--- /dev/null
+ /*
+ Driver for Philips tda1004xh OFDM Demodulator
+
+ (c) 2003, 2004 Andrew de Quincey & Robert Schlabbach
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+ */
+/*
+ * This driver needs external firmware. Please use the commands
+ * "<kerneldir>/Documentation/dvb/get_dvb_firmware tda10045",
+ * "<kerneldir>/Documentation/dvb/get_dvb_firmware tda10046" to
+ * download/extract them, and then copy them to /usr/lib/hotplug/firmware
+ * or /lib/firmware (depending on configuration of firmware hotplug).
+ */
+#define TDA10045_DEFAULT_FIRMWARE "dvb-fe-tda10045.fw"
+#define TDA10046_DEFAULT_FIRMWARE "dvb-fe-tda10046.fw"
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/jiffies.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+
+#include "dvb_frontend.h"
+#include "tda1004x.h"
+
+static int debug;
+#define dprintk(args...) \
+ do { \
+ if (debug) printk(KERN_DEBUG "tda1004x: " args); \
+ } while (0)
+
+#define TDA1004X_CHIPID 0x00
+#define TDA1004X_AUTO 0x01
+#define TDA1004X_IN_CONF1 0x02
+#define TDA1004X_IN_CONF2 0x03
+#define TDA1004X_OUT_CONF1 0x04
+#define TDA1004X_OUT_CONF2 0x05
+#define TDA1004X_STATUS_CD 0x06
+#define TDA1004X_CONFC4 0x07
+#define TDA1004X_DSSPARE2 0x0C
+#define TDA10045H_CODE_IN 0x0D
+#define TDA10045H_FWPAGE 0x0E
+#define TDA1004X_SCAN_CPT 0x10
+#define TDA1004X_DSP_CMD 0x11
+#define TDA1004X_DSP_ARG 0x12
+#define TDA1004X_DSP_DATA1 0x13
+#define TDA1004X_DSP_DATA2 0x14
+#define TDA1004X_CONFADC1 0x15
+#define TDA1004X_CONFC1 0x16
+#define TDA10045H_S_AGC 0x1a
+#define TDA10046H_AGC_TUN_LEVEL 0x1a
+#define TDA1004X_SNR 0x1c
+#define TDA1004X_CONF_TS1 0x1e
+#define TDA1004X_CONF_TS2 0x1f
+#define TDA1004X_CBER_RESET 0x20
+#define TDA1004X_CBER_MSB 0x21
+#define TDA1004X_CBER_LSB 0x22
+#define TDA1004X_CVBER_LUT 0x23
+#define TDA1004X_VBER_MSB 0x24
+#define TDA1004X_VBER_MID 0x25
+#define TDA1004X_VBER_LSB 0x26
+#define TDA1004X_UNCOR 0x27
+
+#define TDA10045H_CONFPLL_P 0x2D
+#define TDA10045H_CONFPLL_M_MSB 0x2E
+#define TDA10045H_CONFPLL_M_LSB 0x2F
+#define TDA10045H_CONFPLL_N 0x30
+
+#define TDA10046H_CONFPLL1 0x2D
+#define TDA10046H_CONFPLL2 0x2F
+#define TDA10046H_CONFPLL3 0x30
+#define TDA10046H_TIME_WREF1 0x31
+#define TDA10046H_TIME_WREF2 0x32
+#define TDA10046H_TIME_WREF3 0x33
+#define TDA10046H_TIME_WREF4 0x34
+#define TDA10046H_TIME_WREF5 0x35
+
+#define TDA10045H_UNSURW_MSB 0x31
+#define TDA10045H_UNSURW_LSB 0x32
+#define TDA10045H_WREF_MSB 0x33
+#define TDA10045H_WREF_MID 0x34
+#define TDA10045H_WREF_LSB 0x35
+#define TDA10045H_MUXOUT 0x36
+#define TDA1004X_CONFADC2 0x37
+
+#define TDA10045H_IOFFSET 0x38
+
+#define TDA10046H_CONF_TRISTATE1 0x3B
+#define TDA10046H_CONF_TRISTATE2 0x3C
+#define TDA10046H_CONF_POLARITY 0x3D
+#define TDA10046H_FREQ_OFFSET 0x3E
+#define TDA10046H_GPIO_OUT_SEL 0x41
+#define TDA10046H_GPIO_SELECT 0x42
+#define TDA10046H_AGC_CONF 0x43
+#define TDA10046H_AGC_THR 0x44
+#define TDA10046H_AGC_RENORM 0x45
+#define TDA10046H_AGC_GAINS 0x46
+#define TDA10046H_AGC_TUN_MIN 0x47
+#define TDA10046H_AGC_TUN_MAX 0x48
+#define TDA10046H_AGC_IF_MIN 0x49
+#define TDA10046H_AGC_IF_MAX 0x4A
+
+#define TDA10046H_FREQ_PHY2_MSB 0x4D
+#define TDA10046H_FREQ_PHY2_LSB 0x4E
+
+#define TDA10046H_CVBER_CTRL 0x4F
+#define TDA10046H_AGC_IF_LEVEL 0x52
+#define TDA10046H_CODE_CPT 0x57
+#define TDA10046H_CODE_IN 0x58
+
+
+static int tda1004x_write_byteI(struct tda1004x_state *state, int reg, int data)
+{
+ int ret;
+ u8 buf[] = { reg, data };
+ struct i2c_msg msg = { .flags = 0, .buf = buf, .len = 2 };
+
+ dprintk("%s: reg=0x%x, data=0x%x\n", __func__, reg, data);
+
+ msg.addr = state->config->demod_address;
+ ret = i2c_transfer(state->i2c, &msg, 1);
+
+ if (ret != 1)
+ dprintk("%s: error reg=0x%x, data=0x%x, ret=%i\n",
+ __func__, reg, data, ret);
+
+ dprintk("%s: success reg=0x%x, data=0x%x, ret=%i\n", __func__,
+ reg, data, ret);
+ return (ret != 1) ? -1 : 0;
+}
+
+static int tda1004x_read_byte(struct tda1004x_state *state, int reg)
+{
+ int ret;
+ u8 b0[] = { reg };
+ u8 b1[] = { 0 };
+ struct i2c_msg msg[] = {{ .flags = 0, .buf = b0, .len = 1 },
+ { .flags = I2C_M_RD, .buf = b1, .len = 1 }};
+
+ dprintk("%s: reg=0x%x\n", __func__, reg);
+
+ msg[0].addr = state->config->demod_address;
+ msg[1].addr = state->config->demod_address;
+ ret = i2c_transfer(state->i2c, msg, 2);
+
+ if (ret != 2) {
+ dprintk("%s: error reg=0x%x, ret=%i\n", __func__, reg,
+ ret);
+ return -EINVAL;
+ }
+
+ dprintk("%s: success reg=0x%x, data=0x%x, ret=%i\n", __func__,
+ reg, b1[0], ret);
+ return b1[0];
+}
+
+static int tda1004x_write_mask(struct tda1004x_state *state, int reg, int mask, int data)
+{
+ int val;
+ dprintk("%s: reg=0x%x, mask=0x%x, data=0x%x\n", __func__, reg,
+ mask, data);
+
+ // read a byte and check
+ val = tda1004x_read_byte(state, reg);
+ if (val < 0)
+ return val;
+
+ // mask if off
+ val = val & ~mask;
+ val |= data & 0xff;
+
+ // write it out again
+ return tda1004x_write_byteI(state, reg, val);
+}
+
