--- /dev/null
+/*
+ * budget-ci.c: driver for the SAA7146 based Budget DVB cards
+ *
+ * Compiled from various sources by Michael Hunold <michael@mihu.de>
+ *
+ * msp430 IR support contributed by Jack Thomasson <jkt@Helius.COM>
+ * partially based on the Siemens DVB driver by Ralph+Marcus Metzler
+ *
+ * CI interface support (c) 2004 Andrew de Quincey <adq_dvb@lidskialf.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
+ *
+ *
+ * the project's page is at http://www.linuxtv.org/
+ */
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <media/rc-core.h>
+
+#include "budget.h"
+
+#include "dvb_ca_en50221.h"
+#include "stv0299.h"
+#include "stv0297.h"
+#include "tda1004x.h"
+#include "stb0899_drv.h"
+#include "stb0899_reg.h"
+#include "stb0899_cfg.h"
+#include "stb6100.h"
+#include "stb6100_cfg.h"
+#include "lnbp21.h"
+#include "bsbe1.h"
+#include "bsru6.h"
+#include "tda1002x.h"
+#include "tda827x.h"
+#include "bsbe1-d01a.h"
+
+#define MODULE_NAME "budget_ci"
+
+/*
+ * Regarding DEBIADDR_IR:
+ * Some CI modules hang if random addresses are read.
+ * Using address 0x4000 for the IR read means that we
+ * use the same address as for CI version, which should
+ * be a safe default.
+ */
+#define DEBIADDR_IR 0x4000
+#define DEBIADDR_CICONTROL 0x0000
+#define DEBIADDR_CIVERSION 0x4000
+#define DEBIADDR_IO 0x1000
+#define DEBIADDR_ATTR 0x3000
+
+#define CICONTROL_RESET 0x01
+#define CICONTROL_ENABLETS 0x02
+#define CICONTROL_CAMDETECT 0x08
+
+#define DEBICICTL 0x00420000
+#define DEBICICAM 0x02420000
+
+#define SLOTSTATUS_NONE 1
+#define SLOTSTATUS_PRESENT 2
+#define SLOTSTATUS_RESET 4
+#define SLOTSTATUS_READY 8
+#define SLOTSTATUS_OCCUPIED (SLOTSTATUS_PRESENT|SLOTSTATUS_RESET|SLOTSTATUS_READY)
+
+/* RC5 device wildcard */
+#define IR_DEVICE_ANY 255
+
+static int rc5_device = -1;
+module_param(rc5_device, int, 0644);
+MODULE_PARM_DESC(rc5_device, "only IR commands to given RC5 device (device = 0 - 31, any device = 255, default: autodetect)");
+
+static int ir_debug;
+module_param(ir_debug, int, 0644);
+MODULE_PARM_DESC(ir_debug, "enable debugging information for IR decoding");
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+struct budget_ci_ir {
+ struct rc_dev *dev;
+ struct tasklet_struct msp430_irq_tasklet;
+ char name[72]; /* 40 + 32 for (struct saa7146_dev).name */
+ char phys[32];
+ int rc5_device;
+ u32 ir_key;
+ bool have_command;
+ bool full_rc5; /* Outputs a full RC5 code */
+};
+
+struct budget_ci {
+ struct budget budget;
+ struct tasklet_struct ciintf_irq_tasklet;
+ int slot_status;
+ int ci_irq;
+ struct dvb_ca_en50221 ca;
+ struct budget_ci_ir ir;
+ u8 tuner_pll_address; /* used for philips_tdm1316l configs */
+};
+
+static void msp430_ir_interrupt(unsigned long data)
+{
+ struct budget_ci *budget_ci = (struct budget_ci *) data;
+ struct rc_dev *dev = budget_ci->ir.dev;
+ u32 command = ttpci_budget_debiread(&budget_ci->budget, DEBINOSWAP, DEBIADDR_IR, 2, 1, 0) >> 8;
+
+ /*
+ * The msp430 chip can generate two different bytes, command and device
+ *
+ * type1: X1CCCCCC, C = command bits (0 - 63)
+ * type2: X0TDDDDD, D = device bits (0 - 31), T = RC5 toggle bit
+ *
+ * Each signal from the remote control can generate one or more command
+ * bytes and one or more device bytes. For the repeated bytes, the
+ * highest bit (X) is set. The first command byte is always generated
+ * before the first device byte. Other than that, no specific order
+ * seems to apply. To make life interesting, bytes can also be lost.
+ *
+ * Only when we have a command and device byte, a keypress is
+ * generated.
+ */
+
+ if (ir_debug)
+ printk("budget_ci: received byte 0x%02x\n", command);
+
+ /* Remove repeat bit, we use every command */
+ command = command & 0x7f;
+
+ /* Is this a RC5 command byte? */
+ if (command & 0x40) {
+ budget_ci->ir.have_command = true;
+ budget_ci->ir.ir_key = command & 0x3f;
+ return;
+ }
+
+ /* It's a RC5 device byte */
+ if (!budget_ci->ir.have_command)
+ return;
+ budget_ci->ir.have_command = false;
+
+ if (budget_ci->ir.rc5_device != IR_DEVICE_ANY &&
+ budget_ci->ir.rc5_device != (command & 0x1f))
+ return;
+
+ if (budget_ci->ir.full_rc5) {
+ rc_keydown(dev, RC_TYPE_RC5,
+ RC_SCANCODE_RC5(budget_ci->ir.rc5_device, budget_ci->ir.ir_key),
+ !!(command & 0x20));
+ return;
+ }
+
+ /* FIXME: We should generate complete scancodes for all devices */
+ rc_keydown(dev, RC_TYPE_UNKNOWN, budget_ci->ir.ir_key, !!(command & 0x20));
+}
+
+static int msp430_ir_init(struct budget_ci *budget_ci)
+{
+ struct saa7146_dev *saa = budget_ci->budget.dev;
+ struct rc_dev *dev;
+ int error;
+
+ dev = rc_allocate_device();
+ if (!dev) {
+ printk(KERN_ERR "budget_ci: IR interface initialisation failed\n");
+ return -ENOMEM;
+ }
+
+ snprintf(budget_ci->ir.name, sizeof(budget_ci->ir.name),
+ "Budget-CI dvb ir receiver %s", saa->name);
+ snprintf(budget_ci->ir.phys, sizeof(budget_ci->ir.phys),
+ "pci-%s/ir0", pci_name(saa->pci));
+
+ dev->driver_name = MODULE_NAME;
+ dev->input_name = budget_ci->ir.name;
+ dev->input_phys = budget_ci->ir.phys;
+ dev->input_id.bustype = BUS_PCI;
+ dev->input_id.version = 1;
+ if (saa->pci->subsystem_vendor) {
+ dev->input_id.vendor = saa->pci->subsystem_vendor;
+ dev->input_id.product = saa->pci->subsystem_device;
+ } else {
+ dev->input_id.vendor = saa->pci->vendor;
+ dev->input_id.product = saa->pci->device;
+ }
+ dev->dev.parent = &saa->pci->dev;
+
+ if (rc5_device < 0)
+ budget_ci->ir.rc5_device = IR_DEVICE_ANY;
+ else
+ budget_ci->ir.rc5_device = rc5_device;
+
+ /* Select keymap and address */
+ switch (budget_ci->budget.dev->pci->subsystem_device) {
+ case 0x100c:
+ case 0x100f:
+ case 0x1011:
+ case 0x1012:
+ /* The hauppauge keymap is a superset of these remotes */
+ dev->map_name = RC_MAP_HAUPPAUGE;
+ budget_ci->ir.full_rc5 = true;
+
+ if (rc5_device < 0)
+ budget_ci->ir.rc5_device = 0x1f;
+ break;
+ case 0x1010:
+ case 0x1017:
+ case 0x1019:
+ case 0x101a:
+ case 0x101b:
+ /* for the Technotrend 1500 bundled remote */
+ dev->map_name = RC_MAP_TT_1500;
+ break;
+ default:
+ /* unknown remote */
+ dev->map_name = RC_MAP_BUDGET_CI_OLD;
+ break;
+ }
+ if (!budget_ci->ir.full_rc5)
+ dev->scancode_mask = 0xff;
+
+ error = rc_register_device(dev);
+ if (error) {
+ printk(KERN_ERR "budget_ci: could not init driver for IR device (code %d)\n", error);
+ rc_free_device(dev);
+ return error;
+ }
+
+ budget_ci->ir.dev = dev;
+
+ tasklet_init(&budget_ci->ir.msp430_irq_tasklet, msp430_ir_interrupt,
+ (unsigned long) budget_ci);
+
+ SAA7146_IER_ENABLE(saa, MASK_06);
+ saa7146_setgpio(saa, 3, SAA7146_GPIO_IRQHI);
+
+ return 0;
+}
+
+static void msp430_ir_deinit(struct budget_ci *budget_ci)
+{
+ struct saa7146_dev *saa = budget_ci->budget.dev;
+
+ SAA7146_IER_DISABLE(saa, MASK_06);
+ saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
+ tasklet_kill(&budget_ci->ir.msp430_irq_tasklet);
+
+ rc_unregister_device(budget_ci->ir.dev);
+}
+
+static int ciintf_read_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address)
+{
+ struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
+
+ if (slot != 0)
+ return -EINVAL;
+
+ return ttpci_budget_debiread(&budget_ci->budget, DEBICICAM,
+ DEBIADDR_ATTR | (address & 0xfff), 1, 1, 0);
+}
+
+static int ciintf_write_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address, u8 value)
+{
+ struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
+
+ if (slot != 0)
+ return -EINVAL;
+
