--- /dev/null
+/*
+ * Device driver for the i2c thermostat found on the iBook G4, Albook G4
+ *
+ * Copyright (C) 2003, 2004 Colin Leroy, Rasmus Rohde, Benjamin Herrenschmidt
+ *
+ * Documentation from 115254175ADT7467_pra.pdf and 3686221171167ADT7460_b.pdf
+ * http://www.onsemi.com/PowerSolutions/product.do?id=ADT7467
+ * http://www.onsemi.com/PowerSolutions/product.do?id=ADT7460
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <linux/suspend.h>
+#include <linux/kthread.h>
+#include <linux/moduleparam.h>
+#include <linux/freezer.h>
+#include <linux/of_platform.h>
+
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/io.h>
+#include <asm/sections.h>
+
+#undef DEBUG
+
+#define CONFIG_REG 0x40
+#define MANUAL_MASK 0xe0
+#define AUTO_MASK 0x20
+#define INVERT_MASK 0x10
+
+static u8 TEMP_REG[3] = {0x26, 0x25, 0x27}; /* local, sensor1, sensor2 */
+static u8 LIMIT_REG[3] = {0x6b, 0x6a, 0x6c}; /* local, sensor1, sensor2 */
+static u8 MANUAL_MODE[2] = {0x5c, 0x5d};
+static u8 REM_CONTROL[2] = {0x00, 0x40};
+static u8 FAN_SPEED[2] = {0x28, 0x2a};
+static u8 FAN_SPD_SET[2] = {0x30, 0x31};
+
+static u8 default_limits_local[3] = {70, 50, 70}; /* local, sensor1, sensor2 */
+static u8 default_limits_chip[3] = {80, 65, 80}; /* local, sensor1, sensor2 */
+static const char *sensor_location[3] = { "?", "?", "?" };
+
+static int limit_adjust;
+static int fan_speed = -1;
+static bool verbose;
+
+MODULE_AUTHOR("Colin Leroy <colin@colino.net>");
+MODULE_DESCRIPTION("Driver for ADT746x thermostat in iBook G4 and "
+ "Powerbook G4 Alu");
+MODULE_LICENSE("GPL");
+
+module_param(limit_adjust, int, 0644);
+MODULE_PARM_DESC(limit_adjust,"Adjust maximum temperatures (50 sensor1, 70 sensor2) "
+ "by N degrees.");
+
+module_param(fan_speed, int, 0644);
+MODULE_PARM_DESC(fan_speed,"Specify starting fan speed (0-255) "
+ "(default 64)");
+
+module_param(verbose, bool, 0);
+MODULE_PARM_DESC(verbose,"Verbose log operations "
+ "(default 0)");
+
+struct thermostat {
+ struct i2c_client *clt;
+ u8 temps[3];
+ u8 cached_temp[3];
+ u8 initial_limits[3];
+ u8 limits[3];
+ int last_speed[2];
+ int last_var[2];
+ int pwm_inv[2];
+ struct task_struct *thread;
+ struct platform_device *pdev;
+ enum {
+ ADT7460,
+ ADT7467
+ } type;
+};
+
+static void write_both_fan_speed(struct thermostat *th, int speed);
+static void write_fan_speed(struct thermostat *th, int speed, int fan);
+
+static int
+write_reg(struct thermostat* th, int reg, u8 data)
+{
+ u8 tmp[2];
+ int rc;
+
+ tmp[0] = reg;
+ tmp[1] = data;
+ rc = i2c_master_send(th->clt, (const char *)tmp, 2);
+ if (rc < 0)
+ return rc;
+ if (rc != 2)
+ return -ENODEV;
+ return 0;
+}
+
+static int
+read_reg(struct thermostat* th, int reg)
+{
+ u8 reg_addr, data;
+ int rc;
+
+ reg_addr = (u8)reg;
+ rc = i2c_master_send(th->clt, ®_addr, 1);
+ if (rc < 0)
+ return rc;
+ if (rc != 1)
+ return -ENODEV;
+ rc = i2c_master_recv(th->clt, (char *)&data, 1);
+ if (rc < 0)
+ return rc;
+ return data;
+}
+
+static int read_fan_speed(struct thermostat *th, u8 addr)
+{
+ u8 tmp[2];
+ u16 res;
+
+ /* should start with low byte */
+ tmp[1] = read_reg(th, addr);
+ tmp[0] = read_reg(th, addr + 1);
+
+ res = tmp[1] + (tmp[0] << 8);
+ /* "a value of 0xffff means that the fan has stopped" */
+ return (res == 0xffff ? 0 : (90000*60)/res);
+}
+
