--- /dev/null
+#
+# Input core configuration
+#
+menuconfig INPUT_KEYBOARD
+ bool "Keyboards"
+ default y
+ help
+ Say Y here, and a list of supported keyboards will be displayed.
+ This option doesn't affect the kernel.
+
+ If unsure, say Y.
+
+if INPUT_KEYBOARD
+
+config KEYBOARD_ADP5520
+ tristate "Keypad Support for ADP5520 PMIC"
+ depends on PMIC_ADP5520
+ help
+ This option enables support for the keypad scan matrix
+ on Analog Devices ADP5520 PMICs.
+
+ To compile this driver as a module, choose M here: the module will
+ be called adp5520-keys.
+
+config KEYBOARD_ADP5588
+ tristate "ADP5588/87 I2C QWERTY Keypad and IO Expander"
+ depends on I2C
+ help
+ Say Y here if you want to use a ADP5588/87 attached to your
+ system I2C bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called adp5588-keys.
+
+config KEYBOARD_ADP5589
+ tristate "ADP5585/ADP5589 I2C QWERTY Keypad and IO Expander"
+ depends on I2C
+ help
+ Say Y here if you want to use a ADP5585/ADP5589 attached to your
+ system I2C bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called adp5589-keys.
+
+config KEYBOARD_AMIGA
+ tristate "Amiga keyboard"
+ depends on AMIGA
+ help
+ Say Y here if you are running Linux on any AMIGA and have a keyboard
+ attached.
+
+ To compile this driver as a module, choose M here: the
+ module will be called amikbd.
+
+config ATARI_KBD_CORE
+ bool
+
+config KEYBOARD_ATARI
+ tristate "Atari keyboard"
+ depends on ATARI
+ select ATARI_KBD_CORE
+ help
+ Say Y here if you are running Linux on any Atari and have a keyboard
+ attached.
+
+ To compile this driver as a module, choose M here: the
+ module will be called atakbd.
+
+config KEYBOARD_ATKBD
+ tristate "AT keyboard"
+ default y
+ select SERIO
+ select SERIO_LIBPS2
+ select SERIO_I8042 if ARCH_MIGHT_HAVE_PC_SERIO
+ select SERIO_GSCPS2 if GSC
+ help
+ Say Y here if you want to use a standard AT or PS/2 keyboard. Usually
+ you'll need this, unless you have a different type keyboard (USB, ADB
+ or other). This also works for AT and PS/2 keyboards connected over a
+ PS/2 to serial converter.
+
+ If unsure, say Y.
+
+ To compile this driver as a module, choose M here: the
+ module will be called atkbd.
+
+config KEYBOARD_ATKBD_HP_KEYCODES
+ bool "Use HP keyboard scancodes"
+ depends on PARISC && KEYBOARD_ATKBD
+ default y
+ help
+ Say Y here if you have a PA-RISC machine and want to use an AT or
+ PS/2 keyboard, and your keyboard uses keycodes that are specific to
+ PA-RISC keyboards.
+
+ Say N if you use a standard keyboard.
+
+config KEYBOARD_ATKBD_RDI_KEYCODES
+ bool "Use PrecisionBook keyboard scancodes"
+ depends on KEYBOARD_ATKBD_HP_KEYCODES
+ default n
+ help
+ If you have an RDI PrecisionBook, say Y here if you want to use its
+ built-in keyboard (as opposed to an external keyboard).
+
+ The PrecisionBook has five keys that conflict with those used by most
+ AT and PS/2 keyboards. These are as follows:
+
+ PrecisionBook Standard AT or PS/2
+
+ F1 F12
+ Left Ctrl Left Alt
+ Caps Lock Left Ctrl
+ Right Ctrl Caps Lock
+ Left 102nd key (the key to the right of Left Shift)
+
+ If you say N here, and use the PrecisionBook keyboard, then each key
+ in the left-hand column will be interpreted as the corresponding key
+ in the right-hand column.