+ return ttpci_budget_debiwrite(&budget_ci->budget, DEBICICAM,
+ DEBIADDR_ATTR | (address & 0xfff), 1, value, 1, 0);
+}
+
+static int ciintf_read_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address)
+{
+ struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
+
+ if (slot != 0)
+ return -EINVAL;
+
+ return ttpci_budget_debiread(&budget_ci->budget, DEBICICAM,
+ DEBIADDR_IO | (address & 3), 1, 1, 0);
+}
+
+static int ciintf_write_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address, u8 value)
+{
+ struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
+
+ if (slot != 0)
+ return -EINVAL;
+
+ return ttpci_budget_debiwrite(&budget_ci->budget, DEBICICAM,
+ DEBIADDR_IO | (address & 3), 1, value, 1, 0);
+}
+
+static int ciintf_slot_reset(struct dvb_ca_en50221 *ca, int slot)
+{
+ struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
+ struct saa7146_dev *saa = budget_ci->budget.dev;
+
+ if (slot != 0)
+ return -EINVAL;
+
+ if (budget_ci->ci_irq) {
+ // trigger on RISING edge during reset so we know when READY is re-asserted
+ saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI);
+ }
+ budget_ci->slot_status = SLOTSTATUS_RESET;
+ ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 0, 1, 0);
+ msleep(1);
+ ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1,
+ CICONTROL_RESET, 1, 0);
+
+ saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTHI);
+ ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
+ return 0;
+}
+
+static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot)
+{
+ struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
+ struct saa7146_dev *saa = budget_ci->budget.dev;
+
+ if (slot != 0)
+ return -EINVAL;
+
+ saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTHI);
+ ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
+ return 0;
+}
+
+static int ciintf_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot)
+{
+ struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
+ struct saa7146_dev *saa = budget_ci->budget.dev;
+ int tmp;
+
+ if (slot != 0)
+ return -EINVAL;
+
+ saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTLO);
+
+ tmp = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0);
+ ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1,
+ tmp | CICONTROL_ENABLETS, 1, 0);
+
+ ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTA);
+ return 0;
+}
+
+static void ciintf_interrupt(unsigned long data)
+{
+ struct budget_ci *budget_ci = (struct budget_ci *) data;
+ struct saa7146_dev *saa = budget_ci->budget.dev;
+ unsigned int flags;
+
+ // ensure we don't get spurious IRQs during initialisation
+ if (!budget_ci->budget.ci_present)
+ return;
+
+ // read the CAM status
+ flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0);
+ if (flags & CICONTROL_CAMDETECT) {
+
+ // GPIO should be set to trigger on falling edge if a CAM is present
+ saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQLO);
+
+ if (budget_ci->slot_status & SLOTSTATUS_NONE) {
+ // CAM insertion IRQ
+ budget_ci->slot_status = SLOTSTATUS_PRESENT;
+ dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0,
+ DVB_CA_EN50221_CAMCHANGE_INSERTED);
+
+ } else if (budget_ci->slot_status & SLOTSTATUS_RESET) {
+ // CAM ready (reset completed)
+ budget_ci->slot_status = SLOTSTATUS_READY;
+ dvb_ca_en50221_camready_irq(&budget_ci->ca, 0);
+
+ } else if (budget_ci->slot_status & SLOTSTATUS_READY) {
+ // FR/DA IRQ
+ dvb_ca_en50221_frda_irq(&budget_ci->ca, 0);
+ }
+ } else {
+
+ // trigger on rising edge if a CAM is not present - when a CAM is inserted, we
+ // only want to get the IRQ when it sets READY. If we trigger on the falling edge,
+ // the CAM might not actually be ready yet.
+ saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI);
+
+ // generate a CAM removal IRQ if we haven't already
+ if (budget_ci->slot_status & SLOTSTATUS_OCCUPIED) {
+ // CAM removal IRQ
+ budget_ci->slot_status = SLOTSTATUS_NONE;
+ dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0,
+ DVB_CA_EN50221_CAMCHANGE_REMOVED);
+ }
+ }
+}
+
+static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open)
+{
+ struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
+ unsigned int flags;
+
+ // ensure we don't get spurious IRQs during initialisation
+ if (!budget_ci->budget.ci_present)
+ return -EINVAL;
+
+ // read the CAM status
+ flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0);
+ if (flags & CICONTROL_CAMDETECT) {
+ // mark it as present if it wasn't before
+ if (budget_ci->slot_status & SLOTSTATUS_NONE) {
+ budget_ci->slot_status = SLOTSTATUS_PRESENT;
+ }
+
+ // during a RESET, we check if we can read from IO memory to see when CAM is ready
+ if (budget_ci->slot_status & SLOTSTATUS_RESET) {
+ if (ciintf_read_attribute_mem(ca, slot, 0) == 0x1d) {
+ budget_ci->slot_status = SLOTSTATUS_READY;
+ }
+ }
+ } else {
+ budget_ci->slot_status = SLOTSTATUS_NONE;
+ }
+
+ if (budget_ci->slot_status != SLOTSTATUS_NONE) {
+ if (budget_ci->slot_status & SLOTSTATUS_READY) {
+ return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY;
+ }
+ return DVB_CA_EN50221_POLL_CAM_PRESENT;
+ }
+
+ return 0;
+}
+
+static int ciintf_init(struct budget_ci *budget_ci)
+{
+ struct saa7146_dev *saa = budget_ci->budget.dev;
+ int flags;
+ int result;
+ int ci_version;
+ int ca_flags;
+
+ memset(&budget_ci->ca, 0, sizeof(struct dvb_ca_en50221));
+
+ // enable DEBI pins
+ saa7146_write(saa, MC1, MASK_27 | MASK_11);
+
+ // test if it is there
+ ci_version = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CIVERSION, 1, 1, 0);
+ if ((ci_version & 0xa0) != 0xa0) {
+ result = -ENODEV;
+ goto error;
+ }
+
+ // determine whether a CAM is present or not
+ flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0);
+ budget_ci->slot_status = SLOTSTATUS_NONE;
+ if (flags & CICONTROL_CAMDETECT)
+ budget_ci->slot_status = SLOTSTATUS_PRESENT;
+
+ // version 0xa2 of the CI firmware doesn't generate interrupts
+ if (ci_version == 0xa2) {
+ ca_flags = 0;
+ budget_ci->ci_irq = 0;
+ } else {
+ ca_flags = DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE |
+ DVB_CA_EN50221_FLAG_IRQ_FR |
+ DVB_CA_EN50221_FLAG_IRQ_DA;
+ budget_ci->ci_irq = 1;
+ }
+
+ // register CI interface
+ budget_ci->ca.owner = THIS_MODULE;
+ budget_ci->ca.read_attribute_mem = ciintf_read_attribute_mem;
+ budget_ci->ca.write_attribute_mem = ciintf_write_attribute_mem;
+ budget_ci->ca.read_cam_control = ciintf_read_cam_control;
+ budget_ci->ca.write_cam_control = ciintf_write_cam_control;
+ budget_ci->ca.slot_reset = ciintf_slot_reset;
+ budget_ci->ca.slot_shutdown = ciintf_slot_shutdown;
+ budget_ci->ca.slot_ts_enable = ciintf_slot_ts_enable;
+ budget_ci->ca.poll_slot_status = ciintf_poll_slot_status;
+ budget_ci->ca.data = budget_ci;
+ if ((result = dvb_ca_en50221_init(&budget_ci->budget.dvb_adapter,
+ &budget_ci->ca,
+ ca_flags, 1)) != 0) {
+ printk("budget_ci: CI interface detected, but initialisation failed.\n");
+ goto error;
+ }
+
+ // Setup CI slot IRQ
+ if (budget_ci->ci_irq) {
+ tasklet_init(&budget_ci->ciintf_irq_tasklet, ciintf_interrupt, (unsigned long) budget_ci);
+ if (budget_ci->slot_status != SLOTSTATUS_NONE) {
+ saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQLO);
+ } else {
+ saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI);
+ }
+ SAA7146_IER_ENABLE(saa, MASK_03);
+ }
+
+ // enable interface
+ ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1,
+ CICONTROL_RESET, 1, 0);
+
+ // success!