+static int tda1004x_write_buf(struct tda1004x_state *state, int reg, unsigned char *buf, int len)
+{
+ int i;
+ int result;
+
+ dprintk("%s: reg=0x%x, len=0x%x\n", __func__, reg, len);
+
+ result = 0;
+ for (i = 0; i < len; i++) {
+ result = tda1004x_write_byteI(state, reg + i, buf[i]);
+ if (result != 0)
+ break;
+ }
+
+ return result;
+}
+
+static int tda1004x_enable_tuner_i2c(struct tda1004x_state *state)
+{
+ int result;
+ dprintk("%s\n", __func__);
+
+ result = tda1004x_write_mask(state, TDA1004X_CONFC4, 2, 2);
+ msleep(20);
+ return result;
+}
+
+static int tda1004x_disable_tuner_i2c(struct tda1004x_state *state)
+{
+ dprintk("%s\n", __func__);
+
+ return tda1004x_write_mask(state, TDA1004X_CONFC4, 2, 0);
+}
+
+static int tda10045h_set_bandwidth(struct tda1004x_state *state,
+ u32 bandwidth)
+{
+ static u8 bandwidth_6mhz[] = { 0x02, 0x00, 0x3d, 0x00, 0x60, 0x1e, 0xa7, 0x45, 0x4f };
+ static u8 bandwidth_7mhz[] = { 0x02, 0x00, 0x37, 0x00, 0x4a, 0x2f, 0x6d, 0x76, 0xdb };
+ static u8 bandwidth_8mhz[] = { 0x02, 0x00, 0x3d, 0x00, 0x48, 0x17, 0x89, 0xc7, 0x14 };
+
+ switch (bandwidth) {
+ case 6000000:
+ tda1004x_write_buf(state, TDA10045H_CONFPLL_P, bandwidth_6mhz, sizeof(bandwidth_6mhz));
+ break;
+
+ case 7000000:
+ tda1004x_write_buf(state, TDA10045H_CONFPLL_P, bandwidth_7mhz, sizeof(bandwidth_7mhz));
+ break;
+
+ case 8000000:
+ tda1004x_write_buf(state, TDA10045H_CONFPLL_P, bandwidth_8mhz, sizeof(bandwidth_8mhz));
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ tda1004x_write_byteI(state, TDA10045H_IOFFSET, 0);
+
+ return 0;
+}
+
+static int tda10046h_set_bandwidth(struct tda1004x_state *state,
+ u32 bandwidth)
+{
+ static u8 bandwidth_6mhz_53M[] = { 0x7b, 0x2e, 0x11, 0xf0, 0xd2 };
+ static u8 bandwidth_7mhz_53M[] = { 0x6a, 0x02, 0x6a, 0x43, 0x9f };
+ static u8 bandwidth_8mhz_53M[] = { 0x5c, 0x32, 0xc2, 0x96, 0x6d };
+
+ static u8 bandwidth_6mhz_48M[] = { 0x70, 0x02, 0x49, 0x24, 0x92 };
+ static u8 bandwidth_7mhz_48M[] = { 0x60, 0x02, 0xaa, 0xaa, 0xab };
+ static u8 bandwidth_8mhz_48M[] = { 0x54, 0x03, 0x0c, 0x30, 0xc3 };
+ int tda10046_clk53m;
+
+ if ((state->config->if_freq == TDA10046_FREQ_045) ||
+ (state->config->if_freq == TDA10046_FREQ_052))
+ tda10046_clk53m = 0;
+ else
+ tda10046_clk53m = 1;
+ switch (bandwidth) {
+ case 6000000:
+ if (tda10046_clk53m)
+ tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_6mhz_53M,
+ sizeof(bandwidth_6mhz_53M));
+ else
+ tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_6mhz_48M,
+ sizeof(bandwidth_6mhz_48M));
+ if (state->config->if_freq == TDA10046_FREQ_045) {
+ tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0a);
+ tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0xab);
+ }
+ break;
+
+ case 7000000:
+ if (tda10046_clk53m)
+ tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_7mhz_53M,
+ sizeof(bandwidth_7mhz_53M));
+ else
+ tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_7mhz_48M,
+ sizeof(bandwidth_7mhz_48M));
+ if (state->config->if_freq == TDA10046_FREQ_045) {
+ tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0c);
+ tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x00);
+ }
+ break;
+
+ case 8000000:
+ if (tda10046_clk53m)
+ tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_8mhz_53M,
+ sizeof(bandwidth_8mhz_53M));
+ else
+ tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_8mhz_48M,
+ sizeof(bandwidth_8mhz_48M));
+ if (state->config->if_freq == TDA10046_FREQ_045) {
+ tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0d);
+ tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x55);
+ }
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int tda1004x_do_upload(struct tda1004x_state *state,
+ const unsigned char *mem, unsigned int len,
+ u8 dspCodeCounterReg, u8 dspCodeInReg)
+{
+ u8 buf[65];
+ struct i2c_msg fw_msg = { .flags = 0, .buf = buf, .len = 0 };
+ int tx_size;
+ int pos = 0;
+
+ /* clear code counter */
+ tda1004x_write_byteI(state, dspCodeCounterReg, 0);
+ fw_msg.addr = state->config->demod_address;
+
+ i2c_lock_adapter(state->i2c);
+ buf[0] = dspCodeInReg;
+ while (pos != len) {
+ // work out how much to send this time
+ tx_size = len - pos;
+ if (tx_size > 0x10)
+ tx_size = 0x10;
+
+ // send the chunk
+ memcpy(buf + 1, mem + pos, tx_size);
+ fw_msg.len = tx_size + 1;
+ if (__i2c_transfer(state->i2c, &fw_msg, 1) != 1) {
+ printk(KERN_ERR "tda1004x: Error during firmware upload\n");
+ i2c_unlock_adapter(state->i2c);
+ return -EIO;
+ }
+ pos += tx_size;
+
+ dprintk("%s: fw_pos=0x%x\n", __func__, pos);
+ }
+ i2c_unlock_adapter(state->i2c);
+
+ /* give the DSP a chance to settle 03/10/05 Hac */
+ msleep(100);
+
+ return 0;
+}
+
+static int tda1004x_check_upload_ok(struct tda1004x_state *state)
+{
+ u8 data1, data2;
+ unsigned long timeout;
+
+ if (state->demod_type == TDA1004X_DEMOD_TDA10046) {
+ timeout = jiffies + 2 * HZ;
+ while(!(tda1004x_read_byte(state, TDA1004X_STATUS_CD) & 0x20)) {
+ if (time_after(jiffies, timeout)) {
+ printk(KERN_ERR "tda1004x: timeout waiting for DSP ready\n");
