--- /dev/null
+/*
+ * Earthsoft PT3 driver
+ *
+ * Copyright (C) 2014 Akihiro Tsukada <tskd08@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef PT3_H
+#define PT3_H
+
+#include <linux/atomic.h>
+#include <linux/types.h>
+
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dmxdev.h"
+
+#include "tc90522.h"
+#include "mxl301rf.h"
+#include "qm1d1c0042.h"
+
+#define DRV_NAME KBUILD_MODNAME
+
+#define PT3_NUM_FE 4
+
+/*
+ * register index of the FPGA chip
+ */
+#define REG_VERSION 0x00
+#define REG_BUS 0x04
+#define REG_SYSTEM_W 0x08
+#define REG_SYSTEM_R 0x0c
+#define REG_I2C_W 0x10
+#define REG_I2C_R 0x14
+#define REG_RAM_W 0x18
+#define REG_RAM_R 0x1c
+#define REG_DMA_BASE 0x40 /* regs for FE[i] = REG_DMA_BASE + 0x18 * i */
+#define OFST_DMA_DESC_L 0x00
+#define OFST_DMA_DESC_H 0x04
+#define OFST_DMA_CTL 0x08
+#define OFST_TS_CTL 0x0c
+#define OFST_STATUS 0x10
+#define OFST_TS_ERR 0x14
+
+/*
+ * internal buffer for I2C
+ */
+#define PT3_I2C_MAX 4091
+struct pt3_i2cbuf {
+ u8 data[PT3_I2C_MAX];
+ u8 tmp;
+ u32 num_cmds;
+};
+
+/*
+ * DMA things
+ */
+#define TS_PACKET_SZ 188
+/* DMA transfers must not cross 4GiB, so use one page / transfer */
+#define DATA_XFER_SZ 4096
+#define DATA_BUF_XFERS 47
+/* (num_bufs * DATA_BUF_SZ) % TS_PACKET_SZ must be 0 */
+#define DATA_BUF_SZ (DATA_BUF_XFERS * DATA_XFER_SZ)
+#define MAX_DATA_BUFS 16
+#define MIN_DATA_BUFS 2
+
+#define DESCS_IN_PAGE (PAGE_SIZE / sizeof(struct xfer_desc))
+#define MAX_NUM_XFERS (MAX_DATA_BUFS * DATA_BUF_XFERS)
+#define MAX_DESC_BUFS DIV_ROUND_UP(MAX_NUM_XFERS, DESCS_IN_PAGE)
+
+/* DMA transfer description.
+ * device is passed a pointer to this struct, dma-reads it,
+ * and gets the DMA buffer ring for storing TS data.
+ */
+struct xfer_desc {
+ u32 addr_l; /* bus address of target data buffer */
+ u32 addr_h;
+ u32 size;
+ u32 next_l; /* bus adddress of the next xfer_desc */
+ u32 next_h;
+};
+
+/* A DMA mapping of a page containing xfer_desc's */
+struct xfer_desc_buffer {
+ dma_addr_t b_addr;
+ struct xfer_desc *descs; /* PAGE_SIZE (xfer_desc[DESCS_IN_PAGE]) */
+};
+
+/* A DMA mapping of a data buffer */
+struct dma_data_buffer {
+ dma_addr_t b_addr;
+ u8 *data; /* size: u8[PAGE_SIZE] */
+};
+
+/*
+ * device things
+ */
+struct pt3_adap_config {
+ struct i2c_board_info demod_info;
+ struct tc90522_config demod_cfg;
+
+ struct i2c_board_info tuner_info;
+ union tuner_config {
+ struct qm1d1c0042_config qm1d1c0042;
+ struct mxl301rf_config mxl301rf;
+ } tuner_cfg;
+ u32 init_freq;
+};
+
+struct pt3_adapter {
+ struct dvb_adapter dvb_adap; /* dvb_adap.priv => struct pt3_board */
+ int adap_idx;
+
+ struct dvb_demux demux;
+ struct dmxdev dmxdev;
+ struct dvb_frontend *fe;
+ struct i2c_client *i2c_demod;
+ struct i2c_client *i2c_tuner;
+
+ /* data fetch thread */
+ struct task_struct *thread;
+ int num_feeds;
+
+ bool cur_lna;
+ bool cur_lnb; /* current LNB power status (on/off) */
+
+ /* items below are for DMA */
+ struct dma_data_buffer buffer[MAX_DATA_BUFS];
+ int buf_idx;
+ int buf_ofs;
+ int num_bufs; /* == pt3_board->num_bufs */
+ int num_discard; /* how many access units to discard initially */
+
+ struct xfer_desc_buffer desc_buf[MAX_DESC_BUFS];
+ int num_desc_bufs; /* == num_bufs * DATA_BUF_XFERS / DESCS_IN_PAGE */
+};
+
+
+struct pt3_board {
+ struct pci_dev *pdev;
+ void __iomem *regs[2];
+ /* regs[0]: registers, regs[1]: internal memory, used for I2C */
+
+ struct mutex lock;
+
+ /* LNB power shared among sat-FEs */
+ int lnb_on_cnt; /* LNB power on count */
+
+ /* LNA shared among terr-FEs */
+ int lna_on_cnt; /* booster enabled count */
+
+ int num_bufs; /* number of DMA buffers allocated/mapped per FE */
+
+ struct i2c_adapter i2c_adap;
+ struct pt3_i2cbuf *i2c_buf;
+
+ struct pt3_adapter *adaps[PT3_NUM_FE];
+};
+
+
+/*
+ * prototypes
+ */
+extern int pt3_alloc_dmabuf(struct pt3_adapter *adap);
+extern void pt3_init_dmabuf(struct pt3_adapter *adap);
+extern void pt3_free_dmabuf(struct pt3_adapter *adap);
+extern int pt3_start_dma(struct pt3_adapter *adap);
+extern int pt3_stop_dma(struct pt3_adapter *adap);
+extern int pt3_proc_dma(struct pt3_adapter *adap);
+
+extern int pt3_i2c_master_xfer(struct i2c_adapter *adap,
+ struct i2c_msg *msgs, int num);
+extern u32 pt3_i2c_functionality(struct i2c_adapter *adap);
+extern void pt3_i2c_reset(struct pt3_board *pt3);
+extern int pt3_init_all_demods(struct pt3_board *pt3);
+extern int pt3_init_all_mxl301rf(struct pt3_board *pt3);
+#endif /* PT3_H */
Code Review / kvmfornfv.git / blobdiff