+ printk("budget_ci: CI interface initialised\n");
+ budget_ci->budget.ci_present = 1;
+
+ // forge a fake CI IRQ so the CAM state is setup correctly
+ if (budget_ci->ci_irq) {
+ flags = DVB_CA_EN50221_CAMCHANGE_REMOVED;
+ if (budget_ci->slot_status != SLOTSTATUS_NONE)
+ flags = DVB_CA_EN50221_CAMCHANGE_INSERTED;
+ dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0, flags);
+ }
+
+ return 0;
+
+error:
+ saa7146_write(saa, MC1, MASK_27);
+ return result;
+}
+
+static void ciintf_deinit(struct budget_ci *budget_ci)
+{
+ struct saa7146_dev *saa = budget_ci->budget.dev;
+
+ // disable CI interrupts
+ if (budget_ci->ci_irq) {
+ SAA7146_IER_DISABLE(saa, MASK_03);
+ saa7146_setgpio(saa, 0, SAA7146_GPIO_INPUT);
+ tasklet_kill(&budget_ci->ciintf_irq_tasklet);
+ }
+
+ // reset interface
+ ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 0, 1, 0);
+ msleep(1);
+ ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1,
+ CICONTROL_RESET, 1, 0);
+
+ // disable TS data stream to CI interface
+ saa7146_setgpio(saa, 1, SAA7146_GPIO_INPUT);
+
+ // release the CA device
+ dvb_ca_en50221_release(&budget_ci->ca);
+
+ // disable DEBI pins
+ saa7146_write(saa, MC1, MASK_27);
+}
+
+static void budget_ci_irq(struct saa7146_dev *dev, u32 * isr)
+{
+ struct budget_ci *budget_ci = (struct budget_ci *) dev->ext_priv;
+
+ dprintk(8, "dev: %p, budget_ci: %p\n", dev, budget_ci);
+
+ if (*isr & MASK_06)
+ tasklet_schedule(&budget_ci->ir.msp430_irq_tasklet);
+
+ if (*isr & MASK_10)
+ ttpci_budget_irq10_handler(dev, isr);
+
+ if ((*isr & MASK_03) && (budget_ci->budget.ci_present) && (budget_ci->ci_irq))
+ tasklet_schedule(&budget_ci->ciintf_irq_tasklet);
+}
+
+static u8 philips_su1278_tt_inittab[] = {
+ 0x01, 0x0f,
+ 0x02, 0x30,
+ 0x03, 0x00,
+ 0x04, 0x5b,
+ 0x05, 0x85,
+ 0x06, 0x02,
+ 0x07, 0x00,
+ 0x08, 0x02,
+ 0x09, 0x00,
+ 0x0C, 0x01,
+ 0x0D, 0x81,
+ 0x0E, 0x44,
+ 0x0f, 0x14,
+ 0x10, 0x3c,
+ 0x11, 0x84,
+ 0x12, 0xda,
+ 0x13, 0x97,
+ 0x14, 0x95,
+ 0x15, 0xc9,
+ 0x16, 0x19,
+ 0x17, 0x8c,
+ 0x18, 0x59,
+ 0x19, 0xf8,
+ 0x1a, 0xfe,
+ 0x1c, 0x7f,
+ 0x1d, 0x00,
+ 0x1e, 0x00,
+ 0x1f, 0x50,
+ 0x20, 0x00,
+ 0x21, 0x00,
+ 0x22, 0x00,
+ 0x23, 0x00,
+ 0x28, 0x00,
+ 0x29, 0x28,
+ 0x2a, 0x14,
+ 0x2b, 0x0f,
+ 0x2c, 0x09,
+ 0x2d, 0x09,
+ 0x31, 0x1f,
+ 0x32, 0x19,
+ 0x33, 0xfc,
+ 0x34, 0x93,
+ 0xff, 0xff
+};
+
+static int philips_su1278_tt_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio)
+{
+ stv0299_writereg(fe, 0x0e, 0x44);
+ if (srate >= 10000000) {
+ stv0299_writereg(fe, 0x13, 0x97);
+ stv0299_writereg(fe, 0x14, 0x95);
+ stv0299_writereg(fe, 0x15, 0xc9);
+ stv0299_writereg(fe, 0x17, 0x8c);
+ stv0299_writereg(fe, 0x1a, 0xfe);
+ stv0299_writereg(fe, 0x1c, 0x7f);
+ stv0299_writereg(fe, 0x2d, 0x09);
+ } else {
+ stv0299_writereg(fe, 0x13, 0x99);
+ stv0299_writereg(fe, 0x14, 0x8d);
+ stv0299_writereg(fe, 0x15, 0xce);
+ stv0299_writereg(fe, 0x17, 0x43);
+ stv0299_writereg(fe, 0x1a, 0x1d);
+ stv0299_writereg(fe, 0x1c, 0x12);
+ stv0299_writereg(fe, 0x2d, 0x05);
+ }
+ stv0299_writereg(fe, 0x0e, 0x23);
+ stv0299_writereg(fe, 0x0f, 0x94);
+ stv0299_writereg(fe, 0x10, 0x39);
+ stv0299_writereg(fe, 0x15, 0xc9);
+
+ stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
+ stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
+ stv0299_writereg(fe, 0x21, (ratio) & 0xf0);
+
+ return 0;
+}
+
+static int philips_su1278_tt_tuner_set_params(struct dvb_frontend *fe)
+{
+ struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+ struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv;
+ u32 div;
+ u8 buf[4];
+ struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = buf,.len = sizeof(buf) };
+
+ if ((p->frequency < 950000) || (p->frequency > 2150000))
+ return -EINVAL;
+
+ div = (p->frequency + (500 - 1)) / 500; /* round correctly */
+ buf[0] = (div >> 8) & 0x7f;
+ buf[1] = div & 0xff;
+ buf[2] = 0x80 | ((div & 0x18000) >> 10) | 2;
+ buf[3] = 0x20;
+
+ if (p->symbol_rate < 4000000)
+ buf[3] |= 1;
+
+ if (p->frequency < 1250000)
+ buf[3] |= 0;
+ else if (p->frequency < 1550000)
+ buf[3] |= 0x40;
+ else if (p->frequency < 2050000)
+ buf[3] |= 0x80;
+ else if (p->frequency < 2150000)
+ buf[3] |= 0xC0;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ if (i2c_transfer(&budget_ci->budget.i2c_adap, &msg, 1) != 1)
+ return -EIO;
+ return 0;
+}
+
+static struct stv0299_config philips_su1278_tt_config = {
+
+ .demod_address = 0x68,
+ .inittab = philips_su1278_tt_inittab,
+ .mclk = 64000000UL,
+ .invert = 0,
+ .skip_reinit = 1,
+ .lock_output = STV0299_LOCKOUTPUT_1,
+ .volt13_op0_op1 = STV0299_VOLT13_OP1,
+ .min_delay_ms = 50,
+ .set_symbol_rate = philips_su1278_tt_set_symbol_rate,
+};
+
+
+
+static int philips_tdm1316l_tuner_init(struct dvb_frontend *fe)
+{
+ struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv;
