--- /dev/null
+/*
+ * ati_remote2 - ATI/Philips USB RF remote driver
+ *
+ * Copyright (C) 2005-2008 Ville Syrjala <syrjala@sci.fi>
+ * Copyright (C) 2007-2008 Peter Stokes <linux@dadeos.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ */
+
+#include <linux/usb/input.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+
+#define DRIVER_DESC "ATI/Philips USB RF remote driver"
+#define DRIVER_VERSION "0.3"
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_AUTHOR("Ville Syrjala <syrjala@sci.fi>");
+MODULE_LICENSE("GPL");
+
+/*
+ * ATI Remote Wonder II Channel Configuration
+ *
+ * The remote control can by assigned one of sixteen "channels" in order to facilitate
+ * the use of multiple remote controls within range of each other.
+ * A remote's "channel" may be altered by pressing and holding the "PC" button for
+ * approximately 3 seconds, after which the button will slowly flash the count of the
+ * currently configured "channel", using the numeric keypad enter a number between 1 and
+ * 16 and then press the "PC" button again, the button will slowly flash the count of the
+ * newly configured "channel".
+ */
+
+enum {
+ ATI_REMOTE2_MAX_CHANNEL_MASK = 0xFFFF,
+ ATI_REMOTE2_MAX_MODE_MASK = 0x1F,
+};
+
+static int ati_remote2_set_mask(const char *val,
+ const struct kernel_param *kp,
+ unsigned int max)
+{
+ unsigned int mask;
+ int ret;
+
+ if (!val)
+ return -EINVAL;
+
+ ret = kstrtouint(val, 0, &mask);
+ if (ret)
+ return ret;
+
+ if (mask & ~max)
+ return -EINVAL;
+
+ *(unsigned int *)kp->arg = mask;
+
+ return 0;
+}
+
+static int ati_remote2_set_channel_mask(const char *val,
+ const struct kernel_param *kp)
+{
+ pr_debug("%s()\n", __func__);
+
+ return ati_remote2_set_mask(val, kp, ATI_REMOTE2_MAX_CHANNEL_MASK);
+}
+
+static int ati_remote2_get_channel_mask(char *buffer,
+ const struct kernel_param *kp)
+{
+ pr_debug("%s()\n", __func__);
+
+ return sprintf(buffer, "0x%04x", *(unsigned int *)kp->arg);
+}
+
+static int ati_remote2_set_mode_mask(const char *val,
+ const struct kernel_param *kp)
+{
+ pr_debug("%s()\n", __func__);
+
+ return ati_remote2_set_mask(val, kp, ATI_REMOTE2_MAX_MODE_MASK);
+}
+
+static int ati_remote2_get_mode_mask(char *buffer,
+ const struct kernel_param *kp)
+{
+ pr_debug("%s()\n", __func__);
+
+ return sprintf(buffer, "0x%02x", *(unsigned int *)kp->arg);
+}
+
+static unsigned int channel_mask = ATI_REMOTE2_MAX_CHANNEL_MASK;
+#define param_check_channel_mask(name, p) __param_check(name, p, unsigned int)
+static struct kernel_param_ops param_ops_channel_mask = {
+ .set = ati_remote2_set_channel_mask,
+ .get = ati_remote2_get_channel_mask,
+};
+module_param(channel_mask, channel_mask, 0644);
+MODULE_PARM_DESC(channel_mask, "Bitmask of channels to accept <15:Channel16>...<1:Channel2><0:Channel1>");
+
+static unsigned int mode_mask = ATI_REMOTE2_MAX_MODE_MASK;
+#define param_check_mode_mask(name, p) __param_check(name, p, unsigned int)
+static struct kernel_param_ops param_ops_mode_mask = {
+ .set = ati_remote2_set_mode_mask,
+ .get = ati_remote2_get_mode_mask,
+};
+module_param(mode_mask, mode_mask, 0644);
