Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / input / touchscreen / mtouch.c
diff --git a/kernel/drivers/input/touchscreen/mtouch.c b/kernel/drivers/input/touchscreen/mtouch.c
new file mode 100644 (file)
index 0000000..9b5552a
--- /dev/null
@@ -0,0 +1,204 @@
+/*
+ * MicroTouch (3M) serial touchscreen driver
+ *
+ * Copyright (c) 2004 Vojtech Pavlik
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+/*
+ * 2005/02/19 Dan Streetman <ddstreet@ieee.org>
+ *   Copied elo.c and edited for MicroTouch protocol
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+
+#define DRIVER_DESC    "MicroTouch serial touchscreen driver"
+
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+/*
+ * Definitions & global arrays.
+ */
+
+#define MTOUCH_FORMAT_TABLET_STATUS_BIT 0x80
+#define MTOUCH_FORMAT_TABLET_TOUCH_BIT 0x40
+#define MTOUCH_FORMAT_TABLET_LENGTH 5
+#define MTOUCH_RESPONSE_BEGIN_BYTE 0x01
+#define MTOUCH_RESPONSE_END_BYTE 0x0d
+
+/* todo: check specs for max length of all responses */
+#define MTOUCH_MAX_LENGTH 16
+
+#define MTOUCH_MIN_XC 0
+#define MTOUCH_MAX_XC 0x3fff
+#define MTOUCH_MIN_YC 0
+#define MTOUCH_MAX_YC 0x3fff
+
+#define MTOUCH_GET_XC(data) (((data[2])<<7) | data[1])
+#define MTOUCH_GET_YC(data) (((data[4])<<7) | data[3])
+#define MTOUCH_GET_TOUCHED(data) (MTOUCH_FORMAT_TABLET_TOUCH_BIT & data[0])
+
+/*
+ * Per-touchscreen data.
+ */
+
+struct mtouch {
+       struct input_dev *dev;
+       struct serio *serio;
+       int idx;
+       unsigned char data[MTOUCH_MAX_LENGTH];
+       char phys[32];
+};
+
+static void mtouch_process_format_tablet(struct mtouch *mtouch)
+{
+       struct input_dev *dev = mtouch->dev;
+
+       if (MTOUCH_FORMAT_TABLET_LENGTH == ++mtouch->idx) {
+               input_report_abs(dev, ABS_X, MTOUCH_GET_XC(mtouch->data));
+               input_report_abs(dev, ABS_Y, MTOUCH_MAX_YC - MTOUCH_GET_YC(mtouch->data));
+               input_report_key(dev, BTN_TOUCH, MTOUCH_GET_TOUCHED(mtouch->data));
+               input_sync(dev);
+
+               mtouch->idx = 0;
+       }
+}
+
+static void mtouch_process_response(struct mtouch *mtouch)
+{
+       if (MTOUCH_RESPONSE_END_BYTE == mtouch->data[mtouch->idx++]) {
+               /* FIXME - process response */
+               mtouch->idx = 0;
+       } else if (MTOUCH_MAX_LENGTH == mtouch->idx) {
+               printk(KERN_ERR "mtouch.c: too many response bytes\n");
+               mtouch->idx = 0;
+       }
+}
+
+static irqreturn_t mtouch_interrupt(struct serio *serio,
+               unsigned char data, unsigned int flags)
+{
+       struct mtouch* mtouch = serio_get_drvdata(serio);
+
+       mtouch->data[mtouch->idx] = data;
+
+       if (MTOUCH_FORMAT_TABLET_STATUS_BIT & mtouch->data[0])
+               mtouch_process_format_tablet(mtouch);
+       else if (MTOUCH_RESPONSE_BEGIN_BYTE == mtouch->data[0])
+               mtouch_process_response(mtouch);
+       else
+               printk(KERN_DEBUG "mtouch.c: unknown/unsynchronized data from device, byte %x\n",mtouch->data[0]);
+
+       return IRQ_HANDLED;
+}
+
+/*
+ * mtouch_disconnect() is the opposite of mtouch_connect()
+ */
+
+static void mtouch_disconnect(struct serio *serio)
+{
+       struct mtouch* mtouch = serio_get_drvdata(serio);
+
+       input_get_device(mtouch->dev);
+       input_unregister_device(mtouch->dev);
+       serio_close(serio);
+       serio_set_drvdata(serio, NULL);
+       input_put_device(mtouch->dev);
+       kfree(mtouch);
+}
+
+/*
+ * mtouch_connect() is the routine that is called when someone adds a
+ * new serio device that supports MicroTouch (Format Tablet) protocol and registers it as
+ * an input device.
+ */
+
+static int mtouch_connect(struct serio *serio, struct serio_driver *drv)
+{
+       struct mtouch *mtouch;
+       struct input_dev *input_dev;
+       int err;
+
+       mtouch = kzalloc(sizeof(struct mtouch), GFP_KERNEL);
+       input_dev = input_allocate_device();
+       if (!mtouch || !input_dev) {
+               err = -ENOMEM;
+               goto fail1;
+       }
+
+       mtouch->serio = serio;
+       mtouch->dev = input_dev;
+       snprintf(mtouch->phys, sizeof(mtouch->phys), "%s/input0", serio->phys);
+
+       input_dev->name = "MicroTouch Serial TouchScreen";
+       input_dev->phys = mtouch->phys;
+       input_dev->id.bustype = BUS_RS232;
+       input_dev->id.vendor = SERIO_MICROTOUCH;
+       input_dev->id.product = 0;
+       input_dev->id.version = 0x0100;
+       input_dev->dev.parent = &serio->dev;
+       input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+       input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+       input_set_abs_params(mtouch->dev, ABS_X, MTOUCH_MIN_XC, MTOUCH_MAX_XC, 0, 0);
+       input_set_abs_params(mtouch->dev, ABS_Y, MTOUCH_MIN_YC, MTOUCH_MAX_YC, 0, 0);
+
+       serio_set_drvdata(serio, mtouch);
+
+       err = serio_open(serio, drv);
+       if (err)
+               goto fail2;
+
+       err = input_register_device(mtouch->dev);
+       if (err)
+               goto fail3;
+
+       return 0;
+
+ fail3:        serio_close(serio);
+ fail2:        serio_set_drvdata(serio, NULL);
+ fail1:        input_free_device(input_dev);
+       kfree(mtouch);
+       return err;
+}
+
+/*
+ * The serio driver structure.
+ */
+
+static struct serio_device_id mtouch_serio_ids[] = {
+       {
+               .type   = SERIO_RS232,
+               .proto  = SERIO_MICROTOUCH,
+               .id     = SERIO_ANY,
+               .extra  = SERIO_ANY,
+       },
+       { 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, mtouch_serio_ids);
+
+static struct serio_driver mtouch_drv = {
+       .driver         = {
+               .name   = "mtouch",
+       },
+       .description    = DRIVER_DESC,
+       .id_table       = mtouch_serio_ids,
+       .interrupt      = mtouch_interrupt,
+       .connect        = mtouch_connect,
+       .disconnect     = mtouch_disconnect,
+};
+
+module_serio_driver(mtouch_drv);