+ static u8 td1316_init[] = { 0x0b, 0xf5, 0x85, 0xab };
+ static u8 disable_mc44BC374c[] = { 0x1d, 0x74, 0xa0, 0x68 };
+ struct i2c_msg tuner_msg = {.addr = budget_ci->tuner_pll_address,.flags = 0,.buf = td1316_init,.len =
+ sizeof(td1316_init) };
+
+ // setup PLL configuration
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1)
+ return -EIO;
+ msleep(1);
+
+ // disable the mc44BC374c (do not check for errors)
+ tuner_msg.addr = 0x65;
+ tuner_msg.buf = disable_mc44BC374c;
+ tuner_msg.len = sizeof(disable_mc44BC374c);
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1) {
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1);
+ }
+
+ return 0;
+}
+
+static int philips_tdm1316l_tuner_set_params(struct dvb_frontend *fe)
+{
+ struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+ struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv;
+ u8 tuner_buf[4];
+ struct i2c_msg tuner_msg = {.addr = budget_ci->tuner_pll_address,.flags = 0,.buf = tuner_buf,.len = sizeof(tuner_buf) };
+ int tuner_frequency = 0;
+ u8 band, cp, filter;
+
+ // determine charge pump
+ tuner_frequency = p->frequency + 36130000;
+ if (tuner_frequency < 87000000)
+ return -EINVAL;
+ else if (tuner_frequency < 130000000)
+ cp = 3;
+ else if (tuner_frequency < 160000000)
+ cp = 5;
+ else if (tuner_frequency < 200000000)
+ cp = 6;
+ else if (tuner_frequency < 290000000)
+ cp = 3;
+ else if (tuner_frequency < 420000000)
+ cp = 5;
+ else if (tuner_frequency < 480000000)
+ cp = 6;
+ else if (tuner_frequency < 620000000)
+ cp = 3;
+ else if (tuner_frequency < 830000000)
+ cp = 5;
+ else if (tuner_frequency < 895000000)
+ cp = 7;
+ else
+ return -EINVAL;
+
+ // determine band
+ if (p->frequency < 49000000)
+ return -EINVAL;
+ else if (p->frequency < 159000000)
+ band = 1;
+ else if (p->frequency < 444000000)
+ band = 2;
+ else if (p->frequency < 861000000)
+ band = 4;
+ else
+ return -EINVAL;
+
+ // setup PLL filter and TDA9889
+ switch (p->bandwidth_hz) {
+ case 6000000:
+ tda1004x_writereg(fe, 0x0C, 0x14);
+ filter = 0;
+ break;
+
+ case 7000000:
+ tda1004x_writereg(fe, 0x0C, 0x80);
+ filter = 0;
+ break;
+
+ case 8000000:
+ tda1004x_writereg(fe, 0x0C, 0x14);
+ filter = 1;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ // calculate divisor
+ // ((36130000+((1000000/6)/2)) + Finput)/(1000000/6)
+ tuner_frequency = (((p->frequency / 1000) * 6) + 217280) / 1000;
+
+ // setup tuner buffer
+ tuner_buf[0] = tuner_frequency >> 8;
+ tuner_buf[1] = tuner_frequency & 0xff;
+ tuner_buf[2] = 0xca;
+ tuner_buf[3] = (cp << 5) | (filter << 3) | band;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1)
+ return -EIO;
+
+ msleep(1);
+ return 0;
+}
+
+static int philips_tdm1316l_request_firmware(struct dvb_frontend *fe,
+ const struct firmware **fw, char *name)
+{
+ struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv;
+
+ return request_firmware(fw, name, &budget_ci->budget.dev->pci->dev);
+}
+
+static struct tda1004x_config philips_tdm1316l_config = {
+
+ .demod_address = 0x8,
+ .invert = 0,
+ .invert_oclk = 0,
+ .xtal_freq = TDA10046_XTAL_4M,
+ .agc_config = TDA10046_AGC_DEFAULT,
+ .if_freq = TDA10046_FREQ_3617,
+ .request_firmware = philips_tdm1316l_request_firmware,
+};
+
+static struct tda1004x_config philips_tdm1316l_config_invert = {
+
+ .demod_address = 0x8,
+ .invert = 1,
+ .invert_oclk = 0,
+ .xtal_freq = TDA10046_XTAL_4M,
+ .agc_config = TDA10046_AGC_DEFAULT,
+ .if_freq = TDA10046_FREQ_3617,
+ .request_firmware = philips_tdm1316l_request_firmware,
+};
+
+static int dvbc_philips_tdm1316l_tuner_set_params(struct dvb_frontend *fe)
+{
+ struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+ struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv;
+ u8 tuner_buf[5];
+ struct i2c_msg tuner_msg = {.addr = budget_ci->tuner_pll_address,
+ .flags = 0,
+ .buf = tuner_buf,
+ .len = sizeof(tuner_buf) };
+ int tuner_frequency = 0;
+ u8 band, cp, filter;
+
+ // determine charge pump
+ tuner_frequency = p->frequency + 36125000;
+ if (tuner_frequency < 87000000)
+ return -EINVAL;
+ else if (tuner_frequency < 130000000) {
+ cp = 3;
+ band = 1;
+ } else if (tuner_frequency < 160000000) {
+ cp = 5;
+ band = 1;
+ } else if (tuner_frequency < 200000000) {
+ cp = 6;
+ band = 1;
+ } else if (tuner_frequency < 290000000) {
+ cp = 3;
+ band = 2;
+ } else if (tuner_frequency < 420000000) {
+ cp = 5;
+ band = 2;
+ } else if (tuner_frequency < 480000000) {
+ cp = 6;
+ band = 2;
+ } else if (tuner_frequency < 620000000) {
+ cp = 3;
+ band = 4;
+ } else if (tuner_frequency < 830000000) {
+ cp = 5;
+ band = 4;
+ } else if (tuner_frequency < 895000000) {
+ cp = 7;
+ band = 4;
+ } else
+ return -EINVAL;
+
+ // assume PLL filter should always be 8MHz for the moment.