+MODULE_PARM_DESC(mode_mask, "Bitmask of modes to accept <4:PC><3:AUX4><2:AUX3><1:AUX2><0:AUX1>");
+
+static struct usb_device_id ati_remote2_id_table[] = {
+ { USB_DEVICE(0x0471, 0x0602) }, /* ATI Remote Wonder II */
+ { }
+};
+MODULE_DEVICE_TABLE(usb, ati_remote2_id_table);
+
+static DEFINE_MUTEX(ati_remote2_mutex);
+
+enum {
+ ATI_REMOTE2_OPENED = 0x1,
+ ATI_REMOTE2_SUSPENDED = 0x2,
+};
+
+enum {
+ ATI_REMOTE2_AUX1,
+ ATI_REMOTE2_AUX2,
+ ATI_REMOTE2_AUX3,
+ ATI_REMOTE2_AUX4,
+ ATI_REMOTE2_PC,
+ ATI_REMOTE2_MODES,
+};
+
+static const struct {
+ u8 hw_code;
+ u16 keycode;
+} ati_remote2_key_table[] = {
+ { 0x00, KEY_0 },
+ { 0x01, KEY_1 },
+ { 0x02, KEY_2 },
+ { 0x03, KEY_3 },
+ { 0x04, KEY_4 },
+ { 0x05, KEY_5 },
+ { 0x06, KEY_6 },
+ { 0x07, KEY_7 },
+ { 0x08, KEY_8 },
+ { 0x09, KEY_9 },
+ { 0x0c, KEY_POWER },
+ { 0x0d, KEY_MUTE },
+ { 0x10, KEY_VOLUMEUP },
+ { 0x11, KEY_VOLUMEDOWN },
+ { 0x20, KEY_CHANNELUP },
+ { 0x21, KEY_CHANNELDOWN },
+ { 0x28, KEY_FORWARD },
+ { 0x29, KEY_REWIND },
+ { 0x2c, KEY_PLAY },
+ { 0x30, KEY_PAUSE },
+ { 0x31, KEY_STOP },
+ { 0x37, KEY_RECORD },
+ { 0x38, KEY_DVD },
+ { 0x39, KEY_TV },
+ { 0x3f, KEY_PROG1 }, /* AUX1-AUX4 and PC */
+ { 0x54, KEY_MENU },
+ { 0x58, KEY_UP },
+ { 0x59, KEY_DOWN },
+ { 0x5a, KEY_LEFT },
+ { 0x5b, KEY_RIGHT },
+ { 0x5c, KEY_OK },
+ { 0x78, KEY_A },
+ { 0x79, KEY_B },
+ { 0x7a, KEY_C },
+ { 0x7b, KEY_D },
+ { 0x7c, KEY_E },
+ { 0x7d, KEY_F },
+ { 0x82, KEY_ENTER },
+ { 0x8e, KEY_VENDOR },
+ { 0x96, KEY_COFFEE },
+ { 0xa9, BTN_LEFT },
+ { 0xaa, BTN_RIGHT },
+ { 0xbe, KEY_QUESTION },
+ { 0xd0, KEY_EDIT },
+ { 0xd5, KEY_FRONT },
+ { 0xf9, KEY_INFO },
+};
+
+struct ati_remote2 {
+ struct input_dev *idev;
+ struct usb_device *udev;
+
+ struct usb_interface *intf[2];
+ struct usb_endpoint_descriptor *ep[2];
+ struct urb *urb[2];
+ void *buf[2];
+ dma_addr_t buf_dma[2];
+
+ unsigned long jiffies;
+ int mode;
+
+ char name[64];
+ char phys[64];
+
+ /* Each mode (AUX1-AUX4 and PC) can have an independent keymap. */
+ u16 keycode[ATI_REMOTE2_MODES][ARRAY_SIZE(ati_remote2_key_table)];
+
+ unsigned int flags;
+
+ unsigned int channel_mask;
+ unsigned int mode_mask;
+};
+
+static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id);
+static void ati_remote2_disconnect(struct usb_interface *interface);
+static int ati_remote2_suspend(struct usb_interface *interface, pm_message_t message);
+static int ati_remote2_resume(struct usb_interface *interface);
+static int ati_remote2_reset_resume(struct usb_interface *interface);
+static int ati_remote2_pre_reset(struct usb_interface *interface);
+static int ati_remote2_post_reset(struct usb_interface *interface);
+
+static struct usb_driver ati_remote2_driver = {
+ .name = "ati_remote2",
+ .probe = ati_remote2_probe,
+ .disconnect = ati_remote2_disconnect,
+ .id_table = ati_remote2_id_table,
+ .suspend = ati_remote2_suspend,
+ .resume = ati_remote2_resume,
+ .reset_resume = ati_remote2_reset_resume,
+ .pre_reset = ati_remote2_pre_reset,
+ .post_reset = ati_remote2_post_reset,
+ .supports_autosuspend = 1,
+};
+
+static int ati_remote2_submit_urbs(struct ati_remote2 *ar2)
+{
+ int r;
+
+ r = usb_submit_urb(ar2->urb[0], GFP_KERNEL);
