--- /dev/null
+/*
+ * CIMaX SP2/SP2HF (Atmel T90FJR) CI driver
+ *
+ * Copyright (C) 2014 Olli Salonen <olli.salonen@iki.fi>
+ *
+ * Heavily based on CIMax2(R) SP2 driver in conjunction with NetUp Dual
+ * DVB-S2 CI card (cimax2) with following copyrights:
+ *
+ * Copyright (C) 2009 NetUP Inc.
+ * Copyright (C) 2009 Igor M. Liplianin <liplianin@netup.ru>
+ * Copyright (C) 2009 Abylay Ospan <aospan@netup.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "sp2_priv.h"
+
+static int sp2_read_i2c(struct sp2 *s, u8 reg, u8 *buf, int len)
+{
+ int ret;
+ struct i2c_client *client = s->client;
+ struct i2c_adapter *adap = client->adapter;
+ struct i2c_msg msg[] = {
+ {
+ .addr = client->addr,
+ .flags = 0,
+ .buf = ®,
+ .len = 1
+ }, {
+ .addr = client->addr,
+ .flags = I2C_M_RD,
+ .buf = buf,
+ .len = len
+ }
+ };
+
+ ret = i2c_transfer(adap, msg, 2);
+
+ if (ret != 2) {
+ dev_err(&client->dev, "i2c read error, reg = 0x%02x, status = %d\n",
+ reg, ret);
+ if (ret < 0)
+ return ret;
+ else
+ return -EIO;
+ }
+
+ dev_dbg(&s->client->dev, "addr=0x%04x, reg = 0x%02x, data = %02x\n",
+ client->addr, reg, buf[0]);
+
+ return 0;
+}
+
+static int sp2_write_i2c(struct sp2 *s, u8 reg, u8 *buf, int len)
+{
+ int ret;
+ u8 buffer[35];
+ struct i2c_client *client = s->client;
+ struct i2c_adapter *adap = client->adapter;
+ struct i2c_msg msg = {
+ .addr = client->addr,
+ .flags = 0,
+ .buf = &buffer[0],
+ .len = len + 1
+ };
+
+ if ((len + 1) > sizeof(buffer)) {
+ dev_err(&client->dev, "i2c wr reg=%02x: len=%d is too big!\n",
+ reg, len);
+ return -EINVAL;
+ }
+
+ buffer[0] = reg;
+ memcpy(&buffer[1], buf, len);
+
+ ret = i2c_transfer(adap, &msg, 1);
+
+ if (ret != 1) {
+ dev_err(&client->dev, "i2c write error, reg = 0x%02x, status = %d\n",
+ reg, ret);
+ if (ret < 0)
+ return ret;
+ else
+ return -EIO;
+ }
+
+ dev_dbg(&s->client->dev, "addr=0x%04x, reg = 0x%02x, data = %*ph\n",
+ client->addr, reg, len, buf);
+
+ return 0;
+}
+
+static int sp2_ci_op_cam(struct dvb_ca_en50221 *en50221, int slot, u8 acs,
+ u8 read, int addr, u8 data)
+{
+ struct sp2 *s = en50221->data;
+ u8 store;
+ int mem, ret;
+ int (*ci_op_cam)(void*, u8, int, u8, int*) = s->ci_control;
+
+ if (slot != 0)
+ return -EINVAL;
+
+ /*
+ * change module access type between IO space and attribute memory
+ * when needed
+ */
+ if (s->module_access_type != acs) {
+ ret = sp2_read_i2c(s, 0x00, &store, 1);
+
+ if (ret)
+ return ret;
+
+ store &= ~(SP2_MOD_CTL_ACS1 | SP2_MOD_CTL_ACS0);
+ store |= acs;
+
+ ret = sp2_write_i2c(s, 0x00, &store, 1);
+ if (ret)
+ return ret;
+ }
+
+ s->module_access_type = acs;
+
+ /* implementation of ci_op_cam is device specific */
+ if (ci_op_cam) {
+ ret = ci_op_cam(s->priv, read, addr, data, &mem);
+ } else {
+ dev_err(&s->client->dev, "callback not defined");
+ return -EINVAL;
+ }
+
+ if (ret)
+ return ret;
+
+ dev_dbg(&s->client->dev, "%s: slot=%d, addr=0x%04x, %s, data=%x",
+ (read) ? "read" : "write", slot, addr,
+ (acs == SP2_CI_ATTR_ACS) ? "attr" : "io",
+ (read) ? mem : data);
+
+ if (read)
+ return mem;
+ else
+ return 0;
+
+}
+
+int sp2_ci_read_attribute_mem(struct dvb_ca_en50221 *en50221,