+
+ If you say Y here, and use an external keyboard, then each key in the
+ right-hand column will be interpreted as the key shown in the
+ left-hand column.
+
+config KEYBOARD_QT1070
+ tristate "Atmel AT42QT1070 Touch Sensor Chip"
+ depends on I2C
+ help
+ Say Y here if you want to use Atmel AT42QT1070 QTouch
+ Sensor chip as input device.
+
+ To compile this driver as a module, choose M here:
+ the module will be called qt1070
+
+config KEYBOARD_QT2160
+ tristate "Atmel AT42QT2160 Touch Sensor Chip"
+ depends on I2C
+ help
+ If you say yes here you get support for Atmel AT42QT2160 Touch
+ Sensor chip as a keyboard input.
+
+ This driver can also be built as a module. If so, the module
+ will be called qt2160.
+
+config KEYBOARD_BFIN
+ tristate "Blackfin BF54x keypad support"
+ depends on (BF54x && !BF544)
+ help
+ Say Y here if you want to use the BF54x keypad.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bf54x-keys.
+
+config KEYBOARD_CLPS711X
+ tristate "CLPS711X Keypad support"
+ depends on OF_GPIO && (ARCH_CLPS711X || COMPILE_TEST)
+ select INPUT_MATRIXKMAP
+ select INPUT_POLLDEV
+ help
+ Say Y here to enable the matrix keypad on the Cirrus Logic
+ CLPS711X CPUs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called clps711x-keypad.
+
+config KEYBOARD_LKKBD
+ tristate "DECstation/VAXstation LK201/LK401 keyboard"
+ select SERIO
+ help
+ Say Y here if you want to use a LK201 or LK401 style serial
+ keyboard. This keyboard is also useable on PCs if you attach
+ it with the inputattach program. The connector pinout is
+ described within lkkbd.c.
+
+ To compile this driver as a module, choose M here: the
+ module will be called lkkbd.
+
+config KEYBOARD_EP93XX
+ tristate "EP93xx Matrix Keypad support"
+ depends on ARCH_EP93XX
+ select INPUT_MATRIXKMAP
+ help
+ Say Y here to enable the matrix keypad on the Cirrus EP93XX.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ep93xx_keypad.
+
+config KEYBOARD_GPIO
+ tristate "GPIO Buttons"
+ depends on GPIOLIB
+ help
+ This driver implements support for buttons connected
+ to GPIO pins of various CPUs (and some other chips).
+
+ Say Y here if your device has buttons connected
+ directly to such GPIO pins. Your board-specific
+ setup logic must also provide a platform device,
+ with configuration data saying which GPIOs are used.
+
+ To compile this driver as a module, choose M here: the
+ module will be called gpio_keys.
+
+config KEYBOARD_GPIO_POLLED
+ tristate "Polled GPIO buttons"
+ depends on GPIOLIB
+ select INPUT_POLLDEV
+ help
+ This driver implements support for buttons connected
+ to GPIO pins that are not capable of generating interrupts.
+
+ Say Y here if your device has buttons connected
+ directly to such GPIO pins. Your board-specific
+ setup logic must also provide a platform device,
+ with configuration data saying which GPIOs are used.
+
+ To compile this driver as a module, choose M here: the
+ module will be called gpio_keys_polled.
+
+config KEYBOARD_TCA6416
+ tristate "TCA6416/TCA6408A Keypad Support"
+ depends on I2C
+ help
+ This driver implements basic keypad functionality
+ for keys connected through TCA6416/TCA6408A IO expanders.
+
+ Say Y here if your device has keys connected to
+ TCA6416/TCA6408A IO expander. Your board-specific setup logic
+ must also provide pin-mask details(of which TCA6416 pins
+ are used for keypad).
+
+ If enabled the entire TCA6416 device will be managed through
+ this driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tca6416_keypad.
