--- /dev/null
+/*
+
+ bttv-cards.c
+
+ this file has configuration informations - card-specific stuff
+ like the big tvcards array for the most part
+
+ Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de)
+ & Marcus Metzler (mocm@thp.uni-koeln.de)
+ (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/kmod.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/vmalloc.h>
+#include <linux/firmware.h>
+#include <net/checksum.h>
+
+#include <asm/unaligned.h>
+#include <asm/io.h>
+
+#include "bttvp.h"
+#include <media/v4l2-common.h>
+#include <media/tvaudio.h>
+#include "bttv-audio-hook.h"
+
+/* fwd decl */
+static void boot_msp34xx(struct bttv *btv, int pin);
+static void hauppauge_eeprom(struct bttv *btv);
+static void avermedia_eeprom(struct bttv *btv);
+static void osprey_eeprom(struct bttv *btv, const u8 ee[256]);
+static void modtec_eeprom(struct bttv *btv);
+static void init_PXC200(struct bttv *btv);
+static void init_RTV24(struct bttv *btv);
+static void init_PCI8604PW(struct bttv *btv);
+
+static void rv605_muxsel(struct bttv *btv, unsigned int input);
+static void eagle_muxsel(struct bttv *btv, unsigned int input);
+static void xguard_muxsel(struct bttv *btv, unsigned int input);
+static void ivc120_muxsel(struct bttv *btv, unsigned int input);
+static void gvc1100_muxsel(struct bttv *btv, unsigned int input);
+
+static void PXC200_muxsel(struct bttv *btv, unsigned int input);
+
+static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
+static void picolo_tetra_init(struct bttv *btv);
+
+static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
+static void tibetCS16_init(struct bttv *btv);
+
+static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input);
+static void kodicom4400r_init(struct bttv *btv);
+
+static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
+static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);
+
+static void geovision_muxsel(struct bttv *btv, unsigned int input);
+
+static void phytec_muxsel(struct bttv *btv, unsigned int input);
+
+static void gv800s_muxsel(struct bttv *btv, unsigned int input);
+static void gv800s_init(struct bttv *btv);
+
+static void td3116_muxsel(struct bttv *btv, unsigned int input);
+
+static int terratec_active_radio_upgrade(struct bttv *btv);
+static int tea575x_init(struct bttv *btv);
+static void identify_by_eeprom(struct bttv *btv,
+ unsigned char eeprom_data[256]);
+static int pvr_boot(struct bttv *btv);
+
+/* config variables */
+static unsigned int triton1;
+static unsigned int vsfx;
+static unsigned int latency = UNSET;
+int no_overlay=-1;
+
+static unsigned int card[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
+static unsigned int pll[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
+static unsigned int tuner[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
+static unsigned int svhs[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
+static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
+static unsigned int audiodev[BTTV_MAX];
+static unsigned int saa6588[BTTV_MAX];
+static struct bttv *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
+static unsigned int autoload = UNSET;
+static unsigned int gpiomask = UNSET;
+static unsigned int audioall = UNSET;
+static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
+
+/* insmod options */
+module_param(triton1, int, 0444);
+module_param(vsfx, int, 0444);
+module_param(no_overlay, int, 0444);
+module_param(latency, int, 0444);
+module_param(gpiomask, int, 0444);
+module_param(audioall, int, 0444);
+module_param(autoload, int, 0444);
+
+module_param_array(card, int, NULL, 0444);
+module_param_array(pll, int, NULL, 0444);
+module_param_array(tuner, int, NULL, 0444);
+module_param_array(svhs, int, NULL, 0444);
+module_param_array(remote, int, NULL, 0444);
+module_param_array(audiodev, int, NULL, 0444);
+module_param_array(audiomux, int, NULL, 0444);
+
+MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
+ "[enable bug compatibility for triton1 + others]");
+MODULE_PARM_DESC(vsfx,"set VSFX pci config bit "
+ "[yet another chipset flaw workaround]");
+MODULE_PARM_DESC(latency,"pci latency timer");
+MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
+MODULE_PARM_DESC(pll, "specify installed crystal (0=none, 28=28 MHz, 35=35 MHz, 14=14 MHz)");
+MODULE_PARM_DESC(tuner,"specify installed tuner type");
+MODULE_PARM_DESC(autoload, "obsolete option, please do not use anymore");
+MODULE_PARM_DESC(audiodev, "specify audio device:\n"
+ "\t\t-1 = no audio\n"
+ "\t\t 0 = autodetect (default)\n"
+ "\t\t 1 = msp3400\n"
+ "\t\t 2 = tda7432\n"
+ "\t\t 3 = tvaudio");
+MODULE_PARM_DESC(saa6588, "if 1, then load the saa6588 RDS module, default (0) is to use the card definition.");
+MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)"
+ " [some VIA/SIS chipsets are known to have problem with overlay]");
+
+/* ----------------------------------------------------------------------- */
+/* list of card IDs for bt878+ cards */
+
+static struct CARD {
+ unsigned id;
+ int cardnr;
+ char *name;
+} cards[] = {
+ { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV" },
+ { 0x39000070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV-D" },
+ { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR, "Hauppauge WinTV/PVR" },
+ { 0xff000070, BTTV_BOARD_OSPREY1x0, "Osprey-100" },
+ { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" },
+ { 0xff020070, BTTV_BOARD_OSPREY500, "Osprey-500" },
+ { 0xff030070, BTTV_BOARD_OSPREY2000, "Osprey-2000" },
+ { 0xff040070, BTTV_BOARD_OSPREY540, "Osprey-540" },
+ { 0xff070070, BTTV_BOARD_OSPREY440, "Osprey-440" },
+
+ { 0x00011002, BTTV_BOARD_ATI_TVWONDER, "ATI TV Wonder" },
+ { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
+
+ { 0x6606107d, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
+ { 0x6607107d, BTTV_BOARD_WINFASTVC100, "Leadtek WinFast VC 100" },
+ { 0x6609107d, BTTV_BOARD_WINFAST2000, "Leadtek TV 2000 XP" },
+ { 0x263610b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
+ { 0x264510b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
+ { 0x402010fc, BTTV_BOARD_GVBCTV3PCI, "I-O Data Co. GV-BCTV3/PCI" },
+ { 0x405010fc, BTTV_BOARD_GVBCTV4PCI, "I-O Data Co. GV-BCTV4/PCI" },
+ { 0x407010fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
+ { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
+
+ { 0x001211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" },
+ /* some cards ship with byteswapped IDs ... */
+ { 0x1200bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" },
+ { 0xff00bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" },
+ /* this seems to happen as well ... */
+ { 0xff1211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" },
+
+ { 0x3000121a, BTTV_BOARD_VOODOOTV_200, "3Dfx VoodooTV 200" },
+ { 0x263710b4, BTTV_BOARD_VOODOOTV_FM, "3Dfx VoodooTV FM" },
+ { 0x3060121a, BTTV_BOARD_STB2, "3Dfx VoodooTV 100/ STB OEM" },
+
+ { 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
+ { 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" },
+ { 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
+ { 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
+ { 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" },
+ { 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" },
+ { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" },
+
+ { 0x00011461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" },
+ { 0x00021461, BTTV_BOARD_AVERMEDIA98, "AVermedia TVCapture 98" },
+ { 0x00031461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" },
+ { 0x00041461, BTTV_BOARD_AVERMEDIA98, "AVerMedia TVCapture 98" },
+ { 0x03001461, BTTV_BOARD_AVERMEDIA98, "VDOMATE TV TUNER CARD" },
+
+ { 0x1117153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL B/G)" },
+ { 0x1118153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL B/G)" },
+ { 0x1119153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL I)" },
+ { 0x111a153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL I)" },
+
+ { 0x1123153b, BTTV_BOARD_TERRATVRADIO, "Terratec TV Radio+" },
+ { 0x1127153b, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.05)" },
+ /* clashes with FlyVideo
+ *{ 0x18521852, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.10)" }, */
+ { 0x1134153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (LR102)" },
+ { 0x1135153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* LR102 */
+ { 0x5018153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue" }, /* ?? */
+ { 0xff3b153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* ?? */
+
+ { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
+ { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
+ { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
+ { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
+ { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
+
+ { 0x1430aa00, BTTV_BOARD_PV143, "Provideo PV143A" },
+ { 0x1431aa00, BTTV_BOARD_PV143, "Provideo PV143B" },
+ { 0x1432aa00, BTTV_BOARD_PV143, "Provideo PV143C" },
+ { 0x1433aa00, BTTV_BOARD_PV143, "Provideo PV143D" },
+ { 0x1433aa03, BTTV_BOARD_PV143, "Security Eyes" },
+
+ { 0x1460aa00, BTTV_BOARD_PV150, "Provideo PV150A-1" },
+ { 0x1461aa01, BTTV_BOARD_PV150, "Provideo PV150A-2" },
+ { 0x1462aa02, BTTV_BOARD_PV150, "Provideo PV150A-3" },
+ { 0x1463aa03, BTTV_BOARD_PV150, "Provideo PV150A-4" },
+
+ { 0x1464aa04, BTTV_BOARD_PV150, "Provideo PV150B-1" },
+ { 0x1465aa05, BTTV_BOARD_PV150, "Provideo PV150B-2" },
+ { 0x1466aa06, BTTV_BOARD_PV150, "Provideo PV150B-3" },
+ { 0x1467aa07, BTTV_BOARD_PV150, "Provideo PV150B-4" },
+
+ { 0xa132ff00, BTTV_BOARD_IVC100, "IVC-100" },
+ { 0xa1550000, BTTV_BOARD_IVC200, "IVC-200" },
+ { 0xa1550001, BTTV_BOARD_IVC200, "IVC-200" },
+ { 0xa1550002, BTTV_BOARD_IVC200, "IVC-200" },
+ { 0xa1550003, BTTV_BOARD_IVC200, "IVC-200" },
+ { 0xa1550100, BTTV_BOARD_IVC200, "IVC-200G" },
+ { 0xa1550101, BTTV_BOARD_IVC200, "IVC-200G" },
+ { 0xa1550102, BTTV_BOARD_IVC200, "IVC-200G" },
+ { 0xa1550103, BTTV_BOARD_IVC200, "IVC-200G" },
+ { 0xa1550800, BTTV_BOARD_IVC200, "IVC-200" },
+ { 0xa1550801, BTTV_BOARD_IVC200, "IVC-200" },
+ { 0xa1550802, BTTV_BOARD_IVC200, "IVC-200" },
+ { 0xa1550803, BTTV_BOARD_IVC200, "IVC-200" },
+ { 0xa182ff00, BTTV_BOARD_IVC120, "IVC-120G" },
+ { 0xa182ff01, BTTV_BOARD_IVC120, "IVC-120G" },
+ { 0xa182ff02, BTTV_BOARD_IVC120, "IVC-120G" },
+ { 0xa182ff03, BTTV_BOARD_IVC120, "IVC-120G" },
+ { 0xa182ff04, BTTV_BOARD_IVC120, "IVC-120G" },
+ { 0xa182ff05, BTTV_BOARD_IVC120, "IVC-120G" },
+ { 0xa182ff06, BTTV_BOARD_IVC120, "IVC-120G" },
+ { 0xa182ff07, BTTV_BOARD_IVC120, "IVC-120G" },
+ { 0xa182ff08, BTTV_BOARD_IVC120, "IVC-120G" },
+ { 0xa182ff09, BTTV_BOARD_IVC120, "IVC-120G" },
+ { 0xa182ff0a, BTTV_BOARD_IVC120, "IVC-120G" },
+ { 0xa182ff0b, BTTV_BOARD_IVC120, "IVC-120G" },
+ { 0xa182ff0c, BTTV_BOARD_IVC120, "IVC-120G" },
+ { 0xa182ff0d, BTTV_BOARD_IVC120, "IVC-120G" },
+ { 0xa182ff0e, BTTV_BOARD_IVC120, "IVC-120G" },
+ { 0xa182ff0f, BTTV_BOARD_IVC120, "IVC-120G" },
+ { 0xf0500000, BTTV_BOARD_IVCE8784, "IVCE-8784" },
+ { 0xf0500001, BTTV_BOARD_IVCE8784, "IVCE-8784" },
+ { 0xf0500002, BTTV_BOARD_IVCE8784, "IVCE-8784" },
+ { 0xf0500003, BTTV_BOARD_IVCE8784, "IVCE-8784" },
+
+ { 0x41424344, BTTV_BOARD_GRANDTEC, "GrandTec Multi Capture" },
+ { 0x01020304, BTTV_BOARD_XGUARD, "Grandtec Grand X-Guard" },
+
+ { 0x18501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
+ { 0xa0501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
+ { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ, "FlyVideo 98EZ (LR51)/ CyberMail AV" },
+ { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
+ { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
+ { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98, "Lifeview Flyvideo 98" },
+
+ { 0x010115cb, BTTV_BOARD_GMV1, "AG GMV1" },
+ { 0x010114c7, BTTV_BOARD_MODTEC_205, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
+
+ { 0x10b42636, BTTV_BOARD_HAUPPAUGE878, "STB ???" },
+ { 0x217d6606, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
+ { 0xfff6f6ff, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
+ { 0x03116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 311" },
+ { 0x06116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 611" },
+ { 0x00790e11, BTTV_BOARD_WINDVR, "Canopus WinDVR PCI" },
+ { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX, "Face to Face Tvmax" },
+ { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" },
+ { 0x146caa0c, BTTV_BOARD_PV951, "ituner spectra8" },
+ { 0x200a1295, BTTV_BOARD_PXC200, "ImageNation PXC200A" },
+
+ { 0x40111554, BTTV_BOARD_PV_BT878P_9B, "Prolink Pixelview PV-BT" },
+ { 0x17de0a01, BTTV_BOARD_KWORLD, "Mecer TV/FM/Video Tuner" },
+
+ { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
+ { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
+ { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
+ { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
+
+ { 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" },
+
+ { 0x53534149, BTTV_BOARD_SSAI_SECURITY, "SSAI Security Video Interface" },
+ { 0x5353414a, BTTV_BOARD_SSAI_ULTRASOUND, "SSAI Ultrasound Video Interface" },
+
+ /* likely broken, vendor id doesn't match the other magic views ...
+ * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
+
+ /* Duplicate PCI ID, reconfigure for this board during the eeprom read.
+ * { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB, "Hauppauge ImpactVCB" }, */
+
+ { 0x109e036e, BTTV_BOARD_CONCEPTRONIC_CTVFMI2, "Conceptronic CTVFMi v2"},
+
+ /* DVB cards (using pci function .1 for mpeg data xfer) */
+ { 0x001c11bd, BTTV_BOARD_PINNACLESAT, "Pinnacle PCTV Sat" },
+ { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
+ { 0x20007063, BTTV_BOARD_PC_HDTV, "pcHDTV HD-2000 TV"},
+ { 0x002611bd, BTTV_BOARD_TWINHAN_DST, "Pinnacle PCTV SAT CI" },
+ { 0x00011822, BTTV_BOARD_TWINHAN_DST, "Twinhan VisionPlus DVB" },
+ { 0xfc00270f, BTTV_BOARD_TWINHAN_DST, "ChainTech digitop DST-1000 DVB-S" },
+ { 0x07711461, BTTV_BOARD_AVDVBT_771, "AVermedia AverTV DVB-T 771" },
+ { 0x07611461, BTTV_BOARD_AVDVBT_761, "AverMedia AverTV DVB-T 761" },
+ { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE, "DViCO FusionHDTV DVB-T Lite" },
+ { 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE, "Ultraview DVB-T Lite" },
+ { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE, "DViCO FusionHDTV 5 Lite" },
+ { 0x00261822, BTTV_BOARD_TWINHAN_DST, "DNTV Live! Mini "},
+ { 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2, "DViCO FusionHDTV 2" },
+ { 0x763c008a, BTTV_BOARD_GEOVISION_GV600, "GeoVision GV-600" },
+ { 0x18011000, BTTV_BOARD_ENLTV_FM_2, "Encore ENL TV-FM-2" },
+ { 0x763d800a, BTTV_BOARD_GEOVISION_GV800S, "GeoVision GV-800(S) (master)" },
+ { 0x763d800b, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
+ { 0x763d800c, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
+ { 0x763d800d, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
+
+ { 0x15401830, BTTV_BOARD_PV183, "Provideo PV183-1" },
+ { 0x15401831, BTTV_BOARD_PV183, "Provideo PV183-2" },
+ { 0x15401832, BTTV_BOARD_PV183, "Provideo PV183-3" },
+ { 0x15401833, BTTV_BOARD_PV183, "Provideo PV183-4" },
+ { 0x15401834, BTTV_BOARD_PV183, "Provideo PV183-5" },
+ { 0x15401835, BTTV_BOARD_PV183, "Provideo PV183-6" },
+ { 0x15401836, BTTV_BOARD_PV183, "Provideo PV183-7" },
+ { 0x15401837, BTTV_BOARD_PV183, "Provideo PV183-8" },
+ { 0x3116f200, BTTV_BOARD_TVT_TD3116, "Tongwei Video Technology TD-3116" },
+ { 0x02280279, BTTV_BOARD_APOSONIC_WDVR, "Aposonic W-DVR" },
+ { 0, -1, NULL }
+};
+
+/* ----------------------------------------------------------------------- */
+/* array with description for bt848 / bt878 tv/grabber cards */
+
+struct tvcard bttv_tvcards[] = {
+ /* ---- card 0x00 ---------------------------------- */
+ [BTTV_BOARD_UNKNOWN] = {
+ .name = " *** UNKNOWN/GENERIC *** ",
+ .video_inputs = 4,
+ .svhs = 2,
+ .muxsel = MUXSEL(2, 3, 1, 0),
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_MIRO] = {
+ .name = "MIRO PCTV",
+ .video_inputs = 4,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 15,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 2, 0, 0, 0 },
+ .gpiomute = 10,
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_HAUPPAUGE] = {
+ .name = "Hauppauge (bt848)",
+ .video_inputs = 4,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 7,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 0, 1, 2, 3 },
+ .gpiomute = 4,
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_STB] = {
+ .name = "STB, Gateway P/N 6000699 (bt848)",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 7,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 4, 0, 2, 3 },
+ .gpiomute = 1,
+ .no_msp34xx = 1,
+ .tuner_type = TUNER_PHILIPS_NTSC,
+ .tuner_addr = ADDR_UNSET,
+ .pll = PLL_28,
+ .has_radio = 1,
+ },
+
+ /* ---- card 0x04 ---------------------------------- */
+ [BTTV_BOARD_INTEL] = {
+ .name = "Intel Create and Share PCI/ Smart Video Recorder III",
+ .video_inputs = 4,
+ /* .audio_inputs= 0, */
+ .svhs = 2,
+ .gpiomask = 0,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 0 },
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_DIAMOND] = {
+ .name = "Diamond DTV2000",
+ .video_inputs = 4,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 3,
+ .muxsel = MUXSEL(2, 3, 1, 0),
+ .gpiomux = { 0, 1, 0, 1 },
+ .gpiomute = 3,
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_AVERMEDIA] = {
+ .name = "AVerMedia TVPhone",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 3,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomask = 0x0f,
+ .gpiomux = { 0x0c, 0x04, 0x08, 0x04 },
+ /* 0x04 for some cards ?? */
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .audio_mode_gpio= avermedia_tvphone_audio,
+ .has_remote = 1,
+ },
+ [BTTV_BOARD_MATRIX_VISION] = {
+ .name = "MATRIX-Vision MV-Delta",
+ .video_inputs = 5,
+ /* .audio_inputs= 1, */
+ .svhs = 3,
+ .gpiomask = 0,
+ .muxsel = MUXSEL(2, 3, 1, 0, 0),
+ .gpiomux = { 0 },
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ },
+
+ /* ---- card 0x08 ---------------------------------- */
+ [BTTV_BOARD_FLYVIDEO] = {
+ .name = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
+ .video_inputs = 4,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 0xc00,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 0, 0xc00, 0x800, 0x400 },
+ .gpiomute = 0xc00,
+ .pll = PLL_28,
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_TURBOTV] = {
+ .name = "IMS/IXmicro TurboTV",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 3,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 1, 1, 2, 3 },
+ .pll = PLL_28,
+ .tuner_type = TUNER_TEMIC_PAL,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_HAUPPAUGE878] = {
+ .name = "Hauppauge (bt878)",
+ .video_inputs = 4,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 0x0f, /* old: 7 */
+ .muxsel = MUXSEL(2, 0, 1, 1),
+ .gpiomux = { 0, 1, 2, 3 },
+ .gpiomute = 4,
+ .pll = PLL_28,
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_MIROPRO] = {
+ .name = "MIRO PCTV pro",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 0x3014f,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 0x20001,0x10001, 0, 0 },
+ .gpiomute = 10,
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ },
+
+ /* ---- card 0x0c ---------------------------------- */
+ [BTTV_BOARD_ADSTECH_TV] = {
+ .name = "ADS Technologies Channel Surfer TV (bt848)",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 15,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 13, 14, 11, 7 },
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_AVERMEDIA98] = {
+ .name = "AVerMedia TVCapture 98",
+ .video_inputs = 3,
+ /* .audio_inputs= 4, */
+ .svhs = 2,
+ .gpiomask = 15,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 13, 14, 11, 7 },
+ .msp34xx_alt = 1,
+ .pll = PLL_28,
+ .tuner_type = TUNER_PHILIPS_PAL,
+ .tuner_addr = ADDR_UNSET,
+ .audio_mode_gpio= avermedia_tv_stereo_audio,
+ .no_gpioirq = 1,
+ },
+ [BTTV_BOARD_VHX] = {
+ .name = "Aimslab Video Highway Xtreme (VHX)",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 7,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */
+ .gpiomute = 4,
+ .pll = PLL_28,
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_ZOLTRIX] = {
+ .name = "Zoltrix TV-Max",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 15,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 0, 0, 1, 0 },
+ .gpiomute = 10,
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ },
+
+ /* ---- card 0x10 ---------------------------------- */
+ [BTTV_BOARD_PIXVIEWPLAYTV] = {
+ .name = "Prolink Pixelview PlayTV (bt878)",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 0x01fe00,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
+ .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
+ .gpiomute = 0x002000,
+ .pll = PLL_28,
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_WINVIEW_601] = {
+ .name = "Leadtek WinView 601",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 0x8300f8,
+ .muxsel = MUXSEL(2, 3, 1, 1, 0),
+ .gpiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 },
+ .gpiomute = 0xcfa007,
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .volume_gpio = winview_volume,
+ .has_radio = 1,
+ },
+ [BTTV_BOARD_AVEC_INTERCAP] = {
+ .name = "AVEC Intercapture",
+ .video_inputs = 3,
+ /* .audio_inputs= 2, */
+ .svhs = 2,
+ .gpiomask = 0,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 1, 0, 0, 0 },
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_LIFE_FLYKIT] = {
+ .name = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
+ .video_inputs = 4,
+ /* .audio_inputs= 1, */
+ .svhs = NO_SVHS,
+ .gpiomask = 0x8dff00,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 0 },
+ .no_msp34xx = 1,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ },
+
+ /* ---- card 0x14 ---------------------------------- */
+ [BTTV_BOARD_CEI_RAFFLES] = {
+ .name = "CEI Raffles Card",
+ .video_inputs = 3,
+ /* .audio_inputs= 3, */
+ .svhs = 2,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_CONFERENCETV] = {
+ .name = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
+ .video_inputs = 4,
+ /* .audio_inputs= 2, tuner, line in */
+ .svhs = 2,
+ .gpiomask = 0x1800,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
+ .gpiomute = 0x1800,
+ .pll = PLL_28,
+ .tuner_type = TUNER_PHILIPS_PAL_I,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_PHOEBE_TVMAS] = {
+ .name = "Askey CPH050/ Phoebe Tv Master + FM",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 0xc00,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 0, 1, 0x800, 0x400 },
+ .gpiomute = 0xc00,
+ .pll = PLL_28,
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_MODTEC_205] = {
+ .name = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = NO_SVHS,
+ .has_dig_in = 1,
+ .gpiomask = 7,
+ .muxsel = MUXSEL(2, 3, 0), /* input 2 is digital */
+ /* .digital_mode= DIGITAL_MODE_CAMERA, */
+ .gpiomux = { 0, 0, 0, 0 },
+ .no_msp34xx = 1,
+ .pll = PLL_28,
+ .tuner_type = TUNER_ALPS_TSBB5_PAL_I,
+ .tuner_addr = ADDR_UNSET,
+ },
+
+ /* ---- card 0x18 ---------------------------------- */
+ [BTTV_BOARD_MAGICTVIEW061] = {
+ .name = "Askey CPH05X/06X (bt878) [many vendors]",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 0xe00,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = {0x400, 0x400, 0x400, 0x400 },
+ .gpiomute = 0xc00,
+ .pll = PLL_28,
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .has_remote = 1,
+ .has_radio = 1, /* not every card has radio */
+ },
+ [BTTV_BOARD_VOBIS_BOOSTAR] = {
+ .name = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 0x1f0fff,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
+ .gpiomute = 0x40000,
+ .tuner_type = TUNER_PHILIPS_PAL,
+ .tuner_addr = ADDR_UNSET,
+ .audio_mode_gpio= terratv_audio,
+ },
+ [BTTV_BOARD_HAUPPAUG_WCAM] = {
+ .name = "Hauppauge WinCam newer (bt878)",
+ .video_inputs = 4,
+ /* .audio_inputs= 1, */
+ .svhs = 3,
+ .gpiomask = 7,
+ .muxsel = MUXSEL(2, 0, 1, 1),
+ .gpiomux = { 0, 1, 2, 3 },
+ .gpiomute = 4,
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_MAXI] = {
+ .name = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
+ .video_inputs = 4,
+ /* .audio_inputs= 2, */
+ .svhs = 2,
+ .gpiomask = 0x1800,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
+ .gpiomute = 0x1800,
+ .pll = PLL_28,
+ .tuner_type = TUNER_PHILIPS_SECAM,
+ .tuner_addr = ADDR_UNSET,
+ },
+
+ /* ---- card 0x1c ---------------------------------- */
+ [BTTV_BOARD_TERRATV] = {
+ .name = "Terratec TerraTV+ Version 1.1 (bt878)",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 0x1f0fff,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 0x20000, 0x30000, 0x10000, 0x00000 },
+ .gpiomute = 0x40000,
+ .tuner_type = TUNER_PHILIPS_PAL,
+ .tuner_addr = ADDR_UNSET,
+ .audio_mode_gpio= terratv_audio,
+ /* GPIO wiring:
+ External 20 pin connector (for Active Radio Upgrade board)
+ gpio00: i2c-sda
+ gpio01: i2c-scl
+ gpio02: om5610-data
+ gpio03: om5610-clk
+ gpio04: om5610-wre
+ gpio05: om5610-stereo
+ gpio06: rds6588-davn
+ gpio07: Pin 7 n.c.
