Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / isdn / capi / capidrv.h
diff --git a/kernel/drivers/isdn/capi/capidrv.h b/kernel/drivers/isdn/capi/capidrv.h
new file mode 100644 (file)
index 0000000..4466b2e
--- /dev/null
@@ -0,0 +1,140 @@
+/* $Id: capidrv.h,v 1.2.8.2 2001/09/23 22:24:33 kai Exp $
+ *
+ * ISDN4Linux Driver, using capi20 interface (kernelcapi)
+ *
+ * Copyright 1997 by Carsten Paeth <calle@calle.de>
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#ifndef __CAPIDRV_H__
+#define __CAPIDRV_H__
+
+/*
+ * LISTEN state machine
+ */
+#define ST_LISTEN_NONE                 0       /* L-0 */
+#define ST_LISTEN_WAIT_CONF            1       /* L-0.1 */
+#define ST_LISTEN_ACTIVE               2       /* L-1 */
+#define ST_LISTEN_ACTIVE_WAIT_CONF     3       /* L-1.1 */
+
+
+#define EV_LISTEN_REQ                  1       /* L-0 -> L-0.1
+                                                  L-1 -> L-1.1 */
+#define EV_LISTEN_CONF_ERROR           2       /* L-0.1 -> L-0
+                                                  L-1.1 -> L-1 */
+#define EV_LISTEN_CONF_EMPTY           3       /* L-0.1 -> L-0
+                                                  L-1.1 -> L-0 */
+#define EV_LISTEN_CONF_OK              4       /* L-0.1 -> L-1
+                                                  L-1.1 -> L.1 */
+
+/*
+ * per plci state machine
+ */
+#define ST_PLCI_NONE                   0       /* P-0 */
+#define ST_PLCI_OUTGOING               1       /* P-0.1 */
+#define ST_PLCI_ALLOCATED              2       /* P-1 */
+#define ST_PLCI_ACTIVE                 3       /* P-ACT */
+#define ST_PLCI_INCOMING               4       /* P-2 */
+#define ST_PLCI_FACILITY_IND           5       /* P-3 */
+#define ST_PLCI_ACCEPTING              6       /* P-4 */
+#define ST_PLCI_DISCONNECTING          7       /* P-5 */
+#define ST_PLCI_DISCONNECTED           8       /* P-6 */
+#define ST_PLCI_RESUMEING              9       /* P-0.Res */
+#define ST_PLCI_RESUME                 10      /* P-Res */
+#define ST_PLCI_HELD                   11      /* P-HELD */
+
+#define EV_PLCI_CONNECT_REQ            1       /* P-0 -> P-0.1
+                                                */
+#define EV_PLCI_CONNECT_CONF_ERROR     2       /* P-0.1 -> P-0
+                                                */
+#define EV_PLCI_CONNECT_CONF_OK                3       /* P-0.1 -> P-1
+                                                */
+#define EV_PLCI_FACILITY_IND_UP                4       /* P-0 -> P-1
+                                                */
+#define EV_PLCI_CONNECT_IND            5       /* P-0 -> P-2
+                                                */
+#define EV_PLCI_CONNECT_ACTIVE_IND     6       /* P-1 -> P-ACT
+                                                */
+#define EV_PLCI_CONNECT_REJECT         7       /* P-2 -> P-5
+                                                  P-3 -> P-5
+                                               */
+#define EV_PLCI_DISCONNECT_REQ         8       /* P-1 -> P-5
+                                                  P-2 -> P-5
+                                                  P-3 -> P-5
+                                                  P-4 -> P-5
+                                                  P-ACT -> P-5
+                                                  P-Res -> P-5 (*)
+                                                  P-HELD -> P-5 (*)
+                                               */
+#define EV_PLCI_DISCONNECT_IND         9       /* P-1 -> P-6
+                                                  P-2 -> P-6
+                                                  P-3 -> P-6
+                                                  P-4 -> P-6
+                                                  P-5 -> P-6
