Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / input / mouse / alps.h
diff --git a/kernel/drivers/input/mouse/alps.h b/kernel/drivers/input/mouse/alps.h
new file mode 100644 (file)
index 0000000..6dfdccc
--- /dev/null
@@ -0,0 +1,303 @@
+/*
+ * ALPS touchpad PS/2 mouse driver
+ *
+ * Copyright (c) 2003 Peter Osterlund <petero2@telia.com>
+ * Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef _ALPS_H
+#define _ALPS_H
+
+#include <linux/input/mt.h>
+
+#define ALPS_PROTO_V1          0x100
+#define ALPS_PROTO_V2          0x200
+#define ALPS_PROTO_V3          0x300
+#define ALPS_PROTO_V3_RUSHMORE 0x310
+#define ALPS_PROTO_V4          0x400
+#define ALPS_PROTO_V5          0x500
+#define ALPS_PROTO_V6          0x600
+#define ALPS_PROTO_V7          0x700   /* t3btl t4s */
+#define ALPS_PROTO_V8          0x800   /* SS4btl SS4s */
+
+#define MAX_TOUCHES    4
+
+#define DOLPHIN_COUNT_PER_ELECTRODE    64
+#define DOLPHIN_PROFILE_XOFFSET                8       /* x-electrode offset */
+#define DOLPHIN_PROFILE_YOFFSET                1       /* y-electrode offset */
+
+/*
+ * enum SS4_PACKET_ID - defines the packet type for V8
+ * SS4_PACKET_ID_IDLE: There's no finger and no button activity.
+ * SS4_PACKET_ID_ONE: There's one finger on touchpad
+ *  or there's button activities.
+ * SS4_PACKET_ID_TWO: There's two or more fingers on touchpad
+ * SS4_PACKET_ID_MULTI: There's three or more fingers on touchpad
+*/
+enum SS4_PACKET_ID {
+       SS4_PACKET_ID_IDLE = 0,
+       SS4_PACKET_ID_ONE,
+       SS4_PACKET_ID_TWO,
+       SS4_PACKET_ID_MULTI,
+};
+
+#define SS4_COUNT_PER_ELECTRODE                256
+#define SS4_NUMSENSOR_XOFFSET          7
+#define SS4_NUMSENSOR_YOFFSET          7
+#define SS4_MIN_PITCH_MM               50
+
+#define SS4_MASK_NORMAL_BUTTONS                0x07
+
+#define SS4_1F_X_V2(_b)                ((_b[0] & 0x0007) |             \
+                                ((_b[1] << 3) & 0x0078) |      \
+                                ((_b[1] << 2) & 0x0380) |      \
+                                ((_b[2] << 5) & 0x1C00)        \
+                               )
+
+#define SS4_1F_Y_V2(_b)                (((_b[2]) & 0x000F) |           \
+                                ((_b[3] >> 2) & 0x0030) |      \
+                                ((_b[4] << 6) & 0x03C0) |      \
+                                ((_b[4] << 5) & 0x0C00)        \
+                               )
+
+#define SS4_1F_Z_V2(_b)                (((_b[5]) & 0x0F) |             \
+                                ((_b[5] >> 1) & 0x70) |        \
+                                ((_b[4]) & 0x80)               \
+                               )
+
+#define SS4_1F_LFB_V2(_b)      (((_b[2] >> 4) & 0x01) == 0x01)
+
+#define SS4_MF_LF_V2(_b, _i)   ((_b[1 + (_i) * 3] & 0x0004) == 0x0004)
+
+#define SS4_BTN_V2(_b)         ((_b[0] >> 5) & SS4_MASK_NORMAL_BUTTONS)
+
+#define SS4_STD_MF_X_V2(_b, _i)        (((_b[0 + (_i) * 3] << 5) & 0x00E0) |   \
+                                ((_b[1 + _i * 3]  << 5) & 0x1F00)      \
+                               )
+
+#define SS4_STD_MF_Y_V2(_b, _i)        (((_b[1 + (_i) * 3] << 3) & 0x0010) |   \
+                                ((_b[2 + (_i) * 3] << 5) & 0x01E0) |   \
+                                ((_b[2 + (_i) * 3] << 4) & 0x0E00)     \
+                               )
+
+#define SS4_BTL_MF_X_V2(_b, _i)        (SS4_STD_MF_X_V2(_b, _i) |              \
+                                ((_b[0 + (_i) * 3] >> 3) & 0x0010)     \
+                               )
+
+#define SS4_BTL_MF_Y_V2(_b, _i)        (SS4_STD_MF_Y_V2(_b, _i) | \
+                                ((_b[0 + (_i) * 3] >> 3) & 0x0008)     \
+                               )
+
+#define SS4_MF_Z_V2(_b, _i)    (((_b[1 + (_i) * 3]) & 0x0001) |        \
+                                ((_b[1 + (_i) * 3] >> 1) & 0x0002)     \
+                               )
+
+#define SS4_IS_MF_CONTINUE(_b) ((_b[2] & 0x10) == 0x10)
+#define SS4_IS_5F_DETECTED(_b) ((_b[2] & 0x10) == 0x10)
+
+
+#define SS4_MFPACKET_NO_AX     8160    /* X-Coordinate value */
+#define SS4_MFPACKET_NO_AY     4080    /* Y-Coordinate value */
+#define SS4_MFPACKET_NO_AX_BL  8176    /* Buttonless X-Coordinate value */
+#define SS4_MFPACKET_NO_AY_BL  4088    /* Buttonless Y-Coordinate value */
+
+/*
+ * enum V7_PACKET_ID - defines the packet type for V7
+ * V7_PACKET_ID_IDLE: There's no finger and no button activity.