+ gpio08: nIOW
+ gpio09+10: nIOR, nSEL ?? (bt878)
+ gpio09: nIOR (bt848)
+ gpio10: nSEL (bt848)
+ Sound Routing:
+ gpio16: u2-A0 (1st 4052bt)
+ gpio17: u2-A1
+ gpio18: u2-nEN
+ gpio19: u4-A0 (2nd 4052)
+ gpio20: u4-A1
+ u4-nEN - GND
+ Btspy:
+ 00000 : Cdrom (internal audio input)
+ 10000 : ext. Video audio input
+ 20000 : TV Mono
+ a0000 : TV Mono/2
+ 1a0000 : TV Stereo
+ 30000 : Radio
+ 40000 : Mute
+ */
+
+ },
+ [BTTV_BOARD_PXC200] = {
+ /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
+ .name = "Imagenation PXC200",
+ .video_inputs = 5,
+ /* .audio_inputs= 1, */
+ .svhs = 1, /* was: 4 */
+ .gpiomask = 0,
+ .muxsel = MUXSEL(2, 3, 1, 0, 0),
+ .gpiomux = { 0 },
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ .muxsel_hook = PXC200_muxsel,
+
+ },
+ [BTTV_BOARD_FLYVIDEO_98] = {
+ .name = "Lifeview FlyVideo 98 LR50",
+ .video_inputs = 4,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 0x1800, /* 0x8dfe00 */
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 0, 0x0800, 0x1000, 0x1000 },
+ .gpiomute = 0x1800,
+ .pll = PLL_28,
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_IPROTV] = {
+ .name = "Formac iProTV, Formac ProTV I (bt848)",
+ .video_inputs = 4,
+ /* .audio_inputs= 1, */
+ .svhs = 3,
+ .gpiomask = 1,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 1, 0, 0, 0 },
+ .pll = PLL_28,
+ .tuner_type = TUNER_PHILIPS_PAL,
+ .tuner_addr = ADDR_UNSET,
+ },
+
+ /* ---- card 0x20 ---------------------------------- */
+ [BTTV_BOARD_INTEL_C_S_PCI] = {
+ .name = "Intel Create and Share PCI/ Smart Video Recorder III",
+ .video_inputs = 4,
+ /* .audio_inputs= 0, */
+ .svhs = 2,
+ .gpiomask = 0,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 0 },
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_TERRATVALUE] = {
+ .name = "Terratec TerraTValue Version Bt878",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 0xffff00,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 0x500, 0, 0x300, 0x900 },
+ .gpiomute = 0x900,
+ .pll = PLL_28,
+ .tuner_type = TUNER_PHILIPS_PAL,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_WINFAST2000] = {
+ .name = "Leadtek WinFast 2000/ WinFast 2000 XP",
+ .video_inputs = 4,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ /* TV, CVid, SVid, CVid over SVid connector */
+ .muxsel = MUXSEL(2, 3, 1, 1, 0),
+ /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
+ .gpiomask = 0xb33000,
+ .gpiomux = { 0x122000,0x1000,0x0000,0x620000 },
+ .gpiomute = 0x800000,
+ /* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
+ gpio23 -- hef4052:nEnable (0x800000)
+ gpio12 -- hef4052:A1
+ gpio13 -- hef4052:A0
+ 0x0000: external audio
+ 0x1000: FM
+ 0x2000: TV
+ 0x3000: n.c.
+ Note: There exists another variant "Winfast 2000" with tv stereo !?
+ Note: eeprom only contains FF and pci subsystem id 107d:6606
+ */
+ .pll = PLL_28,
+ .has_radio = 1,
+ .tuner_type = TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */
+ .tuner_addr = ADDR_UNSET,
+ .audio_mode_gpio= winfast2000_audio,
+ .has_remote = 1,
+ },
+ [BTTV_BOARD_CHRONOS_VS2] = {
+ .name = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
+ .video_inputs = 4,
+ /* .audio_inputs= 3, */
+ .svhs = 2,
+ .gpiomask = 0x1800,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
+ .gpiomute = 0x1800,
+ .pll = PLL_28,
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ },
+
+ /* ---- card 0x24 ---------------------------------- */
+ [BTTV_BOARD_TYPHOON_TVIEW] = {
+ .name = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
+ .video_inputs = 4,
+ /* .audio_inputs= 3, */
+ .svhs = 2,
+ .gpiomask = 0x1800,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
+ .gpiomute = 0x1800,
+ .pll = PLL_28,
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .has_radio = 1,
+ },
+ [BTTV_BOARD_PXELVWPLTVPRO] = {
+ .name = "Prolink PixelView PlayTV pro",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 0xff,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 0x21, 0x20, 0x24, 0x2c },
+ .gpiomute = 0x29,
+ .no_msp34xx = 1,
+ .pll = PLL_28,
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_MAGICTVIEW063] = {
+ .name = "Askey CPH06X TView99",
+ .video_inputs = 4,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 0x551e00,
+ .muxsel = MUXSEL(2, 3, 1, 0),
+ .gpiomux = { 0x551400, 0x551200, 0, 0 },
+ .gpiomute = 0x551c00,
+ .pll = PLL_28,
+ .tuner_type = TUNER_PHILIPS_PAL_I,
+ .tuner_addr = ADDR_UNSET,
+ .has_remote = 1,
+ },
+ [BTTV_BOARD_PINNACLE] = {
+ .name = "Pinnacle PCTV Studio/Rave",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 0x03000F,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 2, 0xd0001, 0, 0 },
+ .gpiomute = 1,
+ .pll = PLL_28,
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ },
+
+ /* ---- card 0x28 ---------------------------------- */
+ [BTTV_BOARD_STB2] = {
+ .name = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 7,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 4, 0, 2, 3 },
+ .gpiomute = 1,
+ .no_msp34xx = 1,
+ .tuner_type = TUNER_PHILIPS_NTSC,
+ .tuner_addr = ADDR_UNSET,
+ .pll = PLL_28,
+ .has_radio = 1,
+ },
+ [BTTV_BOARD_AVPHONE98] = {
+ .name = "AVerMedia TVPhone 98",
+ .video_inputs = 3,
+ /* .audio_inputs= 4, */
+ .svhs = 2,
+ .gpiomask = 15,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 13, 4, 11, 7 },
+ .pll = PLL_28,
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .has_radio = 1,
+ .audio_mode_gpio= avermedia_tvphone_audio,
+ },
+ [BTTV_BOARD_PV951] = {
+ .name = "ProVideo PV951", /* pic16c54 */
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 0,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 0, 0, 0, 0},
+ .no_msp34xx = 1,
+ .pll = PLL_28,
+ .tuner_type = TUNER_PHILIPS_PAL_I,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_ONAIR_TV] = {
+ .name = "Little OnAir TV",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 0xe00b,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 },
+ .gpiomute = 0xff3ffc,
+ .no_msp34xx = 1,
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ },
+
+ /* ---- card 0x2c ---------------------------------- */
+ [BTTV_BOARD_SIGMA_TVII_FM] = {
+ .name = "Sigma TVII-FM",
+ .video_inputs = 2,
+ /* .audio_inputs= 1, */
+ .svhs = NO_SVHS,
+ .gpiomask = 3,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 1, 1, 0, 2 },
+ .gpiomute = 3,
+ .no_msp34xx = 1,
+ .pll = PLL_NONE,
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_MATRIX_VISION2] = {
+ .name = "MATRIX-Vision MV-Delta 2",
+ .video_inputs = 5,
+ /* .audio_inputs= 1, */
+ .svhs = 3,
+ .gpiomask = 0,
+ .muxsel = MUXSEL(2, 3, 1, 0, 0),
+ .gpiomux = { 0 },
+ .no_msp34xx = 1,
+ .pll = PLL_28,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_ZOLTRIX_GENIE] = {
+ .name = "Zoltrix Genie TV/FM",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 0xbcf03f,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 },
+ .gpiomute = 0xbcb03f,
+ .no_msp34xx = 1,
+ .pll = PLL_28,
+ .tuner_type = TUNER_TEMIC_4039FR5_NTSC,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_TERRATVRADIO] = {
+ .name = "Terratec TV/Radio+",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 0x70000,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
+ .gpiomute = 0x40000,
+ .no_msp34xx = 1,
+ .pll = PLL_35,
+ .tuner_type = TUNER_PHILIPS_PAL_I,
+ .tuner_addr = ADDR_UNSET,
+ .has_radio = 1,
+ },
+
+ /* ---- card 0x30 ---------------------------------- */
+ [BTTV_BOARD_DYNALINK] = {
+ .name = "Askey CPH03x/ Dynalink Magic TView",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 15,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = {2,0,0,0 },
+ .gpiomute = 1,
+ .pll = PLL_28,
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_GVBCTV3PCI] = {
+ .name = "IODATA GV-BCTV3/PCI",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 0x010f00,
+ .muxsel = MUXSEL(2, 3, 0, 0),
+ .gpiomux = {0x10000, 0, 0x10000, 0 },
+ .no_msp34xx = 1,
+ .pll = PLL_28,
+ .tuner_type = TUNER_ALPS_TSHC6_NTSC,
+ .tuner_addr = ADDR_UNSET,
+ .audio_mode_gpio= gvbctv3pci_audio,
+ },
+ [BTTV_BOARD_PXELVWPLTVPAK] = {
+ .name = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
+ .video_inputs = 5,
+ /* .audio_inputs= 1, */
+ .svhs = 3,
+ .has_dig_in = 1,
+ .gpiomask = 0xAA0000,
+ .muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
+ /* .digital_mode= DIGITAL_MODE_CAMERA, */
+ .gpiomux = { 0x20000, 0, 0x80000, 0x80000 },
+ .gpiomute = 0xa8000,
+ .no_msp34xx = 1,
+ .pll = PLL_28,
+ .tuner_type = TUNER_PHILIPS_PAL_I,
+ .tuner_addr = ADDR_UNSET,
+ .has_remote = 1,
+ /* GPIO wiring: (different from Rev.4C !)
+ GPIO17: U4.A0 (first hef4052bt)
+ GPIO19: U4.A1
+ GPIO20: U5.A1 (second hef4052bt)
+ GPIO21: U4.nEN
+ GPIO22: BT832 Reset Line
+ GPIO23: A5,A0, U5,nEN
+ Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
+ */
+ },
+ [BTTV_BOARD_EAGLE] = {
+ .name = "Eagle Wireless Capricorn2 (bt878A)",
+ .video_inputs = 4,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 7,
+ .muxsel = MUXSEL(2, 0, 1, 1),
+ .gpiomux = { 0, 1, 2, 3 },
+ .gpiomute = 4,
+ .pll = PLL_28,
+ .tuner_type = UNSET /* TUNER_ALPS_TMDH2_NTSC */,
+ .tuner_addr = ADDR_UNSET,
+ },
+
+ /* ---- card 0x34 ---------------------------------- */
+ [BTTV_BOARD_PINNACLEPRO] = {
+ /* David Härdeman <david@2gen.com> */
+ .name = "Pinnacle PCTV Studio Pro",
+ .video_inputs = 4,
+ /* .audio_inputs= 1, */
+ .svhs = 3,
+ .gpiomask = 0x03000F,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 1, 0xd0001, 0, 0 },
+ .gpiomute = 10,
+ /* sound path (5 sources):
+ MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
+ 0= ext. Audio IN
+ 1= from MUX2
+ 2= Mono TV sound from Tuner
+ 3= not connected
+ MUX2 (mask 0x30000):
+ 0,2,3= from MSP34xx
+ 1= FM stereo Radio from Tuner */
+ .pll = PLL_28,
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_TVIEW_RDS_FM] = {
+ /* Claas Langbehn <claas@bigfoot.com>,
+ Sven Grothklags <sven@upb.de> */
+ .name = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
+ .video_inputs = 4,
+ /* .audio_inputs= 3, */
+ .svhs = 2,
+ .gpiomask = 0x1c,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 0, 0, 0x10, 8 },
+ .gpiomute = 4,
+ .pll = PLL_28,
+ .tuner_type = TUNER_PHILIPS_PAL,
+ .tuner_addr = ADDR_UNSET,
+ .has_radio = 1,
+ },
+ [BTTV_BOARD_LIFETEC_9415] = {
+ /* Tim Röstermundt <rosterm@uni-muenster.de>
+ in de.comp.os.unix.linux.hardware:
+ options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
+ gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
+ options tuner type=5 */
+ .name = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
+ .video_inputs = 4,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 0x18e0,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 0x0000,0x0800,0x1000,0x1000 },
+ .gpiomute = 0x18e0,
+ /* For cards with tda9820/tda9821:
+ 0x0000: Tuner normal stereo
+ 0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
+ 0x0880: Tuner A2 stereo */
+ .pll = PLL_28,
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_BESTBUY_EASYTV] = {
+ /* Miguel Angel Alvarez <maacruz@navegalia.com>
+ old Easy TV BT848 version (model CPH031) */
+ .name = "Askey CPH031/ BESTBUY Easy TV",
+ .video_inputs = 4,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 0xF,
+ .muxsel = MUXSEL(2, 3, 1, 0),
+ .gpiomux = { 2, 0, 0, 0 },
+ .gpiomute = 10,
+ .pll = PLL_28,
+ .tuner_type = TUNER_TEMIC_PAL,
+ .tuner_addr = ADDR_UNSET,
+ },
+
+ /* ---- card 0x38 ---------------------------------- */
+ [BTTV_BOARD_FLYVIDEO_98FM] = {
+ /* Gordon Heydon <gjheydon@bigfoot.com ('98) */
+ .name = "Lifeview FlyVideo 98FM LR50",
+ .video_inputs = 4,
+ /* .audio_inputs= 3, */
+ .svhs = 2,
+ .gpiomask = 0x1800,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
+ .gpiomute = 0x1800,
+ .pll = PLL_28,
+ .tuner_type = TUNER_PHILIPS_PAL,
+ .tuner_addr = ADDR_UNSET,
+ },
+ /* This is the ultimate cheapo capture card
+ * just a BT848A on a small PCB!