+ filter = 1;
+
+ // calculate divisor
+ tuner_frequency = (p->frequency + 36125000 + (62500/2)) / 62500;
+
+ // setup tuner buffer
+ tuner_buf[0] = tuner_frequency >> 8;
+ tuner_buf[1] = tuner_frequency & 0xff;
+ tuner_buf[2] = 0xc8;
+ tuner_buf[3] = (cp << 5) | (filter << 3) | band;
+ tuner_buf[4] = 0x80;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1)
+ return -EIO;
+
+ msleep(50);
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1)
+ return -EIO;
+
+ msleep(1);
+
+ return 0;
+}
+
+static u8 dvbc_philips_tdm1316l_inittab[] = {
+ 0x80, 0x01,
+ 0x80, 0x00,
+ 0x81, 0x01,
+ 0x81, 0x00,
+ 0x00, 0x09,
+ 0x01, 0x69,
+ 0x03, 0x00,
+ 0x04, 0x00,
+ 0x07, 0x00,
+ 0x08, 0x00,
+ 0x20, 0x00,
+ 0x21, 0x40,
+ 0x22, 0x00,
+ 0x23, 0x00,
+ 0x24, 0x40,
+ 0x25, 0x88,
+ 0x30, 0xff,
+ 0x31, 0x00,
+ 0x32, 0xff,
+ 0x33, 0x00,
+ 0x34, 0x50,
+ 0x35, 0x7f,
+ 0x36, 0x00,
+ 0x37, 0x20,
+ 0x38, 0x00,
+ 0x40, 0x1c,
+ 0x41, 0xff,
+ 0x42, 0x29,
+ 0x43, 0x20,
+ 0x44, 0xff,
+ 0x45, 0x00,
+ 0x46, 0x00,
+ 0x49, 0x04,
+ 0x4a, 0x00,
+ 0x4b, 0x7b,
+ 0x52, 0x30,
+ 0x55, 0xae,
+ 0x56, 0x47,
+ 0x57, 0xe1,
+ 0x58, 0x3a,
+ 0x5a, 0x1e,
+ 0x5b, 0x34,
+ 0x60, 0x00,
+ 0x63, 0x00,
+ 0x64, 0x00,
+ 0x65, 0x00,
+ 0x66, 0x00,
+ 0x67, 0x00,
+ 0x68, 0x00,
+ 0x69, 0x00,
+ 0x6a, 0x02,
+ 0x6b, 0x00,
+ 0x70, 0xff,
+ 0x71, 0x00,
+ 0x72, 0x00,
+ 0x73, 0x00,
+ 0x74, 0x0c,
+ 0x80, 0x00,
+ 0x81, 0x00,
+ 0x82, 0x00,
+ 0x83, 0x00,
+ 0x84, 0x04,
+ 0x85, 0x80,
+ 0x86, 0x24,
+ 0x87, 0x78,
+ 0x88, 0x10,
+ 0x89, 0x00,
+ 0x90, 0x01,
+ 0x91, 0x01,
+ 0xa0, 0x04,
+ 0xa1, 0x00,
+ 0xa2, 0x00,
+ 0xb0, 0x91,
+ 0xb1, 0x0b,
+ 0xc0, 0x53,
+ 0xc1, 0x70,
+ 0xc2, 0x12,
+ 0xd0, 0x00,
+ 0xd1, 0x00,
+ 0xd2, 0x00,
+ 0xd3, 0x00,
+ 0xd4, 0x00,
+ 0xd5, 0x00,
+ 0xde, 0x00,
+ 0xdf, 0x00,
+ 0x61, 0x38,
+ 0x62, 0x0a,
+ 0x53, 0x13,
+ 0x59, 0x08,
+ 0xff, 0xff,
+};
+
+static struct stv0297_config dvbc_philips_tdm1316l_config = {
+ .demod_address = 0x1c,
+ .inittab = dvbc_philips_tdm1316l_inittab,
+ .invert = 0,
+ .stop_during_read = 1,
+};
+
+static struct tda10023_config tda10023_config = {
+ .demod_address = 0xc,
+ .invert = 0,
+ .xtal = 16000000,
+ .pll_m = 11,
+ .pll_p = 3,
+ .pll_n = 1,
+ .deltaf = 0xa511,
+};
+
+static struct tda827x_config tda827x_config = {
+ .config = 0,
+};
+
+/* TT S2-3200 DVB-S (STB0899) Inittab */
+static const struct stb0899_s1_reg tt3200_stb0899_s1_init_1[] = {
+
+ { STB0899_DEV_ID , 0x81 },
+ { STB0899_DISCNTRL1 , 0x32 },
+ { STB0899_DISCNTRL2 , 0x80 },
+ { STB0899_DISRX_ST0 , 0x04 },
+ { STB0899_DISRX_ST1 , 0x00 },
+ { STB0899_DISPARITY , 0x00 },
+ { STB0899_DISSTATUS , 0x20 },
+ { STB0899_DISF22 , 0x8c },
+ { STB0899_DISF22RX , 0x9a },
+ { STB0899_SYSREG , 0x0b },
+ { STB0899_ACRPRESC , 0x11 },
+ { STB0899_ACRDIV1 , 0x0a },
+ { STB0899_ACRDIV2 , 0x05 },
+ { STB0899_DACR1 , 0x00 },
+ { STB0899_DACR2 , 0x00 },
+ { STB0899_OUTCFG , 0x00 },
+ { STB0899_MODECFG , 0x00 },
+ { STB0899_IRQSTATUS_3 , 0x30 },
+ { STB0899_IRQSTATUS_2 , 0x00 },
+ { STB0899_IRQSTATUS_1 , 0x00 },
+ { STB0899_IRQSTATUS_0 , 0x00 },
+ { STB0899_IRQMSK_3 , 0xf3 },
+ { STB0899_IRQMSK_2 , 0xfc },
+ { STB0899_IRQMSK_1 , 0xff },
+ { STB0899_IRQMSK_0 , 0xff },
+ { STB0899_IRQCFG , 0x00 },
+ { STB0899_I2CCFG , 0x88 },
+ { STB0899_I2CRPT , 0x48 }, /* 12k Pullup, Repeater=16, Stop=disabled */
+ { STB0899_IOPVALUE5 , 0x00 },
+ { STB0899_IOPVALUE4 , 0x20 },
+ { STB0899_IOPVALUE3 , 0xc9 },
+ { STB0899_IOPVALUE2 , 0x90 },
+ { STB0899_IOPVALUE1 , 0x40 },
+ { STB0899_IOPVALUE0 , 0x00 },
+ { STB0899_GPIO00CFG , 0x82 },
+ { STB0899_GPIO01CFG , 0x82 },
+ { STB0899_GPIO02CFG , 0x82 },
+ { STB0899_GPIO03CFG , 0x82 },
+ { STB0899_GPIO04CFG , 0x82 },
+ { STB0899_GPIO05CFG , 0x82 },
+ { STB0899_GPIO06CFG , 0x82 },
+ { STB0899_GPIO07CFG , 0x82 },
+ { STB0899_GPIO08CFG , 0x82 },
+ { STB0899_GPIO09CFG , 0x82 },
+ { STB0899_GPIO10CFG , 0x82 },
+ { STB0899_GPIO11CFG , 0x82 },
+ { STB0899_GPIO12CFG , 0x82 },
+ { STB0899_GPIO13CFG , 0x82 },
+ { STB0899_GPIO14CFG , 0x82 },
+ { STB0899_GPIO15CFG , 0x82 },
+ { STB0899_GPIO16CFG , 0x82 },
+ { STB0899_GPIO17CFG , 0x82 },
+ { STB0899_GPIO18CFG , 0x82 },
+ { STB0899_GPIO19CFG , 0x82 },
+ { STB0899_GPIO20CFG , 0x82 },
+ { STB0899_SDATCFG , 0xb8 },
+ { STB0899_SCLTCFG , 0xba },
+ { STB0899_AGCRFCFG , 0x1c }, /* 0x11 */
+ { STB0899_GPIO22 , 0x82 }, /* AGCBB2CFG */
+ { STB0899_GPIO21 , 0x91 }, /* AGCBB1CFG */
+ { STB0899_DIRCLKCFG , 0x82 },
+ { STB0899_CLKOUT27CFG , 0x7e },
+ { STB0899_STDBYCFG , 0x82 },
+ { STB0899_CS0CFG , 0x82 },
+ { STB0899_CS1CFG , 0x82 },
+ { STB0899_DISEQCOCFG , 0x20 },
+ { STB0899_GPIO32CFG , 0x82 },
+ { STB0899_GPIO33CFG , 0x82 },
+ { STB0899_GPIO34CFG , 0x82 },
+ { STB0899_GPIO35CFG , 0x82 },
+ { STB0899_GPIO36CFG , 0x82 },
+ { STB0899_GPIO37CFG , 0x82 },
+ { STB0899_GPIO38CFG , 0x82 },
+ { STB0899_GPIO39CFG , 0x82 },
+ { STB0899_NCOARSE , 0x15 }, /* 0x15 = 27 Mhz Clock, F/3 = 198MHz, F/6 = 99MHz */
+ { STB0899_SYNTCTRL , 0x02 }, /* 0x00 = CLK from CLKI, 0x02 = CLK from XTALI */
+ { STB0899_FILTCTRL , 0x00 },
+ { STB0899_SYSCTRL , 0x00 },
+ { STB0899_STOPCLK1 , 0x20 },
+ { STB0899_STOPCLK2 , 0x00 },
