--- /dev/null
+/******************************************************************************
+ * usbtouchscreen.c
+ * Driver for USB Touchscreens, supporting those devices:
+ * - eGalax Touchkit
+ * includes eTurboTouch CT-410/510/700
+ * - 3M/Microtouch EX II series
+ * - ITM
+ * - PanJit TouchSet
+ * - eTurboTouch
+ * - Gunze AHL61
+ * - DMC TSC-10/25
+ * - IRTOUCHSYSTEMS/UNITOP
+ * - IdealTEK URTC1000
+ * - General Touch
+ * - GoTop Super_Q2/GogoPen/PenPower tablets
+ * - JASTEC USB touch controller/DigiTech DTR-02U
+ * - Zytronic capacitive touchscreen
+ * - NEXIO/iNexio
+ * - Elo TouchSystems 2700 IntelliTouch
+ * - EasyTouch USB Dual/Multi touch controller from Data Modul
+ *
+ * Copyright (C) 2004-2007 by Daniel Ritz <daniel.ritz@gmx.ch>
+ * Copyright (C) by Todd E. Johnson (mtouchusb.c)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Driver is based on touchkitusb.c
+ * - ITM parts are from itmtouch.c
+ * - 3M parts are from mtouchusb.c
+ * - PanJit parts are from an unmerged driver by Lanslott Gish
+ * - DMC TSC 10/25 are from Holger Schurig, with ideas from an unmerged
+ * driver from Marius Vollmer
+ *
+ *****************************************************************************/
+
+//#define DEBUG
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/input.h>
+#include <linux/hid.h>
+
+
+#define DRIVER_VERSION "v0.6"
+#define DRIVER_AUTHOR "Daniel Ritz <daniel.ritz@gmx.ch>"
+#define DRIVER_DESC "USB Touchscreen Driver"
+
+static bool swap_xy;
+module_param(swap_xy, bool, 0644);
+MODULE_PARM_DESC(swap_xy, "If set X and Y axes are swapped.");
+
+static bool hwcalib_xy;
+module_param(hwcalib_xy, bool, 0644);
+MODULE_PARM_DESC(hwcalib_xy, "If set hw-calibrated X/Y are used if available");
+
+/* device specifc data/functions */
+struct usbtouch_usb;
+struct usbtouch_device_info {
+ int min_xc, max_xc;
+ int min_yc, max_yc;
+ int min_press, max_press;
+ int rept_size;
+
+ /*
+ * Always service the USB devices irq not just when the input device is
+ * open. This is useful when devices have a watchdog which prevents us
+ * from periodically polling the device. Leave this unset unless your
+ * touchscreen device requires it, as it does consume more of the USB
+ * bandwidth.
+ */
+ bool irq_always;
+
+ void (*process_pkt) (struct usbtouch_usb *usbtouch, unsigned char *pkt, int len);
+
+ /*
+ * used to get the packet len. possible return values:
+ * > 0: packet len
+ * = 0: skip one byte
+ * < 0: -return value more bytes needed
+ */
+ int (*get_pkt_len) (unsigned char *pkt, int len);
+
+ int (*read_data) (struct usbtouch_usb *usbtouch, unsigned char *pkt);
+ int (*alloc) (struct usbtouch_usb *usbtouch);
+ int (*init) (struct usbtouch_usb *usbtouch);
+ void (*exit) (struct usbtouch_usb *usbtouch);
+};
+
+/* a usbtouch device */
+struct usbtouch_usb {
+ unsigned char *data;
+ dma_addr_t data_dma;
+ int data_size;
+ unsigned char *buffer;
+ int buf_len;
+ struct urb *irq;
+ struct usb_interface *interface;
+ struct input_dev *input;
+ struct usbtouch_device_info *type;
+ char name[128];
+ char phys[64];
+ void *priv;
+
+ int x, y;
+ int touch, press;
+};
+
+
+/* device types */
+enum {
+ DEVTYPE_IGNORE = -1,
+ DEVTYPE_EGALAX,
+ DEVTYPE_PANJIT,
+ DEVTYPE_3M,
+ DEVTYPE_ITM,
+ DEVTYPE_ETURBO,
+ DEVTYPE_GUNZE,
+ DEVTYPE_DMC_TSC10,
+ DEVTYPE_IRTOUCH,
+ DEVTYPE_IRTOUCH_HIRES,
+ DEVTYPE_IDEALTEK,
+ DEVTYPE_GENERAL_TOUCH,
+ DEVTYPE_GOTOP,
+ DEVTYPE_JASTEC,
+ DEVTYPE_E2I,
+ DEVTYPE_ZYTRONIC,
+ DEVTYPE_TC45USB,
+ DEVTYPE_NEXIO,
+ DEVTYPE_ELO,
+ DEVTYPE_ETOUCH,
+};
+
+#define USB_DEVICE_HID_CLASS(vend, prod) \
+ .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS \
+ | USB_DEVICE_ID_MATCH_DEVICE, \
+ .idVendor = (vend), \
+ .idProduct = (prod), \
+ .bInterfaceClass = USB_INTERFACE_CLASS_HID
+
+static const struct usb_device_id usbtouch_devices[] = {
+#ifdef CONFIG_TOUCHSCREEN_USB_EGALAX
+ /* ignore the HID capable devices, handled by usbhid */
+ {USB_DEVICE_HID_CLASS(0x0eef, 0x0001), .driver_info = DEVTYPE_IGNORE},
+ {USB_DEVICE_HID_CLASS(0x0eef, 0x0002), .driver_info = DEVTYPE_IGNORE},
+
+ /* normal device IDs */
+ {USB_DEVICE(0x3823, 0x0001), .driver_info = DEVTYPE_EGALAX},
+ {USB_DEVICE(0x3823, 0x0002), .driver_info = DEVTYPE_EGALAX},
+ {USB_DEVICE(0x0123, 0x0001), .driver_info = DEVTYPE_EGALAX},
+ {USB_DEVICE(0x0eef, 0x0001), .driver_info = DEVTYPE_EGALAX},
+ {USB_DEVICE(0x0eef, 0x0002), .driver_info = DEVTYPE_EGALAX},
+ {USB_DEVICE(0x1234, 0x0001), .driver_info = DEVTYPE_EGALAX},
+ {USB_DEVICE(0x1234, 0x0002), .driver_info = DEVTYPE_EGALAX},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_PANJIT
+ {USB_DEVICE(0x134c, 0x0001), .driver_info = DEVTYPE_PANJIT},
+ {USB_DEVICE(0x134c, 0x0002), .driver_info = DEVTYPE_PANJIT},
+ {USB_DEVICE(0x134c, 0x0003), .driver_info = DEVTYPE_PANJIT},
+ {USB_DEVICE(0x134c, 0x0004), .driver_info = DEVTYPE_PANJIT},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_3M
+ {USB_DEVICE(0x0596, 0x0001), .driver_info = DEVTYPE_3M},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_ITM
+ {USB_DEVICE(0x0403, 0xf9e9), .driver_info = DEVTYPE_ITM},
+ {USB_DEVICE(0x16e3, 0xf9e9), .driver_info = DEVTYPE_ITM},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_ETURBO
+ {USB_DEVICE(0x1234, 0x5678), .driver_info = DEVTYPE_ETURBO},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_GUNZE
+ {USB_DEVICE(0x0637, 0x0001), .driver_info = DEVTYPE_GUNZE},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_DMC_TSC10
+ {USB_DEVICE(0x0afa, 0x03e8), .driver_info = DEVTYPE_DMC_TSC10},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_IRTOUCH
+ {USB_DEVICE(0x595a, 0x0001), .driver_info = DEVTYPE_IRTOUCH},