+ * Steve Hosgood <steve@equiinet.com> */
+ [BTTV_BOARD_GRANDTEC] = {
+ .name = "GrandTec 'Grand Video Capture' (Bt848)",
+ .video_inputs = 2,
+ /* .audio_inputs= 0, */
+ .svhs = 1,
+ .gpiomask = 0,
+ .muxsel = MUXSEL(3, 1),
+ .gpiomux = { 0 },
+ .no_msp34xx = 1,
+ .pll = PLL_35,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_ASKEY_CPH060] = {
+ /* Daniel Herrington <daniel.herrington@home.com> */
+ .name = "Askey CPH060/ Phoebe TV Master Only (No FM)",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 0xe00,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 0x400, 0x400, 0x400, 0x400 },
+ .gpiomute = 0x800,
+ .pll = PLL_28,
+ .tuner_type = TUNER_TEMIC_4036FY5_NTSC,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_ASKEY_CPH03X] = {
+ /* Matti Mottus <mottus@physic.ut.ee> */
+ .name = "Askey CPH03x TV Capturer",
+ .video_inputs = 4,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 0x03000F,
+ .muxsel = MUXSEL(2, 3, 1, 0),
+ .gpiomux = { 2, 0, 0, 0 },
+ .gpiomute = 1,
+ .pll = PLL_28,
+ .tuner_type = TUNER_TEMIC_PAL,
+ .tuner_addr = ADDR_UNSET,
+ .has_remote = 1,
+ },
+
+ /* ---- card 0x3c ---------------------------------- */
+ [BTTV_BOARD_MM100PCTV] = {
+ /* Philip Blundell <philb@gnu.org> */
+ .name = "Modular Technology MM100PCTV",
+ .video_inputs = 2,
+ /* .audio_inputs= 2, */
+ .svhs = NO_SVHS,
+ .gpiomask = 11,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 2, 0, 0, 1 },
+ .gpiomute = 8,
+ .pll = PLL_35,
+ .tuner_type = TUNER_TEMIC_PAL,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_GMV1] = {
+ /* Adrian Cox <adrian@humboldt.co.uk */
+ .name = "AG Electronics GMV1",
+ .video_inputs = 2,
+ /* .audio_inputs= 0, */
+ .svhs = 1,
+ .gpiomask = 0xF,
+ .muxsel = MUXSEL(2, 2),
+ .gpiomux = { },
+ .no_msp34xx = 1,
+ .pll = PLL_28,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_BESTBUY_EASYTV2] = {
+ /* Miguel Angel Alvarez <maacruz@navegalia.com>
+ new Easy TV BT878 version (model CPH061)
+ special thanks to Informatica Mieres for providing the card */
+ .name = "Askey CPH061/ BESTBUY Easy TV (bt878)",
+ .video_inputs = 3,
+ /* .audio_inputs= 2, */
+ .svhs = 2,
+ .gpiomask = 0xFF,
+ .muxsel = MUXSEL(2, 3, 1, 0),
+ .gpiomux = { 1, 0, 4, 4 },
+ .gpiomute = 9,
+ .pll = PLL_28,
+ .tuner_type = TUNER_PHILIPS_PAL,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_ATI_TVWONDER] = {
+ /* Lukas Gebauer <geby@volny.cz> */
+ .name = "ATI TV-Wonder",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 0xf03f,
+ .muxsel = MUXSEL(2, 3, 1, 0),
+ .gpiomux = { 0xbffe, 0, 0xbfff, 0 },
+ .gpiomute = 0xbffe,
+ .pll = PLL_28,
+ .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
+ .tuner_addr = ADDR_UNSET,
+ },
+
+ /* ---- card 0x40 ---------------------------------- */
+ [BTTV_BOARD_ATI_TVWONDERVE] = {
+ /* Lukas Gebauer <geby@volny.cz> */
+ .name = "ATI TV-Wonder VE",
+ .video_inputs = 2,
+ /* .audio_inputs= 1, */
+ .svhs = NO_SVHS,
+ .gpiomask = 1,
+ .muxsel = MUXSEL(2, 3, 0, 1),
+ .gpiomux = { 0, 0, 1, 0 },
+ .no_msp34xx = 1,
+ .pll = PLL_28,
+ .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_FLYVIDEO2000] = {
+ /* DeeJay <deejay@westel900.net (2000S) */
+ .name = "Lifeview FlyVideo 2000S LR90",
+ .video_inputs = 3,
+ /* .audio_inputs= 3, */
+ .svhs = 2,
+ .gpiomask = 0x18e0,
+ .muxsel = MUXSEL(2, 3, 0, 1),
+ /* Radio changed from 1e80 to 0x800 to make
+ FlyVideo2000S in .hu happy (gm)*/
+ /* -dk-???: set mute=0x1800 for tda9874h daughterboard */
+ .gpiomux = { 0x0000,0x0800,0x1000,0x1000 },
+ .gpiomute = 0x1800,
+ .audio_mode_gpio= fv2000s_audio,
+ .no_msp34xx = 1,
+ .pll = PLL_28,
+ .tuner_type = TUNER_PHILIPS_PAL,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_TERRATVALUER] = {
+ .name = "Terratec TValueRadio",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 0xffff00,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 0x500, 0x500, 0x300, 0x900 },
+ .gpiomute = 0x900,
+ .pll = PLL_28,
+ .tuner_type = TUNER_PHILIPS_PAL,
+ .tuner_addr = ADDR_UNSET,
+ .has_radio = 1,
+ },
+ [BTTV_BOARD_GVBCTV4PCI] = {
+ /* TANAKA Kei <peg00625@nifty.com> */
+ .name = "IODATA GV-BCTV4/PCI",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 0x010f00,
+ .muxsel = MUXSEL(2, 3, 0, 0),
+ .gpiomux = {0x10000, 0, 0x10000, 0 },
+ .no_msp34xx = 1,
+ .pll = PLL_28,
+ .tuner_type = TUNER_SHARP_2U5JF5540_NTSC,
+ .tuner_addr = ADDR_UNSET,
+ .audio_mode_gpio= gvbctv3pci_audio,
+ },
+
+ /* ---- card 0x44 ---------------------------------- */
+ [BTTV_BOARD_VOODOOTV_FM] = {
+ .name = "3Dfx VoodooTV FM (Euro)",
+ /* try "insmod msp3400 simple=0" if you have
+ * sound problems with this card. */
+ .video_inputs = 4,
+ /* .audio_inputs= 1, */
+ .svhs = NO_SVHS,
+ .gpiomask = 0x4f8a00,
+ /* 0x100000: 1=MSP enabled (0=disable again)
+ * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
+ .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff },
+ .gpiomute = 0x947fff,
+ /* tvtuner, radio, external,internal, mute, stereo
+ * tuner, Composit, SVid, Composit-on-Svid-adapter */
+ .muxsel = MUXSEL(2, 3, 0, 1),
+ .tuner_type = TUNER_MT2032,
+ .tuner_addr = ADDR_UNSET,
+ .pll = PLL_28,
+ .has_radio = 1,
+ },
+ [BTTV_BOARD_VOODOOTV_200] = {
+ .name = "VoodooTV 200 (USA)",
+ /* try "insmod msp3400 simple=0" if you have
+ * sound problems with this card. */
+ .video_inputs = 4,
+ /* .audio_inputs= 1, */
+ .svhs = NO_SVHS,
+ .gpiomask = 0x4f8a00,
+ /* 0x100000: 1=MSP enabled (0=disable again)
+ * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
+ .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff },
+ .gpiomute = 0x947fff,
+ /* tvtuner, radio, external,internal, mute, stereo
+ * tuner, Composit, SVid, Composit-on-Svid-adapter */
+ .muxsel = MUXSEL(2, 3, 0, 1),
+ .tuner_type = TUNER_MT2032,
+ .tuner_addr = ADDR_UNSET,
+ .pll = PLL_28,
+ .has_radio = 1,
+ },
+ [BTTV_BOARD_AIMMS] = {
+ /* Philip Blundell <pb@nexus.co.uk> */
+ .name = "Active Imaging AIMMS",
+ .video_inputs = 1,
+ /* .audio_inputs= 0, */
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ .pll = PLL_28,
+ .muxsel = MUXSEL(2),
+ .gpiomask = 0
+ },
+ [BTTV_BOARD_PV_BT878P_PLUS] = {
+ /* Tomasz Pyra <hellfire@sedez.iq.pl> */
+ .name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
+ .video_inputs = 3,
+ /* .audio_inputs= 4, */
+ .svhs = 2,
+ .gpiomask = 15,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */
+ .gpiomute = 13,
+ .pll = PLL_28,
+ .tuner_type = TUNER_LG_PAL_I_FM,
+ .tuner_addr = ADDR_UNSET,
+ .has_remote = 1,
+ /* GPIO wiring:
+ GPIO0: U4.A0 (hef4052bt)
+ GPIO1: U4.A1
+ GPIO2: U4.A1 (second hef4052bt)
+ GPIO3: U4.nEN, U5.A0, A5.nEN
+ GPIO8-15: vrd866b ?
+ */
+ },
+ [BTTV_BOARD_FLYVIDEO98EZ] = {
+ .name = "Lifeview FlyVideo 98EZ (capture only) LR51",
+ .video_inputs = 4,
+ /* .audio_inputs= 0, */
+ .svhs = 2,
+ /* AV1, AV2, SVHS, CVid adapter on SVHS */
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .pll = PLL_28,
+ .no_msp34xx = 1,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ },
+
+ /* ---- card 0x48 ---------------------------------- */
+ [BTTV_BOARD_PV_BT878P_9B] = {
+ /* Dariusz Kowalewski <darekk@automex.pl> */
+ .name = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
+ .video_inputs = 4,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 0x3f,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 0x01, 0x00, 0x03, 0x03 },
+ .gpiomute = 0x09,
+ .no_msp34xx = 1,
+ .pll = PLL_28,
+ .tuner_type = TUNER_PHILIPS_PAL,
+ .tuner_addr = ADDR_UNSET,
+ .audio_mode_gpio= pvbt878p9b_audio, /* Note: not all cards have stereo */
+ .has_radio = 1, /* Note: not all cards have radio */
+ .has_remote = 1,
+ /* GPIO wiring:
+ GPIO0: A0 hef4052
+ GPIO1: A1 hef4052
+ GPIO3: nEN hef4052
+ GPIO8-15: vrd866b
+ GPIO20,22,23: R30,R29,R28
+ */
+ },
+ [BTTV_BOARD_SENSORAY311_611] = {
+ /* Clay Kunz <ckunz@mail.arc.nasa.gov> */
+ /* you must jumper JP5 for the 311 card (PC/104+) to work */
+ .name = "Sensoray 311/611",
+ .video_inputs = 5,
+ /* .audio_inputs= 0, */
+ .svhs = 4,
+ .gpiomask = 0,
+ .muxsel = MUXSEL(2, 3, 1, 0, 0),
+ .gpiomux = { 0 },
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_RV605] = {
+ /* Miguel Freitas <miguel@cetuc.puc-rio.br> */
+ .name = "RemoteVision MX (RV605)",
+ .video_inputs = 16,
+ /* .audio_inputs= 0, */
+ .svhs = NO_SVHS,
+ .gpiomask = 0x00,
+ .gpiomask2 = 0x07ff,
+ .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
+ .no_msp34xx = 1,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ .muxsel_hook = rv605_muxsel,
+ },
+ [BTTV_BOARD_POWERCLR_MTV878] = {
+ .name = "Powercolor MTV878/ MTV878R/ MTV878F",
+ .video_inputs = 3,
+ /* .audio_inputs= 2, */
+ .svhs = 2,
+ .gpiomask = 0x1C800F, /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
+ .muxsel = MUXSEL(2, 1, 1),
+ .gpiomux = { 0, 1, 2, 2 },
+ .gpiomute = 4,
+ .tuner_type = TUNER_PHILIPS_PAL,
+ .tuner_addr = ADDR_UNSET,
+ .pll = PLL_28,
+ .has_radio = 1,
+ },
+
+ /* ---- card 0x4c ---------------------------------- */
+ [BTTV_BOARD_WINDVR] = {
+ /* Masaki Suzuki <masaki@btree.org> */
+ .name = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 0x140007,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 0, 1, 2, 3 },
+ .gpiomute = 4,
+ .tuner_type = TUNER_PHILIPS_NTSC,
+ .tuner_addr = ADDR_UNSET,
+ .audio_mode_gpio= windvr_audio,
+ },
+ [BTTV_BOARD_GRANDTEC_MULTI] = {
+ .name = "GrandTec Multi Capture Card (Bt878)",
+ .video_inputs = 4,
+ /* .audio_inputs= 0, */
+ .svhs = NO_SVHS,
+ .gpiomask = 0,
+ .muxsel = MUXSEL(2, 3, 1, 0),
+ .gpiomux = { 0 },
+ .no_msp34xx = 1,
+ .pll = PLL_28,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_KWORLD] = {
+ .name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
+ .video_inputs = 4,
+ /* .audio_inputs= 3, */
+ .svhs = 2,
+ .gpiomask = 7,
+ /* Tuner, SVid, SVHS, SVid to SVHS connector */
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio!
+ * This card lacks external Audio In, so we mute it on Ext. & Int.
+ * The PCB can take a sbx1637/sbx1673, wiring unknown.
+ * This card lacks PCI subsystem ID, sigh.
+ * gpiomux =1: lower volume, 2+3: mute
+ * btwincap uses 0x80000/0x80003
+ */
+ .gpiomute = 4,
+ .no_msp34xx = 1,
+ .pll = PLL_28,
+ .tuner_type = TUNER_PHILIPS_PAL,
+ .tuner_addr = ADDR_UNSET,
+ /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
+ radio signal strength indicators work fine. */
+ .has_radio = 1,
+ /* GPIO Info:
+ GPIO0,1: HEF4052 A0,A1
+ GPIO2: HEF4052 nENABLE
+ GPIO3-7: n.c.
+ GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
+ GPIO14,15: ??
+ GPIO16-21: n.c.
+ GPIO22,23: ??
+ ?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
+ },
+ [BTTV_BOARD_DSP_TCVIDEO] = {
+ /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
+ .name = "DSP Design TCVIDEO",
+ .video_inputs = 4,
+ .svhs = NO_SVHS,
+ .muxsel = MUXSEL(2, 3, 1, 0),
+ .pll = PLL_28,
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ },
+
+ /* ---- card 0x50 ---------------------------------- */
+ [BTTV_BOARD_HAUPPAUGEPVR] = {
+ .name = "Hauppauge WinTV PVR",
+ .video_inputs = 4,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .muxsel = MUXSEL(2, 0, 1, 1),
+ .pll = PLL_28,
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+
+ .gpiomask = 7,
+ .gpiomux = {7},
+ },
+ [BTTV_BOARD_GVBCTV5PCI] = {
+ .name = "IODATA GV-BCTV5/PCI",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 0x0f0f80,
+ .muxsel = MUXSEL(2, 3, 1, 0),
+ .gpiomux = {0x030000, 0x010000, 0, 0 },
+ .gpiomute = 0x020000,
+ .no_msp34xx = 1,
+ .pll = PLL_28,
+ .tuner_type = TUNER_PHILIPS_NTSC_M,
+ .tuner_addr = ADDR_UNSET,
+ .audio_mode_gpio= gvbctv5pci_audio,
+ .has_radio = 1,
+ },
+ [BTTV_BOARD_OSPREY1x0] = {
+ .name = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
+ .video_inputs = 4, /* id-inputs-clock */
+ /* .audio_inputs= 0, */
+ .svhs = 3,
+ .muxsel = MUXSEL(3, 2, 0, 1),
+ .pll = PLL_28,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ .no_msp34xx = 1,
+ .no_tda7432 = 1,
+ },
+ [BTTV_BOARD_OSPREY1x0_848] = {
+ .name = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
+ .video_inputs = 3,
+ /* .audio_inputs= 0, */
+ .svhs = 2,
+ .muxsel = MUXSEL(2, 3, 1),
+ .pll = PLL_28,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ .no_msp34xx = 1,
+ .no_tda7432 = 1,
+ },
+
+ /* ---- card 0x54 ---------------------------------- */
+ [BTTV_BOARD_OSPREY101_848] = {
+ .name = "Osprey 101 (848)", /* 0x05-40C0-C1 */
+ .video_inputs = 2,
+ /* .audio_inputs= 0, */
+ .svhs = 1,
+ .muxsel = MUXSEL(3, 1),
+ .pll = PLL_28,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ .no_msp34xx = 1,
+ .no_tda7432 = 1,
+ },
+ [BTTV_BOARD_OSPREY1x1] = {
+ .name = "Osprey 101/151", /* 0x1(4|5)-0004-C4 */
+ .video_inputs = 1,
+ /* .audio_inputs= 0, */
+ .svhs = NO_SVHS,
+ .muxsel = MUXSEL(0),
+ .pll = PLL_28,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ .no_msp34xx = 1,
+ .no_tda7432 = 1,
+ },
+ [BTTV_BOARD_OSPREY1x1_SVID] = {
+ .name = "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */
+ .video_inputs = 2,
+ /* .audio_inputs= 0, */
+ .svhs = 1,
+ .muxsel = MUXSEL(0, 1),
+ .pll = PLL_28,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ .no_msp34xx = 1,
+ .no_tda7432 = 1,
+ },
+ [BTTV_BOARD_OSPREY2xx] = {
+ .name = "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */
+ .video_inputs = 1,
+ /* .audio_inputs= 1, */
+ .svhs = NO_SVHS,
+ .muxsel = MUXSEL(0),
+ .pll = PLL_28,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ .no_msp34xx = 1,
+ .no_tda7432 = 1,
+ },
+
+ /* ---- card 0x58 ---------------------------------- */
+ [BTTV_BOARD_OSPREY2x0_SVID] = {
+ .name = "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */
+ .video_inputs = 2,
+ /* .audio_inputs= 1, */
+ .svhs = 1,
+ .muxsel = MUXSEL(0, 1),
+ .pll = PLL_28,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ .no_msp34xx = 1,
+ .no_tda7432 = 1,
+ },
+ [BTTV_BOARD_OSPREY2x0] = {
+ .name = "Osprey 210/220/230", /* 0x1(A|B)-04C0-C1 */
+ .video_inputs = 2,
+ /* .audio_inputs= 1, */
+ .svhs = 1,
+ .muxsel = MUXSEL(2, 3),
+ .pll = PLL_28,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ .no_msp34xx = 1,
+ .no_tda7432 = 1,
+ },
+ [BTTV_BOARD_OSPREY500] = {
+ .name = "Osprey 500", /* 500 */
+ .video_inputs = 2,
+ /* .audio_inputs= 1, */
+ .svhs = 1,
+ .muxsel = MUXSEL(2, 3),
+ .pll = PLL_28,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ .no_msp34xx = 1,
+ .no_tda7432 = 1,
+ },
+ [BTTV_BOARD_OSPREY540] = {
+ .name = "Osprey 540", /* 540 */
+ .video_inputs = 4,
+ /* .audio_inputs= 1, */
+ .pll = PLL_28,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ .no_msp34xx = 1,
+ .no_tda7432 = 1,
+ },
+
+ /* ---- card 0x5C ---------------------------------- */
+ [BTTV_BOARD_OSPREY2000] = {
+ .name = "Osprey 2000", /* 2000 */
+ .video_inputs = 2,
+ /* .audio_inputs= 1, */
+ .svhs = 1,
+ .muxsel = MUXSEL(2, 3),
+ .pll = PLL_28,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ .no_msp34xx = 1,
+ .no_tda7432 = 1, /* must avoid, conflicts with the bt860 */
+ },
+ [BTTV_BOARD_IDS_EAGLE] = {
+ /* M G Berberich <berberic@forwiss.uni-passau.de> */
+ .name = "IDS Eagle",
+ .video_inputs = 4,
+ /* .audio_inputs= 0, */
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ .svhs = NO_SVHS,
+ .gpiomask = 0,
+ .muxsel = MUXSEL(2, 2, 2, 2),
+ .muxsel_hook = eagle_muxsel,
+ .no_msp34xx = 1,
+ .pll = PLL_28,
+ },
+ [BTTV_BOARD_PINNACLESAT] = {
+ .name = "Pinnacle PCTV Sat",
+ .video_inputs = 2,
+ /* .audio_inputs= 0, */
+ .svhs = 1,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ .no_msp34xx = 1,
+ .no_tda7432 = 1,
+ .muxsel = MUXSEL(3, 1),
+ .pll = PLL_28,
+ .no_gpioirq = 1,
+ .has_dvb = 1,
+ },
+ [BTTV_BOARD_FORMAC_PROTV] = {
+ .name = "Formac ProTV II (bt878)",
+ .video_inputs = 4,
+ /* .audio_inputs= 1, */
+ .svhs = 3,
+ .gpiomask = 2,
+ /* TV, Comp1, Composite over SVID con, SVID */
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 2, 2, 0, 0 },
+ .pll = PLL_28,
+ .has_radio = 1,
+ .tuner_type = TUNER_PHILIPS_PAL,
+ .tuner_addr = ADDR_UNSET,
+ /* sound routing:
+ GPIO=0x00,0x01,0x03: mute (?)
+ 0x02: both TV and radio (tuner: FM1216/I)
+ The card has onboard audio connectors labeled "cdrom" and "board",
+ not soldered here, though unknown wiring.
+ Card lacks: external audio in, pci subsystem id.
+ */
+ },
+
+ /* ---- card 0x60 ---------------------------------- */
+ [BTTV_BOARD_MACHTV] = {
+ .name = "MachTV",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = NO_SVHS,
+ .gpiomask = 7,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 0, 1, 2, 3},
+ .gpiomute = 4,
+ .tuner_type = TUNER_PHILIPS_PAL,
+ .tuner_addr = ADDR_UNSET,
+ .pll = PLL_28,
+ },
+ [BTTV_BOARD_EURESYS_PICOLO] = {
+ .name = "Euresys Picolo",
+ .video_inputs = 3,
+ /* .audio_inputs= 0, */
+ .svhs = 2,
+ .gpiomask = 0,
+ .no_msp34xx = 1,
+ .no_tda7432 = 1,
+ .muxsel = MUXSEL(2, 0, 1),
+ .pll = PLL_28,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_PV150] = {
+ /* Luc Van Hoeylandt <luc@e-magic.be> */
+ .name = "ProVideo PV150", /* 0x4f */
+ .video_inputs = 2,
+ /* .audio_inputs= 0, */
+ .svhs = NO_SVHS,
+ .gpiomask = 0,
+ .muxsel = MUXSEL(2, 3),
+ .gpiomux = { 0 },
+ .no_msp34xx = 1,
+ .pll = PLL_28,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_AD_TVK503] = {
+ /* Hiroshi Takekawa <sian@big.or.jp> */
+ /* This card lacks subsystem ID */
+ .name = "AD-TVK503", /* 0x63 */
+ .video_inputs = 4,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 0x001e8007,
+ .muxsel = MUXSEL(2, 3, 1, 0),
+ /* Tuner, Radio, external, internal, off, on */
+ .gpiomux = { 0x08, 0x0f, 0x0a, 0x08 },
+ .gpiomute = 0x0f,
+ .no_msp34xx = 1,
+ .pll = PLL_28,
+ .tuner_type = TUNER_PHILIPS_NTSC,
+ .tuner_addr = ADDR_UNSET,
+ .audio_mode_gpio= adtvk503_audio,
+ },
+
+ /* ---- card 0x64 ---------------------------------- */
+ [BTTV_BOARD_HERCULES_SM_TV] = {
+ .name = "Hercules Smart TV Stereo",
+ .video_inputs = 4,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 0x00,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .no_msp34xx = 1,
+ .pll = PLL_28,
+ .tuner_type = TUNER_PHILIPS_PAL,
+ .tuner_addr = ADDR_UNSET,
+ /* Notes:
+ - card lacks subsystem ID
+ - stereo variant w/ daughter board with tda9874a @0xb0
+ - Audio Routing:
+ always from tda9874 independent of GPIO (?)