+
+config KEYBOARD_TCA8418
+ tristate "TCA8418 Keypad Support"
+ depends on I2C
+ select INPUT_MATRIXKMAP
+ help
+ This driver implements basic keypad functionality
+ for keys connected through TCA8418 keypad decoder.
+
+ Say Y here if your device has keys connected to
+ TCA8418 keypad decoder.
+
+ If enabled the complete TCA8418 device will be managed through
+ this driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tca8418_keypad.
+
+config KEYBOARD_MATRIX
+ tristate "GPIO driven matrix keypad support"
+ depends on GPIOLIB
+ select INPUT_MATRIXKMAP
+ help
+ Enable support for GPIO driven matrix keypad.
+
+ To compile this driver as a module, choose M here: the
+ module will be called matrix_keypad.
+
+config KEYBOARD_HIL_OLD
+ tristate "HP HIL keyboard support (simple driver)"
+ depends on GSC || HP300
+ default y
+ help
+ The "Human Interface Loop" is a older, 8-channel USB-like
+ controller used in several Hewlett Packard models. This driver
+ was adapted from the one written for m68k/hp300, and implements
+ support for a keyboard attached to the HIL port, but not for
+ any other types of HIL input devices like mice or tablets.
+ However, it has been thoroughly tested and is stable.
+
+ If you want full HIL support including support for multiple
+ keyboards, mice, and tablets, you have to enable the
+ "HP System Device Controller i8042 Support" in the input/serio
+ submenu.
+
+config KEYBOARD_HIL
+ tristate "HP HIL keyboard/pointer support"
+ depends on GSC || HP300
+ default y
+ select HP_SDC
+ select HIL_MLC
+ select SERIO
+ help
+ The "Human Interface Loop" is a older, 8-channel USB-like
+ controller used in several Hewlett Packard models.
+ This driver implements support for HIL-keyboards and pointing
+ devices (mice, tablets, touchscreens) attached
+ to your machine, so normally you should say Y here.
+
+config KEYBOARD_HP6XX
+ tristate "HP Jornada 6xx keyboard"
+ depends on SH_HP6XX
+ select INPUT_POLLDEV
+ help
+ Say Y here if you have a HP Jornada 620/660/680/690 and want to
+ support the built-in keyboard.
+
+ To compile this driver as a module, choose M here: the
+ module will be called jornada680_kbd.
+
+config KEYBOARD_HP7XX
+ tristate "HP Jornada 7xx keyboard"
+ depends on SA1100_JORNADA720_SSP && SA1100_SSP
+ help
+ Say Y here if you have a HP Jornada 710/720/728 and want to
+ support the built-in keyboard.
+
+ To compile this driver as a module, choose M here: the
+ module will be called jornada720_kbd.
+
+config KEYBOARD_LM8323
+ tristate "LM8323 keypad chip"
+ depends on I2C
+ depends on LEDS_CLASS
+ help
+ If you say yes here you get support for the National Semiconductor
+ LM8323 keypad controller.
+
+ To compile this driver as a module, choose M here: the
+ module will be called lm8323.
+
+config KEYBOARD_LM8333
+ tristate "LM8333 keypad chip"
+ depends on I2C
+ select INPUT_MATRIXKMAP
+ help
+ If you say yes here you get support for the National Semiconductor
+ LM8333 keypad controller.
+
+ To compile this driver as a module, choose M here: the
+ module will be called lm8333.
+
+config KEYBOARD_LOCOMO
+ tristate "LoCoMo Keyboard Support"
+ depends on SHARP_LOCOMO
+ help
+ Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA
+
+ To compile this driver as a module, choose M here: the
+ module will be called locomokbd.
+
+config KEYBOARD_LPC32XX
+ tristate "LPC32XX matrix key scanner support"
+ depends on ARCH_LPC32XX && OF
+ select INPUT_MATRIXKMAP
+ help
+ Say Y here if you want to use NXP LPC32XX SoC key scanner interface,
+ connected to a key matrix.
+
+ To compile this driver as a module, choose M here: the
+ module will be called lpc32xx-keys.