+ {USB_DEVICE(0x6615, 0x0001), .driver_info = DEVTYPE_IRTOUCH},
+ {USB_DEVICE(0x6615, 0x0012), .driver_info = DEVTYPE_IRTOUCH_HIRES},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_IDEALTEK
+ {USB_DEVICE(0x1391, 0x1000), .driver_info = DEVTYPE_IDEALTEK},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH
+ {USB_DEVICE(0x0dfc, 0x0001), .driver_info = DEVTYPE_GENERAL_TOUCH},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_GOTOP
+ {USB_DEVICE(0x08f2, 0x007f), .driver_info = DEVTYPE_GOTOP},
+ {USB_DEVICE(0x08f2, 0x00ce), .driver_info = DEVTYPE_GOTOP},
+ {USB_DEVICE(0x08f2, 0x00f4), .driver_info = DEVTYPE_GOTOP},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_JASTEC
+ {USB_DEVICE(0x0f92, 0x0001), .driver_info = DEVTYPE_JASTEC},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_E2I
+ {USB_DEVICE(0x1ac7, 0x0001), .driver_info = DEVTYPE_E2I},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_ZYTRONIC
+ {USB_DEVICE(0x14c8, 0x0003), .driver_info = DEVTYPE_ZYTRONIC},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC45USB
+ /* TC5UH */
+ {USB_DEVICE(0x0664, 0x0309), .driver_info = DEVTYPE_TC45USB},
+ /* TC4UM */
+ {USB_DEVICE(0x0664, 0x0306), .driver_info = DEVTYPE_TC45USB},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_NEXIO
+ /* data interface only */
+ {USB_DEVICE_AND_INTERFACE_INFO(0x10f0, 0x2002, 0x0a, 0x00, 0x00),
+ .driver_info = DEVTYPE_NEXIO},
+ {USB_DEVICE_AND_INTERFACE_INFO(0x1870, 0x0001, 0x0a, 0x00, 0x00),
+ .driver_info = DEVTYPE_NEXIO},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_ELO
+ {USB_DEVICE(0x04e7, 0x0020), .driver_info = DEVTYPE_ELO},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_EASYTOUCH
+ {USB_DEVICE(0x7374, 0x0001), .driver_info = DEVTYPE_ETOUCH},
+#endif
+
+ {}
+};
+
+
+/*****************************************************************************
+ * e2i Part
+ */
+
+#ifdef CONFIG_TOUCHSCREEN_USB_E2I
+static int e2i_init(struct usbtouch_usb *usbtouch)
+{
+ int ret;
+ struct usb_device *udev = interface_to_usbdev(usbtouch->interface);
+
+ ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+ 0x01, 0x02, 0x0000, 0x0081,
+ NULL, 0, USB_CTRL_SET_TIMEOUT);
+
+ dev_dbg(&usbtouch->interface->dev,
+ "%s - usb_control_msg - E2I_RESET - bytes|err: %d\n",
+ __func__, ret);
+ return ret;
+}
+
+static int e2i_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+ int tmp = (pkt[0] << 8) | pkt[1];
+ dev->x = (pkt[2] << 8) | pkt[3];
+ dev->y = (pkt[4] << 8) | pkt[5];
+
+ tmp = tmp - 0xA000;
+ dev->touch = (tmp > 0);
+ dev->press = (tmp > 0 ? tmp : 0);
+
+ return 1;
+}
+#endif
+
+
+/*****************************************************************************
+ * eGalax part
+ */
+
+#ifdef CONFIG_TOUCHSCREEN_USB_EGALAX
+
+#ifndef MULTI_PACKET
+#define MULTI_PACKET
+#endif
+
+#define EGALAX_PKT_TYPE_MASK 0xFE
+#define EGALAX_PKT_TYPE_REPT 0x80
+#define EGALAX_PKT_TYPE_DIAG 0x0A
+
+static int egalax_init(struct usbtouch_usb *usbtouch)
+{
+ int ret, i;
+ unsigned char *buf;
+ struct usb_device *udev = interface_to_usbdev(usbtouch->interface);
+
+ /*
+ * An eGalax diagnostic packet kicks the device into using the right
+ * protocol. We send a "check active" packet. The response will be
+ * read later and ignored.
+ */
+
+ buf = kmalloc(3, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ buf[0] = EGALAX_PKT_TYPE_DIAG;
+ buf[1] = 1; /* length */
+ buf[2] = 'A'; /* command - check active */
+
+ for (i = 0; i < 3; i++) {
+ ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+ 0,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0, 0, buf, 3,
+ USB_CTRL_SET_TIMEOUT);
+ if (ret >= 0) {
+ ret = 0;
+ break;
+ }
+ if (ret != -EPIPE)
+ break;
+ }
+
+ kfree(buf);
+
+ return ret;
+}
+
+static int egalax_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+ if ((pkt[0] & EGALAX_PKT_TYPE_MASK) != EGALAX_PKT_TYPE_REPT)
+ return 0;
+
+ dev->x = ((pkt[3] & 0x0F) << 7) | (pkt[4] & 0x7F);
+ dev->y = ((pkt[1] & 0x0F) << 7) | (pkt[2] & 0x7F);
+ dev->touch = pkt[0] & 0x01;
+
+ return 1;
+}
+
+static int egalax_get_pkt_len(unsigned char *buf, int len)
+{
+ switch (buf[0] & EGALAX_PKT_TYPE_MASK) {
+ case EGALAX_PKT_TYPE_REPT:
+ return 5;
+
+ case EGALAX_PKT_TYPE_DIAG:
+ if (len < 2)
+ return -1;
+
+ return buf[1] + 2;
+ }
+
+ return 0;
+}
+#endif
+
+/*****************************************************************************
+ * EasyTouch part
+ */
+
+#ifdef CONFIG_TOUCHSCREEN_USB_EASYTOUCH
+
+#ifndef MULTI_PACKET
+#define MULTI_PACKET
+#endif
+
+#define ETOUCH_PKT_TYPE_MASK 0xFE
+#define ETOUCH_PKT_TYPE_REPT 0x80
+#define ETOUCH_PKT_TYPE_REPT2 0xB0
+#define ETOUCH_PKT_TYPE_DIAG 0x0A
+
+static int etouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+ if ((pkt[0] & ETOUCH_PKT_TYPE_MASK) != ETOUCH_PKT_TYPE_REPT &&
+ (pkt[0] & ETOUCH_PKT_TYPE_MASK) != ETOUCH_PKT_TYPE_REPT2)
+ return 0;
+
+ dev->x = ((pkt[1] & 0x1F) << 7) | (pkt[2] & 0x7F);
+ dev->y = ((pkt[3] & 0x1F) << 7) | (pkt[4] & 0x7F);
+ dev->touch = pkt[0] & 0x01;
+
+ return 1;
+}
+
+static int etouch_get_pkt_len(unsigned char *buf, int len)
+{
+ switch (buf[0] & ETOUCH_PKT_TYPE_MASK) {
+ case ETOUCH_PKT_TYPE_REPT:
+ case ETOUCH_PKT_TYPE_REPT2:
+ return 5;
+
+ case ETOUCH_PKT_TYPE_DIAG:
+ if (len < 2)
+ return -1;
+
+ return buf[1] + 2;
+ }
+
+ return 0;
+}
+#endif
+
+/*****************************************************************************
+ * PanJit Part
+ */
+#ifdef CONFIG_TOUCHSCREEN_USB_PANJIT
+static int panjit_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+ dev->x = ((pkt[2] & 0x0F) << 8) | pkt[1];
+ dev->y = ((pkt[4] & 0x0F) << 8) | pkt[3];
+ dev->touch = pkt[0] & 0x01;
+