+ external line in: unknown
+ - Other chips: em78p156elp @ 0x96 (probably IR remote control)
+ hef4053 (instead 4052) for unknown function
+ */
+ },
+ [BTTV_BOARD_PACETV] = {
+ .name = "Pace TV & Radio Card",
+ .video_inputs = 4,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ /* Tuner, CVid, SVid, CVid over SVid connector */
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomask = 0,
+ .no_tda7432 = 1,
+ .tuner_type = TUNER_PHILIPS_PAL_I,
+ .tuner_addr = ADDR_UNSET,
+ .has_radio = 1,
+ .pll = PLL_28,
+ /* Bt878, Bt832, FI1246 tuner; no pci subsystem id
+ only internal line out: (4pin header) RGGL
+ Radio must be decoded by msp3410d (not routed through)*/
+ /*
+ .digital_mode = DIGITAL_MODE_CAMERA, todo!
+ */
+ },
+ [BTTV_BOARD_IVC200] = {
+ /* Chris Willing <chris@vislab.usyd.edu.au> */
+ .name = "IVC-200",
+ .video_inputs = 1,
+ /* .audio_inputs= 0, */
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ .svhs = NO_SVHS,
+ .gpiomask = 0xdf,
+ .muxsel = MUXSEL(2),
+ .pll = PLL_28,
+ },
+ [BTTV_BOARD_IVCE8784] = {
+ .name = "IVCE-8784",
+ .video_inputs = 1,
+ /* .audio_inputs= 0, */
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ .svhs = NO_SVHS,
+ .gpiomask = 0xdf,
+ .muxsel = MUXSEL(2),
+ .pll = PLL_28,
+ },
+ [BTTV_BOARD_XGUARD] = {
+ .name = "Grand X-Guard / Trust 814PCI",
+ .video_inputs = 16,
+ /* .audio_inputs= 0, */
+ .svhs = NO_SVHS,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ .gpiomask2 = 0xff,
+ .muxsel = MUXSEL(2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0),
+ .muxsel_hook = xguard_muxsel,
+ .no_msp34xx = 1,
+ .no_tda7432 = 1,
+ .pll = PLL_28,
+ },
+
+ /* ---- card 0x68 ---------------------------------- */
+ [BTTV_BOARD_NEBULA_DIGITV] = {
+ .name = "Nebula Electronics DigiTV",
+ .video_inputs = 1,
+ .svhs = NO_SVHS,
+ .muxsel = MUXSEL(2, 3, 1, 0),
+ .no_msp34xx = 1,
+ .no_tda7432 = 1,
+ .pll = PLL_28,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ .has_dvb = 1,
+ .has_remote = 1,
+ .gpiomask = 0x1b,
+ .no_gpioirq = 1,
+ },
+ [BTTV_BOARD_PV143] = {
+ /* Jorge Boncompte - DTI2 <jorge@dti2.net> */
+ .name = "ProVideo PV143",
+ .video_inputs = 4,
+ /* .audio_inputs= 0, */
+ .svhs = NO_SVHS,
+ .gpiomask = 0,
+ .muxsel = MUXSEL(2, 3, 1, 0),
+ .gpiomux = { 0 },
+ .no_msp34xx = 1,
+ .pll = PLL_28,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_VD009X1_VD011_MINIDIN] = {
+ /* M.Klahr@phytec.de */
+ .name = "PHYTEC VD-009-X1 VD-011 MiniDIN (bt878)",
+ .video_inputs = 4,
+ /* .audio_inputs= 0, */
+ .svhs = 3,
+ .gpiomask = 0x00,
+ .muxsel = MUXSEL(2, 3, 1, 0),
+ .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
+ .pll = PLL_28,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_VD009X1_VD011_COMBI] = {
+ .name = "PHYTEC VD-009-X1 VD-011 Combi (bt878)",
+ .video_inputs = 4,
+ /* .audio_inputs= 0, */
+ .svhs = 3,
+ .gpiomask = 0x00,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
+ .pll = PLL_28,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ },
+
+ /* ---- card 0x6c ---------------------------------- */
+ [BTTV_BOARD_VD009_MINIDIN] = {
+ .name = "PHYTEC VD-009 MiniDIN (bt878)",
+ .video_inputs = 10,
+ /* .audio_inputs= 0, */
+ .svhs = 9,
+ .gpiomask = 0x00,
+ .gpiomask2 = 0x03, /* used for external vodeo mux */
+ .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 0),
+ .muxsel_hook = phytec_muxsel,
+ .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
+ .pll = PLL_28,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_VD009_COMBI] = {
+ .name = "PHYTEC VD-009 Combi (bt878)",
+ .video_inputs = 10,
+ /* .audio_inputs= 0, */
+ .svhs = 9,
+ .gpiomask = 0x00,
+ .gpiomask2 = 0x03, /* used for external vodeo mux */
+ .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1),
+ .muxsel_hook = phytec_muxsel,
+ .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
+ .pll = PLL_28,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_IVC100] = {
+ .name = "IVC-100",
+ .video_inputs = 4,
+ /* .audio_inputs= 0, */
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ .svhs = NO_SVHS,
+ .gpiomask = 0xdf,
+ .muxsel = MUXSEL(2, 3, 1, 0),
+ .pll = PLL_28,
+ },
+ [BTTV_BOARD_IVC120] = {
+ /* IVC-120G - Alan Garfield <alan@fromorbit.com> */
+ .name = "IVC-120G",
+ .video_inputs = 16,
+ /* .audio_inputs= 0, */
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ .svhs = NO_SVHS, /* card has no svhs */
+ .no_msp34xx = 1,
+ .no_tda7432 = 1,
+ .gpiomask = 0x00,
+ .muxsel = MUXSEL(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0),
+ .muxsel_hook = ivc120_muxsel,
+ .pll = PLL_28,
+ },
+
+ /* ---- card 0x70 ---------------------------------- */
+ [BTTV_BOARD_PC_HDTV] = {
+ .name = "pcHDTV HD-2000 TV",
+ .video_inputs = 4,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .muxsel = MUXSEL(2, 3, 1, 0),
+ .tuner_type = TUNER_PHILIPS_FCV1236D,
+ .tuner_addr = ADDR_UNSET,
+ .has_dvb = 1,
+ },
+ [BTTV_BOARD_TWINHAN_DST] = {
+ .name = "Twinhan DST + clones",
+ .no_msp34xx = 1,
+ .no_tda7432 = 1,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ .no_video = 1,
+ .has_dvb = 1,
+ },
+ [BTTV_BOARD_WINFASTVC100] = {
+ .name = "Winfast VC100",
+ .video_inputs = 3,
+ /* .audio_inputs= 0, */
+ .svhs = 1,
+ /* Vid In, SVid In, Vid over SVid in connector */
+ .muxsel = MUXSEL(3, 1, 1, 3),
+ .no_msp34xx = 1,
+ .no_tda7432 = 1,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ .pll = PLL_28,
+ },
+ [BTTV_BOARD_TEV560] = {
+ .name = "Teppro TEV-560/InterVision IV-560",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 3,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 1, 1, 1, 1 },
+ .tuner_type = TUNER_PHILIPS_PAL,
+ .tuner_addr = ADDR_UNSET,
+ .pll = PLL_35,
+ },
+
+ /* ---- card 0x74 ---------------------------------- */
+ [BTTV_BOARD_SIMUS_GVC1100] = {
+ .name = "SIMUS GVC1100",
+ .video_inputs = 4,
+ /* .audio_inputs= 0, */
+ .svhs = NO_SVHS,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ .pll = PLL_28,
+ .muxsel = MUXSEL(2, 2, 2, 2),
+ .gpiomask = 0x3F,
+ .muxsel_hook = gvc1100_muxsel,
+ },
+ [BTTV_BOARD_NGSTV_PLUS] = {
+ /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
+ .name = "NGS NGSTV+",
+ .video_inputs = 3,
+ .svhs = 2,
+ .gpiomask = 0x008007,
+ .muxsel = MUXSEL(2, 3, 0, 0),
+ .gpiomux = { 0, 0, 0, 0 },
+ .gpiomute = 0x000003,
+ .pll = PLL_28,
+ .tuner_type = TUNER_PHILIPS_PAL,
+ .tuner_addr = ADDR_UNSET,
+ .has_remote = 1,
+ },
+ [BTTV_BOARD_LMLBT4] = {
+ /* http://linuxmedialabs.com */
+ .name = "LMLBT4",
+ .video_inputs = 4, /* IN1,IN2,IN3,IN4 */
+ /* .audio_inputs= 0, */
+ .svhs = NO_SVHS,
+ .muxsel = MUXSEL(2, 3, 1, 0),
+ .no_msp34xx = 1,
+ .no_tda7432 = 1,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_TEKRAM_M205] = {
+ /* Helmroos Harri <harri.helmroos@pp.inet.fi> */
+ .name = "Tekram M205 PRO",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .tuner_type = TUNER_PHILIPS_PAL,
+ .tuner_addr = ADDR_UNSET,
+ .svhs = 2,
+ .gpiomask = 0x68,
+ .muxsel = MUXSEL(2, 3, 1),
+ .gpiomux = { 0x68, 0x68, 0x61, 0x61 },
+ .pll = PLL_28,
+ },
+
+ /* ---- card 0x78 ---------------------------------- */
+ [BTTV_BOARD_CONTVFMI] = {
+ /* Javier Cendan Ares <jcendan@lycos.es> */
+ /* bt878 TV + FM without subsystem ID */
+ .name = "Conceptronic CONTVFMi",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 0x008007,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 0, 1, 2, 2 },
+ .gpiomute = 3,
+ .pll = PLL_28,
+ .tuner_type = TUNER_PHILIPS_PAL,
+ .tuner_addr = ADDR_UNSET,
+ .has_remote = 1,
+ .has_radio = 1,
+ },
+ [BTTV_BOARD_PICOLO_TETRA_CHIP] = {
+ /*Eric DEBIEF <debief@telemsa.com>*/
+ /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controlled*/
+ /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the following declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/
+ /*0x79 in bttv.h*/
+ .name = "Euresys Picolo Tetra",
+ .video_inputs = 4,
+ /* .audio_inputs= 0, */
+ .svhs = NO_SVHS,
+ .gpiomask = 0,
+ .gpiomask2 = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
+ .no_msp34xx = 1,
+ .no_tda7432 = 1,
+ /*878A input is always MUX0, see above.*/
+ .muxsel = MUXSEL(2, 2, 2, 2),
+ .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
+ .pll = PLL_28,
+ .muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_SPIRIT_TV] = {
+ /* Spirit TV Tuner from http://spiritmodems.com.au */
+ /* Stafford Goodsell <surge@goliath.homeunix.org> */
+ .name = "Spirit TV Tuner",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 0x0000000f,
+ .muxsel = MUXSEL(2, 1, 1),
+ .gpiomux = { 0x02, 0x00, 0x00, 0x00 },
+ .tuner_type = TUNER_TEMIC_PAL,
+ .tuner_addr = ADDR_UNSET,
+ .no_msp34xx = 1,
+ },
+ [BTTV_BOARD_AVDVBT_771] = {
+ /* Wolfram Joost <wojo@frokaschwei.de> */
+ .name = "AVerMedia AVerTV DVB-T 771",
+ .video_inputs = 2,
+ .svhs = 1,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ .muxsel = MUXSEL(3, 3),
+ .no_msp34xx = 1,
+ .no_tda7432 = 1,
+ .pll = PLL_28,
+ .has_dvb = 1,
+ .no_gpioirq = 1,
+ .has_remote = 1,
+ },
+ /* ---- card 0x7c ---------------------------------- */
+ [BTTV_BOARD_AVDVBT_761] = {
+ /* Matt Jesson <dvb@jesson.eclipse.co.uk> */
+ /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */
+ .name = "AverMedia AverTV DVB-T 761",
+ .video_inputs = 2,
+ .svhs = 1,
+ .muxsel = MUXSEL(3, 1, 2, 0), /* Comp0, S-Video, ?, ? */
+ .no_msp34xx = 1,
+ .no_tda7432 = 1,
+ .pll = PLL_28,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ .has_dvb = 1,
+ .no_gpioirq = 1,
+ .has_remote = 1,
+ },
+ [BTTV_BOARD_MATRIX_VISIONSQ] = {
+ /* andre.schwarz@matrix-vision.de */
+ .name = "MATRIX Vision Sigma-SQ",
+ .video_inputs = 16,
+ /* .audio_inputs= 0, */
+ .svhs = NO_SVHS,
+ .gpiomask = 0x0,
+ .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3),
+ .muxsel_hook = sigmaSQ_muxsel,
+ .gpiomux = { 0 },
+ .no_msp34xx = 1,
+ .pll = PLL_28,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_MATRIX_VISIONSLC] = {
+ /* andre.schwarz@matrix-vision.de */
+ .name = "MATRIX Vision Sigma-SLC",
+ .video_inputs = 4,
+ /* .audio_inputs= 0, */
+ .svhs = NO_SVHS,
+ .gpiomask = 0x0,
+ .muxsel = MUXSEL(2, 2, 2, 2),
+ .muxsel_hook = sigmaSLC_muxsel,
+ .gpiomux = { 0 },
+ .no_msp34xx = 1,
+ .pll = PLL_28,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ },
+ /* BTTV_BOARD_APAC_VIEWCOMP */
+ [BTTV_BOARD_APAC_VIEWCOMP] = {
+ /* Attila Kondoros <attila.kondoros@chello.hu> */
+ /* bt878 TV + FM 0x00000000 subsystem ID */
+ .name = "APAC Viewcomp 878(AMAX)",
+ .video_inputs = 2,
+ /* .audio_inputs= 1, */
+ .svhs = NO_SVHS,
+ .gpiomask = 0xFF,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 2, 0, 0, 0 },
+ .gpiomute = 10,
+ .pll = PLL_28,
+ .tuner_type = TUNER_PHILIPS_PAL,
+ .tuner_addr = ADDR_UNSET,
+ .has_remote = 1, /* miniremote works, see ir-kbd-gpio.c */
+ .has_radio = 1, /* not every card has radio */
+ },
+
+ /* ---- card 0x80 ---------------------------------- */
+ [BTTV_BOARD_DVICO_DVBT_LITE] = {
+ /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
+ .name = "DViCO FusionHDTV DVB-T Lite",
+ .no_msp34xx = 1,
+ .no_tda7432 = 1,
+ .pll = PLL_28,
+ .no_video = 1,
+ .has_dvb = 1,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_VGEAR_MYVCD] = {
+ /* Steven <photon38@pchome.com.tw> */
+ .name = "V-Gear MyVCD",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 0x3f,
+ .muxsel = MUXSEL(2, 3, 1, 0),
+ .gpiomux = {0x31, 0x31, 0x31, 0x31 },
+ .gpiomute = 0x31,
+ .no_msp34xx = 1,
+ .pll = PLL_28,
+ .tuner_type = TUNER_PHILIPS_NTSC_M,
+ .tuner_addr = ADDR_UNSET,
+ .has_radio = 0,
+ },
+ [BTTV_BOARD_SUPER_TV] = {
+ /* Rick C <cryptdragoon@gmail.com> */
+ .name = "Super TV Tuner",
+ .video_inputs = 4,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .muxsel = MUXSEL(2, 3, 1, 0),
+ .tuner_type = TUNER_PHILIPS_NTSC,
+ .tuner_addr = ADDR_UNSET,
+ .gpiomask = 0x008007,
+ .gpiomux = { 0, 0x000001,0,0 },
+ .has_radio = 1,
+ },
+ [BTTV_BOARD_TIBET_CS16] = {
+ /* Chris Fanning <video4linux@haydon.net> */
+ .name = "Tibet Systems 'Progress DVR' CS16",
+ .video_inputs = 16,
+ /* .audio_inputs= 0, */
+ .svhs = NO_SVHS,
+ .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
+ .pll = PLL_28,
+ .no_msp34xx = 1,
+ .no_tda7432 = 1,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ .muxsel_hook = tibetCS16_muxsel,
+ },
+ [BTTV_BOARD_KODICOM_4400R] = {
+ /* Bill Brack <wbrack@mmm.com.hk> */
+ /*
+ * Note that, because of the card's wiring, the "master"
+ * BT878A chip (i.e. the one which controls the analog switch
+ * and must use this card type) is the 2nd one detected. The
+ * other 3 chips should use card type 0x85, whose description
+ * follows this one. There is a EEPROM on the card (which is
+ * connected to the I2C of one of those other chips), but is
+ * not currently handled. There is also a facility for a
+ * "monitor", which is also not currently implemented.