+static void write_both_fan_speed(struct thermostat *th, int speed)
+{
+ write_fan_speed(th, speed, 0);
+ if (th->type == ADT7460)
+ write_fan_speed(th, speed, 1);
+}
+
+static void write_fan_speed(struct thermostat *th, int speed, int fan)
+{
+ u8 manual;
+
+ if (speed > 0xff)
+ speed = 0xff;
+ else if (speed < -1)
+ speed = 0;
+
+ if (th->type == ADT7467 && fan == 1)
+ return;
+
+ if (th->last_speed[fan] != speed) {
+ if (verbose) {
+ if (speed == -1)
+ printk(KERN_DEBUG "adt746x: Setting speed to automatic "
+ "for %s fan.\n", sensor_location[fan+1]);
+ else
+ printk(KERN_DEBUG "adt746x: Setting speed to %d "
+ "for %s fan.\n", speed, sensor_location[fan+1]);
+ }
+ } else
+ return;
+
+ if (speed >= 0) {
+ manual = read_reg(th, MANUAL_MODE[fan]);
+ manual &= ~INVERT_MASK;
+ write_reg(th, MANUAL_MODE[fan],
+ manual | MANUAL_MASK | th->pwm_inv[fan]);
+ write_reg(th, FAN_SPD_SET[fan], speed);
+ } else {
+ /* back to automatic */
+ if(th->type == ADT7460) {
+ manual = read_reg(th,
+ MANUAL_MODE[fan]) & (~MANUAL_MASK);
+ manual &= ~INVERT_MASK;
+ manual |= th->pwm_inv[fan];
+ write_reg(th,
+ MANUAL_MODE[fan], manual|REM_CONTROL[fan]);
+ } else {
+ manual = read_reg(th, MANUAL_MODE[fan]);
+ manual &= ~INVERT_MASK;
+ manual |= th->pwm_inv[fan];
+ write_reg(th, MANUAL_MODE[fan], manual&(~AUTO_MASK));
+ }
+ }
+
+ th->last_speed[fan] = speed;
+}
+
+static void read_sensors(struct thermostat *th)
+{
+ int i = 0;
+
+ for (i = 0; i < 3; i++)
+ th->temps[i] = read_reg(th, TEMP_REG[i]);
+}
+
+#ifdef DEBUG
+static void display_stats(struct thermostat *th)
+{
+ if (th->temps[0] != th->cached_temp[0]
+ || th->temps[1] != th->cached_temp[1]
+ || th->temps[2] != th->cached_temp[2]) {
+ printk(KERN_INFO "adt746x: Temperature infos:"
+ " thermostats: %d,%d,%d;"
+ " limits: %d,%d,%d;"
+ " fan speed: %d RPM\n",
+ th->temps[0], th->temps[1], th->temps[2],
+ th->limits[0], th->limits[1], th->limits[2],
+ read_fan_speed(th, FAN_SPEED[0]));
+ }
+ th->cached_temp[0] = th->temps[0];
+ th->cached_temp[1] = th->temps[1];
+ th->cached_temp[2] = th->temps[2];
+}
+#endif
+
+static void update_fans_speed (struct thermostat *th)
+{
+ int lastvar = 0; /* last variation, for iBook */
+ int i = 0;
+
+ /* we don't care about local sensor, so we start at sensor 1 */
+ for (i = 1; i < 3; i++) {
+ int started = 0;
+ int fan_number = (th->type == ADT7460 && i == 2);
+ int var = th->temps[i] - th->limits[i];
+
+ if (var > -1) {
+ int step = (255 - fan_speed) / 7;
+ int new_speed = 0;
+
+ /* hysteresis : change fan speed only if variation is
+ * more than two degrees */
+ if (abs(var - th->last_var[fan_number]) < 2)
+ continue;
+
+ started = 1;
+ new_speed = fan_speed + ((var-1)*step);
+
+ if (new_speed < fan_speed)
+ new_speed = fan_speed;
+ if (new_speed > 255)
+ new_speed = 255;
+
+ if (verbose)
+ printk(KERN_DEBUG "adt746x: Setting fans speed to %d "
+ "(limit exceeded by %d on %s)\n",
+ new_speed, var,
+ sensor_location[fan_number+1]);
+ write_both_fan_speed(th, new_speed);
+ th->last_var[fan_number] = var;
+ } else if (var < -2) {
+ /* don't stop fan if sensor2 is cold and sensor1 is not
+ * so cold (lastvar >= -1) */
+ if (i == 2 && lastvar < -1) {
+ if (th->last_speed[fan_number] != 0)
+ if (verbose)
+ printk(KERN_DEBUG "adt746x: Stopping "
+ "fans.\n");
+ write_both_fan_speed(th, 0);