+ break;
+ }
+ msleep(1);
+ }
+ } else
+ msleep(100);
+
+ // check upload was OK
+ tda1004x_write_mask(state, TDA1004X_CONFC4, 0x10, 0); // we want to read from the DSP
+ tda1004x_write_byteI(state, TDA1004X_DSP_CMD, 0x67);
+
+ data1 = tda1004x_read_byte(state, TDA1004X_DSP_DATA1);
+ data2 = tda1004x_read_byte(state, TDA1004X_DSP_DATA2);
+ if (data1 != 0x67 || data2 < 0x20 || data2 > 0x2e) {
+ printk(KERN_INFO "tda1004x: found firmware revision %x -- invalid\n", data2);
+ return -EIO;
+ }
+ printk(KERN_INFO "tda1004x: found firmware revision %x -- ok\n", data2);
+ return 0;
+}
+
+static int tda10045_fwupload(struct dvb_frontend* fe)
+{
+ struct tda1004x_state* state = fe->demodulator_priv;
+ int ret;
+ const struct firmware *fw;
+
+ /* don't re-upload unless necessary */
+ if (tda1004x_check_upload_ok(state) == 0)
+ return 0;
+
+ /* request the firmware, this will block until someone uploads it */
+ printk(KERN_INFO "tda1004x: waiting for firmware upload (%s)...\n", TDA10045_DEFAULT_FIRMWARE);
+ ret = state->config->request_firmware(fe, &fw, TDA10045_DEFAULT_FIRMWARE);
+ if (ret) {
+ printk(KERN_ERR "tda1004x: no firmware upload (timeout or file not found?)\n");
+ return ret;
+ }
+
+ /* reset chip */
+ tda1004x_write_mask(state, TDA1004X_CONFC4, 0x10, 0);
+ tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 8);
+ tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 0);
+ msleep(10);
+
+ /* set parameters */
+ tda10045h_set_bandwidth(state, 8000000);
+
+ ret = tda1004x_do_upload(state, fw->data, fw->size, TDA10045H_FWPAGE, TDA10045H_CODE_IN);
+ release_firmware(fw);
+ if (ret)
+ return ret;
+ printk(KERN_INFO "tda1004x: firmware upload complete\n");
+
+ /* wait for DSP to initialise */
+ /* DSPREADY doesn't seem to work on the TDA10045H */
+ msleep(100);
+
+ return tda1004x_check_upload_ok(state);
+}
+
+static void tda10046_init_plls(struct dvb_frontend* fe)
+{
+ struct tda1004x_state* state = fe->demodulator_priv;
+ int tda10046_clk53m;
+
+ if ((state->config->if_freq == TDA10046_FREQ_045) ||
+ (state->config->if_freq == TDA10046_FREQ_052))
+ tda10046_clk53m = 0;
+ else
+ tda10046_clk53m = 1;
+
+ tda1004x_write_byteI(state, TDA10046H_CONFPLL1, 0xf0);
+ if(tda10046_clk53m) {
+ printk(KERN_INFO "tda1004x: setting up plls for 53MHz sampling clock\n");
+ tda1004x_write_byteI(state, TDA10046H_CONFPLL2, 0x08); // PLL M = 8
+ } else {
+ printk(KERN_INFO "tda1004x: setting up plls for 48MHz sampling clock\n");
+ tda1004x_write_byteI(state, TDA10046H_CONFPLL2, 0x03); // PLL M = 3
+ }
+ if (state->config->xtal_freq == TDA10046_XTAL_4M ) {
+ dprintk("%s: setting up PLLs for a 4 MHz Xtal\n", __func__);
+ tda1004x_write_byteI(state, TDA10046H_CONFPLL3, 0); // PLL P = N = 0
+ } else {
+ dprintk("%s: setting up PLLs for a 16 MHz Xtal\n", __func__);
+ tda1004x_write_byteI(state, TDA10046H_CONFPLL3, 3); // PLL P = 0, N = 3
+ }
+ if(tda10046_clk53m)
+ tda1004x_write_byteI(state, TDA10046H_FREQ_OFFSET, 0x67);
+ else
+ tda1004x_write_byteI(state, TDA10046H_FREQ_OFFSET, 0x72);
+ /* Note clock frequency is handled implicitly */
+ switch (state->config->if_freq) {
+ case TDA10046_FREQ_045:
+ tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0c);
+ tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x00);
+ break;
+ case TDA10046_FREQ_052:
+ tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0d);
+ tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0xc7);
+ break;
+ case TDA10046_FREQ_3617:
+ tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0xd7);
+ tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x59);
+ break;
+ case TDA10046_FREQ_3613:
+ tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0xd7);
+ tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x3f);
+ break;
+ }
+ tda10046h_set_bandwidth(state, 8000000); /* default bandwidth 8 MHz */
+ /* let the PLLs settle */
+ msleep(120);
+}
+
+static int tda10046_fwupload(struct dvb_frontend* fe)
+{
+ struct tda1004x_state* state = fe->demodulator_priv;
+ int ret, confc4;
+ const struct firmware *fw;
+
+ /* reset + wake up chip */
+ if (state->config->xtal_freq == TDA10046_XTAL_4M) {
+ confc4 = 0;
+ } else {
+ dprintk("%s: 16MHz Xtal, reducing I2C speed\n", __func__);
+ confc4 = 0x80;
+ }
+ tda1004x_write_byteI(state, TDA1004X_CONFC4, confc4);
+
+ tda1004x_write_mask(state, TDA10046H_CONF_TRISTATE1, 1, 0);
+ /* set GPIO 1 and 3 */
+ if (state->config->gpio_config != TDA10046_GPTRI) {
+ tda1004x_write_byteI(state, TDA10046H_CONF_TRISTATE2, 0x33);
+ tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0x0f, state->config->gpio_config &0x0f);
+ }
+ /* let the clocks recover from sleep */
+ msleep(10);
+
+ /* The PLLs need to be reprogrammed after sleep */
+ tda10046_init_plls(fe);
+ tda1004x_write_mask(state, TDA1004X_CONFADC2, 0xc0, 0);
+
+ /* don't re-upload unless necessary */
+ if (tda1004x_check_upload_ok(state) == 0)
+ return 0;
+
+ /*
+ For i2c normal work, we need to slow down the bus speed.