+ * V7_PACKET_ID_TWO: There's one or two non-resting fingers on touchpad
+ *  or there's button activities.
+ * V7_PACKET_ID_MULTI: There are at least three non-resting fingers.
+ * V7_PACKET_ID_NEW: The finger position in slot is not continues from
+ *  previous packet.
+*/
+enum V7_PACKET_ID {
+        V7_PACKET_ID_IDLE,
+        V7_PACKET_ID_TWO,
+        V7_PACKET_ID_MULTI,
+        V7_PACKET_ID_NEW,
+        V7_PACKET_ID_UNKNOWN,
+};
+
+/**
+ * struct alps_protocol_info - information about protocol used by a device
+ * @version: Indicates V1/V2/V3/...
+ * @byte0: Helps figure out whether a position report packet matches the
+ *   known format for this model.  The first byte of the report, ANDed with
+ *   mask0, should match byte0.
+ * @mask0: The mask used to check the first byte of the report.
+ * @flags: Additional device capabilities (passthrough port, trackstick, etc.).
+ */
+struct alps_protocol_info {
+       u16 version;
+       u8 byte0, mask0;
+       unsigned int flags;
+};
+
+/**
+ * struct alps_model_info - touchpad ID table
+ * @signature: E7 response string to match.
+ * @command_mode_resp: For V3/V4 touchpads, the final byte of the EC response
+ *   (aka command mode response) identifies the firmware minor version.  This
+ *   can be used to distinguish different hardware models which are not
+ *   uniquely identifiable through their E7 responses.
+ * @protocol_info: information about protcol used by the device.
+ *
+ * Many (but not all) ALPS touchpads can be identified by looking at the
+ * values returned in the "E7 report" and/or the "EC report."  This table
+ * lists a number of such touchpads.
+ */
+struct alps_model_info {
+       u8 signature[3];
+       u8 command_mode_resp;
+       struct alps_protocol_info protocol_info;
+};
+
+/**
+ * struct alps_nibble_commands - encodings for register accesses
+ * @command: PS/2 command used for the nibble
+ * @data: Data supplied as an argument to the PS/2 command, if applicable
+ *
+ * The ALPS protocol uses magic sequences to transmit binary data to the
+ * touchpad, as it is generally not OK to send arbitrary bytes out the
+ * PS/2 port.  Each of the sequences in this table sends one nibble of the
+ * register address or (write) data.  Different versions of the ALPS protocol
+ * use slightly different encodings.
+ */
+struct alps_nibble_commands {
+       int command;
+       unsigned char data;
+};
+
+struct alps_bitmap_point {
+       int start_bit;
+       int num_bits;
+};
+
+/**
+ * struct alps_fields - decoded version of the report packet
+ * @x_map: Bitmap of active X positions for MT.
+ * @y_map: Bitmap of active Y positions for MT.
+ * @fingers: Number of fingers for MT.
+ * @pressure: Pressure.
+ * @st: position for ST.
+ * @mt: position for MT.
+ * @first_mp: Packet is the first of a multi-packet report.
+ * @is_mp: Packet is part of a multi-packet report.
+ * @left: Left touchpad button is active.
+ * @right: Right touchpad button is active.
