--- /dev/null
+/*
+ * Copyright (c) 2004 Topspin Communications. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/errno.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+
+#include "mthca_dev.h"
+#include "mthca_cmd.h"
+
+int mthca_reset(struct mthca_dev *mdev)
+{
+ int i;
+ int err = 0;
+ u32 *hca_header = NULL;
+ u32 *bridge_header = NULL;
+ struct pci_dev *bridge = NULL;
+ int bridge_pcix_cap = 0;
+ int hca_pcie_cap = 0;
+ int hca_pcix_cap = 0;
+
+ u16 devctl;
+ u16 linkctl;
+
+#define MTHCA_RESET_OFFSET 0xf0010
+#define MTHCA_RESET_VALUE swab32(1)
+
+ /*
+ * Reset the chip. This is somewhat ugly because we have to
+ * save off the PCI header before reset and then restore it
+ * after the chip reboots. We skip config space offsets 22
+ * and 23 since those have a special meaning.
+ *
+ * To make matters worse, for Tavor (PCI-X HCA) we have to
+ * find the associated bridge device and save off its PCI
+ * header as well.
+ */
+
+ if (!(mdev->mthca_flags & MTHCA_FLAG_PCIE)) {
+ /* Look for the bridge -- its device ID will be 2 more
+ than HCA's device ID. */
+ while ((bridge = pci_get_device(mdev->pdev->vendor,
+ mdev->pdev->device + 2,
+ bridge)) != NULL) {
+ if (bridge->hdr_type == PCI_HEADER_TYPE_BRIDGE &&
+ bridge->subordinate == mdev->pdev->bus) {
+ mthca_dbg(mdev, "Found bridge: %s\n",
+ pci_name(bridge));
+ break;
+ }
+ }
+
+ if (!bridge) {
+ /*
+ * Didn't find a bridge for a Tavor device --
+ * assume we're in no-bridge mode and hope for
+ * the best.
+ */
+ mthca_warn(mdev, "No bridge found for %s\n",
+ pci_name(mdev->pdev));
+ }
+
+ }
+
+ /* For Arbel do we need to save off the full 4K PCI Express header?? */
+ hca_header = kmalloc(256, GFP_KERNEL);
+ if (!hca_header) {
+ err = -ENOMEM;
+ mthca_err(mdev, "Couldn't allocate memory to save HCA "
+ "PCI header, aborting.\n");
+ goto out;
+ }
+
+ for (i = 0; i < 64; ++i) {
+ if (i == 22 || i == 23)
+ continue;
+ if (pci_read_config_dword(mdev->pdev, i * 4, hca_header + i)) {
+ err = -ENODEV;
+ mthca_err(mdev, "Couldn't save HCA "
+ "PCI header, aborting.\n");
+ goto out;
+ }
+ }
+
+ hca_pcix_cap = pci_find_capability(mdev->pdev, PCI_CAP_ID_PCIX);
+ hca_pcie_cap = pci_pcie_cap(mdev->pdev);
+
+ if (bridge) {
+ bridge_header = kmalloc(256, GFP_KERNEL);
+ if (!bridge_header) {
+ err = -ENOMEM;
+ mthca_err(mdev, "Couldn't allocate memory to save HCA "
+ "bridge PCI header, aborting.\n");
+ goto out;
+ }
+
+ for (i = 0; i < 64; ++i) {
+ if (i == 22 || i == 23)
+ continue;
+ if (pci_read_config_dword(bridge, i * 4, bridge_header + i)) {
+ err = -ENODEV;
+ mthca_err(mdev, "Couldn't save HCA bridge "
+ "PCI header, aborting.\n");
+ goto out;
+ }
+ }
+ bridge_pcix_cap = pci_find_capability(bridge, PCI_CAP_ID_PCIX);
+ if (!bridge_pcix_cap) {
+ err = -ENODEV;
+ mthca_err(mdev, "Couldn't locate HCA bridge "
+ "PCI-X capability, aborting.\n");
+ goto out;
+ }
+ }
+
+ /* actually hit reset */
+ {
+ void __iomem *reset = ioremap(pci_resource_start(mdev->pdev, 0) +
+ MTHCA_RESET_OFFSET, 4);
+
+ if (!reset) {
+ err = -ENOMEM;
+ mthca_err(mdev, "Couldn't map HCA reset register, "
+ "aborting.\n");