+ if (r) {
+ dev_err(&ar2->intf[0]->dev,
+ "%s(): usb_submit_urb() = %d\n", __func__, r);
+ return r;
+ }
+ r = usb_submit_urb(ar2->urb[1], GFP_KERNEL);
+ if (r) {
+ usb_kill_urb(ar2->urb[0]);
+ dev_err(&ar2->intf[1]->dev,
+ "%s(): usb_submit_urb() = %d\n", __func__, r);
+ return r;
+ }
+
+ return 0;
+}
+
+static void ati_remote2_kill_urbs(struct ati_remote2 *ar2)
+{
+ usb_kill_urb(ar2->urb[1]);
+ usb_kill_urb(ar2->urb[0]);
+}
+
+static int ati_remote2_open(struct input_dev *idev)
+{
+ struct ati_remote2 *ar2 = input_get_drvdata(idev);
+ int r;
+
+ dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
+
+ r = usb_autopm_get_interface(ar2->intf[0]);
+ if (r) {
+ dev_err(&ar2->intf[0]->dev,
+ "%s(): usb_autopm_get_interface() = %d\n", __func__, r);
+ goto fail1;
+ }
+
+ mutex_lock(&ati_remote2_mutex);
+
+ if (!(ar2->flags & ATI_REMOTE2_SUSPENDED)) {
+ r = ati_remote2_submit_urbs(ar2);
+ if (r)
+ goto fail2;
+ }
+
+ ar2->flags |= ATI_REMOTE2_OPENED;
+
+ mutex_unlock(&ati_remote2_mutex);
+
+ usb_autopm_put_interface(ar2->intf[0]);
+
+ return 0;
+
+ fail2:
+ mutex_unlock(&ati_remote2_mutex);
+ usb_autopm_put_interface(ar2->intf[0]);
+ fail1:
+ return r;
+}
+
+static void ati_remote2_close(struct input_dev *idev)
+{
+ struct ati_remote2 *ar2 = input_get_drvdata(idev);
+
+ dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
+
+ mutex_lock(&ati_remote2_mutex);
+
+ if (!(ar2->flags & ATI_REMOTE2_SUSPENDED))
+ ati_remote2_kill_urbs(ar2);
+
+ ar2->flags &= ~ATI_REMOTE2_OPENED;
+
+ mutex_unlock(&ati_remote2_mutex);
+}
+
+static void ati_remote2_input_mouse(struct ati_remote2 *ar2)
+{
+ struct input_dev *idev = ar2->idev;
+ u8 *data = ar2->buf[0];
+ int channel, mode;
+
+ channel = data[0] >> 4;
+
+ if (!((1 << channel) & ar2->channel_mask))
+ return;
+
+ mode = data[0] & 0x0F;
+
+ if (mode > ATI_REMOTE2_PC) {
+ dev_err(&ar2->intf[0]->dev,
+ "Unknown mode byte (%02x %02x %02x %02x)\n",
+ data[3], data[2], data[1], data[0]);
+ return;
+ }
+
+ if (!((1 << mode) & ar2->mode_mask))
+ return;
+
+ input_event(idev, EV_REL, REL_X, (s8) data[1]);
+ input_event(idev, EV_REL, REL_Y, (s8) data[2]);
+ input_sync(idev);
+}
+
+static int ati_remote2_lookup(unsigned int hw_code)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(ati_remote2_key_table); i++)
+ if (ati_remote2_key_table[i].hw_code == hw_code)
+ return i;
+
+ return -1;
+}
+
+static void ati_remote2_input_key(struct ati_remote2 *ar2)
+{
+ struct input_dev *idev = ar2->idev;
+ u8 *data = ar2->buf[1];
+ int channel, mode, hw_code, index;
+
+ channel = data[0] >> 4;
+
+ if (!((1 << channel) & ar2->channel_mask))
+ return;
+
+ mode = data[0] & 0x0F;
+
+ if (mode > ATI_REMOTE2_PC) {
+ dev_err(&ar2->intf[1]->dev,
+ "Unknown mode byte (%02x %02x %02x %02x)\n",
+ data[3], data[2], data[1], data[0]);
+ return;
+ }
+
+ hw_code = data[2];
+ if (hw_code == 0x3f) {
+ /*
+ * For some incomprehensible reason the mouse pad generates
+ * events which look identical to the events from the last
+ * pressed mode key. Naturally we don't want to generate key
+ * events for the mouse pad so we filter out any subsequent
+ * events from the same mode key.