+ * @middle: Middle touchpad button is active.
+ * @ts_left: Left trackstick button is active.
+ * @ts_right: Right trackstick button is active.
+ * @ts_middle: Middle trackstick button is active.
+ */
+struct alps_fields {
+       unsigned int x_map;
+       unsigned int y_map;
+       unsigned int fingers;
+
+       int pressure;
+       struct input_mt_pos st;
+       struct input_mt_pos mt[MAX_TOUCHES];
+
+       unsigned int first_mp:1;
+       unsigned int is_mp:1;
+
+       unsigned int left:1;
+       unsigned int right:1;
+       unsigned int middle:1;
+
+       unsigned int ts_left:1;
+       unsigned int ts_right:1;
+       unsigned int ts_middle:1;
+};
+
+/**
+ * struct alps_data - private data structure for the ALPS driver
+ * @psmouse: Pointer to parent psmouse device
+ * @dev2: Trackstick device (can be NULL).
+ * @dev3: Generic PS/2 mouse (can be NULL, delayed registering).
+ * @phys2: Physical path for the trackstick device.
+ * @phys3: Physical path for the generic PS/2 mouse.
+ * @dev3_register_work: Delayed work for registering PS/2 mouse.
+ * @nibble_commands: Command mapping used for touchpad register accesses.
+ * @addr_command: Command used to tell the touchpad that a register address
+ *   follows.
+ * @proto_version: Indicates V1/V2/V3/...
+ * @byte0: Helps figure out whether a position report packet matches the
+ *   known format for this model.  The first byte of the report, ANDed with
+ *   mask0, should match byte0.
+ * @mask0: The mask used to check the first byte of the report.
+ * @fw_ver: cached copy of firmware version (EC report)
+ * @flags: Additional device capabilities (passthrough port, trackstick, etc.).
+ * @x_max: Largest possible X position value.
+ * @y_max: Largest possible Y position value.
+ * @x_bits: Number of X bits in the MT bitmap.
+ * @y_bits: Number of Y bits in the MT bitmap.
+ * @hw_init: Protocol-specific hardware init function.
+ * @process_packet: Protocol-specific function to process a report packet.
+ * @decode_fields: Protocol-specific function to read packet bitfields.
+ * @set_abs_params: Protocol-specific function to configure the input_dev.
+ * @prev_fin: Finger bit from previous packet.
+ * @multi_packet: Multi-packet data in progress.
+ * @multi_data: Saved multi-packet data.
+ * @f: Decoded packet data fields.
+ * @quirks: Bitmap of ALPS_QUIRK_*.
+ * @timer: Timer for flushing out the final report packet in the stream.
+ */
+struct alps_data {
+       struct psmouse *psmouse;
+       struct input_dev *dev2;
+       struct input_dev *dev3;
+       char phys2[32];
+       char phys3[32];
+       struct delayed_work dev3_register_work;
+
+       /* these are autodetected when the device is identified */
+       const struct alps_nibble_commands *nibble_commands;
+       int addr_command;
+       u16 proto_version;
+       u8 byte0, mask0;
+       u8 fw_ver[3];
+       int flags;
+       int x_max;
+       int y_max;
+       int x_bits;
+       int y_bits;
+       unsigned int x_res;
+       unsigned int y_res;
+
+       int (*hw_init)(struct psmouse *psmouse);
+       void (*process_packet)(struct psmouse *psmouse);
+       int (*decode_fields)(struct alps_fields *f, unsigned char *p,
+                             struct psmouse *psmouse);
+       void (*set_abs_params)(struct alps_data *priv, struct input_dev *dev1);
+
+       int prev_fin;
+       int multi_packet;
+       unsigned char multi_data[6];
+       struct alps_fields f;
+       u8 quirks;
+       struct timer_list timer;
+};
+
+#define ALPS_QUIRK_TRACKSTICK_BUTTONS  1 /* trakcstick buttons in trackstick packet */
+
+#ifdef CONFIG_MOUSE_PS2_ALPS
+int alps_detect(struct psmouse *psmouse, bool set_properties);
+int alps_init(struct psmouse *psmouse);
+#else
+inline int alps_detect(struct psmouse *psmouse, bool set_properties)
+{
+       return -ENOSYS;
+}
+inline int alps_init(struct psmouse *psmouse)
+{
+       return -ENOSYS;
+}
+#endif /* CONFIG_MOUSE_PS2_ALPS */
+
+#endif