+ }
+ }
+
+ lastvar = var;
+
+ if (started)
+ return; /* we don't want to re-stop the fan
+ * if sensor1 is heating and sensor2 is not */
+ }
+}
+
+static int monitor_task(void *arg)
+{
+ struct thermostat* th = arg;
+
+ set_freezable();
+ while(!kthread_should_stop()) {
+ try_to_freeze();
+ msleep_interruptible(2000);
+
+#ifndef DEBUG
+ if (fan_speed != -1)
+ read_sensors(th);
+#else
+ read_sensors(th);
+#endif
+
+ if (fan_speed != -1)
+ update_fans_speed(th);
+
+#ifdef DEBUG
+ display_stats(th);
+#endif
+
+ }
+
+ return 0;
+}
+
+static void set_limit(struct thermostat *th, int i)
+{
+ /* Set sensor1 limit higher to avoid powerdowns */
+ th->limits[i] = default_limits_chip[i] + limit_adjust;
+ write_reg(th, LIMIT_REG[i], th->limits[i]);
+
+ /* set our limits to normal */
+ th->limits[i] = default_limits_local[i] + limit_adjust;
+}
+
+#define BUILD_SHOW_FUNC_INT(name, data) \
+static ssize_t show_##name(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+ struct thermostat *th = dev_get_drvdata(dev); \
+ return sprintf(buf, "%d\n", data); \
+}
+
+#define BUILD_SHOW_FUNC_INT_LITE(name, data) \
+static ssize_t show_##name(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+ return sprintf(buf, "%d\n", data); \
+}
+
+#define BUILD_SHOW_FUNC_STR(name, data) \
+static ssize_t show_##name(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+ return sprintf(buf, "%s\n", data); \
+}
+
+#define BUILD_SHOW_FUNC_FAN(name, data) \
+static ssize_t show_##name(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+ struct thermostat *th = dev_get_drvdata(dev); \
+ return sprintf(buf, "%d (%d rpm)\n", \
+ th->last_speed[data], \
+ read_fan_speed(th, FAN_SPEED[data]) \
+ ); \
+}
+
+#define BUILD_STORE_FUNC_DEG(name, data) \
+static ssize_t store_##name(struct device *dev, struct device_attribute *attr, const char *buf, size_t n) \
+{ \
+ struct thermostat *th = dev_get_drvdata(dev); \
+ int val; \
+ int i; \
+ val = simple_strtol(buf, NULL, 10); \
+ printk(KERN_INFO "Adjusting limits by %d degrees\n", val); \
+ limit_adjust = val; \
+ for (i=0; i < 3; i++) \
+ set_limit(th, i); \
+ return n; \
+}
+
+#define BUILD_STORE_FUNC_INT(name, data) \
+static ssize_t store_##name(struct device *dev, struct device_attribute *attr, const char *buf, size_t n) \
+{ \
+ int val; \
+ val = simple_strtol(buf, NULL, 10); \
+ if (val < 0 || val > 255) \
+ return -EINVAL; \
+ printk(KERN_INFO "Setting specified fan speed to %d\n", val); \
+ data = val; \
+ return n; \
+}
+
+BUILD_SHOW_FUNC_INT(sensor1_temperature, (read_reg(th, TEMP_REG[1])))
+BUILD_SHOW_FUNC_INT(sensor2_temperature, (read_reg(th, TEMP_REG[2])))
+BUILD_SHOW_FUNC_INT(sensor1_limit, th->limits[1])
+BUILD_SHOW_FUNC_INT(sensor2_limit, th->limits[2])
+BUILD_SHOW_FUNC_STR(sensor1_location, sensor_location[1])
+BUILD_SHOW_FUNC_STR(sensor2_location, sensor_location[2])
+
+BUILD_SHOW_FUNC_INT_LITE(specified_fan_speed, fan_speed)
+BUILD_STORE_FUNC_INT(specified_fan_speed,fan_speed)
+
+BUILD_SHOW_FUNC_FAN(sensor1_fan_speed, 0)
+BUILD_SHOW_FUNC_FAN(sensor2_fan_speed, 1)
+
+BUILD_SHOW_FUNC_INT_LITE(limit_adjust, limit_adjust)
+BUILD_STORE_FUNC_DEG(limit_adjust, th)
+
+static DEVICE_ATTR(sensor1_temperature, S_IRUGO,
+ show_sensor1_temperature,NULL);
+static DEVICE_ATTR(sensor2_temperature, S_IRUGO,