+ goto out;
+ }
+
+ writel(MTHCA_RESET_VALUE, reset);
+ iounmap(reset);
+ }
+
+ /* Docs say to wait one second before accessing device */
+ msleep(1000);
+
+ /* Now wait for PCI device to start responding again */
+ {
+ u32 v;
+ int c = 0;
+
+ for (c = 0; c < 100; ++c) {
+ if (pci_read_config_dword(bridge ? bridge : mdev->pdev, 0, &v)) {
+ err = -ENODEV;
+ mthca_err(mdev, "Couldn't access HCA after reset, "
+ "aborting.\n");
+ goto out;
+ }
+
+ if (v != 0xffffffff)
+ goto good;
+
+ msleep(100);
+ }
+
+ err = -ENODEV;
+ mthca_err(mdev, "PCI device did not come back after reset, "
+ "aborting.\n");
+ goto out;
+ }
+
+good:
+ /* Now restore the PCI headers */
+ if (bridge) {
+ if (pci_write_config_dword(bridge, bridge_pcix_cap + 0x8,
+ bridge_header[(bridge_pcix_cap + 0x8) / 4])) {
+ err = -ENODEV;
+ mthca_err(mdev, "Couldn't restore HCA bridge Upstream "
+ "split transaction control, aborting.\n");
+ goto out;
+ }
+ if (pci_write_config_dword(bridge, bridge_pcix_cap + 0xc,
+ bridge_header[(bridge_pcix_cap + 0xc) / 4])) {
+ err = -ENODEV;
+ mthca_err(mdev, "Couldn't restore HCA bridge Downstream "
+ "split transaction control, aborting.\n");
+ goto out;
+ }
+ /*
+ * Bridge control register is at 0x3e, so we'll
+ * naturally restore it last in this loop.
+ */
+ for (i = 0; i < 16; ++i) {
+ if (i * 4 == PCI_COMMAND)
+ continue;
+
+ if (pci_write_config_dword(bridge, i * 4, bridge_header[i])) {
+ err = -ENODEV;
+ mthca_err(mdev, "Couldn't restore HCA bridge reg %x, "
+ "aborting.\n", i);
+ goto out;
+ }
+ }
+
+ if (pci_write_config_dword(bridge, PCI_COMMAND,
+ bridge_header[PCI_COMMAND / 4])) {
+ err = -ENODEV;
+ mthca_err(mdev, "Couldn't restore HCA bridge COMMAND, "
+ "aborting.\n");
+ goto out;
+ }
+ }
+
+ if (hca_pcix_cap) {
+ if (pci_write_config_dword(mdev->pdev, hca_pcix_cap,
+ hca_header[hca_pcix_cap / 4])) {
+ err = -ENODEV;
+ mthca_err(mdev, "Couldn't restore HCA PCI-X "
+ "command register, aborting.\n");
+ goto out;
+ }
+ }
+
+ if (hca_pcie_cap) {
+ devctl = hca_header[(hca_pcie_cap + PCI_EXP_DEVCTL) / 4];
+ if (pcie_capability_write_word(mdev->pdev, PCI_EXP_DEVCTL,
+ devctl)) {
+ err = -ENODEV;
+ mthca_err(mdev, "Couldn't restore HCA PCI Express "
+ "Device Control register, aborting.\n");
+ goto out;
+ }
+ linkctl = hca_header[(hca_pcie_cap + PCI_EXP_LNKCTL) / 4];
+ if (pcie_capability_write_word(mdev->pdev, PCI_EXP_LNKCTL,
+ linkctl)) {
+ err = -ENODEV;
+ mthca_err(mdev, "Couldn't restore HCA PCI Express "
+ "Link control register, aborting.\n");
+ goto out;
+ }
+ }
+
+ for (i = 0; i < 16; ++i) {
+ if (i * 4 == PCI_COMMAND)
+ continue;
+
+ if (pci_write_config_dword(mdev->pdev, i * 4, hca_header[i])) {
+ err = -ENODEV;
+ mthca_err(mdev, "Couldn't restore HCA reg %x, "
+ "aborting.\n", i);
+ goto out;
+ }
+ }
+
+ if (pci_write_config_dword(mdev->pdev, PCI_COMMAND,
+ hca_header[PCI_COMMAND / 4])) {
+ err = -ENODEV;
+ mthca_err(mdev, "Couldn't restore HCA COMMAND, "
+ "aborting.\n");
+ goto out;
+ }
+
+out:
+ if (bridge)
+ pci_dev_put(bridge);
+ kfree(bridge_header);
+ kfree(hca_header);
+
+ return err;
+}
Code Review / kvmfornfv.git / blobdiff