+ return 1;
+}
+#endif
+
+
+/*****************************************************************************
+ * 3M/Microtouch Part
+ */
+#ifdef CONFIG_TOUCHSCREEN_USB_3M
+
+#define MTOUCHUSB_ASYNC_REPORT 1
+#define MTOUCHUSB_RESET 7
+#define MTOUCHUSB_REQ_CTRLLR_ID 10
+
+static int mtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+ if (hwcalib_xy) {
+ dev->x = (pkt[4] << 8) | pkt[3];
+ dev->y = 0xffff - ((pkt[6] << 8) | pkt[5]);
+ } else {
+ dev->x = (pkt[8] << 8) | pkt[7];
+ dev->y = (pkt[10] << 8) | pkt[9];
+ }
+ dev->touch = (pkt[2] & 0x40) ? 1 : 0;
+
+ return 1;
+}
+
+static int mtouch_init(struct usbtouch_usb *usbtouch)
+{
+ int ret, i;
+ struct usb_device *udev = interface_to_usbdev(usbtouch->interface);
+
+ ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+ MTOUCHUSB_RESET,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 1, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
+ dev_dbg(&usbtouch->interface->dev,
+ "%s - usb_control_msg - MTOUCHUSB_RESET - bytes|err: %d\n",
+ __func__, ret);
+ if (ret < 0)
+ return ret;
+ msleep(150);
+
+ for (i = 0; i < 3; i++) {
+ ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+ MTOUCHUSB_ASYNC_REPORT,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 1, 1, NULL, 0, USB_CTRL_SET_TIMEOUT);
+ dev_dbg(&usbtouch->interface->dev,
+ "%s - usb_control_msg - MTOUCHUSB_ASYNC_REPORT - bytes|err: %d\n",
+ __func__, ret);
+ if (ret >= 0)
+ break;
+ if (ret != -EPIPE)
+ return ret;
+ }
+
+ /* Default min/max xy are the raw values, override if using hw-calib */
+ if (hwcalib_xy) {
+ input_set_abs_params(usbtouch->input, ABS_X, 0, 0xffff, 0, 0);
+ input_set_abs_params(usbtouch->input, ABS_Y, 0, 0xffff, 0, 0);
+ }
+
+ return 0;
+}
+#endif
+
+
+/*****************************************************************************
+ * ITM Part
+ */
+#ifdef CONFIG_TOUCHSCREEN_USB_ITM
+static int itm_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+ int touch;
+ /*
+ * ITM devices report invalid x/y data if not touched.
+ * if the screen was touched before but is not touched any more
+ * report touch as 0 with the last valid x/y data once. then stop
+ * reporting data until touched again.
+ */
+ dev->press = ((pkt[2] & 0x01) << 7) | (pkt[5] & 0x7F);
+
+ touch = ~pkt[7] & 0x20;
+ if (!touch) {
+ if (dev->touch) {
+ dev->touch = 0;
+ return 1;
+ }
+
+ return 0;
+ }
+
+ dev->x = ((pkt[0] & 0x1F) << 7) | (pkt[3] & 0x7F);
+ dev->y = ((pkt[1] & 0x1F) << 7) | (pkt[4] & 0x7F);
+ dev->touch = touch;
+
+ return 1;
+}
+#endif
+
+
+/*****************************************************************************
+ * eTurboTouch part
+ */
+#ifdef CONFIG_TOUCHSCREEN_USB_ETURBO
+#ifndef MULTI_PACKET
+#define MULTI_PACKET
+#endif
+static int eturbo_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+ unsigned int shift;
+
+ /* packets should start with sync */
+ if (!(pkt[0] & 0x80))
+ return 0;
+
+ shift = (6 - (pkt[0] & 0x03));
+ dev->x = ((pkt[3] << 7) | pkt[4]) >> shift;
+ dev->y = ((pkt[1] << 7) | pkt[2]) >> shift;
+ dev->touch = (pkt[0] & 0x10) ? 1 : 0;
+
+ return 1;
+}
+
+static int eturbo_get_pkt_len(unsigned char *buf, int len)
+{
+ if (buf[0] & 0x80)
+ return 5;
+ if (buf[0] == 0x01)
+ return 3;
+ return 0;
+}
+#endif
+
+
+/*****************************************************************************
+ * Gunze part
+ */
+#ifdef CONFIG_TOUCHSCREEN_USB_GUNZE
+static int gunze_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+ if (!(pkt[0] & 0x80) || ((pkt[1] | pkt[2] | pkt[3]) & 0x80))
+ return 0;
+
+ dev->x = ((pkt[0] & 0x1F) << 7) | (pkt[2] & 0x7F);
+ dev->y = ((pkt[1] & 0x1F) << 7) | (pkt[3] & 0x7F);
+ dev->touch = pkt[0] & 0x20;
+
+ return 1;
+}
+#endif
+
+/*****************************************************************************
+ * DMC TSC-10/25 Part
+ *
+ * Documentation about the controller and it's protocol can be found at
+ * http://www.dmccoltd.com/files/controler/tsc10usb_pi_e.pdf
+ * http://www.dmccoltd.com/files/controler/tsc25_usb_e.pdf
+ */
+#ifdef CONFIG_TOUCHSCREEN_USB_DMC_TSC10
+
+/* supported data rates. currently using 130 */
+#define TSC10_RATE_POINT 0x50
+#define TSC10_RATE_30 0x40
+#define TSC10_RATE_50 0x41
+#define TSC10_RATE_80 0x42
+#define TSC10_RATE_100 0x43
+#define TSC10_RATE_130 0x44
+#define TSC10_RATE_150 0x45
+
+/* commands */
+#define TSC10_CMD_RESET 0x55
+#define TSC10_CMD_RATE 0x05
+#define TSC10_CMD_DATA1 0x01
+
+static int dmc_tsc10_init(struct usbtouch_usb *usbtouch)
+{
+ struct usb_device *dev = interface_to_usbdev(usbtouch->interface);
+ int ret = -ENOMEM;
+ unsigned char *buf;
+
+ buf = kmalloc(2, GFP_NOIO);
+ if (!buf)
+ goto err_nobuf;
+ /* reset */
+ buf[0] = buf[1] = 0xFF;
+ ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),
+ TSC10_CMD_RESET,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0, 0, buf, 2, USB_CTRL_SET_TIMEOUT);
+ if (ret < 0)
+ goto err_out;
+ if (buf[0] != 0x06) {
+ ret = -ENODEV;
+ goto err_out;
+ }
+
+ /* set coordinate output rate */
+ buf[0] = buf[1] = 0xFF;
+ ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),
+ TSC10_CMD_RATE,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ TSC10_RATE_150, 0, buf, 2, USB_CTRL_SET_TIMEOUT);
+ if (ret < 0)
+ goto err_out;
+ if ((buf[0] != 0x06) && (buf[0] != 0x15 || buf[1] != 0x01)) {
+ ret = -ENODEV;
+ goto err_out;
+ }
+
+ /* start sending data */
+ ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),
+ TSC10_CMD_DATA1,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
+err_out:
+ kfree(buf);
+err_nobuf:
+ return ret;
+}
+
+
+static int dmc_tsc10_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+ dev->x = ((pkt[2] & 0x03) << 8) | pkt[1];