+ */
+ if (ar2->mode == mode)
+ return;
+
+ if (data[1] == 0)
+ ar2->mode = mode;
+ }
+
+ if (!((1 << mode) & ar2->mode_mask))
+ return;
+
+ index = ati_remote2_lookup(hw_code);
+ if (index < 0) {
+ dev_err(&ar2->intf[1]->dev,
+ "Unknown code byte (%02x %02x %02x %02x)\n",
+ data[3], data[2], data[1], data[0]);
+ return;
+ }
+
+ switch (data[1]) {
+ case 0: /* release */
+ break;
+ case 1: /* press */
+ ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_DELAY]);
+ break;
+ case 2: /* repeat */
+
+ /* No repeat for mouse buttons. */
+ if (ar2->keycode[mode][index] == BTN_LEFT ||
+ ar2->keycode[mode][index] == BTN_RIGHT)
+ return;
+
+ if (!time_after_eq(jiffies, ar2->jiffies))
+ return;
+
+ ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_PERIOD]);
+ break;
+ default:
+ dev_err(&ar2->intf[1]->dev,
+ "Unknown state byte (%02x %02x %02x %02x)\n",
+ data[3], data[2], data[1], data[0]);
+ return;
+ }
+
+ input_event(idev, EV_KEY, ar2->keycode[mode][index], data[1]);
+ input_sync(idev);
+}
+
+static void ati_remote2_complete_mouse(struct urb *urb)
+{
+ struct ati_remote2 *ar2 = urb->context;
+ int r;
+
+ switch (urb->status) {
+ case 0:
+ usb_mark_last_busy(ar2->udev);
+ ati_remote2_input_mouse(ar2);
+ break;
+ case -ENOENT:
+ case -EILSEQ:
+ case -ECONNRESET:
+ case -ESHUTDOWN:
+ dev_dbg(&ar2->intf[0]->dev,
+ "%s(): urb status = %d\n", __func__, urb->status);
+ return;
+ default:
+ usb_mark_last_busy(ar2->udev);
+ dev_err(&ar2->intf[0]->dev,
+ "%s(): urb status = %d\n", __func__, urb->status);
+ }
+
+ r = usb_submit_urb(urb, GFP_ATOMIC);
+ if (r)
+ dev_err(&ar2->intf[0]->dev,
+ "%s(): usb_submit_urb() = %d\n", __func__, r);
+}
+
+static void ati_remote2_complete_key(struct urb *urb)
+{
+ struct ati_remote2 *ar2 = urb->context;
+ int r;
+
+ switch (urb->status) {
+ case 0:
+ usb_mark_last_busy(ar2->udev);
+ ati_remote2_input_key(ar2);
+ break;
+ case -ENOENT:
+ case -EILSEQ:
+ case -ECONNRESET:
+ case -ESHUTDOWN:
+ dev_dbg(&ar2->intf[1]->dev,
+ "%s(): urb status = %d\n", __func__, urb->status);
+ return;
+ default:
+ usb_mark_last_busy(ar2->udev);
+ dev_err(&ar2->intf[1]->dev,
+ "%s(): urb status = %d\n", __func__, urb->status);
+ }
+
+ r = usb_submit_urb(urb, GFP_ATOMIC);
+ if (r)
+ dev_err(&ar2->intf[1]->dev,
+ "%s(): usb_submit_urb() = %d\n", __func__, r);
+}
+
+static int ati_remote2_getkeycode(struct input_dev *idev,
+ struct input_keymap_entry *ke)
+{
+ struct ati_remote2 *ar2 = input_get_drvdata(idev);
+ unsigned int mode;
+ int offset;
+ unsigned int index;
+ unsigned int scancode;
+
+ if (ke->flags & INPUT_KEYMAP_BY_INDEX) {
+ index = ke->index;
+ if (index >= ATI_REMOTE2_MODES *
+ ARRAY_SIZE(ati_remote2_key_table))
+ return -EINVAL;
+
+ mode = ke->index / ARRAY_SIZE(ati_remote2_key_table);
+ offset = ke->index % ARRAY_SIZE(ati_remote2_key_table);
+ scancode = (mode << 8) + ati_remote2_key_table[offset].hw_code;
+ } else {
+ if (input_scancode_to_scalar(ke, &scancode))
+ return -EINVAL;
+
+ mode = scancode >> 8;
+ if (mode > ATI_REMOTE2_PC)
+ return -EINVAL;