+ { STB0899_INTBUFSTATUS , 0x00 },
+ { STB0899_INTBUFCTRL , 0x0a },
+ { 0xffff , 0xff },
+};
+
+static const struct stb0899_s1_reg tt3200_stb0899_s1_init_3[] = {
+ { STB0899_DEMOD , 0x00 },
+ { STB0899_RCOMPC , 0xc9 },
+ { STB0899_AGC1CN , 0x41 },
+ { STB0899_AGC1REF , 0x10 },
+ { STB0899_RTC , 0x7a },
+ { STB0899_TMGCFG , 0x4e },
+ { STB0899_AGC2REF , 0x34 },
+ { STB0899_TLSR , 0x84 },
+ { STB0899_CFD , 0xc7 },
+ { STB0899_ACLC , 0x87 },
+ { STB0899_BCLC , 0x94 },
+ { STB0899_EQON , 0x41 },
+ { STB0899_LDT , 0xdd },
+ { STB0899_LDT2 , 0xc9 },
+ { STB0899_EQUALREF , 0xb4 },
+ { STB0899_TMGRAMP , 0x10 },
+ { STB0899_TMGTHD , 0x30 },
+ { STB0899_IDCCOMP , 0xfb },
+ { STB0899_QDCCOMP , 0x03 },
+ { STB0899_POWERI , 0x3b },
+ { STB0899_POWERQ , 0x3d },
+ { STB0899_RCOMP , 0x81 },
+ { STB0899_AGCIQIN , 0x80 },
+ { STB0899_AGC2I1 , 0x04 },
+ { STB0899_AGC2I2 , 0xf5 },
+ { STB0899_TLIR , 0x25 },
+ { STB0899_RTF , 0x80 },
+ { STB0899_DSTATUS , 0x00 },
+ { STB0899_LDI , 0xca },
+ { STB0899_CFRM , 0xf1 },
+ { STB0899_CFRL , 0xf3 },
+ { STB0899_NIRM , 0x2a },
+ { STB0899_NIRL , 0x05 },
+ { STB0899_ISYMB , 0x17 },
+ { STB0899_QSYMB , 0xfa },
+ { STB0899_SFRH , 0x2f },
+ { STB0899_SFRM , 0x68 },
+ { STB0899_SFRL , 0x40 },
+ { STB0899_SFRUPH , 0x2f },
+ { STB0899_SFRUPM , 0x68 },
+ { STB0899_SFRUPL , 0x40 },
+ { STB0899_EQUAI1 , 0xfd },
+ { STB0899_EQUAQ1 , 0x04 },
+ { STB0899_EQUAI2 , 0x0f },
+ { STB0899_EQUAQ2 , 0xff },
+ { STB0899_EQUAI3 , 0xdf },
+ { STB0899_EQUAQ3 , 0xfa },
+ { STB0899_EQUAI4 , 0x37 },
+ { STB0899_EQUAQ4 , 0x0d },
+ { STB0899_EQUAI5 , 0xbd },
+ { STB0899_EQUAQ5 , 0xf7 },
+ { STB0899_DSTATUS2 , 0x00 },
+ { STB0899_VSTATUS , 0x00 },
+ { STB0899_VERROR , 0xff },
+ { STB0899_IQSWAP , 0x2a },
+ { STB0899_ECNT1M , 0x00 },
+ { STB0899_ECNT1L , 0x00 },
+ { STB0899_ECNT2M , 0x00 },
+ { STB0899_ECNT2L , 0x00 },
+ { STB0899_ECNT3M , 0x00 },
+ { STB0899_ECNT3L , 0x00 },
+ { STB0899_FECAUTO1 , 0x06 },
+ { STB0899_FECM , 0x01 },
+ { STB0899_VTH12 , 0xf0 },
+ { STB0899_VTH23 , 0xa0 },
+ { STB0899_VTH34 , 0x78 },
+ { STB0899_VTH56 , 0x4e },
+ { STB0899_VTH67 , 0x48 },
+ { STB0899_VTH78 , 0x38 },
+ { STB0899_PRVIT , 0xff },
+ { STB0899_VITSYNC , 0x19 },
+ { STB0899_RSULC , 0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */
+ { STB0899_TSULC , 0x42 },
+ { STB0899_RSLLC , 0x40 },
+ { STB0899_TSLPL , 0x12 },
+ { STB0899_TSCFGH , 0x0c },
+ { STB0899_TSCFGM , 0x00 },
+ { STB0899_TSCFGL , 0x0c },
+ { STB0899_TSOUT , 0x4d }, /* 0x0d for CAM */
+ { STB0899_RSSYNCDEL , 0x00 },
+ { STB0899_TSINHDELH , 0x02 },
+ { STB0899_TSINHDELM , 0x00 },
+ { STB0899_TSINHDELL , 0x00 },
+ { STB0899_TSLLSTKM , 0x00 },
+ { STB0899_TSLLSTKL , 0x00 },
+ { STB0899_TSULSTKM , 0x00 },
+ { STB0899_TSULSTKL , 0xab },
+ { STB0899_PCKLENUL , 0x00 },
+ { STB0899_PCKLENLL , 0xcc },
+ { STB0899_RSPCKLEN , 0xcc },
+ { STB0899_TSSTATUS , 0x80 },
+ { STB0899_ERRCTRL1 , 0xb6 },
+ { STB0899_ERRCTRL2 , 0x96 },
+ { STB0899_ERRCTRL3 , 0x89 },
+ { STB0899_DMONMSK1 , 0x27 },
+ { STB0899_DMONMSK0 , 0x03 },
+ { STB0899_DEMAPVIT , 0x5c },
+ { STB0899_PLPARM , 0x1f },
+ { STB0899_PDELCTRL , 0x48 },
+ { STB0899_PDELCTRL2 , 0x00 },
+ { STB0899_BBHCTRL1 , 0x00 },
+ { STB0899_BBHCTRL2 , 0x00 },
+ { STB0899_HYSTTHRESH , 0x77 },
+ { STB0899_MATCSTM , 0x00 },
+ { STB0899_MATCSTL , 0x00 },
+ { STB0899_UPLCSTM , 0x00 },
+ { STB0899_UPLCSTL , 0x00 },
+ { STB0899_DFLCSTM , 0x00 },
+ { STB0899_DFLCSTL , 0x00 },
+ { STB0899_SYNCCST , 0x00 },
+ { STB0899_SYNCDCSTM , 0x00 },
+ { STB0899_SYNCDCSTL , 0x00 },
+ { STB0899_ISI_ENTRY , 0x00 },
+ { STB0899_ISI_BIT_EN , 0x00 },
+ { STB0899_MATSTRM , 0x00 },
+ { STB0899_MATSTRL , 0x00 },
+ { STB0899_UPLSTRM , 0x00 },
+ { STB0899_UPLSTRL , 0x00 },
+ { STB0899_DFLSTRM , 0x00 },
+ { STB0899_DFLSTRL , 0x00 },
+ { STB0899_SYNCSTR , 0x00 },
+ { STB0899_SYNCDSTRM , 0x00 },
+ { STB0899_SYNCDSTRL , 0x00 },
+ { STB0899_CFGPDELSTATUS1 , 0x10 },
+ { STB0899_CFGPDELSTATUS2 , 0x00 },
+ { STB0899_BBFERRORM , 0x00 },
+ { STB0899_BBFERRORL , 0x00 },
+ { STB0899_UPKTERRORM , 0x00 },
+ { STB0899_UPKTERRORL , 0x00 },
+ { 0xffff , 0xff },
+};
+
+static struct stb0899_config tt3200_config = {
+ .init_dev = tt3200_stb0899_s1_init_1,
+ .init_s2_demod = stb0899_s2_init_2,
+ .init_s1_demod = tt3200_stb0899_s1_init_3,
+ .init_s2_fec = stb0899_s2_init_4,
+ .init_tst = stb0899_s1_init_5,
+
+ .postproc = NULL,
+
+ .demod_address = 0x68,
+
+ .xtal_freq = 27000000,
+ .inversion = IQ_SWAP_ON,
+
+ .lo_clk = 76500000,
+ .hi_clk = 99000000,
+
+ .esno_ave = STB0899_DVBS2_ESNO_AVE,
+ .esno_quant = STB0899_DVBS2_ESNO_QUANT,
+ .avframes_coarse = STB0899_DVBS2_AVFRAMES_COARSE,
+ .avframes_fine = STB0899_DVBS2_AVFRAMES_FINE,
+ .miss_threshold = STB0899_DVBS2_MISS_THRESHOLD,
+ .uwp_threshold_acq = STB0899_DVBS2_UWP_THRESHOLD_ACQ,
+ .uwp_threshold_track = STB0899_DVBS2_UWP_THRESHOLD_TRACK,
+ .uwp_threshold_sof = STB0899_DVBS2_UWP_THRESHOLD_SOF,
+ .sof_search_timeout = STB0899_DVBS2_SOF_SEARCH_TIMEOUT,
+
+ .btr_nco_bits = STB0899_DVBS2_BTR_NCO_BITS,
+ .btr_gain_shift_offset = STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET,