+ dev->y = ((pkt[4] & 0x03) << 8) | pkt[3];
+ dev->touch = pkt[0] & 0x01;
+
+ return 1;
+}
+#endif
+
+
+/*****************************************************************************
+ * IRTOUCH Part
+ */
+#ifdef CONFIG_TOUCHSCREEN_USB_IRTOUCH
+static int irtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+ dev->x = (pkt[3] << 8) | pkt[2];
+ dev->y = (pkt[5] << 8) | pkt[4];
+ dev->touch = (pkt[1] & 0x03) ? 1 : 0;
+
+ return 1;
+}
+#endif
+
+/*****************************************************************************
+ * ET&T TC5UH/TC4UM part
+ */
+#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC45USB
+static int tc45usb_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+ dev->x = ((pkt[2] & 0x0F) << 8) | pkt[1];
+ dev->y = ((pkt[4] & 0x0F) << 8) | pkt[3];
+ dev->touch = pkt[0] & 0x01;
+
+ return 1;
+}
+#endif
+
+/*****************************************************************************
+ * IdealTEK URTC1000 Part
+ */
+#ifdef CONFIG_TOUCHSCREEN_USB_IDEALTEK
+#ifndef MULTI_PACKET
+#define MULTI_PACKET
+#endif
+static int idealtek_get_pkt_len(unsigned char *buf, int len)
+{
+ if (buf[0] & 0x80)
+ return 5;
+ if (buf[0] == 0x01)
+ return len;
+ return 0;
+}
+
+static int idealtek_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+ switch (pkt[0] & 0x98) {
+ case 0x88:
+ /* touch data in IdealTEK mode */
+ dev->x = (pkt[1] << 5) | (pkt[2] >> 2);
+ dev->y = (pkt[3] << 5) | (pkt[4] >> 2);
+ dev->touch = (pkt[0] & 0x40) ? 1 : 0;
+ return 1;
+
+ case 0x98:
+ /* touch data in MT emulation mode */
+ dev->x = (pkt[2] << 5) | (pkt[1] >> 2);
+ dev->y = (pkt[4] << 5) | (pkt[3] >> 2);
+ dev->touch = (pkt[0] & 0x40) ? 1 : 0;
+ return 1;
+
+ default:
+ return 0;
+ }
+}
+#endif
+
+/*****************************************************************************
+ * General Touch Part
+ */
+#ifdef CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH
+static int general_touch_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+ dev->x = (pkt[2] << 8) | pkt[1];
+ dev->y = (pkt[4] << 8) | pkt[3];
+ dev->press = pkt[5] & 0xff;
+ dev->touch = pkt[0] & 0x01;
+
+ return 1;
+}
+#endif
+
+/*****************************************************************************
+ * GoTop Part
+ */
+#ifdef CONFIG_TOUCHSCREEN_USB_GOTOP
+static int gotop_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+ dev->x = ((pkt[1] & 0x38) << 4) | pkt[2];
+ dev->y = ((pkt[1] & 0x07) << 7) | pkt[3];
+ dev->touch = pkt[0] & 0x01;
+
+ return 1;
+}
+#endif
+
+/*****************************************************************************
+ * JASTEC Part
+ */
+#ifdef CONFIG_TOUCHSCREEN_USB_JASTEC
+static int jastec_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+ dev->x = ((pkt[0] & 0x3f) << 6) | (pkt[2] & 0x3f);
+ dev->y = ((pkt[1] & 0x3f) << 6) | (pkt[3] & 0x3f);
+ dev->touch = (pkt[0] & 0x40) >> 6;
+
+ return 1;
+}
+#endif
+
+/*****************************************************************************
+ * Zytronic Part
+ */
+#ifdef CONFIG_TOUCHSCREEN_USB_ZYTRONIC
+static int zytronic_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+ struct usb_interface *intf = dev->interface;
+
+ switch (pkt[0]) {
+ case 0x3A: /* command response */
+ dev_dbg(&intf->dev, "%s: Command response %d\n", __func__, pkt[1]);
+ break;
+
+ case 0xC0: /* down */
+ dev->x = (pkt[1] & 0x7f) | ((pkt[2] & 0x07) << 7);
+ dev->y = (pkt[3] & 0x7f) | ((pkt[4] & 0x07) << 7);
+ dev->touch = 1;
+ dev_dbg(&intf->dev, "%s: down %d,%d\n", __func__, dev->x, dev->y);
+ return 1;
+
+ case 0x80: /* up */
+ dev->x = (pkt[1] & 0x7f) | ((pkt[2] & 0x07) << 7);
+ dev->y = (pkt[3] & 0x7f) | ((pkt[4] & 0x07) << 7);
+ dev->touch = 0;
+ dev_dbg(&intf->dev, "%s: up %d,%d\n", __func__, dev->x, dev->y);
+ return 1;
+
+ default:
+ dev_dbg(&intf->dev, "%s: Unknown return %d\n", __func__, pkt[0]);
+ break;
+ }
+
+ return 0;
+}
+#endif
+
+/*****************************************************************************
+ * NEXIO Part
+ */
+#ifdef CONFIG_TOUCHSCREEN_USB_NEXIO
+
+#define NEXIO_TIMEOUT 5000
+#define NEXIO_BUFSIZE 1024
+#define NEXIO_THRESHOLD 50
+
+struct nexio_priv {
+ struct urb *ack;
+ unsigned char *ack_buf;
+};
+
+struct nexio_touch_packet {
+ u8 flags; /* 0xe1 = touch, 0xe1 = release */
+ __be16 data_len; /* total bytes of touch data */
+ __be16 x_len; /* bytes for X axis */
+ __be16 y_len; /* bytes for Y axis */
+ u8 data[];
+} __attribute__ ((packed));
+
+static unsigned char nexio_ack_pkt[2] = { 0xaa, 0x02 };
+static unsigned char nexio_init_pkt[4] = { 0x82, 0x04, 0x0a, 0x0f };
+
+static void nexio_ack_complete(struct urb *urb)
+{
+}
+
+static int nexio_alloc(struct usbtouch_usb *usbtouch)
+{
+ struct nexio_priv *priv;
+ int ret = -ENOMEM;
+
+ usbtouch->priv = kmalloc(sizeof(struct nexio_priv), GFP_KERNEL);
+ if (!usbtouch->priv)
+ goto out_buf;
+
+ priv = usbtouch->priv;
+
+ priv->ack_buf = kmemdup(nexio_ack_pkt, sizeof(nexio_ack_pkt),
+ GFP_KERNEL);
+ if (!priv->ack_buf)
+ goto err_priv;
+
+ priv->ack = usb_alloc_urb(0, GFP_KERNEL);
+ if (!priv->ack) {
+ dev_dbg(&usbtouch->interface->dev,
+ "%s - usb_alloc_urb failed: usbtouch->ack\n", __func__);
+ goto err_ack_buf;
+ }
+
+ return 0;
+
+err_ack_buf:
+ kfree(priv->ack_buf);
+err_priv:
+ kfree(priv);
+out_buf:
+ return ret;
+}
+
+static int nexio_init(struct usbtouch_usb *usbtouch)
+{
+ struct usb_device *dev = interface_to_usbdev(usbtouch->interface);
+ struct usb_host_interface *interface = usbtouch->interface->cur_altsetting;
+ struct nexio_priv *priv = usbtouch->priv;
+ int ret = -ENOMEM;
+ int actual_len, i;
+ unsigned char *buf;
+ char *firmware_ver = NULL, *device_name = NULL;
+ int input_ep = 0, output_ep = 0;
