if INPUT_TOUCHSCREEN
-config OF_TOUCHSCREEN
+config TOUCHSCREEN_PROPERTIES
def_tristate INPUT
- depends on INPUT && OF
+ depends on INPUT
config TOUCHSCREEN_88PM860X
tristate "Marvell 88PM860x touchscreen"
config TOUCHSCREEN_AUO_PIXCIR
tristate "AUO in-cell touchscreen using Pixcir ICs"
depends on I2C
- depends on GPIOLIB
+ depends on GPIOLIB || COMPILE_TEST
help
Say Y here if you have a AUO display with in-cell touchscreen
using Pixcir ICs.
config TOUCHSCREEN_CHIPONE_ICN8318
tristate "chipone icn8318 touchscreen controller"
- depends on GPIOLIB
+ depends on GPIOLIB || COMPILE_TEST
depends on I2C
depends on OF
help
config TOUCHSCREEN_CY8CTMG110
tristate "cy8ctmg110 touchscreen"
depends on I2C
- depends on GPIOLIB
+ depends on GPIOLIB || COMPILE_TEST
help
Say Y here if you have a cy8ctmg110 capacitive touchscreen on
an AAVA device.
To compile this driver as a module, choose M here: the
module will be called egalax_ts.
+config TOUCHSCREEN_FT6236
+ tristate "FT6236 I2C touchscreen"
+ depends on I2C
+ depends on GPIOLIB || COMPILE_TEST
+ help
+ Say Y here to enable support for the I2C connected FT6x06 and
+ FT6x36 family of capacitive touchscreen drivers.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ft6236.
+
config TOUCHSCREEN_FUJITSU
tristate "Fujitsu serial touchscreen"
select SERIO
To compile this driver as a module, choose M here: the
module will be called mtouch.
+config TOUCHSCREEN_IMX6UL_TSC
+ tristate "Freescale i.MX6UL touchscreen controller"
+ depends on (OF && GPIOLIB) || COMPILE_TEST
+ help
+ Say Y here if you have a Freescale i.MX6UL, and want to
+ use the internal touchscreen controller.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imx6ul_tsc.
+
config TOUCHSCREEN_INEXIO
tristate "iNexio serial touchscreens"
select SERIO
To compile this driver as a module, choose M here: the
module will be called pixcir_i2c_ts.
+config TOUCHSCREEN_WDT87XX_I2C
+ tristate "Weida HiTech I2C touchscreen"
+ depends on I2C
+ help
+ Say Y here if you have a Weida WDT87XX I2C touchscreen
+ connected to your system.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called wdt87xx_i2c.
+
config TOUCHSCREEN_WM831X
tristate "Support for WM831x touchscreen controllers"
depends on MFD_WM831X
To compile this driver as a module, choose M here: the
module will be called tsc40.
+config TOUCHSCREEN_TSC200X_CORE
+ tristate
+
+config TOUCHSCREEN_TSC2004
+ tristate "TSC2004 based touchscreens"
+ depends on I2C
+ select REGMAP_I2C
+ select TOUCHSCREEN_TSC200X_CORE
+ help
+ Say Y here if you have a TSC2004 based touchscreen.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tsc2004.
+
config TOUCHSCREEN_TSC2005
- tristate "TSC2005 based touchscreens"
- depends on SPI_MASTER
- help
- Say Y here if you have a TSC2005 based touchscreen.
+ tristate "TSC2005 based touchscreens"
+ depends on SPI_MASTER
+ select REGMAP_SPI
+ select TOUCHSCREEN_TSC200X_CORE
+ help
+ Say Y here if you have a TSC2005 based touchscreen.
If unsure, say N.
config TOUCHSCREEN_STMPE
tristate "STMicroelectronics STMPE touchscreens"
depends on MFD_STMPE
+ depends on (OF || COMPILE_TEST)
help
Say Y here if you want support for STMicroelectronics
STMPE touchscreen controllers.
config TOUCHSCREEN_SUR40
tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
- depends on USB
- depends on MEDIA_USB_SUPPORT
+ depends on USB && MEDIA_USB_SUPPORT && HAS_DMA
+ depends on VIDEO_V4L2
select INPUT_POLLDEV
select VIDEOBUF2_DMA_SG
help
config TOUCHSCREEN_ZFORCE
tristate "Neonode zForce infrared touchscreens"
depends on I2C
- depends on GPIOLIB
+ depends on GPIOLIB || COMPILE_TEST
help
Say Y here if you have a touchscreen using the zforce
infraread technology from Neonode.
To compile this driver as a module, choose M here: the
module will be called zforce_ts.
+config TOUCHSCREEN_COLIBRI_VF50
+ tristate "Toradex Colibri on board touchscreen driver"
+ depends on GPIOLIB && IIO && VF610_ADC
+ help
+ Say Y here if you have a Colibri VF50 and plan to use
+ the on-board provided 4-wire touchscreen driver.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called colibri_vf50_ts.
+
+config TOUCHSCREEN_ROHM_BU21023
+ tristate "ROHM BU21023/24 Dual touch support resistive touchscreens"
+ depends on I2C
+ help
+ Say Y here if you have a touchscreen using ROHM BU21023/24.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bu21023_ts.
+
endif