+
+ offset = ati_remote2_lookup(scancode & 0xff);
+ if (offset < 0)
+ return -EINVAL;
+
+ index = mode * ARRAY_SIZE(ati_remote2_key_table) + offset;
+ }
+
+ ke->keycode = ar2->keycode[mode][offset];
+ ke->len = sizeof(scancode);
+ memcpy(&ke->scancode, &scancode, sizeof(scancode));
+ ke->index = index;
+
+ return 0;
+}
+
+static int ati_remote2_setkeycode(struct input_dev *idev,
+ const struct input_keymap_entry *ke,
+ unsigned int *old_keycode)
+{
+ struct ati_remote2 *ar2 = input_get_drvdata(idev);
+ unsigned int mode;
+ int offset;
+ unsigned int index;
+ unsigned int scancode;
+
+ if (ke->flags & INPUT_KEYMAP_BY_INDEX) {
+ if (ke->index >= ATI_REMOTE2_MODES *
+ ARRAY_SIZE(ati_remote2_key_table))
+ return -EINVAL;
+
+ mode = ke->index / ARRAY_SIZE(ati_remote2_key_table);
+ offset = ke->index % ARRAY_SIZE(ati_remote2_key_table);
+ } else {
+ if (input_scancode_to_scalar(ke, &scancode))
+ return -EINVAL;
+
+ mode = scancode >> 8;
+ if (mode > ATI_REMOTE2_PC)
+ return -EINVAL;
+
+ offset = ati_remote2_lookup(scancode & 0xff);
+ if (offset < 0)
+ return -EINVAL;
+ }
+
+ *old_keycode = ar2->keycode[mode][offset];
+ ar2->keycode[mode][offset] = ke->keycode;
+ __set_bit(ke->keycode, idev->keybit);
+
+ for (mode = 0; mode < ATI_REMOTE2_MODES; mode++) {
+ for (index = 0; index < ARRAY_SIZE(ati_remote2_key_table); index++) {
+ if (ar2->keycode[mode][index] == *old_keycode)
+ return 0;
+ }
+ }
+
+ __clear_bit(*old_keycode, idev->keybit);
+
+ return 0;
+}
+
+static int ati_remote2_input_init(struct ati_remote2 *ar2)
+{
+ struct input_dev *idev;
+ int index, mode, retval;
+
+ idev = input_allocate_device();
+ if (!idev)
+ return -ENOMEM;
+
+ ar2->idev = idev;
+ input_set_drvdata(idev, ar2);
+
+ idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) | BIT_MASK(EV_REL);
+ idev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_LEFT) |
+ BIT_MASK(BTN_RIGHT);
+ idev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
+
+ for (mode = 0; mode < ATI_REMOTE2_MODES; mode++) {
+ for (index = 0; index < ARRAY_SIZE(ati_remote2_key_table); index++) {
+ ar2->keycode[mode][index] = ati_remote2_key_table[index].keycode;
+ __set_bit(ar2->keycode[mode][index], idev->keybit);
+ }
+ }
+
+ /* AUX1-AUX4 and PC generate the same scancode. */
+ index = ati_remote2_lookup(0x3f);
+ ar2->keycode[ATI_REMOTE2_AUX1][index] = KEY_PROG1;
+ ar2->keycode[ATI_REMOTE2_AUX2][index] = KEY_PROG2;
+ ar2->keycode[ATI_REMOTE2_AUX3][index] = KEY_PROG3;
+ ar2->keycode[ATI_REMOTE2_AUX4][index] = KEY_PROG4;
+ ar2->keycode[ATI_REMOTE2_PC][index] = KEY_PC;
+ __set_bit(KEY_PROG1, idev->keybit);
+ __set_bit(KEY_PROG2, idev->keybit);
+ __set_bit(KEY_PROG3, idev->keybit);
+ __set_bit(KEY_PROG4, idev->keybit);
+ __set_bit(KEY_PC, idev->keybit);
+
+ idev->rep[REP_DELAY] = 250;
+ idev->rep[REP_PERIOD] = 33;
+
+ idev->open = ati_remote2_open;
+ idev->close = ati_remote2_close;
+
+ idev->getkeycode = ati_remote2_getkeycode;
+ idev->setkeycode = ati_remote2_setkeycode;
+
+ idev->name = ar2->name;
+ idev->phys = ar2->phys;
+