+
+ /* find first input and output endpoint */
+ for (i = 0; i < interface->desc.bNumEndpoints; i++) {
+ if (!input_ep &&
+ usb_endpoint_dir_in(&interface->endpoint[i].desc))
+ input_ep = interface->endpoint[i].desc.bEndpointAddress;
+ if (!output_ep &&
+ usb_endpoint_dir_out(&interface->endpoint[i].desc))
+ output_ep = interface->endpoint[i].desc.bEndpointAddress;
+ }
+ if (!input_ep || !output_ep)
+ return -ENXIO;
+
+ buf = kmalloc(NEXIO_BUFSIZE, GFP_NOIO);
+ if (!buf)
+ goto out_buf;
+
+ /* two empty reads */
+ for (i = 0; i < 2; i++) {
+ ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, input_ep),
+ buf, NEXIO_BUFSIZE, &actual_len,
+ NEXIO_TIMEOUT);
+ if (ret < 0)
+ goto out_buf;
+ }
+
+ /* send init command */
+ memcpy(buf, nexio_init_pkt, sizeof(nexio_init_pkt));
+ ret = usb_bulk_msg(dev, usb_sndbulkpipe(dev, output_ep),
+ buf, sizeof(nexio_init_pkt), &actual_len,
+ NEXIO_TIMEOUT);
+ if (ret < 0)
+ goto out_buf;
+
+ /* read replies */
+ for (i = 0; i < 3; i++) {
+ memset(buf, 0, NEXIO_BUFSIZE);
+ ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, input_ep),
+ buf, NEXIO_BUFSIZE, &actual_len,
+ NEXIO_TIMEOUT);
+ if (ret < 0 || actual_len < 1 || buf[1] != actual_len)
+ continue;
+ switch (buf[0]) {
+ case 0x83: /* firmware version */
+ if (!firmware_ver)
+ firmware_ver = kstrdup(&buf[2], GFP_NOIO);
+ break;
+ case 0x84: /* device name */
+ if (!device_name)
+ device_name = kstrdup(&buf[2], GFP_NOIO);
+ break;
+ }
+ }
+
+ printk(KERN_INFO "Nexio device: %s, firmware version: %s\n",
+ device_name, firmware_ver);
+
+ kfree(firmware_ver);
+ kfree(device_name);
+
+ usb_fill_bulk_urb(priv->ack, dev, usb_sndbulkpipe(dev, output_ep),
+ priv->ack_buf, sizeof(nexio_ack_pkt),
+ nexio_ack_complete, usbtouch);
+ ret = 0;
+
+out_buf:
+ kfree(buf);
+ return ret;
+}
+
+static void nexio_exit(struct usbtouch_usb *usbtouch)
+{
+ struct nexio_priv *priv = usbtouch->priv;
+
+ usb_kill_urb(priv->ack);
+ usb_free_urb(priv->ack);
+ kfree(priv->ack_buf);
+ kfree(priv);
+}
+
+static int nexio_read_data(struct usbtouch_usb *usbtouch, unsigned char *pkt)
+{
+ struct nexio_touch_packet *packet = (void *) pkt;
+ struct nexio_priv *priv = usbtouch->priv;
+ unsigned int data_len = be16_to_cpu(packet->data_len);
+ unsigned int x_len = be16_to_cpu(packet->x_len);
+ unsigned int y_len = be16_to_cpu(packet->y_len);
+ int x, y, begin_x, begin_y, end_x, end_y, w, h, ret;
+
+ /* got touch data? */
+ if ((pkt[0] & 0xe0) != 0xe0)
+ return 0;
+
+ if (data_len > 0xff)
+ data_len -= 0x100;
+ if (x_len > 0xff)
+ x_len -= 0x80;
+
+ /* send ACK */
+ ret = usb_submit_urb(priv->ack, GFP_ATOMIC);
+
+ if (!usbtouch->type->max_xc) {
+ usbtouch->type->max_xc = 2 * x_len;
+ input_set_abs_params(usbtouch->input, ABS_X,
+ 0, usbtouch->type->max_xc, 0, 0);
+ usbtouch->type->max_yc = 2 * y_len;
+ input_set_abs_params(usbtouch->input, ABS_Y,
+ 0, usbtouch->type->max_yc, 0, 0);
+ }
+ /*
+ * The device reports state of IR sensors on X and Y axes.
+ * Each byte represents "darkness" percentage (0-100) of one element.
+ * 17" touchscreen reports only 64 x 52 bytes so the resolution is low.
+ * This also means that there's a limited multi-touch capability but
+ * it's disabled (and untested) here as there's no X driver for that.
+ */
+ begin_x = end_x = begin_y = end_y = -1;
+ for (x = 0; x < x_len; x++) {
+ if (begin_x == -1 && packet->data[x] > NEXIO_THRESHOLD) {
+ begin_x = x;
+ continue;
+ }
+ if (end_x == -1 && begin_x != -1 && packet->data[x] < NEXIO_THRESHOLD) {
+ end_x = x - 1;
+ for (y = x_len; y < data_len; y++) {
+ if (begin_y == -1 && packet->data[y] > NEXIO_THRESHOLD) {
+ begin_y = y - x_len;
+ continue;
+ }
+ if (end_y == -1 &&
+ begin_y != -1 && packet->data[y] < NEXIO_THRESHOLD) {
+ end_y = y - 1 - x_len;
+ w = end_x - begin_x;
+ h = end_y - begin_y;
+#if 0
+ /* multi-touch */
+ input_report_abs(usbtouch->input,
+ ABS_MT_TOUCH_MAJOR, max(w,h));
+ input_report_abs(usbtouch->input,
+ ABS_MT_TOUCH_MINOR, min(x,h));
+ input_report_abs(usbtouch->input,
+ ABS_MT_POSITION_X, 2*begin_x+w);
+ input_report_abs(usbtouch->input,
+ ABS_MT_POSITION_Y, 2*begin_y+h);
+ input_report_abs(usbtouch->input,
+ ABS_MT_ORIENTATION, w > h);
+ input_mt_sync(usbtouch->input);
+#endif
+ /* single touch */
+ usbtouch->x = 2 * begin_x + w;
+ usbtouch->y = 2 * begin_y + h;
+ usbtouch->touch = packet->flags & 0x01;
+ begin_y = end_y = -1;
+ return 1;
+ }
+ }
+ begin_x = end_x = -1;
+ }
+
+ }
+ return 0;
+}
+#endif
+
+
+/*****************************************************************************
+ * ELO part
+ */
+
+#ifdef CONFIG_TOUCHSCREEN_USB_ELO
+
+static int elo_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+ dev->x = (pkt[3] << 8) | pkt[2];
+ dev->y = (pkt[5] << 8) | pkt[4];
+ dev->touch = pkt[6] > 0;
+ dev->press = pkt[6];
+
+ return 1;
+}
+#endif
+
+
+/*****************************************************************************
+ * the different device descriptors
+ */
+#ifdef MULTI_PACKET
+static void usbtouch_process_multi(struct usbtouch_usb *usbtouch,
+ unsigned char *pkt, int len);
+#endif
+
+static struct usbtouch_device_info usbtouch_dev_info[] = {
+#ifdef CONFIG_TOUCHSCREEN_USB_ELO
+ [DEVTYPE_ELO] = {
+ .min_xc = 0x0,
+ .max_xc = 0x0fff,
+ .min_yc = 0x0,
+ .max_yc = 0x0fff,
+ .max_press = 0xff,
+ .rept_size = 8,
+ .read_data = elo_read_data,
+ },
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_EGALAX
+ [DEVTYPE_EGALAX] = {
+ .min_xc = 0x0,
+ .max_xc = 0x07ff,
+ .min_yc = 0x0,
+ .max_yc = 0x07ff,
+ .rept_size = 16,
+ .process_pkt = usbtouch_process_multi,
+ .get_pkt_len = egalax_get_pkt_len,
+ .read_data = egalax_read_data,
+ .init = egalax_init,