+ However, the slow down breaks the eeprom firmware load.
+ So, use normal speed for eeprom booting and then restore the
+ i2c speed after that. Tested with MSI TV @nyware A/D board,
+ that comes with firmware version 29 inside their eeprom.
+
+ It should also be noticed that no other I2C transfer should
+ be in course while booting from eeprom, otherwise, tda10046
+ goes into an instable state. So, proper locking are needed
+ at the i2c bus master.
+ */
+ printk(KERN_INFO "tda1004x: trying to boot from eeprom\n");
+ tda1004x_write_byteI(state, TDA1004X_CONFC4, 4);
+ msleep(300);
+ tda1004x_write_byteI(state, TDA1004X_CONFC4, confc4);
+
+ /* Checks if eeprom firmware went without troubles */
+ if (tda1004x_check_upload_ok(state) == 0)
+ return 0;
+
+ /* eeprom firmware didn't work. Load one manually. */
+
+ if (state->config->request_firmware != NULL) {
+ /* request the firmware, this will block until someone uploads it */
+ printk(KERN_INFO "tda1004x: waiting for firmware upload...\n");
+ ret = state->config->request_firmware(fe, &fw, TDA10046_DEFAULT_FIRMWARE);
+ if (ret) {
+ /* remain compatible to old bug: try to load with tda10045 image name */
+ ret = state->config->request_firmware(fe, &fw, TDA10045_DEFAULT_FIRMWARE);
+ if (ret) {
+ printk(KERN_ERR "tda1004x: no firmware upload (timeout or file not found?)\n");
+ return ret;
+ } else {
+ printk(KERN_INFO "tda1004x: please rename the firmware file to %s\n",
+ TDA10046_DEFAULT_FIRMWARE);
+ }
+ }
+ } else {
+ printk(KERN_ERR "tda1004x: no request function defined, can't upload from file\n");
+ return -EIO;
+ }
+ tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 8); // going to boot from HOST
+ ret = tda1004x_do_upload(state, fw->data, fw->size, TDA10046H_CODE_CPT, TDA10046H_CODE_IN);
+ release_firmware(fw);
+ return tda1004x_check_upload_ok(state);
+}
+
+static int tda1004x_encode_fec(int fec)
+{
+ // convert known FEC values
+ switch (fec) {
+ case FEC_1_2:
+ return 0;
+ case FEC_2_3:
+ return 1;
+ case FEC_3_4:
+ return 2;
+ case FEC_5_6:
+ return 3;
+ case FEC_7_8:
+ return 4;
+ }
+
+ // unsupported
+ return -EINVAL;
+}
+
+static int tda1004x_decode_fec(int tdafec)
+{
+ // convert known FEC values
+ switch (tdafec) {
+ case 0:
+ return FEC_1_2;
+ case 1:
+ return FEC_2_3;
+ case 2:
+ return FEC_3_4;
+ case 3:
+ return FEC_5_6;
+ case 4:
+ return FEC_7_8;
+ }
+
+ // unsupported
+ return -1;
+}
+
+static int tda1004x_write(struct dvb_frontend* fe, const u8 buf[], int len)
+{
+ struct tda1004x_state* state = fe->demodulator_priv;
+
+ if (len != 2)
+ return -EINVAL;
+
+ return tda1004x_write_byteI(state, buf[0], buf[1]);
+}
+
+static int tda10045_init(struct dvb_frontend* fe)
+{
+ struct tda1004x_state* state = fe->demodulator_priv;
+
+ dprintk("%s\n", __func__);
+
+ if (tda10045_fwupload(fe)) {
+ printk("tda1004x: firmware upload failed\n");
+ return -EIO;
+ }
+
+ tda1004x_write_mask(state, TDA1004X_CONFADC1, 0x10, 0); // wake up the ADC
+
+ // tda setup
+ tda1004x_write_mask(state, TDA1004X_CONFC4, 0x20, 0); // disable DSP watchdog timer
+ tda1004x_write_mask(state, TDA1004X_AUTO, 8, 0); // select HP stream
+ tda1004x_write_mask(state, TDA1004X_CONFC1, 0x40, 0); // set polarity of VAGC signal
+ tda1004x_write_mask(state, TDA1004X_CONFC1, 0x80, 0x80); // enable pulse killer
+ tda1004x_write_mask(state, TDA1004X_AUTO, 0x10, 0x10); // enable auto offset
+ tda1004x_write_mask(state, TDA1004X_IN_CONF2, 0xC0, 0x0); // no frequency offset
+ tda1004x_write_byteI(state, TDA1004X_CONF_TS1, 0); // setup MPEG2 TS interface
+ tda1004x_write_byteI(state, TDA1004X_CONF_TS2, 0); // setup MPEG2 TS interface
+ tda1004x_write_mask(state, TDA1004X_VBER_MSB, 0xe0, 0xa0); // 10^6 VBER measurement bits
+ tda1004x_write_mask(state, TDA1004X_CONFC1, 0x10, 0); // VAGC polarity
+ tda1004x_write_byteI(state, TDA1004X_CONFADC1, 0x2e);
+
+ tda1004x_write_mask(state, 0x1f, 0x01, state->config->invert_oclk);
+
+ return 0;
+}
+
+static int tda10046_init(struct dvb_frontend* fe)
+{
+ struct tda1004x_state* state = fe->demodulator_priv;
+ dprintk("%s\n", __func__);
+
+ if (tda10046_fwupload(fe)) {
+ printk("tda1004x: firmware upload failed\n");
+ return -EIO;
+ }
+
+ // tda setup
+ tda1004x_write_mask(state, TDA1004X_CONFC4, 0x20, 0); // disable DSP watchdog timer
+ tda1004x_write_byteI(state, TDA1004X_AUTO, 0x87); // 100 ppm crystal, select HP stream
+ tda1004x_write_byteI(state, TDA1004X_CONFC1, 0x88); // enable pulse killer
+
+ switch (state->config->agc_config) {
+ case TDA10046_AGC_DEFAULT:
+ tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x00); // AGC setup
+ tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0xf0, 0x60); // set AGC polarities
+ break;
+ case TDA10046_AGC_IFO_AUTO_NEG:
+ tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x0a); // AGC setup
+ tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0xf0, 0x60); // set AGC polarities
+ break;
+ case TDA10046_AGC_IFO_AUTO_POS:
+ tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x0a); // AGC setup
+ tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0xf0, 0x00); // set AGC polarities
+ break;
+ case TDA10046_AGC_TDA827X:
+ tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x02); // AGC setup
+ tda1004x_write_byteI(state, TDA10046H_AGC_THR, 0x70); // AGC Threshold