+ usb_to_input_id(ar2->udev, &idev->id);
+ idev->dev.parent = &ar2->udev->dev;
+
+ retval = input_register_device(idev);
+ if (retval)
+ input_free_device(idev);
+
+ return retval;
+}
+
+static int ati_remote2_urb_init(struct ati_remote2 *ar2)
+{
+ struct usb_device *udev = ar2->udev;
+ int i, pipe, maxp;
+
+ for (i = 0; i < 2; i++) {
+ ar2->buf[i] = usb_alloc_coherent(udev, 4, GFP_KERNEL, &ar2->buf_dma[i]);
+ if (!ar2->buf[i])
+ return -ENOMEM;
+
+ ar2->urb[i] = usb_alloc_urb(0, GFP_KERNEL);
+ if (!ar2->urb[i])
+ return -ENOMEM;
+
+ pipe = usb_rcvintpipe(udev, ar2->ep[i]->bEndpointAddress);
+ maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
+ maxp = maxp > 4 ? 4 : maxp;
+
+ usb_fill_int_urb(ar2->urb[i], udev, pipe, ar2->buf[i], maxp,
+ i ? ati_remote2_complete_key : ati_remote2_complete_mouse,
+ ar2, ar2->ep[i]->bInterval);
+ ar2->urb[i]->transfer_dma = ar2->buf_dma[i];
+ ar2->urb[i]->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+ }
+
+ return 0;
+}
+
+static void ati_remote2_urb_cleanup(struct ati_remote2 *ar2)
+{
+ int i;
+
+ for (i = 0; i < 2; i++) {
+ usb_free_urb(ar2->urb[i]);
+ usb_free_coherent(ar2->udev, 4, ar2->buf[i], ar2->buf_dma[i]);
+ }
+}
+
+static int ati_remote2_setup(struct ati_remote2 *ar2, unsigned int ch_mask)
+{
+ int r, i, channel;
+
+ /*
+ * Configure receiver to only accept input from remote "channel"
+ * channel == 0 -> Accept input from any remote channel
+ * channel == 1 -> Only accept input from remote channel 1
+ * channel == 2 -> Only accept input from remote channel 2
+ * ...
+ * channel == 16 -> Only accept input from remote channel 16
+ */
+
+ channel = 0;
+ for (i = 0; i < 16; i++) {
+ if ((1 << i) & ch_mask) {
+ if (!(~(1 << i) & ch_mask))
+ channel = i + 1;
+ break;
+ }
+ }
+
+ r = usb_control_msg(ar2->udev, usb_sndctrlpipe(ar2->udev, 0),
+ 0x20,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
+ channel, 0x0, NULL, 0, USB_CTRL_SET_TIMEOUT);
+ if (r) {
+ dev_err(&ar2->udev->dev, "%s - failed to set channel due to error: %d\n",
+ __func__, r);
+ return r;
+ }
+
+ return 0;
+}
+
+static ssize_t ati_remote2_show_channel_mask(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct usb_device *udev = to_usb_device(dev);
+ struct usb_interface *intf = usb_ifnum_to_if(udev, 0);
+ struct ati_remote2 *ar2 = usb_get_intfdata(intf);
+
+ return sprintf(buf, "0x%04x\n", ar2->channel_mask);
+}
+
+static ssize_t ati_remote2_store_channel_mask(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct usb_device *udev = to_usb_device(dev);
+ struct usb_interface *intf = usb_ifnum_to_if(udev, 0);
+ struct ati_remote2 *ar2 = usb_get_intfdata(intf);
+ unsigned int mask;
+ int r;
+
+ r = kstrtouint(buf, 0, &mask);
+ if (r)
+ return r;
+
+ if (mask & ~ATI_REMOTE2_MAX_CHANNEL_MASK)
+ return -EINVAL;
+
+ r = usb_autopm_get_interface(ar2->intf[0]);
+ if (r) {
+ dev_err(&ar2->intf[0]->dev,
+ "%s(): usb_autopm_get_interface() = %d\n", __func__, r);
+ return r;
+ }
+
+ mutex_lock(&ati_remote2_mutex);
+
+ if (mask != ar2->channel_mask) {