+ */
+ .name = "Kodicom 4400R (master)",
+ .video_inputs = 16,
+ /* .audio_inputs= 0, */
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ .svhs = NO_SVHS,
+ /* GPIO bits 0-9 used for analog switch:
+ * 00 - 03: camera selector
+ * 04 - 06: channel (controller) selector
+ * 07: data (1->on, 0->off)
+ * 08: strobe
+ * 09: reset
+ * bit 16 is input from sync separator for the channel
+ */
+ .gpiomask = 0x0003ff,
+ .no_gpioirq = 1,
+ .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
+ .pll = PLL_28,
+ .no_msp34xx = 1,
+ .no_tda7432 = 1,
+ .muxsel_hook = kodicom4400r_muxsel,
+ },
+ [BTTV_BOARD_KODICOM_4400R_SL] = {
+ /* Bill Brack <wbrack@mmm.com.hk> */
+ /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
+ * one which controls the analog switch, and must use the card type)
+ * is the 2nd one detected. The other 3 chips should use this card
+ * type
+ */
+ .name = "Kodicom 4400R (slave)",
+ .video_inputs = 16,
+ /* .audio_inputs= 0, */
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ .svhs = NO_SVHS,
+ .gpiomask = 0x010000,
+ .no_gpioirq = 1,
+ .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
+ .pll = PLL_28,
+ .no_msp34xx = 1,
+ .no_tda7432 = 1,
+ .muxsel_hook = kodicom4400r_muxsel,
+ },
+ /* ---- card 0x86---------------------------------- */
+ [BTTV_BOARD_ADLINK_RTV24] = {
+ /* Michael Henson <mhenson@clarityvi.com> */
+ /* Adlink RTV24 with special unlock codes */
+ .name = "Adlink RTV24",
+ .video_inputs = 4,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .muxsel = MUXSEL(2, 3, 1, 0),
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .pll = PLL_28,
+ },
+ /* ---- card 0x87---------------------------------- */
+ [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = {
+ /* Michael Krufky <mkrufky@linuxtv.org> */
+ .name = "DViCO FusionHDTV 5 Lite",
+ .tuner_type = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */
+ .tuner_addr = ADDR_UNSET,
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .muxsel = MUXSEL(2, 3, 1),
+ .gpiomask = 0x00e00007,
+ .gpiomux = { 0x00400005, 0, 0x00000001, 0 },
+ .gpiomute = 0x00c00007,
+ .no_msp34xx = 1,
+ .no_tda7432 = 1,
+ .has_dvb = 1,
+ },
+ /* ---- card 0x88---------------------------------- */
+ [BTTV_BOARD_ACORP_Y878F] = {
+ /* Mauro Carvalho Chehab <mchehab@infradead.org> */
+ .name = "Acorp Y878F",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 0x01fe00,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
+ .gpiomute = 0x002000,
+ .pll = PLL_28,
+ .tuner_type = TUNER_YMEC_TVF66T5_B_DFF,
+ .tuner_addr = 0xc1 >>1,
+ .has_radio = 1,
+ },
+ /* ---- card 0x89 ---------------------------------- */
+ [BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = {
+ .name = "Conceptronic CTVFMi v2",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 0x001c0007,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 0, 1, 2, 2 },
+ .gpiomute = 3,
+ .pll = PLL_28,
+ .tuner_type = TUNER_TENA_9533_DI,
+ .tuner_addr = ADDR_UNSET,
+ .has_remote = 1,
+ .has_radio = 1,
+ },
+ /* ---- card 0x8a ---------------------------------- */
+ [BTTV_BOARD_PV_BT878P_2E] = {
+ .name = "Prolink Pixelview PV-BT878P+ (Rev.2E)",
+ .video_inputs = 5,
+ /* .audio_inputs= 1, */
+ .svhs = 3,
+ .has_dig_in = 1,
+ .gpiomask = 0x01fe00,
+ .muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
+ /* .digital_mode= DIGITAL_MODE_CAMERA, */
+ .gpiomux = { 0x00400, 0x10400, 0x04400, 0x80000 },
+ .gpiomute = 0x12400,
+ .no_msp34xx = 1,
+ .pll = PLL_28,
+ .tuner_type = TUNER_LG_PAL_FM,
+ .tuner_addr = ADDR_UNSET,
+ .has_remote = 1,
+ },
+ /* ---- card 0x8b ---------------------------------- */
+ [BTTV_BOARD_PV_M4900] = {
+ /* Sérgio Fortier <sergiofortier@yahoo.com.br> */
+ .name = "Prolink PixelView PlayTV MPEG2 PV-M4900",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 0x3f,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 0x21, 0x20, 0x24, 0x2c },
+ .gpiomute = 0x29,
+ .no_msp34xx = 1,
+ .pll = PLL_28,
+ .tuner_type = TUNER_YMEC_TVF_5533MF,
+ .tuner_addr = ADDR_UNSET,
+ .has_radio = 1,
+ .has_remote = 1,
+ },
+ /* ---- card 0x8c ---------------------------------- */
+ /* Has four Bt878 chips behind a PCI bridge, each chip has:
+ one external BNC composite input (mux 2)
+ three internal composite inputs (unknown muxes)
+ an 18-bit stereo A/D (CS5331A), which has:
+ one external stereo unblanced (RCA) audio connection
+ one (or 3?) internal stereo balanced (XLR) audio connection
+ input is selected via gpio to a 14052B mux
+ (mask=0x300, unbal=0x000, bal=0x100, ??=0x200,0x300)
+ gain is controlled via an X9221A chip on the I2C bus @0x28
+ sample rate is controlled via gpio to an MK1413S
+ (mask=0x3, 32kHz=0x0, 44.1kHz=0x1, 48kHz=0x2, ??=0x3)
+ There is neither a tuner nor an svideo input. */
+ [BTTV_BOARD_OSPREY440] = {
+ .name = "Osprey 440",
+ .video_inputs = 4,
+ /* .audio_inputs= 2, */
+ .svhs = NO_SVHS,
+ .muxsel = MUXSEL(2, 3, 0, 1), /* 3,0,1 are guesses */
+ .gpiomask = 0x303,
+ .gpiomute = 0x000, /* int + 32kHz */
+ .gpiomux = { 0, 0, 0x000, 0x100},
+ .pll = PLL_28,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ .no_msp34xx = 1,
+ .no_tda7432 = 1,
+ },
+ /* ---- card 0x8d ---------------------------------- */
+ [BTTV_BOARD_ASOUND_SKYEYE] = {
+ .name = "Asound Skyeye PCTV",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 15,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 2, 0, 0, 0 },
+ .gpiomute = 1,
+ .pll = PLL_28,
+ .tuner_type = TUNER_PHILIPS_NTSC,
+ .tuner_addr = ADDR_UNSET,
+ },
+ /* ---- card 0x8e ---------------------------------- */
+ [BTTV_BOARD_SABRENT_TVFM] = {
+ .name = "Sabrent TV-FM (bttv version)",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 0x108007,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 100000, 100002, 100002, 100000 },
+ .no_msp34xx = 1,
+ .no_tda7432 = 1,
+ .pll = PLL_28,
+ .tuner_type = TUNER_TNF_5335MF,
+ .tuner_addr = ADDR_UNSET,
+ .has_radio = 1,
+ },
+ /* ---- card 0x8f ---------------------------------- */
+ [BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = {
+ .name = "Hauppauge ImpactVCB (bt878)",
+ .video_inputs = 4,
+ /* .audio_inputs= 0, */
+ .svhs = NO_SVHS,
+ .gpiomask = 0x0f, /* old: 7 */
+ .muxsel = MUXSEL(0, 1, 3, 2), /* Composite 0-3 */
+ .no_msp34xx = 1,
+ .no_tda7432 = 1,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_MACHTV_MAGICTV] = {
+ /* Julian Calaby <julian.calaby@gmail.com>
+ * Slightly different from original MachTV definition (0x60)
+
+ * FIXME: RegSpy says gpiomask should be "0x001c800f", but it
+ * stuffs up remote chip. Bug is a pin on the jaecs is not set
+ * properly (methinks) causing no keyup bits being set */
+
+ .name = "MagicTV", /* rebranded MachTV */
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 7,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 0, 1, 2, 3 },
+ .gpiomute = 4,
+ .tuner_type = TUNER_TEMIC_4009FR5_PAL,
+ .tuner_addr = ADDR_UNSET,
+ .pll = PLL_28,
+ .has_radio = 1,
+ .has_remote = 1,
+ },
+ [BTTV_BOARD_SSAI_SECURITY] = {
+ .name = "SSAI Security Video Interface",
+ .video_inputs = 4,
+ /* .audio_inputs= 0, */
+ .svhs = NO_SVHS,
+ .muxsel = MUXSEL(0, 1, 2, 3),
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_SSAI_ULTRASOUND] = {
+ .name = "SSAI Ultrasound Video Interface",
+ .video_inputs = 2,
+ /* .audio_inputs= 0, */
+ .svhs = 1,
+ .muxsel = MUXSEL(2, 0, 1, 3),
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ },
+ /* ---- card 0x94---------------------------------- */
+ [BTTV_BOARD_DVICO_FUSIONHDTV_2] = {
+ .name = "DViCO FusionHDTV 2",
+ .tuner_type = TUNER_PHILIPS_FCV1236D,
+ .tuner_addr = ADDR_UNSET,
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .muxsel = MUXSEL(2, 3, 1),
+ .gpiomask = 0x00e00007,
+ .gpiomux = { 0x00400005, 0, 0x00000001, 0 },
+ .gpiomute = 0x00c00007,
+ .no_msp34xx = 1,
+ .no_tda7432 = 1,
+ },
+ /* ---- card 0x95---------------------------------- */
+ [BTTV_BOARD_TYPHOON_TVTUNERPCI] = {
+ .name = "Typhoon TV-Tuner PCI (50684)",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 0x3014f,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 0x20001,0x10001, 0, 0 },
+ .gpiomute = 10,
+ .pll = PLL_28,
+ .tuner_type = TUNER_PHILIPS_PAL_I,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_GEOVISION_GV600] = {
+ /* emhn@usb.ve */
+ .name = "Geovision GV-600",
+ .video_inputs = 16,
+ /* .audio_inputs= 0, */
+ .svhs = NO_SVHS,
+ .gpiomask = 0x0,
+ .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
+ .muxsel_hook = geovision_muxsel,
+ .gpiomux = { 0 },
+ .no_msp34xx = 1,
+ .pll = PLL_28,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_KOZUMI_KTV_01C] = {
+ /* Mauro Lacy <mauro@lacy.com.ar>
+ * Based on MagicTV and Conceptronic CONTVFMi */
+
+ .name = "Kozumi KTV-01C",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 0x008007,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 0, 1, 2, 2 }, /* CONTVFMi */
+ .gpiomute = 3, /* CONTVFMi */
+ .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */
+ .tuner_addr = ADDR_UNSET,
+ .pll = PLL_28,
+ .has_radio = 1,
+ .has_remote = 1,
+ },
+ [BTTV_BOARD_ENLTV_FM_2] = {
+ /* Encore TV Tuner Pro ENL TV-FM-2
+ Mauro Carvalho Chehab <mchehab@infradead.org */
+ .name = "Encore ENL TV-FM-2",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ /* bit 6 -> IR disabled
+ bit 18/17 = 00 -> mute
+ 01 -> enable external audio input
+ 10 -> internal audio input (mono?)
+ 11 -> internal audio input
+ */
+ .gpiomask = 0x060040,
+ .muxsel = MUXSEL(2, 3, 3),
+ .gpiomux = { 0x60000, 0x60000, 0x20000, 0x20000 },
+ .gpiomute = 0,
+ .tuner_type = TUNER_TCL_MF02GIP_5N,
+ .tuner_addr = ADDR_UNSET,
+ .pll = PLL_28,
+ .has_radio = 1,
+ .has_remote = 1,
+ },
+ [BTTV_BOARD_VD012] = {
+ /* D.Heer@Phytec.de */
+ .name = "PHYTEC VD-012 (bt878)",
+ .video_inputs = 4,
+ /* .audio_inputs= 0, */
+ .svhs = NO_SVHS,
+ .gpiomask = 0x00,
+ .muxsel = MUXSEL(0, 2, 3, 1),
+ .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
+ .pll = PLL_28,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_VD012_X1] = {
+ /* D.Heer@Phytec.de */
+ .name = "PHYTEC VD-012-X1 (bt878)",
+ .video_inputs = 4,
+ /* .audio_inputs= 0, */
+ .svhs = 3,
+ .gpiomask = 0x00,
+ .muxsel = MUXSEL(2, 3, 1),
+ .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
+ .pll = PLL_28,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_VD012_X2] = {
+ /* D.Heer@Phytec.de */
+ .name = "PHYTEC VD-012-X2 (bt878)",
+ .video_inputs = 4,
+ /* .audio_inputs= 0, */
+ .svhs = 3,
+ .gpiomask = 0x00,
+ .muxsel = MUXSEL(3, 2, 1),
+ .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
+ .pll = PLL_28,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_GEOVISION_GV800S] = {
+ /* Bruno Christo <bchristo@inf.ufsm.br>
+ *
+ * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
+ * 1 audio input per BT878A = 4 audio inputs
+ * 4 video inputs per BT878A = 16 video inputs
+ * This is the first BT878A chip of the GV-800(S). It's the
+ * "master" chip and it controls the video inputs through an
+ * analog multiplexer (a CD22M3494) via some GPIO pins. The
+ * slaves should use card type 0x9e (following this one).
+ * There is a EEPROM on the card which is currently not handled.
+ * The audio input is not working yet.
+ */
+ .name = "Geovision GV-800(S) (master)",
+ .video_inputs = 4,
+ /* .audio_inputs= 1, */
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ .svhs = NO_SVHS,
+ .gpiomask = 0xf107f,
+ .no_gpioirq = 1,
+ .muxsel = MUXSEL(2, 2, 2, 2),
+ .pll = PLL_28,
+ .no_msp34xx = 1,
+ .no_tda7432 = 1,
+ .muxsel_hook = gv800s_muxsel,
+ },
+ [BTTV_BOARD_GEOVISION_GV800S_SL] = {
+ /* Bruno Christo <bchristo@inf.ufsm.br>
+ *
+ * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
+ * 1 audio input per BT878A = 4 audio inputs
+ * 4 video inputs per BT878A = 16 video inputs
+ * The 3 other BT878A chips are "slave" chips of the GV-800(S)
+ * and should use this card type.
+ * The audio input is not working yet.
+ */
+ .name = "Geovision GV-800(S) (slave)",
+ .video_inputs = 4,
+ /* .audio_inputs= 1, */
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ .svhs = NO_SVHS,
+ .gpiomask = 0x00,
+ .no_gpioirq = 1,
+ .muxsel = MUXSEL(2, 2, 2, 2),
+ .pll = PLL_28,
+ .no_msp34xx = 1,
+ .no_tda7432 = 1,
+ .muxsel_hook = gv800s_muxsel,
+ },
+ [BTTV_BOARD_PV183] = {
+ .name = "ProVideo PV183", /* 0x9f */
+ .video_inputs = 2,
+ /* .audio_inputs= 0, */
+ .svhs = NO_SVHS,
+ .gpiomask = 0,
+ .muxsel = MUXSEL(2, 3),
+ .gpiomux = { 0 },
+ .no_msp34xx = 1,
+ .pll = PLL_28,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ },
+ /* ---- card 0xa0---------------------------------- */
+ [BTTV_BOARD_TVT_TD3116] = {
+ .name = "Tongwei Video Technology TD-3116",
+ .video_inputs = 16,
+ .gpiomask = 0xc00ff,
+ .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
+ .muxsel_hook = td3116_muxsel,
+ .svhs = NO_SVHS,
+ .pll = PLL_28,
+ .tuner_type = TUNER_ABSENT,
+ },
+ [BTTV_BOARD_APOSONIC_WDVR] = {
+ .name = "Aposonic W-DVR",
+ .video_inputs = 4,
+ .svhs = NO_SVHS,
+ .muxsel = MUXSEL(2, 3, 1, 0),
+ .tuner_type = TUNER_ABSENT,
+ },
+ [BTTV_BOARD_ADLINK_MPG24] = {
+ /* Adlink MPG24 */
+ .name = "Adlink MPG24",
+ .video_inputs = 1,
+ /* .audio_inputs= 1, */
+ .svhs = NO_SVHS,
+ .muxsel = MUXSEL(2, 2, 2, 2),
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .pll = PLL_28,
+ },
+ [BTTV_BOARD_BT848_CAP_14] = {
+ .name = "Bt848 Capture 14MHz",
+ .video_inputs = 4,
+ .svhs = 2,
+ .muxsel = MUXSEL(2, 3, 1, 0),
+ .pll = PLL_14,
+ .tuner_type = TUNER_ABSENT,
+ },
+ [BTTV_BOARD_CYBERVISION_CV06] = {
+ .name = "CyberVision CV06 (SV)",
+ .video_inputs = 4,
+ /* .audio_inputs= 0, */
+ .svhs = NO_SVHS,
+ .muxsel = MUXSEL(2, 3, 1, 0),
+ .pll = PLL_28,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ },
+ [BTTV_BOARD_KWORLD_VSTREAM_XPERT] = {
+ /* Pojar George <geoubuntu@gmail.com> */
+ .name = "Kworld V-Stream Xpert TV PVR878",
+ .video_inputs = 3,
+ /* .audio_inputs= 1, */
+ .svhs = 2,
+ .gpiomask = 0x001c0007,
+ .muxsel = MUXSEL(2, 3, 1, 1),
+ .gpiomux = { 0, 1, 2, 2 },
+ .gpiomute = 3,
+ .pll = PLL_28,
+ .tuner_type = TUNER_TENA_9533_DI,
+ .tuner_addr = ADDR_UNSET,
+ .has_remote = 1,
+ .has_radio = 1,
+ },
+ /* ---- card 0xa6---------------------------------- */
+ [BTTV_BOARD_PCI_8604PW] = {
+ /* PCI-8604PW with special unlock sequence */
+ .name = "PCI-8604PW",
+ .video_inputs = 2,
+ /* .audio_inputs= 0, */
+ .svhs = NO_SVHS,
+ /* The second input is available on CN4, if populated.
+ * The other 5x2 header (CN2?) connects to the same inputs
+ * as the on-board BNCs */
+ .muxsel = MUXSEL(2, 3),
+ .tuner_type = TUNER_ABSENT,
+ .no_msp34xx = 1,
+ .no_tda7432 = 1,
+ .pll = PLL_35,
+ },
+};
+
+static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
+
+/* ----------------------------------------------------------------------- */
+
+static unsigned char eeprom_data[256];
+
+/*
+ * identify card
+ */
+void bttv_idcard(struct bttv *btv)
+{
+ unsigned int gpiobits;
+ int i,type;
+
+ /* read PCI subsystem ID */
+ btv->cardid = btv->c.pci->subsystem_device << 16;
+ btv->cardid |= btv->c.pci->subsystem_vendor;
+
+ if (0 != btv->cardid && 0xffffffff != btv->cardid) {
+ /* look for the card */
+ for (type = -1, i = 0; cards[i].id != 0; i++)
+ if (cards[i].id == btv->cardid)
+ type = i;
+
+ if (type != -1) {
+ /* found it */
+ pr_info("%d: detected: %s [card=%d], PCI subsystem ID is %04x:%04x\n",
+ btv->c.nr, cards[type].name, cards[type].cardnr,
+ btv->cardid & 0xffff,
+ (btv->cardid >> 16) & 0xffff);
+ btv->c.type = cards[type].cardnr;
+ } else {
+ /* 404 */
+ pr_info("%d: subsystem: %04x:%04x (UNKNOWN)\n",
+ btv->c.nr, btv->cardid & 0xffff,
+ (btv->cardid >> 16) & 0xffff);
+ pr_debug("please mail id, board name and the correct card= insmod option to linux-media@vger.kernel.org\n");
+ }
+ }
+
+ /* let the user override the autodetected type */
+ if (card[btv->c.nr] < bttv_num_tvcards)
+ btv->c.type=card[btv->c.nr];
+
+ /* print which card config we are using */
+ pr_info("%d: using: %s [card=%d,%s]\n",
+ btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type,
+ card[btv->c.nr] < bttv_num_tvcards
+ ? "insmod option" : "autodetected");
+
+ /* overwrite gpio stuff ?? */
+ if (UNSET == audioall && UNSET == audiomux[0])
+ return;
+
+ if (UNSET != audiomux[0]) {
+ gpiobits = 0;
+ for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
+ bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i];
+ gpiobits |= audiomux[i];
+ }
+ } else {
+ gpiobits = audioall;
+ for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
+ bttv_tvcards[btv->c.type].gpiomux[i] = audioall;
+ }
+ }
+ bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
+ pr_info("%d: gpio config override: mask=0x%x, mux=",
+ btv->c.nr, bttv_tvcards[btv->c.type].gpiomask);
+ for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
+ pr_cont("%s0x%x",
+ i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]);
+ }
+ pr_cont("\n");
+}
+
+/*
+ * (most) board specific initialisations goes here
+ */
+
+/* Some Modular Technology cards have an eeprom, but no subsystem ID */
+static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
+{
+ int type = -1;
+
+ if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
+ type = BTTV_BOARD_MODTEC_205;
+ else if (0 == strncmp(eeprom_data+20,"Picolo",7))
+ type = BTTV_BOARD_EURESYS_PICOLO;
+ else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
+ type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */
+
+ if (-1 != type) {
+ btv->c.type = type;
+ pr_info("%d: detected by eeprom: %s [card=%d]\n",
+ btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
+ }
+}
+
+static void flyvideo_gpio(struct bttv *btv)
+{
+ int gpio, has_remote, has_radio, is_capture_only;
+ int is_lr90, has_tda9820_tda9821;
+ int tuner_type = UNSET, ttype;
+
+ gpio_inout(0xffffff, 0);
+ udelay(8); /* without this we would see the 0x1800 mask */
+ gpio = gpio_read();
+ /* FIXME: must restore OUR_EN ??? */
+
+ /* all cards provide GPIO info, some have an additional eeprom
+ * LR50: GPIO coding can be found lower right CP1 .. CP9
+ * CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
+ * GPIO14-12: n.c.
+ * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
+
+ * lowest 3 bytes are remote control codes (no handshake needed)
+ * xxxFFF: No remote control chip soldered
+ * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
+ * Note: Some bits are Audio_Mask !
+ */
+ ttype = (gpio & 0x0f0000) >> 16;
+ switch (ttype) {
+ case 0x0:
+ tuner_type = 2; /* NTSC, e.g. TPI8NSR11P */
+ break;
+ case 0x2:
+ tuner_type = 39; /* LG NTSC (newer TAPC series) TAPC-H701P */
+ break;
+ case 0x4:
+ tuner_type = 5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
+ break;
+ case 0x6:
+ tuner_type = 37; /* LG PAL (newer TAPC series) TAPC-G702P */
+ break;
+ case 0xC:
+ tuner_type = 3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
+ break;
+ default:
+ pr_info("%d: FlyVideo_gpio: unknown tuner type\n", btv->c.nr);
+ break;
+ }
+
+ has_remote = gpio & 0x800000;
+ has_radio = gpio & 0x400000;
+ /* unknown 0x200000;
+ * unknown2 0x100000; */
+ is_capture_only = !(gpio & 0x008000); /* GPIO15 */
+ has_tda9820_tda9821 = !(gpio & 0x004000);
+ is_lr90 = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
+ /*
+ * gpio & 0x001000 output bit for audio routing */
+
+ if (is_capture_only)
+ tuner_type = TUNER_ABSENT; /* No tuner present */
+
+ pr_info("%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
+ btv->c.nr, has_radio ? "yes" : "no",
+ has_remote ? "yes" : "no", tuner_type, gpio);
+ pr_info("%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n",
+ btv->c.nr, is_lr90 ? "yes" : "no",
+ has_tda9820_tda9821 ? "yes" : "no",
+ is_capture_only ? "yes" : "no");
+
+ if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */
+ btv->tuner_type = tuner_type;
+ btv->has_radio = has_radio;
+
+ /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
+ * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
+ * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
+ if (has_tda9820_tda9821)
+ btv->audio_mode_gpio = lt9415_audio;
+ /* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */
+}
+
+static int miro_tunermap[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1,
+ 14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 };
+static int miro_fmtuner[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1,
+ 1,1,1,1, 1,1,1,0, 0,0,0,0, 0,1,0,0 };
+
+static void miro_pinnacle_gpio(struct bttv *btv)
+{
+ int id,msp,gpio;
+ char *info;
+
+ gpio_inout(0xffffff, 0);
+ gpio = gpio_read();
+ id = ((gpio>>10) & 63) -1;
+ msp = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx");
+ if (id < 32) {
+ btv->tuner_type = miro_tunermap[id];
+ if (0 == (gpio & 0x20)) {
+ btv->has_radio = 1;
+ if (!miro_fmtuner[id]) {
+ btv->has_tea575x = 1;
+ btv->tea_gpio.wren = 6;
+ btv->tea_gpio.most = 7;
+ btv->tea_gpio.clk = 8;
+ btv->tea_gpio.data = 9;
+ tea575x_init(btv);
+ }
+ } else {
+ btv->has_radio = 0;
+ }
+ if (-1 != msp) {
+ if (btv->c.type == BTTV_BOARD_MIRO)
+ btv->c.type = BTTV_BOARD_MIROPRO;
+ if (btv->c.type == BTTV_BOARD_PINNACLE)
+ btv->c.type = BTTV_BOARD_PINNACLEPRO;
+ }
+ pr_info("%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
+ btv->c.nr, id+1, btv->tuner_type,
+ !btv->has_radio ? "no" :
+ (btv->has_tea575x ? "tea575x" : "fmtuner"),
+ (-1 == msp) ? "no" : "yes");
+ } else {
+ /* new cards with microtune tuner */
+ id = 63 - id;
+ btv->has_radio = 0;
+ switch (id) {
+ case 1:
+ info = "PAL / mono";
+ btv->tda9887_conf = TDA9887_INTERCARRIER;
+ break;
+ case 2:
+ info = "PAL+SECAM / stereo";
+ btv->has_radio = 1;
+ btv->tda9887_conf = TDA9887_QSS;
+ break;
+ case 3:
+ info = "NTSC / stereo";
+ btv->has_radio = 1;
+ btv->tda9887_conf = TDA9887_QSS;
+ break;
+ case 4:
+ info = "PAL+SECAM / mono";
+ btv->tda9887_conf = TDA9887_QSS;
+ break;
+ case 5:
+ info = "NTSC / mono";
+ btv->tda9887_conf = TDA9887_INTERCARRIER;
+ break;
+ case 6:
+ info = "NTSC / stereo";
+ btv->tda9887_conf = TDA9887_INTERCARRIER;
+ break;
+ case 7:
+ info = "PAL / stereo";
+ btv->tda9887_conf = TDA9887_INTERCARRIER;
+ break;
+ default:
+ info = "oops: unknown card";
+ break;
+ }
+ if (-1 != msp)
+ btv->c.type = BTTV_BOARD_PINNACLEPRO;
+ pr_info("%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
+ btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
+ btv->tuner_type = TUNER_MT2032;
+ }
+}
+
+/* GPIO21 L: Buffer aktiv, H: Buffer inaktiv */
+#define LM1882_SYNC_DRIVE 0x200000L
+
+static void init_ids_eagle(struct bttv *btv)
+{
+ gpio_inout(0xffffff,0xFFFF37);
+ gpio_write(0x200020);
+
+ /* flash strobe inverter ?! */
+ gpio_write(0x200024);
+
+ /* switch sync drive off */
+ gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
+
+ /* set BT848 muxel to 2 */
+ btaor((2)<<5, ~(2<<5), BT848_IFORM);
+}
+
+/* Muxsel helper for the IDS Eagle.