+ tda1004x_write_byteI(state, TDA10046H_AGC_RENORM, 0x08); // Gain Renormalize
+ tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0xf0, 0x60); // set AGC polarities
+ break;
+ }
+ if (state->config->ts_mode == 0) {
+ tda1004x_write_mask(state, TDA10046H_CONF_TRISTATE1, 0xc0, 0x40);
+ tda1004x_write_mask(state, 0x3a, 0x80, state->config->invert_oclk << 7);
+ } else {
+ tda1004x_write_mask(state, TDA10046H_CONF_TRISTATE1, 0xc0, 0x80);
+ tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0x10,
+ state->config->invert_oclk << 4);
+ }
+ tda1004x_write_byteI(state, TDA1004X_CONFADC2, 0x38);
+ tda1004x_write_mask (state, TDA10046H_CONF_TRISTATE1, 0x3e, 0x38); // Turn IF AGC output on
+ tda1004x_write_byteI(state, TDA10046H_AGC_TUN_MIN, 0); // }
+ tda1004x_write_byteI(state, TDA10046H_AGC_TUN_MAX, 0xff); // } AGC min/max values
+ tda1004x_write_byteI(state, TDA10046H_AGC_IF_MIN, 0); // }
+ tda1004x_write_byteI(state, TDA10046H_AGC_IF_MAX, 0xff); // }
+ tda1004x_write_byteI(state, TDA10046H_AGC_GAINS, 0x12); // IF gain 2, TUN gain 1
+ tda1004x_write_byteI(state, TDA10046H_CVBER_CTRL, 0x1a); // 10^6 VBER measurement bits
+ tda1004x_write_byteI(state, TDA1004X_CONF_TS1, 7); // MPEG2 interface config
+ tda1004x_write_byteI(state, TDA1004X_CONF_TS2, 0xc0); // MPEG2 interface config
+ // tda1004x_write_mask(state, 0x50, 0x80, 0x80); // handle out of guard echoes
+
+ return 0;
+}
+
+static int tda1004x_set_fe(struct dvb_frontend *fe)
+{
+ struct dtv_frontend_properties *fe_params = &fe->dtv_property_cache;
+ struct tda1004x_state* state = fe->demodulator_priv;
+ int tmp;
+ int inversion;
+
+ dprintk("%s\n", __func__);
+
+ if (state->demod_type == TDA1004X_DEMOD_TDA10046) {
+ // setup auto offset
+ tda1004x_write_mask(state, TDA1004X_AUTO, 0x10, 0x10);
+ tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x80, 0);
+ tda1004x_write_mask(state, TDA1004X_IN_CONF2, 0xC0, 0);
+
+ // disable agc_conf[2]
+ tda1004x_write_mask(state, TDA10046H_AGC_CONF, 4, 0);
+ }
+
+ // set frequency
+ if (fe->ops.tuner_ops.set_params) {
+ fe->ops.tuner_ops.set_params(fe);
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 0);
+ }
+
+ // Hardcoded to use auto as much as possible on the TDA10045 as it
+ // is very unreliable if AUTO mode is _not_ used.
+ if (state->demod_type == TDA1004X_DEMOD_TDA10045) {
+ fe_params->code_rate_HP = FEC_AUTO;
+ fe_params->guard_interval = GUARD_INTERVAL_AUTO;
+ fe_params->transmission_mode = TRANSMISSION_MODE_AUTO;
+ }
+
+ // Set standard params.. or put them to auto
+ if ((fe_params->code_rate_HP == FEC_AUTO) ||
+ (fe_params->code_rate_LP == FEC_AUTO) ||
+ (fe_params->modulation == QAM_AUTO) ||
+ (fe_params->hierarchy == HIERARCHY_AUTO)) {
+ tda1004x_write_mask(state, TDA1004X_AUTO, 1, 1); // enable auto
+ tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x03, 0); /* turn off modulation bits */
+ tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x60, 0); // turn off hierarchy bits
+ tda1004x_write_mask(state, TDA1004X_IN_CONF2, 0x3f, 0); // turn off FEC bits
+ } else {
+ tda1004x_write_mask(state, TDA1004X_AUTO, 1, 0); // disable auto
+
+ // set HP FEC
+ tmp = tda1004x_encode_fec(fe_params->code_rate_HP);
+ if (tmp < 0)
+ return tmp;
+ tda1004x_write_mask(state, TDA1004X_IN_CONF2, 7, tmp);
+
+ // set LP FEC
+ tmp = tda1004x_encode_fec(fe_params->code_rate_LP);
+ if (tmp < 0)
+ return tmp;
+ tda1004x_write_mask(state, TDA1004X_IN_CONF2, 0x38, tmp << 3);
+
+ /* set modulation */
+ switch (fe_params->modulation) {
+ case QPSK:
+ tda1004x_write_mask(state, TDA1004X_IN_CONF1, 3, 0);
+ break;
+
+ case QAM_16:
+ tda1004x_write_mask(state, TDA1004X_IN_CONF1, 3, 1);
+ break;
+
+ case QAM_64:
+ tda1004x_write_mask(state, TDA1004X_IN_CONF1, 3, 2);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ // set hierarchy
+ switch (fe_params->hierarchy) {
+ case HIERARCHY_NONE:
+ tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x60, 0 << 5);
+ break;
+
+ case HIERARCHY_1:
+ tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x60, 1 << 5);
+ break;
+
+ case HIERARCHY_2:
+ tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x60, 2 << 5);
+ break;
+
+ case HIERARCHY_4:
+ tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x60, 3 << 5);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+ }
+
+ // set bandwidth
+ switch (state->demod_type) {
+ case TDA1004X_DEMOD_TDA10045:
+ tda10045h_set_bandwidth(state, fe_params->bandwidth_hz);
+ break;
+
+ case TDA1004X_DEMOD_TDA10046:
+ tda10046h_set_bandwidth(state, fe_params->bandwidth_hz);
+ break;
+ }
+
+ // set inversion
+ inversion = fe_params->inversion;
+ if (state->config->invert)
+ inversion = inversion ? INVERSION_OFF : INVERSION_ON;
+ switch (inversion) {
+ case INVERSION_OFF:
+ tda1004x_write_mask(state, TDA1004X_CONFC1, 0x20, 0);
+ break;
+
+ case INVERSION_ON:
+ tda1004x_write_mask(state, TDA1004X_CONFC1, 0x20, 0x20);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ // set guard interval
+ switch (fe_params->guard_interval) {
+ case GUARD_INTERVAL_1_32:
+ tda1004x_write_mask(state, TDA1004X_AUTO, 2, 0);
+ tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x0c, 0 << 2);
+ break;
+
+ case GUARD_INTERVAL_1_16:
+ tda1004x_write_mask(state, TDA1004X_AUTO, 2, 0);
+ tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x0c, 1 << 2);
+ break;
+