+ r = ati_remote2_setup(ar2, mask);
+ if (!r)
+ ar2->channel_mask = mask;
+ }
+
+ mutex_unlock(&ati_remote2_mutex);
+
+ usb_autopm_put_interface(ar2->intf[0]);
+
+ return r ? r : count;
+}
+
+static ssize_t ati_remote2_show_mode_mask(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct usb_device *udev = to_usb_device(dev);
+ struct usb_interface *intf = usb_ifnum_to_if(udev, 0);
+ struct ati_remote2 *ar2 = usb_get_intfdata(intf);
+
+ return sprintf(buf, "0x%02x\n", ar2->mode_mask);
+}
+
+static ssize_t ati_remote2_store_mode_mask(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct usb_device *udev = to_usb_device(dev);
+ struct usb_interface *intf = usb_ifnum_to_if(udev, 0);
+ struct ati_remote2 *ar2 = usb_get_intfdata(intf);
+ unsigned int mask;
+ int err;
+
+ err = kstrtouint(buf, 0, &mask);
+ if (err)
+ return err;
+
+ if (mask & ~ATI_REMOTE2_MAX_MODE_MASK)
+ return -EINVAL;
+
+ ar2->mode_mask = mask;
+
+ return count;
+}
+
+static DEVICE_ATTR(channel_mask, 0644, ati_remote2_show_channel_mask,
+ ati_remote2_store_channel_mask);
+
+static DEVICE_ATTR(mode_mask, 0644, ati_remote2_show_mode_mask,
+ ati_remote2_store_mode_mask);
+
+static struct attribute *ati_remote2_attrs[] = {
+ &dev_attr_channel_mask.attr,
+ &dev_attr_mode_mask.attr,
+ NULL,
+};
+
+static struct attribute_group ati_remote2_attr_group = {
+ .attrs = ati_remote2_attrs,
+};
+
+static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id)
+{
+ struct usb_device *udev = interface_to_usbdev(interface);
+ struct usb_host_interface *alt = interface->cur_altsetting;
+ struct ati_remote2 *ar2;
+ int r;
+
+ if (alt->desc.bInterfaceNumber)
+ return -ENODEV;
+
+ ar2 = kzalloc(sizeof (struct ati_remote2), GFP_KERNEL);
+ if (!ar2)
+ return -ENOMEM;
+
+ ar2->udev = udev;
+
+ ar2->intf[0] = interface;
+ ar2->ep[0] = &alt->endpoint[0].desc;
+
+ ar2->intf[1] = usb_ifnum_to_if(udev, 1);
+ r = usb_driver_claim_interface(&ati_remote2_driver, ar2->intf[1], ar2);
+ if (r)
+ goto fail1;
+ alt = ar2->intf[1]->cur_altsetting;
+ ar2->ep[1] = &alt->endpoint[0].desc;
+
+ r = ati_remote2_urb_init(ar2);
+ if (r)
+ goto fail2;
+
+ ar2->channel_mask = channel_mask;
+ ar2->mode_mask = mode_mask;
+
+ r = ati_remote2_setup(ar2, ar2->channel_mask);
+ if (r)
+ goto fail2;
+
+ usb_make_path(udev, ar2->phys, sizeof(ar2->phys));
+ strlcat(ar2->phys, "/input0", sizeof(ar2->phys));
+
+ strlcat(ar2->name, "ATI Remote Wonder II", sizeof(ar2->name));
+
+ r = sysfs_create_group(&udev->dev.kobj, &ati_remote2_attr_group);
+ if (r)
+ goto fail2;
+
+ r = ati_remote2_input_init(ar2);
+ if (r)
+ goto fail3;
+
+ usb_set_intfdata(interface, ar2);
+
+ interface->needs_remote_wakeup = 1;
+
+ return 0;
+
+ fail3:
+ sysfs_remove_group(&udev->dev.kobj, &ati_remote2_attr_group);
+ fail2:
+ ati_remote2_urb_cleanup(ar2);
+ usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]);
+ fail1:
+ kfree(ar2);
+
+ return r;
+}
+
+static void ati_remote2_disconnect(struct usb_interface *interface)
+{
+ struct ati_remote2 *ar2;
+ struct usb_host_interface *alt = interface->cur_altsetting;