+ },
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_PANJIT
+ [DEVTYPE_PANJIT] = {
+ .min_xc = 0x0,
+ .max_xc = 0x0fff,
+ .min_yc = 0x0,
+ .max_yc = 0x0fff,
+ .rept_size = 8,
+ .read_data = panjit_read_data,
+ },
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_3M
+ [DEVTYPE_3M] = {
+ .min_xc = 0x0,
+ .max_xc = 0x4000,
+ .min_yc = 0x0,
+ .max_yc = 0x4000,
+ .rept_size = 11,
+ .read_data = mtouch_read_data,
+ .init = mtouch_init,
+ },
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_ITM
+ [DEVTYPE_ITM] = {
+ .min_xc = 0x0,
+ .max_xc = 0x0fff,
+ .min_yc = 0x0,
+ .max_yc = 0x0fff,
+ .max_press = 0xff,
+ .rept_size = 8,
+ .read_data = itm_read_data,
+ },
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_ETURBO
+ [DEVTYPE_ETURBO] = {
+ .min_xc = 0x0,
+ .max_xc = 0x07ff,
+ .min_yc = 0x0,
+ .max_yc = 0x07ff,
+ .rept_size = 8,
+ .process_pkt = usbtouch_process_multi,
+ .get_pkt_len = eturbo_get_pkt_len,
+ .read_data = eturbo_read_data,
+ },
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_GUNZE
+ [DEVTYPE_GUNZE] = {
+ .min_xc = 0x0,
+ .max_xc = 0x0fff,
+ .min_yc = 0x0,
+ .max_yc = 0x0fff,
+ .rept_size = 4,
+ .read_data = gunze_read_data,
+ },
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_DMC_TSC10
+ [DEVTYPE_DMC_TSC10] = {
+ .min_xc = 0x0,
+ .max_xc = 0x03ff,
+ .min_yc = 0x0,
+ .max_yc = 0x03ff,
+ .rept_size = 5,
+ .init = dmc_tsc10_init,
+ .read_data = dmc_tsc10_read_data,
+ },
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_IRTOUCH
+ [DEVTYPE_IRTOUCH] = {
+ .min_xc = 0x0,
+ .max_xc = 0x0fff,
+ .min_yc = 0x0,
+ .max_yc = 0x0fff,
+ .rept_size = 8,
+ .read_data = irtouch_read_data,
+ },
+
+ [DEVTYPE_IRTOUCH_HIRES] = {
+ .min_xc = 0x0,
+ .max_xc = 0x7fff,
+ .min_yc = 0x0,
+ .max_yc = 0x7fff,
+ .rept_size = 8,
+ .read_data = irtouch_read_data,
+ },
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_IDEALTEK
+ [DEVTYPE_IDEALTEK] = {
+ .min_xc = 0x0,
+ .max_xc = 0x0fff,
+ .min_yc = 0x0,
+ .max_yc = 0x0fff,
+ .rept_size = 8,
+ .process_pkt = usbtouch_process_multi,
+ .get_pkt_len = idealtek_get_pkt_len,
+ .read_data = idealtek_read_data,
+ },
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH
+ [DEVTYPE_GENERAL_TOUCH] = {
+ .min_xc = 0x0,
+ .max_xc = 0x7fff,
+ .min_yc = 0x0,
+ .max_yc = 0x7fff,
+ .rept_size = 7,
+ .read_data = general_touch_read_data,
+ },
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_GOTOP
+ [DEVTYPE_GOTOP] = {
+ .min_xc = 0x0,
+ .max_xc = 0x03ff,
+ .min_yc = 0x0,
+ .max_yc = 0x03ff,
+ .rept_size = 4,
+ .read_data = gotop_read_data,
+ },
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_JASTEC
+ [DEVTYPE_JASTEC] = {
+ .min_xc = 0x0,
+ .max_xc = 0x0fff,
+ .min_yc = 0x0,
+ .max_yc = 0x0fff,
+ .rept_size = 4,
+ .read_data = jastec_read_data,
+ },
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_E2I
+ [DEVTYPE_E2I] = {
+ .min_xc = 0x0,
+ .max_xc = 0x7fff,
+ .min_yc = 0x0,
+ .max_yc = 0x7fff,
+ .rept_size = 6,
+ .init = e2i_init,
+ .read_data = e2i_read_data,
+ },
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_ZYTRONIC
+ [DEVTYPE_ZYTRONIC] = {
+ .min_xc = 0x0,
+ .max_xc = 0x03ff,
+ .min_yc = 0x0,
+ .max_yc = 0x03ff,
+ .rept_size = 5,
+ .read_data = zytronic_read_data,
+ .irq_always = true,
+ },
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC45USB
+ [DEVTYPE_TC45USB] = {
+ .min_xc = 0x0,
+ .max_xc = 0x0fff,
+ .min_yc = 0x0,
+ .max_yc = 0x0fff,
+ .rept_size = 5,
+ .read_data = tc45usb_read_data,
+ },
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_NEXIO
+ [DEVTYPE_NEXIO] = {
+ .rept_size = 1024,
+ .irq_always = true,
+ .read_data = nexio_read_data,
+ .alloc = nexio_alloc,
+ .init = nexio_init,
+ .exit = nexio_exit,
+ },
+#endif
+#ifdef CONFIG_TOUCHSCREEN_USB_EASYTOUCH
+ [DEVTYPE_ETOUCH] = {
+ .min_xc = 0x0,
+ .max_xc = 0x07ff,
+ .min_yc = 0x0,
+ .max_yc = 0x07ff,
+ .rept_size = 16,
+ .process_pkt = usbtouch_process_multi,
+ .get_pkt_len = etouch_get_pkt_len,
+ .read_data = etouch_read_data,
+ },
+#endif
+};
+
+
+/*****************************************************************************
+ * Generic Part
+ */
+static void usbtouch_process_pkt(struct usbtouch_usb *usbtouch,
+ unsigned char *pkt, int len)
+{
+ struct usbtouch_device_info *type = usbtouch->type;
+
+ if (!type->read_data(usbtouch, pkt))
+ return;
+
+ input_report_key(usbtouch->input, BTN_TOUCH, usbtouch->touch);
+
+ if (swap_xy) {
+ input_report_abs(usbtouch->input, ABS_X, usbtouch->y);
+ input_report_abs(usbtouch->input, ABS_Y, usbtouch->x);
+ } else {
+ input_report_abs(usbtouch->input, ABS_X, usbtouch->x);
+ input_report_abs(usbtouch->input, ABS_Y, usbtouch->y);
+ }
+ if (type->max_press)
+ input_report_abs(usbtouch->input, ABS_PRESSURE, usbtouch->press);
+ input_sync(usbtouch->input);
+}
+
+
+#ifdef MULTI_PACKET
+static void usbtouch_process_multi(struct usbtouch_usb *usbtouch,
+ unsigned char *pkt, int len)
+{
+ unsigned char *buffer;
+ int pkt_len, pos, buf_len, tmp;
+
+ /* process buffer */
+ if (unlikely(usbtouch->buf_len)) {
+ /* try to get size */
+ pkt_len = usbtouch->type->get_pkt_len(
+ usbtouch->buffer, usbtouch->buf_len);
+
+ /* drop? */
+ if (unlikely(!pkt_len))
+ goto out_flush_buf;
+
+ /* need to append -pkt_len bytes before able to get size */
+ if (unlikely(pkt_len < 0)) {
+ int append = -pkt_len;
+ if (unlikely(append > len))
+ append = len;
+ if (usbtouch->buf_len + append >= usbtouch->type->rept_size)
+ goto out_flush_buf;
+ memcpy(usbtouch->buffer + usbtouch->buf_len, pkt, append);
+ usbtouch->buf_len += append;
+
+ pkt_len = usbtouch->type->get_pkt_len(
+ usbtouch->buffer, usbtouch->buf_len);
+ if (pkt_len < 0)
+ return;
+ }
+