+ case GUARD_INTERVAL_1_8:
+ tda1004x_write_mask(state, TDA1004X_AUTO, 2, 0);
+ tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x0c, 2 << 2);
+ break;
+
+ case GUARD_INTERVAL_1_4:
+ tda1004x_write_mask(state, TDA1004X_AUTO, 2, 0);
+ tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x0c, 3 << 2);
+ break;
+
+ case GUARD_INTERVAL_AUTO:
+ tda1004x_write_mask(state, TDA1004X_AUTO, 2, 2);
+ tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x0c, 0 << 2);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ // set transmission mode
+ switch (fe_params->transmission_mode) {
+ case TRANSMISSION_MODE_2K:
+ tda1004x_write_mask(state, TDA1004X_AUTO, 4, 0);
+ tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x10, 0 << 4);
+ break;
+
+ case TRANSMISSION_MODE_8K:
+ tda1004x_write_mask(state, TDA1004X_AUTO, 4, 0);
+ tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x10, 1 << 4);
+ break;
+
+ case TRANSMISSION_MODE_AUTO:
+ tda1004x_write_mask(state, TDA1004X_AUTO, 4, 4);
+ tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x10, 0);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ // start the lock
+ switch (state->demod_type) {
+ case TDA1004X_DEMOD_TDA10045:
+ tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 8);
+ tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 0);
+ break;
+
+ case TDA1004X_DEMOD_TDA10046:
+ tda1004x_write_mask(state, TDA1004X_AUTO, 0x40, 0x40);
+ msleep(1);
+ tda1004x_write_mask(state, TDA10046H_AGC_CONF, 4, 1);
+ break;
+ }
+
+ msleep(10);
+
+ return 0;
+}
+
+static int tda1004x_get_fe(struct dvb_frontend *fe)
+{
+ struct dtv_frontend_properties *fe_params = &fe->dtv_property_cache;
+ struct tda1004x_state* state = fe->demodulator_priv;
+
+ dprintk("%s\n", __func__);
+
+ // inversion status
+ fe_params->inversion = INVERSION_OFF;
+ if (tda1004x_read_byte(state, TDA1004X_CONFC1) & 0x20)
+ fe_params->inversion = INVERSION_ON;
+ if (state->config->invert)
+ fe_params->inversion = fe_params->inversion ? INVERSION_OFF : INVERSION_ON;
+
+ // bandwidth
+ switch (state->demod_type) {
+ case TDA1004X_DEMOD_TDA10045:
+ switch (tda1004x_read_byte(state, TDA10045H_WREF_LSB)) {
+ case 0x14:
+ fe_params->bandwidth_hz = 8000000;
+ break;
+ case 0xdb:
+ fe_params->bandwidth_hz = 7000000;
+ break;
+ case 0x4f:
+ fe_params->bandwidth_hz = 6000000;
+ break;
+ }
+ break;
+ case TDA1004X_DEMOD_TDA10046:
+ switch (tda1004x_read_byte(state, TDA10046H_TIME_WREF1)) {
+ case 0x5c:
+ case 0x54:
+ fe_params->bandwidth_hz = 8000000;
+ break;
+ case 0x6a:
+ case 0x60:
+ fe_params->bandwidth_hz = 7000000;
+ break;
+ case 0x7b:
+ case 0x70:
+ fe_params->bandwidth_hz = 6000000;
+ break;
+ }
+ break;
+ }
+
+ // FEC
+ fe_params->code_rate_HP =
+ tda1004x_decode_fec(tda1004x_read_byte(state, TDA1004X_OUT_CONF2) & 7);
+ fe_params->code_rate_LP =
+ tda1004x_decode_fec((tda1004x_read_byte(state, TDA1004X_OUT_CONF2) >> 3) & 7);
+
+ /* modulation */
+ switch (tda1004x_read_byte(state, TDA1004X_OUT_CONF1) & 3) {
+ case 0:
+ fe_params->modulation = QPSK;
+ break;
+ case 1:
+ fe_params->modulation = QAM_16;
+ break;
+ case 2:
+ fe_params->modulation = QAM_64;
+ break;
+ }
+
+ // transmission mode
+ fe_params->transmission_mode = TRANSMISSION_MODE_2K;
+ if (tda1004x_read_byte(state, TDA1004X_OUT_CONF1) & 0x10)
+ fe_params->transmission_mode = TRANSMISSION_MODE_8K;
+
+ // guard interval
+ switch ((tda1004x_read_byte(state, TDA1004X_OUT_CONF1) & 0x0c) >> 2) {
+ case 0:
+ fe_params->guard_interval = GUARD_INTERVAL_1_32;
+ break;
+ case 1:
+ fe_params->guard_interval = GUARD_INTERVAL_1_16;
+ break;
+ case 2:
+ fe_params->guard_interval = GUARD_INTERVAL_1_8;
+ break;
+ case 3:
+ fe_params->guard_interval = GUARD_INTERVAL_1_4;
+ break;
+ }
+
+ // hierarchy
+ switch ((tda1004x_read_byte(state, TDA1004X_OUT_CONF1) & 0x60) >> 5) {
+ case 0:
+ fe_params->hierarchy = HIERARCHY_NONE;
+ break;
+ case 1:
+ fe_params->hierarchy = HIERARCHY_1;
+ break;
+ case 2:
+ fe_params->hierarchy = HIERARCHY_2;
+ break;
+ case 3:
+ fe_params->hierarchy = HIERARCHY_4;
+ break;
+ }
+
+ return 0;
+}
+
+static int tda1004x_read_status(struct dvb_frontend* fe, fe_status_t * fe_status)
+{
+ struct tda1004x_state* state = fe->demodulator_priv;
+ int status;
+ int cber;
+ int vber;
+
+ dprintk("%s\n", __func__);
+
+ // read status
+ status = tda1004x_read_byte(state, TDA1004X_STATUS_CD);
+ if (status == -1)
+ return -EIO;
+
+ // decode
+ *fe_status = 0;
+ if (status & 4)
+ *fe_status |= FE_HAS_SIGNAL;
+ if (status & 2)
+ *fe_status |= FE_HAS_CARRIER;
+ if (status & 8)
+ *fe_status |= FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
+
+ // if we don't already have VITERBI (i.e. not LOCKED), see if the viterbi
+ // is getting anything valid
+ if (!(*fe_status & FE_HAS_VITERBI)) {
+ // read the CBER
+ cber = tda1004x_read_byte(state, TDA1004X_CBER_LSB);
+ if (cber == -1)
+ return -EIO;
+ status = tda1004x_read_byte(state, TDA1004X_CBER_MSB);
+ if (status == -1)
+ return -EIO;
+ cber |= (status << 8);
+ // The address 0x20 should be read to cope with a TDA10046 bug
+ tda1004x_read_byte(state, TDA1004X_CBER_RESET);
+
+ if (cber != 65535)
+ *fe_status |= FE_HAS_VITERBI;
+ }
+
+ // if we DO have some valid VITERBI output, but don't already have SYNC
+ // bytes (i.e. not LOCKED), see if the RS decoder is getting anything valid.