+                                                  P-ACT -> P-6
+                                                  P-Res -> P-6 (*)
+                                                  P-HELD -> P-6 (*)
+                                               */
+#define EV_PLCI_FACILITY_IND_DOWN      10      /* P-0.1 -> P-5
+                                                  P-1 -> P-5
+                                                  P-ACT -> P-5
+                                                  P-2 -> P-5
+                                                  P-3 -> P-5
+                                                  P-4 -> P-5
+                                               */
+#define EV_PLCI_DISCONNECT_RESP                11      /* P-6 -> P-0
+                                                */
+#define EV_PLCI_CONNECT_RESP           12      /* P-6 -> P-0
+                                                */
+
+#define EV_PLCI_RESUME_REQ             13      /* P-0 -> P-0.Res
+                                                */
+#define EV_PLCI_RESUME_CONF_OK         14      /* P-0.Res -> P-Res
+                                                */
+#define EV_PLCI_RESUME_CONF_ERROR      15      /* P-0.Res -> P-0
+                                                */
+#define EV_PLCI_RESUME_IND             16      /* P-Res -> P-ACT
+                                                */
+#define EV_PLCI_HOLD_IND               17      /* P-ACT -> P-HELD
+                                                */
+#define EV_PLCI_RETRIEVE_IND           18      /* P-HELD -> P-ACT
+                                                */
+#define EV_PLCI_SUSPEND_IND            19      /* P-ACT -> P-5
+                                                */
+#define EV_PLCI_CD_IND                 20      /* P-2 -> P-5
+                                                */
+
+/*
+ * per ncci state machine
+ */
+#define ST_NCCI_PREVIOUS                       -1
+#define ST_NCCI_NONE                           0       /* N-0 */
+#define ST_NCCI_OUTGOING                       1       /* N-0.1 */
+#define ST_NCCI_INCOMING                       2       /* N-1 */
+#define ST_NCCI_ALLOCATED                      3       /* N-2 */
+#define ST_NCCI_ACTIVE                         4       /* N-ACT */
+#define ST_NCCI_RESETING                       5       /* N-3 */
+#define ST_NCCI_DISCONNECTING                  6       /* N-4 */
+#define ST_NCCI_DISCONNECTED                   7       /* N-5 */
+
+#define EV_NCCI_CONNECT_B3_REQ                 1       /* N-0 -> N-0.1 */
+#define EV_NCCI_CONNECT_B3_IND                 2       /* N-0 -> N.1 */
+#define EV_NCCI_CONNECT_B3_CONF_OK             3       /* N-0.1 -> N.2 */
+#define EV_NCCI_CONNECT_B3_CONF_ERROR          4       /* N-0.1 -> N.0 */
+#define EV_NCCI_CONNECT_B3_REJECT              5       /* N-1 -> N-4 */
+#define EV_NCCI_CONNECT_B3_RESP                        6       /* N-1 -> N-2 */
+#define EV_NCCI_CONNECT_B3_ACTIVE_IND          7       /* N-2 -> N-ACT */
+#define EV_NCCI_RESET_B3_REQ                   8       /* N-ACT -> N-3 */
+#define EV_NCCI_RESET_B3_IND                   9       /* N-3 -> N-ACT */
+#define EV_NCCI_DISCONNECT_B3_IND              10      /* N-4 -> N.5 */
+#define EV_NCCI_DISCONNECT_B3_CONF_ERROR       11      /* N-4 -> previous */
+#define EV_NCCI_DISCONNECT_B3_REQ              12      /* N-1 -> N-4
+                                                          N-2 -> N-4
+                                                          N-3 -> N-4
+                                                          N-ACT -> N-4 */
+#define EV_NCCI_DISCONNECT_B3_RESP             13      /* N-5 -> N-0 */
+
+#endif                         /* __CAPIDRV_H__ */