+
+ if (alt->desc.bInterfaceNumber)
+ return;
+
+ ar2 = usb_get_intfdata(interface);
+ usb_set_intfdata(interface, NULL);
+
+ input_unregister_device(ar2->idev);
+
+ sysfs_remove_group(&ar2->udev->dev.kobj, &ati_remote2_attr_group);
+
+ ati_remote2_urb_cleanup(ar2);
+
+ usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]);
+
+ kfree(ar2);
+}
+
+static int ati_remote2_suspend(struct usb_interface *interface,
+ pm_message_t message)
+{
+ struct ati_remote2 *ar2;
+ struct usb_host_interface *alt = interface->cur_altsetting;
+
+ if (alt->desc.bInterfaceNumber)
+ return 0;
+
+ ar2 = usb_get_intfdata(interface);
+
+ dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
+
+ mutex_lock(&ati_remote2_mutex);
+
+ if (ar2->flags & ATI_REMOTE2_OPENED)
+ ati_remote2_kill_urbs(ar2);
+
+ ar2->flags |= ATI_REMOTE2_SUSPENDED;
+
+ mutex_unlock(&ati_remote2_mutex);
+
+ return 0;
+}
+
+static int ati_remote2_resume(struct usb_interface *interface)
+{
+ struct ati_remote2 *ar2;
+ struct usb_host_interface *alt = interface->cur_altsetting;
+ int r = 0;
+
+ if (alt->desc.bInterfaceNumber)
+ return 0;
+
+ ar2 = usb_get_intfdata(interface);
+
+ dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
+
+ mutex_lock(&ati_remote2_mutex);
+
+ if (ar2->flags & ATI_REMOTE2_OPENED)
+ r = ati_remote2_submit_urbs(ar2);
+
+ if (!r)
+ ar2->flags &= ~ATI_REMOTE2_SUSPENDED;
+
+ mutex_unlock(&ati_remote2_mutex);
+
+ return r;
+}
+
+static int ati_remote2_reset_resume(struct usb_interface *interface)
+{
+ struct ati_remote2 *ar2;
+ struct usb_host_interface *alt = interface->cur_altsetting;
+ int r = 0;
+
+ if (alt->desc.bInterfaceNumber)
+ return 0;
+
+ ar2 = usb_get_intfdata(interface);
+
+ dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
+
+ mutex_lock(&ati_remote2_mutex);
+
+ r = ati_remote2_setup(ar2, ar2->channel_mask);
+ if (r)
+ goto out;
+
+ if (ar2->flags & ATI_REMOTE2_OPENED)
+ r = ati_remote2_submit_urbs(ar2);
+
+ if (!r)
+ ar2->flags &= ~ATI_REMOTE2_SUSPENDED;
+
+ out:
+ mutex_unlock(&ati_remote2_mutex);
+
+ return r;
+}
+
+static int ati_remote2_pre_reset(struct usb_interface *interface)
+{
+ struct ati_remote2 *ar2;
+ struct usb_host_interface *alt = interface->cur_altsetting;
+
+ if (alt->desc.bInterfaceNumber)
+ return 0;
+
+ ar2 = usb_get_intfdata(interface);
+
+ dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
+
+ mutex_lock(&ati_remote2_mutex);
+
+ if (ar2->flags == ATI_REMOTE2_OPENED)
+ ati_remote2_kill_urbs(ar2);
+
+ return 0;
+}
+
+static int ati_remote2_post_reset(struct usb_interface *interface)
+{
+ struct ati_remote2 *ar2;
+ struct usb_host_interface *alt = interface->cur_altsetting;
+ int r = 0;
+
+ if (alt->desc.bInterfaceNumber)
+ return 0;
+
+ ar2 = usb_get_intfdata(interface);
+
+ dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
+
+ if (ar2->flags == ATI_REMOTE2_OPENED)
+ r = ati_remote2_submit_urbs(ar2);
+
+ mutex_unlock(&ati_remote2_mutex);
+
+ return r;
+}
+
+module_usb_driver(ati_remote2_driver);
Code Review / kvmfornfv.git / blobdiff