+ if ((*fe_status & FE_HAS_VITERBI) && (!(*fe_status & FE_HAS_SYNC))) {
+ // read the VBER
+ vber = tda1004x_read_byte(state, TDA1004X_VBER_LSB);
+ if (vber == -1)
+ return -EIO;
+ status = tda1004x_read_byte(state, TDA1004X_VBER_MID);
+ if (status == -1)
+ return -EIO;
+ vber |= (status << 8);
+ status = tda1004x_read_byte(state, TDA1004X_VBER_MSB);
+ if (status == -1)
+ return -EIO;
+ vber |= (status & 0x0f) << 16;
+ // The CVBER_LUT should be read to cope with TDA10046 hardware bug
+ tda1004x_read_byte(state, TDA1004X_CVBER_LUT);
+
+ // if RS has passed some valid TS packets, then we must be
+ // getting some SYNC bytes
+ if (vber < 16632)
+ *fe_status |= FE_HAS_SYNC;
+ }
+
+ // success
+ dprintk("%s: fe_status=0x%x\n", __func__, *fe_status);
+ return 0;
+}
+
+static int tda1004x_read_signal_strength(struct dvb_frontend* fe, u16 * signal)
+{
+ struct tda1004x_state* state = fe->demodulator_priv;
+ int tmp;
+ int reg = 0;
+
+ dprintk("%s\n", __func__);
+
+ // determine the register to use
+ switch (state->demod_type) {
+ case TDA1004X_DEMOD_TDA10045:
+ reg = TDA10045H_S_AGC;
+ break;
+
+ case TDA1004X_DEMOD_TDA10046:
+ reg = TDA10046H_AGC_IF_LEVEL;
+ break;
+ }
+
+ // read it
+ tmp = tda1004x_read_byte(state, reg);
+ if (tmp < 0)
+ return -EIO;
+
+ *signal = (tmp << 8) | tmp;
+ dprintk("%s: signal=0x%x\n", __func__, *signal);
+ return 0;
+}
+
+static int tda1004x_read_snr(struct dvb_frontend* fe, u16 * snr)
+{
+ struct tda1004x_state* state = fe->demodulator_priv;
+ int tmp;
+
+ dprintk("%s\n", __func__);
+
+ // read it
+ tmp = tda1004x_read_byte(state, TDA1004X_SNR);
+ if (tmp < 0)
+ return -EIO;
+ tmp = 255 - tmp;
+
+ *snr = ((tmp << 8) | tmp);
+ dprintk("%s: snr=0x%x\n", __func__, *snr);
+ return 0;
+}
+
+static int tda1004x_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
+{
+ struct tda1004x_state* state = fe->demodulator_priv;
+ int tmp;
+ int tmp2;
+ int counter;
+
+ dprintk("%s\n", __func__);
+
+ // read the UCBLOCKS and reset
+ counter = 0;
+ tmp = tda1004x_read_byte(state, TDA1004X_UNCOR);
+ if (tmp < 0)
+ return -EIO;
+ tmp &= 0x7f;
+ while (counter++ < 5) {
+ tda1004x_write_mask(state, TDA1004X_UNCOR, 0x80, 0);
+ tda1004x_write_mask(state, TDA1004X_UNCOR, 0x80, 0);
+ tda1004x_write_mask(state, TDA1004X_UNCOR, 0x80, 0);
+
+ tmp2 = tda1004x_read_byte(state, TDA1004X_UNCOR);
+ if (tmp2 < 0)
+ return -EIO;
+ tmp2 &= 0x7f;
+ if ((tmp2 < tmp) || (tmp2 == 0))
+ break;
+ }
+
+ if (tmp != 0x7f)
+ *ucblocks = tmp;
+ else
+ *ucblocks = 0xffffffff;
+
+ dprintk("%s: ucblocks=0x%x\n", __func__, *ucblocks);
+ return 0;
+}
+
+static int tda1004x_read_ber(struct dvb_frontend* fe, u32* ber)
+{
+ struct tda1004x_state* state = fe->demodulator_priv;
+ int tmp;
+
+ dprintk("%s\n", __func__);
+
+ // read it in
+ tmp = tda1004x_read_byte(state, TDA1004X_CBER_LSB);
+ if (tmp < 0)
+ return -EIO;
+ *ber = tmp << 1;
+ tmp = tda1004x_read_byte(state, TDA1004X_CBER_MSB);
+ if (tmp < 0)
+ return -EIO;
+ *ber |= (tmp << 9);
+ // The address 0x20 should be read to cope with a TDA10046 bug
+ tda1004x_read_byte(state, TDA1004X_CBER_RESET);
+
+ dprintk("%s: ber=0x%x\n", __func__, *ber);
+ return 0;
+}
+
+static int tda1004x_sleep(struct dvb_frontend* fe)
+{
+ struct tda1004x_state* state = fe->demodulator_priv;
+ int gpio_conf;
+
+ switch (state->demod_type) {
+ case TDA1004X_DEMOD_TDA10045:
+ tda1004x_write_mask(state, TDA1004X_CONFADC1, 0x10, 0x10);
+ break;
+
+ case TDA1004X_DEMOD_TDA10046:
+ /* set outputs to tristate */
+ tda1004x_write_byteI(state, TDA10046H_CONF_TRISTATE1, 0xff);
+ /* invert GPIO 1 and 3 if desired*/
+ gpio_conf = state->config->gpio_config;
+ if (gpio_conf >= TDA10046_GP00_I)
+ tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0x0f,
+ (gpio_conf & 0x0f) ^ 0x0a);
+
+ tda1004x_write_mask(state, TDA1004X_CONFADC2, 0xc0, 0xc0);
+ tda1004x_write_mask(state, TDA1004X_CONFC4, 1, 1);
+ break;
+ }
+
+ return 0;
+}
+
+static int tda1004x_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
+{
+ struct tda1004x_state* state = fe->demodulator_priv;
+
+ if (enable) {
+ return tda1004x_enable_tuner_i2c(state);
+ } else {
+ return tda1004x_disable_tuner_i2c(state);
+ }
+}
+
+static int tda1004x_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
+{
+ fesettings->min_delay_ms = 800;
+ /* Drift compensation makes no sense for DVB-T */
+ fesettings->step_size = 0;
+ fesettings->max_drift = 0;