+ * the eagles does not use the standard muxsel-bits but
+ * has its own multiplexer */
+static void eagle_muxsel(struct bttv *btv, unsigned int input)
+{
+ gpio_bits(3, input & 3);
+
+ /* composite */
+ /* set chroma ADC to sleep */
+ btor(BT848_ADC_C_SLEEP, BT848_ADC);
+ /* set to composite video */
+ btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
+ btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
+
+ /* switch sync drive off */
+ gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
+}
+
+static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
+{
+ static const int masks[] = {0x30, 0x01, 0x12, 0x23};
+ gpio_write(masks[input%4]);
+}
+
+/* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
+ alarms output
+
+ GPIObit | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
+ assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1| | |
+
+ IN - sensor inputs, INx - sensor inputs and TI XORed together
+ O1,O2,O3 - alarm outputs (relays)
+
+ OUT ENABLE 1 1 0 . 1 1 0 0 . 0 0 0 0 = 0x6C0
+
+*/
+
+static void init_lmlbt4x(struct bttv *btv)
+{
+ pr_debug("LMLBT4x init\n");
+ btwrite(0x000000, BT848_GPIO_REG_INP);
+ gpio_inout(0xffffff, 0x0006C0);
+ gpio_write(0x000000);
+}
+
+static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
+{
+ unsigned int inmux = input % 8;
+ gpio_inout( 0xf, 0xf );
+ gpio_bits( 0xf, inmux );
+}
+
+static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
+{
+ unsigned int inmux = input % 4;
+ gpio_inout( 3<<9, 3<<9 );
+ gpio_bits( 3<<9, inmux<<9 );
+}
+
+static void geovision_muxsel(struct bttv *btv, unsigned int input)
+{
+ unsigned int inmux = input % 16;
+ gpio_inout(0xf, 0xf);
+ gpio_bits(0xf, inmux);
+}
+
+/*
+ * The TD3116 has 2 74HC4051 muxes wired to the MUX0 input of a bt878.
+ * The first 74HC4051 has the lower 8 inputs, the second one the higher 8.
+ * The muxes are controlled via a 74HC373 latch which is connected to
+ * GPIOs 0-7. GPIO 18 is connected to the LE signal of the latch.
+ * Q0 of the latch is connected to the Enable (~E) input of the first
+ * 74HC4051. Q1 - Q3 are connected to S0 - S2 of the same 74HC4051.
+ * Q4 - Q7 are connected to the second 74HC4051 in the same way.
+ */
+
+static void td3116_latch_value(struct bttv *btv, u32 value)
+{
+ gpio_bits((1<<18) | 0xff, value);
+ gpio_bits((1<<18) | 0xff, (1<<18) | value);
+ udelay(1);
+ gpio_bits((1<<18) | 0xff, value);
+}
+
+static void td3116_muxsel(struct bttv *btv, unsigned int input)
+{
+ u32 value;
+ u32 highbit;
+
+ highbit = (input & 0x8) >> 3 ;
+
+ /* Disable outputs and set value in the mux */
+ value = 0x11; /* Disable outputs */
+ value |= ((input & 0x7) << 1) << (4 * highbit);
+ td3116_latch_value(btv, value);
+
+ /* Enable the correct output */
+ value &= ~0x11;
+ value |= ((highbit ^ 0x1) << 4) | highbit;
+ td3116_latch_value(btv, value);
+}
+
+/* ----------------------------------------------------------------------- */
+
+static void bttv_reset_audio(struct bttv *btv)
+{
+ /*
+ * BT878A has a audio-reset register.
+ * 1. This register is an audio reset function but it is in
+ * function-0 (video capture) address space.
+ * 2. It is enough to do this once per power-up of the card.
+ * 3. There is a typo in the Conexant doc -- it is not at
+ * 0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
+ * --//Shrikumar 030609
+ */
+ if (btv->id != 878)
+ return;
+
+ if (bttv_debug)
+ pr_debug("%d: BT878A ARESET\n", btv->c.nr);
+ btwrite((1<<7), 0x058);
+ udelay(10);
+ btwrite( 0, 0x058);
+}
+
+/* initialization part one -- before registering i2c bus */
+void bttv_init_card1(struct bttv *btv)
+{
+ switch (btv->c.type) {
+ case BTTV_BOARD_HAUPPAUGE:
+ case BTTV_BOARD_HAUPPAUGE878:
+ boot_msp34xx(btv,5);
+ break;
+ case BTTV_BOARD_VOODOOTV_200:
+ case BTTV_BOARD_VOODOOTV_FM:
+ boot_msp34xx(btv,20);
+ break;
+ case BTTV_BOARD_AVERMEDIA98:
+ boot_msp34xx(btv,11);
+ break;
+ case BTTV_BOARD_HAUPPAUGEPVR:
+ pvr_boot(btv);
+ break;
+ case BTTV_BOARD_TWINHAN_DST:
+ case BTTV_BOARD_AVDVBT_771:
+ case BTTV_BOARD_PINNACLESAT:
+ btv->use_i2c_hw = 1;
+ break;
+ case BTTV_BOARD_ADLINK_RTV24:
+ init_RTV24( btv );
+ break;
+ case BTTV_BOARD_PCI_8604PW:
+ init_PCI8604PW(btv);
+ break;
+
+ }
+ if (!bttv_tvcards[btv->c.type].has_dvb)
+ bttv_reset_audio(btv);
+}
+
+/* initialization part two -- after registering i2c bus */
+void bttv_init_card2(struct bttv *btv)
+{
+ btv->tuner_type = UNSET;
+
+ if (BTTV_BOARD_UNKNOWN == btv->c.type) {
+ bttv_readee(btv,eeprom_data,0xa0);
+ identify_by_eeprom(btv,eeprom_data);
+ }
+
+ switch (btv->c.type) {
+ case BTTV_BOARD_MIRO:
+ case BTTV_BOARD_MIROPRO:
+ case BTTV_BOARD_PINNACLE:
+ case BTTV_BOARD_PINNACLEPRO:
+ /* miro/pinnacle */
+ miro_pinnacle_gpio(btv);
+ break;
+ case BTTV_BOARD_FLYVIDEO_98:
+ case BTTV_BOARD_MAXI:
+ case BTTV_BOARD_LIFE_FLYKIT:
+ case BTTV_BOARD_FLYVIDEO:
+ case BTTV_BOARD_TYPHOON_TVIEW:
+ case BTTV_BOARD_CHRONOS_VS2:
+ case BTTV_BOARD_FLYVIDEO_98FM:
+ case BTTV_BOARD_FLYVIDEO2000:
+ case BTTV_BOARD_FLYVIDEO98EZ:
+ case BTTV_BOARD_CONFERENCETV:
+ case BTTV_BOARD_LIFETEC_9415:
+ flyvideo_gpio(btv);
+ break;
+ case BTTV_BOARD_HAUPPAUGE:
+ case BTTV_BOARD_HAUPPAUGE878:
+ case BTTV_BOARD_HAUPPAUGEPVR:
+ /* pick up some config infos from the eeprom */
+ bttv_readee(btv,eeprom_data,0xa0);
+ hauppauge_eeprom(btv);
+ break;
+ case BTTV_BOARD_AVERMEDIA98:
+ case BTTV_BOARD_AVPHONE98:
+ bttv_readee(btv,eeprom_data,0xa0);
+ avermedia_eeprom(btv);
+ break;
+ case BTTV_BOARD_PXC200:
+ init_PXC200(btv);
+ break;
+ case BTTV_BOARD_PICOLO_TETRA_CHIP:
+ picolo_tetra_init(btv);
+ break;
+ case BTTV_BOARD_VHX:
+ btv->has_radio = 1;
+ btv->has_tea575x = 1;
+ btv->tea_gpio.wren = 5;
+ btv->tea_gpio.most = 6;
+ btv->tea_gpio.clk = 3;
+ btv->tea_gpio.data = 4;
+ tea575x_init(btv);
+ break;
+ case BTTV_BOARD_VOBIS_BOOSTAR:
+ case BTTV_BOARD_TERRATV:
+ terratec_active_radio_upgrade(btv);
+ break;
+ case BTTV_BOARD_MAGICTVIEW061:
+ if (btv->cardid == 0x3002144f) {
+ btv->has_radio=1;
+ pr_info("%d: radio detected by subsystem id (CPH05x)\n",
+ btv->c.nr);
+ }
+ break;
+ case BTTV_BOARD_STB2:
+ if (btv->cardid == 0x3060121a) {
+ /* Fix up entry for 3DFX VoodooTV 100,
+ which is an OEM STB card variant. */
+ btv->has_radio=0;
+ btv->tuner_type=TUNER_TEMIC_NTSC;
+ }
+ break;
+ case BTTV_BOARD_OSPREY1x0:
+ case BTTV_BOARD_OSPREY1x0_848:
+ case BTTV_BOARD_OSPREY101_848:
+ case BTTV_BOARD_OSPREY1x1:
+ case BTTV_BOARD_OSPREY1x1_SVID:
+ case BTTV_BOARD_OSPREY2xx:
+ case BTTV_BOARD_OSPREY2x0_SVID:
+ case BTTV_BOARD_OSPREY2x0:
+ case BTTV_BOARD_OSPREY440:
+ case BTTV_BOARD_OSPREY500:
+ case BTTV_BOARD_OSPREY540:
+ case BTTV_BOARD_OSPREY2000:
+ bttv_readee(btv,eeprom_data,0xa0);
+ osprey_eeprom(btv, eeprom_data);
+ break;
+ case BTTV_BOARD_IDS_EAGLE:
+ init_ids_eagle(btv);
+ break;
+ case BTTV_BOARD_MODTEC_205:
+ bttv_readee(btv,eeprom_data,0xa0);
+ modtec_eeprom(btv);
+ break;
+ case BTTV_BOARD_LMLBT4:
+ init_lmlbt4x(btv);
+ break;
+ case BTTV_BOARD_TIBET_CS16:
+ tibetCS16_init(btv);
+ break;
+ case BTTV_BOARD_KODICOM_4400R:
+ kodicom4400r_init(btv);
+ break;
+ case BTTV_BOARD_GEOVISION_GV800S:
+ gv800s_init(btv);
+ break;
+ }
+
+ /* pll configuration */
+ if (!(btv->id==848 && btv->revision==0x11)) {
+ /* defaults from card list */
+ if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
+ btv->pll.pll_ifreq=28636363;
+ btv->pll.pll_crystal=BT848_IFORM_XT0;
+ }
+ if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
+ btv->pll.pll_ifreq=35468950;
+ btv->pll.pll_crystal=BT848_IFORM_XT1;
+ }
+ if (PLL_14 == bttv_tvcards[btv->c.type].pll) {
+ btv->pll.pll_ifreq = 14318181;
+ btv->pll.pll_crystal = BT848_IFORM_XT0;
+ }
+ /* insmod options can override */
+ switch (pll[btv->c.nr]) {
+ case 0: /* none */
+ btv->pll.pll_crystal = 0;
+ btv->pll.pll_ifreq = 0;
+ btv->pll.pll_ofreq = 0;
+ break;
+ case 1: /* 28 MHz */
+ case 28:
+ btv->pll.pll_ifreq = 28636363;
+ btv->pll.pll_ofreq = 0;
+ btv->pll.pll_crystal = BT848_IFORM_XT0;
+ break;
+ case 2: /* 35 MHz */
+ case 35:
+ btv->pll.pll_ifreq = 35468950;
+ btv->pll.pll_ofreq = 0;
+ btv->pll.pll_crystal = BT848_IFORM_XT1;
+ break;
+ case 3: /* 14 MHz */
+ case 14:
+ btv->pll.pll_ifreq = 14318181;
+ btv->pll.pll_ofreq = 0;
+ btv->pll.pll_crystal = BT848_IFORM_XT0;
+ break;
+ }
+ }
+ btv->pll.pll_current = -1;
+
+ /* tuner configuration (from card list / autodetect / insmod option) */
+ if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
+ if (UNSET == btv->tuner_type)
+ btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
+ if (UNSET != tuner[btv->c.nr])
+ btv->tuner_type = tuner[btv->c.nr];
+
+ if (btv->tuner_type == TUNER_ABSENT)
+ pr_info("%d: tuner absent\n", btv->c.nr);
+ else if (btv->tuner_type == UNSET)
+ pr_warn("%d: tuner type unset\n", btv->c.nr);
+ else
+ pr_info("%d: tuner type=%d\n", btv->c.nr, btv->tuner_type);
+
+ if (autoload != UNSET) {
+ pr_warn("%d: the autoload option is obsolete\n", btv->c.nr);
+ pr_warn("%d: use option msp3400, tda7432 or tvaudio to override which audio module should be used\n",
+ btv->c.nr);
+ }
+
+ if (UNSET == btv->tuner_type)
+ btv->tuner_type = TUNER_ABSENT;
+
+ btv->dig = bttv_tvcards[btv->c.type].has_dig_in ?
+ bttv_tvcards[btv->c.type].video_inputs - 1 : UNSET;
+ btv->svhs = bttv_tvcards[btv->c.type].svhs == NO_SVHS ?
+ UNSET : bttv_tvcards[btv->c.type].svhs;
+ if (svhs[btv->c.nr] != UNSET)
+ btv->svhs = svhs[btv->c.nr];
+ if (remote[btv->c.nr] != UNSET)
+ btv->has_remote = remote[btv->c.nr];
+
+ if (bttv_tvcards[btv->c.type].has_radio)
+ btv->has_radio = 1;
+ if (bttv_tvcards[btv->c.type].has_remote)
+ btv->has_remote = 1;
+ if (!bttv_tvcards[btv->c.type].no_gpioirq)
+ btv->gpioirq = 1;
+ if (bttv_tvcards[btv->c.type].volume_gpio)
+ btv->volume_gpio = bttv_tvcards[btv->c.type].volume_gpio;
+ if (bttv_tvcards[btv->c.type].audio_mode_gpio)
+ btv->audio_mode_gpio = bttv_tvcards[btv->c.type].audio_mode_gpio;
+
+ if (btv->tuner_type == TUNER_ABSENT)
+ return; /* no tuner or related drivers to load */
+
+ if (btv->has_saa6588 || saa6588[btv->c.nr]) {
+ /* Probe for RDS receiver chip */
+ static const unsigned short addrs[] = {
+ 0x20 >> 1,
+ 0x22 >> 1,
+ I2C_CLIENT_END
+ };
+ struct v4l2_subdev *sd;
+
+ sd = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
+ &btv->c.i2c_adap, "saa6588", 0, addrs);
+ btv->has_saa6588 = (sd != NULL);
+ }
+
+ /* try to detect audio/fader chips */
+
+ /* First check if the user specified the audio chip via a module
+ option. */
+
+ switch (audiodev[btv->c.nr]) {
+ case -1:
+ return; /* do not load any audio module */
+
+ case 0: /* autodetect */
+ break;
+
+ case 1: {
+ /* The user specified that we should probe for msp3400 */
+ static const unsigned short addrs[] = {
+ I2C_ADDR_MSP3400 >> 1,
+ I2C_ADDR_MSP3400_ALT >> 1,
+ I2C_CLIENT_END
+ };
+
+ btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
+ &btv->c.i2c_adap, "msp3400", 0, addrs);
+ if (btv->sd_msp34xx)
+ return;
+ goto no_audio;
+ }
+
+ case 2: {
+ /* The user specified that we should probe for tda7432 */
+ static const unsigned short addrs[] = {
+ I2C_ADDR_TDA7432 >> 1,
+ I2C_CLIENT_END
+ };
+
+ if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
+ &btv->c.i2c_adap, "tda7432", 0, addrs))
+ return;
+ goto no_audio;
+ }
+
+ case 3: {
+ /* The user specified that we should probe for tvaudio */
+ btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
+ &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
+ if (btv->sd_tvaudio)
+ return;
+ goto no_audio;
+ }
+
+ default:
+ pr_warn("%d: unknown audiodev value!\n", btv->c.nr);
+ return;
+ }
+
+ /* There were no overrides, so now we try to discover this through the
+ card definition */
+
+ /* probe for msp3400 first: this driver can detect whether or not
+ it really is a msp3400, so it will return NULL when the device
+ found is really something else (e.g. a tea6300). */
+ if (!bttv_tvcards[btv->c.type].no_msp34xx) {
+ btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
+ &btv->c.i2c_adap, "msp3400",
+ 0, I2C_ADDRS(I2C_ADDR_MSP3400 >> 1));
+ } else if (bttv_tvcards[btv->c.type].msp34xx_alt) {
+ btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
+ &btv->c.i2c_adap, "msp3400",
+ 0, I2C_ADDRS(I2C_ADDR_MSP3400_ALT >> 1));
+ }
+
+ /* If we found a msp34xx, then we're done. */
+ if (btv->sd_msp34xx)
+ return;
+
+ /* Now see if we can find one of the tvaudio devices. */
+ btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
+ &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
+ if (btv->sd_tvaudio) {
+ /* There may be two tvaudio chips on the card, so try to
+ find another. */
+ v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
+ &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
+ }
+
+ /* it might also be a tda7432. */
+ if (!bttv_tvcards[btv->c.type].no_tda7432) {
+ static const unsigned short addrs[] = {
+ I2C_ADDR_TDA7432 >> 1,
+ I2C_CLIENT_END
+ };
+
+ btv->sd_tda7432 = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
+ &btv->c.i2c_adap, "tda7432", 0, addrs);
+ if (btv->sd_tda7432)
+ return;
+ }
+ if (btv->sd_tvaudio)
+ return;
+
+no_audio:
+ pr_warn("%d: audio absent, no audio device found!\n", btv->c.nr);
+}
+
+
+/* initialize the tuner */
+void bttv_init_tuner(struct bttv *btv)
+{
+ int addr = ADDR_UNSET;
+
+ if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
+ addr = bttv_tvcards[btv->c.type].tuner_addr;
+
+ if (btv->tuner_type != TUNER_ABSENT) {
+ struct tuner_setup tun_setup;
+
+ /* Load tuner module before issuing tuner config call! */
+ if (btv->has_radio)
+ v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
+ &btv->c.i2c_adap, "tuner",
+ 0, v4l2_i2c_tuner_addrs(ADDRS_RADIO));
+ v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
+ &btv->c.i2c_adap, "tuner",
+ 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
+ v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
+ &btv->c.i2c_adap, "tuner",
+ 0, v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
+
+ tun_setup.mode_mask = T_ANALOG_TV;
+ tun_setup.type = btv->tuner_type;
+ tun_setup.addr = addr;
+
+ if (btv->has_radio)
+ tun_setup.mode_mask |= T_RADIO;
+
+ bttv_call_all(btv, tuner, s_type_addr, &tun_setup);
+ }
+
+ if (btv->tda9887_conf) {
+ struct v4l2_priv_tun_config tda9887_cfg;
+
+ tda9887_cfg.tuner = TUNER_TDA9887;
+ tda9887_cfg.priv = &btv->tda9887_conf;
+
+ bttv_call_all(btv, tuner, s_config, &tda9887_cfg);
+ }
+}
+
+/* ----------------------------------------------------------------------- */
+
+static void modtec_eeprom(struct bttv *btv)
+{
+ if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
+ btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
+ pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
+ btv->c.nr, &eeprom_data[0x1e]);
+ } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
+ btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
+ pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
+ btv->c.nr, &eeprom_data[0x1e]);
+ } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
+ btv->tuner_type=TUNER_PHILIPS_NTSC;
+ pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
+ btv->c.nr, &eeprom_data[0x1e]);
+ } else {
+ pr_info("%d: Modtec: Unknown TunerString: %s\n",
+ btv->c.nr, &eeprom_data[0x1e]);
+ }
+}
+
+static void hauppauge_eeprom(struct bttv *btv)
+{
+ struct tveeprom tv;
+
+ tveeprom_hauppauge_analog(&btv->i2c_client, &tv, eeprom_data);
+ btv->tuner_type = tv.tuner_type;
+ btv->has_radio = tv.has_radio;
+
+ pr_info("%d: Hauppauge eeprom indicates model#%d\n",
+ btv->c.nr, tv.model);
+
+ /*
+ * Some of the 878 boards have duplicate PCI IDs. Switch the board
+ * type based on model #.
