDER_CTRL_REG,
+ &tmp);
+ mxl_fail(ret);
+
+ if (msb_lsb_1st == MPEG_SER_MSB_FIRST_ENABLED)
+ tmp |= V6_MPEG_SER_MSB_FIRST;
+ else
+ tmp &= ~V6_MPEG_SER_MSB_FIRST;
+
+ ret = mxl111sf_write_reg(state,
+ V6_MPEG_INOUT_BIT_ORDER_CTRL_REG,
+ tmp);
+ mxl_fail(ret);
+ }
+
+ /* MPEG Sync polarity */
+ if (mpeg_sync_pol == TSIF_NORMAL)
+ mode &= ~V6_INVERTED_MPEG_SYNC;
+ else
+ mode |= V6_INVERTED_MPEG_SYNC;
+
+ /* MPEG Valid polarity */
+ if (mpeg_valid_pol == 0)
+ mode &= ~V6_INVERTED_MPEG_VALID;
+ else
+ mode |= V6_INVERTED_MPEG_VALID;
+
+ ret = mxl111sf_write_reg(state, V6_MPEG_IN_CTRL_REG, mode);
+ mxl_fail(ret);
+
+ return ret;
+}
+
+int mxl111sf_init_i2s_port(struct mxl111sf_state *state, u8 sample_size)
+{
+ static struct mxl111sf_reg_ctrl_info init_i2s[] = {
+ {0x1b, 0xff, 0x1e}, /* pin mux mode, Choose 656/I2S input */
+ {0x15, 0x60, 0x60}, /* Enable I2S */
+ {0x17, 0xe0, 0x20}, /* Input, MPEG MODE USB,
+ Inverted 656 Clock, I2S_SOFT_RESET,
+ 0 : Normal operation, 1 : Reset State */
+#if 0
+ {0x12, 0x01, 0x00}, /* AUDIO_IRQ_CLR (Overflow Indicator) */
+#endif
+ {0x00, 0xff, 0x02}, /* Change to Control Page */
+ {0x26, 0x0d, 0x0d}, /* I2S_MODE & BT656_SRC_SEL for FPGA only */
+ {0x00, 0xff, 0x00},
+ {0, 0, 0}
+ };
+ int ret;
+
+ mxl_debug("(0x%02x)", sample_size);
+
+ ret = mxl111sf_ctrl_program_regs(state, init_i2s);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_write_reg(state, V6_I2S_NUM_SAMPLES_REG, sample_size);
+ mxl_fail(ret);
+fail:
+ return ret;
+}
+
+int mxl111sf_disable_i2s_port(struct mxl111sf_state *state)
+{
+ static struct mxl111sf_reg_ctrl_info disable_i2s[] = {
+ {0x15, 0x40, 0x00},
+ {0, 0, 0}
+ };
+
+ mxl_debug("()");
+
+ return mxl111sf_ctrl_program_regs(state, disable_i2s);
+}
+
+int mxl111sf_config_i2s(struct mxl111sf_state *state,
+ u8 msb_start_pos, u8 data_width)
+{
+ int ret;
+ u8 tmp;
+
+ mxl_debug("(0x%02x, 0x%02x)", msb_start_pos, data_width);
+
+ ret = mxl111sf_read_reg(state, V6_I2S_STREAM_START_BIT_REG, &tmp);
+ if (mxl_fail(ret))
+ goto fail;
+
+ tmp &= 0xe0;
+ tmp |= msb_start_pos;
+ ret = mxl111sf_write_reg(state, V6_I2S_STREAM_START_BIT_REG, tmp);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_read_reg(state, V6_I2S_STREAM_END_BIT_REG, &tmp);
+ if (mxl_fail(ret))
+ goto fail;
+
+ tmp &= 0xe0;
+ tmp |= data_width;
+ ret = mxl111sf_write_reg(state, V6_I2S_STREAM_END_BIT_REG, tmp);
+ mxl_fail(ret);
+fail:
+ return ret;
+}
+
+int mxl111sf_config_spi(struct mxl111sf_state *state, int onoff)
+{
+ u8 val;
+ int ret;
+
+ mxl_debug("(%d)", onoff);
+
+ ret = mxl111sf_write_reg(state, 0x00, 0x02);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_read_reg(state, V8_SPI_MODE_REG, &val);
+ if (mxl_fail(ret))
+ goto fail;
+
+ if (onoff)
+ val |= 0x04;
+ else
+ val &= ~0x04;
+
+ ret = mxl111sf_write_reg(state, V8_SPI_MODE_REG, val);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_write_reg(state, 0x00, 0x00);
+ mxl_fail(ret);
+fail:
+ return ret;
+}
+
+int mxl111sf_idac_config(struct mxl111sf_state *state,
+ u8 control_mode, u8 current_setting,
+ u8 current_value, u8 hysteresis_value)
+{
+ int ret;
+ u8 val;
+ /* current value will be set for both automatic & manual IDAC control */
+ val = current_value;
+
+ if (control_mode == IDAC_MANUAL_CONTROL) {
+ /* enable manual control of IDAC */
+ val |= IDAC_MANUAL_CONTROL_BIT_MASK;
+
+ if (current_setting == IDAC_CURRENT_SINKING_ENABLE)
+ /* enable current sinking in manual mode */
+ val |= IDAC_CURRENT_SINKING_BIT_MASK;
+ else
+ /* disable current sinking in manual mode */
+ val &= ~IDAC_CURRENT_SINKING_BIT_MASK;
+ } else {
+ /* disable manual control of IDAC */
+ val &= ~IDAC_MANUAL_CONTROL_BIT_MASK;
+
+ /* set hysteresis value reg: 0x0B<5:0> */
+ ret = mxl111sf_write_reg(state, V6_IDAC_HYSTERESIS_REG,
+ (hysteresis_value & 0x3F));
+ mxl_fail(ret);
+ }
+
+ ret = mxl111sf_write_reg(state, V6_IDAC_SETTINGS_REG, val);
+ mxl_fail(ret);
+
+ return ret;
+}
Code Review / kvmfornfv.git / blobdiff