+ /* append */
+ tmp = pkt_len - usbtouch->buf_len;
+ if (usbtouch->buf_len + tmp >= usbtouch->type->rept_size)
+ goto out_flush_buf;
+ memcpy(usbtouch->buffer + usbtouch->buf_len, pkt, tmp);
+ usbtouch_process_pkt(usbtouch, usbtouch->buffer, pkt_len);
+
+ buffer = pkt + tmp;
+ buf_len = len - tmp;
+ } else {
+ buffer = pkt;
+ buf_len = len;
+ }
+
+ /* loop over the received packet, process */
+ pos = 0;
+ while (pos < buf_len) {
+ /* get packet len */
+ pkt_len = usbtouch->type->get_pkt_len(buffer + pos,
+ buf_len - pos);
+
+ /* unknown packet: skip one byte */
+ if (unlikely(!pkt_len)) {
+ pos++;
+ continue;
+ }
+
+ /* full packet: process */
+ if (likely((pkt_len > 0) && (pkt_len <= buf_len - pos))) {
+ usbtouch_process_pkt(usbtouch, buffer + pos, pkt_len);
+ } else {
+ /* incomplete packet: save in buffer */
+ memcpy(usbtouch->buffer, buffer + pos, buf_len - pos);
+ usbtouch->buf_len = buf_len - pos;
+ return;
+ }
+ pos += pkt_len;
+ }
+
+out_flush_buf:
+ usbtouch->buf_len = 0;
+ return;
+}
+#endif
+
+
+static void usbtouch_irq(struct urb *urb)
+{
+ struct usbtouch_usb *usbtouch = urb->context;
+ struct device *dev = &usbtouch->interface->dev;
+ int retval;
+
+ switch (urb->status) {
+ case 0:
+ /* success */
+ break;
+ case -ETIME:
+ /* this urb is timing out */
+ dev_dbg(dev,
+ "%s - urb timed out - was the device unplugged?\n",
+ __func__);
+ return;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ case -EPIPE:
+ /* this urb is terminated, clean up */
+ dev_dbg(dev, "%s - urb shutting down with status: %d\n",
+ __func__, urb->status);
+ return;
+ default:
+ dev_dbg(dev, "%s - nonzero urb status received: %d\n",
+ __func__, urb->status);
+ goto exit;
+ }
+
+ usbtouch->type->process_pkt(usbtouch, usbtouch->data, urb->actual_length);
+
+exit:
+ usb_mark_last_busy(interface_to_usbdev(usbtouch->interface));
+ retval = usb_submit_urb(urb, GFP_ATOMIC);
+ if (retval)
+ dev_err(dev, "%s - usb_submit_urb failed with result: %d\n",
+ __func__, retval);
+}
+
+static int usbtouch_open(struct input_dev *input)
+{
+ struct usbtouch_usb *usbtouch = input_get_drvdata(input);
+ int r;
+
+ usbtouch->irq->dev = interface_to_usbdev(usbtouch->interface);
+
+ r = usb_autopm_get_interface(usbtouch->interface) ? -EIO : 0;
+ if (r < 0)
+ goto out;
+
+ if (!usbtouch->type->irq_always) {
+ if (usb_submit_urb(usbtouch->irq, GFP_KERNEL)) {
+ r = -EIO;
+ goto out_put;
+ }
+ }
+
+ usbtouch->interface->needs_remote_wakeup = 1;
+out_put:
+ usb_autopm_put_interface(usbtouch->interface);
+out:
+ return r;
+}
+
+static void usbtouch_close(struct input_dev *input)
+{
+ struct usbtouch_usb *usbtouch = input_get_drvdata(input);
+ int r;
+
+ if (!usbtouch->type->irq_always)
+ usb_kill_urb(usbtouch->irq);
+ r = usb_autopm_get_interface(usbtouch->interface);
+ usbtouch->interface->needs_remote_wakeup = 0;
+ if (!r)
+ usb_autopm_put_interface(usbtouch->interface);
+}
+
+static int usbtouch_suspend
+(struct usb_interface *intf, pm_message_t message)
+{
+ struct usbtouch_usb *usbtouch = usb_get_intfdata(intf);
+
+ usb_kill_urb(usbtouch->irq);
+
+ return 0;
+}
+
+static int usbtouch_resume(struct usb_interface *intf)
+{
+ struct usbtouch_usb *usbtouch = usb_get_intfdata(intf);
+ struct input_dev *input = usbtouch->input;
+ int result = 0;
+
+ mutex_lock(&input->mutex);
+ if (input->users || usbtouch->type->irq_always)
+ result = usb_submit_urb(usbtouch->irq, GFP_NOIO);
+ mutex_unlock(&input->mutex);
+
+ return result;
+}
+
+static int usbtouch_reset_resume(struct usb_interface *intf)
+{
+ struct usbtouch_usb *usbtouch = usb_get_intfdata(intf);
+ struct input_dev *input = usbtouch->input;
+ int err = 0;
+
+ /* reinit the device */
+ if (usbtouch->type->init) {
+ err = usbtouch->type->init(usbtouch);
+ if (err) {
+ dev_dbg(&intf->dev,
+ "%s - type->init() failed, err: %d\n",
+ __func__, err);
+ return err;
+ }
+ }
+
+ /* restart IO if needed */
+ mutex_lock(&input->mutex);
+ if (input->users)
+ err = usb_submit_urb(usbtouch->irq, GFP_NOIO);
+ mutex_unlock(&input->mutex);
+
+ return err;
+}
+
+static void usbtouch_free_buffers(struct usb_device *udev,
+ struct usbtouch_usb *usbtouch)
+{
+ usb_free_coherent(udev, usbtouch->data_size,
+ usbtouch->data, usbtouch->data_dma);
+ kfree(usbtouch->buffer);
+}
+
+static struct usb_endpoint_descriptor *
+usbtouch_get_input_endpoint(struct usb_host_interface *interface)
+{
+ int i;
+
+ for (i = 0; i < interface->desc.bNumEndpoints; i++)
+ if (usb_endpoint_dir_in(&interface->endpoint[i].desc))
+ return &interface->endpoint[i].desc;
+
+ return NULL;
+}
+
+static int usbtouch_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usbtouch_usb *usbtouch;
+ struct input_dev *input_dev;
+ struct usb_endpoint_descriptor *endpoint;
+ struct usb_device *udev = interface_to_usbdev(intf);
+ struct usbtouch_device_info *type;
+ int err = -ENOMEM;
+
+ /* some devices are ignored */
+ if (id->driver_info == DEVTYPE_IGNORE)
+ return -ENODEV;
+
+ endpoint = usbtouch_get_input_endpoint(intf->cur_altsetting);
+ if (!endpoint)
+ return -ENXIO;
+
+ usbtouch = kzalloc(sizeof(struct usbtouch_usb), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!usbtouch || !input_dev)
+ goto out_free;
+
+ type = &usbtouch_dev_info[id->driver_info];
+ usbtouch->type = type;
+ if (!type->process_pkt)
+ type->process_pkt = usbtouch_process_pkt;
+
+ usbtouch->data_size = type->rept_size;
+ if (type->get_pkt_len) {
+ /*
+ * When dealing with variable-length packets we should
+ * not request more than wMaxPacketSize bytes at once
+ * as we do not know if there is more data coming or
+ * we filled exactly wMaxPacketSize bytes and there is
+ * nothing else.
