+++ /dev/null
-/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
- * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-/*
- * This file is conditionally built on x86_64 only. Otherwise weak symbol
- * versions of the functions exported from here are used.
- */
-
-#include <linux/pci.h>
-#include <asm/mtrr.h>
-#include <asm/processor.h>
-
-#include "ipath_kernel.h"
-
-/**
- * ipath_enable_wc - enable write combining for MMIO writes to the device
- * @dd: infinipath device
- *
- * This routine is x86_64-specific; it twiddles the CPU's MTRRs to enable
- * write combining.
- */
-int ipath_enable_wc(struct ipath_devdata *dd)
-{
- int ret = 0;
- u64 pioaddr, piolen;
- unsigned bits;
- const unsigned long addr = pci_resource_start(dd->pcidev, 0);
- const size_t len = pci_resource_len(dd->pcidev, 0);
-
- /*
- * Set the PIO buffers to be WCCOMB, so we get HT bursts to the
- * chip. Linux (possibly the hardware) requires it to be on a power
- * of 2 address matching the length (which has to be a power of 2).
- * For rev1, that means the base address, for rev2, it will be just
- * the PIO buffers themselves.
- * For chips with two sets of buffers, the calculations are
- * somewhat more complicated; we need to sum, and the piobufbase
- * register has both offsets, 2K in low 32 bits, 4K in high 32 bits.
- * The buffers are still packed, so a single range covers both.
- */
- if (dd->ipath_piobcnt2k && dd->ipath_piobcnt4k) { /* 2 sizes */
- unsigned long pio2kbase, pio4kbase;
- pio2kbase = dd->ipath_piobufbase & 0xffffffffUL;
- pio4kbase = (dd->ipath_piobufbase >> 32) & 0xffffffffUL;
- if (pio2kbase < pio4kbase) { /* all, for now */
- pioaddr = addr + pio2kbase;
- piolen = pio4kbase - pio2kbase +
- dd->ipath_piobcnt4k * dd->ipath_4kalign;
- } else {
- pioaddr = addr + pio4kbase;
- piolen = pio2kbase - pio4kbase +
- dd->ipath_piobcnt2k * dd->ipath_palign;
- }
- } else { /* single buffer size (2K, currently) */
- pioaddr = addr + dd->ipath_piobufbase;
- piolen = dd->ipath_piobcnt2k * dd->ipath_palign +
- dd->ipath_piobcnt4k * dd->ipath_4kalign;
- }
-
- for (bits = 0; !(piolen & (1ULL << bits)); bits++)
- /* do nothing */ ;
-
- if (piolen != (1ULL << bits)) {
- piolen >>= bits;
- while (piolen >>= 1)
- bits++;
- piolen = 1ULL << (bits + 1);
- }
- if (pioaddr & (piolen - 1)) {
- u64 atmp;
- ipath_dbg("pioaddr %llx not on right boundary for size "
- "%llx, fixing\n",
- (unsigned long long) pioaddr,
- (unsigned long long) piolen);
- atmp = pioaddr & ~(piolen - 1);
- if (atmp < addr || (atmp + piolen) > (addr + len)) {
- ipath_dev_err(dd, "No way to align address/size "
- "(%llx/%llx), no WC mtrr\n",
- (unsigned long long) atmp,
- (unsigned long long) piolen << 1);
- ret = -ENODEV;
- } else {
- ipath_dbg("changing WC base from %llx to %llx, "
- "len from %llx to %llx\n",
- (unsigned long long) pioaddr,
- (unsigned long long) atmp,
- (unsigned long long) piolen,
- (unsigned long long) piolen << 1);
- pioaddr = atmp;
- piolen <<= 1;
- }
- }
-
- if (!ret) {
- int cookie;
- ipath_cdbg(VERBOSE, "Setting mtrr for chip to WC "
- "(addr %llx, len=0x%llx)\n",
- (unsigned long long) pioaddr,
- (unsigned long long) piolen);
- cookie = mtrr_add(pioaddr, piolen, MTRR_TYPE_WRCOMB, 0);
- if (cookie < 0) {
- {
- dev_info(&dd->pcidev->dev,
- "mtrr_add() WC for PIO bufs "
- "failed (%d)\n",
- cookie);
- ret = -EINVAL;
- }
- } else {
- ipath_cdbg(VERBOSE, "Set mtrr for chip to WC, "
- "cookie is %d\n", cookie);
- dd->ipath_wc_cookie = cookie;
- dd->ipath_wc_base = (unsigned long) pioaddr;
- dd->ipath_wc_len = (unsigned long) piolen;
- }
- }
-
- return ret;
-}
-
-/**
- * ipath_disable_wc - disable write combining for MMIO writes to the device
- * @dd: infinipath device
- */
-void ipath_disable_wc(struct ipath_devdata *dd)
-{
- if (dd->ipath_wc_cookie) {
- int r;
- ipath_cdbg(VERBOSE, "undoing WCCOMB on pio buffers\n");
- r = mtrr_del(dd->ipath_wc_cookie, dd->ipath_wc_base,
- dd->ipath_wc_len);
- if (r < 0)
- dev_info(&dd->pcidev->dev,
- "mtrr_del(%lx, %lx, %lx) failed: %d\n",
- dd->ipath_wc_cookie, dd->ipath_wc_base,
- dd->ipath_wc_len, r);
- dd->ipath_wc_cookie = 0; /* even on failure */
- }
-}
Code Review / kvmfornfv.git / blobdiff