+ int slot, int addr)
+{
+ return sp2_ci_op_cam(en50221, slot, SP2_CI_ATTR_ACS,
+ SP2_CI_RD, addr, 0);
+}
+
+int sp2_ci_write_attribute_mem(struct dvb_ca_en50221 *en50221,
+ int slot, int addr, u8 data)
+{
+ return sp2_ci_op_cam(en50221, slot, SP2_CI_ATTR_ACS,
+ SP2_CI_WR, addr, data);
+}
+
+int sp2_ci_read_cam_control(struct dvb_ca_en50221 *en50221,
+ int slot, u8 addr)
+{
+ return sp2_ci_op_cam(en50221, slot, SP2_CI_IO_ACS,
+ SP2_CI_RD, addr, 0);
+}
+
+int sp2_ci_write_cam_control(struct dvb_ca_en50221 *en50221,
+ int slot, u8 addr, u8 data)
+{
+ return sp2_ci_op_cam(en50221, slot, SP2_CI_IO_ACS,
+ SP2_CI_WR, addr, data);
+}
+
+int sp2_ci_slot_reset(struct dvb_ca_en50221 *en50221, int slot)
+{
+ struct sp2 *s = en50221->data;
+ u8 buf;
+ int ret;
+
+ dev_dbg(&s->client->dev, "slot: %d\n", slot);
+
+ if (slot != 0)
+ return -EINVAL;
+
+ /* RST on */
+ buf = SP2_MOD_CTL_RST;
+ ret = sp2_write_i2c(s, 0x00, &buf, 1);
+
+ if (ret)
+ return ret;
+
+ usleep_range(500, 600);
+
+ /* RST off */
+ buf = 0x00;
+ ret = sp2_write_i2c(s, 0x00, &buf, 1);
+
+ if (ret)
+ return ret;
+
+ msleep(1000);
+
+ return 0;
+}
+
+int sp2_ci_slot_shutdown(struct dvb_ca_en50221 *en50221, int slot)
+{
+ struct sp2 *s = en50221->data;
+
+ dev_dbg(&s->client->dev, "slot:%d\n", slot);
+
+ /* not implemented */
+ return 0;
+}
+
+int sp2_ci_slot_ts_enable(struct dvb_ca_en50221 *en50221, int slot)
+{
+ struct sp2 *s = en50221->data;
+ u8 buf;
+
+ dev_dbg(&s->client->dev, "slot:%d\n", slot);
+
+ if (slot != 0)
+ return -EINVAL;
+
+ sp2_read_i2c(s, 0x00, &buf, 1);
+
+ /* disable bypass and enable TS */
+ buf |= (SP2_MOD_CTL_TSOEN | SP2_MOD_CTL_TSIEN);
+ return sp2_write_i2c(s, 0, &buf, 1);
+}
+
+int sp2_ci_poll_slot_status(struct dvb_ca_en50221 *en50221,
+ int slot, int open)
+{
+ struct sp2 *s = en50221->data;
+ u8 buf[2];
+ int ret;
+
+ dev_dbg(&s->client->dev, "slot:%d open:%d\n", slot, open);
+
+ /*
+ * CAM module INSERT/REMOVE processing. Slow operation because of i2c
+ * transfers. Throttle read to one per sec.
+ */
+ if (time_after(jiffies, s->next_status_checked_time)) {
+ ret = sp2_read_i2c(s, 0x00, buf, 1);
+ s->next_status_checked_time = jiffies + msecs_to_jiffies(1000);
+
+ if (ret)
+ return 0;
+
+ if (buf[0] & SP2_MOD_CTL_DET)
+ s->status = DVB_CA_EN50221_POLL_CAM_PRESENT |
+ DVB_CA_EN50221_POLL_CAM_READY;
+ else
+ s->status = 0;
+ }
+
+ return s->status;
+}
+
+static int sp2_init(struct sp2 *s)
+{
+ int ret = 0;
+ u8 buf;
+ u8 cimax_init[34] = {
+ 0x00, /* module A control*/
+ 0x00, /* auto select mask high A */
+ 0x00, /* auto select mask low A */
+ 0x00, /* auto select pattern high A */
+ 0x00, /* auto select pattern low A */
+ 0x44, /* memory access time A, 600 ns */
+ 0x00, /* invert input A */
+ 0x00, /* RFU */
+ 0x00, /* RFU */
+ 0x00, /* module B control*/
+ 0x00, /* auto select mask high B */
+ 0x00, /* auto select mask low B */
+ 0x00, /* auto select pattern high B */
+ 0x00, /* auto select pattern low B */
+ 0x44, /* memory access time B, 600 ns */
+ 0x00, /* invert input B */
+ 0x00, /* RFU */
+ 0x00, /* RFU */
+ 0x00, /* auto select mask high Ext */