+ */
+ usbtouch->data_size = min(usbtouch->data_size,
+ usb_endpoint_maxp(endpoint));
+ }
+
+ usbtouch->data = usb_alloc_coherent(udev, usbtouch->data_size,
+ GFP_KERNEL, &usbtouch->data_dma);
+ if (!usbtouch->data)
+ goto out_free;
+
+ if (type->get_pkt_len) {
+ usbtouch->buffer = kmalloc(type->rept_size, GFP_KERNEL);
+ if (!usbtouch->buffer)
+ goto out_free_buffers;
+ }
+
+ usbtouch->irq = usb_alloc_urb(0, GFP_KERNEL);
+ if (!usbtouch->irq) {
+ dev_dbg(&intf->dev,
+ "%s - usb_alloc_urb failed: usbtouch->irq\n", __func__);
+ goto out_free_buffers;
+ }
+
+ usbtouch->interface = intf;
+ usbtouch->input = input_dev;
+
+ if (udev->manufacturer)
+ strlcpy(usbtouch->name, udev->manufacturer, sizeof(usbtouch->name));
+
+ if (udev->product) {
+ if (udev->manufacturer)
+ strlcat(usbtouch->name, " ", sizeof(usbtouch->name));
+ strlcat(usbtouch->name, udev->product, sizeof(usbtouch->name));
+ }
+
+ if (!strlen(usbtouch->name))
+ snprintf(usbtouch->name, sizeof(usbtouch->name),
+ "USB Touchscreen %04x:%04x",
+ le16_to_cpu(udev->descriptor.idVendor),
+ le16_to_cpu(udev->descriptor.idProduct));
+
+ usb_make_path(udev, usbtouch->phys, sizeof(usbtouch->phys));
+ strlcat(usbtouch->phys, "/input0", sizeof(usbtouch->phys));
+
+ input_dev->name = usbtouch->name;
+ input_dev->phys = usbtouch->phys;
+ usb_to_input_id(udev, &input_dev->id);
+ input_dev->dev.parent = &intf->dev;
+
+ input_set_drvdata(input_dev, usbtouch);
+
+ input_dev->open = usbtouch_open;
+ input_dev->close = usbtouch_close;
+
+ input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+ input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+ input_set_abs_params(input_dev, ABS_X, type->min_xc, type->max_xc, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y, type->min_yc, type->max_yc, 0, 0);
+ if (type->max_press)
+ input_set_abs_params(input_dev, ABS_PRESSURE, type->min_press,
+ type->max_press, 0, 0);
+
+ if (usb_endpoint_type(endpoint) == USB_ENDPOINT_XFER_INT)
+ usb_fill_int_urb(usbtouch->irq, udev,
+ usb_rcvintpipe(udev, endpoint->bEndpointAddress),
+ usbtouch->data, usbtouch->data_size,
+ usbtouch_irq, usbtouch, endpoint->bInterval);
+ else
+ usb_fill_bulk_urb(usbtouch->irq, udev,
+ usb_rcvbulkpipe(udev, endpoint->bEndpointAddress),
+ usbtouch->data, usbtouch->data_size,
+ usbtouch_irq, usbtouch);
+
+ usbtouch->irq->dev = udev;
+ usbtouch->irq->transfer_dma = usbtouch->data_dma;
+ usbtouch->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ /* device specific allocations */
+ if (type->alloc) {
+ err = type->alloc(usbtouch);
+ if (err) {
+ dev_dbg(&intf->dev,
+ "%s - type->alloc() failed, err: %d\n",
+ __func__, err);
+ goto out_free_urb;
+ }
+ }
+
+ /* device specific initialisation*/
+ if (type->init) {
+ err = type->init(usbtouch);
+ if (err) {
+ dev_dbg(&intf->dev,
+ "%s - type->init() failed, err: %d\n",
+ __func__, err);
+ goto out_do_exit;
+ }
+ }
+
+ err = input_register_device(usbtouch->input);
+ if (err) {
+ dev_dbg(&intf->dev,
+ "%s - input_register_device failed, err: %d\n",
+ __func__, err);
+ goto out_do_exit;
+ }
+
+ usb_set_intfdata(intf, usbtouch);
+
+ if (usbtouch->type->irq_always) {
+ /* this can't fail */
+ usb_autopm_get_interface(intf);
+ err = usb_submit_urb(usbtouch->irq, GFP_KERNEL);
+ if (err) {
+ usb_autopm_put_interface(intf);
+ dev_err(&intf->dev,
+ "%s - usb_submit_urb failed with result: %d\n",
+ __func__, err);
+ goto out_unregister_input;
+ }
+ }
+
+ return 0;
+
+out_unregister_input:
+ input_unregister_device(input_dev);
+ input_dev = NULL;
+out_do_exit:
+ if (type->exit)
+ type->exit(usbtouch);
+out_free_urb:
+ usb_free_urb(usbtouch->irq);
+out_free_buffers:
+ usbtouch_free_buffers(udev, usbtouch);
+out_free:
+ input_free_device(input_dev);
+ kfree(usbtouch);
+ return err;
+}
+
+static void usbtouch_disconnect(struct usb_interface *intf)
+{
+ struct usbtouch_usb *usbtouch = usb_get_intfdata(intf);
+
+ if (!usbtouch)
+ return;
+
+ dev_dbg(&intf->dev,
+ "%s - usbtouch is initialized, cleaning up\n", __func__);
+
+ usb_set_intfdata(intf, NULL);
+ /* this will stop IO via close */
+ input_unregister_device(usbtouch->input);
+ usb_free_urb(usbtouch->irq);
+ if (usbtouch->type->exit)
+ usbtouch->type->exit(usbtouch);
+ usbtouch_free_buffers(interface_to_usbdev(intf), usbtouch);
+ kfree(usbtouch);
+}
+
+MODULE_DEVICE_TABLE(usb, usbtouch_devices);
+
+static struct usb_driver usbtouch_driver = {
+ .name = "usbtouchscreen",
+ .probe = usbtouch_probe,
+ .disconnect = usbtouch_disconnect,
+ .suspend = usbtouch_suspend,
+ .resume = usbtouch_resume,
+ .reset_resume = usbtouch_reset_resume,
+ .id_table = usbtouch_devices,
+ .supports_autosuspend = 1,
+};
+
+module_usb_driver(usbtouch_driver);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+MODULE_ALIAS("touchkitusb");
+MODULE_ALIAS("itmtouch");
+MODULE_ALIAS("mtouchusb");
Code Review / kvmfornfv.git / blobdiff