+ .crl_nco_bits = STB0899_DVBS2_CRL_NCO_BITS,
+ .ldpc_max_iter = STB0899_DVBS2_LDPC_MAX_ITER,
+
+ .tuner_get_frequency = stb6100_get_frequency,
+ .tuner_set_frequency = stb6100_set_frequency,
+ .tuner_set_bandwidth = stb6100_set_bandwidth,
+ .tuner_get_bandwidth = stb6100_get_bandwidth,
+ .tuner_set_rfsiggain = NULL
+};
+
+static struct stb6100_config tt3200_stb6100_config = {
+ .tuner_address = 0x60,
+ .refclock = 27000000,
+};
+
+static void frontend_init(struct budget_ci *budget_ci)
+{
+ switch (budget_ci->budget.dev->pci->subsystem_device) {
+ case 0x100c: // Hauppauge/TT Nova-CI budget (stv0299/ALPS BSRU6(tsa5059))
+ budget_ci->budget.dvb_frontend =
+ dvb_attach(stv0299_attach, &alps_bsru6_config, &budget_ci->budget.i2c_adap);
+ if (budget_ci->budget.dvb_frontend) {
+ budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params;
+ budget_ci->budget.dvb_frontend->tuner_priv = &budget_ci->budget.i2c_adap;
+ break;
+ }
+ break;
+
+ case 0x100f: // Hauppauge/TT Nova-CI budget (stv0299b/Philips su1278(tsa5059))
+ budget_ci->budget.dvb_frontend =
+ dvb_attach(stv0299_attach, &philips_su1278_tt_config, &budget_ci->budget.i2c_adap);
+ if (budget_ci->budget.dvb_frontend) {
+ budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = philips_su1278_tt_tuner_set_params;
+ break;
+ }
+ break;
+
+ case 0x1010: // TT DVB-C CI budget (stv0297/Philips tdm1316l(tda6651tt))
+ budget_ci->tuner_pll_address = 0x61;
+ budget_ci->budget.dvb_frontend =
+ dvb_attach(stv0297_attach, &dvbc_philips_tdm1316l_config, &budget_ci->budget.i2c_adap);
+ if (budget_ci->budget.dvb_frontend) {
+ budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = dvbc_philips_tdm1316l_tuner_set_params;
+ break;
+ }
+ break;
+
+ case 0x1011: // Hauppauge/TT Nova-T budget (tda10045/Philips tdm1316l(tda6651tt) + TDA9889)
+ budget_ci->tuner_pll_address = 0x63;
+ budget_ci->budget.dvb_frontend =
+ dvb_attach(tda10045_attach, &philips_tdm1316l_config, &budget_ci->budget.i2c_adap);
+ if (budget_ci->budget.dvb_frontend) {
+ budget_ci->budget.dvb_frontend->ops.tuner_ops.init = philips_tdm1316l_tuner_init;
+ budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = philips_tdm1316l_tuner_set_params;
+ break;
+ }
+ break;
+
+ case 0x1012: // TT DVB-T CI budget (tda10046/Philips tdm1316l(tda6651tt))
+ budget_ci->tuner_pll_address = 0x60;
+ budget_ci->budget.dvb_frontend =
+ dvb_attach(tda10046_attach, &philips_tdm1316l_config_invert, &budget_ci->budget.i2c_adap);
+ if (budget_ci->budget.dvb_frontend) {
+ budget_ci->budget.dvb_frontend->ops.tuner_ops.init = philips_tdm1316l_tuner_init;
+ budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = philips_tdm1316l_tuner_set_params;
+ break;
+ }
+ break;
+
+ case 0x1017: // TT S-1500 PCI
+ budget_ci->budget.dvb_frontend = dvb_attach(stv0299_attach, &alps_bsbe1_config, &budget_ci->budget.i2c_adap);
+ if (budget_ci->budget.dvb_frontend) {
+ budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = alps_bsbe1_tuner_set_params;
+ budget_ci->budget.dvb_frontend->tuner_priv = &budget_ci->budget.i2c_adap;
+
+ budget_ci->budget.dvb_frontend->ops.dishnetwork_send_legacy_command = NULL;
+ if (dvb_attach(lnbp21_attach, budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, LNBP21_LLC, 0) == NULL) {
+ printk("%s: No LNBP21 found!\n", __func__);
+ dvb_frontend_detach(budget_ci->budget.dvb_frontend);
+ budget_ci->budget.dvb_frontend = NULL;
+ }
+ }
+ break;
+
+ case 0x101a: /* TT Budget-C-1501 (philips tda10023/philips tda8274A) */
+ budget_ci->budget.dvb_frontend = dvb_attach(tda10023_attach, &tda10023_config, &budget_ci->budget.i2c_adap, 0x48);
+ if (budget_ci->budget.dvb_frontend) {
+ if (dvb_attach(tda827x_attach, budget_ci->budget.dvb_frontend, 0x61, &budget_ci->budget.i2c_adap, &tda827x_config) == NULL) {
+ printk(KERN_ERR "%s: No tda827x found!\n", __func__);
+ dvb_frontend_detach(budget_ci->budget.dvb_frontend);
+ budget_ci->budget.dvb_frontend = NULL;
+ }
+ }
+ break;
+
+ case 0x101b: /* TT S-1500B (BSBE1-D01A - STV0288/STB6000/LNBP21) */
+ budget_ci->budget.dvb_frontend = dvb_attach(stv0288_attach, &stv0288_bsbe1_d01a_config, &budget_ci->budget.i2c_adap);
+ if (budget_ci->budget.dvb_frontend) {
+ if (dvb_attach(stb6000_attach, budget_ci->budget.dvb_frontend, 0x63, &budget_ci->budget.i2c_adap)) {
+ if (!dvb_attach(lnbp21_attach, budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, 0, 0)) {
+ printk(KERN_ERR "%s: No LNBP21 found!\n", __func__);
+ dvb_frontend_detach(budget_ci->budget.dvb_frontend);
+ budget_ci->budget.dvb_frontend = NULL;
+ }
+ } else {
+ printk(KERN_ERR "%s: No STB6000 found!\n", __func__);
+ dvb_frontend_detach(budget_ci->budget.dvb_frontend);
+ budget_ci->budget.dvb_frontend = NULL;
+ }
+ }
+ break;
+
+ case 0x1019: // TT S2-3200 PCI
+ /*
+ * NOTE! on some STB0899 versions, the internal PLL takes a longer time
+ * to settle, aka LOCK. On the older revisions of the chip, we don't see
+ * this, as a result on the newer chips the entire clock tree, will not
+ * be stable after a freshly POWER 'ed up situation.