+ */
+ if(tv.model == 64900) {
+ pr_info("%d: Switching board type from %s to %s\n",
+ btv->c.nr,
+ bttv_tvcards[btv->c.type].name,
+ bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
+ btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB;
+ }
+
+ /* The 61334 needs the msp3410 to do the radio demod to get sound */
+ if (tv.model == 61334)
+ btv->radio_uses_msp_demodulator = 1;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static void bttv_tea575x_set_pins(struct snd_tea575x *tea, u8 pins)
+{
+ struct bttv *btv = tea->private_data;
+ struct bttv_tea575x_gpio gpio = btv->tea_gpio;
+ u16 val = 0;
+
+ val |= (pins & TEA575X_DATA) ? (1 << gpio.data) : 0;
+ val |= (pins & TEA575X_CLK) ? (1 << gpio.clk) : 0;
+ val |= (pins & TEA575X_WREN) ? (1 << gpio.wren) : 0;
+
+ gpio_bits((1 << gpio.data) | (1 << gpio.clk) | (1 << gpio.wren), val);
+ if (btv->mbox_ior) {
+ /* IOW and CSEL active */
+ gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
+ udelay(5);
+ /* all inactive */
+ gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
+ btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
+ }
+}
+
+static u8 bttv_tea575x_get_pins(struct snd_tea575x *tea)
+{
+ struct bttv *btv = tea->private_data;
+ struct bttv_tea575x_gpio gpio = btv->tea_gpio;
+ u8 ret = 0;
+ u16 val;
+
+ if (btv->mbox_ior) {
+ /* IOR and CSEL active */
+ gpio_bits(btv->mbox_ior | btv->mbox_csel, 0);
+ udelay(5);
+ }
+ val = gpio_read();
+ if (btv->mbox_ior) {
+ /* all inactive */
+ gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
+ btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
+ }
+
+ if (val & (1 << gpio.data))
+ ret |= TEA575X_DATA;
+ if (val & (1 << gpio.most))
+ ret |= TEA575X_MOST;
+
+ return ret;
+}
+
+static void bttv_tea575x_set_direction(struct snd_tea575x *tea, bool output)
+{
+ struct bttv *btv = tea->private_data;
+ struct bttv_tea575x_gpio gpio = btv->tea_gpio;
+ u32 mask = (1 << gpio.clk) | (1 << gpio.wren) | (1 << gpio.data) |
+ (1 << gpio.most);
+
+ if (output)
+ gpio_inout(mask, (1 << gpio.data) | (1 << gpio.clk) |
+ (1 << gpio.wren));
+ else
+ gpio_inout(mask, (1 << gpio.clk) | (1 << gpio.wren));
+}
+
+static struct snd_tea575x_ops bttv_tea_ops = {
+ .set_pins = bttv_tea575x_set_pins,
+ .get_pins = bttv_tea575x_get_pins,
+ .set_direction = bttv_tea575x_set_direction,
+};
+
+static int tea575x_init(struct bttv *btv)
+{
+ btv->tea.private_data = btv;
+ btv->tea.ops = &bttv_tea_ops;
+ if (!snd_tea575x_hw_init(&btv->tea)) {
+ pr_info("%d: detected TEA575x radio\n", btv->c.nr);
+ btv->tea.mute = false;
+ return 0;
+ }
+
+ btv->has_tea575x = 0;
+ btv->has_radio = 0;
+
+ return -ENODEV;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static int terratec_active_radio_upgrade(struct bttv *btv)
+{
+ btv->has_radio = 1;
+ btv->has_tea575x = 1;
+ btv->tea_gpio.wren = 4;
+ btv->tea_gpio.most = 5;
+ btv->tea_gpio.clk = 3;
+ btv->tea_gpio.data = 2;
+
+ btv->mbox_iow = 1 << 8;
+ btv->mbox_ior = 1 << 9;
+ btv->mbox_csel = 1 << 10;
+
+ if (!tea575x_init(btv)) {
+ pr_info("%d: Terratec Active Radio Upgrade found\n", btv->c.nr);
+ btv->has_saa6588 = 1;
+ }
+
+ return 0;
+}
+
+
+/* ----------------------------------------------------------------------- */
+
+/*
+ * minimal bootstrap for the WinTV/PVR -- upload altera firmware.
+ *
+ * The hcwamc.rbf firmware file is on the Hauppauge driver CD. Have
+ * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
+ * unpacked with unzip).
+ */
+#define PVR_GPIO_DELAY 10
+
+#define BTTV_ALT_DATA 0x000001
+#define BTTV_ALT_DCLK 0x100000
+#define BTTV_ALT_NCONFIG 0x800000
+
+static int pvr_altera_load(struct bttv *btv, const u8 *micro, u32 microlen)
+{
+ u32 n;
+ u8 bits;
+ int i;
+
+ gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
+ gpio_write(0);
+ udelay(PVR_GPIO_DELAY);
+
+ gpio_write(BTTV_ALT_NCONFIG);
+ udelay(PVR_GPIO_DELAY);
+
+ for (n = 0; n < microlen; n++) {
+ bits = micro[n];
+ for (i = 0 ; i < 8 ; i++) {
+ gpio_bits(BTTV_ALT_DCLK,0);
+ if (bits & 0x01)
+ gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
+ else
+ gpio_bits(BTTV_ALT_DATA,0);
+ gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
+ bits >>= 1;
+ }
+ }
+ gpio_bits(BTTV_ALT_DCLK,0);
+ udelay(PVR_GPIO_DELAY);
+
+ /* begin Altera init loop (Not necessary,but doesn't hurt) */
+ for (i = 0 ; i < 30 ; i++) {
+ gpio_bits(BTTV_ALT_DCLK,0);
+ gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
+ }
+ gpio_bits(BTTV_ALT_DCLK,0);
+ return 0;
+}
+
+static int pvr_boot(struct bttv *btv)
+{
+ const struct firmware *fw_entry;
+ int rc;
+
+ rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
+ if (rc != 0) {
+ pr_warn("%d: no altera firmware [via hotplug]\n", btv->c.nr);
+ return rc;
+ }
+ rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
+ pr_info("%d: altera firmware upload %s\n",
+ btv->c.nr, (rc < 0) ? "failed" : "ok");
+ release_firmware(fw_entry);
+ return rc;
+}
+
+/* ----------------------------------------------------------------------- */
+/* some osprey specific stuff */
+
+static void osprey_eeprom(struct bttv *btv, const u8 ee[256])
+{
+ int i;
+ u32 serial = 0;
+ int cardid = -1;
+
+ /* This code will nevery actually get called in this case.... */
+ if (btv->c.type == BTTV_BOARD_UNKNOWN) {
+ /* this might be an antique... check for MMAC label in eeprom */
+ if (!strncmp(ee, "MMAC", 4)) {
+ u8 checksum = 0;
+ for (i = 0; i < 21; i++)
+ checksum += ee[i];
+ if (checksum != ee[21])
+ return;
+ cardid = BTTV_BOARD_OSPREY1x0_848;
+ for (i = 12; i < 21; i++)
+ serial *= 10, serial += ee[i] - '0';
+ }
+ } else {
+ unsigned short type;
+
+ for (i = 4 * 16; i < 8 * 16; i += 16) {
+ u16 checksum = (__force u16)ip_compute_csum(ee + i, 16);
+
+ if ((checksum & 0xff) + (checksum >> 8) == 0xff)
+ break;
+ }
+ if (i >= 8*16)
+ return;
+ ee += i;
+
+ /* found a valid descriptor */
+ type = get_unaligned_be16((__be16 *)(ee+4));
+
+ switch(type) {
+ /* 848 based */
+ case 0x0004:
+ cardid = BTTV_BOARD_OSPREY1x0_848;
+ break;
+ case 0x0005:
+ cardid = BTTV_BOARD_OSPREY101_848;
+ break;
+
+ /* 878 based */
+ case 0x0012:
+ case 0x0013:
+ cardid = BTTV_BOARD_OSPREY1x0;
+ break;
+ case 0x0014:
+ case 0x0015:
+ cardid = BTTV_BOARD_OSPREY1x1;
+ break;
+ case 0x0016:
+ case 0x0017:
+ case 0x0020:
+ cardid = BTTV_BOARD_OSPREY1x1_SVID;
+ break;
+ case 0x0018:
+ case 0x0019:
+ case 0x001E:
+ case 0x001F:
+ cardid = BTTV_BOARD_OSPREY2xx;
+ break;
+ case 0x001A:
+ case 0x001B:
+ cardid = BTTV_BOARD_OSPREY2x0_SVID;
+ break;
+ case 0x0040:
+ cardid = BTTV_BOARD_OSPREY500;
+ break;
+ case 0x0050:
+ case 0x0056:
+ cardid = BTTV_BOARD_OSPREY540;
+ /* bttv_osprey_540_init(btv); */
+ break;
+ case 0x0060:
+ case 0x0070:
+ case 0x00A0:
+ cardid = BTTV_BOARD_OSPREY2x0;
+ /* enable output on select control lines */
+ gpio_inout(0xffffff,0x000303);
+ break;
+ case 0x00D8:
+ cardid = BTTV_BOARD_OSPREY440;
+ break;
+ default:
+ /* unknown...leave generic, but get serial # */
+ pr_info("%d: osprey eeprom: unknown card type 0x%04x\n",
+ btv->c.nr, type);
+ break;
+ }
+ serial = get_unaligned_be32((__be32 *)(ee+6));
+ }
+
+ pr_info("%d: osprey eeprom: card=%d '%s' serial=%u\n",
+ btv->c.nr, cardid,
+ cardid > 0 ? bttv_tvcards[cardid].name : "Unknown", serial);
+
+ if (cardid<0 || btv->c.type == cardid)
+ return;
+
+ /* card type isn't set correctly */
+ if (card[btv->c.nr] < bttv_num_tvcards) {
+ pr_warn("%d: osprey eeprom: Not overriding user specified card type\n",
+ btv->c.nr);
+ } else {
+ pr_info("%d: osprey eeprom: Changing card type from %d to %d\n",
+ btv->c.nr, btv->c.type, cardid);
+ btv->c.type = cardid;
+ }
+}
+
+/* ----------------------------------------------------------------------- */
+/* AVermedia specific stuff, from bktr_card.c */
+
+static int tuner_0_table[] = {
+ TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL /* PAL-BG*/,
+ TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL /* PAL-I*/,
+ TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL,
+ TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
+ TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
+ TUNER_PHILIPS_FM1216ME_MK3 };
+
+static int tuner_1_table[] = {
+ TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL,
+ TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
+ TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
+ TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */
+ TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
+
+static void avermedia_eeprom(struct bttv *btv)
+{
+ int tuner_make, tuner_tv_fm, tuner_format, tuner_type = 0;
+
+ tuner_make = (eeprom_data[0x41] & 0x7);
+ tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3;
+ tuner_format = (eeprom_data[0x42] & 0xf0) >> 4;
+ btv->has_remote = (eeprom_data[0x42] & 0x01);
+
+ if (tuner_make == 0 || tuner_make == 2)
+ if (tuner_format <= 0x0a)
+ tuner_type = tuner_0_table[tuner_format];
+ if (tuner_make == 1)
+ if (tuner_format <= 9)
+ tuner_type = tuner_1_table[tuner_format];
+
+ if (tuner_make == 4)
+ if (tuner_format == 0x09)
+ tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
+
+ pr_info("%d: Avermedia eeprom[0x%02x%02x]: tuner=",
+ btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]);
+ if (tuner_type) {
+ btv->tuner_type = tuner_type;
+ pr_cont("%d", tuner_type);
+ } else
+ pr_cont("Unknown type");
+ pr_cont(" radio:%s remote control:%s\n",
+ tuner_tv_fm ? "yes" : "no",
+ btv->has_remote ? "yes" : "no");
+}
+
+/*
+ * For Voodoo TV/FM and Voodoo 200. These cards' tuners use a TDA9880
+ * analog demod, which is not I2C controlled like the newer and more common
+ * TDA9887 series. Instead is has two tri-state input pins, S0 and S1,
+ * that control the IF for the video and audio. Apparently, bttv GPIO
+ * 0x10000 is connected to S0. S0 low selects a 38.9 MHz VIF for B/G/D/K/I
+ * (i.e., PAL) while high selects 45.75 MHz for M/N (i.e., NTSC).
+ */
+u32 bttv_tda9880_setnorm(struct bttv *btv, u32 gpiobits)
+{
+
+ if (btv->audio_input == TVAUDIO_INPUT_TUNER) {
+ if (bttv_tvnorms[btv->tvnorm].v4l2_id & V4L2_STD_MN)
+ gpiobits |= 0x10000;
+ else
+ gpiobits &= ~0x10000;
+ }
+
+ gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpiobits);
+ return gpiobits;
+}
+
+
+/*
+ * reset/enable the MSP on some Hauppauge cards
+ * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
+ *
+ * Hauppauge: pin 5
+ * Voodoo: pin 20
+ */
+static void boot_msp34xx(struct bttv *btv, int pin)
+{
+ int mask = (1 << pin);
+
+ gpio_inout(mask,mask);
+ gpio_bits(mask,0);
+ mdelay(2);
+ udelay(500);
+ gpio_bits(mask,mask);
+
+ if (bttv_gpio)
+ bttv_gpio_tracking(btv,"msp34xx");
+ if (bttv_verbose)
+ pr_info("%d: Hauppauge/Voodoo msp34xx: reset line init [%d]\n",
+ btv->c.nr, pin);
+}
+
+/* ----------------------------------------------------------------------- */
+/* Imagenation L-Model PXC200 Framegrabber */
+/* This is basically the same procedure as
+ * used by Alessandro Rubini in his pxc200
+ * driver, but using BTTV functions */
+
+static void init_PXC200(struct bttv *btv)
+{
+ static int vals[] = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d, 0x01, 0x02,
+ 0x03, 0x04, 0x05, 0x06, 0x00 };
+ unsigned int i;
+ int tmp;
+ u32 val;
+
+ /* Initialise GPIO-connevted stuff */
+ gpio_inout(0xffffff, (1<<13));
+ gpio_write(0);
+ udelay(3);
+ gpio_write(1<<13);
+ /* GPIO inputs are pulled up, so no need to drive
+ * reset pin any longer */
+ gpio_bits(0xffffff, 0);
+ if (bttv_gpio)
+ bttv_gpio_tracking(btv,"pxc200");
+
+ /* we could/should try and reset/control the AD pots? but
+ right now we simply turned off the crushing. Without
+ this the AGC drifts drifts
+ remember the EN is reverse logic -->
+ setting BT848_ADC_AGC_EN disable the AGC
+ tboult@eecs.lehigh.edu
+ */
+
+ btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
+
+ /* Initialise MAX517 DAC */
+ pr_info("Setting DAC reference voltage level ...\n");
+ bttv_I2CWrite(btv,0x5E,0,0x80,1);
+
+ /* Initialise 12C508 PIC */
+ /* The I2CWrite and I2CRead commmands are actually to the
+ * same chips - but the R/W bit is included in the address
+ * argument so the numbers are different */
+
+
+ pr_info("Initialising 12C508 PIC chip ...\n");
+
+ /* First of all, enable the clock line. This is used in the PXC200-F */
+ val = btread(BT848_GPIO_DMA_CTL);
+ val |= BT848_GPIO_DMA_CTL_GPCLKMODE;
+ btwrite(val, BT848_GPIO_DMA_CTL);
+
+ /* Then, push to 0 the reset pin long enough to reset the *
+ * device same as above for the reset line, but not the same
+ * value sent to the GPIO-connected stuff
+ * which one is the good one? */
+ gpio_inout(0xffffff,(1<<2));
+ gpio_write(0);
+ udelay(10);
+ gpio_write(1<<2);
+
+ for (i = 0; i < ARRAY_SIZE(vals); i++) {
+ tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
+ if (tmp != -1) {
+ pr_info("I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
+ vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
+ }
+ }
+
+ pr_info("PXC200 Initialised\n");
+}
+
+
+
+/* ----------------------------------------------------------------------- */
+/*
+ * The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
+ * it. This apparently involves the following procedure for each 878 chip:
+ *
+ * 1) write 0x00C3FEFF to the GPIO_OUT_EN register
+ *
+ * 2) write to GPIO_DATA
+ * - 0x0E
+ * - sleep 1ms
+ * - 0x10 + 0x0E
+ * - sleep 10ms
+ * - 0x0E
+ * read from GPIO_DATA into buf (uint_32)
+ * - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 )
+ * error. ERROR_CPLD_Check_Failed stop.
+ *
+ * 3) write to GPIO_DATA
+ * - write 0x4400 + 0x0E
+ * - sleep 10ms
+ * - write 0x4410 + 0x0E
+ * - sleep 1ms
+ * - write 0x0E
+ * read from GPIO_DATA into buf (uint_32)
+ * - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 )
+ * error. ERROR_CPLD_Check_Failed.
+ */
+/* ----------------------------------------------------------------------- */
+static void
+init_RTV24 (struct bttv *btv)
+{
+ uint32_t dataRead = 0;
+ long watchdog_value = 0x0E;
+
+ pr_info("%d: Adlink RTV-24 initialisation in progress ...\n",
+ btv->c.nr);
+
+ btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
+
+ btwrite (0 + watchdog_value, BT848_GPIO_DATA);
+ msleep (1);
+ btwrite (0x10 + watchdog_value, BT848_GPIO_DATA);
+ msleep (10);
+ btwrite (0 + watchdog_value, BT848_GPIO_DATA);
+
+ dataRead = btread (BT848_GPIO_DATA);
+
+ if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
+ pr_info("%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
+ btv->c.nr, dataRead);
+ }
+
+ btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA);
+ msleep (10);
+ btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA);
+ msleep (1);
+ btwrite (watchdog_value, BT848_GPIO_DATA);
+ msleep (1);
+ dataRead = btread (BT848_GPIO_DATA);
+
+ if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
+ pr_info("%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
+ btv->c.nr, dataRead);
+
+ return;
+ }
+
+ pr_info("%d: Adlink RTV-24 initialisation complete\n", btv->c.nr);
+}
+
+
+
+/* ----------------------------------------------------------------------- */
+/*
+ * The PCI-8604PW contains a CPLD, probably an ispMACH 4A, that filters
+ * the PCI REQ signals comming from the four BT878 chips. After power
+ * up, the CPLD does not forward requests to the bus, which prevents
+ * the BT878 from fetching RISC instructions from memory. While the
+ * CPLD is connected to most of the GPIOs of PCI device 0xD, only
+ * five appear to play a role in unlocking the REQ signal. The following
+ * sequence has been determined by trial and error without access to the
+ * original driver.
+ *
+ * Eight GPIOs of device 0xC are provided on connector CN4 (4 in, 4 out).
+ * Devices 0xE and 0xF do not appear to have anything connected to their
+ * GPIOs.
+ *
+ * The correct GPIO_OUT_EN value might have some more bits set. It should
+ * be possible to derive it from a boundary scan of the CPLD. Its JTAG
+ * pins are routed to test points.
+ *
+ */
+/* ----------------------------------------------------------------------- */
+static void
+init_PCI8604PW(struct bttv *btv)
+{
+ int state;
+
+ if ((PCI_SLOT(btv->c.pci->devfn) & ~3) != 0xC) {
+ pr_warn("This is not a PCI-8604PW\n");
+ return;
+ }
+
+ if (PCI_SLOT(btv->c.pci->devfn) != 0xD)
+ return;
+
+ btwrite(0x080002, BT848_GPIO_OUT_EN);
+
+ state = (btread(BT848_GPIO_DATA) >> 21) & 7;
+
+ for (;;) {
+ switch (state) {
+ case 1:
+ case 5:
+ case 6:
+ case 4:
+ pr_debug("PCI-8604PW in state %i, toggling pin\n",
+ state);
+ btwrite(0x080000, BT848_GPIO_DATA);
+ msleep(1);
+ btwrite(0x000000, BT848_GPIO_DATA);
+ msleep(1);
+ break;
+ case 7:
+ pr_info("PCI-8604PW unlocked\n");
+ return;
+ case 0:
+ /* FIXME: If we are in state 7 and toggle GPIO[19] one
+ more time, the CPLD goes into state 0, where PCI bus
+ mastering is inhibited again. We have not managed to
+ get out of that state. */
+
+ pr_err("PCI-8604PW locked until reset\n");
+ return;
+ default:
+ pr_err("PCI-8604PW in unknown state %i\n", state);
+ return;
+ }
+
+ state = (state << 4) | ((btread(BT848_GPIO_DATA) >> 21) & 7);
+
+ switch (state) {
+ case 0x15:
+ case 0x56:
+ case 0x64:
+ case 0x47:
+ /* The transition from state 7 to state 0 is, as explained
+ above, valid but undesired and with this code impossible
+ as we exit as soon as we are in state 7.
+ case 0x70: */
+ break;
+ default:
+ pr_err("PCI-8604PW invalid transition %i -> %i\n",
+ state >> 4, state & 7);
+ return;
+ }
+ state &= 7;
+ }
+}
+
+/* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
+ *
+ * This is needed because rv605 don't use a normal multiplex, but a crosspoint
+ * switch instead (CD22M3494E). This IC can have multiple active connections
+ * between Xn (input) and Yn (output) pins. We need to clear any existing
+ * connection prior to establish a new one, pulsing the STROBE pin.