+
+config KEYBOARD_MAPLE
+ tristate "Maple bus keyboard"
+ depends on SH_DREAMCAST && MAPLE
+ help
+ Say Y here if you have a Dreamcast console running Linux and have
+ a keyboard attached to its Maple bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called maple_keyb.
+
+config KEYBOARD_MAX7359
+ tristate "Maxim MAX7359 Key Switch Controller"
+ depends on I2C
+ help
+ If you say yes here you get support for the Maxim MAX7359 Key
+ Switch Controller chip. This providers microprocessors with
+ management of up to 64 key switches
+
+ To compile this driver as a module, choose M here: the
+ module will be called max7359_keypad.
+
+config KEYBOARD_MCS
+ tristate "MELFAS MCS Touchkey"
+ depends on I2C
+ help
+ Say Y here if you have the MELFAS MCS5000/5080 touchkey controller
+ chip in your system.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mcs_touchkey.
+
+config KEYBOARD_MPR121
+ tristate "Freescale MPR121 Touchkey"
+ depends on I2C
+ help
+ Say Y here if you have Freescale MPR121 touchkey controller
+ chip in your system.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mpr121_touchkey.
+
+config KEYBOARD_IMX
+ tristate "IMX keypad support"
+ depends on ARCH_MXC
+ select INPUT_MATRIXKMAP
+ help
+ Enable support for IMX keypad port.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imx_keypad.
+
+config KEYBOARD_NEWTON
+ tristate "Newton keyboard"
+ select SERIO
+ help
+ Say Y here if you have a Newton keyboard on a serial port.
+
+ To compile this driver as a module, choose M here: the
+ module will be called newtonkbd.
+
+config KEYBOARD_NOMADIK
+ tristate "ST-Ericsson Nomadik SKE keyboard"
+ depends on (ARCH_NOMADIK || ARCH_U8500)
+ select INPUT_MATRIXKMAP
+ help
+ Say Y here if you want to use a keypad provided on the SKE controller
+ used on the Ux500 and Nomadik platforms
+
+ To compile this driver as a module, choose M here: the
+ module will be called nmk-ske-keypad.
+
+config KEYBOARD_NSPIRE
+ tristate "TI-NSPIRE built-in keyboard"
+ depends on ARCH_NSPIRE && OF
+ select INPUT_MATRIXKMAP
+ help
+ Say Y here if you want to use the built-in keypad on TI-NSPIRE.
+
+ To compile this driver as a module, choose M here: the
+ module will be called nspire-keypad.
+
+config KEYBOARD_TEGRA
+ tristate "NVIDIA Tegra internal matrix keyboard controller support"
+ depends on ARCH_TEGRA && OF
+ select INPUT_MATRIXKMAP
+ help
+ Say Y here if you want to use a matrix keyboard connected directly
+ to the internal keyboard controller on Tegra SoCs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tegra-kbc.
+
+config KEYBOARD_OPENCORES
+ tristate "OpenCores Keyboard Controller"
+ depends on HAS_IOMEM
+ help
+ Say Y here if you want to use the OpenCores Keyboard Controller
+ http://www.opencores.org/project,keyboardcontroller
+
+ To compile this driver as a module, choose M here; the
+ module will be called opencores-kbd.
+
+config KEYBOARD_PXA27x
+ tristate "PXA27x/PXA3xx keypad support"
+ depends on PXA27x || PXA3xx || ARCH_MMP
+ select INPUT_MATRIXKMAP
+ help
+ Enable support for PXA27x/PXA3xx keypad controller.
+
+ To compile this driver as a module, choose M here: the
+ module will be called pxa27x_keypad.
+
+config KEYBOARD_PXA930_ROTARY
+ tristate "PXA930/PXA935 Enhanced Rotary Controller Support"
+ depends on CPU_PXA930 || CPU_PXA935
+ help
+ Enable support for PXA930/PXA935 Enhanced Rotary Controller.