+ show_sensor2_temperature,NULL);
+static DEVICE_ATTR(sensor1_limit, S_IRUGO,
+ show_sensor1_limit, NULL);
+static DEVICE_ATTR(sensor2_limit, S_IRUGO,
+ show_sensor2_limit, NULL);
+static DEVICE_ATTR(sensor1_location, S_IRUGO,
+ show_sensor1_location, NULL);
+static DEVICE_ATTR(sensor2_location, S_IRUGO,
+ show_sensor2_location, NULL);
+
+static DEVICE_ATTR(specified_fan_speed, S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH,
+ show_specified_fan_speed,store_specified_fan_speed);
+
+static DEVICE_ATTR(sensor1_fan_speed, S_IRUGO,
+ show_sensor1_fan_speed, NULL);
+static DEVICE_ATTR(sensor2_fan_speed, S_IRUGO,
+ show_sensor2_fan_speed, NULL);
+
+static DEVICE_ATTR(limit_adjust, S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH,
+ show_limit_adjust, store_limit_adjust);
+
+static void thermostat_create_files(struct thermostat *th)
+{
+ struct device_node *np = th->clt->dev.of_node;
+ struct device *dev;
+ int err;
+
+ /* To maintain ABI compatibility with userspace, create
+ * the old style platform driver and attach the attributes
+ * to it here
+ */
+ th->pdev = of_platform_device_create(np, "temperatures", NULL);
+ if (!th->pdev)
+ return;
+ dev = &th->pdev->dev;
+ dev_set_drvdata(dev, th);
+ err = device_create_file(dev, &dev_attr_sensor1_temperature);
+ err |= device_create_file(dev, &dev_attr_sensor2_temperature);
+ err |= device_create_file(dev, &dev_attr_sensor1_limit);
+ err |= device_create_file(dev, &dev_attr_sensor2_limit);
+ err |= device_create_file(dev, &dev_attr_sensor1_location);
+ err |= device_create_file(dev, &dev_attr_sensor2_location);
+ err |= device_create_file(dev, &dev_attr_limit_adjust);
+ err |= device_create_file(dev, &dev_attr_specified_fan_speed);
+ err |= device_create_file(dev, &dev_attr_sensor1_fan_speed);
+ if(th->type == ADT7460)
+ err |= device_create_file(dev, &dev_attr_sensor2_fan_speed);
+ if (err)
+ printk(KERN_WARNING
+ "Failed to create temperature attribute file(s).\n");
+}
+
+static void thermostat_remove_files(struct thermostat *th)
+{
+ struct device *dev;
+
+ if (!th->pdev)
+ return;
+ dev = &th->pdev->dev;
+ device_remove_file(dev, &dev_attr_sensor1_temperature);
+ device_remove_file(dev, &dev_attr_sensor2_temperature);
+ device_remove_file(dev, &dev_attr_sensor1_limit);
+ device_remove_file(dev, &dev_attr_sensor2_limit);
+ device_remove_file(dev, &dev_attr_sensor1_location);
+ device_remove_file(dev, &dev_attr_sensor2_location);
+ device_remove_file(dev, &dev_attr_limit_adjust);
+ device_remove_file(dev, &dev_attr_specified_fan_speed);
+ device_remove_file(dev, &dev_attr_sensor1_fan_speed);
+ if (th->type == ADT7460)
+ device_remove_file(dev, &dev_attr_sensor2_fan_speed);
+ of_device_unregister(th->pdev);
+
+}
+
+static int probe_thermostat(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device_node *np = client->dev.of_node;
+ struct thermostat* th;
+ const __be32 *prop;
+ int i, rc, vers, offset = 0;
+
+ if (!np)
+ return -ENXIO;
+ prop = of_get_property(np, "hwsensor-params-version", NULL);
+ if (!prop)
+ return -ENXIO;
+ vers = be32_to_cpup(prop);
+ printk(KERN_INFO "adt746x: version %d (%ssupported)\n",
+ vers, vers == 1 ? "" : "un");
+ if (vers != 1)
+ return -ENXIO;
+
+ if (of_get_property(np, "hwsensor-location", NULL)) {
+ for (i = 0; i < 3; i++) {
+ sensor_location[i] = of_get_property(np,