+ return 0;
+}
+
+static void tda1004x_release(struct dvb_frontend* fe)
+{
+ struct tda1004x_state *state = fe->demodulator_priv;
+ kfree(state);
+}
+
+static struct dvb_frontend_ops tda10045_ops = {
+ .delsys = { SYS_DVBT },
+ .info = {
+ .name = "Philips TDA10045H DVB-T",
+ .frequency_min = 51000000,
+ .frequency_max = 858000000,
+ .frequency_stepsize = 166667,
+ .caps =
+ FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+ FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+ FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
+ FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO
+ },
+
+ .release = tda1004x_release,
+
+ .init = tda10045_init,
+ .sleep = tda1004x_sleep,
+ .write = tda1004x_write,
+ .i2c_gate_ctrl = tda1004x_i2c_gate_ctrl,
+
+ .set_frontend = tda1004x_set_fe,
+ .get_frontend = tda1004x_get_fe,
+ .get_tune_settings = tda1004x_get_tune_settings,
+
+ .read_status = tda1004x_read_status,
+ .read_ber = tda1004x_read_ber,
+ .read_signal_strength = tda1004x_read_signal_strength,
+ .read_snr = tda1004x_read_snr,
+ .read_ucblocks = tda1004x_read_ucblocks,
+};
+
+struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config,
+ struct i2c_adapter* i2c)
+{
+ struct tda1004x_state *state;
+ int id;
+
+ /* allocate memory for the internal state */
+ state = kzalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
+ if (!state) {
+ printk(KERN_ERR "Can't allocate memory for tda10045 state\n");
+ return NULL;
+ }
+
+ /* setup the state */
+ state->config = config;
+ state->i2c = i2c;
+ state->demod_type = TDA1004X_DEMOD_TDA10045;
+
+ /* check if the demod is there */
+ id = tda1004x_read_byte(state, TDA1004X_CHIPID);
+ if (id < 0) {
+ printk(KERN_ERR "tda10045: chip is not answering. Giving up.\n");
+ kfree(state);
+ return NULL;
+ }
+
+ if (id != 0x25) {
+ printk(KERN_ERR "Invalid tda1004x ID = 0x%02x. Can't proceed\n", id);
+ kfree(state);
+ return NULL;
+ }
+
+ /* create dvb_frontend */
+ memcpy(&state->frontend.ops, &tda10045_ops, sizeof(struct dvb_frontend_ops));
+ state->frontend.demodulator_priv = state;
+ return &state->frontend;
+}
+
+static struct dvb_frontend_ops tda10046_ops = {
+ .delsys = { SYS_DVBT },
+ .info = {
+ .name = "Philips TDA10046H DVB-T",
+ .frequency_min = 51000000,
+ .frequency_max = 858000000,
+ .frequency_stepsize = 166667,
+ .caps =
+ FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+ FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+ FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
+ FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO
+ },
+
+ .release = tda1004x_release,
+
+ .init = tda10046_init,
+ .sleep = tda1004x_sleep,
+ .write = tda1004x_write,
+ .i2c_gate_ctrl = tda1004x_i2c_gate_ctrl,
+
+ .set_frontend = tda1004x_set_fe,
+ .get_frontend = tda1004x_get_fe,
+ .get_tune_settings = tda1004x_get_tune_settings,
+
+ .read_status = tda1004x_read_status,
+ .read_ber = tda1004x_read_ber,
+ .read_signal_strength = tda1004x_read_signal_strength,
+ .read_snr = tda1004x_read_snr,
+ .read_ucblocks = tda1004x_read_ucblocks,
+};
+
+struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config,
+ struct i2c_adapter* i2c)
+{
+ struct tda1004x_state *state;
+ int id;
+
+ /* allocate memory for the internal state */
+ state = kzalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
+ if (!state) {
+ printk(KERN_ERR "Can't allocate memory for tda10046 state\n");
+ return NULL;
+ }
+
+ /* setup the state */
+ state->config = config;
+ state->i2c = i2c;
+ state->demod_type = TDA1004X_DEMOD_TDA10046;
+
+ /* check if the demod is there */
+ id = tda1004x_read_byte(state, TDA1004X_CHIPID);
+ if (id < 0) {
+ printk(KERN_ERR "tda10046: chip is not answering. Giving up.\n");
+ kfree(state);
+ return NULL;
+ }
+ if (id != 0x46) {
+ printk(KERN_ERR "Invalid tda1004x ID = 0x%02x. Can't proceed\n", id);
+ kfree(state);
+ return NULL;
+ }
+
+ /* create dvb_frontend */
+ memcpy(&state->frontend.ops, &tda10046_ops, sizeof(struct dvb_frontend_ops));
+ state->frontend.demodulator_priv = state;
+ return &state->frontend;
+}
+
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
+
+MODULE_DESCRIPTION("Philips TDA10045H & TDA10046H DVB-T Demodulator");
+MODULE_AUTHOR("Andrew de Quincey & Robert Schlabbach");
+MODULE_LICENSE("GPL");
+
+EXPORT_SYMBOL(tda10045_attach);
+EXPORT_SYMBOL(tda10046_attach);
Code Review / kvmfornfv.git / blobdiff