+
+ To compile this driver as a module, choose M here: the
+ module will be called pxa930_rotary.
+
+config KEYBOARD_PMIC8XXX
+ tristate "Qualcomm PMIC8XXX keypad support"
+ depends on MFD_PM8XXX
+ select INPUT_MATRIXKMAP
+ help
+ Say Y here if you want to enable the driver for the PMIC8XXX
+ keypad provided as a reference design from Qualcomm. This is intended
+ to support upto 18x8 matrix based keypad design.
+
+ To compile this driver as a module, choose M here: the module will
+ be called pmic8xxx-keypad.
+
+config KEYBOARD_SAMSUNG
+ tristate "Samsung keypad support"
+ depends on HAVE_CLK
+ select INPUT_MATRIXKMAP
+ help
+ Say Y here if you want to use the keypad on your Samsung mobile
+ device.
+
+ To compile this driver as a module, choose M here: the
+ module will be called samsung-keypad.
+
+config KEYBOARD_GOLDFISH_EVENTS
+ depends on GOLDFISH
+ tristate "Generic Input Event device for Goldfish"
+ help
+ Say Y here to get an input event device for the Goldfish virtual
+ device emulator.
+
+ To compile this driver as a module, choose M here: the
+ module will be called goldfish-events.
+
+config KEYBOARD_STOWAWAY
+ tristate "Stowaway keyboard"
+ select SERIO
+ help
+ Say Y here if you have a Stowaway keyboard on a serial port.
+ Stowaway compatible keyboards like Dicota Input-PDA keyboard
+ are also supported by this driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called stowaway.
+
+config KEYBOARD_ST_KEYSCAN
+ tristate "STMicroelectronics keyscan support"
+ depends on ARCH_STI || COMPILE_TEST
+ select INPUT_MATRIXKMAP
+ help
+ Say Y here if you want to use a keypad attached to the keyscan block
+ on some STMicroelectronics SoC devices.
+
+ To compile this driver as a module, choose M here: the
+ module will be called st-keyscan.
+
+config KEYBOARD_SUNKBD
+ tristate "Sun Type 4 and Type 5 keyboard"
+ select SERIO
+ help
+ Say Y here if you want to use a Sun Type 4 or Type 5 keyboard,
+ connected either to the Sun keyboard connector or to an serial
+ (RS-232) port via a simple adapter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called sunkbd.
+
+config KEYBOARD_SH_KEYSC
+ tristate "SuperH KEYSC keypad support"
+ depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST
+ help
+ Say Y here if you want to use a keypad attached to the KEYSC block
+ on SuperH processors such as sh7722 and sh7343.
+
+ To compile this driver as a module, choose M here: the
+ module will be called sh_keysc.
+
+config KEYBOARD_STMPE
+ tristate "STMPE keypad support"
+ depends on MFD_STMPE
+ depends on OF
+ select INPUT_MATRIXKMAP
+ help
+ Say Y here if you want to use the keypad controller on STMPE I/O
+ expanders.
+
+ To compile this driver as a module, choose M here: the module will be
+ called stmpe-keypad.
+
+config KEYBOARD_SUN4I_LRADC
+ tristate "Allwinner sun4i low res adc attached tablet keys support"
+ depends on ARCH_SUNXI
+ help
+ This selects support for the Allwinner low res adc attached tablet
+ keys found on Allwinner sunxi SoCs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called sun4i-lradc-keys.
+
+config KEYBOARD_DAVINCI
+ tristate "TI DaVinci Key Scan"
+ depends on ARCH_DAVINCI_DM365
+ help
+ Say Y to enable keypad module support for the TI DaVinci
+ platforms (DM365).
+
+ To compile this driver as a module, choose M here: the
+ module will be called davinci_keyscan.
