Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / drivers / leds / leds-ipaq-micro.c

diff --git a/kernel/drivers/leds/leds-ipaq-micro.c b/kernel/drivers/leds/leds-ipaq-micro.c
new file mode 100644 (file)
index 0000000..3776f51
--- /dev/null
+++ b/kernel/drivers/leds/leds-ipaq-micro.c
@@ -0,0 +1,141 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * h3xxx atmel micro companion support, notification LED subdevice
+ *
+ * Author : Linus Walleij <linus.walleij@linaro.org>
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/ipaq-micro.h>
+#include <linux/leds.h>
+
+#define LED_YELLOW     0x00
+#define LED_GREEN      0x01
+
+#define LED_EN          (1 << 4)        /* LED ON/OFF 0:off, 1:on                       */
+#define LED_AUTOSTOP    (1 << 5)        /* LED ON/OFF auto stop set 0:disable, 1:enable */
+#define LED_ALWAYS      (1 << 6)        /* LED Interrupt Mask 0:No mask, 1:mask         */
+
+static void micro_leds_brightness_set(struct led_classdev *led_cdev,
+                                     enum led_brightness value)
+{
+       struct ipaq_micro *micro = dev_get_drvdata(led_cdev->dev->parent->parent);
+       /*
+        * In this message:
+        * Byte 0 = LED color: 0 = yellow, 1 = green
+        *          yellow LED is always ~30 blinks per minute
+        * Byte 1 = duration (flags?) appears to be ignored
+        * Byte 2 = green ontime in 1/10 sec (deciseconds)
+        *          1 = 1/10 second
+        *          0 = 256/10 second
+        * Byte 3 = green offtime in 1/10 sec (deciseconds)
+        *          1 = 1/10 second
+        *          0 = 256/10 seconds
+        */
+       struct ipaq_micro_msg msg = {
+               .id = MSG_NOTIFY_LED,
+               .tx_len = 4,
+       };
+
+       msg.tx_data[0] = LED_GREEN;
+       msg.tx_data[1] = 0;
+       if (value) {
+               msg.tx_data[2] = 0; /* Duty cycle 256 */
+               msg.tx_data[3] = 1;
+       } else {
+               msg.tx_data[2] = 1;
+               msg.tx_data[3] = 0; /* Duty cycle 256 */
+       }
+       ipaq_micro_tx_msg_sync(micro, &msg);
+}
+
+/* Maximum duty cycle in ms 256/10 sec = 25600 ms */
+#define IPAQ_LED_MAX_DUTY 25600
+
+static int micro_leds_blink_set(struct led_classdev *led_cdev,
+                               unsigned long *delay_on,
+                               unsigned long *delay_off)
+{
+       struct ipaq_micro *micro = dev_get_drvdata(led_cdev->dev->parent->parent);
+       /*
+        * In this message:
+        * Byte 0 = LED color: 0 = yellow, 1 = green
+        *          yellow LED is always ~30 blinks per minute
+        * Byte 1 = duration (flags?) appears to be ignored
+        * Byte 2 = green ontime in 1/10 sec (deciseconds)
+        *          1 = 1/10 second
+        *          0 = 256/10 second
+        * Byte 3 = green offtime in 1/10 sec (deciseconds)
+        *          1 = 1/10 second
+        *          0 = 256/10 seconds
+        */
+       struct ipaq_micro_msg msg = {
+               .id = MSG_NOTIFY_LED,
+               .tx_len = 4,
+       };
+
+       msg.tx_data[0] = LED_GREEN;
+        if (*delay_on > IPAQ_LED_MAX_DUTY ||
+           *delay_off > IPAQ_LED_MAX_DUTY)
+                return -EINVAL;
+
+        if (*delay_on == 0 && *delay_off == 0) {
+                *delay_on = 100;
+                *delay_off = 100;
+        }
+
+       msg.tx_data[1] = 0;
+       if (*delay_on >= IPAQ_LED_MAX_DUTY)
+               msg.tx_data[2] = 0;
+       else
+               msg.tx_data[2] = (u8) DIV_ROUND_CLOSEST(*delay_on, 100);
+       if (*delay_off >= IPAQ_LED_MAX_DUTY)
+               msg.tx_data[3] = 0;
+       else
+               msg.tx_data[3] = (u8) DIV_ROUND_CLOSEST(*delay_off, 100);
+       return ipaq_micro_tx_msg_sync(micro, &msg);
+}
+
+static struct led_classdev micro_led = {
+       .name                   = "led-ipaq-micro",
+       .brightness_set         = micro_leds_brightness_set,
+       .blink_set              = micro_leds_blink_set,
+       .flags                  = LED_CORE_SUSPENDRESUME,
+};
+
+static int micro_leds_probe(struct platform_device *pdev)
+{
+       int ret;
+
+       ret = led_classdev_register(&pdev->dev, &micro_led);
+       if (ret) {
+               dev_err(&pdev->dev, "registering led failed: %d\n", ret);
+               return ret;
+       }
+       dev_info(&pdev->dev, "iPAQ micro notification LED driver\n");
+
+       return 0;
+}
+
+static int micro_leds_remove(struct platform_device *pdev)
+{
+       led_classdev_unregister(&micro_led);
+       return 0;
+}
+
+static struct platform_driver micro_leds_device_driver = {
+       .driver = {
+               .name    = "ipaq-micro-leds",
+       },
+       .probe   = micro_leds_probe,
+       .remove  = micro_leds_remove,
+};
+module_platform_driver(micro_leds_device_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("driver for iPAQ Atmel micro leds");
+MODULE_ALIAS("platform:ipaq-micro-leds");