+ * In this case, we should RESET the STB0899 (Active LOW) and wait for
+ * PLL stabilization.
+ *
+ * On the TT S2 3200 and clones, the STB0899 demodulator's RESETB is
+ * connected to the SAA7146 GPIO, GPIO2, Pin 142
+ */
+ /* Reset Demodulator */
+ saa7146_setgpio(budget_ci->budget.dev, 2, SAA7146_GPIO_OUTLO);
+ /* Wait for everything to die */
+ msleep(50);
+ /* Pull it up out of Reset state */
+ saa7146_setgpio(budget_ci->budget.dev, 2, SAA7146_GPIO_OUTHI);
+ /* Wait for PLL to stabilize */
+ msleep(250);
+ /*
+ * PLL state should be stable now. Ideally, we should check
+ * for PLL LOCK status. But well, never mind!
+ */
+ budget_ci->budget.dvb_frontend = dvb_attach(stb0899_attach, &tt3200_config, &budget_ci->budget.i2c_adap);
+ if (budget_ci->budget.dvb_frontend) {
+ if (dvb_attach(stb6100_attach, budget_ci->budget.dvb_frontend, &tt3200_stb6100_config, &budget_ci->budget.i2c_adap)) {
+ if (!dvb_attach(lnbp21_attach, budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, 0, 0)) {
+ printk("%s: No LNBP21 found!\n", __func__);
+ dvb_frontend_detach(budget_ci->budget.dvb_frontend);
+ budget_ci->budget.dvb_frontend = NULL;
+ }
+ } else {
+ dvb_frontend_detach(budget_ci->budget.dvb_frontend);
+ budget_ci->budget.dvb_frontend = NULL;
+ }
+ }
+ break;
+
+ }
+
+ if (budget_ci->budget.dvb_frontend == NULL) {
+ printk("budget-ci: A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n",
+ budget_ci->budget.dev->pci->vendor,
+ budget_ci->budget.dev->pci->device,
+ budget_ci->budget.dev->pci->subsystem_vendor,
+ budget_ci->budget.dev->pci->subsystem_device);
+ } else {
+ if (dvb_register_frontend
+ (&budget_ci->budget.dvb_adapter, budget_ci->budget.dvb_frontend)) {
+ printk("budget-ci: Frontend registration failed!\n");
+ dvb_frontend_detach(budget_ci->budget.dvb_frontend);
+ budget_ci->budget.dvb_frontend = NULL;
+ }
+ }
+}
+
+static int budget_ci_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info)
+{
+ struct budget_ci *budget_ci;
+ int err;
+
+ budget_ci = kzalloc(sizeof(struct budget_ci), GFP_KERNEL);
+ if (!budget_ci) {
+ err = -ENOMEM;
+ goto out1;
+ }
+
+ dprintk(2, "budget_ci: %p\n", budget_ci);
+
+ dev->ext_priv = budget_ci;
+
+ err = ttpci_budget_init(&budget_ci->budget, dev, info, THIS_MODULE,
+ adapter_nr);
+ if (err)
+ goto out2;
+
+ err = msp430_ir_init(budget_ci);
+ if (err)
+ goto out3;
+
+ ciintf_init(budget_ci);
+
+ budget_ci->budget.dvb_adapter.priv = budget_ci;
+ frontend_init(budget_ci);
+
+ ttpci_budget_init_hooks(&budget_ci->budget);
+
+ return 0;
+
+out3:
+ ttpci_budget_deinit(&budget_ci->budget);
+out2:
+ kfree(budget_ci);
+out1:
+ return err;
+}
+
+static int budget_ci_detach(struct saa7146_dev *dev)
+{
+ struct budget_ci *budget_ci = (struct budget_ci *) dev->ext_priv;
+ struct saa7146_dev *saa = budget_ci->budget.dev;
+ int err;
+
+ if (budget_ci->budget.ci_present)
+ ciintf_deinit(budget_ci);
+ msp430_ir_deinit(budget_ci);
+ if (budget_ci->budget.dvb_frontend) {
+ dvb_unregister_frontend(budget_ci->budget.dvb_frontend);
+ dvb_frontend_detach(budget_ci->budget.dvb_frontend);
+ }
+ err = ttpci_budget_deinit(&budget_ci->budget);
+
+ // disable frontend and CI interface
+ saa7146_setgpio(saa, 2, SAA7146_GPIO_INPUT);
+
+ kfree(budget_ci);
+
+ return err;
+}
+
+static struct saa7146_extension budget_extension;
+
+MAKE_BUDGET_INFO(ttbs2, "TT-Budget/S-1500 PCI", BUDGET_TT);
+MAKE_BUDGET_INFO(ttbci, "TT-Budget/WinTV-NOVA-CI PCI", BUDGET_TT_HW_DISEQC);
+MAKE_BUDGET_INFO(ttbt2, "TT-Budget/WinTV-NOVA-T PCI", BUDGET_TT);
+MAKE_BUDGET_INFO(ttbtci, "TT-Budget-T-CI PCI", BUDGET_TT);
+MAKE_BUDGET_INFO(ttbcci, "TT-Budget-C-CI PCI", BUDGET_TT);
+MAKE_BUDGET_INFO(ttc1501, "TT-Budget C-1501 PCI", BUDGET_TT);
+MAKE_BUDGET_INFO(tt3200, "TT-Budget S2-3200 PCI", BUDGET_TT);
+MAKE_BUDGET_INFO(ttbs1500b, "TT-Budget S-1500B PCI", BUDGET_TT);
+
+static struct pci_device_id pci_tbl[] = {
+ MAKE_EXTENSION_PCI(ttbci, 0x13c2, 0x100c),
+ MAKE_EXTENSION_PCI(ttbci, 0x13c2, 0x100f),
+ MAKE_EXTENSION_PCI(ttbcci, 0x13c2, 0x1010),
+ MAKE_EXTENSION_PCI(ttbt2, 0x13c2, 0x1011),
+ MAKE_EXTENSION_PCI(ttbtci, 0x13c2, 0x1012),
+ MAKE_EXTENSION_PCI(ttbs2, 0x13c2, 0x1017),
+ MAKE_EXTENSION_PCI(ttc1501, 0x13c2, 0x101a),
+ MAKE_EXTENSION_PCI(tt3200, 0x13c2, 0x1019),
+ MAKE_EXTENSION_PCI(ttbs1500b, 0x13c2, 0x101b),
+ {
+ .vendor = 0,
+ }
+};
+
+MODULE_DEVICE_TABLE(pci, pci_tbl);
+
+static struct saa7146_extension budget_extension = {
+ .name = "budget_ci dvb",
+ .flags = SAA7146_USE_I2C_IRQ,
+
+ .module = THIS_MODULE,
+ .pci_tbl = &pci_tbl[0],
+ .attach = budget_ci_attach,
+ .detach = budget_ci_detach,
+
+ .irq_mask = MASK_03 | MASK_06 | MASK_10,
+ .irq_func = budget_ci_irq,
+};
+
+static int __init budget_ci_init(void)
+{
+ return saa7146_register_extension(&budget_extension);
+}
+
+static void __exit budget_ci_exit(void)
+{
+ saa7146_unregister_extension(&budget_extension);
+}
+
+module_init(budget_ci_init);
+module_exit(budget_ci_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Michael Hunold, Jack Thomasson, Andrew de Quincey, others");
+MODULE_DESCRIPTION("driver for the SAA7146 based so-called "
+ "budget PCI DVB cards w/ CI-module produced by "
+ "Siemens, Technotrend, Hauppauge");
Code Review / kvmfornfv.git / blobdiff