+
+config KEYBOARD_IPAQ_MICRO
+ tristate "Buttons on Micro SoC (iPaq h3100,h3600,h3700)"
+ depends on MFD_IPAQ_MICRO
+ help
+ Say Y to enable support for the buttons attached to
+ Micro peripheral controller on iPAQ h3100/h3600/h3700
+
+ To compile this driver as a module, choose M here: the
+ module will be called ipaq-micro-keys.
+
+config KEYBOARD_OMAP
+ tristate "TI OMAP keypad support"
+ depends on ARCH_OMAP1
+ select INPUT_MATRIXKMAP
+ help
+ Say Y here if you want to use the OMAP keypad.
+
+ To compile this driver as a module, choose M here: the
+ module will be called omap-keypad.
+
+config KEYBOARD_OMAP4
+ tristate "TI OMAP4+ keypad support"
+ depends on OF || ARCH_OMAP2PLUS
+ select INPUT_MATRIXKMAP
+ help
+ Say Y here if you want to use the OMAP4+ keypad.
+
+ To compile this driver as a module, choose M here: the
+ module will be called omap4-keypad.
+
+config KEYBOARD_SPEAR
+ tristate "ST SPEAR keyboard support"
+ depends on PLAT_SPEAR
+ select INPUT_MATRIXKMAP
+ help
+ Say Y here if you want to use the SPEAR keyboard.
+
+ To compile this driver as a module, choose M here: the
+ module will be called spear-keboard.
+
+config KEYBOARD_TC3589X
+ tristate "TC3589X Keypad support"
+ depends on MFD_TC3589X
+ select INPUT_MATRIXKMAP
+ help
+ Say Y here if you want to use the keypad controller on
+ TC35892/3 I/O expander.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tc3589x-keypad.
+
+config KEYBOARD_TWL4030
+ tristate "TI TWL4030/TWL5030/TPS659x0 keypad support"
+ depends on TWL4030_CORE
+ select INPUT_MATRIXKMAP
+ help
+ Say Y here if your board use the keypad controller on
+ TWL4030 family chips. It's safe to say enable this
+ even on boards that don't use the keypad controller.
+
+ To compile this driver as a module, choose M here: the
+ module will be called twl4030_keypad.
+
+config KEYBOARD_XTKBD
+ tristate "XT keyboard"
+ select SERIO
+ help
+ Say Y here if you want to use the old IBM PC/XT keyboard (or
+ compatible) on your system. This is only possible with a
+ parallel port keyboard adapter, you cannot connect it to the
+ keyboard port on a PC that runs Linux.
+
+ To compile this driver as a module, choose M here: the
+ module will be called xtkbd.
+
+config KEYBOARD_W90P910
+ tristate "W90P910 Matrix Keypad support"
+ depends on ARCH_W90X900
+ select INPUT_MATRIXKMAP
+ help
+ Say Y here to enable the matrix keypad on evaluation board
+ based on W90P910.
+
+ To compile this driver as a module, choose M here: the
+ module will be called w90p910_keypad.
+
+config KEYBOARD_CROS_EC
+ tristate "ChromeOS EC keyboard"
+ select INPUT_MATRIXKMAP
+ depends on MFD_CROS_EC
+ help
+ Say Y here to enable the matrix keyboard used by ChromeOS devices
+ and implemented on the ChromeOS EC. You must enable one bus option
+ (MFD_CROS_EC_I2C or MFD_CROS_EC_SPI) to use this.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cros_ec_keyb.
+
+config KEYBOARD_CAP11XX
+ tristate "Microchip CAP11XX based touch sensors"
+ depends on OF && I2C
+ select REGMAP_I2C
+ help
+ Say Y here to enable the CAP11XX touch sensor driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cap11xx.
+
+config KEYBOARD_BCM
+ tristate "Broadcom keypad driver"
+ depends on OF && HAVE_CLK
+ select INPUT_MATRIXKMAP
+ default ARCH_BCM_CYGNUS
+ help
+ Say Y here if you want to use Broadcom keypad.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bcm-keypad.
+
+endif
Code Review / kvmfornfv.git / blobdiff