+ 0x00, /* auto select mask low Ext */
+ 0x00, /* auto select pattern high Ext */
+ 0x00, /* auto select pattern low Ext */
+ 0x00, /* RFU */
+ 0x02, /* destination - module A */
+ 0x01, /* power control reg, VCC power on */
+ 0x00, /* RFU */
+ 0x00, /* int status read only */
+ 0x00, /* Interrupt Mask Register */
+ 0x05, /* EXTINT=active-high, INT=push-pull */
+ 0x00, /* USCG1 */
+ 0x04, /* ack active low */
+ 0x00, /* LOCK = 0 */
+ 0x22, /* unknown */
+ 0x00, /* synchronization? */
+ };
+
+ dev_dbg(&s->client->dev, "\n");
+
+ s->ca.owner = THIS_MODULE;
+ s->ca.read_attribute_mem = sp2_ci_read_attribute_mem;
+ s->ca.write_attribute_mem = sp2_ci_write_attribute_mem;
+ s->ca.read_cam_control = sp2_ci_read_cam_control;
+ s->ca.write_cam_control = sp2_ci_write_cam_control;
+ s->ca.slot_reset = sp2_ci_slot_reset;
+ s->ca.slot_shutdown = sp2_ci_slot_shutdown;
+ s->ca.slot_ts_enable = sp2_ci_slot_ts_enable;
+ s->ca.poll_slot_status = sp2_ci_poll_slot_status;
+ s->ca.data = s;
+ s->module_access_type = 0;
+
+ /* initialize all regs */
+ ret = sp2_write_i2c(s, 0x00, &cimax_init[0], 34);
+ if (ret)
+ goto err;
+
+ /* lock registers */
+ buf = 1;
+ ret = sp2_write_i2c(s, 0x1f, &buf, 1);
+ if (ret)
+ goto err;
+
+ /* power on slots */
+ ret = sp2_write_i2c(s, 0x18, &buf, 1);
+ if (ret)
+ goto err;
+
+ ret = dvb_ca_en50221_init(s->dvb_adap, &s->ca, 0, 1);
+ if (ret)
+ goto err;
+
+ return 0;
+
+err:
+ dev_dbg(&s->client->dev, "init failed=%d\n", ret);
+ return ret;
+}
+
+static int sp2_exit(struct i2c_client *client)
+{
+ struct sp2 *s;
+
+ dev_dbg(&client->dev, "\n");
+
+ if (client == NULL)
+ return 0;
+
+ s = i2c_get_clientdata(client);
+ if (s == NULL)
+ return 0;
+
+ if (s->ca.data == NULL)
+ return 0;
+
+ dvb_ca_en50221_release(&s->ca);
+
+ return 0;
+}
+
+static int sp2_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct sp2_config *cfg = client->dev.platform_data;
+ struct sp2 *s;
+ int ret;
+
+ dev_dbg(&client->dev, "\n");
+
+ s = kzalloc(sizeof(struct sp2), GFP_KERNEL);
+ if (!s) {
+ ret = -ENOMEM;
+ dev_err(&client->dev, "kzalloc() failed\n");
+ goto err;
+ }
+
+ s->client = client;
+ s->dvb_adap = cfg->dvb_adap;
+ s->priv = cfg->priv;
+ s->ci_control = cfg->ci_control;
+
+ i2c_set_clientdata(client, s);
+
+ ret = sp2_init(s);
+ if (ret)
+ goto err;
+
+ dev_info(&s->client->dev, "CIMaX SP2 successfully attached\n");
+ return 0;
+err:
+ dev_dbg(&client->dev, "init failed=%d\n", ret);
+ kfree(s);
+
+ return ret;
+}
+
+static int sp2_remove(struct i2c_client *client)
+{
+ struct sp2 *s = i2c_get_clientdata(client);
+
+ dev_dbg(&client->dev, "\n");
+ sp2_exit(client);
+ kfree(s);
+ return 0;
+}
+
+static const struct i2c_device_id sp2_id[] = {
+ {"sp2", 0},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, sp2_id);
+
+static struct i2c_driver sp2_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "sp2",
+ },
+ .probe = sp2_probe,
+ .remove = sp2_remove,
+ .id_table = sp2_id,
+};
+
+module_i2c_driver(sp2_driver);
+
+MODULE_DESCRIPTION("CIMaX SP2/HF CI driver");
+MODULE_AUTHOR("Olli Salonen <olli.salonen@iki.fi>");
+MODULE_LICENSE("GPL");
Code Review / kvmfornfv.git / blobdiff