+ *
+ * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
+ * GPIO pins are wired as:
+ * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller)
+ * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller)
+ * GPIO[7] - DATA (xpoint) - P1[7] (microcontroller)
+ * GPIO[8] - - P3[5] (microcontroller)
+ * GPIO[9] - RESET (xpoint) - P3[6] (microcontroller)
+ * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroller)
+ * GPINTR - - P3[4] (microcontroller)
+ *
+ * The microcontroller is a 80C32 like. It should be possible to change xpoint
+ * configuration either directly (as we are doing) or using the microcontroller
+ * which is also wired to I2C interface. I have no further info on the
+ * microcontroller features, one would need to disassembly the firmware.
+ * note: the vendor refused to give any information on this product, all
+ * that stuff was found using a multimeter! :)
+ */
+static void rv605_muxsel(struct bttv *btv, unsigned int input)
+{
+ static const u8 muxgpio[] = { 0x3, 0x1, 0x2, 0x4, 0xf, 0x7, 0xe, 0x0,
+ 0xd, 0xb, 0xc, 0x6, 0x9, 0x5, 0x8, 0xa };
+
+ gpio_bits(0x07f, muxgpio[input]);
+
+ /* reset all conections */
+ gpio_bits(0x200,0x200);
+ mdelay(1);
+ gpio_bits(0x200,0x000);
+ mdelay(1);
+
+ /* create a new connection */
+ gpio_bits(0x480,0x480);
+ mdelay(1);
+ gpio_bits(0x480,0x080);
+ mdelay(1);
+}
+
+/* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
+ *
+ * The CS16 (available on eBay cheap) is a PCI board with four Fusion
+ * 878A chips, a PCI bridge, an Atmel microcontroller, four sync separator
+ * chips, ten eight input analog multiplexors, a not chip and a few
+ * other components.
+ *
+ * 16 inputs on a secondary bracket are provided and can be selected
+ * from each of the four capture chips. Two of the eight input
+ * multiplexors are used to select from any of the 16 input signals.
+ *
+ * Unsupported hardware capabilities:
+ * . A video output monitor on the secondary bracket can be selected from
+ * one of the 878A chips.
+ * . Another passthrough but I haven't spent any time investigating it.
+ * . Digital I/O (logic level connected to GPIO) is available from an
+ * onboard header.
+ *
+ * The on chip input mux should always be set to 2.
+ * GPIO[16:19] - Video input selection
+ * GPIO[0:3] - Video output monitor select (only available from one 878A)
+ * GPIO[?:?] - Digital I/O.
+ *
+ * There is an ATMEL microcontroller with an 8031 core on board. I have not
+ * determined what function (if any) it provides. With the microcontroller
+ * and sync separator chips a guess is that it might have to do with video
+ * switching and maybe some digital I/O.
+ */
+static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
+{
+ /* video mux */
+ gpio_bits(0x0f0000, input << 16);
+}
+
+static void tibetCS16_init(struct bttv *btv)
+{
+ /* enable gpio bits, mask obtained via btSpy */
+ gpio_inout(0xffffff, 0x0f7fff);
+ gpio_write(0x0f7fff);
+}
+
+/*
+ * The following routines for the Kodicom-4400r get a little mind-twisting.
+ * There is a "master" controller and three "slave" controllers, together
+ * an analog switch which connects any of 16 cameras to any of the BT87A's.
+ * The analog switch is controlled by the "master", but the detection order
+ * of the four BT878A chips is in an order which I just don't understand.
+ * The "master" is actually the second controller to be detected. The
+ * logic on the board uses logical numbers for the 4 controllers, but
+ * those numbers are different from the detection sequence. When working
+ * with the analog switch, we need to "map" from the detection sequence
+ * over to the board's logical controller number. This mapping sequence
+ * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
+ * unit 3, the second (which is the master) is logical unit 0, etc.
+ * We need to maintain the status of the analog switch (which of the 16
+ * cameras is connected to which of the 4 controllers) in sw_status array.
+ */
+
+/*
+ * First a routine to set the analog switch, which controls which camera
+ * is routed to which controller. The switch comprises an X-address
+ * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
+ * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
+ * A data value (gpio bit 7) of '1' enables the switch, and '0' disables
+ * the switch. A STROBE bit (gpio bit 8) latches the data value into the
+ * specified address. The idea is to set the address and data, then bring
+ * STROBE high, and finally bring STROBE back to low.
+ */
+static void kodicom4400r_write(struct bttv *btv,
+ unsigned char xaddr,
+ unsigned char yaddr,
+ unsigned char data) {
+ unsigned int udata;
+
+ udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf);
+ gpio_bits(0x1ff, udata); /* write ADDR and DAT */
+ gpio_bits(0x1ff, udata | (1 << 8)); /* strobe high */
+ gpio_bits(0x1ff, udata); /* strobe low */
+}
+
+/*
+ * Next the mux select. Both the "master" and "slave" 'cards' (controllers)
+ * use this routine. The routine finds the "master" for the card, maps
+ * the controller number from the detected position over to the logical
+ * number, writes the appropriate data to the analog switch, and housekeeps
+ * the local copy of the switch information. The parameter 'input' is the
+ * requested camera number (0 - 15).
+ */
+static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input)
+{
+ int xaddr, yaddr;
+ struct bttv *mctlr;
+ static unsigned char map[4] = {3, 0, 2, 1};
+
+ mctlr = master[btv->c.nr];
+ if (mctlr == NULL) { /* ignore if master not yet detected */
+ return;
+ }
+ yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */
+ yaddr = map[yaddr];
+ xaddr = input & 0xf;
+ /* Check if the controller/camera pair has changed, else ignore */
+ if (mctlr->sw_status[yaddr] != xaddr)
+ {
+ /* "open" the old switch, "close" the new one, save the new */
+ kodicom4400r_write(mctlr, mctlr->sw_status[yaddr], yaddr, 0);
+ mctlr->sw_status[yaddr] = xaddr;
+ kodicom4400r_write(mctlr, xaddr, yaddr, 1);
+ }
+}
+
+/*
+ * During initialisation, we need to reset the analog switch. We
+ * also preset the switch to map the 4 connectors on the card to the
+ * *user's* (see above description of kodicom4400r_muxsel) channels
+ * 0 through 3
+ */
+static void kodicom4400r_init(struct bttv *btv)
+{
+ int ix;
+
+ gpio_inout(0x0003ff, 0x0003ff);
+ gpio_write(1 << 9); /* reset MUX */
+ gpio_write(0);
+ /* Preset camera 0 to the 4 controllers */
+ for (ix = 0; ix < 4; ix++) {
+ btv->sw_status[ix] = ix;
+ kodicom4400r_write(btv, ix, ix, 1);
+ }
+ /*
+ * Since this is the "master", we need to set up the
+ * other three controller chips' pointers to this structure
+ * for later use in the muxsel routine.
+ */
+ if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3))
+ return;
+ master[btv->c.nr-1] = btv;
+ master[btv->c.nr] = btv;
+ master[btv->c.nr+1] = btv;
+ master[btv->c.nr+2] = btv;
+}
+
+/* The Grandtec X-Guard framegrabber card uses two Dual 4-channel
+ * video multiplexers to provide up to 16 video inputs. These
+ * multiplexers are controlled by the lower 8 GPIO pins of the
+ * bt878. The multiplexers probably Pericom PI5V331Q or similar.
+
+ * xxx0 is pin xxx of multiplexer U5,
+ * yyy1 is pin yyy of multiplexer U2
+ */
+#define ENA0 0x01
+#define ENB0 0x02
+#define ENA1 0x04
+#define ENB1 0x08
+
+#define IN10 0x10
+#define IN00 0x20
+#define IN11 0x40
+#define IN01 0x80
+
+static void xguard_muxsel(struct bttv *btv, unsigned int input)
+{
+ static const int masks[] = {
+ ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10,
+ ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10,
+ ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11,
+ ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11,
+ };
+ gpio_write(masks[input%16]);
+}
+static void picolo_tetra_init(struct bttv *btv)
+{
+ /*This is the video input redirection fonctionality : I DID NOT USED IT. */
+ btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */
+ btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A] set to 1*/
+}
+static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
+{
+
+ dprintk("%d : picolo_tetra_muxsel => input = %d\n", btv->c.nr, input);
+ /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
+ /*GPIO[20]&GPIO[21] used to choose the right input*/
+ btwrite (input<<20,BT848_GPIO_DATA);
+
+}
+
+/*
+ * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
+ *
+ * The IVC120G security card has 4 i2c controlled TDA8540 matrix
+ * swichers to provide 16 channels to MUX0. The TDA8540's have
+ * 4 independent outputs and as such the IVC120G also has the
+ * optional "Monitor Out" bus. This allows the card to be looking
+ * at one input while the monitor is looking at another.
+ *
+ * Since I've couldn't be bothered figuring out how to add an
+ * independent muxsel for the monitor bus, I've just set it to
+ * whatever the card is looking at.
+ *
+ * OUT0 of the TDA8540's is connected to MUX0 (0x03)
+ * OUT1 of the TDA8540's is connected to "Monitor Out" (0x0C)
+ *
+ * TDA8540_ALT3 IN0-3 = Channel 13 - 16 (0x03)
+ * TDA8540_ALT4 IN0-3 = Channel 1 - 4 (0x03)
+ * TDA8540_ALT5 IN0-3 = Channel 5 - 8 (0x03)
+ * TDA8540_ALT6 IN0-3 = Channel 9 - 12 (0x03)
+ *
+ */
+
+/* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
+#define I2C_TDA8540 0x90
+#define I2C_TDA8540_ALT1 0x92
+#define I2C_TDA8540_ALT2 0x94
+#define I2C_TDA8540_ALT3 0x96
+#define I2C_TDA8540_ALT4 0x98
+#define I2C_TDA8540_ALT5 0x9a
+#define I2C_TDA8540_ALT6 0x9c
+
+static void ivc120_muxsel(struct bttv *btv, unsigned int input)
+{
+ /* Simple maths */
+ int key = input % 4;
+ int matrix = input / 4;
+
+ dprintk("%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
+ btv->c.nr, input, matrix, key);
+
+ /* Handles the input selection on the TDA8540's */
+ bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
+ ((matrix == 3) ? (key | key << 2) : 0x00), 1);
+ bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
+ ((matrix == 0) ? (key | key << 2) : 0x00), 1);
+ bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
+ ((matrix == 1) ? (key | key << 2) : 0x00), 1);
+ bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
+ ((matrix == 2) ? (key | key << 2) : 0x00), 1);
+
+ /* Handles the output enables on the TDA8540's */
+ bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
+ ((matrix == 3) ? 0x03 : 0x00), 1); /* 13 - 16 */
+ bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
+ ((matrix == 0) ? 0x03 : 0x00), 1); /* 1-4 */
+ bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
+ ((matrix == 1) ? 0x03 : 0x00), 1); /* 5-8 */
+ bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
+ ((matrix == 2) ? 0x03 : 0x00), 1); /* 9-12 */
+
+ /* 878's MUX0 is already selected for input via muxsel values */
+}
+
+
+/* PXC200 muxsel helper
+ * luke@syseng.anu.edu.au
+ * another transplant
+ * from Alessandro Rubini (rubini@linux.it)
+ *
+ * There are 4 kinds of cards:
+ * PXC200L which is bt848
+ * PXC200F which is bt848 with PIC controlling mux
+ * PXC200AL which is bt878
+ * PXC200AF which is bt878 with PIC controlling mux
+ */
+#define PX_CFG_PXC200F 0x01
+#define PX_FLAG_PXC200A 0x00001000 /* a pxc200A is bt-878 based */
+#define PX_I2C_PIC 0x0f
+#define PX_PXC200A_CARDID 0x200a1295
+#define PX_I2C_CMD_CFG 0x00
+
+static void PXC200_muxsel(struct bttv *btv, unsigned int input)
+{
+ int rc;
+ long mux;
+ int bitmask;
+ unsigned char buf[2];
+
+ /* Read PIC config to determine if this is a PXC200F */
+ /* PX_I2C_CMD_CFG*/
+ buf[0]=0;
+ buf[1]=0;
+ rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
+ if (rc) {
+ pr_debug("%d: PXC200_muxsel: pic cfg write failed:%d\n",
+ btv->c.nr, rc);
+ /* not PXC ? do nothing */
+ return;
+ }
+
+ rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
+ if (!(rc & PX_CFG_PXC200F)) {
+ pr_debug("%d: PXC200_muxsel: not PXC200F rc:%d\n",
+ btv->c.nr, rc);
+ return;
+ }
+
+
+ /* The multiplexer in the 200F is handled by the GPIO port */
+ /* get correct mapping between inputs */
+ /* mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
+ /* ** not needed!? */
+ mux = input;
+
+ /* make sure output pins are enabled */
+ /* bitmask=0x30f; */
+ bitmask=0x302;
+ /* check whether we have a PXC200A */
+ if (btv->cardid == PX_PXC200A_CARDID) {
+ bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */
+ bitmask |= 7<<4; /* the DAC */
+ }
+ btwrite(bitmask, BT848_GPIO_OUT_EN);
+
+ bitmask = btread(BT848_GPIO_DATA);
+ if (btv->cardid == PX_PXC200A_CARDID)
+ bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7);
+ else /* older device */
+ bitmask = (bitmask & ~0x300) | ((mux & 3) << 8);
+ btwrite(bitmask,BT848_GPIO_DATA);
+
+ /*
+ * Was "to be safe, set the bt848 to input 0"
+ * Actually, since it's ok at load time, better not messing
+ * with these bits (on PXC200AF you need to set mux 2 here)
+ *
+ * needed because bttv-driver sets mux before calling this function
+ */
+ if (btv->cardid == PX_PXC200A_CARDID)
+ btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM);
+ else /* older device */
+ btand(~BT848_IFORM_MUXSEL,BT848_IFORM);
+
+ pr_debug("%d: setting input channel to:%d\n", btv->c.nr, (int)mux);
+}
+
+static void phytec_muxsel(struct bttv *btv, unsigned int input)
+{
+ unsigned int mux = input % 4;
+
+ if (input == btv->svhs)
+ mux = 0;
+
+ gpio_bits(0x3, mux);
+}
+
+/*
+ * GeoVision GV-800(S) functions
+ * Bruno Christo <bchristo@inf.ufsm.br>
+*/
+
+/* This is a function to control the analog switch, which determines which
+ * camera is routed to which controller. The switch comprises an X-address
+ * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
+ * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
+ * A data value (gpio bit 18) of '1' enables the switch, and '0' disables
+ * the switch. A STROBE bit (gpio bit 17) latches the data value into the
+ * specified address. There is also a chip select (gpio bit 16).
+ * The idea is to set the address and chip select together, bring
+ * STROBE high, write the data, and finally bring STROBE back to low.
+ */
+static void gv800s_write(struct bttv *btv,
+ unsigned char xaddr,
+ unsigned char yaddr,
+ unsigned char data) {
+ /* On the "master" 878A:
+ * GPIO bits 0-9 are used for the analog switch:
+ * 00 - 03: camera selector
+ * 04 - 06: 878A (controller) selector
+ * 16: cselect
+ * 17: strobe
+ * 18: data (1->on, 0->off)
+ * 19: reset
+ */
+ const u32 ADDRESS = ((xaddr&0xf) | (yaddr&3)<<4);
+ const u32 CSELECT = 1<<16;
+ const u32 STROBE = 1<<17;
+ const u32 DATA = data<<18;
+
+ gpio_bits(0x1007f, ADDRESS | CSELECT); /* write ADDRESS and CSELECT */
+ gpio_bits(0x20000, STROBE); /* STROBE high */
+ gpio_bits(0x40000, DATA); /* write DATA */
+ gpio_bits(0x20000, ~STROBE); /* STROBE low */
+}
+
+/*
+ * GeoVision GV-800(S) muxsel
+ *
+ * Each of the 4 cards (controllers) use this function.
+ * The controller using this function selects the input through the GPIO pins
+ * of the "master" card. A pointer to this card is stored in master[btv->c.nr].
+ *
+ * The parameter 'input' is the requested camera number (0-4) on the controller.
+ * The map array has the address of each input. Note that the addresses in the
+ * array are in the sequence the original GeoVision driver uses, that is, set
+ * every controller to input 0, then to input 1, 2, 3, repeat. This means that
+ * the physical "camera 1" connector corresponds to controller 0 input 0,
+ * "camera 2" corresponds to controller 1 input 0, and so on.
+ *
+ * After getting the input address, the function then writes the appropriate
+ * data to the analog switch, and housekeeps the local copy of the switch
+ * information.
+ */
+static void gv800s_muxsel(struct bttv *btv, unsigned int input)
+{
+ struct bttv *mctlr;
+ int xaddr, yaddr;
+ static unsigned int map[4][4] = { { 0x0, 0x4, 0xa, 0x6 },
+ { 0x1, 0x5, 0xb, 0x7 },
+ { 0x2, 0x8, 0xc, 0xe },
+ { 0x3, 0x9, 0xd, 0xf } };
+ input = input%4;
+ mctlr = master[btv->c.nr];
+ if (mctlr == NULL) {
+ /* do nothing until the "master" is detected */
+ return;
+ }
+ yaddr = (btv->c.nr - mctlr->c.nr) & 3;
+ xaddr = map[yaddr][input] & 0xf;
+
+ /* Check if the controller/camera pair has changed, ignore otherwise */
+ if (mctlr->sw_status[yaddr] != xaddr) {
+ /* disable the old switch, enable the new one and save status */
+ gv800s_write(mctlr, mctlr->sw_status[yaddr], yaddr, 0);
+ mctlr->sw_status[yaddr] = xaddr;
+ gv800s_write(mctlr, xaddr, yaddr, 1);
+ }
+}
+
+/* GeoVision GV-800(S) "master" chip init */
+static void gv800s_init(struct bttv *btv)
+{
+ int ix;
+
+ gpio_inout(0xf107f, 0xf107f);
+ gpio_write(1<<19); /* reset the analog MUX */
+ gpio_write(0);
+
+ /* Preset camera 0 to the 4 controllers */
+ for (ix = 0; ix < 4; ix++) {
+ btv->sw_status[ix] = ix;
+ gv800s_write(btv, ix, ix, 1);
+ }
+
+ /* Inputs on the "master" controller need this brightness fix */
+ bttv_I2CWrite(btv, 0x18, 0x5, 0x90, 1);
+
+ if (btv->c.nr > BTTV_MAX-4)
+ return;
+ /*
+ * Store the "master" controller pointer in the master
+ * array for later use in the muxsel function.
+ */
+ master[btv->c.nr] = btv;
+ master[btv->c.nr+1] = btv;
+ master[btv->c.nr+2] = btv;
+ master[btv->c.nr+3] = btv;
+}
+
+/* ----------------------------------------------------------------------- */
+/* motherboard chipset specific stuff */
+
+void __init bttv_check_chipset(void)
+{
+ int pcipci_fail = 0;
+ struct pci_dev *dev = NULL;
+
+ if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL)) /* should check if target is AGP */
+ pcipci_fail = 1;
+ if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
+ triton1 = 1;
+ if (pci_pci_problems & PCIPCI_VSFX)
+ vsfx = 1;
+#ifdef PCIPCI_ALIMAGIK
+ if (pci_pci_problems & PCIPCI_ALIMAGIK)
+ latency = 0x0A;
+#endif
+
+
+ /* print warnings about any quirks found */
+ if (triton1)
+ pr_info("Host bridge needs ETBF enabled\n");
+ if (vsfx)
+ pr_info("Host bridge needs VSFX enabled\n");
+ if (pcipci_fail) {
+ pr_info("bttv and your chipset may not work together\n");
+ if (!no_overlay) {
+ pr_info("overlay will be disabled\n");
+ no_overlay = 1;
+ } else {
+ pr_info("overlay forced. Use this option at your own risk.\n");
+ }
+ }
+ if (UNSET != latency)
+ pr_info("pci latency fixup [%d]\n", latency);
+ while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_82441, dev))) {
+ unsigned char b;
+ pci_read_config_byte(dev, 0x53, &b);
+ if (bttv_debug)
+ pr_info("Host bridge: 82441FX Natoma, bufcon=0x%02x\n",
+ b);
+ }
+}
+
+int bttv_handle_chipset(struct bttv *btv)
+{
+ unsigned char command;
+
+ if (!triton1 && !vsfx && UNSET == latency)
+ return 0;
+
+ if (bttv_verbose) {
+ if (triton1)
+ pr_info("%d: enabling ETBF (430FX/VP3 compatibility)\n",
+ btv->c.nr);
+ if (vsfx && btv->id >= 878)
+ pr_info("%d: enabling VSFX\n", btv->c.nr);
+ if (UNSET != latency)
+ pr_info("%d: setting pci timer to %d\n",
+ btv->c.nr, latency);
+ }
+
+ if (btv->id < 878) {
+ /* bt848 (mis)uses a bit in the irq mask for etbf */
+ if (triton1)
+ btv->triton1 = BT848_INT_ETBF;
+ } else {
+ /* bt878 has a bit in the pci config space for it */
+ pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command);
+ if (triton1)
+ command |= BT878_EN_TBFX;
+ if (vsfx)
+ command |= BT878_EN_VSFX;
+ pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command);
+ }
+ if (UNSET != latency)
+ pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency);
+ return 0;
+}
Code Review / kvmfornfv.git / blobdiff