+ "hwsensor-location", NULL) + offset;
+
+ if (sensor_location[i] == NULL)
+ sensor_location[i] = "";
+
+ printk(KERN_INFO "sensor %d: %s\n", i, sensor_location[i]);
+ offset += strlen(sensor_location[i]) + 1;
+ }
+ }
+
+ th = kzalloc(sizeof(struct thermostat), GFP_KERNEL);
+ if (!th)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, th);
+ th->clt = client;
+ th->type = id->driver_data;
+
+ rc = read_reg(th, CONFIG_REG);
+ if (rc < 0) {
+ dev_err(&client->dev, "Thermostat failed to read config!\n");
+ kfree(th);
+ return -ENODEV;
+ }
+
+ /* force manual control to start the fan quieter */
+ if (fan_speed == -1)
+ fan_speed = 64;
+
+ if (th->type == ADT7460) {
+ printk(KERN_INFO "adt746x: ADT7460 initializing\n");
+ /* The 7460 needs to be started explicitly */
+ write_reg(th, CONFIG_REG, 1);
+ } else
+ printk(KERN_INFO "adt746x: ADT7467 initializing\n");
+
+ for (i = 0; i < 3; i++) {
+ th->initial_limits[i] = read_reg(th, LIMIT_REG[i]);
+ set_limit(th, i);
+ }
+
+ printk(KERN_INFO "adt746x: Lowering max temperatures from %d, %d, %d"
+ " to %d, %d, %d\n",
+ th->initial_limits[0], th->initial_limits[1],
+ th->initial_limits[2], th->limits[0], th->limits[1],
+ th->limits[2]);
+
+ /* record invert bit status because fw can corrupt it after suspend */
+ th->pwm_inv[0] = read_reg(th, MANUAL_MODE[0]) & INVERT_MASK;
+ th->pwm_inv[1] = read_reg(th, MANUAL_MODE[1]) & INVERT_MASK;
+
+ /* be sure to really write fan speed the first time */
+ th->last_speed[0] = -2;
+ th->last_speed[1] = -2;
+ th->last_var[0] = -80;
+ th->last_var[1] = -80;
+
+ if (fan_speed != -1) {
+ /* manual mode, stop fans */
+ write_both_fan_speed(th, 0);
+ } else {
+ /* automatic mode */
+ write_both_fan_speed(th, -1);
+ }
+
+ th->thread = kthread_run(monitor_task, th, "kfand");
+ if (th->thread == ERR_PTR(-ENOMEM)) {
+ printk(KERN_INFO "adt746x: Kthread creation failed\n");
+ th->thread = NULL;
+ return -ENOMEM;
+ }
+
+ thermostat_create_files(th);
+
+ return 0;
+}
+
+static int remove_thermostat(struct i2c_client *client)
+{
+ struct thermostat *th = i2c_get_clientdata(client);
+ int i;
+
+ thermostat_remove_files(th);
+
+ if (th->thread != NULL)
+ kthread_stop(th->thread);
+
+ printk(KERN_INFO "adt746x: Putting max temperatures back from "
+ "%d, %d, %d to %d, %d, %d\n",
+ th->limits[0], th->limits[1], th->limits[2],
+ th->initial_limits[0], th->initial_limits[1],
+ th->initial_limits[2]);
+
+ for (i = 0; i < 3; i++)
+ write_reg(th, LIMIT_REG[i], th->initial_limits[i]);
+
+ write_both_fan_speed(th, -1);
+
+ kfree(th);
+
+ return 0;
+}
+
+static const struct i2c_device_id therm_adt746x_id[] = {
+ { "MAC,adt7460", ADT7460 },
+ { "MAC,adt7467", ADT7467 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, therm_adt746x_id);
+
+static struct i2c_driver thermostat_driver = {
+ .driver = {
+ .name = "therm_adt746x",
+ },
+ .probe = probe_thermostat,
+ .remove = remove_thermostat,
+ .id_table = therm_adt746x_id,
+};
+
+static int __init thermostat_init(void)
+{
+#ifndef CONFIG_I2C_POWERMAC
+ request_module("i2c-powermac");
+#endif
+
+ return i2c_add_driver(&thermostat_driver);
+}
+
+static void __exit thermostat_exit(void)
+{
+ i2c_del_driver(&thermostat_driver);
+}
+
+module_init(thermostat_init);
+module_exit(thermostat_exit);
Code Review / kvmfornfv.git / blobdiff